Search Results

Search found 3568 results on 143 pages for 'cost savings'.

Page 112/143 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• Automatically Kill/Restart Process(es) When Memory is Critically Low

  - by nemesisfixx

  I have a Debian Wheezy VPS box where am running a couple of Django apps in production. Ideally, would have tried addressed my current memory footprint issues by optimizing the apps, adding more RAM or augmenting with Swap. But the problem is that I doubt there's much memory optimization I'd milk from optimizing the Django apps (the stack being open-source and robust), and adding RAM is a cost constraint for me (this is a remote VPS), also, the host doesn't offer options to use Swap! So, in the meantime (as I wait to secure more resources to afford more RAM), I wish to mitigate the scenarios where the server runs out memory so that I just have to request a VPS restart (as in, at that point, I can't even SSH into the box!). So, what I would love in a solution is the ability to detect when a process (or generally, total system memory usage) exceeds a certain critical amount (for now, example the FREE RAM falls to say 10%) - which I've noticed occurs after the VPS's been up for long, and when also traffic is suddenly much to some of the heavy apps (most are just staging apps anyway). So, I wish to be able to kill/restart the offending process(es) - most likely Apache. Which solution when done manually in these situations has restored sane memory usage levels - a hint that possibly one or more of the Django apps has a memory leak? In brief: Monitor overall system RAM usage When FREE RAM falls below a given critical threshold (say below 10%), kill/restart the offending process(es) - or simpler, if we assume from my current log analysis (using linux-dash) that Apache is often the offender, then kill/restart it. Rinse and repeat...

  Read the article

• How will I support 100,000 requests an hour?!

  - by tylerl

  I know this question is a little strange but I got lucky with an idea and I need some numbers to use for when I try to make a deal with a company. I'm wondering how much it'll cost me to run a site that's heavy on PHP and gets between 70,000 and 100,000 requests an hour on something like Rackspace's Cloud Servers. I have no idea how many servers I need or how much RAM each one should have. There will be a decent number of images on the site (probably something like 10,000 in the first couple weeks) and the site runs on about 2,500 lines of PHP code. I figure I should sign up for a CDN of some kind, although CDN In A Box is all I've heard of and I'm not sure it's necessary for a site that's already on a cloud platform. I've obviously never done anything like this before so I'm just looking to get an estimation of what I need for this massive site... Also, I use a database and I was wondering how that works - would I dedicate one of the cloud servers to running the database or would I need to put the database into each of the cloud servers? Thanks in advance...

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Which database to use and system/db administration by layman [closed]

  - by blah

  So my friend and I got briliant ;) idea for a business. Since it is not predictable whether it will work out or not, we decided to keep cost as low as possible to start with, in particular not to hire anyone. If it will work out as expected it will generate enough profit to hire professionals in few months. But for the first few months we'll be doing everything by ourselfs. He's a business/finance major, and I'm a software developer, so obviously I have to take care of IT :) It will be a webapp, written in python/django. My questions regarding this project: 1) What database should I choose? I'm experienced with oracle, and have been working with SQL Server for a while, but both of them are too expensive(at least now). It's a developer experience, I've never done any dba stuff. I'm looking for something free(as in beer). Looks like MySql or PostgreSQL are most popular in this sector. I would appreciate any comments on which db to choose. I'm open to any suggestions(it doesn't have to be MySql or Postgre). Here's what I know about data: It will be almost dates and numbers, a little bit of text. Searched mainly by dates. Data will almost never be updated, mostly inserted and browsed. From 30k to 300k new records/month. 2) Servers. My idea is to rent two dedicated servers. During normal operation one would be a web server(debian/apache), other would be a db server(debian/?). My recovery plan is to install everything on both, and in case of trouble with one of machines just run everything on the other one. Does it even makes sense? Any other tips appreciated. Thanks.

  Read the article

• cPanel web server redundancy advice?

  - by crgnz

  At present I operate a (reasonably low volume) web-hosting service with a Centos 5.3 server running cPanel/WHM. I would like to implement a level of redundancy such that in the event of server failure, I can restore service with a minimum of effort in less than 60 minutes. I also want to setup a secondary DNS that cPanel will replicate with. My current idea is to kill two birds with one stone by: My current server is called "www1" Purchase an identical server (HP DL360 G4) with mirrored disks. Call this server "www2" Install Centos 5.4 (or perhaps I should install 5.3 to be identical with www1) Install cPanel/WHM on this server and fully license it Setup www1 and www2 cPanel to replicate DNS with each other Setup a nightly replication script that does the following: a) rsync's the /home directory from www1 to www2 b) dumps all MySQL databases on www1 and copies them to a temp folder (with root access only) on www2 c) triggers a script to run on www2 that restores the MySQL dumps Thus each night a fully working copy of all the websites and MySQL databases is copied to www2. I do not have enough knowledge of MySQL replication to understand if it works safely and transparently with cPanel. Thus I propose the mysql dump/copy/restore due to not knowing any better! In the event that www1 dies a horrible death, I envisage that I could login to www2, change the IP addresses to those that www1 had, and presto, the websites are available again. The advantage of this idea is that it is fairly simple and "low tech" and thus does not require an expert sysadmin to setup and monitor (I am NOT an expert sysadmin) The disadvantage of this idea is that up to a full days worth of data changes would be lost. I think this would be acceptable to the sorts of customers I host at the moment. The other disadvantage would be having to pay for a full cPanel license, but I am comfortable with that cost, so for now all I want to discuss are technical considerations. Is this a sound scheme?

  Read the article

• Is basing storage requirements based on IOPS sufficient?

  - by Boden

  The current system in question is running SBS 2003, and is going to be migrated on new hardware to SBS 2008. Currently I'm seeing on average 200-300 disk transfers per second total across all the arrays in the system. The array seeing the bulk of activity is a 6 disk 7200RPM RAID 6 and it struggles to keep up during high traffic times (idle time often only 10-20%; response times peaking 20-50+ ms). Based on some rough calculations this makes sense (avg ~245 IOPS on this array at 70/30 read to write ratio). I'm considering using a much simpler disk configuration using a single RAID 10 array of 10K disks. Using the same parameters for my calculations above, I'm getting 583 average random IOPS / sec. Granted SBS 2008 is not the same beast as 2003, but I'd like to make the assumption that it'll be similar in terms of disk performance, if not better (Exchange 2007 is easier on the disk and there's no ISA server). Am I correct in believing that the proposed system will be sufficient in terms of performance, or am I missing something? I've read so much about recommended disk configurations for various products like Exchange, and they often mention things like dedicating spindles to logs, etc. I understand the reasoning behind this, but if I've got more than enough random I/O overhead, does it really matter? I've always at the very least had separate spindles for the OS, but I could really reduce cost and complexity if I just had a single, good performing array. So as not to make you guys do my job for me, the generic version of this question is: if I have a projected IOPS figure for a new system, is it sufficient to use this value alone to spec the storage, ignoring "best practice" configurations? (given similar technology, not going from DAS to SAN or anything)

  Read the article

• Tracking Security Vulnerability remediation

  - by Zypher

  I've been looking into this for a little while, but havn't really found anything suitable. What I am looking for is a system to track security vulnerability remdiation status. Something like "bugzilla for IT" What I am looking for is something pretty simple that allows the following: batch entry of new vulnerabilities that need to be remediated Per user assignment AD/LDAP Authentiation Simple interface to track progress - research, change control status, remediated, etc. Historical search ability Ability to divide by division Ability to store proof of resolution for the Security Team to access Dependency tracking Linux based is best (that's my group :) ) Free is good, but cost doesn't matter so much if the system is worth it The systems doesn't have to have all of these features, but if it did that would be great. yes we could use our helpdesk software, but that has a bunch of pitfalls such as triggering SLA alerts and penalties as well as not easily searchable outside of a group. Most of what I have found are bug tracking systems that are geared towards developers, and are honstely way overkill for what I am looking for. Server Faults input is greatly appreciated as always!

  Read the article

• Defeating the RAID5 write hole with ZFS (but not RAID-Z) [closed]

  - by Michael Shick

  I'm setting up a long-term storage system for keeping personal backups and archives. I plan to have RAID5 starting with a relatively small array and adding devices over time to expand storage. I may also want to convert to RAID6 down the road when the array gets large. Linux md is a perfect fit for this use case since it allows both of the changes I want on a live array and performance isn't at all important. Low cost is also great. Now, I also want to defend against file corruption, so it looked like a RAID-Z1 would be a good fit, but evidently I would only be able to add additional RAID5 (RAID-Z1) sets at a time rather than individual drives. I want to be able to add drives one at a time, and I don't want to have to give up another device for parity with every expansion. So at this point, it looks like I'll be using a plain ZFS filesystem on top of an md RAID5 array. That brings me to my primary question: Will ZFS be able to correct or at least detect corruption resulting from the RAID5 write hole? Additionally, any other caveats or advice for such a set up is welcome. I'll probably be using Debian, but I'll definitely be using Linux since I'm familiar with it, so that means only as new a version of ZFS as is available for Linux (via ZFS-FUSE or so).

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• Free web-based software for team collaboration/documentation

  - by Jason Antman

  Looking for some advice here, as my search has turned up to be pretty fruitless. My group (9 people - SAs, programmers, and two network guys) is looking for some sort of web tool to... ahem... "facilitate increased collaboration" (we didn't use a buzzword generator, I swear). At the moment, we have an unified ticketing system that's braindead, but is here to stay for political/logistical reasons. We've got 2 wikis ("old" and "new"), neither of which fulfill our needs, and are therefore not used very often. We're looking for a free (as in both cost and open source) web-based tool. Management side: Wants to be able to track project status, who's doing what, whether deadlines are being met, etc. Doesn't want full-fledged "project management" app, just something where we can update "yeah this was done" or "waiting for Bob to configure the widgets". TeamBox (www.teambox.com) was suggested, but it seems almost too gimmicky, and doesn't meet any of the other requirements: Non-management side: - flexible, powerful wiki for all documentation (i.e. includes good tables, easy markup, syntax highlighting, etc.) - good full text search of everything (i.e. type in a hostname and get every instance anyone ever uttered that name) - task lists or ToDo lists, hopefully about to be grouped into a number of "projects" - file uploads - RSS or Atom feeds, email alerts of updates We're open to doing some customizations (adding some features, notification/feeds, searching, SVN integration, etc.) but need something F/OSS that will run under Apache. My conundrum is that most of the choices I've found so far fall into one of these categories: project management/task tracking with poor wiki/documentation/knowledge base support wiki with no task tracking support ticketing system with everything else bolted on (we already have one that we're stuck with) code-centric application (we do little "development", mostly SA work) Any suggestions? Or, lacking that, any comments on which software would be easiest to add the lacking features to (hopefully ending up with something that actually looks good and works well)?

  Read the article

• Pivot tables: How can I total the subtotal?

  - by Mike

  Person A needs £115, Person D £234 and Person G £789, but how do I SUM that and get it to show on the same ROW as the subtotal? The Rows are subscription names. The Value field holds the Cost per subscription. the Columns holds the name of the person who receives the subscription. I have GROUPED on YEAR & MONTH, and have a subtotal that shows me how much each person will need to pay each month for all their subscriptions, but I need a figure showing me the total of all the subscriptions per month. I've tried adding calculated fields, but I want to SUM the subtotals so I'm struggling to see the field I need to use. I've tried Grand Totals but that SUMS all rows and I really only want SUM the Subtotal Total Row. I need a nice neat report that my managers won't go white at when looking at it...to many numbers = fear and confusion. Anyway it got messy, so I've come for help. Cheers Mike.

  Read the article

• Networking - intermittent, slow speeds

  - by jack

  Hi all I'm a novice when it comes to networking. I live in a large two storey building that used to be a school and we have an internet connection with BT (british telecoms provider), the connection speed is 12Mb.. Basically our connection is slow and very intermittent and I was wondering if anybody here could provide some help or ideas. There are about 11 people in the building who could be online at any time. We have a router on the ground floor which is bog standard supplied by BT. To provide Broadband access to the 1st and 2nd floors, we used an old switch that the school left, we have a cable running from the router on the first floor to the switch which connects to a wireless router which is configured as a bridge on the 2nd floor supplying broadband access to the 1st and 2nd floors. Additionally we have 3 computers that are connected via the switch through the ethernet sockets left by the school on the ground floor. The router we use on the 2nd floor came in a pack of 2 and cost about £15 (bought by another person). Sometimes the connection is perfectly fine, i.e. early hours of the morning or when everybody is out, we have rang BT who say that the connection cannot cope with the numbers of people online, plus I'm not sure whether each person is streaming etc. Can anybody offer any advice?

  Read the article

• Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

  - by techaddict

  Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• Printing to a remote printer through the internet

  - by Lock

  I have a remote network (A) that is connected to a head office (B) through a private network. Network A only has 1 PC that requires the connection, and this is into a terminal server at network B. We want to save money by getting rid of the private network as only 1 PC now access it and it seems silly to pay ~$400 per month for something that is accessed by 1 PC. A VPN tunnel is out of the question as the provider wants to charge $600 a month for a VPN tunnel (more than a private network? I might get them to check these numbers). I was thinking of 2 options: 1) VPN client on the PC. This wouldn't cost a thing as we already have VPN users available. 2) Open up a port on the firewall of network B, forwarding to the terminal server. Now the problem is this: On the terminal server, the program that is accessed is for printing labels to the printer that is at network A. The program is setup to send all print jobs to a printer that is setup locally on the terminal server, which has its port mapped to the IP address of the printer that is at network A. If we got rid of the VPN tunnel and used clients/open up firewall port, the printer would no longer be able to find network A, and hence printing would not work. Any ideas to combat this issue? Can the printers at the remote network be setup as internet printers? I've never had any experience with internet printers. Can you open up ports and map to a public static IP address?

  Read the article

• Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

  - by Carl Lindberg

  I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

  Read the article

• Programmer configuring a new network

  - by David Lively

  I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

  Read the article

• Value of Itanium over x86_64 for Oracle Deployment

  - by Antitribu

  We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium hardware, are there any drawbacks? Is there a point where Itanium starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the two platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer.

  Read the article

• ADSL to T1, Is it worth it for us?

  - by Jack Hickerson

  The company I work for has roughly 45-55 simultaneous users (local and remote/VPN) logged in at a given time. We currently subscribe to an ADSL connection but we have been experiencing slower upload/download speeds as our number of users increase. So, I have a few questions with regards to upgrading our connection to a t1 line. I am aware that the number of channels on a t1 line are much greater then that of our current ADSL connection, but I have heard that the number of active users on a t1 line should be no greater than ~30 for optimal performance. I would think this statement is dependent on what each user was using the connection for and could change depending on this variable. That being said, I have tried to break down how the line would be used in our organization based on our major departments: Sales (~60% of total users) - Everyday surfing, email, research, occasional streaming media Marketing (~15% of total users) - Heavy reliance on uploading/downloading, streaming media, file sharing Other (~25% of total users) - email, rare use of any connection intensive activities. I have considered keeping the ADSL for our local users and dedicating the t1 to our remote users (or vice versa) but the cost is significantly higher then what we had hoped for. All factors being equal (# of users, frequency of downloads/uploads from our current activities) Would you suspect a significant performance increase in making the transition to a t1 line from our current ADSL line? What are your thoughts or recommendations?

  Read the article

• Small Business HP Virtualisation and iSCSI SAN Options

  - by Robin Day

  We are a small business that hosts our core product on a number of HP servers. Our core production setup is 1x HP DL380, high powered for a SQL Server Database 1x HP DL360, mid powered for our core application server 6x HP DL320, low powered for our front ends We run our training / testing / support systems on a similar setup, the servers are just older and less powerful. Unfortunately this is now causing us issues as the system has grown beyond the capabilities of these older servers. Upgrading these servers would be expensive and we believe that virtualisation is probably the way to go for the future. Locally we run a number of test / dev environments on ESXi using Direct Storoage on a couple of high powered DL360's and these are performing fairly well. We're thinking that instead of replacing all of our test servers that we can implement an iSCSI SAN and one or two high powered hosts. Hopefully looking that when it comes to replace our live servers as well that we can just expand the virual environment to cope. So my question is... Can anyone offer any advice on some suitable options? We have generally always been extremely happy with HP servers, all of our kit is currently HP, therefore our preference would be to stick with HP, however, I'm always happy to hear about other options. I'm hoping that initially a budget of around 15-25k (GBP) would be suitable, this could potentially be increased if I had confidence that the system would pave the way for a cost effective upgrade of our live systems in the future as well. I am new to SAN's and my only real experience is playing with OpenFiler on some old desktops. I think iSCSI should be suitable, but I've not done any research into how SQL server may perform. I've had a browser through HP's sites and see plenty of information about EVA, MSA, LeftHand, etc. However, from looking at all that, I don't see which options would be best and more importantly I don't know exactly what I would need to buy. Any help, links, opinions would be much appreciated. Thanks

  Read the article

• centos TCP/IP connection very slow

  - by yuli chika

  I have a VSP (centos6.1 64bit) with 4gb ram. It always runs well, but in recent few days, the server become slowly. open a small css file need 22 seconds(2kb). tested in home/office/phone with (IE,chrome,safari,firefox). see in firebug networking DNS Lookup ?4?ms Connecting ?21.18?s Sending 1?ms Waiting ?115?ms Receiving ?9?ms The connection cost 21.18 seconds I have checked all the log file, there have no error. top commond, still have free memory. top - 00:23:15 up 8 days, 3:57, 1 user, load average: 3.60, 3.42, 3.83 Tasks: 221 total, 4 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 19.3%us, 3.2%sy, 0.0%ni, 76.1%id, 1.4%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4194304k total, 3247724k used, 946580k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32357 mysql 15 0 3710m 835m 6268 S 34.5 20.4 39:14.40 mysqld 9780 apache 15 0 442m 59m 12m S 33.2 1.4 0:05.69 httpd 9842 apache 15 0 403m 26m 10m S 16.9 0.7 0:01.23 httpd 9847 apache 15 0 412m 45m 22m R 15.3 1.1 0:01.00 httpd 9834 apache 15 0 426m 46m 11m R 13.0 1.1 0:02.22 httpd 9891 apache 15 0 407m 43m 19m S 8.0 1.1 0:00.33 httpd 9845 apache 15 0 414m 51m 24m S 6.0 1.3 0:01.53 httpd 9827 apache 15 0 402m 28m 11m S 3.3 0.7 0:02.69 httpd 9768 apache 16 0 414m 51m 24m S 3.0 1.3 0:06.51 httpd 9889 root 15 0 211m 12m 8160 S 2.7 0.3 0:00.32 php 9702 apache 15 0 415m 55m 26m S 1.7 1.4 0:10.67 httpd 9844 apache 15 0 413m 47m 21m S 1.7 1.2 0:01.21 httpd 9697 apache 15 0 414m 51m 24m S 1.3 1.3 0:11.05 httpd 9778 apache 15 0 414m 53m 25m S 1.3 1.3 0:05.38 httpd 9772 apache 15 0 414m 51m 23m R 0.7 1.3 0:05.04 httpd 9823 apache 15 0 415m 50m 23m S 0.7 1.2 0:03.97 httpd 9837 apache 15 0 402m 27m 11m S 0.3 0.7 0:01.04 httpd Then, how to check where is the problem and fixed it? I haven't change and config files in these days. Thanks.

  Read the article

• Distributed File Systems.

  - by GruffTech

  So, I've been reading several articles around ServerFault as well as google. (For Example, this link) My Requirements are very similar to the link above, however i'd like to also have dynamic or at least resizeable file volumes, so if necessary i can add 4-5 servers to the pool, and then expand the volume. Any Distributed File systems that support that, to save me some time? Thanks! LustreFS will be my next test cluster to build. GlusterFS I've build a 3-machine test GlusterFS cluster, However i quickly became aware of several of its limitations that it doesn't seem to make clearly public. One, i can't seem to resize a volume. Once a volume is created, its done. Which seems retarded, why have a fully scalable file system if i can't scale a volume? So maybe i'm doing something wrong. I'm not sure. AmazonS3 while gives the cheapest startup adds too much cost when broken down to per client per month, so its out. Building my own system when prorated over several years with no bandwidth costs makes it significantly cheaper. MogileFS isn't an option as we'd like this server to be a SAN-Replacement, for storing tons of media from a multitude of systems, which for us means it needs to be POSIX compliant so it can be remotely mounted via NFS or CIFS.

  Read the article

• Melting plastic around DC-in jack in laptop

  - by Ove

  I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

  Read the article

• web application or wep portal

  - by klo

  as title said differences between those 2. I read all the definition and some articles, but I need information about some other aspects. Here is the thing. We want to build a web site that will contain: site, database, uploads, numerous background services that would have to collect information from uploads and from some other sites, parse them etc...I doubt that there are portlets that fits our specific need so we will have to make them our self. So, questions: 1. Deployment ( and difference in cost if possible), is deploying portals much more easier then web app ( java or .net) 2. Server load. Does portal consume much of server power ( and can you strip portal of thing that you do not use) 3. Implementation and developing of portlets. Can u make all the things that you could have done in java or .net? 4. General thoughts of when to use portals and when classic web app. Tnx all in advence...

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >