Search Results

Search found 4070 results on 163 pages for 'intel centrino'.

Page 109/163 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Windows Experience Index could not be computed

  - by Alexey Ivanov

  I've upgraded recently from Windows Vista to Windows 8. When I try to rate my computer, it accesses DirectX 9 performance, then processes to DirectX 10 tests: And it gets stuck at this point. In 5–10 minutes, it shows error message: The video card is rather old: Mobile Intel 965 Express Chipset Family. I'm pretty sure it does not support DirectX 10. Why does Windows assess it with DirectX 10? And how can I make it skip DirectX 10 tests and get the system rating? The driver was installed automatically by Windows 8 from Windows Update. Version: 8.15.10.2697 Date: 10/01/2012

  Read the article

• Super-silent (mid tower) case and fan combo

  - by Dennis G.

  I want to build a HTPC for music/video/blu-ray playback (no gaming). I don't need an expensive HTPC case but just want to go with a standard medium tower case. However, I want it to be super silent so it doesn't make any annoying fan/disk noises when I watch movies. Ideally, it shouldn't make any noticeable noise at all. I understand that choosing a board, CPU and graphic card that run cool and don't consume a lot of power is important for designing a quiet machine, and I think I got that covered. However, there are so many choices in regards to cases, fans and power supplies that it's hard to get started. What are your recommendations for a case/fan (cpu+case)/power supply combination that run absolutely silent and can cool a standard Intel system with a low-power (possibly passively cooled) graphic card? I'm usually a fan of Antec cases, would an Antec Mini P180 be a good starting point? If so, which case fans, CPU fan and power supply would you recommend?

  Read the article

• Does upgrading RAM causes increase in Graphic card's share?

  - by A.S.

  I have asked this question on Ask Ubuntu, and I was suggested to Upgrade RAM from most voted answers. But I got a point about my graphics card. Since, I can upgrade RAM and not graphics card, Does upgrading RAM also cause graphics memory to increase. To clear the point: My specs are given below: Laptop : Lenovo 3000 Y410. (bought in 2008 October) RAM: 1 GB (DDR2) External Graphics (Dedicated): N/A Internal Graphics (Shared): 256 MB Graphics Chipset: Intel GMA X3100 My Question is: If I increase my RAM to 3 GB, will it increase graphics cards share of the Memory. In other word, If graphics card shares 256 MB in 1GB RAM, will it share more, when I upgrade the RAM into 2GB or more ? Authentic resource link will be much appreciated I have recently known that, My chipset GMA X3100 can address 384 MB of RAM. So the question.

  Read the article

• Chrome pegs CPU playing YouTube videos

  - by AngryHacker

  I am not sure when this started, but the issue definitely exists in the latest version of Chrome (10.0.648.127). Playing youtube video at 320p essentially pegs the CPU. The process that kills is WindowServer which takes up the lion's share of the CPU. When I close the tab, everything goes back to normal. If I try this in Safari or Firefox, CPU usage is within acceptable levels. I am on a 2-3 year old MacMini, which is not the latest, but runs most apps fine. 1.83Mhz Intel Core 2 Duo. Is there a setting within Chrome I can set to fix this issue?

  Read the article

• How to diagnose repeated freezing of windows 7 (comes back alive in few seconds)

  - by Akash Kava

  I installed Windows 7 in a 3 year old machine, it installed successfully, took all drivers and running great, but what happens is every 5-6 minutes it freezes for few seconds... 30 seconds to 1 minute and then comes back alive. I checked Event Viewer, nothing matching the frozen timeline. I would appriciate any help on how to detect causing service/hardware. After it comes alive, everything runs normal, I did run task manager and checked cpu usage, at time it freezes just before and after that no task took more cpu or memory, it was like idle machine. No external usb drives or no devices, on board intel desktop board with SATA HDD, SATA hdd running in absolute good mode.

  Read the article

• What are the best options for a root filesystem hosted on SSD under Linux

  - by stsquad

  I'm working on an embedded system which is going to be booting and hosting it's rootfs on an SSD disk. We are currently looking at using Intel X-18M SSDs. The file system structure will have a fairly static /usr section (modulo software upgrades) and an active /var and /var/log for maintaining state and logging. Given the wear-levelling done by the underlying flash does having separate partitions help or hinder? As modern SSDs appear as straight block devices and hide their mapping magic behind their firmware is there any point trying to optimise the choice of file-system that sits on-top of the SSD? Finally does enable SMART monitoring make any sense in this context or are their SSD specific ways of determining the underlying health of the storage hardware?

  Read the article

• Wrong PC-projector resolution in Windows 7

  - by peter.olsson

  I'm connecting a PC-projector (Benq MP721) to a Windows 7 Professional laptop (HP 6730b). All the output settings on the laptop, including the laptop screen, changes to 1024x768 (which the projector supports). However the projector says it receives 1360x768 and asks me to change the resolution to 1024x768. I'm using mirrored display. The laptop is 1024x768 The screen resolution in the control panel says 1024x768 The Intel graphics card utilities says 1024x768 The driver for the projector is a Generic PnP Monitor Is there anything in Windows 7 that would convert my 4:3 resolution to wide screen automatically?

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• Vista: Improving troubleshoot approach skills

  - by Chau

  I'm not a Windows SuperUser, but neither just the regular user. I don't mind browsing the Registry, using Process Explorer, reading the Event logs, (un)installing new drivers and so on, but all this only makes me solve some problems. I tend though to run into problems where these tools aren't enough. Which tools should I learn about to improve my troubleshooting skills in Windows? Currently I'm using Windows Vista x64 (not moved to 7 yet), facing audio/video stuttering problems and I think this is a good place to improve my troubleshooting skills. I know this post is similar to this question, but my machine is only hanging occationally. Specs: Intel Q6600 Stock speed ASUS P5QD Turbo 4GB ram NVIDIA GTS-8800 640 HDA Xplosion 7.1 Seasonic 430W Windows Vista Business x64

  Read the article

• CPU fan making noise

  - by superb1

  CPU fan is making noise. I figured out some reasons: Cable coming out of fan is vibrating. And maybe also CPU fan is loose causing vibration. Suggest options. I cleaned the fan. But found that there is no heatsink compound /paste between processor and the fan. Is it OK? My processor is P4 2.4 GHz. Motherboard Intel 845 GVSR.

  Read the article

• How to install network drivers during installation?

  - by Matt

  I have a server that I'm attempting to install windows onto. However, the disk is an iscsi target provided by ipxe. Everything appears to go well until about 3/4 through the install process I get an error about a critical driver missing and the installation is cancelled. I would say the critical driver would be the network card. It's an intel nic and the drivers are not on the windows installation CD. I tried slipstreaming them with RTSevenLite, but after it created the CD it seems it failed to make it bootable. I've also not been successful in making a bootable USB thumb drive or USB HDD. I suspect a buggy bios even though I have the latest. How to install network drivers during installation? Windows used to provide an optional F6 during install feature but this seems to be missing in Windows Servert 2008. Perhaps there is a way to do this, or another method?

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Random flickering on 2.6.32 kernels after suspend

  - by whitequark

  I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

  Read the article

• What was your most expensive computer rig?

  - by AlbertoPL

  I'm curious as to how much people are willing to spend on a typical computer. My most expensive machine is a gaming rig complete with an ATI Radeon HD4850, Wolfdale 3.0 GHZ Intel Core 2 Duo, 500 Gb hard drive, Antec 900 computer case, the works. I also have a 2-monitor set up. I'd have to say this thing has cost me a little more than a grand at this point, and I'd put the total value of the components at roughly $1300. So, how far have you gone with your computer rigs and has it been worth it?

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• Improve performance of bind9 service restart

  - by Jakob

  Hi, I'm setting up a name server hosting DNS for a large number of domains, 50,000 - 100,000 domains. I will be using Bind9 and the service will need to be restarted several times a day. I have made some tests and it seems that restart of the Bind9 service scales very poorly with the number of domains. #domains | restart time ----------------------- 10,000 | 3.1 sec 25,000 | 8.9 sec 50,000 | 50 sec 100,000 | 7:50 min Is there some way to speedup the restart of the service? I have noticed that restart only utilizes one core, is there some way for it to use more cores? The Bind9 version is 9.7.1-P2 with default configuration. The server running Bind9 is a Intel Core 2 Due 2.93 GHz with 4 GB memory and Ubuntu Server 10.10. Any help will be appreciated. Jakob

  Read the article

• Create a CDROM Bootdisk to update BIOS

  - by osij2is

  So, I have a Tyan Opteron board with a very old BIOS version. I realize Opteron's aren't exactly common like Athlons, Phenoms, Intel CPUs, etc. but my question revolves around updating the BIOS, however I don't have a floppy drive and there's no option to boot off of a USB key. Tyan has incomplete instructions on their website (link) on how to flash the BIOS via USB. So my second tactic has been to create a Windows 98 boot-able CDROM with the flash utilities on it. It's been years since I've made one but after going to sites like bootdisk.com and such I haven't had any success. Can anyone tell me step-by-step how to make a boot-able Windows 98 CDROM? I can't believe I'm having such a hard time doing this but I've failed on four different attempts and I must be doing something wrong or I'm not accounting for something.

  Read the article

• Safari 5 fails to install on my Mac

  - by Amairani409

  I just got the new Safari 5.0 I downloaded because my Mac told me there was a new version that I should be getting. But when I try to run this new version of the application -- nothing happens! I mean the program seems to be working but nothing appears on the screen and so when I try to see my top sites a little window shows up but it just doesn't show anything. Then 3 seconds later the program shuts down! I don't know why this is happening; ideas? Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• Multi-monitor setup: one widescreen monitor, one regular (4:3) monitor; is this usually possible?

  - by stakx

  I'm trying to find out whether it's generally possible to have a multi-monitor setup with both a widescreen monitor and a regular monitor (ie. one with a 4:3 picture ratio). I'd like to run them in Extended Desktop mode on a Windows Vista machine. The computer is a Dell notebook with an onboard Intel GMA 4500MHD graphics chipset. While I know that this notebook is capable of driving multiple monitors, I don't know if it is also able to drive monitors with varying resolutions. Does anyone know if differing screen resolutions is generally a problem?

  Read the article

• Computer becomes very slow (permanently) after running a bunch of apps

  - by djzmo

  Hello there, My computer with Windows XP installed becomes very slow after I ran some heavy tasks at a time. (play a full 3D online game while extracting a 4GB RAR archive) It freezes for about 200~500ms every few seconds, and this always happens if I do heavy tasks at once in my computer (for example, installing a program while playing games), and the lag remains permanently (even a reboot won't make it better) unless I repair-install the Windows. Since I have a low-end computer: Intel(R) Pentium(R) 4 CPU 2.00 GHz, 512 MB of RAM ATI RADEON 9550 AGP 256 MB And the only way I used everytime to fix this problem is by repair-installing my Windows XP. So that I won't lose any data or installed programs. But I believe there's a better and faster way to fix this without repair-installing the Windows. Any idea?

  Read the article

• Building a new PC, Installing XP, blue screen of death

  - by Tim

  I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

  Read the article

• How to avoid Memory "Hard Fault/sec"

  - by Flavio Oliveira

  i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

  Read the article

• ARM laptop available?

  - by Ken

  Hearing all the fuss about some new consumer product that uses an ARM Cortex A8, I'm interested to get in on some of the action. But I want a real programmable computer running something like Linux. I've seen many, many reports in the past 2 or 3 years about prototype ARM laptops with great battery life. Unfortunately, when I tried googling today, all I can find are the old videos and press releases about the prototypes, not a shipping product. Is there an actual ARM laptop available today? Or did everybody give up and just use Intel Atom chips?

  Read the article

• xorg DPMS off: keep VT from turning screen back on

  - by Metiu

  I have an embedded board with a small UPS. When AC power goes down, I need to turn off all power hungry devices in order to have a clean shutdown. First thing I do, is set DPMS to force powerdown, then go through the usual SIGTERM/SIGKILL/umount sequence. I have an Intel i915 Display adapter connected to an LVDS LCD panel. Unfortunately, when Xorg dies, Xserver or the VT code turn the LCD panel back on. I even tried working around it by directly poking the panel enable register in the Display chip, so that X doesn't know about it, but the panel goes back on when the VT comes back. Is there any "legal" way of keeping the display off? Thank you

  Read the article

• How to optimize mysql databse for serving 1000s of requests at a time ?

  - by Bilal

  How to optimize mysql databse for serving 1000s of requests at a time ? for a site like: linksnappy.com Is it possible to configure 2 seperate mysql servers into one load balancing server? like if one of them is overloaded switch to the next one ? same question for the http requests handling server. Another question : what kind of server do I need to server 1000s of requests at a time ? (http server) you can see the kind of site Im talking about is a download site. the server just dies when we have too many download requests. we currently have intel xeon quad core 2.4ghz with 4gb of ram.

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >