Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 114/215 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• SpinRite and USB blues - does a solution exist?

  - by Peter Mortensen

  I use SpinRite to recover hard disks and their content, and to a lesser degree for preventive maintenance. However, if a USB drive (USB thumb drive and/or external hard disk with a USB interface) is connected when SpinRite scans for devices, then SpinRite never finishes/hangs. The work-around is of course to disconnect the drive, but there is value in being able to use SpinRite on USB drives. Some external drives have no screws and it is difficult to take out the hard disk without damaging the casing. And for those that have it would save the disassembling time. Is there a way to fix this problem (e.g. BIOS changes or a modified SpinRite boot CD) without resorting to floppy disks?

  Read the article

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• Scanner Installation: Epson Perfection 3170 Photo, Windows 7 & Adobe Acrobat

  - by Galaxy5727

  I installed the Driver v3.04A from Epson's Web site -- epson12180.exe that is supposedly for Windows 7. Now, the scanner works by itself, i.e. if I hit the scan button I get a dialog menu and can scan with one of the options there but not with Adobe Acrobat. What I need is to have it working from Adobe Acrobat when I go File - Create PDF - From Scanner - Custom Scan... The current state is that I see Scanner: "Please select a device" and no other available devices. I remember I used to see at least 2 other like "WIA Epson Perfection" and smth like "Epson Perfection". "WIA Epson Perfection" is the option that I am hoping to see to move on. Scanner: Epson Perfection 3170 Photo System: Windows 7, 64-bit Software: Adobe Acrobat 9 Pro

  Read the article

• Is is possible to change MAC address of a WiMAX USB adapter?

  - by Salman A

  Wondering if it is possible to change the MAC address of a WiMAX USB adapter (read WiMAX, not Wi-Fi) manufactured by Motorola, ZTE, Intel etc. I've tried a few tools that did changed the MAC address of the adapter to another valid MAC address (that I coped from another equipment made by same company) but then I was not able to connect to the network, the connection software took long time stating "obtaining IP address"; then few seconds after it got one said "lost IP address". Wondering if changing MAC address of such devices actually work.

  Read the article

• How to know which block device maps to which physical drive

  - by Karolis T.

  I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

  Read the article

• How do you sync tabs between computers with Mozilla Firefox Sync?

  - by 1.21 gigawatts

  Mozilla says that with Firefox Sync if you are working on one computer with 5 tabs open you can then switch to another computer or device and Sync can or will update the second computer with those tabs. How do I do this? BACKGROUND I have setup Firefox Sync on both devices and they have been synced. How do you sync them again? Is it automatically syncing them in the background? How often? How do you sync the tabs? Are the passwords synced? Documentation The documentation below describes how to add another device or computer to Sync. It says that when you add the device it syncs it. But it doesn't describe how and when it keeps it in sync or how to sync the tabs. [1] http://support.mozilla.org/en-US/kb/what-firefox-sync

  Read the article

• SNMP based network discovery (switches), device (ports on switches) power management

  - by SaM

  In a enterprise network, what would be the right way to generate a list of switches (SNMP managed) Is it reasonable to ask the organization to supply a list such as this: Switch name IP Address of switch Location SNMP community strings Or are there standard ways to run discovery scans - UDP broadcasts? After having generated a repository such as the above; given a single switch, how to query it for the list of all devices attached to it? Finally, how to selectively power down/power up ports? (remotely - using SNMP) Platform is going to be .NET based (C#) and the library being used is SharpSNMP

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• How do you enable syslogd to accept incoming connections on Snow Leopard from remote loggers?

  - by Emmel

  How do I get syslogd to accept incoming connections from remote hosts on Snow Leopard? I'd like to centralize logging such that various devices and systems send logs to Snow Leopard's syslogd, which normally hangs out on UDP 514. However, I'm unable to get them to successfully be accepted by good ole syslogd. I tcpdumped on the Snow Leopard box to verify that packets are being spouted to port 514 -- they are. I checked that syslogd is listening on 514 -- it's not. Googling around told me that, on older versions of OSX (don't you love the way things change so rapidly on OSX), one just had to add a flag to the syslogd daemon to allow remote; one did this in com.apple.syslogd.plist. However the syslogd daemon has no flags (at least in its man page) that suggests any remote anything. What's the solution to this? Secondary, less import but relevant question: What's 'newsyslog'? I see a plist file but it's not running (apparently). Thanks

  Read the article

• Can single ESXi host make use of two separete iSCSI box?

  - by user71061

  Hi! I have problem with using multiply iSCSI targets with single ESXi host (in my case they are two FreeNAS hosts, but I suspect that this problem will occur with any two iSCSI box of that same type/model). If I configure two FreeNAS hosts as iSCSI targets (say iSCSI A and iSCSI B), then I can use both of them with my ESXi host, but only one at a time (i.e only iSCSI A or only iSCSI B, but not both of them simultaneously). If I try to add second iSCSI target to my iSCSI adapter (of course it has unique iqn name), then in a details pane of this adapter (it is iSCSI software adapter), I see that total number of paths has increased accordingly, but not total number of devices (so I can't use it as another storage). What should I do? It is impossible to attach two iSCSI targets to single adapter? I'm using free version of ESXi 4.1. Maybe it is an limitation of free version? Thanks in advance for any sugestion.

  Read the article

• Is there any multi-touch graphics tablet with Linux drivers?

  - by Zifre

  After watching the absolutely amazing 10/GUI video, I have been dying to try to implement something like this. I can do the software side quite easily, but I don't have the hardware. The Wacom Bamboo Fun would work, but the Linux drivers don't support the multi-touch features. Microsoft's "UnMouse Pad" looks like the perfect solution, but it is not commercially available yet. Are there any similar devices that would work? Alternatively, is there a way to build a DIY version? (It is fairly easy to build a multi-touch display with a webcam and IR LEDs, but it would not be pressure sensitive. Does anyone have any info on how the UnMouse Pad works and if it is possible to build one?) EDIT: I should clarify that I don't want a multi-touch display. I want the sensor to be separate from the display. If that sounds crazy, watch the 10/GUI video.

  Read the article

• Layer 2 topology discovery

  - by pegah s

  I have been given a network (it is a LAN) comprised of switches and I need to discover the topology of that. (There may be Link Aggregation Groups (LAGs) in the network as well.) I have done a lot of search on layer 2 topology discovery and I have seen many articles talking about using SNMP MIBs or LLDP (I do not know which one is better or more practical, but all devices in my network support SNMP). But my problem is that I cannot find "the software to install and run" to actually see the topology map. I would really appreciate if someone could send me the website where I can download the code and use it. I have also found a lot of tools available online such as OpenNMS, Nagios, The Dude, LANsurveyor, SNMPwalk, and many more... But I cannot figure out which one is the best to pick. To summarize: what is the easiest simplest way to discover the layer 2 network topology?

  Read the article

• Ubuntu Server on Proliant ML350 G4

  - by eduardoavdr

  Hi Everyone, I have been given the task to change OS of a HP Proliant ML350 G4 server, and I decided to use Ubuntu server edition for that matter. The thing is that the server has already installed Windows server 2000 on the only Hard drive it has (SCSI). My question is, could I install an IDE HD on the IDE connection it has and install ubuntu without overwritting the boot configuration, so if I wanted to go back to the windows 2000 server installation with no problems? It also has a tape drive which is used for backups. Do you guys know how buntu deals with such devices? Thanks for your time

  Read the article

• Using ethernet cables?

  - by Farhad Yusufali

  I have an HDTV which supports internet connectivity through an ethernet port or wirelessly (but this requires an additional wireless USB adapter, which I don't have). I also have a blue ray player than supports internet connectivity through an ethernet port or wirelessly (natively - no other devices are needed). I want to connect my TV to the internet but my router is too far away. My blueray player however is already connected wirelessly. If I connected my TV to my Blueray player via ethernet, would my TV be able to connect to the internet? To clarify: Wireless Signal - Blue Ray Player - Ethernet Cable - TV Would this work?

  Read the article

• Good HDMI splitter/switch solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter/switch do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• Does any know fix/cause of USB drives that lose connection

  - by Burch Kealey

  I have been having significant problems trying to copy files to a USB drive (G0-Flex 1.5 tb) No matter what I use to try to copy the files (python code, Windows copy and paste or Drobo Copy utility) I ultimately get a failure. The failure is always some indication that the device is not ready or able to be written to. I am pretty sure the problem is that the drive is losing its connection. I have done everything I can find so far including setting the USB Root hub to never turn off the power, I updated some usb drivers etc. I have found references to this problem primarily with Win7-64 bit. I have also had USB connection problems with other devices- we kept losing a connection to our Bravo Disc Publisher when we went to Win7 and finally bought a newer model and have not had problems since. Any pointers about diagnosing and or understanding the problem would be appreciated.

  Read the article

• NAS + XBMC combination

  - by Hendrik

  I currently own a WD Sharespace and I am not too happy about it. It will freeze constantly and its rather slow. I've been thinking of replacing it. I also own a WD HD Live, and it works like it is supposed to, but recently I've seen XBMC in action and I was quite impressed. I've been wondering lately about the possibility of replacing both products with one new device: a fast reliable nas which I can install XBMC on and is capable of rendering video and has an HDMI out. Do any such devices exist for sale or is the only way to build one from scratch? I've seen HTPC's for sale but I've never seen any of them with a raid setup. I've also read about building your own NAS with freeNAS but those setups dont allow you to run XBMC. Does anyone have experience with this?

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• DSL connection dropping when starting game

  - by bootoo

  New connection set up last week - have called tech support, signal fine, sending out tech guy tomorrow - however i cant make sense of this using Vista, 2wire connection 6mb ATT conn, wireless, i can browse website, stream video from my PC wirelessly to my xbox, watch Hulu in high res, connection seems fine I load up World of Warcraft, i select Enter World and without fail my 2wire modem 'DSL' light goes red, my internet light goes out, im no longer connected, then after 10 or 15 seconds it works again, but game has kicked me Noticed the same thing on opening or closing Utorrent as well No other phones/devices plugged into the phone jacks in the apartment - why would joining a game cause my DSL to drop? i can only guess it throws a bunch of information to the server when i hit 'enter world' and that causes an issue that shuts my connection down or my router hates me - all help appreciated

  Read the article

• Path of md device wrong after reboot

  - by flammi88

  I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that drive) 2 TB Sata hdd (first disk in raid array, data disk) 2 TB Sata hdd (second data disk) I created one partition on every data disk with the type Linux raid autodetect. In the second step I created the raid1 with the following command: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1 After that, I added the array to the mdconf: mdadm --examine --scan >> /etc/mdadm/mdadm.conf The problem is: After a reboot the array is not available on the path /dev/md0. Instead of that it gets reassembled as /dev/md/0 but it is not very reliable. Has anybody a solution for this issue?

  Read the article

• RAID FS detection at boot time

  - by alex

  An excerpt from dmesg: md: Autodetecting RAID arrays. md: Scanned 2 and added 2 devices. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md1 md: bind<sda1> md: bind<sdb1> md: running: <sdb1><sda1> raid1: raid set md1 active with 2 out of 2 mirrors md1: detected capacity change from 0 to 1500299198464 md: ... autorun DONE. md1: unknown partition table EXT3-fs (md1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (md1): error: couldn't mount because of unsupported optional features (240) EXT4-fs (md1): mounted filesystem with ordered data mode Is it OK that kernel tries to mount an ext4 raid as ext3, ext2 first? Is there a way to tell it to skip those two steps? Just in case: /dev/md1 / ext4 noatime 0 1 TIA.

  Read the article

• logparser Message with error codes

  - by nsr81

  Hi All, Is there anyway to get complete error message using LogParser? When I run the following query: logparser -i:EVT -o:NAT "SELECT TimeGenerated,EventID,Message from System WHERE EventTypeName='Error event'" I get the following output: 2009-09-02 19:35:44 7000 The USB Mass Storage Driver service failed to start due to the following error: %%1058 The full "Message" in EventViewer is: Description: The USB Mass Storage Driver service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. How can I obtain complete message using logparser?

  Read the article

• Windows 7 won't load unless other harddrives "disconnect"ed in UEFI shell

  - by lmz

  I have three disks, one GPT partitioned containing Windows 7 and Debian, the other MBR partitioned containing CentOS, and the other one MBR partitioned, empty. It used to work (loading Windows boot manager using rEFIt) but now after installing CentOS and OpenIndiana on the second drive, Windows won't boot. The logo is displayed briefly and then a text mode scrollbar "Loading files", then back to the rEFIt menu. The only thing that makes it work is if I drop into the UEFI shell and run disconnect XX where XX is the device handle of the other hard drives (obtained from running devices). This makes me think that the bootloader is getting confused about where the Windows partition is. Is there any information on how the Windows UEFI boot loader finds the Windows partition, or is there any logging I can turn on to help troubleshoot this issue?

  Read the article

• How to Shutdown PC by Pressing Power Button without asking "Force Close"?

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice, one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

• Linksys WRT54G2 not showing connected PC's in DHCP table

  - by Moose

  For some reason all of a sudden my linksys WRT54G2 no longer shows PC's connected in the DHCP table. It was being touchy then all of a sudden they all just disappeared. It showed 2 of the 4 connected then it showed the other 2 then it only showed 1 and then it was showing none. I seem to be having a connection reset every 30-60 minutes also not sure if that is related to the router going bad or if it is just comcast being it's typical crappy self. I have tried to reset my router and my cable modem and both problems still seem to keep happening(no PC's in table and connection reset every 30-60 mins). Now I know the router doesn't store clients after a router reboot but they normally show up within a matter of minutes for me in the past. Before anyone asks yes all devices on the network are using DHCP and not static. Could this be a sign of the router starting to go bad?

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >