Search Results

Search found 8949 results on 358 pages for 'eee pc'.

Page 112/358 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

  • Locking down firmware to keep stolen laptop from being formatted?

    - by Matt Ridge
    On the Mac laptops there are ways through the terminal to lock down the computer so that if someone tries to format the computer they won't be able to do it without the password. This way locks down the firmware. Is there a universal way to do the same thing on a PC? I know there are brands out there such as Samsung, Dell, etc that utilize different fimware types, and in turn will mean that their firmware will be locked down differently. That being said is there a "command code" that will allow you to lock the firmware to keep theives from formatting the hard drive and wiping out your data? I know a person who has time, and knowledge can get any password, and hopefully the person is smart enough to use another password to lock down the firmware, but that's not what I'm asking. I'm asking if it's possible, and if so how? Does the standard PC user require a 3rd party app, or can it be done through the command line? Or Terminal if you are on Linux?

    Read the article

  • Graphic Setup tune-up checklist

    - by Click Ok
    I was trying to play the game Warzone 2100 and the games runs fine, with nice speed, but the screen stays with a horizontal lines "flickering"... My PC have a integrated GeForce Go 6100 vga. Ok, not a powerfull vga, but it's not the end of the world to run a "simple" game like this (compared with another games that ask you send your eyes to purchase a expensive vga). So, I think that the problem can be of the configuration of my machine. I use it in first instance for programming jobs, so I underpay attention to video setup. I would like about a checklist to know if my PC is "ready" to games. By example, I know that I need: Lastest vga drivers Updated DirectX and OpenGL What you suggest? There is too some good programs to test performance and suggests improvements in the system? Thank you! PS: I'm using Windows 7

    Read the article

  • Remote Access Without Explicit Permission: Convenience or Liability?

    - by routeNpingme
    For outsourced professional IT remote support, one habit most new technicians get into is the "instead of getting the user to start up remote support each time, I'll go ahead and install LogMeIn / GoToMyPC / Remote Desktop / whatever so that if they call again, I can just jump on and help them". This of course opens up a potential liability because a client PC on a network that we don't own is being accessed without a user explicitly providing permission by clicking a "Yes, allow technician to control my PC" option. I realize the rules totally change when you're an IT admin over a network that you "own", but this is outsourced IT support. Just curious what others' policies are. Is this an acceptable practice for convenience and I'm turning into one of those "security is more important than anything" people, or is this really a liability?

    Read the article

  • pptp VPN, routing

    - by Adrian
    Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

    Read the article

  • What does an ACPI BIOS configure during boot?

    - by RJSmith92
    When a PC boots with an ACPI BIOS, what does it exactly do? I understand that the point of ACPI is to allow the OS to control hardware resources and power management but before the OS is loaded does ACPI configure just the devices needed to boot and then let the OS configure the rest? If the OS wants to re-asign hardware resources does it store this information in the ACPI tables so that the next time the system is booted it assigns them how the OS wants? The ACPI driver asks the PCI bus driver (Pci.sys) to enumerate devices on it's bus once the OS is loaded, how are these devices configured whilst the PC is booting when it doesn't have other bus drivers? Any help with any of the above questions would be greatly appreciated. Thanks.

    Read the article

  • Access my router's gateway network?

    - by Danpe
    I have 2 routers in my place. Main Router (Connected to the Internet) - 192.168.1.1 Secondery Router (Connected to the Main Router) - 192.168.0.1 I have a Network Storage Device and few Shared Directorys connected to the Main Router. (Network Storage - 192.168.1.16) How can i acces one of them using a PC connected to the Secondery Router? Home Network Diagram: I currently have access to the internet using both laptop and Main PC. But i want to get access from my laptop to the Storage and to ym shared directorys. The problem is the my Main router always forwards all packets stright to the WAN.. (Internet)

    Read the article

  • "System volume folder" always appearing in USB storage stick

    - by ?????? Oyewole
    Whenever I move or copy video files from the PC (Windows 8.1) to my USB storage device and plug it into my TV, I always see a system volume folder on the USB device. This folder can be seen on the PC also, if I choose "view protected system files". My flash drive is formatted with a FAT32 file system. The question is, why is this happening on Windows 8.1, since I never had this problem on Windows 8 before upgrading, and how can I disable this feature?    OK, that's two questions.

    Read the article

  • Vista to Vista network visability issue

    - by Sk93
    Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

    Read the article

  • Custom grub config hangs at the prompt

    - by drecute
    Please I need help with this custom grub: default=0 timeout=20 fallback=1 title Remote Install root (hd0,0) kernel /vmlinuz_remote lang=en_US keymap=us ks=nfs:192.168.128.42:/tftpboot/Kickstart/ks.cfg ksdevice=00:1A:64:22:32:4B headless xfs panic=60 initrd /initrd_remote.img I have 3 grub configs and I've been able to make the "Remote install" grub config to be the default run. At the moment it boots up but hangs at the prompt. Grub version: 0.98 The other 2 grubs that comes that exists after successful installation and update of the kernel are: splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-279.9.1.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-279.9.1.el6.x86_64 ro root=/dev/mapper/vg_serverprisa-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_serverprisa/lv_swap rd_NO_MD rd_LVM_LV=vg_serverprisa/lv_root SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-279.9.1.el6.x86_64.img title CentOS (2.6.32-279.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-279.el6.x86_64 ro root=/dev/mapper/vg_serverprisa-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_serverprisa/lv_swap rd_NO_MD rd_LVM_LV=vg_serverprisa/lv_root SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-279.el6.x86_64.img

    Read the article

  • Sound card doesn't work and yet does.

    - by Xeoncross
    I have a really weird one tonight. Today we had a LAN party and all of a sudden the sound on a couple PC's stopped working for programs like the games, windows media player, etc. However, when errors would popup (like trying to change the volume settings) you would here the default error chime. Restarting the computers you would here the logoff-login sounds and after a restart the sound would work for a bit in both games and apps and then suddenly stop. Restarting also didn't always fix the problem. I can't figure this out. If the sound card/driver didn't work then how could we hear sounds from the windows sound scheme? No sound with VLC, windows media player, youtube, games, nothing. The only thing I can figure out is that this is a bad game crashing the primary driver or some kind of weird virus these PC's might have picked up.

    Read the article

  • ShoreTel 230 phone calls from website

    - by Michael Irey
    Our company uses these fancy ShoreTel 230 phones. We make many phone calls from our custom built web based contact management system. It would be nice if our employees could click on a phone number from a webpage and have it automatically start dialing the number. (Similar to how iPhone handles this) Anyone every deploy something like this? I would imagine it would require some kind of background running ShoreTel process to accommodate this. 90% of our employees use PC (Windows 7) 10% use OS X Even a PC only solution would be great. Is this even possible and if so, where should one begin? Thanks!

    Read the article

  • "The program is too big to fit in memory" problem?!!

    - by user47038
    Please help me!!! This is most amazing error that i have ever had, we write 100 CD, in these CDs we got one setup.exe file that autorun. in some of these CDs when I explore the cd the setup.exe file become the command prompt file and give me above error. and when I reset the system and put it in another pc it`s ok. if I reset the first pc the autorun.exe run. so I change it different computer, randomly get this problem. I am sure about the virus, because I checked on different pcs and with fully update definition so someone tell me what happen?

    Read the article

  • My WD Caviar Green SATA HDD cannot be detected

    - by obhasha
    I have a WD 2TB Caviar Green SATA HDD. I used it as an external hard drive formatted to FAT32. The main purpose was to store my PS3 games. It worked fine and all of a sudden my PS3 stopped detecting it. I tried connecting it to my pc and the same result. I took it off from the enclosure and plugged it directly to my PC and used the BIOS setup. The BIOS setup detects my HDD but it says it's 0.0MB!!! I also tried the WD Data Lifeguard Diagnostic tool and it wasn't much of use because the drive is not picking up by windows at all. Is my HDD dead? Is it beyond repair?

    Read the article

  • What are the most likely bottlenecks determining the performance of CamStudio screen recording?

    - by Steve314
    When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

    Read the article

  • Display Resolution Getting Changed Automatically (sometimes) - Win7x64 - Asus M3A78-EM

    - by kamleshrao
    AMD PC Motherboard - Asus M3A78-EM (installed VGA drivers from Asus website - AMD_VGA_V863200_XPVistaWin7.zip) It has VGA and HDMI inbuilt ports (ATI Radeon HD 3200 Graphics 256MB) VGA is connected to my ViewSonic Monitor. HDMI is connected to LG LCD TV OS - Windows 7 x64 Ultimate Sometimes, when I reboot/start my PC, my ViewSonic display resolution changes and does not show the recommended value(1440x900) in Resolution Settings. The HDMI display works well always. But after multiple reboots/starts, the problem gets fixed automatically and I get back my recommended resolution on ViewSonic display. I am not making any changes to the existing drivers. It sometimes work well, and sometimes doesn't work. Can someone assist me resolving this permanently.

    Read the article

  • Toshiba Equium A110-252 laptop won't boot Windows.

    - by Drew Gibson
    I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

    Read the article

  • System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

    - by MGOwen
    Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

    Read the article

  • Remote Desktop to a user while still logged on

    - by Jonathan
    Is there a way to connect remotely to another user while there is a user still on the same PC. So one PC with users and both of them logged in at the same time, one locally and one remotely? Sorry i didn't explain my question very well, I don't mean 2 users viewing the same screen. I mean 2 user accounts. Say UserA is sitting at the desk on his account. and then UserB is on his account account but it remotely connecting to it. So they both have different desktops in front on their respective screens.

    Read the article

  • win2003 server problem

    - by Tavo
    I used to have a server with win2000 OS. Yesteday I updated it to win2003 server R2 service pack 2. My problem now is that in a particular moment nobody can access the server. All of the shared resource of the server are unavailable. The only solution is to restart the server although the server is running fine. I don't think that is a connection problem of the LAN, because with the win2000 this problem didn't happend. The PC is connected to the same switch and the PC have the same exact hardware.

    Read the article

  • Very slow accessing printer shared from Windows Machine

    - by Tarski
    How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

    Read the article

  • What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

    - by jonathanconway
    I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

    Read the article

  • Can I create a virtual network interface to connect to a real network device?

    - by michelemarcon
    I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

    Read the article

  • How to prevent Windows from doing this

    - by Murtaza
    I am using Windows 7 Professional 64bit. This is my webcam. It is first time using this webcam in my pc. It's name is A4tech - PK-331F. When I plugged that webcam, windows start installing drivers automatically but unfortunately it installed wrong drivers. The drivers Windows 7 installed are Vimicro USB 2.0 PC Camera (Venus) and these drivers aren't related to this webcam. Now I did some modifications to windows so it isn't installing drivers automatically but whenever I plug that webcam but same name of drivers and doesn't install it. I think because of it, I can't install it's original drivers. I don't want Windows recognize this webcam with this name. How can I prevent Windows from doing this?.

    Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >