Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 11/87 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Cannot Mount USB 3.0 Hard Disk ?!!

  - by Tenken

  Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

  Read the article

• How to install my current Ubuntu based OS on to an external drive? [closed]

  - by Godel Fishbreath

  Possible Duplicate: How do I install Ubuntu to a USB key? How to copy an Ubuntu install from one laptop to another I have found urls to install ubuntu to a HD. But my current system has been upgraded and updated so often that it does not resemble anything on the web or on my drive disks. So giving my a url to how to install ubuntu will fail. Give me instead 'how to install my current Linux/Ubuntu based system (11.04) and all the upgrades to my external HD. Or alternately how to back up the OS into a bootable external HD. I am looking for either urls or a very complete explanation.

  Read the article

• "The daemon is being inhibited" error message when mounting volumes on a partitioned external HD [closed]

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• Ubuntu 12.04 not Locking Encrypted Hard Drive on Log Out

  - by J.L.

  I'm running Ubuntu 12.04 with Gnome 3.4. I have two external hard drives. I encrypted both using Ubuntu's Disk Utility. When I use Nautilus to mount them, I'm asked for my decryption password. Regardless of whether I then click "Forget password immediately" or "Remember password until you logout", though, I find that Ubuntu does not lock the drives when I log out. Rather, when I log back in, they're still mounted. (To be clear, restarting the computer does unmount them so that they require the password on the next log in.) I'm concerned that these drives are remaining unprotected when I log out without restarting my computer. I would be grateful for help understanding whether this is a bug. Thank you!

  Read the article

• External hard drive issue

  - by Blind Fish

  I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

  Read the article

• external disk dont work on ubuntu

  - by Skirki

  i have problem with in my ubuntu: when i connect external imation apollo disc i dont see a file system. Disk is working because in windows OS on this same computer it works as well. when i typed dmesg i got following logs [12913.260078] usb 4-1: new low speed USB device using ohci_hcd and address 15 [12913.440072] usb 4-1: device descriptor read/64, error -62 [12913.730058] usb 4-1: device descriptor read/64, error -62 [12914.020085] usb 4-1: new low speed USB device using ohci_hcd and address 16 [12914.200082] usb 4-1: device descriptor read/64, error -62 [12914.490150] usb 4-1: device descriptor read/64, error -62 [12914.780064] usb 4-1: new low speed USB device using ohci_hcd and address 17 [12915.200070] usb 4-1: device not accepting address 17, error -62 [12915.380081] usb 4-1: new low speed USB device using ohci_hcd and address 18 [12915.800065] usb 4-1: device not accepting address 18, error -62 [12915.800100] hub 4-0:1.0: unable to enumerate USB device on port 1 i trying to fix that by use commands: cd /sys/bus/pci/drivers/ehci_hcd echo -n "0000:00:02.1" unbind but it did not match the result and i don't have any other idea

  Read the article

• How to make Ubuntu LiveCD be able to use USB Flash drive and external hard drive?

  - by ????

  I am booting up Ubuntu 2012.04 LiveCD... and was able to do /sudo mount /dev/sda1 /mnt and be able to see files in /mnt, which is the main hard drive that can't boot up any more. So to copy files from /mnt to an external hard drive or USB flash drive, I connected a 1TB external hard drive and 2 USB flash drives to the computer, but for some reason, in "File Systems", I can't drag and drop files from /mnt into those external hard drive or USB flash drives? I can't open or look into those drives either... How to make it work?

  Read the article

• Icons of external devices not appearing on Desktop in 12.04

  - by harisibrahimkv

  In 10.04 and all, when a pen drive or as for that matter, when any external devices are connected, their icons are shown on the desktop and nautilus pops up automatically too. But in my 12.04 Gnome classic, when I connect an external device, nothing happens. I have to open nautilus manually and then click on the icon in the left panel to access the folder of the device. Is there any way to rectify this and restore the old trait as in 10.04?

  Read the article

• Grub2 attempting to boot hd1 when it should boot hd0

  - by JoBu1324

  I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

  Read the article

• default mount point changed for external HD

  - by JhmL

  The default mount point for my external HD changed when upgrading from 13.04 to 13.10. Now the username is added as an extra level before the hd label. So it used to be /media/nameofhd and now it became /media/username/nameofhd This breaks a lot of links I have set up to this disk. I know that I can mount it manually and even automatically through /etc/fstab. What I want to know is why this behaviour changed and how I can change it back to the original? blkid and fdisk don't show anything suspicious. thx!

  Read the article

• Mount external HD ubuntu 12.10

  - by Luigi Tiburzi

  Although it's an abundantly treated matter, I'm unable to find an answer valid for my needs. I had a 12.04 installation of ubuntu and I decided to install the 12.10. I copied (using GParted) the partition where my system was to an external hd where there is a windows partition. Then I installed the newest ubuntu version and now I want to take back some files (for example my .emacs) from that partition but when I try to mount it, it is not found as sdb and if I mount it from /dev/usb/hddev0 I don't get any output, only a blinking cursor, no errors, no output. I even tried to mount it as an ntfs disk but the result was the same. It's like the hd cannot be detected. So how can I access data to that disk? Could I get them from GParted terminal instead of Ubuntu one? Thanks

  Read the article

• external hard drive not detected after ubuntu crash [restarting machine]

  - by Netmoon

  today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

  Read the article

• Restoring backup with Deja Dup from external HD

  - by widgg

  So, here's the problem that I have with restoring. First, I backed up like everything. So I had place on the external HD for only one copy. I had to reinstall everything, but I didn't worry because I had a backup. But now, restoring doesn't work and it starts to be annoying. So, I right click "Restore missing files...". Then I have the popup window from Deja Dup asking where is the backup. So, I select the external HD and either put nothing in "folder" or just put ".". Thinking that it should be the base to look for backups. In both cases, after a while scanning, I get: The Volume "Filesystem root" has only 139.7mb disk space remaining. But my partition "/home" has 799.6Gb free. Also, I just want to restore some files, I don't need all of them. On my external HD, there's a file called: duplicity-full.20120514T220834Z.manifest. A text file. In it, I can see that everything is partitions in files of 52mb. So, small files are in one archive while very large files are split in multiple one. But I can see the exact list of file that I have. So, I'm guessing that my backup is intact. What am I doing wrong ? Is possible that it failes, even to list all the files, because I don't have enough space left on my ExtHD ? Why can't duplicity used another location to do that ?

  Read the article

• Can I install Ubuntu 12.04 on MacBook 6.1 (Late 2009) on my external hard drive?

  - by tommywinarta

  I have no experience in installing Linux based OS on MacBook, but I already have Windows installed on my Mac. I read some articles saying I can have the Lucid Lynx installed in my Macbook 6.1 and luckily I already got the CD (which was distributed for free back then haha), my question is that can I have the 12.04 installed instead of the 10.04 and what do I need to do that? I also would like to know can I install it on my external hard drive just like installing it on a usb stick? I have viewed the how-to for installing the Lucid Lynx, is it just the same? Thanks in advance!

  Read the article

• Damaged external NTFS hard disk

  - by Thanos

  A few days ago, I used my external hard disk (a 2TB Seagate) in order to transfer some files on Windows Vista. During that, I noticed some malfunctions on my system (it was running too slow, Windows Explorer crashed). When Explorer crashed, file transportation stopped. I was afraid, but I tried to access my files and it seemed to be working. I tried to open a movie (from the external disk) but it couldn't load. I thought of restarting, but this took sooo long... So I unplugged the hard disk and at that time it managed to shut down. I logged on to Windows Vista but the hard disk couldn't be mounted. I plugged it but nothing happened. I unplugged it and I heard this specific sound that notifies that something has been unplugged. I thought of logging to Ubuntu 10.04 and see what I can do. I plugged the hard disk, but I couldn't see it. I opened GParted but I couldn't see it either. I tried with Disc Utility and there it was! I tried to mount it but a got an error message stating that an error occured with Windows, there is a file (0,0) that has problem or something like that. It suggested to log into Windows and run chkdsk /f and reboot twice. The thing is that I am somehow afraid to do so because I don't really know the impact on that. Plus I don't trust doing even a check on Vista... I finally risked it and I typed chkdsk/f on a cmd. I cannot, however, actually run it because I don't have admin privileges. So from search I found chkdsk, I right cliked and selected “run as administrator”. It run but I got a message like NTFS file system. It should check at the coming restart. At that point I am mistaken. I thought that f meant F but this is not the case here... Does anyone have any suggestions and advice?

  Read the article

• GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

  - by AndiDog

  I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

  Read the article

• Getting windows 7 to boot from external hard drive. Using Ubuntu

  - by SMS

  I have Ubuntu 12.04LTS as my current operating system, and I have a Windows 7 iso on a disk. I'm using an external hard drive because my internal hard drive has become damaged. I need to get Windows to install onto my external hard drive (where Ubuntu is as well). The iso disk will not install windows to the hard drive. Can anyone help guide me through the process of getting windows on the external?

  Read the article

• How do I access an external drive mounted on a machine on my own network?

  - by avilella

  I've got one desktop computer Ubuntu 11.04 with an external USB drive mounted on it on the home WRT54L Linux network (192.168.0.2), and when I arrive at home with my laptop, I want to be able to mount the external USB drive from my Ubuntu 11.04 laptop (192.168.0.3) to the desktop, without having to unplug it from the desktop, that is accessing it. Is it possible to send a remote mount command to the desktop usb drive from my laptop? Ideally something that creates a local mountpoint I can just call locally from the programs installed in my laptop, like: username@laptop ~ ./myprograminlaptop /my/file/which/is/actually/on/the/desktop/file.txt

  Read the article

• External hard-drive is "clicking" when idle [closed]

  - by mirumir

  I'm struggling with a very annoying issue: My new hard-drive (Samsung Spinpoint M8 1TB (HN-M101MBB) was build in an USB 3.0 external case (Lian Li EX-10QR) and formatted with ext4. When this hard-drive is connected to my Notebook via USB 2.0 it "klicks", the LED flashs too, every second, but only when it's idle! It stays silent, when something is copying or reading from it. But when this drive was formatted with ext3 or fat, it always remained silent. This also happens with a Western Digital WD10JPVT Scorpio Blue, but the "klicks" are even louder! System: 12.04 64-bit with Gnome-Shell. Any ideas how to approach this issue?

  Read the article

• External Hard disk not workng on windows after I formatted it on Ubuntu

  - by nav_jan

  I formatted my Western Digital 500 Gb hard disk on Ubuntu 10.4 and now I want to use it on Windows 7 but it cannot detect it. I formatted it with FAT(applicable to all) option. I tried to Google this problem a bit and as suggested by one of the site i tried to format this drive with NTFS. Still windows cannot detect it. Drives in windows 7 is not a problem because I tried a different usb drive on it and it works. I can see the led of the drive glow when I connect it and I can also see remove drive safely option in lower right corner, but i cannot see any option in "my computer" to access the hard disk. I am new to Ubuntu. Any help is appreciated.

  Read the article

• How to turn off power management for external hard drive (Seagate GoFlex)?

  - by RPG Master

  I bought this 2tb Segate GoFlex this last Black Friday and since then every 15 minutes or so the drive spins down, and then a little while later completely dismounts. Very annoying. From what I understand you could turn this off using the including Windows and Mac only software. This function and what controls it isn't proprietary, right? There has to be something that'll let me set it in Ubuntu... Anyone have any suggestions? Also, I formatted it to EXT4. Hope I didn't screw myself up. :/

  Read the article

• Turn Off Sleep on Seagate GoFlex?

  - by RPG Master

  I bought this 2tb Segate GoFlex this last Black Friday and since then every 15 minutes or so the drive spins down, and then a little while later completely dismounts. Very annoying. From what I understand you could turn this off using the including Windows and Mac only software. This function and what controls it isn't proprietary, right? There has to be something that'll let me set it in Ubuntu... Anyone have any suggestions? Also, I formatted it to EXT4. Hope I didn't screw myself up. :/

  Read the article

• Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

  - by XaviGG

  I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

  Read the article

• About HDD enclosure

  - by kmitnick

  hey guys, how r u doin? I have this 3.5" IDE enclosure, and it works great, I mean I love the idea of enclosures ( not the power feeding thing :), btw can't I just insert a chargable battery to feed the power when I am unable to find an electricity block), anyway my question is, when I finish the usage of the enclosure I safely remove it when using Windows or umount when working with Linux, and after that I got confused whether to turn it off or no? when I turn it off, the HDD suddenly stop spinning as if power failure not as when it was an internal and normally shuted down the pc. So is it ok to turn it off the way I've just said??? regards, ~Abed

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >