welcome - Page 108 - Developer IT

GPU Debugging with VS 11

- by Daniel Moth

With VS 11 Developer Preview we have invested tremendously in parallel debugging for both CPU (managed and native) and GPU debugging. I'll be doing a whole bunch of blog posts on those topics, and in this post I just wanted to get people started with GPU debugging, i.e. with debugging C++ AMP code. First I invite you to watch 6 minutes of a glimpse of the C++ AMP debugging experience though this video (ffw to minute 51:54, up until minute 59:16). Don't read the rest of this post, just go watch that video, ideally download the High Quality WMV. Summary GPU debugging essentially means debugging the lambda that you pass to the parallel_for_each call (plus any functions you call from the lambda, of course). CPU debugging means debugging all the code above and below the parallel_for_each call, i.e. all the code except the restrict(direct3d) lambda and the functions that it calls. With VS 11 you have to choose what debugger you want to use for a particular debugging session, CPU or GPU. So you can place breakpoints all over your code, then choose what debugger you want (CPU or GPU), and you'll only be able to hit breakpoints for the code type that the debugger engine understands – the remaining breakpoints will appear as unbound. If you want to hit the unbound breakpoints, you'd have to stop debugging, and start again with the other debugger. Sorry. We suck. We know. But once you are past that limitation, I think you'll find the experience truly rewarding – seriously! Switching debugger engines With the Developer Preview bits, one way to switch the debugger engine is through the project properties – see the screenshots that follow. This one is showing the CPU option selected, which is basically the default that you are all familiar with: This screenshot is showing the GPU option selected, by changing the debugger launcher (notice that this applies for both the local and remote case): You actually do not have to open the project properties just for switching the debugger engine, you can switch the selection from the toolbar in VS 11 Developer Preview too – see following screenshot (the effect is the same as if you opened the project properties and switched there) Breakpoint behavior Here are two screenshots, one showing a debugging session for CPU and the other a debugging session for GPU (notice the unbound breakpoints in each case) …and here is the GPU case (where we cannot bind the CPU breakpoints but can the GPU breakpoint, which is actually hit) Give C++ AMP debugging a try So to debug your C++ AMP code, pull down the drop down under the 'play' button to select the 'GPU C++ Direct3D Compute Debugger' menu option, then hit F5 (or the 'play' button itself). Then you can explore debugging by exploring the menus under the Debug and under the Debug->Windows menus. One way to do that exploration is through the C++ AMP debugging walkthrough on MSDN. Another way to explore the C++ AMP debugging experience, you can use the moth.cpp code file, which is what I used in my BUILD session debugger demo. Note that for my demo I was using the latest internal VS11 bits, so your experience with the Developer Preview bits won't be identical to what you saw me demonstrate, but it shouldn't be far off. Stay tuned for a lot more content on the parallel debugger in VS 11, both CPU and GPU, both managed and native. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Make Your PC Look Like Windows Phone 7

- by Matthew Guay

Windows Phone 7 offers a unique and exciting UI that displays lots of information efficiently on the screen. And with a simple Rainmeter theme, you can have the same UI and content directly on your Windows 7 desktop. Turn your Desktop into a Windows Phone 7 lookalike To give your Windows 7 desktop a Windows Phone 7 makeover, first you need to have the free Rainmeter application installed. If you do not have it installed, download it from the link below and run the setup. Accept the license agreement, and install it with the default settings. By default Rainmeter will automatically run when you start your computer. If you do not want this, you can uncheck the box during the setup. Now, download the Omnimo UI theme for Rainmeter (link below). You will need to unzip the folder first. This theme uses the Segoe UI and the Segoe UI Light font, so Windows Vista users need to install the segoeuil.ttf font first, and XP users need to install both the segoeui.ttf and the segoeuil.ttf font first. Copy the appropriate fonts to C:\Windows\Fonts, or in Vista double-click on the font and select Install. Now, run the Rainmeter theme setup. Double-click on the Rainstaller.exe in the Omnimo folder. Click Express install to add the theme and skin to Rainmeter. Click Finish, and by default Rainmeter will open with your new theme. When the new theme opens the first time, you will be asked to read the readme, or simply go to the gallery. When you open the gallery, you can choose from a wide variety of tiles and gadgets to place on your desktop. You can also choose a different color scheme for your tiles. Once you’re done, click the X in the top right hand corner to close the Gallery. Welcome to your Windows Phone 7 desktop! Many of the gadgets are dynamic, and you can change the settings for most of them. The only thing missing is the transition animations that Windows Phone 7 shows when you launch an application. To make it look even more like Windows Phone 7, you can change your background to black. This makes the desktop theme really dramatic. And, if you want to add gadgets or change the color scheme, simply click on the + logo on the top. Windows Phone 7 Desktop Wallpapers If you’d prefer to simply change your background, My Microsoft Life has several very nice Windows Phone 7 wallpapers available for free. Click the link below to download these and other Microsoft-centric wallpapers. If you can’t wait to get the new Windows phone 7, this is a great way to start experiencing the beauty of the phone UI on your desktop. Links Download Rainmeter Download the Omnimo UI Rainmeter theme Download Windows Phone 7 inspired wallpapers Similar Articles Productive Geek Tips Try out Windows Phone 7 on your PC todayTest All Features of Windows Phone 7 On Your PCHow-To Geek on Lifehacker: How to Make Windows Vista Less AnnoyingCreate a Shortcut or Hotkey to Mute the System Volume in WindowsMake Ubuntu Automatically Save Changes to Your Session TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Norwegian Life If Web Browsers Were Modes of Transportation Google Translate (for animals) Roadkill’s Scan Port scans for open ports Out of 100 Tweeters Out of band Security Update for Internet Explorer

Read the article

Updated Security Baseline (7u45) impacts Java 7u40 and before with High Security settings

- by costlow

The Java Security Baseline has been increased from 7u25 to 7u45. For versions of Java below 7u45, this means unsigned Java applets or Java applets that depend on Javascript LiveConnect calls will be blocked when using the High Security setting in the Java Control Panel. This issue only affects Applets and Web Start applications. It does not affect other types of Java applications. The Short Answer Users upgrading to Java 7 update 45 will automatically fix this and is strongly recommended. The More Detailed Answer There are two items involved as described on the deployment flowchart: The Security Baseline – a dynamically updated attribute that checks to see which Java version contains the most recent security patches. The Security Slider – the user-controlled setting of when to prompt/run/block applets. The Security Baseline Java clients periodically check in to understand what version contains the most recent security patches. Versions are released in-between that contain bug fixes. For example: 7u25 (July 2013) was the previous secure baseline. 7u40 contained bug fixes. Because this did not contain security patches, users were not required to upgrade and were welcome to remain on 7u25. When 7u45 was released (October, 2013), this critical patch update contained security patches and raised the secure baseline. Users are required to upgrade from earlier versions. For users that are not regularly connected to the internet, there is a built in Expiration Date. Because of the pre-established quarterly critical patch updates, we are able to determine an approximate date of the next version. A critical patch released in July will have its successor released, at latest, in July + 3 months: October. The Security Slider The security slider is located within the Java control panel and determines which Applets & Web Start applications will prompt, which will run, and which will be blocked. One of the questions used to determine prompt/run/block is, “At or Above the Security Baseline.” The Combination JavaScript calls made from LiveConnect do not reside within signed JAR files, so they are considered to be unsigned code. This is correct within networked systems even if the domain uses HTTPS because signed JAR files represent signed "data at rest" whereas TLS (often called SSL) literally stands for "Transport Level Security" and secures the communication channel, not the contents/code within the channel. The resulting flow of users who click "update later" is: Is the browser plug-in registered and allowed to run? Yes. Does a rule exist for this RIA? No rules apply. Does the RIA have a valid signature? Yes and not revoked. Which security prompt is needed? JRE is below the baseline. This is because 7u45 is the baseline and the user, clicked "upgrade later." Under the default High setting, Unsigned code is set to "Don’t Run" so users see: Additional Notes End Users can control their own security slider within the control panel. System Administrators can customize the security slider during automated installations. As a reminder, in the future, Java 7u51 (January 2014) will block unsigned and self-signed Applets & Web Start applications by default.

Read the article

ASP.NET Web API - Screencast series with downloadable sample code - Part 1

- by Jon Galloway

There's a lot of great ASP.NET Web API content on the ASP.NET website at http://asp.net/web-api. I mentioned my screencast series in original announcement post, but we've since added the sample code so I thought it was worth pointing the series out specifically. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. So - let's watch them together! Grab some popcorn and pay attention, because these are short. After each video, I'll talk about what I thought was important. I'm embedding the videos using HTML5 (MP4) with Silverlight fallback, but if something goes wrong or your browser / device / whatever doesn't support them, I'll include the link to where the videos are more professionally hosted on the ASP.NET site. Note also if you're following along with the samples that, since Part 1 just looks at the File / New Project step, the screencast part numbers are one ahead of the sample part numbers - so screencast 4 matches with sample code demo 3. Note: I started this as one long post for all 6 parts, but as it grew over 2000 words I figured it'd be better to break it up. Part 1: Your First Web API [Video and code on the ASP.NET site] This screencast starts with an overview of why you'd want to use ASP.NET Web API: Reach more clients (thinking beyond the browser to mobile clients, other applications, etc.) Scale (who doesn't love the cloud?!) Embrace HTTP (a focus on HTTP both on client and server really simplifies and focuses service interactions) Next, I start a new ASP.NET Web API application and show some of the basics of the ApiController. We don't write any new code in this first step, just look at the example controller that's created by File / New Project. using System; using System.Collections.Generic; using System.Linq; using System.Net.Http; using System.Web.Http; namespace NewProject_Mvc4BetaWebApi.Controllers { public class ValuesController : ApiController { // GET /api/values public IEnumerable<string> Get() { return new string[] { "value1", "value2" }; } // GET /api/values/5 public string Get(int id) { return "value"; } // POST /api/values public void Post(string value) { } // PUT /api/values/5 public void Put(int id, string value) { } // DELETE /api/values/5 public void Delete(int id) { } } } Finally, we walk through testing the output of this API controller using browser tools. There are several ways you can test API output, including Fiddler (as described by Scott Hanselman in this post) and built-in developer tools available in all modern browsers. For simplicity I used Internet Explorer 9 F12 developer tools, but you're of course welcome to use whatever you'd like. A few important things to note: This class derives from an ApiController base class, not the standard ASP.NET MVC Controller base class. They're similar in places where API's and HTML returning controller uses are similar, and different where API and HTML use differ. A good example of where those things are different is in the routing conventions. In an HTTP controller, there's no need for an "action" to be specified, since the HTTP verbs are the actions. We don't need to do anything to map verbs to actions; when a request comes in to /api/values/5 with the DELETE HTTP verb, it'll automatically be handled by the Delete method in an ApiController. The comments above the API methods show sample URL's and HTTP verbs, so we can test out the first two GET methods by browsing to the site in IE9, hitting F12 to bring up the tools, and entering /api/values in the URL: That sample action returns a list of values. To get just one value back, we'd browse to /values/5: That's it for Part 1. In Part 2 we'll look at getting data (beyond hardcoded strings) and start building out a sample application.

Read the article

Inequality joins, Asynchronous transformations and Lookups : SSIS

- by jamiet

It is pretty much accepted by SQL Server Integration Services (SSIS) developers that synchronous transformations are generally quicker than asynchronous transformations (for a description of synchronous and asynchronous transformations go read Asynchronous and synchronous data flow components). Notice I said “generally” and not “always”; there are circumstances where using asynchronous transformations can be beneficial and in this blog post I’ll demonstrate such a scenario, one that is pretty common when building data warehouses. Imagine I have a [Customer] dimension table that manages information about all of my customers as a slowly-changing dimension. If that is a type 2 slowly changing dimension then you will likely have multiple rows per customer in that table. Furthermore you might also have datetime fields that indicate the effective time period of each member record. Here is such a table that contains data for four dimension members {Terry, Max, Henry, Horace}: Notice that we have multiple records per customer and that the [SCDStartDate] of a record is equivalent to the [SCDEndDate] of the record that preceded it (if there was one). (Note that I am on record as saying I am not a fan of this technique of storing an [SCDEndDate] but for the purposes of clarity I have included it here.) Anyway, the idea here is that we will have some incoming data containing [CustomerName] & [EffectiveDate] and we need to use those values to lookup [Customer].[CustomerId]. The logic will be: Lookup a [CustomerId] WHERE [CustomerName]=[CustomerName] AND [SCDStartDate] <= [EffectiveDate] AND [EffectiveDate] <= [SCDEndDate] The conventional approach to this would be to use a full cached lookup but that isn’t an option here because we are using inequality conditions. The obvious next step then is to use a non-cached lookup which enables us to change the SQL statement to use inequality operators: Let’s take a look at the dataflow: Notice these are all synchronous components. This approach works just fine however it does have the limitation that it has to issue a SQL statement against your lookup set for every row thus we can expect the execution time of our dataflow to increase linearly in line with the number of rows in our dataflow; that’s not good. OK, that’s the obvious method. Let’s now look at a different way of achieving this using an asynchronous Merge Join transform coupled with a Conditional Split. I’ve shown it post-execution so that I can include the row counts which help to illustrate what is going on here: Notice that there are more rows output from our Merge Join component than on the input. That is because we are joining on [CustomerName] and, as we know, we have multiple records per [CustomerName] in our lookup set. Notice also that there are two asynchronous components in here (the Sort and the Merge Join). I have embedded a video below that compares the execution times for each of these two methods. The video is just over 8minutes long. View on Vimeo For those that can’t be bothered watching the video I’ll tell you the results here. The dataflow that used the Lookup transform took 36 seconds whereas the dataflow that used the Merge Join took less than two seconds. An illustration in case it is needed: Pretty conclusive proof that in some scenarios it may be quicker to use an asynchronous component than a synchronous one. Your mileage may of course vary. The scenario outlined here is analogous to performance tuning procedural SQL that uses cursors. It is common to eliminate cursors by converting them to set-based operations and that is effectively what we have done here. Our non-cached lookup is performing a discrete operation for every single row of data, exactly like a cursor does. By eliminating this cursor-in-disguise we have dramatically sped up our dataflow. I hope all of that proves useful. You can download the package that I demonstrated in the video from my SkyDrive at http://cid-550f681dad532637.skydrive.live.com/self.aspx/Public/BlogShare/20100514/20100514%20Lookups%20and%20Merge%20Joins.zip Comments are welcome as always. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

PetaPoco with parameterised stored procedure and Asp.Net MVC

- by Jalpesh P. Vadgama

I have been playing with Micro ORMs as this is very interesting things that are happening in developer communities and I already liked the concept of it. It’s tiny easy to use and can do performance tweaks. PetaPoco is also one of them I have written few blog post about this. In this blog post I have explained How we can use the PetaPoco with stored procedure which are having parameters. I am going to use same Customer table which I have used in my previous posts. For those who have not read my previous post following is the link for that. Get started with ASP.NET MVC and PetaPoco PetaPoco with stored procedures Now our customer table is ready. So let’s Create a simple process which will fetch a single customer via CustomerId. Following is a code for that. CREATE PROCEDURE mysp_GetCustomer @CustomerId as INT AS SELECT * FROM [dbo].Customer where CustomerId=@CustomerId Now we are ready with our stored procedures. Now lets create code in CustomerDB class to retrieve single customer like following. using System.Collections.Generic; namespace CodeSimplified.Models { public class CustomerDB { public IEnumerable<Customer> GetCustomers() { var databaseContext = new PetaPoco.Database("MyConnectionString"); databaseContext.EnableAutoSelect = false; return databaseContext.Query<Customer>("exec mysp_GetCustomers"); } public Customer GetCustomer(int customerId) { var databaseContext = new PetaPoco.Database("MyConnectionString"); databaseContext.EnableAutoSelect = false; var customer= databaseContext.SingleOrDefault<Customer>("exec mysp_GetCustomer @customerId",new {customerId}); return customer; } } } Here in above code you can see that I have created a new method call GetCustomer which is having customerId as parameter and then I have written to code to use stored procedure which we have created to fetch customer Information. Here I have set EnableAutoSelect=false because I don’t want to create Select statement automatically I want to use my stored procedure for that. Now Our Customer DB class is ready and now lets create a ActionResult Detail in our controller like following using System.Web.Mvc; namespace CodeSimplified.Controllers { public class HomeController : Controller { public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; return View(); } public ActionResult About() { return View(); } public ActionResult Customer() { var customerDb = new Models.CustomerDB(); return View(customerDb.GetCustomers()); } public ActionResult Details(int id) { var customerDb = new Models.CustomerDB(); return View(customerDb.GetCustomer(id)); } } } Now Let’s create view based on that ActionResult Details method like following. Now everything is ready let’s test it in browser. So lets first goto customer list like following. Now I am clicking on details for first customer and Let’s see how we can use the stored procedure with parameter to fetch the customer details and below is the output. So that’s it. It’s very easy. Hope you liked it. Stay tuned for more..Happy Programming

Read the article

“Query cost (relative to the batch)” <> Query cost relative to batch

- by Dave Ballantyne

OK, so that is quite a contradictory title, but unfortunately it is true that a common misconception is that the query with the highest percentage relative to batch is the worst performing. Simply put, it is a lie, or more accurately we dont understand what these figures mean. Consider the two below simple queries: SELECT * FROM Person.BusinessEntity JOIN Person.BusinessEntityAddress ON Person.BusinessEntity.BusinessEntityID = Person.BusinessEntityAddress.BusinessEntityID go SELECT * FROM Sales.SalesOrderDetail JOIN Sales.SalesOrderHeader ON Sales.SalesOrderDetail.SalesOrderID = Sales.SalesOrderHeader.SalesOrderID After executing these and looking at the plans, I see this : So, a 13% / 87% split , but 13% / 87% of WHAT ? CPU ? Duration ? Reads ? Writes ? or some magical weighted algorithm ? In a Profiler trace of the two we can find the metrics we are interested in. CPU and duration are well out but what about reads (210 and 1935)? To save you doing the maths, though you are more than welcome to, that’s a 90.2% / 9.8% split. Close, but no cigar. Lets try a different tact. Looking at the execution plan the “Estimated Subtree cost” of query 1 is 0.29449 and query 2 its 1.96596. Again to save you the maths that works out to 13.03% and 86.97%, round those and thats the figures we are after. But, what is the worrying word there ? “Estimated”. So these are not “actual” execution costs, but what’s the problem in comparing the estimated costs to derive a meaning of “Most Costly”. Well, in the case of simple queries such as the above , probably not a lot. In more complicated queries , a fair bit. By modifying the second query to also show the total number of lines on each order SELECT *,COUNT(*) OVER (PARTITION BY Sales.SalesOrderDetail.SalesOrderID) FROM Sales.SalesOrderDetail JOIN Sales.SalesOrderHeader ON Sales.SalesOrderDetail.SalesOrderID = Sales.SalesOrderHeader.SalesOrderID The split in percentages is now 6% / 94% and the profiler metrics are : Even more of a discrepancy. Estimates can be out with actuals for a whole host of reasons, scalar UDF’s are a particular bug bear of mine and in-fact the cost of a udf call is entirely hidden inside the execution plan. It always estimates to 0 (well, a very small number). Take for instance the following udf Create Function dbo.udfSumSalesForCustomer(@CustomerId integer) returns money as begin Declare @Sum money Select @Sum= SUM(SalesOrderHeader.TotalDue) from Sales.SalesOrderHeader where CustomerID = @CustomerId return @Sum end If we have two statements , one that fires the udf and another that doesn't: Select CustomerID from Sales.Customer order by CustomerID go Select CustomerID,dbo.udfSumSalesForCustomer(Customer.CustomerID) from Sales.Customer order by CustomerID The costs relative to batch is a 50/50 split, but the has to be an actual cost of firing the udf. Indeed profiler shows us : No where even remotely near 50/50!!!! Moving forward to window framing functionality in SQL Server 2012 the optimizer sees ROWS and RANGE ( see here for their functional differences) as the same ‘cost’ too SELECT SalesOrderDetailID,SalesOrderId, SUM(LineTotal) OVER(PARTITION BY salesorderid ORDER BY Salesorderdetailid RANGE unbounded preceding) from Sales.SalesOrderdetail go SELECT SalesOrderDetailID,SalesOrderId, SUM(LineTotal) OVER(PARTITION BY salesorderid ORDER BY Salesorderdetailid Rows unbounded preceding) from Sales.SalesOrderdetail By now it wont be a great display to show you the Profiler trace reads a *tiny* bit different. So moral of the story, Percentage relative to batch can give a rough ‘finger in the air’ measurement, but dont rely on it as fact.

Read the article

Data Quality and Master Data Management Resources

- by Dejan Sarka

Many companies or organizations do regular data cleansing. When you cleanse the data, the data quality goes up to some higher level. The data quality level is determined by the amount of work invested in the cleansing. As time passes, the data quality deteriorates, and you need to repeat the cleansing process. If you spend an equal amount of effort as you did with the previous cleansing, you can expect the same level of data quality as you had after the previous cleansing. And then the data quality deteriorates over time again, and the cleansing process starts over and over again. The idea of Data Quality Services is to mitigate the cleansing process. While the amount of time you need to spend on cleansing decreases, you will achieve higher and higher levels of data quality. While cleansing, you learn what types of errors to expect, discover error patterns, find domains of correct values, etc. You don’t throw away this knowledge. You store it and use it to find and correct the same issues automatically during your next cleansing process. The following figure shows this graphically. The idea of master data management, which you can perform with Master Data Services (MDS), is to prevent data quality from deteriorating. Once you reach a particular quality level, the MDS application—together with the defined policies, people, and master data management processes—allow you to maintain this level permanently. This idea is shown in the following picture. OK, now you know what DQS and MDS are about. You can imagine the importance on maintaining the data quality. Here are some resources that help you preparing and executing the data quality (DQ) and master data management (MDM) activities. Books Dejan Sarka and Davide Mauri: Data Quality and Master Data Management with Microsoft SQL Server 2008 R2 – a general introduction to MDM, MDS, and data profiling. Matching explained in depth. Dejan Sarka, Matija Lah and Grega Jerkic: MCTS Self-Paced Training Kit (Exam 70-463): Building Data Warehouses with Microsoft SQL Server 2012 – I wrote quite a few chapters about DQ and MDM, and introduced also SQL Server 2012 DQS. Thomas Redman: Data Quality: The Field Guide – you should start with this book. Thomas Redman is the father of DQ and MDM. Tyler Graham: Microsoft SQL Server 2012 Master Data Services – MDS in depth from a product team mate. Arkady Maydanchik: Data Quality Assessment – data profiling in depth. Tamraparni Dasu, Theodore Johnson: Exploratory Data Mining and Data Cleaning – advanced data profiling with data mining. Forthcoming presentations I am presenting a DQS and MDM seminar at PASS SQL Rally Amsterdam 2013: Wednesday, November 6th, 2013: Enterprise Information Management with SQL Server 2012 – a good kick start to your first DQ and / or MDM project. Courses Data Quality and Master Data Management with SQL Server 2012 – I wrote a 2-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. Start improving the quality of your data now!

Read the article

Tool to convert blogger.com content to dasBlog

- by Daniel Moth

Due to blogger.com dropping FTP support, I've had to move my blog. If you are in a similar situation, this post will help you by showing you the necessary steps to take. Goals No loss on blog posts, comments AND all existing permalinks continue to work (redirect to the correct place). Steps Download the XML files corresponding to your blogger.com content and store them in a folder. Install and configure dasBlog on your local machine. Configure your web.config file (will need updating once you run step 4). Use the tool I describe further down to generate the content and place it at the right place. Test your site locally. Once you are happy, repeat step 2 on your hosting provider of choice. Remember to copy up your dasBlog theme folder if you created one. Copy up the local web.config file and the XML dasBlog content files generated by the tool of step 4. Test your site on the server. Once you are happy, go live (following instructions from your hoster). In my case, I gave the nameservers from my new hoster to my existing domain registrar and they made the switch. Tool (code) At step 4 above I referred to a tool. That is an overstatement, it is simply one 450-line C#code file that you can download here: BloggerToDasBlog.cs. I used this from a .NET 2.0 console app (and I run it under the Visual Studio debugger, i.e. F5) like this: Program.cs. The console app referenced the dasBlog 2.3 ASP.NET Blogging Engine i.e. the newtelligence.DasBlog.Runtime.dll assembly. Let me describe what the code does: Input: A path to a folder where the XML files from the old blogger.com blog reside. It can deal with both types of XML file. A full file path to a file where it creates XML redirect input (as required by the rewriteMap mentioned here). The blog URL. The author's email. The blog author name. A path to an empty folder where the new XML dasBlog content files will get created. The subfolder name used after the domain name in the URL. The 3 reg ex patterns to use. You can use the same as mine, but will need to tweak the monthly_archive rule. Again, to see what values I passed for all the above, see my Program.cs file. Output: It creates dasBlog XML files in the folder specified. It creates those by parsing the old blogger.com XML files that reside in the folder specified. After that is generated, copy it to the "Content" folder under your dasBlog installation. It creates an XML file with a single ignorable root element and a bunch of inner XML elements. You can copy paste these in the web.config file as discussed in this post. Other notes: For each blog post, it detects outgoing links to itself (i.e. to the same blog), and rewrites those to point to the new URLs. So internal links do not rely on the web.config redirects. It deals with duplicate post titles; it does not deal with triplicates and higher. Removes all references to blogger.com (e.g. references to [email protected], the injected hidden footer for statistics that each blog post has and others – see the code). It creates a lot of diagnostic output (in the Output window) and indeed the documentation for the code is in the Debug.WriteLine statements ;) This is not code I will maintain or support – it was a throwaway one-use project that I am sharing here as a starting point for anyone finding themselves in the same boat that I was. Enjoy "as is". Comments about this post welcome at the original blog.

Read the article

FluentPath: a fluent wrapper around System.IO

- by Bertrand Le Roy

.NET is now more than eight years old, and some of its APIs got old with more grace than others. System.IO in particular has always been a little awkward. It’s mostly static method calls (Path.*, Directory.*, etc.) and some stateful classes (DirectoryInfo, FileInfo). In these APIs, paths are plain strings. Since .NET v1, lots of good things happened to C#: lambda expressions, extension methods, optional parameters to name just a few. Outside of .NET, other interesting things happened as well. For example, you might have heard about this JavaScript library that had some success introducing a fluent API to handle the hierarchical structure of the HTML DOM. You know? jQuery. Knowing all that, every time I need to use the stuff in System.IO, I cringe. So I thought I’d just build a more modern wrapper around it. I used a fluent API based on an essentially immutable Path type and an enumeration of such path objects. To achieve the fluent style, a healthy dose of lambda expressions is being used to act on the objects. Without further ado, here’s an example of what you can do with the new API. In that example, I’m using a Media Center extension that wants all video files to be in their own folder. For that, I need a small tool that creates directories for each video file and moves the files in there. Here’s the code for it: Path.Get(args[0]) .Select(p => p.Extension == ".avi" || p.Extension == ".m4v" || p.Extension == ".wmv" || p.Extension == ".mp4" || p.Extension == ".dvr-ms" || p.Extension == ".mpg" || p.Extension == ".mkv") .CreateDirectory(p => p.Parent .Combine(p.FileNameWithoutExtension)) .Previous() .Move(p => p.Parent .Combine(p.FileNameWithoutExtension) .Combine(p.FileName)); This code creates a Path object pointing at the path pointed to by the first command line argument of my executable. It then selects all video files. After that, it creates directories that have the same names as each of the files, but without their extension. The result of that operation is the set of created directories. We can now get back to the previous set using the Previous method, and finally we can move each of the files in the set to the corresponding freshly created directory, whose name is the combination of the parent directory and the filename without extension. The new fluent path library covers a fair part of what’s in System.IO in a single, convenient API. Check it out, I hope you’ll enjoy it. Suggestions are more than welcome. For example, should I make this its own project on CodePlex or is this informal style just OK? Anything missing that you’d like to see? Is there a specific example you’d like to see expressed with the new API? Bugs? The code can be downloaded from here (this is under a new BSD license): http://weblogs.asp.net/blogs/bleroy/Samples/FluentPath.zip

Read the article

Outlook 2010 – My Top 9 features

- by Daniel Moth

Office 2010 has reached RTM. Here are my favorite Outlook features. Speed. It is faster than previous versions and hangs much less… Ignore Conversation (Ctrl+Del). Not interested in a conversation? Click this button on the new ribbon and you'll never receive another message on that thread (they all go to your Deleted folder). Calendar Preview. When receiving a Meeting Request, before deciding to accept or not you get to see a preview of your calendar for that day and where the new meeting would fit in. See full description on outlook team blog post. Quick Steps. See full description on outlook team blog post. I have created my own quick steps for filing conversations to folders, various pre-populated reply templates, creating calendar invites and creating TODOs from received emails. Search Interface. Many of us knew the magic keywords for making smart searches (e.g. from:Name), but it is great to learn many more through the search tools contextual ribbon tab. Next 7 days. Out of the many enhancements to the Calendar view, my favorite is to be able with single click to view the next 7 days – that is now my default view. MailTips. See full description on outlook team blog post. The ones I particularly like are when composing a mail to someone that has their Out Of Office reply set, you get to read it before sending the mail (and hence can decide to postpone sending). when composing a mail to a distribution list, a message informs you of the number of recipients. Hopefully, senders will use that as a clue for narrowing down the recipient list or at least verifying that their mail should indeed be sent to so many people. "You are not responding to the latest message in this conversation. Click here to open it.". When composing a reply to a conversation and you have not picked the last message to reply to (don't you hate it when people split threads like that?), this is the inline message you see (under the MailTips area) and if you click on the message it opens the last mail in the conversation so you can reply to that. Rich "Conversation Settings" and in particular "Show Messages from Other Folders". For example, you can see in your inbox not only the message you received but also the reply you sent (it gets pulled in from the Sent folder). Another example: a conversation has been taking place on a distribution list (so your rules filed it to a folder) and they add you on the TO or CC line, so it appears in a different folder; regardless of which folder you open, you are able to see the entire conversation. Note that messages from other folders than the one you are browsing, appear in grey text so you can easily spot them. Reading them in one folder, obviously marks them as read in the other folder… If you haven't yet, when are you making the move to Outlook 2010? Comments about this post welcome at the original blog.

Read the article

Systems Solutions at COLLABORATE12

- by ferhat

Want to connect with fellow Oracle users and learn more about how to maximize your Oracle software environments with Oracle Systems? Pack your bags for Las Vegas! COLLABORATE 12 is right around the corner! COLLABORATE 12 Conference will be held at the Mandalay Bay in Las Vegas, NV 22-26 April, 2012. This is an event designed and delivered by users just like you with sessions, interactive panel discussions and hands-on learning opportunities packed with first-hand experiences, case studies and practical “how-to” content.. This year’s event includes a number of educational sessions and demos for users interested in learning from the experts how to use Oracle Optimized Solutions to get the most out of their Oracle Technology and Application software. Oracle Optimized Solutions are proven blueprints that eliminate integration guesswork by combing best in class hardware and software components to deliver complete system architectures that are fully tested, and include documented best practices that reduce integration risks and deliver better application performance. And because they are highly flexible by design, Oracle Optimized Solutions can be implemented as an end-to-end solution or easily adapted into existing environments. Follow Oracle Infrared at Twitter, Facebook, Google+, and LinkedIn to catch the latest news, developments, announcements, and inside views from Oracle Optimized Solutions. Please come by our Exhibition Booth #1273 to see the demos and meet 1-1 with the experts behind a number of Oracle Optimized Solutions including those for JD Edwards EnterpriseOne, E-Business Suite, PeopleSoft HCM, Oracle WebCenter, and Oracle Database. Exhibitor Showcase Booth #1273 DAY TIME TITLE Monday April 23 6:00 pm - 8:00 pm Welcome Reception in the Exhibitor Showcase Tuesday April 24 10:15 am - 4:00 pm Exhibitor Showcase Open 1:00 pm - 2:00 pm Dedicated Exhibitor Showcase Time 5:30 pm - 7:00 pm Exhibitor Showcase Happy Hour Wednesday April 25 10:30 am - 3:00 pm Exhibitor Showcase Open 2:15 pm -3:00 pm Afternoon Break in Exhibitor Showcase There are also a number of deep dive, educational sessions covering deployment best practices using Oracle’s engineered systems and best-in-class hardware, operating system and virtualization technologies. Education Sessions DAY TIME TITLE LOCATION Monday April 23 9:45 am - 10:45 am Architecting and Implementing Backup and Recovery Solutions Surf E Tuesday April 24 2:00 pm – 3:00 pm Oracle's High Performance Systems for JD Edwards EnterpriseOne Mandalay Bay GH 4:30 pm - 5:30 pm Virtualization Boot Camp: What's New with Oracle VM Server for x86 Mandalay Bay C 9:30 am - 10:30 am Oracle on Oracle VM - Expert Panel Mandalay Bay L Wednesday April 25 9:30 am - 10:30 am Cloud Computing Directions: Part II Understanding Oracle's Cloud Directions South Seas E And don’t forget the keynotes and software roadmap sessions! Keynotes and Roadmap Sessions DAY TIME TITLE LOCATION Sunday April 22 3:20 pm – 4:20 pm Oracle’s Cloud Computing Strategy Breakers B Monday April 23 11:00 am – 12:00 pm JD Edwards - Vision, Promises and Execution: IT'S THE WAY WE ROLL and Why it Matters! Mandalay Bay A 11:00 am – 12:00 pm PeopleSoft Executive Update and Roadmap Mandalay Bay J 1:15 pm - 2:15 pm Oracle Database - Engineered for Innovation Mandalay Bay L 2:30 pm - 3:30 pm Oracle E-Business Suite Applications Strategy and General Manager Update Mandalay Bay D Tuesday April 24 9:15 am - 10:15 am IT at Oracle: The Art of IT Transformation to Enable Business Growth Mandalay Bay Ballroom H

Read the article

asynchrony is viral

- by Daniel Moth

It is becoming hard to write code today without introducing some form of asynchrony and, if you are using .NET (e.g. for Windows Phone 8 or Windows Store apps), that means sooner or later you have to await something and mark your method as async. My most recent examples included introducing speech recognition in my Translator By Moth phone app where I had to await mySpeechRecognizerUI.RecognizeWithUIAsync() and when moving that code base to a Windows Store project just to show a MessageBox I had to await myMessageDialog.ShowAsync(). Any time you need to invoke an asynchronous method in your code, you have a choice to make: kick off the operation but don’t wait for it to complete (otherwise known as fire-and-forget), synchronously wait for it to complete (which will entail blocking, which can be bad, especially on a UI thread), or asynchronously wait for it to complete before continuing on with the rest of the method’s work. In most cases, you want the latter, and the await keyword makes that trivial to implement. When you use the magical await keyword in front of an API call, then you typically have to make additional changes to your code: This await usage is within a method of course, and now you have to annotate that method with async. Furthermore, you have to change the return type of the method you just annotated so it returns a Task (if it previously returned void), or Task<myOldReturnType> (if it previously returned myOldReturnType). Note that if it returns void, in some cases you could cheat and stop there. Furthermore, any method that called this method you just annotated with async will now also be invoking an asynchronous operation, so you have to make that change in the body of the caller method to introduce the await keyword before the call to the method. …you guessed it, you now have to change this caller method to be annotated with async and have its return types tweaked... …and it goes on virally… At some point you reach the root of your user code, e.g. a GUI event handler, and whoever calls that void method can already deal with the fact that you marked it as async and the viral introduction of the keywords stops there… This is all wonderful progress and a very powerful mechanism, and I just wish someone had written a refactoring tool to take care of this… anyone? I mentioned earlier that you have a choice when invoking an asynchronous operation. If the first time you encounter this you wish to localize the impact of all these changes and essentially try to turn the asynchronous behavior into synchronous by blocking - don't! For reasons why you don't want to do that, read Toub's excellent blog post (and check out the rest of his blog with gems on async programming starting with the Async FAQ). Just embrace the pattern knowing that when you use one instance of an await, you'll propagate the change all the way to the root user code method, e.g. typically an event handler. Related aside: I just finished re-writing my MessageBox wrapper class for Phone projects, including making it work in Windows Store projects, and it does expect you to use it with an await :-). I'll share that in an upcoming post for those of you that have the same need… Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Beginner Geek: Scan a Document or Picture in Windows 7

- by Mysticgeek

There may come a time when you want to digitize your priceless old pictures, or need to scan a receipts and documents for your company. Today we look at how to scan a picture or document in Windows 7. Scanning Your Document In this example we’re using an HP PSC 1500 All-In-One printer connected to a Windows 7 Home Premium 32-bit system. Different scanners will vary, however the process is essentially the same. The scanning process has changed a bit since the XP days. To scan a document in Windows 7, place the document or picture in the scanner, click on Start, and go to Devices and Printers. When the Devices and Printers window opens, find your scanning device and double-click on it to get the manufacturers Printer Actions menu. For our HP PSC 1500 we have a few different options like printing, device setup, and scanner actions. Here we’ll click on the Scan a document or photo hyperlink. The New Scan window opens and from here you can adjust the quality of the scanned image and choose the output file type. Then click the Preview button to get an idea of what the image will look like. If you’re not happy with the preview, then you can go back and make any adjustments to the quality of the document or photo. Once everything looks good, click on the Scan button. The scanning process will start. The amount of time it takes will depend on your scanner type, and the quality of the settings you choose. The higher the quality…the more time it will take. You will have the option to tag the picture if you want to… Now you can view your scanned document or photo inside Windows Photo Viewer. If you’re happy with the look of the document, you can send it off in an email, put it on an network drive, FTP it… whatever you need to do with it. Another method is to place the document of photo you wish to scan in the scanner, open up Devices and Printers, then right-click on the scanning device and select Start Scan from the context menu. This should bypass the manufacturer screen and go directly into the New Scan window, where you can start the scan process. From the Context Menu you can also choose Scan Properties. This will allow you to test the scanner if you’re having problems with it and change some of its settings. Or you can choose Scan Profiles which allows you to use pre-selected settings, create your own, or set one as the default. Although scanning documents and photos isn’t a common occurrence as it was a few years ago, Windows 7 still includes the feature. When you need to scan a document or photo in Windows 7, this should get you started. Similar Articles Productive Geek Tips Easily Rotate Pictures In Word 2007Beginner Geek: Delete User Accounts in Windows 7Customize Your Welcome Picture Choices in Windows VistaSecure Computing: Detect and Eliminate Malware Using Windows DefenderMark Your Document As Final in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

Read the article

List of all states from COMPOSITE_INSTANCE, CUBE_INSTANCE, DLV_MESSAGE tables

- by Deepak Arora

In many of my engagements I get asked repeatedly about the states of the composites in 11g and how to decipher them, especially when we are troubleshooting issues around purging. I have compiled a list of all the states from the COMPOSITE_INSTANCE, CUBE_INSTANCE, DLV_MESSAGE and MEDIATOR_INSTANCE tables. These are the primary tables that are used when using BPEL composites and how they are used with the ECID. Composite State Values COMPOSITE_INSTANCE States State Description 0 Running 1 Completed 2 Running with faults 3 Completed with faults 4 Running with recovery required 5 Completed with recovery required 6 Running with faults and recovery required 7 Completed with faults and recovery required 8 Running with suspended 9 Completed with suspended 10 Running with faults and suspended 11 Completed with faults and suspended 12 Running with recovery required and suspended 13 Completed with recovery required and suspended 14 Running with faults, recovery required, and suspended 15 Completed with faults, recovery required, and suspended 16 Running with terminated 17 Completed with terminated 18 Running with faults and terminated 19 Completed with faults and terminated 20 Running with recovery required and terminated 21 Completed with recovery required and terminated 22 Running with faults, recovery required, and terminated 23 Completed with faults, recovery required, and terminated 24 Running with suspended and terminated 25 Completed with suspended and terminated 26 Running with faulted, suspended, and terminated 27 Completed with faulted, suspended, and terminated 28 Running with recovery required, suspended, and terminated 29 Completed with recovery required, suspended, and terminated 30 Running with faulted, recovery required, suspended, and terminated 31 Completed with faulted, recovery required, suspended, and terminated 32 Unknown 64 - Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Any value in the range of 32 to 63 indicates that the composite instance state has not been enabled, but the instance state is updated for faults, aborts, etc. CUBE_INSTANCE States State Description 0 STATE_INITIATED 1 STATE_OPEN_RUNNING 2 STATE_OPEN_SUSPENDED 3 STATE_OPEN_FAULTED 4 STATE_CLOSED_PENDING_CANCEL 5 STATE_CLOSED_COMPLETED 6 STATE_CLOSED_FAULTED 7 STATE_CLOSED_CANCELLED 8 STATE_CLOSED_ABORTED 9 STATE_CLOSED_STALE 10 STATE_CLOSED_ROLLED_BACK DLV_MESSAGE States State Description 0 STATE_UNRESOLVED 1 STATE_RESOLVED 2 STATE_HANDLED 3 STATE_CANCELLED 4 STATE_MAX_RECOVERED Since now in 11g the Invoke_Messages table is not there so to distinguish between a new message (Invoke) and callback (DLV) and there is DLV_TYPE column that defines the type of message: DLV_TYPE States State Description 1 Invoke Message 2 DLV Message MEDIATOR_INSTANCE STATE Description 0 No faults but there still might be running instances 1 At least one case is aborted by user 2 At least one case is faulted (non-recoverable) 3 At least one case is faulted and one case is aborted 4 At least one case is in recovery required state 5 At least one case is in recovery required state and at least one is aborted 6 At least one case is in recovery required state and at least one is faulted 7 At least one case is in recovery required state, one faulted and one aborted >=8 and < 16 Running >= 16 Stale In my next blog posting I will walk through the lifecycle of a BPEL process using the above states for the following use cases: - New BPEL process - initial Receive activity - Callback BPEL process - mid-level Receive activity As always comments and questions welcome! Deepak

Read the article

Open Your Windows - 4/Maio/10

- by Claudia Costa

This FREE technical briefing is designed to show ISVs/SIs how to leverage the Oracle11g Technology especially in the small to medium business. The briefing focuses on Oracle's 11g platform on Windows & Linux and gives a very comprehensive technical competitive overview to the products offered by Microsoft. The technical part covers Integration and Migration aspects of various Microsoft products such as SQL Server, .NET and Active Directory. Register Today! With Oracle11g Oracle introduced various products (ApplicationExpress, OracleExpress Edition, ADF, BPEL) and licenses (Oracle Database Standard Edition One, Application Server Java Edition) specifically targetting the small to medium business market and to show that Oracle Database and Application Server are as easy to use and costs less than Microsoft products in terms of purchase price and ongoing support & maintenance and even much much less when considering the Linux platform.. For those ISVs have already adopted Microsoft .NET framework and using SQL Server as their database layer, we will demostrate that Oracle11g Database is as easy as SQL Server to install, configure, and manage. In addition to that, their application development .NET platform does not requires dramatic changes to enable it to run on the Oracle database. Besides the standard functionalities, Oracle has enhanced some of the advanced features; such as Intermedia, Security, Ref Cursor, etc., tightly integrated with .NET framework so that .NET developers can take full advantage of the Oracle technology, without worrying or programming the complexity components. Objectives · Understand Oracle's strategy and commitment on Windows & Linux · Learn how to migrate from SQL Server to Oracle on Windows AND Linux · Understand that Oracle11g is easy to manage and to install on Windows & Linux · Learn how to integrate Windows products with the Oracle11g Platform · Learn how Oracle products interoperate & integrate with Microsoft .NET · Learn how an Oracle database on Windows will easily be ported to a lower cost Linux database platform and interoperate with a .NET application Prerequisites General Operating System expertise including MS-Windows and Linux. Agenda · Welcome and Intro · Oracle at a glance · Strategy; Small to Medium Business, Microsoft and Linux · Oracle 11g Architecture on Linux & Windows · Managing Oracle 11g on Linux & Windows · Application Development · Migration · Value propositions for ISVs & Wrap-up ---------------------------------------------------------------------------- Para mais informações/inscrições, contacte: [email protected].

Read the article

Add Spell Checking to Your Favorite Windows Apps

- by Asian Angel

Some but not all Windows apps have built-in spell checking of some sort. If you want to add spell checking to all of your apps (or a select group) then join us as we look at tinySpell. Note: There is a paid version of this software (tinySpell+) available as well for those who want extra functionality. tinySpell in Action The installation process is simple and straightforward…as soon as you have finished installing tinySpell you will see your new “System Tray Icon”. You can see tinySpell’s “Context Menu” here. Before going any further you may want to have a look through the settings to make any desired display modifications. During our tests we found it very helpful to modify the Spelling Tip options…it will make for a much nicer and easier to read display when you have a spelling error. Clicking on the Applications… Command in the Context Menu will bring up the following window. You can really finesse how active tinySpell will be here: Create a special list of apps that tinySpell will not monitor Create a custom list of apps that tinySpell will monitor If you have any particular or unique words that you would like to add to tinySpell’s Dictionary ahead of time you can do that by clicking on the Dictionary… Command in the Context Menu. Want to check the spelling of a word ahead of time or find that you are just curious about how it is spelled? Click on Open spelling window in the Context Menu to access a special spell check window. For our example we misspelled “spelling” on purpose…notice that the word has turned red. Clicking on the Check Mark Button will open a drop-down list with suggested spellings for the word that you are inquiring about. Click on the appropriate listing if you intend to copy and paste the word. Next we moved on to Notepad. As we were typing tinySpell alerted us when we typed the word “app”. You will hear a small default system sound and see a small popup as shown here if tinySpell thinks a word has been misspelled. The System Tray Icon will also change to a yellow color. You can access the list of suggested spellings by either left clicking on the small popup or the System Tray Icon. If the word is a properly spelled “abbreviation” (or special/custom) like our word here you can select Add to dictionary. Going further in our text document we once again purposely misspelled “spelling”… Left clicking on the popup gave us access to the drop-down list of suggested spellings… And clicking on the correct spelling automatically inserted it into our document in place of the misspelled word. As you can see here tinySpell was even monitoring file names when we went to save the document. Very thorough indeed. Conclusion If your favorite app does not have built-in spell checking, then tinySpell will definitely be a welcome (and very helpful) addition to your Windows system. They offer a portable version as well so you can take it with you to any PC. Links Download tinySpell *Note: The download link is located approximately half-way down the page. Similar Articles Productive Geek Tips Quick Tip: Spell Check Firefox Text Input FieldsEdit the Windows Live Writer Custom DictionaryAccess Your Favorite Google Services in Chrome the Easy WayLaunch External Apps from FirefoxNinite Makes Installing Software Incredibly Simple TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app

Read the article

Travelling MVP #4: DevReach 2012

- by DigiMortal

Our next stop after Varna was Sofia where DevReach happens. DevReach is one of my favorite conferences in Europe because of sensible prices and strong speakers line-up. Also they have VIP-party after conference and this is good event to meet people you don’t see every day, have some discussion with speakers and find new friends. Our trip from Varna to Sofia took about 6.5 hours on bus. As I was tired from last evening it wasn’t problem for me as I slept half the trip. After smoking pause in Velike Tarnovo I watched movies from bus TV. We had supper later in city center Happy’s – place with good meat dishes and nice service. And next day it begun…. :) DevReach 2012 DevReach is held usually in Arena Mladost. It’s near airport and Telerik office. The event is organized by local MVP Martin Kulov together with Telerik. Two days of sessions with strong speakers is good reason enough for me to go to visit some event. Some topics covered by sessions: Windows 8 development web development SharePoint Windows Azure Windows Phone architecture Visual Studio Practically everybody can find some interesting session in every time slot. As the Arena is not huge it is very easy to go from one sessions to another if selected session for time slot is not what you expected. On the second floor of Arena there are many places where you can eat. There are simple chunk-food places like Burger King and also some restaurants. If you are hungry you will find something for your taste for sure. Also you can buy beer if it is too hot outside :) Weather was very good for October – practically Estonian summer – 25C and over. Sessions I visited Here is the list of sessions I visited at DevReach 2012: DevReach 2012 Opening & Welcome Messsage with Martin Kulov and Stephen Forte Principled N-Tier Solution Design with Steve Smith Data Patterns for the Cloud with Brian Randell .NET Garbage Collection Performance Tips with Sasha Goldshtein Building Secured, Scalable, Low-latency Web Applications with the Windows Azure Platform with Ido Flatow It’s a Knockout! MVVM Style Web Applications with Charles Nurse Web Application Architecture – Lessons Learned from Adobe Brackets with Brian Rinaldi Demystifying Visual Studio 2012 Performance Tools with Martin Kulov SPvNext – A Look At All the Exciting And New Features In SharePoint with Sahil Malik Portable Libraries – Why You Should Care with Lino Tadros I missed some sessions because of some death march projects that are going and that I have to coordinate but it was not big loss as I had time to walk around in session venue neighborhood and see Sofia Business Park. Next year again! I will be there again next year and hopefully more guys from Estonia will join me. I think it’s good idea to take short vacation for DevReach time and do things like we did this time – Bucharest, Varna, Sofia. It’s only good idea to plan some more free time so we are not very much in hurry and also we have no work stuff to do on the trip. This far this trip has been one of best trips I have organized and I will go and meet all those guys in this region again! :)

Read the article

Three Easy Ways of Providing Feedback to the Oracle AutoVue Team

- by Celine Beck

Customer feedback is essential in helping us deliver best-in-class Enterprise Visualization solutions which are centered around real-world usage. As the Oracle AutoVue Product Management team is busy prioritizing the next round of improvements, enhancements and new innovation to the AutoVue platform, I thought it would be a good idea to provide our blog-readers with a recap of how best to provide product feedback to the AutoVue Product Management team. This gives you the opportunity to help shape our future agenda and make our solutions better for you. Enterprise Visualization Special Interest Group (EV SIG): the AutoVue EV SIG is a customer-driven initiative that has recently been created to share knowledge and information between members and discuss common and best practices around Enterprise Visualization. The EV SIG also serves as a mechanism for establishing and communicating to AutoVue Product Management users’ collective priorities for the future development, direction and enhancement of the AutoVue product family with the objective of ensuring their continuous improvement. Essentially, EV SIG members meet in order to share and prioritize feedback and use this input to begin dialog with the AutoVue Product Management team on what they deem to be the most important improvements to Enterprise Visualization solutions. The AutoVue EV SIG is by far the best platform for sharing and relaying feedback to our Product Strategy / Management team regarding general product enhancements, industry-specific scenarios, new use cases, usability, support, deployability, etc, and helping us shape the future direction of Enterprise Visualization solutions. We strongly encourage ALL our customers to sign up for the SIG; here is how you can do so: Sign up for the EVSIG mailing list b. Visit the group’s website c. Contact Dennis Walker at Harris Corporation directly should you have any questions: dwalke22-AT-harris-DOT-com Customer / Partner Advisory Boards: The AutoVue Product Strategy / Management team also periodically runs Customer and Partner Advisory Boards. These invitation-only events bring together individuals chosen from Oracle AutoVue’s top customers that are using AutoVue at the enterprise level, as well as strategic partners. The idea here is to establish open lines of communication between top customers and partners and the Oracle AutoVue Product Strategy team, help us communicate AutoVue’s product direction, share perspectives on today and tomorrow’s challenges and needs for Enterprise Visualization, and validate that proposed additions to the product are valid industry solutions. Our next Customer / Partner Advisory Board will be held in San Francisco during Oracle Open World, please contact your account manager to find out more about the CAB Members’ nomination process. Enhancement Requests: Enhancement requests are request logged by customers or partners with Product Development for a feature that is not currently available in Oracle AutoVue. Enhancement requests (ER) can be logged easily via the My Oracle Support portal. This is the best way to share feedback with us at the functionality level; for instance if you would like to see a new format supported in AutoVue or make suggestions as per how certain functionality can be improved or should behave. Once the ER is logged, it is then evaluated by Product Management based on feasibility, product adequation and business justification. Product Management then decides whether to consider this ER for future release or not. What helps accelerate the process is hearing from a large number of customers who urgently need a particular feature or configuration. Hence the importance of logging Metalink Service Requests, and describing in details your business expectations. You can include key milestones dates and justifications as to why this request is important and the benefits your organization stands to gain should this request be accepted. Again, feedback from customers and partners is critical to ensure we offer solutions that have the biggest impact on customers’ business processes and day-to-day operations. All feedback is welcome,. So please don’t be shy!

Read the article

BizTalk Server Monitoring – SharePoint Web Part

- by SURESH GIRIRAJAN

I have been worked with customers using BizTalk as shared infrastructure in the enterprise, where we have two or more BizTalk apps running on it for different Business groups. Also these customers are not using BizTalk ESB portal even though they are using BizTalk ESB exception framework. So main issue with all these Business groups are they don’t have visibility into the BizTalk apps running in prod, even though they are using SCOM and other monitoring stuff in place. So I am trying to address few issues I am going to list below and how I try to mitigate them, first one on the list is how to get visibility into prod, how to provision those access to the BizTalk resources with minimal activity and how can we take advantage of the resources we have today. So I was working on creating REST data services for BizTalk RFID a year ago and available on codeplex. I thought to extend that idea to take advantage of BizTalk Data Services available in codeplex. I extended the BizTalk data services I will upload the updated service soon. So let me start thru how my solution works, so first step I am using the BizTalk data service (REST service) which expose most of the BizTalk artifacts as resources such as Applications, Orchestrations, Send ports, Receive ports, Host instances and In process instances etc. BizTalk Server Monitoring – SharePoint Web Part I am hosting the BizTalk data service in IIS with application pool configured to run under BizTalk administrator credentials. So with this setup I am making the service to make accessible anonymous. Next step of this solution I have created a SharePoint Visual web part which consumes the BizTalk data service and display all the BizTalk Application and Platform settings in read only mode. Even though BizTalk data services offers to browse resources as well perform actions like starting, stopping Orchestrations, Send ports, Receive locations, Host instances etc. Host Instances BizTalk Applications BizTalk Running / Suspended Instances So having this BizTalk Monitoring SharePoint web part, will be added to the SharePoint. This eliminates the need for granting access to the BizTalk users explicitly, so when you have BizTalk contractor or BizTalk application user need to have access to the BizTalk environment all the need is have access to the SharePoint website. You can configure the web part point to different end point based on your environment. I am making this as read only as part of this to make easier for the users and in terms of provisioning. This removes the dependency of BizTalk admin at least for viewing the BizTalk application status and errors etc. If we need to make any changes to the BizTalk application then its application owner responsibility to co-ordinate with BizTalk admins. There are options like BizTalk ESB portal, BizTalk 360 etc… but this one of the approach to reduce number of steps required to give access to BizTalk application users and also to maximize the resource we have in enterprise today. Also you can expose this data service thru Azure Service Bus and access from other apps like mobile devices or create a web site hosted in Azure etc. One last thing I have tested only with BizTalk Server 2010 on x64 VM only, but it should work on other version. I will try to upload the code shortly with instructions how to setup etc.… I welcome thoughts and suggestions… Hope this helps….

Read the article

AutoFit in PowerPoint: Turn it OFF

- by Daniel Moth

Once a feature has shipped, it is very hard to eliminate it from the next release. If I was in charge of the PowerPoint product, I would not hesitate for a second to remove the dreadful AutoFit feature. Fortunately, AutoFit can be turned off on a slide-by-slide basis and, even better, globally: go to the PowerPoint "Options" and under "Proofing" find the "AutoCorrect Options…" button which brings up the dialog where you need to uncheck the last two checkboxes (see the screenshot to the right). AutoFit is the ability for the user to keep hitting the Enter key as they type more and more text into a slide and it magically still fits, by shrinking the space between the lines and then the text font size. It is the root of all slide evil. It encourages people to think of a slide as a Word document (which may be your goal, if you are presenting to execs in Microsoft, but that is a different story). AutoFit is the reason you fall asleep in presentations. AutoFit causes too much text to appear on a slide which by extension causes the following: When the slide appears, the text is so small so it is not readable by everyone in the audience. They dismiss the presenter as someone who does not care for them and then they stop paying attention. If the text is readable, but it is too much (hence the AutoFit feature kicked in when the slide was authored), the audience is busy reading the slide and not paying attention to the presenter. Humans can either listen well or read well at the same time, so when they are done reading they now feel that they missed whatever the speaker was saying. So they "switch off" for the rest of the slide until the next slide kicks in, which is the natural point for them to pick up paying attention again. Every slide ends up with different sized text. The less visual consistency between slides, the more your presentation feels unprofessional. You can do better than dismiss the (subconscious) negative effect a deck with inconsistent slides has on an audience. In contrast, the absence of AutoFit Leads to consistency among all slides in a deck with regards to amount of text and size of said text. Ensures the text is readable by everyone in the audience (presuming the PowerPoint template is designed for the room where the presentation is delivered). Encourages the presenter to create slides with the minimum necessary text to help the audience understand the basic structure, flow, and key points of the presentation. The "meat" of the presentation is delivered verbally by the presenter themselves, which is why they are in the room in the first place. Following on from the previous point, the audience can at a quick glance consume the text on the slide when it appears and then concentrate entirely on the presenter and what they have to say. You could argue that everything above has nothing to do with the AutoFit feature and all to do with the advice to keep slide content short. You would be right, but the on-by-default AutoFit feature is the one that stops most people from seeing and embracing that truth. In other words, the slides are the tool that aids the presenter in delivering their message, instead of the presenter being the tool that advances the slides which hold the message. To get there, embrace terse slides: the first step is to turn off this horrible feature (that was probably introduced due to the misuse of this tool within Microsoft). The next steps are described on my next post. Comments about this post welcome at the original blog.

Read the article

Dynamically creating meta tags in asp.net mvc

- by Jalpesh P. Vadgama

As we all know that Meta tag has very important roles in Search engine optimization and if we want to have out site listed with good ranking on search engines then we have to put meta tags. Before some time I have blogged about dynamically creating meta tags in asp.net 2.0/3.5 sites, in this blog post I am going to explain how we can create a meta tag dynamically very easily. To have meta tag dynamically we have to create a meta tag on server-side. So I have created a method like following. public string HomeMetaTags() { System.Text.StringBuilder strMetaTag = new System.Text.StringBuilder(); strMetaTag.AppendFormat(@"<meta content='{0}' name='Keywords'/>","Home Action Keyword"); strMetaTag.AppendFormat(@"<meta content='{0}' name='Descption'/>", "Home Description Keyword"); return strMetaTag.ToString(); } Here you can see that I have written a method which will return a string with meta tags. Here you can write any logic you can fetch it from the database or you can even fetch it from xml based on key passed. For the demo purpose I have written that hardcoded. So it will create a meta tag string and will return it. Now I am going to store that meta tag in ViewBag just like we have a title tag. In this post I am going to use standard template so we have our title tag there in viewbag message. Same way I am going save meta tag like following in ViewBag. public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; ViewBag.MetaTag = HomeMetaTags(); return View(); } Here in the above code you can see that I have stored MetaTag ViewBag. Now as I am using standard ASP.NET MVC3 template so we have our we have out head element in Shared folder _layout.cshtml file. So to render meta tag I have modified the Head tag part of _layout.cshtml like following. <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-1.5.1.min.js")" type="text/javascript"></script> @Html.Raw(ViewBag.MetaTag) </head> Here in the above code you can see I have use @Html.Raw method to embed meta tag in _layout.cshtml page. This HTML.Raw method will embed output to head tag section without encoding html. As we have already taken care of html tag in string function we don’t need the html encoding. Now it’s time to run application in browser. Now once you run your application in browser and click on view source you will find meta tag for home page as following. That’s its It’s very easy to create dynamically meta tag. Hope you liked it.. Stay tuned for more.. Till then happy programming.

Read the article

SQLAuthority News – Ahmedabad Tech Ed On Road June 11, 2011 – An Event to Remember – A Grand Success of Community Tech Days

- by pinaldave

I am very excited to announce the huge success of the Microsoft Community TechDays at Ahmedabad, on 11 June 2011. The turn-out for this seminar was huge, and there was a great response from the audience. In fact, the AMA where the conference was held can seat 275 people – but there were over 50 people standing, the event coordinators had to find 150 more chairs, and we even had to turn away 30 people at the door because there was just no more room. This means that there were over 500 attendees! The event started right on time, at 10 am, with my introduction and welcome to the audience. My presentation on my favorite subject of “SQL Server Performance Troubleshooting Using Waits and Queues.” Because of the number of speakers, I had to cut my presentation short by 10 minutes, so I only had 50 minutes to explain how to use swaits and queues to fine tune performance. There was a good response to my talk from audience. I feel the best presentation, though, was “HTML5 – Future of the Web” by Harish Vaidyanathan. He explained how HTML5 is going to change the internet, and taught everyone a lot about how to best use Internet Explorer 9, and discussed CSS3, SVG and DOM specifications. Many people in the audience came specifically for this session – many had to take a half day leave off work just to travel there. At this point we all took a break for lunch, but there was no one taking a nap with a full stomach because we had a presentation of the new Windows Mango phone from Dhananjay Kumar. New technology like this always wakes everyone up! After this came “TSQL Worst Practices” by Jacob Sebastian. He too had to cut his talk short by 10 minutes in order to accommodate everyone, but his discussion of what SQL queries to avoid was still excellent. He is magnificent presenter and Ahmedabad loves him. The final presentation was “ASP.NET Tips and Tricks” by Tejas Shah. This was a good overview of asp.net fundamentals, and how to use them to improve application performance. However, the day was not over here! We kept the audience entertained with prizes and give-aways. Names were drawn for prizes and there was a quiz session with great gifts for the winners. Overall, the day was a huge success. There was a good mix of SQL and non-SQL subjects, and many audiences members commented on how much they learned. We had a much bigger turn-out than expected – all the chairs were filled 45 minutes before we even started! For our next conference we need to find a space that will hold everyone, especially since we are hoping to have 600-800 people attending. We definitely feel we can reach this goal. We are already looking forward to the next Ahmedabad Microsoft Community TechDays. Download presentations: HTML5 Beauty of Web -By Harish Vaidyanathan TSQL Worst Practices- By Jacob Sebastian SQL SERVER Performance troubleshooting using Waits and Queues -By Pinal Dave ASP.NET Tips and Tracks -By Tejas Shah Other reports: Tech-Ed on Road 2011- Ahmedabad–A great event- By Jalpesh Tech-Ed 2011 on the Road in Ahmedabad – by Ritesh Shah Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

Read the article

Oracle Text query parser

- by Roger Ford

Oracle Text provides a rich query syntax which enables powerful text searches.However, this syntax isn't intended for use by inexperienced end-users. If you provide a simple search box in your application, you probably want users to be able to type "Google-like" searches into the box, and have your application convert that into something that Oracle Text understands.For example if your user types "windows nt networking" then you probably want to convert this into something like"windows ACCUM nt ACCUM networking". But beware - "NT" is a reserved word, and needs to be escaped. So let's escape all words:"{windows} ACCUM {nt} ACCUM {networking}". That's fine - until you start introducing wild cards. Then you must escape only non-wildcarded searches:"win% ACCUM {nt} ACCUM {networking}". There are quite a few other "gotchas" that you might encounter along the way.Then there's the issue of scoring. Given a query for "oracle text query syntax", it would be nice if we could score a full phrase match higher than a hit where all four words are present but not in a phrase. And then perhaps lower than that would be a document where three of the four terms are present. Progressive relaxation helps you with this, but you need to code the "progression" yourself in most cases.To help with this, I've developed a query parser which will take queries in Google-like syntax, and convert them into Oracle Text queries. It's designed to be as flexible as possible, and will generate either simple queries or progressive relaxation queries. The input string will typically just be a string of words, such as "oracle text query syntax" but the grammar does allow for more complex expressions: word : score will be improved if word exists +word : word must exist -word : word CANNOT exist "phrase words" : words treated as phrase (may be preceded by + or -) field:(expression) : find expression (which allows +,- and phrase as above) within "field". So for example if I searched for +"oracle text" query +syntax -ctxcatThen the results would have to contain the phrase "oracle text" and the word syntax. Any documents mentioning ctxcat would be excluded from the results. All the instructions are in the top of the file (see "Downloads" at the bottom of this blog entry). Please download the file, read the instructions, then try it out by running "parser.pls" in either SQL*Plus or SQL Developer.I am also uploading a test file "test.sql". You can run this and/or modify it to run your own tests or run against your own text index. test.sql is designed to be run from SQL*Plus and may not produce useful output in SQL Developer (or it may, I haven't tried it).I'm putting the code up here for testing and comments. I don't consider it "production ready" at this point, but would welcome feedback. I'm particularly interested in comments such as "The instructions are unclear - I couldn't figure out how to do XXX" "It didn't work in my environment" (please provide as many details as possible) "We can't use it in our application" (why not?) "It needs to support XXX feature" "It produced an invalid query output when I fed in XXXX" Downloads: parser.pls test.sql

Read the article

concurrency::accelerator_view

- by Daniel Moth

Overview We saw previously that accelerator represents a target for our C++ AMP computation or memory allocation and that there is a notion of a default accelerator. We ended that post by introducing how one can obtain accelerator_view objects from an accelerator object through the accelerator class's default_view property and the create_view method. The accelerator_view objects can be thought of as handles to an accelerator. You can also construct an accelerator_view given another accelerator_view (through the copy constructor or the assignment operator overload). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator_view objects between them to determine if they refer to the same underlying accelerator. We'll see later that when we use concurrency::array objects, the allocation of data takes place on an accelerator at array construction time, so there is a constructor overload that accepts an accelerator_view object. We'll also see later that a new concurrency::parallel_for_each function overload can take an accelerator_view object, so it knows on what target to execute the computation (represented by a lambda that the parallel_for_each also accepts). Beyond normal usage, accelerator_view is a quality of service concept that offers isolation to multiple "consumers" of an accelerator. If in your code you are accessing the accelerator from multiple threads (or, in general, from different parts of your app), then you'll want to create separate accelerator_view objects for each thread. flush, wait, and queuing_mode When you create an accelerator_view via the create_view method of the accelerator, you pass in an option of immediate or deferred, which are the two members of the queuing_mode enum. At any point you can access this value from the queuing_mode property of the accelerator_view. When the queuing_mode value is immediate (which is the default), any commands sent to the device such as kernel invocations and data transfers (e.g. parallel_for_each and copy, as we'll see in future posts), will get submitted as soon as the runtime sees fit (that is the definition of immediate). When the value of queuing_mode is deferred, the commands will be batched up. To send all buffered commands to the device for execution, there is a non-blocking flush method that you can call. If you wish to block until all the commands have been sent, there is a wait method you can call. Deferring is a more advanced scenario aimed at performance gains when you are submitting many device commands and you want to avoid the tiny overhead of flushing/submitting each command separately. Querying information Just like accelerator, accelerator_view exposes the is_debug and version properties. In fact, you can always access the accelerator object from the accelerator property on the accelerator_view class to access the accelerator interface we looked at previously. Interop with D3D (aka DX) In a later post I'll show an example of an app that uses C++ AMP to compute data that is used in pixel shaders. In those scenarios, you can benefit by integrating C++ AMP into your graphics pipeline and one of the building blocks for that is being able to use the same device context from both the compute kernel and the other shaders. You can do that by going from accelerator_view to device context (and vice versa), through part of our interop API in amp.h: *get_device, create_accelerator_view. More on those in a later post. Comments about this post by Daniel Moth welcome at the original blog.

Search Results

Search found 4057 results on 163 pages for 'welcome'.

Page 108/163 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115 | Next Page >

- by Daniel Moth

- by Matthew Guay

- by costlow

- by Jon Galloway

- by jamiet

- by Jalpesh P. Vadgama

- by Dave Ballantyne

- by Dejan Sarka

- by Daniel Moth

- by Bertrand Le Roy

- by Daniel Moth

- by ferhat

- by Daniel Moth

- by Mysticgeek

- by Deepak Arora

- by Claudia Costa

- by Asian Angel

- by DigiMortal

- by Celine Beck

- by SURESH GIRIRAJAN

- by Daniel Moth

- by Jalpesh P. Vadgama

- by pinaldave

- by Roger Ford

- by Daniel Moth

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115 | Next Page >