Search Results

Search found 10406 results on 417 pages for 'device'.

Page 115/417 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

  • External USB HD issues with a twist (works on Windows7 but not XP)

    - by Eruditass
    I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

    Read the article

  • How to power a serial port under linux?

    - by Lex
    I got a serial to ethernet device connected to a Serial (COM) port on a Linux machine (debian etch), I connected it correctly but it did not power up, I suppose I need to power the device port, anyone knows how to power it under linux? Thankyou in advance.

    Read the article

  • Installing Intel Iris Drivers on Parallels 9

    - by Eren Yildirim
    I'm running windows 8.1 on Parallels 9 on Mac OS X 10.9.3 Mavericks. Before that I used to have VMWare and I could manage to install Intel Iris drivers for OpenCL SDK. But Parallels installs tools for virtualization I guess and in device manager I see Parallels Display Adapter (VDDM) instead of Intel Iris Graphics Processor. How can I see the device and be able to install latest Intel drivers so that I can Install Intel OpenCL SDK. Thank you.

    Read the article

  • Windows recording in Vista

    - by devoured elysium
    I want to record the sound that's coming from my applications in Windows Vista. The problem seems to be that Vista seems to only recognize the microphone as input device. Is there any reason for this? I went to Control Panel Sound and I can only see the microphone as recording device. Im using a TX2000 HP laptop. Thanks

    Read the article

  • Ubuntu 12, limit the resolution to 640x480

    - by TimothyP
    How can I set and limit the resolution in Ubuntu 12 to 640x480 There's not much in the xorg.conf file anymore, so I'm guessing this is no longer the place to do it? I can't do it using the GUI either because it doesn't show me the 640x480 option. While setting the resolution the computer is connected to a normal screen but later it will be connected to a screen that only supports 640x480 and doesn't report its supported modes to the computer. The only thing in my xorg.conf (by default) is this: Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection

    Read the article

  • No Telnet login prompt when used over SSH tunnel

    - by SCO
    Hi there ! I have a device, let's call it d1, runnning a lightweight Linux. This device is NATed by my internet box/router, hence not reachable from the Internet. That device runs a telnet daemon on it, and only has root as user (no pwd). Its ip address is 192.168.0.126 on the private network. From the private network (let's say 192.168.0.x), I can do: telnet 192.168.0.126 Where 192.168.0.126 is the IP address in the private network. This works correctly. However, to allow administration, I'd need to access that device from outside of that private network. Hence, I created an SSH tunnel like this on d1 : ssh -R 4455:localhost:23 ussh@s1 s1 is a server somewhere in the private network (but this is for testing purposes only, it will endup somewhere in the Internet), running a standard Linux distro and on which I created a user called 'ussh'. s1 IP address is 192.168.0.48. When I 'telnet' with the following, let's say from c1, 192.168.0.19 : telnet -l root s1 4455 I get : Trying 192.168.0.48... Connected to 192.168.0.48. Escape character is '^]'. Connection closed by foreign host . The connection is closed after roughly 30 seconds, and I didn't log. I tried without the -l switch, without any success. I tried to 'telnet' with IP addresses instead of names to avoid reverse DNS issues (although I added to d1 /etc/hosts a line refering to s1 IP/name, just in case), no success. I tried on another port than 4455, no success. I gathered Wireshark logs from s1. I can see : s1 sends SSH data to c1, c1 ACK s1 performs an AAAA DNS request for c1, gets only the Authoritave nameservers. s1 performs an A DNS request, then gets c1's IP address s1 sends a SYN packet to c1, c1 replies with a RST/ACK s1 sends a SYN to c1, C1 RST/ACK (?) After 0.8 seconds, c1 sends a SYN to s1, s1 SYN/ACK and then c1 ACK s1 sends SSH content to d1, d1 sends an ACK back to s1 s1 retries AAAA and A DNS requests After 5 seconds, s1 retries a SYN to c1, once again it is RST/ACKed by c1. This is repeated 3 more times. The last five packets : d1 sends SSH content to s1, s1 sends ACK and FIN/ACK to c1, c1 replies with FIN/ACK, s1 sends ACK to c1. The connection seems to be closed by the telnet daemon after 22 seconds. AFAIK, there is no way to decode the SSH stream, so I'm really stuck here ... Any ideas ? Thank you !

    Read the article

  • Running resize2fs on /

    - by Paul Steckler
    I'm trying to resize an ext4 filesystem on a Fedora 11 box. Using fsdisk and lvm, I was able to grow the partition and logical volume containing the filesystem. When I try to run resize2fs on the device containing the filesystem (/dev/sda2 in this case), I get: "Device or resource busy while trying to open /dev/sda2, Couldn't find valid filesystem superblock" I've tried this from a rescue disk that doesn't have the filesystem mounted, no joy. Maybe resize2fs doesn't know about ext4?

    Read the article

  • Can two Identical devices be present on the same bus in any PCI Topology

    - by vaibbhav
    As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

    Read the article

  • Can two Identical devices be present on the same bus in any PCI Topology

    - by vaibbhav
    As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

    Read the article

  • Get caller id and append to url in browser automatically

    - by timbad2021
    I am trying to find a caller id device/program that will automatically open a browser and append the incoming phone number to a url when receiving a call. For example: https://www.myphonesearchapp.com/search?q=5733655593 This would probably be a usb device that you would run a phone line through that will get caller id and allow you to set custom commands like append the number to a url and launching it in a Browser. Thanks!

    Read the article

  • Redhat linux terminal garbage output when using telnet

    - by Dinesh
    I am using redhat-linux terminal to connect to a router device by means of 'telnet'. While the device boots, the characters are getting printed in garbage manner which is as follows, In terminal, If I click on the the menu 'Terminal'-- 'Reset', then it is getting changed to proper alphabetical. Is there any way available to prevent it ? I have tried setting the encoding of the terminal to UTF-8 from the menu options. But, still the same issue.

    Read the article

  • "System cannot find the file specified" trying to reinstall network driver.

    - by Justin Love
    After uninstalling Symantec Enpoint Protection (manually) one computer (Windows XP) has an inoperative NIC; it shows up in device manager as conflicted. I tried doing a windows repair from CD, which did not improve the situation. When I went to reinstall the drivers, driver installation failed with: Cannot install this hardware The system cannot find the file specified I've deleted the NIC in device manager without improvement.

    Read the article

  • External USB disk drive cannot be remounted in Windows XP

    - by jackhab
    I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

    Read the article

  • A PCI-to-PCI bridge cannot start

    - by midtiby
    Hi I'm trying to use a DeLock PCMCIA adapter, CardBus to 2 x FireWire to get firewire connectivity on my laptop. It worked a few weeks ago, but now I get the message. "This device cannot start (Code 10)" when I look it up in Device manager. Any ideas of how to get it up and running? I am running Windows XP SP3

    Read the article

  • How to stop Time Machine on Mac use of removable disk?

    - by ablmf
    One of my friend recently bought a Mac and somehow when she connect her removable disk to the computer, Time Machine took control of this device uses it as backup device automatically -- she could not use the disk for other purpose any more. When we connect it to windows, it could not be recognize any more. How can we get it back under control?

    Read the article

  • Windows XP doesn't recognize iPhone as a camera

    - by ines
    My iPhone 3GS doesn´t show up in the Scanners and Cameras tool when I connect it via USB to Windows XP. Nor does the Camera Wizard pop up. How do I make Windows XP detect the device as a Camera? I currently have no way of downloading photos from the iPhone to my computer. iTunes does recognize the device, but it doesn't offer a way to synchronize photos. Thanks for your help.

    Read the article

  • How to mount a USB thumb drive as "Fixed" instead of "Removable"

    - by AMissico
    I have over 8 GB in my "Code Library" that I maintain on a 64 GB ScanDisk Ultra Backup USB Device. Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot, because the USB device identifies itself as a Removable drive and Windows 7 refuses to index removable drives. How can I mount the USB Thumb Drive as Fixed instead of Removable?

    Read the article

  • Sending ASCII characters on Mac USB/RS232 cable

    - by Olivier
    Hello, I have a RS232C/USB cable to connect an electronic device to my iMac Intel (MacOSX SnowLeo 10.6.3). Is there a utility program that allows for sending ASCII characters on the USB port that the RS232C device will understand? If possible, I'd rather avoid programming. I'd prefer an Automator script or a simple program with a GUI. Thanks

    Read the article

  • Citrix XenDesktop create an image to work across multiple hardware devices

    - by JohnyV
    I have created an image using this guide http://support.citrix.com/article/CTX119877. However this only works for virtual and the model that I made the image on how can i extend compatibility to another device? I am just using it for a vdisk that I can then also use as a virtual device but I wasnt the vdisk to be available over multiple devices. Using Win 7 on the client. Thanks

    Read the article

  • What is the default mount point on Linux systems (all)?

    - by Vijay Sharma
    My question is very basic in nature. Is the mount point for external media (like USB) always /media? Because in a Debian system, if I plug in any USB device that goes to the /media folder. So is it the case with all the other Linux flavors like Fedora, Ubuntu, etc. If a USB device is automatically mounted will it always go to the /media directory?

    Read the article

  • Is "Turn Off Windows write-cache buffer flushing" safe on a laptop?

    - by Earlz
    my laptop's internal harddrive is a bit slow. I looked at the drive properties and there are two options: [X] Enable write caching on the device [ ] Turn off windows write-cache buffer flushing on the device As you can see, the first option is checked already, but the second option isn't. I've heard the second option can really speed things up, but it also sounds very risky. Is it safe to do on a laptop that rarely is off of AC power? (but still has battery as well)

    Read the article

  • LaserJet M1522nF firmware was corrupted during the update

    - by AAA-Super
    I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I turned it on again and there is a message on the small screen saing HEWLETT-PACKARD After nothing appeared on screen the device seems to be blocked or the firmware was corrupted. Now, how can I reset the update of firmware or how can I reinstall it?

    Read the article

  • Grub problem with dual boot Ubuntu & XP (Ubuntu installed first)

    - by c00lryguy
    I had Ubuntu installed and I installed XP. I tried to be able to dual boot them by running an Ubuntu live cd and running ~ $ sudo grub grub> root (hd0,0) grub> setup (hd0) But now when I restart I get a black screen that says 'Boot device Selected Boot Device and press any key No matter what key I press it shows this error This is what my system looks like: /dev/sda1 - Ubuntu - ext3 - 73 GiB /dev/sda2 - Ubuntu - extended - 3.16 GiB /dev/sda5 - Ubuntu - linux-swap - 3.16 GiB /dev/sdb1 - Windows XP - ntfs - 76 GiB /dev/sdc1 - Stuff - ext3 - Code/Documents /dev/sdd2 - Stuff - ext3 - Movies/Music

    Read the article

  • What Linux distro should I install on an old PowerPC Mac?

    - by rockit
    I'm trying to set up my brother–who has a PPC Mac with 1 GHz processor and 256 MB RAM–with a Linux distro that would allow him to surf the web on the device. If anyone knows of this Mac, they also know that support has faded for the latest browsers, rendering the device essentially useless when it comes to the web. Ideally I would have installed Jolicloud, but alas, it is only Intel Mac compatible... Please let me know if you have any suggestions for me!

    Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >