Search Results

Search found 4731 results on 190 pages for 'ram rachum'.

Page 110/190 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Cables for building a computer

  - by Faken

  I'm looking at building a computer and I have already done a whole bunch of research the topic and I think I know what I'm doing. My question is where do all the cables required for connecting everything come from? I'm pretty sure that the cables required come from their respective components (power connectors from the power supply, assorted cables from the motherboard, ect). However nowhere have I seen it explicitly stated that the cables come with the component I am buying. Just to confirm, if I buy all the components needed for a basic computer (CPU, motherboard, power supply, case, ram, video card, hard drive) from a website, say newegg, will I have all the screws, cables,connectors, and components to put together a working computer or will I need to buy some cables somewhere?

  Read the article

• Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

  - by David Murdoch

  I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity:  12288MB Currently Installed Memory:  2GB Available Memory Slots:  2 Total Memory Slots:  6 Dual Channel Support:   No CPU Manufacturer:  GenuineIntel CPU Family:  Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed:  2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

  Read the article

• Computer Studdering When Transferring Over Network

  - by Nalandial

  This is a really weird problem that I've never even seen before. When I copy to or from my server share, my computer studders terribly and the data transfers very slowly at only around 12MB/s. By studdering I mean the mouse skips around and all my applications respond very slowly; as soon as I cancel the transfer it resolves immediately. I looked at Task Manager and the CPU is only at ~35% with plenty of RAM free. This only started semi-recently; before, I had no problems and the transfer speed maxed out the gigabit connection. I have two hard drives in my computer. When I try transferring files between drives it's fine, but when I copy from the share to either drive or to it from either drive, I get studdering. I'm running Windows 7 x64. Anyone have any idea what's going on? Any help would be much appreciated.

  Read the article

• raspberry pi for web programming/development

  - by Mark Dee

  I'm into web development and my machine (AMD Phenom II, 8G RAM) is running Ubuntu 13.04. I love my current setup but I kinda miss some of Windows software like MSOffice or Adobe suites, and running on Virtualbox doesn't feel as snappy for me.... So I'm thinking of buying a new cheap machine where I would install Linux and do my development work there and have my current machine run Windows. I just found this thing called Raspberry pi which is really cheap and requires 12v only (I think) which makes it good for downloading stuff overnight. So, does it make sense to buy Raspberry pi, make it my primary dev machine, Windows being the secondary (for Adobe and browser testing of course)? Basically, I want to know if Raspberry pi meets the following requirements: It should run ArchLinux Sublime Text 3 python ruby nginx nodejs Deluge or Transmission (well, maybe just those, no need for videos and music players)

  Read the article

• Location of Opera cookies set to expire after restart (time 0)

  - by marc

  Where does Opera store cookies that are destroyed or expire after the browser is restarted? I'm looking for information on where these temporary cookies, with time expire (0), and that are deleted after a browser restart. I tested a file "cookies4.dat" using a hex editor and it doesn't have the temporary cookies stored inside. Does Opera create a temporary file for these cookies and delete them after restart? If that was so, where are they? Or does it store them in RAM?

  Read the article

• internal compiler error

  - by hyperboreean

  I am getting this message: internal compiler error: Segmentation fault Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.4/README.Bugs> for instructions. for every compilation that takes longer (ie: linux kernel, kde sources etc.) I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?

  Read the article

• Photoshop CS4 slowing down, need advice to improve speed.

  - by Pennf0lio

  Hi, I just recently experienced problem with my Photoshop, It seem that it is slowing down when I am doing graphics design. Big or small files ( from 20 x 20 inch 300 dpi of resolution to 800x600 72 resolution ) it is really slowing down. Particularly when I am panning to my project It just get stuck for a few seconds then back to normal with slow movement. Can you guess what's wrong? I have an updated antivirus and I don't think virus is causing it. other adobe suite is working fine just my photoshop. I am running in windows 7, using Intel Core2 Duo 2.40 Ghz and has an Installed Ram of 2 GB. My primary scratch disk has 21 Gigabyte left and the secondary has a 13.89 GB. I need a solution urgently. I am planning to reformat my computer just to resolve my problem.

  Read the article

• CPU I/O communication

  - by b-gen-jack-o-neill

  Hi, I know there is this question already discussed, but I still don´t understand something, so please just help me clarify it. What I understand there is 2 way to do I/O aka communicate from CPU with other HW. One is to use in and out instructions, and second is the memory mapped. But what I don´t actually understand is, is IN and OUT instructions are used, you define source port. But what is this port? I mean, is it different set of pins on CPU or what? And, to what is that port connected? And for the memory mapped, I miss just a tiny detail. Wheather memory mapped I/O must be first set by IN and OUT instructions, or does the device actually somehow itself connects to the RAM and reads it? Thanks.

  Read the article

• Laptop recommendation for home user

  - by Mehper C. Palavuzlar

  I'm going to buy a new laptop soon and I need Super Users' recommendations. The following criteria are crucial for me: Intel i series processor Min. 4 GB RAM Min. 500 GB HDD HDMI port Min. 3 USB ports Not a monster, but a good graphics card Multimedia card reader DVD-RW Double Layer No heating problems! What do you recommend me? I'm considering buying a Vaio but I'm not sure. TIA.

  Read the article

• Ubuntu server 9.10 freezes up after ~10 minutes

  - by Matt Williamson

  I just upgraded my Ubuntu server from 9.04 to 9.10 and after about 10 minutes it locks up. It won't respond to ping, can't ssh in and the terminal doesn't accept keyboard input. It does not have X installed. I then reformatted and installed it from scratch with the same results. There are two hard drives, the first is for the OS and the second is for media. The second has not changed, it is an ext3 formatted drive with one partition. I stopped random services (samba, ushare, transmission-daemon) to see if they were causing the issue, but it still locked up. I did a watch "dmesg|tail" until it locked up, but I didn't see anything. How can I troubleshoot this further? I don't want to downgrade. Machine specs: Dell Dimension 3000 Pentium 4 @3GHz 512M RAM

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• Linux for a laptop? [closed]

  - by spriteless

  I would like to install Linux on a laptop. So I have emptied the hard drive, and can boot off a CD. So far I have failed to format the hard drive to Linux, to install Linux, and to change it so that I don't have to hit escape when loading in order to boot from CD (or get Linux on the hard drive and boot to it). The old laptop has 640 MB RAM, 600*800 screen, a CD drive and USB mouse and floppy drives. I eventually mean to use it to look at PDFs if possible, or RTFs that I converted from PDFs if not.

  Read the article

• Throughput = BS * IOPS?

  - by Marvin

  I've seen in many places that throughput = bs * iops should be true. For example writing at 128k block size to a SAS disk that can support 190 IOPS should give a throughput of ~23 MBps - 23.75(MBs) = 128(BS)*190(SAS-15 IOPS)/1024. Now when I tested it in a VM against a monster NetApp filer I got theses results: # dd if=/dev/zero of=/tmp/dd.out bs=4k count=2097152 8589934592 bytes (8.6 GB) copied, 61.5996 seconds, 139 MB/s To view the IO rate of the VM I used iostat and esxtop, and they both showed around 250 IOPS. So to my understanding the throughput was supposed to be ~1000k: 1000(KBs) = 4(BS)*250(IOPS). dd of 8GB is twice the size of RAM of course, so no page caching here. What am I missing? Thanks!

  Read the article

• Most suitable high availability solution

  - by Alex Bagnolini

  My company is hosting a website in a server with IIS, SQL Server and a 3rd party windows service (written in C#, source code available for amendments). We bought a new identical server, composed by: 1x Quad Core, 12GB RAM, 4x160GB SATA Raid 5, Windows Server 2008 R2 Datacenter, Public IP. We aim to put all webpages and the 3rd party windows service in an high-availability state. After some lab-testing on how to configure Failover Clustering and Hyper-V, we have deep doubts on what the "best" solution would be, by "best" meaning maintainable and able to correctly handle a physical server failure. Any suggestion on how we should configure the two servers? We don't need all the configuration's step, just an hint on the right direction to follow.

  Read the article

• Weird problem, special characters coming after formatting the hard drive, computer isn't starting 0_

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting (quick format) and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• How to config mysql-server for heavy load

  - by Rasmus

  Im in the process of setting up a new database server. I have been running a few mysql database servers before and it has been working okay. But i would like to hear the recommended setup for my server. For example, what should i set the max connection, query_cache_size, table_cache and so on. I have arround 4-600 per second: Open tables: 112 Queries per second avg: 430.386. The server i am setting it up on have the following configuration: Linux version 2.6.32-5-amd64 (Debian 2.6.32-41squeeze2) 2x Intel Xeon X3440 @ 2.53GHz 4GB Ram /, /boot, /tmp etc on Software RAID1, 2x 7200RPM SATA Data location on Software RAID0, 2x7200RPM SATA Im am going to place the mysql databases on the RAID0. Am im missing anything? Let me know! Thanks in advance, im looking forward to hearing from you :-) /Rasmus

  Read the article

• Recommended Configuration to setup Tomcat 7 on windows OS

  - by yashbinani

  I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

  Read the article

• Preparing Automatic Repair appears out of nowhere & takes forever?

  - by Jörg B.

  I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

  Read the article

• apache2 slow responding (debian)

  - by baloo

  I'm running an apache2 2.2.9 webserver with modpython and mpm_worker_module. The current config for the mpm is ServerLimit 32 StartServers 10 MaxClients 800 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 The server has 1G of ram and a 100Mbit connection. Checking netstat -na | grep ESTABLISHED | wc -l gives me a number between 50 - 60. The load is about 1.0 Every pageload is also cached by memcached. I can't see why the server is so slow in responding to new connections, sometimes droping them completely? Also tried disabling iptables to make sure it's not because of a full state table or something like that. The only thing in dmesg is a lot of spam about "TCP: Treason uncloaked!"

  Read the article

• Intel Server Board S3420GP fails to boot with video connected

  - by Riley

  All, Building a new system using an Intel Server Board S3420GP motherboard and an Intel Xeon X3440 processor. Before installing this motherboard into the chassis we want to test that it will actually boot correctly. We have mounted the processor and RAM with no hard drives attached. The boot sequence differs between the next variable: 1) Connecting video results in the system fans ramp up and down, twice, and then the system beeps with the same behavior repeating; the system status light shows "Amber" 2) With no video, the system goes through POST and the diag LEDs show that the system is missing a bootable device Need some assistance identifying why the board would fail to POST with video connected. // Update // Using another Power Supply the system gets passed the fans ramping up and down twice. Video still does not display.

  Read the article

• Minimum power requirement for VGA vs. its working

  - by Shiki

  Got a new XFX GTX260^2 video card. The only problem is the "Minimum power" is 500W on the box. I've got a Chieftec 450AA PSU with just a minimal number of attached stuff (1hdd, WD green; 6gb (4module) ram; dvd writer). Bought a cable for the 6pin power input on the card. Got picture, works in every aspect. Still. Should I get a new PSU (like a Corsair or Antec 600W)? Will the card perform slower with this PSU? (Yeah the last part is a particular question but in I'm also asking in generic. I was wondering about this so many times and I hope we'll put and end for this question for once and for all.)

  Read the article

• Office suite for eMAC

  - by Adam Pierce

  I have been given 10 old eMAC computers to donate to a local primary school. I am a PC person but I have volunteered to set these up with some kind of office suite. The specs are: 700MHz G4 640MB RAM (should be enough for anyone!) OS-X 10.3 40GB hard disc with 30GB free space I'd like a recommendataion for an office suite that will work on these old boxes. I have tried Open Office, both the latest version and 2.4.3 for PPC with no luck. Yes, I do have X11 installed.

  Read the article

• How to choose size for a cloud server (rackspace)

  - by Emil

  We're going to test the rackspace cloud next week to see how it's working with our web app. It's a LAMP environment with a lot of MySQL databases. How do I choose the "right" server size? On Rackspace I can choose slices with the memory of 256, 512, 1024, 2048, 4096 etc. Right now we don't have a lot of traffic (approx. 1000 visitors/day) but I thought the whole "cloud" idea was to not be limited and auto scale. Update: What I'm looking for is now a specification of what I need. I know it's too complex. I'm looking for examples, case studies etc. It would be interesting to hear something like "Yes we're serving 10 000 daily requests without spikes on a LAMP stack with only one slice on with 2 GB RAM".

  Read the article

• SQL Server Files Local or NAS or SAN?

  - by Jedi Master Spooky

  I have to install a new Server with SQL Server 2008, What do you recommend, One server with Raid 10 or the Files in a NAS? What about iSCSI should I use it? What about SAN? The server has 4Gb of RAM and that database file is about 2GB. To make my self clear today the server has no RAID, I have to implement some kind of strategy so if something happend I can have my files safe, so What should I choose Local Files, NAS, SAN? What option has the most performance, what is the more secure?

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >