Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 112/215 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Should I enable "Intel NIC DMA Channels"?

  - by javapowered

  I have HP DL360p Gen8 646902-xx1 I'm trying to optimize my config for low latency trading. Should I enable "Intel NIC DMA Channels"? Will that help/affect my system? From HP doc: Added a new ROM Based Setup Utility (RBSU) Advanced Performance Option menu that allows the user to enable Intel NIC DMA Channels (IOAT). This option is disabled by default. When enabled, certain networking devices may see an improvement in performance by utilizing Intel's DMA engine to offload network activity. Please consult documentation from the network adapter to determine if this feature is supported.

  Read the article

• Does a cable / adaptor for my needs exist? (photos)

  - by Evan

  I recently bought a UPS, however, the only outlets take this sort of connector: But, the other end of the cables is like this (right): The thing is, I really need to connect it to a power bar, so I need a cable that has one end like in the first photo, and the second end like this (right side): I've searched around for quite a while, and asked at a few shops, but cannot seem to find a cable that will fulfill this purpose. This seems crazy to me, as I would think that a UPS wouldn't only be able to be attached to devices that take the relatively obscure output seen on the right side of the second image I posted. Do I need to buy another UPS that has the proper connectors?? Please help!!

  Read the article

• Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

  - by Kristopher Johnson

  I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message indicating that the device could not be accessed. The error code is 0x80070015. I've run Windows Update and Apple Software Update.

  Read the article

• Using Synology NAS attached to WDS-Repeater

  - by Kai B

  I'm using the following devices for my home network: Router 1: Speedport W 723 V (192.168.2.1) Router 2: AVM Fritzbox 3270 (192.168.2.2) NAS: Synology DS 207+(192.168.2.3) I successfully set up a WDS connection between the two routers. The Speedport acts as basestation, the Fritzbox repeats the WIFI signal of the Speedport. Everything fine, so far. Now I'm trying to achieve the following: Client → Speedport (Base) → Fritzbox (Repeater) → Synology NAS I want to use my Synology NAS attached to the Fritzbox (which is in repeating mode). I already gave it a static IP (as written above) but all connection attempts failed. Did I miss something out or is this set-up simply impossible?

  Read the article

• Using Linux LVM, can I change the number of stripes and "rebalance" the logical volume?

  - by mss

  I created a RAID10 by adding two RAID1 md devices as physical volumes to a volume group. Unfortunately it looks like I forgot to specify the number of stripes when I created the logical volumes (it was late): PV VG Fmt Attr PSize PFree /dev/md312 volume lvm2 a- 927.01G 291.01G /dev/md334 volume lvm2 a- 927.01G 927.01G I know that I can move all the data of a logical volume from one physical volume to another with pvmove. It also looks like lvextend supports an -i switch to change the number of stripes. Is there any way to combine these two, ie. change the number of stripes and "rebalance" the data over the stripes based on the allocation policy? According to this mail by Ross Walker from March 2010 it isn't possible but maybe this has changed since then.

  Read the article

• How to delete the history and cache in Opera Mobile (10.1)

  - by Mathias Lin

  I run Opera Mobile 10.1 on Android. My device is rooted. How can I clear the history and cache of the browser via shell? As su, removing /data/data/com.opera.browser/opera/profiles/smartphone/cookies4.dat /data/data/com.opera.browser/opera/profiles/smartphone/cache /data/data/com.opera.browser/opera/profiles/smartphone/cacheO and a /system/xbin/busybox killall -9 com.opera.browser afterwards doesn't seem to do the job. Afterwards, bookmarks etc. are still there. In Opera Mini I found it easy to just delete /data/data/com.opera.mini.android/cache/webviewCache /data/data/com.opera.mini.android/databases but unfortunately, Opera Mini in it's current version has a bug and doesn't work on most devices.

  Read the article

• Linux (or Anaconda) installation, RAID 5

  - by user48058

  I having trouble with installation of Fedora and/or Centos. On first steps of installation, on step What type of devices will your installation involve, whatever I choose, same thing happen: I get window with message An unhandled exception has occurred. This is most likely a bug. Please save a copy of the detailed exception and file a bug report. In Details window there are lots of messages. At the end there are: ERR kernel:[ 81.854179] device-mapper: table: 253:1: raid45: unknown target type WARNING kernel:[ 81.854183] device-mapper: ioctl: error adding target to table Same thing occur with several versions of Fedora (17 and 16, x64, live, etc) and with Centos distribution also. Can you please give me some advices how to avoid this messages? Thank you in advance!

  Read the article

• Troubleshooting PC

  - by srand

  After playing PC games after a few hours I decided to take a break. When I opened up My Computer in Windows 7 I noticed I one of my drives had disappeared. Thinking it was just a glitch, I tried to restart. Upon restart, the BIOS took forever to get through (I didn't notice my disappeared hard drive in the listed drives) and the computer seemed stuck at the "Start Windows" screen. I hard shut down everything. Opened up the case, used canned air to clear the dust out and made sure all devices were snugly in place. I hooked everything up and powered on. This time, after a few seconds the computer restarted (nothing showed up on screen either). After its restart, the computer didn't do anything. The hard drive indicator light was on the whole time. What happened? :( PC Specs: Windows 7, 3GB RAM, Core 2 Duo, 3 Hard drives

  Read the article

• Troubleshooting PC

  - by srand

  After playing PC games after a few hours I decided to take a break. When I opened up My Computer in Windows 7 I noticed I one of my drives had disappeared. Thinking it was just a glitch, I tried to restart. Upon restart, the BIOS took forever to get through (I didn't notice my disappeared hard drive in the listed drives) and the computer seemed stuck at the "Starting Windows" screen. I hard shut down everything. Opened up the case, used canned air to clear the dust out and made sure all devices were snugly in place. I hooked everything up and powered on. This time, after a few seconds the computer restarted (nothing showed up on screen either). After its restart, the computer didn't do anything. The hard drive indicator light was on the whole time. What happened? :( PC Specs: Windows 7, 3GB RAM, Core 2 Duo, 3 Hard drives

  Read the article

• MS SideWinder Force Feedback Wheel under Win7 x64 - steering works but force feedback not

  - by user24752

  I just bought this second-hand ancient but professional steering wheel: Microsoft SideWinder Force Feedback Wheel. I hooked it up to my Win7 x64 machine, it recognized it without installing anything, it did show up in the "Devices and Printers" section. Right-click - I could calibrate it, I could use it under Flatout2 right away. However, force feedback does not seem to work. The steering wheel has a force-button. If I set it using force feedback, it should lit up according to the manual (originally written for Win98). However, instead of lighting up, it blinks. The manual does not associate anything to blinking. I never used any game controllers before on any Windows. Is there a way to check/calibrate force feedback?

  Read the article

• Recommendation for Ethernet switches that allow arbitrary network topologies

  - by sblair

  We have the following requirements for three Ethernet switches that will be connected together: Allow the switches to connect together to form dynamic, arbitrary topologies, i.e., support for the RSTP is essential. Allow the physical topology (which ports are connected together) to be gleaned from the switches, e.g., using SNMP traps. This is optional, but would be very useful. At least 5 ports on each switch, but only 3 will be used for connecting the switches together. Be as compact as possible. Ideally be in stock, in the UK. Only 100Mb/s is required. (This question is the result of the lack of RSTP support from 3Com NJ225 devices, as described in my previous question.)

  Read the article

• Pros and cons IPV6 vs stretched vlans

  - by Jim B

  I'm having a hard time finding information about whether implementing ipv6 or using a stretched vlan is a better option for geographically dispersed sites is better. Does anyone know: Problems with stretched vlans (mac address broadcasting etc) costs for devices to solve those problems pros for using IPv6 instead EDIT. What I am looking for is pros and cons against implementing the equipment required to implement stretched IPv4 vlans vs simply using IPv6 to solve the same problems. Eg admins stretch vlans instead of route because protocol X can't be routed, but IPv6 can encapsulate protocol X so there is no need to worry about that problem.

  Read the article

• Problem with RAID5 (mdadm) - disk detached

  - by poscaman

  Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

  Read the article

• System Rescue CD on multiboot usb not working

  - by darkfeline

  I have a multiboot usb with System Rescue CD and GRUB2 on it. When I try to boot it, it tries to find systemrescuecd/sysrcd.dat, attempts to mount /dev/sr0 and all the partitions on /dev/sda before declaring cannot find systemrescuecd/sysrcd.dat on devices and dumping me onto a primitive shell. The relevant entries in grub.cfg: menuentry "SystemRescueCd 32bit" { linux /systemrescuecd/isolinux/rescuecd rootfs=/systemrescuecd subdir=systemrescuecd dostartx setkmap=us initrd /systemrescuecd/isolinux/initram.igz } menuentry "SystemRescueCd 64bit" { linux /systemrescuecd/isolinux/rescue64 rootfs=/systemrescuecd subdir=systemrescuecd dostartx setkmap=us initrd /systemrescuecd/isolinux/initram.igz } I think the problem is that System Rescue CD cannot see /dev/sdb, which is my usb, but I don't know where to begin to fix it. If it helps, I set up my USB with a utility called MultiSystem, which is like MultiISO for Linux.

  Read the article

• Reconfigure RAID on Dell PowerEdge T710

  - by Stefano Borini

  I have a Dell PowerEdge T710 under my feet at this very moment, with RedHat Enterprise Server 5.3. I have 6 1TB disks and two 500GB. parted reports two devices, one 500 GB and the other 4 TB. So I assume the RAID has been setup as mirror for two disks, and I assume as RAID 5 the remaining ones. I say "I assume" because it does not make sense. Having 6 disks in RAID 5, I should obtain a total space of 5 TB, not 4TB. It's not even RAID 10: I would end up with a 3 TB unit. How can I check and eventually modify the RAID array definition? In the Fujitsu Siemens I played with some time ago, at boot I had the chance to enter the controller BIOS, but here I don't see a clear way to perform this operation.

  Read the article

• Windows 7 random black screen when idle

  - by Omar

  Occasionally, when I'm away from my computer for about 5 minutes, the computer screen will go black and all USB devices (keyboard/mouse) will lose power. Attempting to move the mouse or pressing keys does not 'wake up' the computer. This only started happening a few days ago but I'm not sure what changes I did could have caused this and I uninstalled programs (one by one) I installed before it started happening, but still having the same issue. The one thing I noticed different about my computer since it started happening is i've been getting random survey popups from www.insightexpress.com. I ran Microsoft Security Essentials scan, it picked up some Java related malware, I removed it but still the same issue. I'm running MBAM right now and will run SAS after.

  Read the article

• Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

  - by Newb

  I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

  Read the article

• Enabling media streaming from a removable drive using Windows Media Player

  - by Simon Hartcher

  I have Windows Media Player set up to stream video to several devices in my apartment. I had recently run out of space so I purchased an external drive to store my videos/music etc. I can add the media to my WMP library and play it locally without issue. As soon as I try to access the media from another device that supports media streaming (Media player or another PC) only the media stored on a fixed drive is available. Is there a way to enable media sharing from a removable drive or somehow trick WMP that the media is stored on a fixed drive? I tried setting up a SymLink linking a directory on the fixed drive to the removable one but with the same result.

  Read the article

• Iptables setup for PPTP server and UPnP on clients [on hold]

  - by SPYke

  I have a Debian server with one static external IP. It has PPTP server installed. Local IP is 192.168.1.200 and remote IPs are 192.168.1.201-209. I have several users, who connect to my server using their routers through the Internet. VPN work flawlessly. Routers have UPnP enabled, but devices, that use UPnP, are reporting no UPnP available. What rules do I need in iptables to make it work? Thanks.

  Read the article

• DD-WRT with native IPv6

  - by Matt

  My ISP provides native IPv6 support (ie. I can plug in my computer straight into the WAN and get an IPv6 address). However I can not get this working on DD-WRT. When I enable IPv6 and radvd in DD-WRT, the router gets in IPv6 address, but the devices on my LAN do not. I tried looking at the DD-WRT wiki, but this only displayed instructions for tunneling or other methods where native support isn't available. I found a small amount of sites thorough searching, but none of the methods these sites described gave my computers each a global IPv6 address. In addition, SSHing into the router using ping6 on sites such as ipv6.google.com causes "host unreachable" errors. Has anyone using DD-WRT configured a successful setup with native IPv6? I am using a Netgear WNDR3700 v2, with DD-WRT build 17201

  Read the article

• Keep getting invalid IP via WiFi

  - by nmuntz

  There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

  Read the article

• WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

  - by christian

  I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

  Read the article

• Monitoring Bandwidth Usage (Per Internal IP) - Cisco ASA 5505

  - by Joseph Sturtevant

  I manage a small network with a Cisco ASA 5505 and a shared DSL connection. I would like to be able monitor the bandwidth usage of the various users/devices on my network (by IP). Can I do that using the ASA? Has anyone got this working? What is the best way to do this? Some Ideas I Have Seen Online: SNMP with a tool like Cacti Does this give per IP usage with an ASA or just overall usage? Netflow with a tool like ntop Couldn't get this to work. It seems that the Netflows sent by ASA are not exactly standard. Ntop receives them, but doesn't seem to know what do with them.

  Read the article

• DD-WRT Router acting as a Switch and Wi-Fi AP

  - by dotnetchris

  Recently I upgraded to Comcast Business and their modem has a built-in router so I took off my DD-WRT router and moved to a location in my home where I needed more ports and Wi-Fi (preferably without running new Ethernet cables since it's 50-100 foot run through floor and ceilings). I have my network cable from my Comcast modem going into Port 1 of my DD-WRT router with Port 2 and 3 being networked PCs. I have DD-WRT setup as a DHCP forwarder with the firewall disabled. This lets my all of my devices access the network fine. Is the correct the way to do this? Or is this a less optimal solution and it should be done in a slightly different way?

  Read the article

• What happens when the USB key or SD card I've installed VMware ESXi on fails?

  - by ewwhite

  An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >