Search Results

Search found 14187 results on 568 pages for 'dell mini 12'.

Page 109/568 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Clicking far away in vim in tmux in urxvt

  - by paps

  I use vim inside tmux inside urxvt, and the mouse works perfectly well for clicking and selecting text, except when I want to click too far to the right. It seems to be related to the distance in number of columns from the left. When I go beyond column ~200 (not sure about the exact number), clicking simply does nothing. Note that it's not related to a vim window: with two vim windows taking ~150 columns each, clicking will not work after the ~50th column in the second window. It's related to the whole vim session. Also note that clicking far away in a big tmux pane (200 columns) works perfectly. In my .tmux.conf I have this line: set -g default-terminal "screen-256color" and in my .vimrc I have this: if &term =~ "^screen" autocmd VimEnter * silent !echo -ne "\033Ptmux;\033\033]12;7\007\033\\" let &t_SI = "\<Esc>Ptmux;\<Esc>\<Esc>]12;5\x7\<Esc>\\" let &t_EI = "\<Esc>Ptmux;\<Esc>\<Esc>]12;7\x7\<Esc>\\" autocmd VimLeave * silent !echo -ne "\033Ptmux;\033\033]12;14\007\033\\" end It changes the cursor's color depending on the editing mode of vim, and it works, meaning that tmux really sets $TERM to "screen-256color" — but I don't know if this has any relevance with my mouse problem. I'm running Ubuntu 12.04, vim 7.3, tmux 1.6 and rxvt-unicode 9.14. Does anybody have an idea about what is causing this problem? Thanks.

  Read the article

• maximum size filesystem on my test .... approach?

  - by jocco

  Hello all I'm new at the site, and I have a question. I got this question at a test and really like to know the correct approach to solving this problem? Here is the question. In an indexed filesystem the first indexblock (inode) has 12 direct pointers and 1 pointer to an indirect indexblock. The filesystem is implemented on a disk with a diskblock-size of 1024 bytes. All pointers are 32 bit. Question: what is the maximum filesize (Kilobytes) of this filesystem? If it's possible not an just an answer but an explanation. edit: It was a multiple choice btw with 4 answers a. 13 K b. 268 K c. 524 K d. 1036 K As for my approach I only got as far as to know that 1 pointer is 32 bit Also I found something else here on the site which seems very usefull. http://stackoverflow.com/questions/2755006/understanding-the-concept-of-inodes Ok i got this far There are 12 blocks and each block is 1024 bytes. 1024 * 12 = 12288 bytes or 12 KB directly accessible. Please correct me if I'm wrong. Each pointer is 32 Bit = 4Byte And to be honest at this point I'm starting to get confused especially since my answer is way over any of my multiple choice answers.

  Read the article

• Timeperiod Setting

  - by Alvin G. Matunog

  I am running Nagios 3.2.3 on CentOS 5.7 32bit and I have a bit of a problem scheduling timeperiods. Please help me. Objective, to stop monitoring during server restart (since the server will be restarted and will be restarted automatically because of updates and system backup). The restart is scheduled every 1st Sunday of every month. My monitoring runs 24x7 but during restarts I want to stop the monitoring and resume after 30 mins. So every 1st Sunday I want my schedule to be 00:00-11:30,12:00-24:00. This means that it will stop at 11:30 and resumes on 12:00nn. If I set this on every Sunday there is no problem. But if I set this time on every 1st Sundays, it stops at 11:30 but resumes on the next day (Monday) and not on 12:00nn Sunday. I don't know what I am missing. If I set on regular weekdays there is no problem. But on Offset weekdays (1st Sunday) it doesn`t work the way it should have. Here is my definition; define timeperiod{ name 1st_sunday timeperiod_name 1st_sunday alias No monitoring every 1st Sunday thursday 1 00:00-11:30,12:00-24:00 } define timeperiod{ timeperiod_name irregular alias regular checking use 1st_sunday sunday 08:30-22:00 monday 08:30-22:00 tuesday 08:30-22:00 wednesday 08:30-22:00 thursday 08:30-19:10,19:20-22:00 friday 08:30-22:00 saturday 08:30-22:00 } Can anyone help me? Please? Thank you.

  Read the article

• I can't change mysql port (5.6.12) changing the lines of my.ini (windows 8)

  - by videador

  I was trying to change the port of my mysql server in my local machine but i can't. The version of mysql is 5.6.12, is an installation from wamp and I am on Windows 8. I change these lines in my my.ini file located in (C:\wamp\bin\mysql\mysql5.6.12). [client] #password = your_password port = 3307 socket = /tmp/mysql.sock [wampmysqld] port = 3307 socket = /tmp/mysql.sock key_buffer = 16M max_allowed_packet = 1M The previous values were 3306. Ok then I've reset the server installed, but it doesn't works, the mysql server is still running on 3306. Then, I rename the path of the services with this, to make sure that the my.ini is read by the mysql instance. c:\wamp\bin\mysql\mysql5.6.12\bin\mysqld.exe --defaults-file="C:\wamp\bin\mysql\mysql5.6.12\my.ini" wampmysqld But nothing, it stil doesn't works. My last bullet was to copy the content of my.ini to a file my-default.ini (a file that is placed in C:\wamp\bin\mysql\mysql5.6.12\ and that I don't know what is its mission). However it still doesn't work and the port is still 3306.

  Read the article

• Troubleshooting DTCPing Errors

  - by JimmyP

  So I am running DTC ping between 2 machines on our network and am getting the following error ++++++++++++++++++++++++++++++++++++++++++++++ DTCping 1.9 Report for WEB2 ++++++++++++++++++++++++++++++++++++++++++++++ RPC server is ready ++++++++++++Validating Remote Computer Name++++++++++++ 03-03, 13:39:45.099-->Start DTC connection test Name Resolution: internal-->10.20.3.236-->internal.something 03-03, 13:39:45.114-->Start RPC test (WEB2-->internal) Problem:fail to invoke remote RPC method Error(0x6BA) at dtcping.cpp @303 -->RPC pinging exception -->1722(The RPC server is unavailable.) RPC test failed I have also run RPC ping where I get what I beleive is the same error: C:\Program Files\Windows Resource Kits\Tools>rpcping -s internal Exception 1722 (0x000006BA) Number of records is: 4 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1722 Detection location is 323 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1237 Detection location is 313 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 311 Flags is 0 NumberOfParameters is 3 Long val: 135 Pointer val: 0 Pointer val: 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 318 Flags is 0 NumberOfParameters is 0 I'm pretty sure that the exception number 1722 is the key but I can't find any info about it. There may be a firewall with ports that need opening between the machines which I am checking with our sys admins now. But I can do a regular ping between the machines. Other than that I am reading a lot of articles talking about OS services and components I know nothing about and am having trouble finding any info on. Can anyone shed any light on this? FYI the machine is running Windows Server 2003 RS SP2.

  Read the article

• Yet Another ASP.NET MVC CRUD Tutorial

  - by Ricardo Peres

  I know that I have not posted much on MVC, mostly because I don’t use it on my daily life, but since I find it so interesting, and since it is gaining such popularity, I will be talking about it much more. This time, it’s about the most basic of scenarios: CRUD. Although there are several ASP.NET MVC tutorials out there that cover ordinary CRUD operations, I couldn’t find any that would explain how we can have also AJAX, optimistic concurrency control and validation, using Entity Framework Code First, so I set out to write one! I won’t go into explaining what is MVC, Code First or optimistic concurrency control, or AJAX, I assume you are all familiar with these concepts by now. Let’s consider an hypothetical use case, products. For simplicity, we only want to be able to either view a single product or edit this product. First, we need our model: 1: public class Product 2: { 3: public Product() 4: { 5: this.Details = new HashSet<OrderDetail>(); 6: } 7:  8: [Required] 9: [StringLength(50)] 10: public String Name 11: { 12: get; 13: set; 14: } 15:  16: [Key] 17: [ScaffoldColumn(false)] 18: [DatabaseGenerated(DatabaseGeneratedOption.Identity)] 19: public Int32 ProductId 20: { 21: get; 22: set; 23: } 24:  25: [Required] 26: [Range(1, 100)] 27: public Decimal Price 28: { 29: get; 30: set; 31: } 32:  33: public virtual ISet<OrderDetail> Details 34: { 35: get; 36: protected set; 37: } 38:  39: [Timestamp] 40: [ScaffoldColumn(false)] 41: public Byte[] RowVersion 42: { 43: get; 44: set; 45: } 46: } Keep in mind that this is a simple scenario. Let’s see what we have: A class Product, that maps to a product record on the database; A product has a required (RequiredAttribute) Name property which can contain up to 50 characters (StringLengthAttribute); The product’s Price must be a decimal value between 1 and 100 (RangeAttribute); It contains a set of order details, for each time that it has been ordered, which we will not talk about (Details); The record’s primary key (mapped to property ProductId) comes from a SQL Server IDENTITY column generated by the database (KeyAttribute, DatabaseGeneratedAttribute); The table uses a SQL Server ROWVERSION (previously known as TIMESTAMP) column for optimistic concurrency control mapped to property RowVersion (TimestampAttribute). Then we will need a controller for viewing product details, which will located on folder ~/Controllers under the name ProductController: 1: public class ProductController : Controller 2: { 3: [HttpGet] 4: public ViewResult Get(Int32 id = 0) 5: { 6: if (id != 0) 7: { 8: using (ProductContext ctx = new ProductContext()) 9: { 10: return (this.View("Single", ctx.Products.Find(id) ?? new Product())); 11: } 12: } 13: else 14: { 15: return (this.View("Single", new Product())); 16: } 17: } 18: } If the requested product does not exist, or one was not requested at all, one with default values will be returned. I am using a view named Single to display the product’s details, more on that later. As you can see, it delegates the loading of products to an Entity Framework context, which is defined as: 1: public class ProductContext: DbContext 2: { 3: public DbSet<Product> Products 4: { 5: get; 6: set; 7: } 8: } Like I said before, I’ll keep it simple for now, only aggregate root Product is available. The controller will use the standard routes defined by the Visual Studio ASP.NET MVC 3 template: 1: routes.MapRoute( 2: "Default", // Route name 3: "{controller}/{action}/{id}", // URL with parameters 4: new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults 5: ); Next, we need a view for displaying the product details, let’s call it Single, and have it located under ~/Views/Product: 1: <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Product>" %> 2: <!DOCTYPE html> 3:  4: <html> 5: <head runat="server"> 6: <title>Product</title> 7: <script src="/Scripts/jquery-1.7.2.js" type="text/javascript"></script> 1:  2: <script src="/Scripts/jquery-ui-1.8.19.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.unobtrusive-ajax.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.unobtrusive.js" type="text/javascript"> 1: </script> 2: <script type="text/javascript"> 3: function onFailure(error) 4: { 5: } 6:  7: function onComplete(ctx) 8: { 9: } 10:  11: </script> 8: </head> 9: <body> 10: <div> 11: <% 1: : this.Html.ValidationSummary(false) %> 12: <% 1: using (this.Ajax.BeginForm("Edit", "Product", new AjaxOptions{ HttpMethod = FormMethod.Post.ToString(), OnSuccess = "onSuccess", OnFailure = "onFailure" })) { %> 13: <% 1: : this.Html.EditorForModel() %> 14: <input type="submit" name="submit" value="Submit" /> 15: <% 1: } %> 16: </div> 17: </body> 18: </html> Yes… I am using ASPX syntax… sorry about that!   I implemented an editor template for the Product class, which must be located on the ~/Views/Shared/EditorTemplates folder as file Product.ascx: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<Product>" %> 2: <div> 3: <%: this.Html.HiddenFor(model => model.ProductId) %> 4: <%: this.Html.HiddenFor(model => model.RowVersion) %> 5: <fieldset> 6: <legend>Product</legend> 7: <div class="editor-label"> 8: <%: this.Html.LabelFor(model => model.Name) %> 9: </div> 10: <div class="editor-field"> 11: <%: this.Html.TextBoxFor(model => model.Name) %> 12: <%: this.Html.ValidationMessageFor(model => model.Name) %> 13: </div> 14: <div class="editor-label"> 15: <%= this.Html.LabelFor(model => model.Price) %> 16: </div> 17: <div class="editor-field"> 18: <%= this.Html.TextBoxFor(model => model.Price) %> 19: <%: this.Html.ValidationMessageFor(model => model.Price) %> 20: </div> 21: </fieldset> 22: </div> One thing you’ll notice is, I am including both the ProductId and the RowVersion properties as hidden fields; they will come handy later or, so that we know what product and version we are editing. The other thing is the included JavaScript files: jQuery, jQuery UI and unobtrusive validations. Also, I am not using the Content extension method for translating relative URLs, because that way I would lose JavaScript intellisense for jQuery functions. OK, so, at this moment, I want to add support for AJAX and optimistic concurrency control. So I write a controller method like this: 1: [HttpPost] 2: [AjaxOnly] 3: [Authorize] 4: public JsonResult Edit(Product product) 5: { 6: if (this.TryValidateModel(product) == true) 7: { 8: using (BlogContext ctx = new BlogContext()) 9: { 10: Boolean success = false; 11:  12: ctx.Entry(product).State = (product.ProductId == 0) ? EntityState.Added : EntityState.Modified; 13:  14: try 15: { 16: success = (ctx.SaveChanges() == 1); 17: } 18: catch (DbUpdateConcurrencyException) 19: { 20: ctx.Entry(product).Reload(); 21: } 22:  23: return (this.Json(new { Success = success, ProductId = product.ProductId, RowVersion = Convert.ToBase64String(product.RowVersion) })); 24: } 25: } 26: else 27: { 28: return (this.Json(new { Success = false, ProductId = 0, RowVersion = String.Empty })); 29: } 30: } So, this method is only valid for HTTP POST requests (HttpPost), coming from AJAX (AjaxOnly, from MVC Futures), and from authenticated users (Authorize). It returns a JSON object, which is what you would normally use for AJAX requests, containing three properties: Success: a boolean flag; RowVersion: the current version of the ROWVERSION column as a Base-64 string; ProductId: the inserted product id, as coming from the database. If the product is new, it will be inserted into the database, and its primary key will be returned into the ProductId property. Success will be set to true; If a DbUpdateConcurrencyException occurs, it means that the value in the RowVersion property does not match the current ROWVERSION column value on the database, so the record must have been modified between the time that the page was loaded and the time we attempted to save the product. In this case, the controller just gets the new value from the database and returns it in the JSON object; Success will be false. Otherwise, it will be updated, and Success, ProductId and RowVersion will all have their values set accordingly. So let’s see how we can react to these situations on the client side. Specifically, we want to deal with these situations: The user is not logged in when the update/create request is made, perhaps the cookie expired; The optimistic concurrency check failed; All went well. So, let’s change our view: 1: <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Product>" %> 2: <%@ Import Namespace="System.Web.Security" %> 3:  4: <!DOCTYPE html> 5:  6: <html> 7: <head runat="server"> 8: <title>Product</title> 9: <script src="/Scripts/jquery-1.7.2.js" type="text/javascript"></script> 1:  2: <script src="/Scripts/jquery-ui-1.8.19.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.unobtrusive-ajax.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.js" type="text/javascript"> 1: </script> 2: <script src="/Scripts/jquery.validate.unobtrusive.js" type="text/javascript"> 1: </script> 2: <script type="text/javascript"> 3: function onFailure(error) 4: { 5: window.alert('An error occurred: ' + error); 6: } 7:  8: function onSuccess(ctx) 9: { 10: if (typeof (ctx.Success) != 'undefined') 11: { 12: $('input#ProductId').val(ctx.ProductId); 13: $('input#RowVersion').val(ctx.RowVersion); 14:  15: if (ctx.Success == false) 16: { 17: window.alert('An error occurred while updating the entity: it may have been modified by third parties. Please try again.'); 18: } 19: else 20: { 21: window.alert('Saved successfully'); 22: } 23: } 24: else 25: { 26: if (window.confirm('Not logged in. Login now?') == true) 27: { 28: document.location.href = '<%: FormsAuthentication.LoginUrl %>?ReturnURL=' + document.location.pathname; 29: } 30: } 31: } 32:  33: </script> 10: </head> 11: <body> 12: <div> 13: <% 1: : this.Html.ValidationSummary(false) %> 14: <% 1: using (this.Ajax.BeginForm("Edit", "Product", new AjaxOptions{ HttpMethod = FormMethod.Post.ToString(), OnSuccess = "onSuccess", OnFailure = "onFailure" })) { %> 15: <% 1: : this.Html.EditorForModel() %> 16: <input type="submit" name="submit" value="Submit" /> 17: <% 1: } %> 18: </div> 19: </body> 20: </html> The implementation of the onSuccess function first checks if the response contains a Success property, if not, the most likely cause is the request was redirected to the login page (using Forms Authentication), because it wasn’t authenticated, so we navigate there as well, keeping the reference to the current page. It then saves the current values of the ProductId and RowVersion properties to their respective hidden fields. They will be sent on each successive post and will be used in determining if the request is for adding a new product or to updating an existing one. The only thing missing is the ability to insert a new product, after inserting/editing an existing one, which can be easily achieved using this snippet: 1: <input type="button" value="New" onclick="$('input#ProductId').val('');$('input#RowVersion').val('');"/> And that’s it.

  Read the article

• Loosely coupled .NET Cache Provider using Dependency Injection

  - by Rhames

  I have recently been reading the excellent book “Dependency Injection in .NET”, written by Mark Seemann. I do not generally buy software development related books, as I never seem to have the time to read them, but I have found the time to read Mark’s book, and it was time well spent I think. Reading the ideas around Dependency Injection made me realise that the Cache Provider code I wrote about earlier (see http://geekswithblogs.net/Rhames/archive/2011/01/10/using-the-asp.net-cache-to-cache-data-in-a-model.aspx) could be refactored to use Dependency Injection, which should produce cleaner code. The goals are to: Separate the cache provider implementation (using the ASP.NET data cache) from the consumers (loose coupling). This will also mean that the dependency on System.Web for the cache provider does not ripple down into the layers where it is being consumed (such as the domain layer). Provide a decorator pattern to allow a consumer of the cache provider to be implemented separately from the base consumer (i.e. if we have a base repository, we can decorate this with a caching version). Although I used the term repository, in reality the cache consumer could be just about anything. Use constructor injection to provide the Dependency Injection, with a suitable DI container (I use Castle Windsor). The sample code for this post is available on github, https://github.com/RobinHames/CacheProvider.git ICacheProvider In the sample code, the key interface is ICacheProvider, which is in the domain layer. 1: using System; 2: using System.Collections.Generic; 3:   4: namespace CacheDiSample.Domain 5: { 6: public interface ICacheProvider<T> 7: { 8: T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 9: IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 10: } 11: }   This interface contains two methods to retrieve data from the cache, either as a single instance or as an IEnumerable. the second paramerter is of type Func<T>. This is the method used to retrieve data if nothing is found in the cache. The ASP.NET implementation of the ICacheProvider interface needs to live in a project that has a reference to system.web, typically this will be the root UI project, or it could be a separate project. The key thing is that the domain or data access layers do not need system.web references adding to them. In my sample MVC application, the CacheProvider is implemented in the UI project, in a folder called “CacheProviders”: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Caching; 6: using CacheDiSample.Domain; 7:   8: namespace CacheDiSample.CacheProvider 9: { 10: public class CacheProvider<T> : ICacheProvider<T> 11: { 12: public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 13: { 14: return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry); 15: } 16:   17: public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 18: { 19: return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry); 20: } 21:   22: #region Helper Methods 23:   24: private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 25: { 26: U value; 27: if (!TryGetValue<U>(key, out value)) 28: { 29: value = retrieveData(); 30: if (!absoluteExpiry.HasValue) 31: absoluteExpiry = Cache.NoAbsoluteExpiration; 32:   33: if (!relativeExpiry.HasValue) 34: relativeExpiry = Cache.NoSlidingExpiration; 35:   36: HttpContext.Current.Cache.Insert(key, value, null, absoluteExpiry.Value, relativeExpiry.Value); 37: } 38: return value; 39: } 40:   41: private bool TryGetValue<U>(string key, out U value) 42: { 43: object cachedValue = HttpContext.Current.Cache.Get(key); 44: if (cachedValue == null) 45: { 46: value = default(U); 47: return false; 48: } 49: else 50: { 51: try 52: { 53: value = (U)cachedValue; 54: return true; 55: } 56: catch 57: { 58: value = default(U); 59: return false; 60: } 61: } 62: } 63:   64: #endregion 65:   66: } 67: }   The FetchAndCache helper method checks if the specified cache key exists, if it does not, the Func<U> retrieveData method is called, and the results are added to the cache. Using Castle Windsor to register the cache provider In the MVC UI project (my application root), Castle Windsor is used to register the CacheProvider implementation, using a Windsor Installer: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain; 6: using CacheDiSample.CacheProvider; 7:   8: namespace CacheDiSample.WindsorInstallers 9: { 10: public class CacheInstaller : IWindsorInstaller 11: { 12: public void Install(IWindsorContainer container, IConfigurationStore store) 13: { 14: container.Register( 15: Component.For(typeof(ICacheProvider<>)) 16: .ImplementedBy(typeof(CacheProvider<>)) 17: .LifestyleTransient()); 18: } 19: } 20: }   Note that the cache provider is registered as a open generic type. Consuming a Repository I have an existing couple of repository interfaces defined in my domain layer: IRepository.cs 1: using System; 2: using System.Collections.Generic; 3:   4: using CacheDiSample.Domain.Model; 5:   6: namespace CacheDiSample.Domain.Repositories 7: { 8: public interface IRepository<T> 9: where T : EntityBase 10: { 11: T GetById(int id); 12: IList<T> GetAll(); 13: } 14: }   IBlogRepository.cs 1: using System; 2: using CacheDiSample.Domain.Model; 3:   4: namespace CacheDiSample.Domain.Repositories 5: { 6: public interface IBlogRepository : IRepository<Blog> 7: { 8: Blog GetByName(string name); 9: } 10: }   These two repositories are implemented in the DataAccess layer, using Entity Framework to retrieve data (this is not important though). One important point is that in the BaseRepository implementation of IRepository, the methods are virtual. This will allow the decorator to override them. The BlogRepository is registered in a RepositoriesInstaller, again in the MVC UI project. 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8:   9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15: container.Register(Component.For<IBlogRepository>() 16: .ImplementedBy<BlogRepository>() 17: .LifestyleTransient() 18: .DependsOn(new 19: { 20: nameOrConnectionString = "BloggingContext" 21: })); 22: } 23: } 24: }   Now I can inject a dependency on the IBlogRepository into a consumer, such as a controller in my sample code: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6:   7: using CacheDiSample.Domain.Repositories; 8: using CacheDiSample.Domain.Model; 9:   10: namespace CacheDiSample.Controllers 11: { 12: public class HomeController : Controller 13: { 14: private readonly IBlogRepository blogRepository; 15:   16: public HomeController(IBlogRepository blogRepository) 17: { 18: if (blogRepository == null) 19: throw new ArgumentNullException("blogRepository"); 20:   21: this.blogRepository = blogRepository; 22: } 23:   24: public ActionResult Index() 25: { 26: ViewBag.Message = "Welcome to ASP.NET MVC!"; 27:   28: var blogs = blogRepository.GetAll(); 29:   30: return View(new Models.HomeModel { Blogs = blogs }); 31: } 32:   33: public ActionResult About() 34: { 35: return View(); 36: } 37: } 38: }   Consuming the Cache Provider via a Decorator I used a Decorator pattern to consume the cache provider, this means my repositories follow the open/closed principle, as they do not require any modifications to implement the caching. It also means that my controllers do not have any knowledge of the caching taking place, as the DI container will simply inject the decorator instead of the root implementation of the repository. The first step is to implement a BlogRepository decorator, with the caching logic in it. Note that this can reside in the domain layer, as it does not require any knowledge of the data access methods. BlogRepositoryWithCaching.cs 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5:   6: using CacheDiSample.Domain.Model; 7: using CacheDiSample.Domain; 8: using CacheDiSample.Domain.Repositories; 9:   10: namespace CacheDiSample.Domain.CacheDecorators 11: { 12: public class BlogRepositoryWithCaching : IBlogRepository 13: { 14: // The generic cache provider, injected by DI 15: private ICacheProvider<Blog> cacheProvider; 16: // The decorated blog repository, injected by DI 17: private IBlogRepository parentBlogRepository; 18:   19: public BlogRepositoryWithCaching(IBlogRepository parentBlogRepository, ICacheProvider<Blog> cacheProvider) 20: { 21: if (parentBlogRepository == null) 22: throw new ArgumentNullException("parentBlogRepository"); 23:   24: this.parentBlogRepository = parentBlogRepository; 25:   26: if (cacheProvider == null) 27: throw new ArgumentNullException("cacheProvider"); 28:   29: this.cacheProvider = cacheProvider; 30: } 31:   32: public Blog GetByName(string name) 33: { 34: string key = string.Format("CacheDiSample.DataAccess.GetByName.{0}", name); 35: // hard code 5 minute expiry! 36: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 37: return cacheProvider.Fetch(key, () => 38: { 39: return parentBlogRepository.GetByName(name); 40: }, 41: null, relativeCacheExpiry); 42: } 43:   44: public Blog GetById(int id) 45: { 46: string key = string.Format("CacheDiSample.DataAccess.GetById.{0}", id); 47:   48: // hard code 5 minute expiry! 49: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 50: return cacheProvider.Fetch(key, () => 51: { 52: return parentBlogRepository.GetById(id); 53: }, 54: null, relativeCacheExpiry); 55: } 56:   57: public IList<Blog> GetAll() 58: { 59: string key = string.Format("CacheDiSample.DataAccess.GetAll"); 60:   61: // hard code 5 minute expiry! 62: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 63: return cacheProvider.Fetch(key, () => 64: { 65: return parentBlogRepository.GetAll(); 66: }, 67: null, relativeCacheExpiry) 68: .ToList(); 69: } 70: } 71: }   The key things in this caching repository are: I inject into the repository the ICacheProvider<Blog> implementation, via the constructor. This will make the cache provider functionality available to the repository. I inject the parent IBlogRepository implementation (which has the actual data access code), via the constructor. This will allow the methods implemented in the parent to be called if nothing is found in the cache. I override each of the methods implemented in the repository, including those implemented in the generic BaseRepository. Each override of these methods follows the same pattern. It makes a call to the CacheProvider.Fetch method, and passes in the parentBlogRepository implementation of the method as the retrieval method, to be used if nothing is present in the cache. Configuring the Caching Repository in the DI Container The final piece of the jigsaw is to tell Castle Windsor to use the BlogRepositoryWithCaching implementation of IBlogRepository, but to inject the actual Data Access implementation into this decorator. This is easily achieved by modifying the RepositoriesInstaller to use Windsor’s implicit decorator wiring: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8:   9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15:   16: // Use Castle Windsor implicit wiring for the block repository decorator 17: // Register the outermost decorator first 18: container.Register(Component.For<IBlogRepository>() 19: .ImplementedBy<BlogRepositoryWithCaching>() 20: .LifestyleTransient()); 21: // Next register the IBlogRepository inmplementation to inject into the outer decorator 22: container.Register(Component.For<IBlogRepository>() 23: .ImplementedBy<BlogRepository>() 24: .LifestyleTransient() 25: .DependsOn(new 26: { 27: nameOrConnectionString = "BloggingContext" 28: })); 29: } 30: } 31: }   This is all that is needed. Now if the consumer of the repository makes a call to the repositories method, it will be routed via the caching mechanism. You can test this by stepping through the code, and seeing that the DataAccess.BlogRepository code is only called if there is no data in the cache, or this has expired. The next step is to add the SQL Cache Dependency support into this pattern, this will be a future post.

  Read the article

• [Architecture] Roles for white-label service access.

  - by saurabhj

  Okay, I know I'm doing something wrong - but can't figure out a better way. I am developing a website which is going to allow users to setup their own mini-websites. Something like Ning. Also, I have only 1 basic login and access to each mini website is provided (right now) via roles. So the way I am doing this right now is: Everytime a new mini website is created - say blah, I create 2 roles in my application. blah_users and blah_admin The user creating the mini website is given the role - blah_admin and every other user wanting to join this mini website (or network) is given the role - blah_user. Anyone can view data from any website. However to add data, one must be a member of that mini site (must have the blah_user role assigned) The problem that I am facing is that by doing a role based system, I'm having to do loads of stuff manually. Asp.Net 2 controls which work on the User.IsAunthenticated property are basically useless to me now because along with the IsAuthenticated property, I must also check if the user has the proper role. I'm guessing there is a better way to architect the system but I am not sure how. Any ideas? This website is being developed in ASP.Net 2 on IIS 6. Thanks a tonne!

  Read the article

• Original object is also changed when values of cloned object are changed.

  - by fari

  I am trying to use clone but the original object is also changed when values of cloned object are changed. As you can see KalaGameState does not use any objects so a shallow copy should work. /** * This class represents the current state of a Kala game, including * which player's turn it is along with the state of the board; i.e. the * numbers of stones in each side pit, and each player's 'kala'). */ public class KalaGameState implements Cloneable { // your code goes here private int turn; private int[] sidePit; private boolean game; public Object clone() { try { return super.clone(); } catch (CloneNotSupportedException e) { // This should never happen throw new InternalError(e.toString()); } } /** * Constructs a new GameState with a specified number of stones in each * player's side pits. * @param startingStones the number of starting stones in each side pit. * @throws InvalidStartingStonesException if startingStones not in the range 1-10. */ public KalaGameState(int startingStones) throws InvalidStartingStonesException { game=true; turn=0; sidePit=new int[14]; for (int i=0; i <= 13 ; i++) { sidePit[i] = startingStones; } sidePit[6] =0; sidePit[13] =0; // your code goes here } /** * Returns the ID of the player whose turn it is. * @return A value of 0 = Player A, 1 = Player B. */ public int getTurn() { return turn; // your code goes here } /** * Returns the current kala for a specified player. * @param playerNum A value of 0 for Player A, 1 for Player B. * @throws IllegalPlayerNumException if the playerNum parameter * is not 0 or 1. */ public int getKala(int playerNum) throws IllegalPlayerNumException { if(playerNum!=0 || playerNum!=1) throw new IllegalPlayerNumException(playerNum); if(playerNum==0) return sidePit[6]; else return sidePit[13]; // your code goes here } /** * Returns the current number of stones in the specified pit for * the player whose turn it is. * @param sidePitNum the side pit being queried in the range 1-6. * @throws IllegalSidePitNumException if the sidePitNum parameter. * is not in the range 1-6. */ public int getNumStones(int sidePitNum) throws IllegalSidePitNumException { if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); if(turn==0) return sidePit[sidePitNum]; else return sidePit[sidePitNum+6]; // your code goes here } /** * Returns the current number of stones in the specified pit for a specified player. * @param playerNum the player whose kala is sought. (0 = Player A, 1 = Player B). * @param sidePitNum the side pit being queried (in the range 1-6). * @throws IllegalPlayerNumException if the playerNum parameter is not 0 or 1. * @throws IllegalSidePitNumException if the sidePitNum parameter is not in the * range 1-6. */ public int getNumStones(int playerNum, int sidePitNum) throws IllegalPlayerNumException, IllegalSidePitNumException { /*if(playerNum>2) throw new IllegalPlayerNumException(playerNum); if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); */ if(playerNum==0) return sidePit[sidePitNum]; else if(playerNum==1) return sidePit[sidePitNum+7]; else return sidePit[sidePitNum]; } /** * Returns the current score for a specified player - the player's * kala plus the number of stones in each of their side pits. * @param playerNum the player whose kala is sought. (0 = Player A, 1 = Player B). * @throws IllegalPlayerNumException if the playerNum parameter is not 0 or 1. */ public int getScore(int playerNum) throws IllegalPlayerNumException { if(playerNum>1) throw new IllegalPlayerNumException(playerNum); int score=0; if(playerNum==0) { for(int i=0;i<=5;i++) score=score+sidePit[i]; score=score+sidePit[6]; } else { for(int i=7;i<=12;i++) score=score+sidePit[i]; score=score+sidePit[13]; } // your code goes here return score; } private int getSidePitArrayIndex(int sidePitNum) throws IllegalSidePitNumException { if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); if(turn==0) { return sidePitNum--; } else { return sidePitNum+6; } } public boolean gameOver() { int stone=0; if(turn==0) for(int i=0;i<=5;i++) stone=stone+getNumStones(i); else for(int i=7;i<=12;i++) stone=stone+getNumStones(i-7); if (stone==0) game=false; return game; } /** * Makes a move for the player whose turn it is. * @param sidePitNum the side pit being queried (should be in the range 1-6) * @throws IllegalSidePitNumException if the sidePitNum parameter is not in the range 1-6. * @throws IllegalMoveException if the side pit is empty and has no stones in it. */ public void makeMove(int sidePitNum) throws IllegalSidePitNumException, IllegalMoveException { if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); /* if(turn==0) { if(sidePit[sidePitNum-1]==0) throw new IllegalMoveException(sidePitNum); } else { if(sidePit[sidePitNum-1+7]==0) throw new IllegalMoveException(sidePitNum); } */ sidePitNum--; int temp=sidePitNum; int pitNum=sidePitNum+1; int stones=getNumStones(turn,sidePitNum); if(turn==0) sidePit[sidePitNum]=0; else { sidePitNum=sidePitNum+7; sidePit[sidePitNum]=0; pitNum=pitNum+7; } while(stones!=0) { if(turn==0) { sidePit[pitNum]=sidePit[pitNum]+1; stones--; pitNum++; if(pitNum==13) pitNum=0; } else { sidePit[pitNum]=sidePit[pitNum]+1; stones--; pitNum++; if(pitNum==6) pitNum=7; else if(pitNum==14) pitNum=0; } } boolean res=anotherTurn(pitNum); if(!res){ capture(pitNum,temp); if(turn==0) turn=1; else turn=0;} } private boolean anotherTurn(int pitNum) {pitNum--; boolean temp=false; if(turn==0) {if(pitNum==6) {turn=0; temp=true; } } else if(pitNum==-1) {turn=1; temp=true; } return temp; } private void capture(int pitNum, int pit) { pitNum--; if(turn==0){ if(sidePit[pitNum]==1 && pitNum<6) { if(pitNum==0) { sidePit[6]=sidePit[6]+sidePit[12]+1; sidePit[12]=0; } else if(pitNum==1) { sidePit[6]=sidePit[6]+sidePit[11]+1; sidePit[11]=0; } else if(pitNum==2) { sidePit[6]=sidePit[6]+sidePit[10]+1; sidePit[10]=0; } else if(pitNum==3) { sidePit[6]=sidePit[6]+sidePit[9]+1; sidePit[9]=0; } else if(pitNum==4) { sidePit[6]=sidePit[6]+sidePit[8]+1; sidePit[8]=0; } else if(pitNum==5) { sidePit[6]=sidePit[6]+sidePit[7]+1; sidePit[7]=0; } sidePit[pitNum]=0; } } if(turn==1) { //pitNum=pitNum; if(sidePit[pitNum]==1 && pit+7>6) { if(pitNum==7) { sidePit[13]=sidePit[13]+sidePit[5]+1; sidePit[7]=0; } else if(pitNum==8) { sidePit[13]=sidePit[13]+sidePit[4]+1; sidePit[4]=0; } else if(pitNum==9) { sidePit[13]=sidePit[13]+sidePit[3]+1; sidePit[3]=0; } else if(pitNum==10) { sidePit[13]=sidePit[13]+sidePit[2]+1; sidePit[2]=0; } else if(pitNum==11) { sidePit[13]=sidePit[13]+sidePit[1]+1; sidePit[1]=0; } else if(pitNum==12) { sidePit[13]=sidePit[13]+sidePit[0]+1; sidePit[0]=0; } sidePit[pitNum]=0; } } } } import java.io.BufferedReader; import java.io.InputStreamReader; public class RandomPlayer extends KalaPlayer{ //KalaGameState state; public int chooseMove(KalaGameState gs) throws NoMoveAvailableException {int[] moves; moves=getMoves(gs); try{ for(int i=0;i<=5;i++) System.out.println(moves[i]); for(int i=0;i<=5;i++) { if(moves[i]==1) { KalaGameState state=(KalaGameState) gs.clone(); state.makeMove(moves[i]); gs.getTurn(); moves[i]=evalValue(state.getScore(0),state.getScore(1)); } } } catch(IllegalMoveException e) { System.out.println(e); //chooseMove(state); } return 10; } private int evalValue(int score0,int score1) { int score=0; //int score0=0; // int score1=0; //getScore(0); //score1=state.getScore(1); //if((state.getTurn())==0) score=score1-score0; //else //score=score1-score0; System.out.println("score: "+score); return score; } public int[] getMoves(KalaGameState gs) { int[] moves=new int[6]; for(int i=1;i<=6;i++) { if(gs.getNumStones(i)!=0) moves[i-1]=1; else moves[i-1]=0; } return moves; } } Can you explain what is going wrong, please?

  Read the article

• read the currency format

  - by user485783

  perhaps for some people this is easy, but I want to learn There are 2 currency formats: first currency format is 1,123,123.12 and this format may be like $1,123,123.12 or 1,123,123.12€ and second currency format is 1.123.123,12 and this may be such $1.123.123,12 or 1.123.123,12€ so the difference is the placement of dots and commas The above format will be $this->value('one of the currency format insert here'); e.g. $this->value('$1,123,123.12'); or $this->value('1.123.123,12€'); that I want to know is the code if (first currency format) {use blah .. blah ..} elseif (second currency format) {use blah .. blah ..} else {/ / unsupported format} so how the code to identify whether the entry is input the first currency format or second currency format? thanks for the your pointers and ideas. UPDATED: I apologize for mistake in giving examples When I tried to test the code I have a little confused because it seems not working then I changed my prevoious parts, so that $value['amount'] it may be use first currency format 1,123,123.12 and this format may be like $1,123,123.12 or 1,123,123.12€ and second currency format 1.123.123,12 and this may be such $1.123.123,12 or 1.123.123,12€ then the value['amount'] will identify first with code like the following conditional class curr_format { private bla...bla..1 private bla...bla..2 var etc.. public function curr_format ($bla...,$and_bla..) { //then make conditional is here if (first currency format) {//use blah .. blah ..} elseif (second currency format) {//use blah .. blah ..} else {/ / unsupported format} //another codes.. at the end output as look like: $identify = new curr_format(); echo $identify->curr_format($value['amount'],$else_statement);

  Read the article

• View Maps and Get Directions in Google Chrome

  - by Asian Angel

  Every so often we all need to look at a map for reference purposes or to get directions. If you are looking for a great quick reference app then join us as we look at the Mini Google Maps extension for Google Chrome. Mini Google Maps in Action While this may look like a rather basic map extension there is more to it than meets the eye at first glance. Here is the default view when you open Mini Google Maps for the first time. Things that we really liked about this extension were: Three different aerial views available (Map, Satellite, & Terrain) Three different viewing sizes available (and the extension remembers your chosen size) The ability to get directions in combination with a map We decided to try each of the viewing sizes available…here you can see the “Medium Setting”. Notice that the scale stays the same but you get more territory included to view. Then the “Large Setting”…which we infinitely preferred to the others. Once again look at the amount of territory included by default…very nice. Switching over to the “Satellite View”… Followed by the “Terrain View”. For our first example we decided to peek at Vancouver, British Columbia. After zooming out a little bit we had a very nice looking map. For the next test we asked for directions from Vancouver to Toronto. Both the directions and map turned out very well. And just for fun we looked up Paris, France with the “Satellite View”. Conclusion If you find yourself needing to view a map or get directions often then the Mini Google Maps extension will be a very useful tool for you. Links Download the Mini Google Maps extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Get Maps and Directions to Your Contacts in Outlook 2007Stupid Geek Tricks: Browse the Web from OutlookView the Time & Date in Chrome When Hiding Your TaskbarHow to Make Google Chrome Your Default BrowserAccess Google Chrome’s Special Pages the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Three Steps to Becoming an Expert Oracle Linux System Administrator

  - by Antoinette O'Sullivan

  Oracle provides a complete system administration curriculum to take you from your initial experience of Unix to being an expert Oracle Linux system administrator. You can take these live instructor-led courses from your own desk through live-virtual events or by traveling to an education center through in-class events. Step 1: Unix and Linux Essentials This 3-day course is designed for users and administrators who are new to Oracle Linux. It will help you develop the basic UNIX skills needed to interact comfortably and confidently with the operating system. Below is a sample of the in-class events already on the schedule.  Location  Date  Delivery Language  Vivoorde, Belgium  28 October 2013  English  Berlin, Germany  15 July 2013  German  Utrecht, Netherlands  19 August 2013  Dutch  Bucarest, Romania  12 August 2013  Romanian  Ankara, Turkey  6 January 2013  Turkish  Nairobi, Kenya  5 August 2013  English  Kaduna, Nigeria  15 July 2013  English   Woodmead, South Africa  15 July 2013  English   Jakarta, Indonesia  23 September 2013  English  Petaling Jaya, Malaysia  22 July 2013  English  Makati City, Philippines  3 July 2013  English  Bangkok, Thailand  20 November 2013  English  Auckland, New Zealand  5 August 2013  English  Melbourne, Australia  12 August 2013  English  Ottawa, Montreal, Toronto, Canada  3 September 2013  English  San Francisco and San Jose, CA, United States  15 July 2013  English  Reston, VA, United States  7 August 2013  English  Edison, NJ, and King of Prussia, PA, United States  3 September 2013  English  Denver, CO, United States  25 September 2013  English  Cambridge, MA, and Roseville MN, United States  6 November 2013  English  Phoenix, AZ, and Sacramento, CA, United States  25 November 2013  English Step 2: Oracle Linux System Administration Through this 5-day course, become a knowledgeable Oracle Linux system administrator, learning how to install Oracle Linux and the benefits of Oracle's Unbreakable Enterprise Kernel and Ksplice. Below is a sample of in-class events already on the schedule.  Location  Date  Delivery Language  Vienna, Austria  1 July 2013  German  Vivoorde, Belgium  18 November 2013  English  Zagreb, Croatia  16 September 2013  Croatian  London, England  3 September 2013  English  Manchester, England  9 September 2013  English  Paris, France  29 July 2013  French  Budapest, Hungary  8 July 2013  Hungarian  Utrecht, Netherland  2 September 2013  Dutch  Warsaw, Poland  15 July 2013  Polish  Bucharest, Romania  2 December 2013  Romanian  Ankara, Turkey  7 October 2013  Turkish  Istanbul, Turkey  9 September 2013  Turkish  Nairobi, Kenya  12 August 2013  English  Petaling Jaya, Malaysia  29 July 2013  English  Kuala Lumpur, Malaysia  21 October 2013  English  Makati City, Philippines  8 July 2013  English  Singapore  24 July 2013  English  Bangkok, Thailand  26 July 2013  English  Canberra, Australia  19 August 2013  English  Melbourne, Australia  16 September 2013  English   Sydney, Australia 19 August 2013   English   Mississauga, Canada  26 August 2013  English  Ottawa, Canada  4 November 2013  English  Phoenix, AZ, United States  7 October 2013  English  Belmont, CA, United States  23 September 2013  English  Irvine, CA, United States  18 November 2013  English  Sacramento, CA, United States  19 August 2013  English  San Francisco, CA, United States  15 July 2013  English  Denver, CO, United States  19 August 2013  English  Schaumburg, IL, United States  26 August 2013  English  Indianapolis, IN, United States  14 October 2013  English  Columbia, MD, United States  30 September 2013  English  Roseville, MN, United States  19 August 2013  English  St Louis, MO, United States  7 October 2013  English  Edison, NJ, United States  28 October 2013  English  Beaverton, OR, United States  12 August 2013  English  Pittsburg, PA, United States 9 December 2013   English  Reston, VA, United States 12 August 2013   English  Brookfield, WI, United States 30 September 2013   English  Sao Paolo, Brazil 15 July 2013   Brazilian Portugese Step 3: Oracle Linux Advanced System Administration This new 3-day course is ideal for administrators who want to learn about managing resources and file systems while developing troubleshooting and advanced storage administration skills. You will learn about Linux Containers, Cgroups, btrfs, DTrace and more. Below is a sample of in-class events already on the schedule.  Location  Date  Delivery Language  Melbourne, Australia  9 October 2013  English  Roseville, MN, United States  3 September 2013  English To register for or learn more about these courses, go to http://oracle.com/education/linux. Watch this video to learn more about Oracle's operating system training.

  Read the article

• How Does One Make a Sitemap for a Flex Website?

  - by Laxmidi

  Hi, I've got a Flex website and I'm not sure how to make a sitemap for it. For a standard HTML page, sitemaps are straight forward. As Flex sites use a "pageless" architecture, I'm not sure what I should do. If anyone has any suggestions, please let me know. UPDATE: As I understand it, Google doesn't look at anything after the # in a URL. So in a deeplinked Flex site, Google wouldn't see the second page-- where it reads view=12 in the sample sitemap below. Or does Google handle sitemaps differently? Should I go ahead and make a sitemap with all of the deeplinked URLS: http://brainpinata.com/#view=12, http://brainpinata.com/#view=4, etc.           http://www.brainpinata.com/       2010-12-01       weekly       1.0           http://brainpinata.com/#view=12       2010-12-01       weekly       1.0     Thank you. -Laxmidi

  Read the article

• Simple Preferred time control using silverlight 3.

  - by mohanbrij

  Here I am going to show you a simple preferred time control, where you can select the day of the week and the time of the day. This can be used in lots of place where you may need to display the users preferred times. Sample screenshot is attached below. This control is developed using Silverlight 3 and VS2008, I am also attaching the source code with this post. This is a very basic example. You can download and customize if further for your requirement if you want. I am trying to explain in few words how this control works and what are the different ways in which you can customize it further. File: PreferredTimeControl.xaml, in this file I have just hardcoded the controls and their positions which you can see in the screenshot above. In this example, to change the start day of the week and time, you will have to go and change the design in XAML file, its not controlled by your properties or implementation classes. You can also customize it to change the start day of the week, Language, Display format, styles, etc, etc. File: PreferredTimeControl.xaml.cs, In this control using the code below, first I am taking all the checkbox from my form and store it in the Global Variable, which I can use across my page. List<CheckBox> checkBoxList; #region Constructor public PreferredTimeControl() { InitializeComponent(); GetCheckboxes();//Keep all the checkbox in List in the Load itself } #endregion #region Helper Methods private List<CheckBox> GetCheckboxes() { //Get all the CheckBoxes in the Form checkBoxList = new List<CheckBox>(); foreach (UIElement element in LayoutRoot.Children) { if (element.GetType().ToString() == "System.Windows.Controls.CheckBox") { checkBoxList.Add(element as CheckBox); } } return checkBoxList; } Then I am exposing the two methods which you can use in the container form to get and set the values in this controls. /// <summary> /// Set the Availability on the Form, with the Provided Timings /// </summary> /// <param name="selectedTimings">Provided timings comes from the DB in the form 11,12,13....37 /// Where 11 refers to Monday Morning, 12 Tuesday Morning, etc /// Here 1, 2, 3 is for Morning, Afternoon and Evening respectively, and for weekdays /// 1,2,3,4,5,6,7 where 1 is for Monday, Tuesday, Wednesday, Thrusday, Friday, Saturday and Sunday respectively /// So if we want Monday Morning, we can can denote it as 11, similarly for Saturday Evening we can write 36, etc /// </param> public void SetAvailibility(string selectedTimings) { foreach (CheckBox chk in checkBoxList) { chk.IsChecked = false; } if (!String.IsNullOrEmpty(selectedTimings)) { string[] selectedString = selectedTimings.Split(','); foreach (string selected in selectedString) { foreach (CheckBox chk in checkBoxList) { if (chk.Tag.ToString() == selected) { chk.IsChecked = true; } } } } } /// <summary> /// Gets the Availibility from the selected checkboxes /// </summary> /// <returns>String in the format of 11,12,13...41,42...31,32...37</returns> public string GetAvailibility() { string selectedText = string.Empty; foreach (CheckBox chk in GetCheckboxes()) { if (chk.IsChecked == true) { selectedText = chk.Tag.ToString() + "," + selectedText; } } return selectedText; }   In my example I am using the matrix format for Day and Time, for example Monday=1, Tuesday=2, Wednesday=3, Thursday = 4, Friday = 5, Saturday = 6, Sunday=7. And Morning = 1, Afternoon =2, Evening = 3. So if I want to represent Morning-Monday I will have to represent it as 11, Afternoon-Tuesday as 22, Morning-Wednesday as 13, etc. And in the other way to set the values in the control I am passing the values in the control in the same format as preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); So this will set the checkbox value for Morning-Monday, Morning-Tuesday, Morning-Wednesday, Morning-Saturday, Afternoon of Tuesday and Afternoon of Wednesday. To implement this control, first I have to import this control in xmlns namespace as xmlns:controls="clr-namespace:PreferredTimeControlApp" and finally put in your page wherever you want, <Grid x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}"> <Border x:Name="ContentBorder" Style="{StaticResource ContentBorderStyle}"> <controls:PreferredTimeControl x:Name="preferredTimeControl"></controls:PreferredTimeControl> </Border> </Grid> And in the code behind you can just include this code: private void InitializeControl() { preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); } And you are ready to go. For more details you can refer to my code attached. I know there can be even simpler and better way to do this. Let me know if any other ideas. Sorry, Guys Still I have used Silverlight 3 and VS2008, as from the system I am uploading this is still not upgraded, but still you can use the same code with Silverlight 4 and VS2010 without any changes. May be just it will ask you to upgrade your project which will take care of rest. Download Source Code.   Thanks ~Brij

  Read the article

• Collision Detection, player correction

  - by DoomStone

  I am having some problems with collision detection, I have 2 types of objects excluding the player. Tiles and what I call MapObjects. The tiles are all 16x16, where the MapObjects can be any size, but in my case they are all 16x16. When my player runs along the mapobjects or tiles, it get verry jaggy. The player is unable to move right, and will get warped forward when moving left. I have found the problem, and that is my collision detection will move the player left/right if colliding the object from the side, and up/down if collision from up/down. Now imagine that my player is sitting on 2 tiles, at (10,12) and (11,12), and the player is mostly standing on the (11,12) tile. The collision detection will first run on then (10,12) tile, it calculates the collision depth, and finds that is is a collision from the side, and therefore move the object to the right. After, it will do the collision detection with (11,12) and it will move the character up. So the player will not fall down, but are unable to move right. And when moving left, the same problem will make the player warp forward. This problem have been bugging me for a few days now, and I just can't find a solution! Here is my code that does the collision detection. public void ApplyObjectCollision(IPhysicsObject obj, List<IComponent> mapObjects, TileMap map) { PhysicsVariables physicsVars = GetPhysicsVariables(); Rectangle bounds = ((IComponent)obj).GetBound(); int leftTile = (int)Math.Floor((float)bounds.Left / map.GetTileSize()); int rightTile = (int)Math.Ceiling(((float)bounds.Right / map.GetTileSize())) - 1; int topTile = (int)Math.Floor((float)bounds.Top / map.GetTileSize()); int bottomTile = (int)Math.Ceiling(((float)bounds.Bottom / map.GetTileSize())) - 1; // Reset flag to search for ground collision. obj.IsOnGround = false; // For each potentially colliding tile, for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { IComponent tile = map.Get(x, y); if (tile != null) { bounds = HandelCollision(obj, tile, bounds, physicsVars); } } } // Handel collision for all Moving objects foreach (IComponent mo in mapObjects) { if (mo == obj) continue; if (mo.GetBound().Intersects(((IComponent)obj).GetBound())) { bounds = HandelCollision(obj, mo, bounds, physicsVars); } } } private Rectangle HandelCollision(IPhysicsObject obj, IComponent objb, Rectangle bounds, PhysicsVaraibales physicsVars) { // If this tile is collidable, SpriteCollision collision = ((IComponent)objb).GetCollisionType(); if (collision != SpriteCollision.Passable) { // Determine collision depth (with direction) and magnitude. Rectangle tileBounds = ((IComponent)objb).GetBound(); Vector2 depth = bounds.GetIntersectionDepth(tileBounds); if (depth != Vector2.Zero) { float absDepthX = Math.Abs(depth.X); float absDepthY = Math.Abs(depth.Y); // Resolve the collision along the shallow axis. if (absDepthY <= absDepthX || collision == SpriteCollision.Platform) { // If we crossed the top of a tile, we are on the ground. if (obj.PreviousBound.Bottom <= tileBounds.Top) obj.IsOnGround = true; // Ignore platforms, unless we are on the ground. if (collision == SpriteCollision.Impassable || obj.IsOnGround) { // Resolve the collision along the Y axis. ((IComponent)obj).Position = new Vector2(((IComponent)obj).Position.X, ((IComponent)obj).Position.Y + depth.Y); // If we hit something about us, remove all velosity upwards if (depth.Y > 0 && obj.IsJumping) { obj.Velocity = new Vector2(obj.Velocity.X, 0); obj.JumpTime = physicsVars.MaxJumpTime; } // Perform further collisions with the new bounds. return ((IComponent)obj).GetBound(); } } else if (collision == SpriteCollision.Impassable) // Ignore platforms. { // Resolve the collision along the X axis. ((IComponent)obj).Position = new Vector2(((IComponent)obj).Position.X + depth.X, ((IComponent)obj).Position.Y); // Perform further collisions with the new bounds. return ((IComponent)obj).GetBound(); } } } return bounds; } Update: I have uploaded the source code, if you want to look that through. I think that my general approach might be wrong when i am working with small tiles, I have also be unable to find any good information on physics and collision detection in Platform games. http://dl.dropbox.com/u/3181816/Sogaard.Games.SuperMario.rar

  Read the article

• Which iso image do I need to install Ubuntu 12.04 on a Macbook Pro so that it boots using UEFI?

  - by gentmatt

  Unlike with earlier releases, the website is unclear on giving a straight recommendation for installing ubuntu on a mac: http://cdimage.ubuntu.com/releases/12.04/release/ I've read several times, that I should use an alternative image. But this is only offered as 64-bit. However, I'm also told to rather use 32-bit images for better software compability. http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-alternate-amd64+mac.iso Even though I should only use alternative images, there is offered a standard desktop image which is "adjusted to work properly on Mac systems". http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-desktop-amd64+mac.iso Question Which image should I take? Do both of these images offer UEFI boot? I've tried both of them already, but both have setup an install with BIOS emulation. This is quite annoying because of the short battery life and high temperatures which are harmful to battery longevity.

  Read the article

• CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

  - by slashdot

  So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

  Read the article

• Server 2003 SP2 BSOD caused by fltmgr.sys

  - by MasterMax1313

  I'm running into a problem where a Server 2003 SP2 box has started crashing roughly once an hour, BSODing out with the message that fltmgr.sys is probably the cause. I ran dumpchk.exe on the memory.dmp file, indicating the same thing. Any thoughts on typical root causes? The following is the error code I'm seeing: Error code 0000007e, parameter1 c0000005, parameter2 f723e087, parameter3 f78cea8c, parameter4 f78ce788. After running dumpchk on the memory.dmp file, I get the following note: Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) The full log is here: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [c:\windows\memory.dmp] Kernel Complete Dump File: Full address space is available Symbol search path is: *** Invalid *** **************************************************************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * **************************************************************************** Executable search path is: ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe - Windows Server 2003 Kernel Version 3790 (Service Pack 2) UP Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_gdr.101019-0340 Machine Name: Kernel base = 0x80800000 PsLoadedModuleList = 0x8089ffa8 Debug session time: Wed Oct 5 08:48:04.803 2011 (UTC - 4:00) System Uptime: 0 days 14:25:12.085 ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe - Loading Kernel Symbols ............................................................... ................................................. Loading User Symbols Loading unloaded module list ... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7E, {c0000005, f723e087, f78dea8c, f78de788} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. *** ERROR: Symbol file could not be found. Defaulted to export symbols for fltmgr.sys - --omitted-- Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) Followup: MachineOwner --------- ----- 32 bit Kernel Full Dump Analysis DUMP_HEADER32: MajorVersion 0000000f MinorVersion 00000ece KdSecondaryVersion 00000000 DirectoryTableBase 004e7000 PfnDataBase 81600000 PsLoadedModuleList 8089ffa8 PsActiveProcessHead 808a61c8 MachineImageType 0000014c NumberProcessors 00000001 BugCheckCode 0000007e BugCheckParameter1 c0000005 BugCheckParameter2 f723e087 BugCheckParameter3 f78dea8c BugCheckParameter4 f78de788 PaeEnabled 00000001 KdDebuggerDataBlock 8088e3e0 SecondaryDataState 00000000 ProductType 00000003 SuiteMask 00000110 Physical Memory Description: Number of runs: 3 (limited to 3) FileOffset Start Address Length 00001000 0000000000001000 0009e000 0009f000 0000000000100000 bfdf0000 bfe8f000 00000000bff00000 00100000 Last Page: 00000000bff8e000 00000000bffff000 KiProcessorBlock at 8089f300 1 KiProcessorBlock entries: ffdff120 Windows Server 2003 Kernel Version 3790 (Service Pack 2) UP Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_gdr.101019-0340 Machine Name:*** ERROR: Module load completed but symbols could not be loaded for srv.sys Kernel base = 0x80800000 PsLoadedModuleList = 0x8089ffa8 Debug session time: Wed Oct 5 08:48:04.803 2011 (UTC - 4:00) System Uptime: 0 days 14:25:12.085 start end module name 80800000 80a50000 nt Tue Oct 19 10:00:49 2010 (4CBDA491) 80a50000 80a6f000 hal Sat Feb 17 00:48:25 2007 (45D69729) b83d4000 b83fe000 Fastfat Sat Feb 17 01:27:55 2007 (45D6A06B) b8476000 b84a1000 RDPWD Sat Feb 17 00:44:38 2007 (45D69646) b8549000 b8554000 TDTCP Sat Feb 17 00:44:32 2007 (45D69640) b8fe1000 b9045000 srv Thu Feb 17 11:58:17 2011 (4D5D53A9) b956d000 b95be000 HTTP Fri Nov 06 07:51:22 2009 (4AF41BCA) b9816000 b982d780 hgfs Tue Aug 12 20:36:54 2008 (48A22CA6) b9b16000 b9b20000 ndisuio Sat Feb 17 00:58:25 2007 (45D69981) b9cf6000 b9d1ac60 iwfsd Wed Sep 29 01:43:59 2004 (415A4B9F) b9e5b000 b9e62000 parvdm Tue Mar 25 03:03:49 2003 (3E7FFF55) b9e63000 b9e67860 lgtosync Fri Sep 12 04:38:13 2003 (3F6185F5) b9ed3000 b9ee8000 Cdfs Sat Feb 17 01:27:08 2007 (45D6A03C) b9f10000 b9f2e000 EraserUtilRebootDrv Thu Jul 07 21:45:11 2011 (4E166127) b9f2e000 b9f8c000 eeCtrl Thu Jul 07 21:45:11 2011 (4E166127) b9f8c000 b9f9d000 Fips Sat Feb 17 01:26:33 2007 (45D6A019) b9f9d000 ba013000 mrxsmb Fri Feb 18 10:22:23 2011 (4D5E8EAF) ba013000 ba043000 rdbss Wed Feb 24 10:54:03 2010 (4B854B9B) ba043000 ba0ad000 SPBBCDrv Mon Dec 14 23:39:00 2009 (4B2712E4) ba0ad000 ba0d7000 afd Thu Feb 10 08:42:18 2011 (4D53EB3A) ba0d7000 ba108000 netbt Sat Feb 17 01:28:57 2007 (45D6A0A9) ba108000 ba19c000 tcpip Sat Aug 15 05:53:38 2009 (4A8685A2) ba19c000 ba1b5000 ipsec Sat Feb 17 01:29:28 2007 (45D6A0C8) ba275000 ba288600 NAVENG Fri Jul 29 08:10:02 2011 (4E32A31A) ba289000 ba2ae000 SYMEVENT Thu Apr 15 21:31:23 2010 (4BC7BDEB) ba2ae000 ba42d300 NAVEX15 Fri Jul 29 08:07:28 2011 (4E32A280) ba42e000 ba479000 SRTSP Fri Mar 04 15:31:08 2011 (4D714C0C) ba485000 ba487b00 dump_vmscsi Wed Apr 11 13:55:32 2007 (461D2114) ba4e1000 ba540000 update Mon May 28 08:15:16 2007 (465AC7D4) ba568000 ba59f000 rdpdr Sat Feb 17 00:51:00 2007 (45D697C4) ba59f000 ba5b1000 raspptp Sat Feb 17 01:29:20 2007 (45D6A0C0) ba5b1000 ba5ca000 ndiswan Sat Feb 17 01:29:22 2007 (45D6A0C2) ba5da000 ba5e4000 dump_diskdump Sat Feb 17 01:07:44 2007 (45D69BB0) ba66a000 ba67e000 rasl2tp Sat Feb 17 01:29:02 2007 (45D6A0AE) ba67e000 ba69a000 VIDEOPRT Sat Feb 17 01:10:30 2007 (45D69C56) ba69a000 ba6c1000 ks Sat Feb 17 01:30:40 2007 (45D6A110) ba6c1000 ba6d5000 redbook Sat Feb 17 01:07:26 2007 (45D69B9E) ba6d5000 ba6ea000 cdrom Sat Feb 17 01:07:48 2007 (45D69BB4) ba6ea000 ba6ff000 serial Sat Feb 17 01:06:46 2007 (45D69B76) ba6ff000 ba717000 parport Sat Feb 17 01:06:42 2007 (45D69B72) ba717000 ba72a000 i8042prt Sat Feb 17 01:30:40 2007 (45D6A110) baff0000 baff3700 CmBatt Sat Feb 17 00:58:51 2007 (45D6999B) bf800000 bf9d3000 win32k Thu Mar 03 08:55:02 2011 (4D6F9DB6) bf9d3000 bf9ea000 dxg Sat Feb 17 01:14:39 2007 (45D69D4F) bf9ea000 bf9fec80 vmx_fb Sat Aug 16 07:23:10 2008 (48A6B89E) bf9ff000 bfa4a000 ATMFD Tue Feb 15 08:19:22 2011 (4D5A7D5A) bff60000 bff7e000 RDPDD Sat Feb 17 09:01:19 2007 (45D70AAF) f7214000 f723a000 KSecDD Mon Jun 15 13:45:11 2009 (4A3688A7) f723a000 f725f000 fltmgr Sat Feb 17 00:51:08 2007 (45D697CC) f725f000 f7272000 CLASSPNP Sat Feb 17 01:28:16 2007 (45D6A080) f7272000 f7283000 symmpi Mon Dec 13 16:03:14 2004 (41BE0392) f7283000 f72a2000 SCSIPORT Sat Feb 17 01:28:41 2007 (45D6A099) f72a2000 f72bf000 atapi Sat Feb 17 01:07:34 2007 (45D69BA6) f72bf000 f72e9000 volsnap Sat Feb 17 01:08:23 2007 (45D69BD7) f72e9000 f7315000 dmio Sat Feb 17 01:10:44 2007 (45D69C64) f7315000 f733c000 ftdisk Sat Feb 17 01:08:05 2007 (45D69BC5) f733c000 f7352000 pci Sat Feb 17 00:59:03 2007 (45D699A7) f7352000 f7386000 ACPI Sat Feb 17 00:58:47 2007 (45D69997) f7487000 f7490000 WMILIB Tue Mar 25 03:13:00 2003 (3E80017C) f7497000 f74a6000 isapnp Sat Feb 17 00:58:57 2007 (45D699A1) f74a7000 f74b4000 PCIIDEX Sat Feb 17 01:07:32 2007 (45D69BA4) f74b7000 f74c7000 MountMgr Sat Feb 17 01:05:35 2007 (45D69B2F) f74c7000 f74d2000 PartMgr Sat Feb 17 01:29:25 2007 (45D6A0C5) f74d7000 f74e7000 disk Sat Feb 17 01:07:51 2007 (45D69BB7) f74e7000 f74f3000 Dfs Sat Feb 17 00:51:17 2007 (45D697D5) f74f7000 f7501000 crcdisk Sat Feb 17 01:09:50 2007 (45D69C2E) f7507000 f7517000 agp440 Sat Feb 17 00:58:53 2007 (45D6999D) f7517000 f7522000 TDI Sat Feb 17 01:01:19 2007 (45D69A2F) f7527000 f7532000 ptilink Sat Feb 17 01:06:38 2007 (45D69B6E) f7537000 f7540000 raspti Sat Feb 17 00:59:23 2007 (45D699BB) f7547000 f7556000 termdd Sat Feb 17 00:44:32 2007 (45D69640) f7557000 f7561000 Dxapi Tue Mar 25 03:06:01 2003 (3E7FFFD9) f7577000 f7580000 mssmbios Sat Feb 17 00:59:12 2007 (45D699B0) f7587000 f7595000 NDProxy Wed Nov 03 09:25:59 2010 (4CD162E7) f75a7000 f75b1000 flpydisk Tue Mar 25 03:04:32 2003 (3E7FFF80) f75b7000 f75c0080 SRTSPX Fri Mar 04 15:31:24 2011 (4D714C1C) f75d7000 f75e3000 vga Sat Feb 17 01:10:30 2007 (45D69C56) f75e7000 f75f2000 Msfs Sat Feb 17 00:50:33 2007 (45D697A9) f75f7000 f7604000 Npfs Sat Feb 17 00:50:36 2007 (45D697AC) f7607000 f7615000 msgpc Sat Feb 17 00:58:37 2007 (45D6998D) f7617000 f7624000 netbios Sat Feb 17 00:58:29 2007 (45D69985) f7627000 f7634000 wanarp Sat Feb 17 00:59:17 2007 (45D699B5) f7637000 f7646000 intelppm Sat Feb 17 00:48:30 2007 (45D6972E) f7647000 f7652000 kbdclass Sat Feb 17 01:05:39 2007 (45D69B33) f7657000 f7661000 mouclass Tue Mar 25 03:03:09 2003 (3E7FFF2D) f7667000 f7671000 serenum Sat Feb 17 01:06:44 2007 (45D69B74) f7677000 f7682000 fdc Sat Feb 17 01:07:16 2007 (45D69B94) f7687000 f7694b00 vmx_svga Sat Aug 16 07:22:07 2008 (48A6B85F) f7697000 f76a0000 watchdog Sat Feb 17 01:11:45 2007 (45D69CA1) f76a7000 f76b0000 ndistapi Sat Feb 17 00:59:19 2007 (45D699B7) f76b7000 f76c6000 raspppoe Sat Feb 17 00:59:23 2007 (45D699BB) f76c8000 f7707000 NDIS Sat Feb 17 01:28:49 2007 (45D6A0A1) f7707000 f770f000 kdcom Tue Mar 25 03:08:00 2003 (3E800050) f770f000 f7717000 BOOTVID Tue Mar 25 03:07:58 2003 (3E80004E) f7717000 f771e000 intelide Sat Feb 17 01:07:32 2007 (45D69BA4) f771f000 f7726000 dmload Tue Mar 25 03:08:08 2003 (3E800058) f777f000 f7786000 dxgthk Tue Mar 25 03:05:52 2003 (3E7FFFD0) f7787000 f778e000 vmmemctl Tue Aug 12 20:37:25 2008 (48A22CC5) f77cf000 f77d6280 vmxnet Mon Sep 08 21:17:10 2008 (48C5CE96) f77d7000 f77df000 audstub Tue Mar 25 03:09:12 2003 (3E800098) f77ef000 f77f7000 Fs_Rec Tue Mar 25 03:08:36 2003 (3E800074) f77f7000 f77fe000 Null Tue Mar 25 03:03:05 2003 (3E7FFF29) f77ff000 f7806000 Beep Tue Mar 25 03:03:04 2003 (3E7FFF28) f7807000 f780f000 mnmdd Tue Mar 25 03:07:53 2003 (3E800049) f780f000 f7817000 RDPCDD Tue Mar 25 03:03:05 2003 (3E7FFF29) f7817000 f781f000 rasacd Tue Mar 25 03:11:50 2003 (3E800136) f7878000 f7897000 Mup Tue Apr 12 15:05:46 2011 (4DA4A28A) f7897000 f7899980 compbatt Sat Feb 17 00:58:51 2007 (45D6999B) f789b000 f789e900 BATTC Sat Feb 17 00:58:46 2007 (45D69996) f789f000 f78a1b00 vmscsi Wed Apr 11 13:55:32 2007 (461D2114) f79af000 f79b0280 vmmouse Mon Aug 11 07:16:51 2008 (48A01FA3) f79b1000 f79b2280 swenum Sat Feb 17 01:05:56 2007 (45D69B44) f7b4a000 f7bdf000 Ntfs Sat Feb 17 01:27:23 2007 (45D6A04B) Unloaded modules: ba65a000 ba668000 imapi.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 0000E000 ba1c4000 ba1d5000 vpc-8042.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00011000 f77df000 f77e7000 Sfloppy.SYS Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00008000 ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7E, {c0000005, f723e087, f78dea8c, f78de788} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. --omitted-- Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) Followup: MachineOwner --------- Finished dump check

  Read the article

• client problems - misaligned expectations & not following SDLC protocols

  - by louism

  hi guys, im having some serious problems with a client on a project - i could use some advice please the short version i have been working with this client now for almost 6 months without any problems (a classified website project in the range of 500 hours) over the last few days things have drastically deteriorated to the point where ive had to place the project on-hold whilst i work-out what to do (this has pissed the client off even more) to be simplistic, the root cause of the issue is this: the client doesnt read the specs i make for him, i code the feature, he than wants to change things, i tell him its not to the agreed spec and that that change will have to be postponed and possibly charged for, he gets upset and rants saying 'hes paid for the feature' and im not keeping to the agreement (<- misalignment of expectations) i think the root cause of the root cause is my clients failure to take my SDLC protocols seriously. i have a bug tracking system in place which he practically refuses to use (he still emails me bugs), he doesnt seem to care to much for the protocols i use for dealing with scope creep and change control the whole situation came to a head recently where he 'cracked it' (an aussie term for being fed-up). the more terms like 'postponed for post-launch implementation', 'costed feature addition', and 'not to agreed spec' i kept using, the worse it got finally, he began to bully me - basically insisting i shut-up and do the work im being paid for. i wrote a long-winded email explaining how wrong he was on all these different points, and explaining what all the SDLC protocols do to protect the success of the project. than i deleted that email and wrote a new one in the new email, i suggested as a solution i write up a list of grievances we both had. we than review the list and compromise on different points: he gets some things he wants, i get some things i want. sometimes youve got to give ground to get ground his response to this suggestion was flat-out refusal, and a restatement that i should just get on with the work ive been paid to do so there you have the very subjective short version. if you have the time and inclination, the long version may be a little less bias as it has the email communiques between me and my client the long version (with background) the long version works by me showing you the email communiques which lead to the situation coming to a head. so here it is, judge for yourself where the trouble started... 1. client asked me why something was missing from a feature i just uploaded, my response was to show him what was in the spec: it basically said the item he was looking for was never going to be included 2. [clients response...] Memo Louis, We are following your own title fields and keeping a consistent layout. Why the big fuss about not adding "Part". It simply replaces "model" and is consistent with your current title fields. 3. [my response...] hi [client], the 'part' field appeared to me as a redundancy / mistake. i requested clarification but never received any in a timely manner (about 2 weeks ago) the specification for this feature also indicated it wasnt going to be included: RE: "Why the big fuss about not adding "Part" " it may not appear so, but it would actually be a lot of work for me to now add a 'Part' field it could take me up to 15-20 minutes to properly explain why its such a big undertaking to do this, but i would prefer to use that time instead to work on completing your v1.1 features as a simplistic explanation - it connects to the change in paradigm from a 'generic classified ad' model to a 'specific attributes for specific categories' model basically, i am saying it is a big fuss, but i understand that it doesnt look that way - after all, it is just one ity-bitty field :) if you require a fuller explanation, please let me know and i will commit the time needed to write that out also, if you recall when we first started on the project, i said that with the effort/time required for features, you would likely not know off the top of your head. you may think something is really complex, but in reality its quite simple, you might think something is easy - but it could actually be a massive trauma to code (which is the case here with the 'Part' field). if you also recalled, i said the best course of action is to just ask, and i would let you know on a case-by-case basis 4. [email from me to client...] hi [client], the online catalogue page is now up live (see my email from a few days ago for information on how it works) note: the window of opportunity for input/revisions on what data the catalogue stores has now closed (as i have put the code up live now) RE: the UI/layout of the online catalogue page you may still do visual/ui tweaks to the page at the moment (this window for input/revisions will close in a couple of days time) 5. [email from client to me...] *(note: i had put up the feature & asked the client to review it, never heard back from them for a few days)* Memo Louis, Here you go again. CLOSED without a word of input from the customer. I don't think so. I will reply tomorrow regarding the content and functionality we require from this feature. 5. [from me to client...] hi [client]: RE: from my understanding, you are saying that the mini-sale yard control would change itself based on the fact someone was viewing for parts & accessories <- is that correct? this change is outside the scope of the v1.1 mini-spec and therefore will need to wait 'til post launch for costing/implementation 6. [email from client to me...] Memo Louis, Following your v1.1 mini-spec and all your time paid in full for the work selected. We need to make the situation clear. There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon. You have undertaken to complete the Parts and accessories feature as follows. Obviously, as part of this process the "mini search" will be effected, and will require "adaption to make sense". 7. [email from me to client...] hi [client], RE: "There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon." a few points to consider: 1) the specification for the 'parts & accessories' feature was as follows: (i.e. [what] "...we have agreed upon.") 2) you have received the 'parts & accessories' feature free of charge (you have paid $0 for it). ive spent two days coding that feature as a gesture of good will i would request that you please consider these two facts carefully and sincerely 8. [email from client to me...] Memo Louis, I don't see how you are giving us anything for free. From your original fee proposal you have deleted more than 30 hours of included features. Your title "shelved features". Further you have charged us twice by adding back into the site, at an addition cost, some of those "shelved features" features. See v1.1 mini-spec. Did include in your original fee proposal a change request budget but then charge without discussion items included in v1.1 mini-spec. Included a further Features test plan for a regression test, a fee of 10 hours that would not have been required if the "shelved features" were not left out of the agreed fee proposal. I have made every attempt to satisfy your your uneven business sense by offering you everything your heart desired, in the v1.1 mini-spec, to be left once again with your attitude of "its too hard, lets leave it for post launch". I am no longer accepting anything less than what we have contracted you to do. That is clearly defined in v1.1 mini-spec, and you are paid in advance for delivering those items as an acceptable function. a few notes about the above email... i had to cull features from the original spec because it didnt fit into the budget. i explained this to the client at the start of the project (he wanted more features than he had budget hours to do them all) nothing has been charged for twice, i didnt charge the client for culled features. im charging him to now do those culled features the draft version of the project schedule included a change request budget of 10 hours, but i had to remove that to meet the budget (the client may not have been aware of this to be fair to them) what the client refers to as my attitude of 'too hard/leave it for post-launch', i called a change request protocol and a method for keeping scope creep under control 9. [email from me to client...] hi [client], RE: "...all your grievances..." i had originally written out a long email response; it was fantastic, it had all these great points of how 'you were wrong' and 'i was right', you would of loved it (and by 'loved it', i mean it would of just infuriated you more) so, i decided to deleted it start over, for two reasons: 1) a long email is being disrespectful of your time (youre a busy businessman with things to do) 2) whos wrong or right gets us no closer to fixing the problems we are experiencing what i propose is this... i prepare a bullet point list of your grievances and my grievances (yes, im unhappy too about how things are going - and it has little to do with money) i submit this list to you for you to add to as necessary we then both take a good hard look at this list, and we decide which areas we are willing to give ground on as an example, the list may look something like this: "louis, you keep taking away features you said you would do" [your grievance 2] [your grievance 3] [your grievance ...] "[client], i feel you dont properly read the specs i prepare for you..." [my grievance 2] [my grievance 3] [my grievance ...] if you are willing to give this a try, let me know will it work? who knows. but if it doesnt, we can always go back to arguing some more :) obviously, this will only work if you are willing to give it a genuine try, and you can accept that you may have to 'give some ground to get some ground' what do you think? 10. [email from client to me ...] Memo Louis, Instead of wasting your time listing grievances, I would prefer you complete the items in v1.1 mini-spec, to a satisfactory conclusion. We almost had the website ready for launch until you brought the v1.1 mini-spec into the frame. Obviously I expected you could complete the v1.1 mini-spec in a two-week time frame as you indicated and give the site a more profession presentation. Most of the problems have been caused by you not following our instructions, but deciding to do what you feel like at the time. And then arguing with us how the missing information is not necessary. For instance "Parts and Accessories". Why on earth would you leave out the parts heading, when it ties-in with the fields you have already developed. It replaces "model" and is just as important in the context of information that appears in the "Details" panel. We are at a stage where the the v1.1 mini-spec needs to be completed without further time wasting and the site is complete (subject to all features working). We are on standby at this end to do just that. Let me know when you are back, working on the site and we will process and complete each v1.1 mini-spec, item by item, until the job is complete. 11. [last email from me to client...] hi [client], based on this reply, and your demonstrated unwillingness to compromise/give any ground on issues at hand, i have decided to place your project on-hold for the moment i will be considering further options on how to over-come our challenges over the next few days i will contact you by monday 17/may to discuss any new options i have come up with, and if i believe it is appropriate to restart work on your project at that point or not told you it was long... what do you think?

  Read the article

• Why is my simple recusive method for this game always off by 1?

  - by FrankTheTank

  I'm attempting to create a text-based version of this game: http://www.cse.nd.edu/java/SameGame.html Here is the code I have so far: #include <iostream> #include <vector> #include <ctime> class Clickomania { public: Clickomania(); std::vector<std::vector<int> > board; int move(int, int); bool isSolved(); void print(); void pushDown(); bool isValid(); }; Clickomania::Clickomania() : board(12, std::vector<int>(8,0)) { srand((unsigned)time(0)); for(int i = 0; i < 12; i++) { for(int j = 0; j < 8; j++) { int color = (rand() % 3) + 1; board[i][j] = color; } } } void Clickomania::pushDown() { for(int i = 0; i < 8; i++) { for(int j = 0; j < 12; j++) { if (board[j][i] == 0) { for(int k = j; k > 0; k--) { board[k][i] = board[k-1][i]; } board[0][i] = 0; } } } } int Clickomania::move(int row, int col) { bool match = false; int totalMatches = 0; if (row > 12 || row < 0 || col > 8 || col < 0) { return 0; } int currentColor = board[row][col]; board[row][col] = 0; if ((row + 1) < 12) { if (board[row+1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row+1, col); } } if ((row - 1) >= 0) { if (board[row-1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row-1, col); } } if ((col + 1) < 8) { if (board[row][col+1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col+1); } } if ((col - 1) >= 0) { if (board[row][col-1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col-1); } } return totalMatches; } void Clickomania::print() { for(int i = 0; i < 12; i++) { for(int j = 0; j < 8; j++) { std::cout << board[i][j]; } std::cout << "\n"; } } int main() { Clickomania game; game.print(); int row; int col; std::cout << "Enter row: "; std::cin >> row; std::cout << "Enter col: "; std::cin >> col; int numDestroyed = game.move(row,col); game.print(); std::cout << "Destroyed: " << numDestroyed << "\n"; } The method that is giving me trouble is my "move" method. This method, given a pair of coordinates, should delete all the squares at that coordinate with the same number and likewise with all the squares with the same number connected to it. If you play the link I gave above you'll see how the deletion works on a click. int Clickomania::move(int row, int col) { bool match = false; int totalMatches = 0; if (row > 12 || row < 0 || col > 8 || col < 0) { return 0; } int currentColor = board[row][col]; board[row][col] = 0; if ((row + 1) < 12) { if (board[row+1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row+1, col); } } if ((row - 1) >= 0) { if (board[row-1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row-1, col); } } if ((col + 1) < 8) { if (board[row][col+1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col+1); } } if ((col - 1) >= 0) { if (board[row][col-1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col-1); } } return totalMatches; } My move() method above works fine, as in, it will delete the appropriate "blocks" and replace them with zeros. However, the number of destroyed (value returned) is always one off (too small). I believe this is because the first call of move() isn't being counted but I don't know how to differentiate between the first call or subsequent calls in that recursive method. How can I modify my move() method so it returns the correct number of destroyed blocks?

  Read the article

• Why is my simple recusive method's final return value always off by 1?

  - by FrankTheTank

  I'm attempting to create a text-based version of this game: http://www.cse.nd.edu/java/SameGame.html Here is the code I have so far: #include <iostream> #include <vector> #include <ctime> class Clickomania { public: Clickomania(); std::vector<std::vector<int> > board; int move(int, int); bool isSolved(); void print(); void pushDown(); bool isValid(); }; Clickomania::Clickomania() : board(12, std::vector<int>(8,0)) { srand((unsigned)time(0)); for(int i = 0; i < 12; i++) { for(int j = 0; j < 8; j++) { int color = (rand() % 3) + 1; board[i][j] = color; } } } void Clickomania::pushDown() { for(int i = 0; i < 8; i++) { for(int j = 0; j < 12; j++) { if (board[j][i] == 0) { for(int k = j; k > 0; k--) { board[k][i] = board[k-1][i]; } board[0][i] = 0; } } } } int Clickomania::move(int row, int col) { bool match = false; int totalMatches = 0; if (row > 12 || row < 0 || col > 8 || col < 0) { return 0; } int currentColor = board[row][col]; board[row][col] = 0; if ((row + 1) < 12) { if (board[row+1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row+1, col); } } if ((row - 1) >= 0) { if (board[row-1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row-1, col); } } if ((col + 1) < 8) { if (board[row][col+1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col+1); } } if ((col - 1) >= 0) { if (board[row][col-1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col-1); } } return totalMatches; } void Clickomania::print() { for(int i = 0; i < 12; i++) { for(int j = 0; j < 8; j++) { std::cout << board[i][j]; } std::cout << "\n"; } } int main() { Clickomania game; game.print(); int row; int col; std::cout << "Enter row: "; std::cin >> row; std::cout << "Enter col: "; std::cin >> col; int numDestroyed = game.move(row,col); game.print(); std::cout << "Destroyed: " << numDestroyed << "\n"; } The method that is giving me trouble is my "move" method. This method, given a pair of coordinates, should delete all the squares at that coordinate with the same number and likewise with all the squares with the same number connected to it. If you play the link I gave above you'll see how the deletion works on a click. int Clickomania::move(int row, int col) { bool match = false; int totalMatches = 0; if (row > 12 || row < 0 || col > 8 || col < 0) { return 0; } int currentColor = board[row][col]; board[row][col] = 0; if ((row + 1) < 12) { if (board[row+1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row+1, col); } } if ((row - 1) >= 0) { if (board[row-1][col] == currentColor) { match = true; totalMatches++; totalMatches += move(row-1, col); } } if ((col + 1) < 8) { if (board[row][col+1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col+1); } } if ((col - 1) >= 0) { if (board[row][col-1] == currentColor) { match = true; totalMatches++; totalMatches += move(row, col-1); } } return totalMatches; } My move() method above works fine, as in, it will delete the appropriate "blocks" and replace them with zeros. However, the number of destroyed (value returned) is always one off (too small). I believe this is because the first call of move() isn't being counted but I don't know how to differentiate between the first call or subsequent calls in that recursive method. How can I modify my move() method so it returns the correct number of destroyed blocks?

  Read the article

• Am I going about this the right way?

  - by Psytronic

  Hey Guys, I'm starting a WPF project, and just finished the base of the UI, it seems very convoluted though, so I'm not sure if I've gone around laying it out in the right way. I don't want to get to start developing the back-end and realise that I've done the front wrong, and make life harder for myself. Coming from a background of <DIV's and CSS to style this is a lot different, and really want to get it right from the start. Essentially it's a one week calendar (7 days, Mon-Sunday, defaulting to the current week.) Which will eventually link up to a DB and if I have an appointment for something on this day it will show it in the relevant day. I've opted for a Grid rather than ListView because of the way it will work I will not be binding the results to a collection or anything along those lines. Rather I will be filling out a Combo box within the canvas for each day (yet to be placed in the code) for each event and on selection it will show me further details. XAML: <Window x:Class="WOW_Widget.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:s="clr-namespace:System;assembly=mscorlib" xmlns:Extensions="clr-namespace:WOW_Widget" DataContext="{Binding RelativeSource={RelativeSource Self}}" Title="Window1" Height="239" Width="831" <Window.Resources <LinearGradientBrush x:Key="NormalBrush" StartPoint="0,0" EndPoint="0,1" <GradientBrush.GradientStops <GradientStopCollection <GradientStop Offset="1.0" Color="White"/ <GradientStop Offset="0.0" Color="LightSlateGray"/ </GradientStopCollection </GradientBrush.GradientStops </LinearGradientBrush <LinearGradientBrush x:Key="grdDayHeader" StartPoint="0,0" EndPoint="0,1" <GradientBrush.GradientStops <GradientStopCollection <GradientStop Offset="0.0" Color="Peru" / <GradientStop Offset="1.0" Color="White" / </GradientStopCollection </GradientBrush.GradientStops </LinearGradientBrush <LinearGradientBrush x:Key="grdToday" StartPoint="0,0" EndPoint="0,1" <GradientBrush.GradientStops <GradientStopCollection <GradientStop Offset="0.0" Color="LimeGreen"/ <GradientStop Offset="1.0" Color="DarkGreen" / </GradientStopCollection </GradientBrush.GradientStops </LinearGradientBrush <Style TargetType="{x:Type GridViewColumnHeader}" <Setter Property="Background" Value="Khaki" / </Style <Style x:Key="DayHeader" TargetType="{x:Type Label}" <Setter Property="Background" Value="{StaticResource grdDayHeader}" / <Setter Property="Width" Value="111" / <Setter Property="Height" Value="25" / <Setter Property="HorizontalContentAlignment" Value="Center" / </Style <Style x:Key="DayField" <Setter Property="Canvas.Width" Value="111" / <Setter Property="Canvas.Height" Value="60" / <Setter Property="Canvas.Background" Value="White" / </Style <Style x:Key="Today" <Setter Property="Canvas.Background" Value="{StaticResource grdToday}" / </Style <Style x:Key="CalendarColSpacer" <Setter Property="Canvas.Width" Value="1" / <Setter Property="Canvas.Background" Value="Black" / </Style <Style x:Key="CalendarRowSpacer" <Setter Property="Canvas.Height" Value="1" / <Setter Property="Canvas.Background" Value="Black" / </Style </Window.Resources <Grid Background="{StaticResource NormalBrush}" <Border BorderBrush="Black" BorderThickness="1" Width="785" Height="86" Margin="12,12,12,104" <Canvas Height="86" Width="785" VerticalAlignment="Top" <Grid <Grid.ColumnDefinitions <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / </Grid.ColumnDefinitions <Grid.RowDefinitions <RowDefinition / <RowDefinition / <RowDefinition / </Grid.RowDefinitions <Label Grid.Column="0" Grid.Row="0" Content="Monday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="1" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="2" Grid.Row="0" Content="Tuesday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="3" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="4" Grid.Row="0" Content="Wednesday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="5" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="6" Grid.Row="0" Content="Thursday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="7" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="8" Grid.Row="0" Content="Friday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="9" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="10" Grid.Row="0" Content="Saturday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="11" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="12" Grid.Row="0" Content="Sunday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="0" Grid.ColumnSpan="13" Grid.Row="1" Style="{StaticResource CalendarRowSpacer}" / <Canvas Grid.Column="0" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblMondayDate" / </Canvas <Canvas Grid.Column="2" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblTuesdayDate" / </Canvas <Canvas Grid.Column="4" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblWednesdayDate" / </Canvas <Canvas Grid.Column="6" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblThursdayDate" / </Canvas <Canvas Grid.Column="8" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblFridayDate" / </Canvas <Canvas Grid.Column="10" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblSaturdayDate" / </Canvas <Canvas Grid.Column="12" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblSundayDate" / </Canvas </Grid </Canvas </Border <Canvas Height="86" HorizontalAlignment="Right" Margin="0,0,12,12" Name="canvas1" VerticalAlignment="Bottom" Width="198"</Canvas </Grid </Window CS: public partial class Window1 : Window { private DateTime today = new DateTime(); private Label[] Dates = new Label[7]; public Window1() { DateTime start = today = DateTime.Now; int day = (int)today.DayOfWeek; while (day != 1) { start = start.Subtract(new TimeSpan(1, 0, 0, 0)); day--; } InitializeComponent(); Dates[0] = lblMondayDate; Dates[1] = lblTuesdayDate; Dates[2] = lblWednesdayDate; Dates[3] = lblThursdayDate; Dates[4] = lblFridayDate; Dates[5] = lblSaturdayDate; Dates[6] = lblSundayDate; FillWeek(start); } private void FillWeek(DateTime start) { for (int d = 0; d < Dates.Length; d++) { TimeSpan td = new TimeSpan(d, 0, 0, 0); DateTime _day = start.Add(td); if (_day.Date == today.Date) { Canvas dayCanvas = (Canvas)Dates[d].Parent; dayCanvas.Style = (Style)this.Resources["Today"]; } Dates[d].Content = (int)start.Add(td).Day; } } } Thanks for any tips you guys can give Psytronic

  Read the article

• Giving an Error Object Expected Line 48 Char 1

  - by Leslie Peer

  Giving an Error Object Expected Line 48 Char 1------What did I do wrong??? *Note Line # are for reference only not on Original Web page****** <HTML><HEAD><TITLE></TITLE> <META http-equiv=Content-Type content="text/html; charset=utf-8"> <META content="Leslie Peer" name=author> <META content="Created with Trellian WebPage" name=description> <META content="MSHTML 6.00.6000.16809" name=GENERATOR> <META content=Index name=keywords> <STYLE type=text/css>BODY { COLOR: #000000; BACKGROUND-REPEAT: repeat; FONT-FAMILY: Accent SF, Arial, Arial Black, Arial Narrow, Century Gothic, Comic Sans MS, Courier, Courier New, Georgia, Microsoft Sans Serif, Monotype Corsiva, Symbol, Tahoma, Times New Roman; BACKGROUND-COLOR: #666666 } A { FONT-SIZE: 14px; FONT-FAMILY: Arial Black, Bookman Old Style, DnD4Attack, Lucida Console, MS Serif, MS Outlook, MS Sans Serif, Rockwell Extra Bold, Roman, Star Time JL, Tahoma, Terminal, Times New Roman, Verdana, Wingdings 2, Wingdings 3, Wingdings } A:link { COLOR: #9966cc; TEXT-DECORATION: underline } A:visited { COLOR: #66ff66; TEXT-DECORATION: underline } A:hover { COLOR: #ffff00; TEXT-DECORATION: underline } A:active { COLOR: #ff0033; TEXT-DECORATION: underline } H1 { FONT-SIZE: 25px; COLOR: #9966cc; FONT-FAMILY: Century Gothic } H2 { FONT-SIZE: 20px; COLOR: #ff33cc; FONT-FAMILY: Century Gothic } H3 { FONT-SIZE: 18px; COLOR: #6666cc; FONT-FAMILY: Century Gothic } H4 { FONT-SIZE: 15px; COLOR: #00cc33; FONT-FAMILY: Century Gothic } H5 { FONT-SIZE: 10px; COLOR: #ffff33; FONT-FAMILY: Century Gothic } H6 { FONT-SIZE: 5px; COLOR: #996666; FONT-FAMILY: Century Gothic } </STYLE> line 46-<SCRIPT> line 47- CharNum=6; line 48-var Character=newArray();Character[0]="Larry Lightfoot";Character[1]="Sam Wrightfield";Character[2]="Gavin Hartfild";Character[3]="Gail Quickfoot";Character[4]="Robert Gragorian";Character[5]="Peter Shain"; line 49-var ExChar=newArray();ExChar[0]="Tabor Bloomfield"; line 50-var Class=newArray();Class[0]="MagicUser";Class[1]="Fighter";Class[2]="Fighter";Class[3]="Thief";Class[4]="Cleric";Class[5]="Fighter"; line 51-line 47var ExClass=newArray();ExClass[0]="MagicUser"; line 52-var Level=newArray();Level[0]="2";Level[1]="1";Level[2]="1";Level[3]="2";Level[4]="2";Level[5]="1"; line 53-var ExLevel=newArray();ExLevel[0]="23"; line 54-var Hpts=newArray();Hpts[0]="6";Hpts[1]="14";Hpts[2]="13";Hpts[3]="8";Hpts[4]="12";Hpts[5]="15"; line 55-var ExHpts=newArray();ExHpts[0]="145"; line 56-var Armor=newArray();Armor[0]="Cloak";Armor[1]="Splinted Armor";Armor[2]="Chain Armor";Armor[3]="Leather Armor";Armor[4]="Chain Armor";Armor[5]="Splinted Armor"; line 57-var ExArmor=newArray();ExArmor[0]="Robe of Protection +5"; line 58-var Ac1=newArray();Ac1[0]="0";Ac1[1]="3";Ac1[2]="3";Ac1[3]="4";Ac1[4]="2";Ac1[5]="3"; line 59-var ExAc=newArray();ExAc[0]="5"; line 60-var Armor1b=newArray();Armor1b[0]="Ring of Protection +1";Armor1b[1]="Small Shield";Armor1b[2]="Small Shield";Armor1b[3]="Wooden Shield";Armor1b[4]="Large Shield";Armor1b[5]="Small Shield"; line 61-var ExArmor1b=newArray();ExArmor1b[0]="Ring of Protection +5"; line 62-var Ac2=newArray();Ac2[0]="1";Ac2[1]="1";Ac2[2]="1";Ac2[3]="1";Ac2[4]="1";Ac2[5]="1"; line 63-var ExAc1b=newArray();ExAc1b[0]="5" line 64-var Str=newArray();Str[0]="15";Str[1]="16";Str[2]="14";Str[3]="13";Str[4]="14";Str[5]="13"; line 65-var ExStr=newArray();ExStr[0]=21; line 66-var Int=newArray();Int[0]="17";Int[1]="11";Int[2]="12";Int[3]="13";Int[4]="14";Int[5]="13"; line 67-var ExInt=newArray();ExInt[0]="19"; line 68-var Wis=newArray();Wis[0]="17";Wis[1]="12";Wis[2]="14";Wis[3]="13";Wis[4]="14";Wis[5]="12"; line 69-var ExWis=newArray();ExWis[0]="18"; line 70-var Dex=newArray();Dex[0]="15";Dex[1]="14";Dex[2]="13";Dex[3]="15";Dex[4]="14";Dex[5]="12"; line 71-var ExDex=newArray();ExDex[0]="19"; line 72-var Con=newArray();Con[0]="16";Con[1]="15";Con[2]="16";Con[3]="13";Con[4]="12";Con[5]="10"; line 73-var ExCon=newArray();ExCon[0]="19"; line 74-var Chr=newArray();Chr[0]="16";Chr[1]="14";Chr[2]="13";Chr[3]="12";Chr[4]="14";Chr[5]="13"; line 75-var ExChr=newArray();ExChr[0]="21"; line 76-var Expt=newArray();Expt[0]="45";Expt[1]="21";Expt[2]="16";Expt[3]="18";Expt[4]="22";Expt[5]="34"; line 77-var ExExpt=newArray();ExExpt[0]="245678"; line 78-var ExBp=newArray();ExBp[0]="Unknown";ExBp[1]="Extrademensional Plane World of Amborsia";ExBp[2]="Evil Wizard Banished for Mass Geniocodes"; line 79-</SCRIPT> line 80-</HEAD> line 81-<BODY> Giving an Error Object Expected Line 48 Char 1------What did I do wrong??? *Note Line # are for reference only not on Original Web page******

  Read the article

• Oracle SQL: ROLLUP not summing correctly

  - by tommy-o-dell

  Hi guys, Rollup seems to be working correcly to count the number of units, but not the number of trains. Any idea what could be causing that? The output from the query looks like this. The sum of the Units column in yellow is 53 but the rollup is showing 51. The number of units adds up correctly though... And here's the oracle SQL query... select t.year, t.week, decode(t.mine_id,NULL,'PF',t.mine_id) as mine_id, decode(t.product,Null,'LF',t.product) as product, decode(t.mine_id||'-'||t.product,'-','PF',t.mine_id||'-'||t.product) as code, count(distinct t.tpps_train_id) as trains, count(1) as units from ( select trn.mine_code as mine_id, trn.train_tpps_id as tpps_train_id, round((con.calibrated_weight_total - con.empty_weight_total),2) as tonnes from widsys.train trn INNER JOIN widsys.consist con USING (train_record_id) where trn.direction = 'N' and (con.calibrated_weight_total-con.empty_weight_total) > 10 and trn.num_cars > 10 and con.consist_no not like '_L%' ) w, ( select to_char(td.datetime_act_comp_dump-7/24, 'IYYY') as year, to_char(td.datetime_act_comp_dump-7/24, 'IW') as week, td.mine_code as mine_id, td.train_id as tpps_train_id, pt.product_type_code as product from tpps.train_details td inner join tpps.ore_products op using (ore_product_key) inner join tpps.product_types pt using (product_type_key) where to_char(td.datetime_act_comp_dump-7/24, 'IYYY') = 2010 and to_char(td.datetime_act_comp_dump-7/24, 'IW') = 12 order by td.datetime_act_comp_dump asc ) t where w.mine_id = t.mine_id and w.tpps_train_id = t.tpps_train_id having t.product is not null or t.mine_id is null group by t.year, t.week, rollup( t.mine_id, t.product)

  Read the article

• Can't add client machine to windows server 2008 domain controller

  - by Patrick J Collins

  A bit of background before I dive into the gritty details: I have a single server running Windows 2003 Server where I host my ASP.net website and SQL Server + Reports. I've been creating ordinary windows user accounts to authenticate my users, and I enabled integrated windows authentication with impersonation. I've set up a bunch of user groups which correspond to certain roles (admin, power user, normal user, etc) and I test membership to enable or disable certain features. Overall, I'm pretty happy with the solution, it was quick to setup and I don't have to worry about messing around storing passwords and whatnot. Well, what I'm trying to do now is set up a new environment with 3 servers (Web, SQL, Reports) and I'd like these three servers to share common user accounts. I understand that I could add these three machines to a domain, which means installing Active Directory on one of the machines. I am barking up the wrong tree here? Would you suggest an alternative configuration? Assuming that I stick with AD, I have a couple of questions regarding DNS. To be honest, I'd rather not fiddle around with the DNS settings because my ISP already has their own DNS server which works just fine. It would appear however that DNS and AD are intertwined. Firstly, if I am to create a new domain in called mycompany.net, do I actually need to be the registered owner of that domain name and ensure the DNS entry points to the IP address of the machine hosting AD? Secondly, for the two other machines that I am trying to add to the domain, do I need to fiddle with their DNS settings? I've tried setting the preferred DNS Server IP address to that of my newly installed AD, but no luck. At this point, I can't add the two other machines to the domain. Here are some diagnostics that I have run based on a few suggestions I read on forums (sorry they're in French, although I could translate if needed). I ran nltest, which seems to indicate that the client can discover the domain controller. When I run dcdiag, the call to DsGetDcName fails with error 1722, not really sure what that means. Any suggestions? Thanks! C:\Users\Administrator>nltest /dsgetdc:mycompany.net Contrôleur de domaine : \\REPORTS.mycompany.net Adresse : \\111.111.111.111 GUID dom : 3333a4ec-ca56-4f02-bb9e-76c29c6c3832 Nom dom : mycompany.net Nom de la forêt : mycompany.net Nom de site du contrôleur de domaine : Default-First-Site-Name Nom de notre site : Default-First-Site-Name Indicateurs : PDC GC DS LDAP KDC TIMESERV WRITABLE DNS_DC DNS_DOMAIN DNS _FOREST CLOSE_SITE FULL_SECRET La commande a été correctement exécutée C:\Users\Administrator>dcdiag /s:mycompany.net /u: mycompany.net \pcollins /p:somepass Diagnostic du serveur d'annuaire Exécution de l'installation initiale : * Forêt AD identifiée. Collecte des informations initiales terminée. Exécution des tests initiaux nécessaires Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Connectivity ......................... Le test Connectivity de REPORTS a réussi Exécution des tests principaux Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Advertising Erreur irrécupérable : l'appel DsGetDcName (REPORTS) a échoué ; erreur 1722 Le localisateur n'a pas pu trouver le serveur. ......................... Le test Advertising de REPORTS a échoué Démarrage du test : FrsEvent Impossible d'interroger le journal des événements File Replication Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test FrsEvent de REPORTS a échoué Démarrage du test : DFSREvent Impossible d'interroger le journal des événements DFS Replication sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test DFSREvent de REPORTS a échoué Démarrage du test : SysVolCheck [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test SysVolCheck de REPORTS a échoué Démarrage du test : KccEvent Impossible d'interroger le journal des événements Directory Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test KccEvent de REPORTS a échoué Démarrage du test : KnowsOfRoleHolders ......................... Le test KnowsOfRoleHolders de REPORTS a réussi Démarrage du test : MachineAccount Impossible d'ouvrir le canal avec [REPORTS] : échec avec l'erreur 53 : Le chemin réseau n'a pas été trouvé. Impossible d'obtenir le nom de domaine NetBIOS Échec : impossible de tester le nom principal de service (SPN) HOST Échec : impossible de tester le nom principal de service (SPN) HOST ......................... Le test MachineAccount de REPORTS a réussi Démarrage du test : NCSecDesc ......................... Le test NCSecDesc de REPORTS a réussi Démarrage du test : NetLogons [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test NetLogons de REPORTS a échoué Démarrage du test : ObjectsReplicated ......................... Le test ObjectsReplicated de REPORTS a réussi Démarrage du test : Replications ......................... Le test Replications de REPORTS a réussi Démarrage du test : RidManager ......................... Le test RidManager de REPORTS a réussi Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.mycompany.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué Démarrage du test : SystemLog Impossible d'interroger le journal des événements System sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test SystemLog de REPORTS a échoué Démarrage du test : VerifyReferences ......................... Le test VerifyReferences de REPORTS a réussi Exécution de tests de partitions sur ForestDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de ForestDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de ForestDnsZones a réussi Exécution de tests de partitions sur DomainDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de DomainDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de DomainDnsZones a réussi Exécution de tests de partitions sur Schema Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Schema a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Schema a réussi Exécution de tests de partitions sur Configuration Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Configuration a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Configuration a réussi Exécution de tests de partitions sur mycompany Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de mycompany a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de mycompany a réussi Exécution de tests d'entreprise sur mycompany.net Démarrage du test : LocatorCheck Avertissement : l'appel DcGetDcName(GC_SERVER_REQUIRED) a échoué ; erreur 1722 Serveur de catalogue global introuvable - Les catalogues globaux ne fonctionnent pas. Avertissement : l'appel DcGetDcName(PDC_REQUIRED) a échoué ; erreur 1722 Contrôleur principal de domaine introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(TIME_SERVER) a échoué ; erreur 1722 Serveur de temps introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(GOOD_TIME_SERVER_PREFERRED) a échoué ; erreur 1722 Serveur de temps introuvable. Avertissement : l'appel DcGetDcName(KDC_REQUIRED) a échoué ; erreur 1722 Centre de distribution de clés introuvable : les centres de distribution de clés ne fonctionnent pas. ......................... Le test LocatorCheck de mycompany.net a échoué Démarrage du test : Intersite ......................... Le test Intersite de mycompany.net a réussi Update 1 : I am under the distinct impression that the problem is caused by some security settings. I have read elsewhere that the client needs to be able to access the fileshare sysvol. I had to enable Client for Microsoft Windows and File and Printer Sharing which were previously disabled. When I now run dcdiag the Advertising test works, which I suppose is forward progress. It currently chokes on the Services step (unable to open remote IPC). Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.locbus.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué The original English version of that error message : Could not open Remote ipc to [server] Update 2 : I attach some more diagnostics : Netsetup.log (client): 09/24/2009 13:27:09:773 ----------------------------------------------------------------- 09/24/2009 13:27:09:773 NetpValidateName: checking to see if 'WEB' is valid as type 1 name 09/24/2009 13:27:12:773 NetpCheckNetBiosNameNotInUse for 'WEB' [MACHINE] returned 0x0 09/24/2009 13:27:12:773 NetpValidateName: name 'WEB' is valid for type 1 09/24/2009 13:27:12:805 ----------------------------------------------------------------- 09/24/2009 13:27:12:805 NetpValidateName: checking to see if 'WEB' is valid as type 5 name 09/24/2009 13:27:12:805 NetpValidateName: name 'WEB' is valid for type 5 09/24/2009 13:27:12:852 ----------------------------------------------------------------- 09/24/2009 13:27:12:852 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:12:992 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:12:992 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:320 ----------------------------------------------------------------- 09/24/2009 13:27:21:320 NetpDoDomainJoin 09/24/2009 13:27:21:320 NetpMachineValidToJoin: 'WEB' 09/24/2009 13:27:21:320 OS Version: 6.0 09/24/2009 13:27:21:320 Build number: 6002 09/24/2009 13:27:21:320 ServicePack: Service Pack 2 09/24/2009 13:27:21:414 SKU: Windows Server® 2008 Standard 09/24/2009 13:27:21:414 NetpDomainJoinLicensingCheck: ulLicenseValue=1, Status: 0x0 09/24/2009 13:27:21:414 NetpGetLsaPrimaryDomain: status: 0x0 09/24/2009 13:27:21:414 NetpMachineValidToJoin: status: 0x0 09/24/2009 13:27:21:414 NetpJoinDomain 09/24/2009 13:27:21:414 Machine: WEB 09/24/2009 13:27:21:414 Domain: MYCOMPANY.NET 09/24/2009 13:27:21:414 MachineAccountOU: (NULL) 09/24/2009 13:27:21:414 Account: MYCOMPANY.NET\pcollins 09/24/2009 13:27:21:414 Options: 0x25 09/24/2009 13:27:21:414 NetpLoadParameters: loading registry parameters... 09/24/2009 13:27:21:414 NetpLoadParameters: DNSNameResolutionRequired not found, defaulting to '1' 0x2 09/24/2009 13:27:21:414 NetpLoadParameters: status: 0x2 09/24/2009 13:27:21:414 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:21:523 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:21:523 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:523 NetpDsGetDcName: trying to find DC in domain 'MYCOMPANY.NET', flags: 0x40001010 09/24/2009 13:27:22:039 NetpDsGetDcName: failed to find a DC having account 'WEB$': 0x525, last error is 0x79 09/24/2009 13:27:22:039 NetpDsGetDcName: status of verifying DNS A record name resolution for 'KING.MYCOMPANY.NET': 0x0 09/24/2009 13:27:22:039 NetpDsGetDcName: found DC '\\KING.MYCOMPANY.NET' in the specified domain 09/24/2009 13:27:30:039 NetUseAdd to \\KING.MYCOMPANY.NET\IPC$ returned 53 09/24/2009 13:27:30:039 NetpJoinDomain: status of connecting to dc '\\KING.MYCOMPANY.NET': 0x35 09/24/2009 13:27:30:039 NetpDoDomainJoin: status: 0x35 09/24/2009 13:27:30:148 ----------------------------------------------------------------- ipconfig /all (on client): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : WEB Suffixe DNS principal . . . . . . : Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-17-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.122(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : **.***.163.123 NetBIOS sur Tcpip. . . . . . . . . . . : Activé ipconfig /all (on server): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : KING Suffixe DNS principal . . . . . . : mycompany.net Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Liste de recherche du suffixe DNS.: locbus.net Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-1E-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.123(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : 127.0.0.1 NetBIOS sur Tcpip. . . . . . . . . . . : Activé nslookup (on client): Serveur : *******.***.com Address: **.***.163.123 Nom : mycompany.net Addresses: ****:****:a37b::****:a37b **.****.163.123

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >