Search Results

Search found 16971 results on 679 pages for 'blogs'.

Page 116/679 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Dual Boot Oracle Solaris 11/11 and Linux (Ubuntu 11.10/grub2)

  - by HartmutStreppel

  After having worked with Open Solaris on my laptop first, then with an upgrade to Oracle Solaris 11 Express, I finally did a fresh install of Oracle Solaris 11/11, when it became available. I am not a big fan of upgrades as I know that I am not the perfect administrator and my system gets spoiled with unclean configurations, outdated packages and wrong settings that cannot be reversed. So I prefer to start from scratch. Especially with Oracle Solaris 11 I wanted to have a system just like a customer would have it in production. The installation was smooth - more or less, if I had only read the documentation a bit better in advance. For a number of reasons I prefer a dual boot system. The most important one is, that especially with mobile devices you often run into network problems. And you have a hard time figuring out where the problem is: in your laptop hardware, in the OS you are running, or really within the network. If you have an alternate OS to boot, you can exclude the OS and your hardware. This makes you feel better. The second OS should be a Linux variant - and for some not so obvious reason I decided to go with the latest Ubuntu release (11.10). It replaced a very old Open Suse installation that had not been booted for a while. I knew that it was probably best to install Ubuntu first and then Oracle Solaris 11, as this would put the right boot information for Oracle Solaris  into the MBR and onto the root partition. But then, how to enable dual boot with the 2 OSes. Searching the web one mainly finds information about dual boot of: Linux and Linux Linux and Windows I do not want to explain which wrong configurations I worked through, but I prefer to explain the final setup, which is extremely simple, and I am wondering why this is not covered as the easiest solution for most dual boot setups. I use chainloader from and to both OS'es, with the only disadvantage that I have to confirm two grub menus each time I want to boot the "other" OS. Still there were some hurdles to jump over: Ubuntu did not like getting its boot blocks being placed on the partition instead of the disk; I must admit that I do not fully understand why. But using the --force option you could get that done Ubuntu needs an active partition; that was easy to achieve grub2 uses a different numbering scheme for the partitions. That is in the docs, if you read them. BTW: The usual disclaimer is valid. There is  no guarantee that what I describe works or works well. Please back up your data carefully before trying any of this. So, Oracle Solaris 11 is installed on the first partition and Ubuntu on the third. With Ubtuntu things initially were a bit more complicated, as I did not know how to boot it. And the live CD did not offer the capability to boot the on-disk image (at least I did not find it). So I booted the live CD, mounted the Ubuntu installation at /mnt and wrote the boot blocks into the partition. This is something that does not seem to be recommended, at least grub-install refrained from doing what I intended. After a bit more research I was bold enough to use the --force option and wrote the boot blocks to /dev/sda3 using grub-install --boot-directory=/mnt/boot --force --no-floppy /dev/sda3 So, I now had a system with the Solaris boot loader in the MBR, Solaris specific boot blocks on the Solaris root partition and Ubuntu specific boot blocks in the Ubuntu partition. I just had to chain them together and I was done. Oracle Solaris 11: I have added the following lines to /rpool/boot/grub/menu.lst (be aware of the /rpool!!!!) title Ubuntu 11.10root (hd0,2)makeactivechainloader +1boot The Ubuntu root file system sits on the third partition (/dev/sda3). Ubuntu: I have added the following lines to /etc/grub.d/40_custom: menuentry "Solaris 11/11" {      set root=(hd0,1)      chainloader +1} Two things need to be mentioned: a) grub2 starts numbering partitions with 1; so my /dev/sda1 is partition 1. b) Oracle Solaris boots without the partition being made active (btw: the command to make a partition active with grub2 is "parttool (hd0,1) boot+", which currently does not work for me). As debugging grub is a bit complicated, I used the grub CLI to perform some tests and also used a tool, that I found on sourceforge.net that was able to prepare a list of all boot loaders on all partitions. This told me that the basic setup was correct. Unfortunately I lost it in the live CD environment. I hope this is helpful for some of the readers.Hartmut

  Read the article

• Silverlight Cream for May 30, 2010 -- #873

  - by Dave Campbell

  In this Issue: Matthias Shapiro, Colin Blair(-2-), Mike Snow, Marlon Grech, Victor Gaudioso. Shoutout: If you're going to be anywhere near Mission Viejo, California on June 19th, set your calendar for this Victor Gaudioso event: New Speaking Event: Microsoft Book Signing/Silverlight 4 Presentation SilverLaw has another example of his Flexible surface app up: Drag & Drop Flexible Surface - Silverlight 4 From SilverlightCream.com: Silverlight 4 Binding and StringFormat in XAML Matthias Shapiro has a discussion posted about StringFormat binding in Silverlight 4 ... he dug in hard on this... well worth a read. View Model Collection Properties for WCF RIA Services Colin Blair is discussing some possibilities for exposing collections of entities from the ViewModel... his favorite: PagedCollectionView. The next post discusses this deeper. Advanced Paged Collection View Colin Blair continues in more depth on the PagedCollectionView, this time handling paging, sorting, and multiple loads. Silverlight Tip of the day #25 – Detecting Validation Errors on Submit Mike Snow's latest Tip of the Day is up and is about validation - specifically validating after your user has pressed "OK" INotifyPropertyChanged… I am fed up of handling events just to know when a property changed Marlon Grech has an Rx-less solution to code notifications of properties changing... this is a WPF and Silverlight solution and all the code is downloadable. New Silverlight Video Tutorial: How to Add Multiple BitmapEffects to One Object Victor Gaudioso's latest outing is in response to a query from a reader and is a video tutorial showing how to add multiple bitmap effects to one object. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Ovum report: Oracle Database 12c offers new take on multitenancy

  - by Javier Puerta

  Ovum has published a positive research note on Oracle Database 12c. Ovum concludes that Oracle Multitenant will provide significant productivity and resource savings for Oracle customers considering database consolidation, on- or off-premise. The multitenant features of Oracle Database 12c support not only cloud deployment, but also database consolidation. Oracle has purchased electronic distribution rights to this research note and posted it to Oracle.com. The full research note can be downloaded here.  

  Read the article

• User Experience Highlights in Siebel: Direct from George Jacob

  - by mvaughan

  By Misha Vaughan and Kathy Miedema, Oracle Applications User Experience This is the first in a series of blog posts on the user experience (UX) highlights coming in various Oracle product families. You’ll see themes around productivity and efficiency, as well as a thoughtful approach to pushing UX capabilities into the underlying tooling. Of course, you can also expect to get an early look at the latest mobile offerings coming through these product lines.Today’s post is on Siebel. To learn more about what’s ahead, attend Siebel OpenWorld presentations. Our first interview is with George Jacob, the Group Vice President for CRM Applications. George Jacob Q: How would you describe the vision you have for the user experience of Siebel? A: Contemporary: Siebel runs in all browsers and all browser-capable devices using the latest web technology standards, such as Javascript, CSS, and HTML 5.Productive: Siebel is designed for a user experience that reduces clutter and user keystrokes.User-sensitive: The user experience enables Siebel to adapt easily to site and user preferences.Q: How are the UX features you have delivered so far resonating with customers? A:  Customers are very excited about our refresh of the Siebel user interface framework; the Siebel roadmap and user interface sessions at Oracle OpenWorld last year overflowed. We have had to turn back customer requests to participate in the early adopter program because we had more than we could handle. Customers are calling this a game-changer for Siebel.Q: So the UX highlights are popular? A: Yes, the UX highlights are very popular, although to a certain extent we expected this!  Q: What’s coming in Siebel on a mobile platform? A: Our current mobile offering is based on Windows Mobile (native application), and is fairly mature (over 5 years). The new Siebel Open User Interface Framework, by virtue of working on all browsers, will run – when it is released this year – on tablets and smartphones. This is one of the reasons a number of customers are most excited about our UX changes. Views of Siebel data on mobile devices Q: What are you working on now that you think is going to be exciting to customers at OOW? A: We are working on the Siebel Open User Interface Framework, to be released this year in the Siebel 2012 8.1.1.9 & 8.2.2.2 innovation packs. We are also working on Connected Mobile applications for Sales, Service, Consumer Goods and Pharmaceuticals, and Disconnected Mobile applications for Pharmaceuticals in the same release. We are building specialized applications that exploit the new UI framework for Telco Order Capture and for Life Sciences healthcare professional visits. Our 2012 delivery will be the foundation for further user experience enhancements, next year and beyond.Q: What do you want Siebel customers to know? A:  We are excited to be focused on improving the user experience of Siebel applications, and it is encouraging to see the positive feedback from Siebel customers and partners.If you would like to see more in the Siebel user experience, be sure to check out these sessions at OpenWorld: CON9700 - Siebel CRM Overview, Strategy, and Roadmap CON9703 - User Interface Innovations with the New Siebel “Open UI” CON9705 - Unleash the Power of “Open UI” CON9697 - Mobile Solutions for Siebel CRM

  Read the article

• Project-Based ERP - The Evolution of Project Managemen

  Fred Studer speaks with Ray Wang, Principal Analyst at Forrester Research and Ted Kempf, Senior Director for Oracle's Project Management Solutions about trends in the project management market, where enterprise project management is heading in the next 2 - 3 years and highlights from Ray's new line of research on project management solutions.

  Read the article

• OAF Page to Upload Files into Server from local Machine

  - by PRajkumar

  1. Create a New Workspace and Project File > New > General > Workspace Configured for Oracle Applications File Name – PrajkumarFileUploadDemo   Automatically a new OA Project will also be created   Project Name -- FileUploadDemo Default Package -- prajkumar.oracle.apps.fnd.fileuploaddemo   2. Create a New Application Module (AM) Right Click on FileUploadDemo > New > ADF Business Components > Application Module Name -- FileUploadAM Package -- prajkumar.oracle.apps.fnd.fileuploaddemo.server Check Application Module Class: FileUploadAMImpl Generate JavaFile(s)   3. Create a New Page Right click on FileUploadDemo > New > Web Tier > OA Components > Page Name -- FileUploadPG Package -- prajkumar.oracle.apps.fnd.fileuploaddemo.webui   4. Select the FileUploadPG and go to the strcuture pane where a default region has been created   5. Select region1 and set the following properties --     Attribute Property ID PageLayoutRN AM Definition prajkumar.oracle.apps.fnd.fileuploaddemo.server.FileUploadAM Window Title Uploading File into Server from Local Machine Demo Window Title Uploading File into Server from Local Machine Demo     6. Create Stack Layout Region Under Page Layout Region Right click PageLayoutRN > New > Region   Attribute Property ID MainRN AM Definition messageComponentLayout   7. Create a New Item messageFileUpload Bean under MainRN Right click on MainRN > New > messageFileUpload Set Following Properties for New Item --   Attribute Property ID MessageFileUpload Item Style messageFileUpload   8. Create a New Item Submit Button Bean under MainRN Right click on MainRN > New > messageLayout Set Following Properties for messageLayout --   Attribute Property ID ButtonLayout   Right Click on ButtonLayout > New > Item   Attribute Property ID Submit Item Style submitButton Attribute Set /oracle/apps/fnd/attributesets/Buttons/Go   9. Create Controller for page FileUploadPG Right Click on PageLayoutRN > Set New Controller Package Name: prajkumar.oracle.apps.fnd.fileuploaddemo.webui Class Name: FileUploadCO   Write Following Code in FileUploadCO processFormRequest   import oracle.cabo.ui.data.DataObject; import java.io.FileOutputStream; import java.io.InputStream; import oracle.jbo.domain.BlobDomain; import java.io.File; import oracle.apps.fnd.framework.OAException; public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) { super.processFormRequest(pageContext, webBean);    if(pageContext.getParameter("Submit")!=null)  {   upLoadFile(pageContext,webBean);      } }   -- Use Following Code if want to Upload Files in Local Machine -- ----------------------------------------------------------------------------------- public void upLoadFile(OAPageContext pageContext,OAWebBean webBean) { String filePath = "D:\\PRajkumar";  System.out.println("Default File Path---->"+filePath);  String fileUrl = null;  try  {   DataObject fileUploadData =  pageContext.getNamedDataObject("MessageFileUpload"); //FileUploading is my MessageFileUpload Bean Id   if(fileUploadData!=null)   {    String uFileName = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_NAME");  // include this line    String contentType = (String) fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");  // For Mime Type    System.out.println("User File Name---->"+uFileName);    FileOutputStream output = null;    InputStream input = null;    BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, uFileName);    System.out.println("uploadedByteStream---->"+uploadedByteStream);                               File file = new File("D:\\PRajkumar", uFileName);    System.out.println("File output---->"+file);    output = new FileOutputStream(file);    System.out.println("output----->"+output);    input = uploadedByteStream.getInputStream();    System.out.println("input---->"+input);    byte abyte0[] = new byte[0x19000];    int i;         while((i = input.read(abyte0)) > 0)    output.write(abyte0, 0, i);    output.close();    input.close();   }  }  catch(Exception ex)  {   throw new OAException(ex.getMessage(), OAException.ERROR);  }     }   -- Use Following Code if want to Upload File into Server -- ------------------------------------------------------------------------- public void upLoadFile(OAPageContext pageContext,OAWebBean webBean) { String filePath = "/u01/app/apnac03r12/PRajkumar/";  System.out.println("Default File Path---->"+filePath);  String fileUrl = null;  try  {   DataObject fileUploadData =  pageContext.getNamedDataObject("MessageFileUpload");  //FileUploading is my MessageFileUpload Bean Id     if(fileUploadData!=null)   {    String uFileName = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_NAME");   // include this line    String contentType = (String) fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");   // For Mime Type    System.out.println("User File Name---->"+uFileName);    FileOutputStream output = null;    InputStream input = null;    BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, uFileName);    System.out.println("uploadedByteStream---->"+uploadedByteStream);                               File file = new File("/u01/app/apnac03r12/PRajkumar", uFileName);    System.out.println("File output---->"+file);    output = new FileOutputStream(file);    System.out.println("output----->"+output);    input = uploadedByteStream.getInputStream();    System.out.println("input---->"+input);    byte abyte0[] = new byte[0x19000];    int i;         while((i = input.read(abyte0)) > 0)    output.write(abyte0, 0, i);    output.close();    input.close();   }  }  catch(Exception ex)  {   throw new OAException(ex.getMessage(), OAException.ERROR);  }     }   10. Congratulation you have successfully finished. Run Your page and Test Your Work           -- Used Code to Upload files into Server   -- Before Upload files into Server     -- After Upload files into Server       -- Used Code to Upload files into Local Machine   -- Before Upload files into Local Machine       -- After Upload files into Local Machine

  Read the article

• Determining if you&rsquo;re running on the build server with MSBuild &ndash; Easy way

  - by ParadigmShift

  When you're customizing MSBuild in building a visual studio project, it often becomes important to determine if the build is running on the build server or your development environment. This information can change the way you set up path variables and other Conditional tasks.I've found many different answers online. It seems like they all only worked under certain conditions, so none of them were guaranteed to be consistent.So here's the simplest way I've found that has not failed me yet. <PropertyGroup> <!-- Determine if the current build is running on the build server --> <IsBuildServer>false</IsBuildServer> <IsBuildServer Condition="'$(BuildUri)' != ''">true</IsBuildServer> </PropertyGroup>   Shahzad Qureshi is a Software Engineer and Consultant in Salt Lake City, Utah, USAHis certifications include:Microsoft Certified System Engineer 3CX Certified Partner Global Information Assurance Certification – Secure Software Programmer – .NETHe is the owner of Utah VoIP Store at www.UtahVoIPStore.com and SWS Development at www.swsdev.com and publishes windows apps under the name Blue Voice.

  Read the article

• TDD and WCF behavior

  - by Frederic Hautecoeur

  Some weeks ago I wanted to develop a WCF behavior using TDD. I have lost some time trying to use mocks. After a while i decided to just use a host and a client. I don’t like this approach but so far I haven’t found a good and fast solution to use Unit Test for testing a WCF behavior. To Implement my solution I had to : Create a Dummy Service Definition; Create the Dummy Service Implementation; Create a host; Create a client in my test; Create and Add the behavior; Dummy Service Definition This is just a simple service, composed of an Interface and a simple implementation. The structure is aimed to be easily customizable for my future needs.   Using Clauses : 1: using System.Runtime.Serialization; 2: using System.ServiceModel; 3: using System.ServiceModel.Channels; The DataContract: 1: [DataContract()] 2: public class MyMessage 3: { 4: [DataMember()] 5: public string MessageString; 6: } The request MessageContract: 1: [MessageContract()] 2: public class RequestMessage 3: { 4: [MessageHeader(Name = "MyHeader", Namespace = "http://dummyservice/header", Relay = true)] 5: public string myHeader; 6:  7: [MessageBodyMember()] 8: public MyMessage myRequest; 9: } The response MessageContract: 1: [MessageContract()] 2: public class ResponseMessage 3: { 4: [MessageHeader(Name = "MyHeader", Namespace = "http://dummyservice/header", Relay = true)] 5: public string myHeader; 6:  7: [MessageBodyMember()] 8: public MyMessage myResponse; 9: } The ServiceContract: 1: [ServiceContract(Name="DummyService", Namespace="http://dummyservice",SessionMode=SessionMode.Allowed )] 2: interface IDummyService 3: { 4: [OperationContract(Action="Perform", IsOneWay=false, ProtectionLevel=System.Net.Security.ProtectionLevel.None )] 5: ResponseMessage DoThis(RequestMessage request); 6: } Dummy Service Implementation 1: public class DummyService:IDummyService 2: { 3: #region IDummyService Members 4: public ResponseMessage DoThis(RequestMessage request) 5: { 6: ResponseMessage response = new ResponseMessage(); 7: response.myHeader = "Response"; 8: response.myResponse = new MyMessage(); 9: response.myResponse.MessageString = 10: string.Format("Header:<{0}> and Request was <{1}>", 11: request.myHeader, request.myRequest.MessageString); 12: return response; 13: } 14: #endregion 15: } Host Creation The most simple host implementation using a Named Pipe binding. The GetBinding method will create a binding for the host and can be used to create the same binding for the client. 1: public static class TestHost 2: { 3: 4: internal static string hostUri = "net.pipe://localhost/dummy"; 5:  6: // Create Host method. 7: internal static ServiceHost CreateHost() 8: { 9: ServiceHost host = new ServiceHost(typeof(DummyService)); 10:  11: // Creating Endpoint 12: Uri namedPipeAddress = new Uri(hostUri); 13: host.AddServiceEndpoint(typeof(IDummyService), GetBinding(), namedPipeAddress); 14:  15: return host; 16: } 17:  18: // Binding Creation method. 19: internal static Binding GetBinding() 20: { 21: NamedPipeTransportBindingElement namedPipeTransport = new NamedPipeTransportBindingElement(); 22: TextMessageEncodingBindingElement textEncoding = new TextMessageEncodingBindingElement(); 23:  24: return new CustomBinding(textEncoding, namedPipeTransport); 25: } 26:  27: // Close Method. 28: internal static void Close(ServiceHost host) 29: { 30: if (null != host) 31: { 32: host.Close(); 33: host = null; 34: } 35: } 36: } Checking the service A simple test tool check the plumbing. 1: [TestMethod] 2: public void TestService() 3: { 4: using (ServiceHost host = TestHost.CreateHost()) 5: { 6: host.Open(); 7:  8: using (ChannelFactory<IDummyService> channel = 9: new ChannelFactory<IDummyService>(TestHost.GetBinding() 10: , new EndpointAddress(TestHost.hostUri))) 11: { 12: IDummyService svc = channel.CreateChannel(); 13: try 14: { 15: RequestMessage request = new RequestMessage(); 16: request.myHeader = Guid.NewGuid().ToString(); 17: request.myRequest = new MyMessage(); 18: request.myRequest.MessageString = "I want some beer."; 19:  20: ResponseMessage response = svc.DoThis(request); 21: } 22: catch (Exception ex) 23: { 24: Assert.Fail(ex.Message); 25: } 26: } 27: host.Close(); 28: } 29: } Running the service should show that the client and the host are running fine. So far so good. Adding the Behavior Add a reference to the Behavior project and add the using entry in the test class. We just need to add the behavior to the service host : 1: [TestMethod] 2: public void TestService() 3: { 4: using (ServiceHost host = TestHost.CreateHost()) 5: { 6: host.Description.Behaviors.Add(new MyBehavior()); 7: host.Open();¨ 8: …  If you set a breakpoint in your behavior and run the test in debug mode, you will hit the breakpoint. In this case I used a ServiceBehavior. To add an Endpoint behavior you have to add it to the endpoints. 1: host.Description.Endpoints[0].Behaviors.Add(new MyEndpointBehavior()) To add a contract or an operation behavior a custom attribute should work on the service contract definition. I haven’t tried that yet.   All the code provided in this blog and in the following files are for sample use. Improvements I don’t like to instantiate a client and a service to test my behaviors. But so far I have' not found an easy way to do it. Today I am passing a type of endpoint to the host creator and it creates the right binding type. This allows me to easily switch between bindings at will. I have used the same approach to test Mex Endpoints, another post should come later for this. Enjoy !

  Read the article

• Business Continuity for EBS Using Oracle 11g Physical Standby DB

  - by Steven Chan

  Our Applications Technology Group database architects have released two new documents covering the use of Oracle Data Guard to create physical standby databases for Oracle E-Business Suite environments:Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database (Note 1070033.1)Business Continuity for Oracle E-Business Release 11i Using Oracle 11g Physical Standby Database (Note 1068913.1)

  Read the article

• Uganda .NET Usergroup meeting (February 2010)

  - by Malisa L. Ncube

  We had a very interesting .NET meeting in which i gave a short presentation on the new features of .NET 4.0 and Visual Studio 2010. The main presentation came from Jake Markhus @jmarkhus who talked about NHibernate (http://nhforge.org).   The membership for the group is growing each time we meet and its very encouraging. Some employers found candidates within our group for hiring, and this has resulted in a mutual benefit between the employers and job-seekers – really cool stuff.   Jake above giving us the soup and nuts of NHibernate. We were very excited since a number companies decided to support us in many ways. Some members won the licenses for Telerik Suite (http://www.telerik.com) while Intellisense LTD (http://www.intellisense.co.ug) agreed to sponsor us on domain registration and hosting of the community site. Jake announced on the possibility of having DevExpress (http://www.devexpress.com) sponsor us on 2 licenses of CodeRush http://www.devexpress.com/coderush which would be won in the next meeting raffle. I (@malisancube) would like to thank all the companies and individuals who have decided to sponsor us as a community of developers. We appreciate your support very much. You can download the presentations here Jan 2010 “VS2010 and NET 4.0” by Malisa Ncube. Feb 2010 “Using NHibernate” by Jake Markhus   Technorati Tags: Uganda .NET Usergroup,.NET 4.0,Community,NHibernate

  Read the article

• Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers?

  - by Harish Gaur

  Did you miss this general session on Monday morning presented by Amit Zavery, VP of Oracle Fusion Middleware Product Management? There will be a recording made available shortly and in the meanwhile, here is a recap. Amit presented 5 strategies customers can leverage today to extend their applications. Figure 1: 5 Oracle Fusion Middleware strategies to extend Oracle Applications & Oracle Fusion Apps 1. Engage Everyone – Provide intuitive and social experience for application users using Oracle WebCenter 2. Extend Enterprise – Extend Oracle Applications to mobile devices using Oracle ADF Mobile 3. Orchestrate Processes – Automate key organization processes across on-premise & cloud applications using Oracle BPM Suite & Oracle SOA Suite 4. Secure the core – Provide single sign-on and self-service provisioning across multiple apps using Oracle Identity Management 5. Optimize Performance – Leverage Exalogic stack to consolidate multiple instance and improve performance of Oracle Applications Session included 3 demonstrations to illustrate these strategies. 1. First demo highlighted significance of mobile applications for unlocking existing investment in Applications such as EBS. Using a native iPhone application interacting with e-Business Suite, demo showed how expense approval can be mobile enabled with enhanced visibility using BI dashboards. 2. Second demo showed how you can extend a banking process in Siebel and Oracle Policy Automation with Oracle BPM Suite.Process starts in Siebel with a customer requesting a loan, and then jumps to OPA for loan recommendations and decision making and loan processing with approvals in handled in BPM Suite. Once approvals are completed Siebel is updated to complete the process. 3. Final demo showcased FMW components inside Fusion Applications, specifically WebCenter. Boeing, Underwriter Laboratories and Electronic Arts joined this quest and discussed 3 different approaches of leveraging Fusion Middleware stack to maximize their investment in Oracle Applications and/or Fusion Applications technology. Let’s briefly review what these customers shared during the session: 1. Extend Fusion Applications We know that Oracle Fusion Middleware is the underlying technology infrastructure for Oracle Fusion Applications. Architecturally, Oracle Fusion Apps leverages several components of Oracle Fusion Middleware from Oracle WebCenter for rich collaborative interface, Oracle SOA Suite & Oracle BPM Suite for orchestrating key underlying processes to Oracle BIEE for dash boarding and analytics. Boeing talked about how they are using Oracle BPM Suite 11g, a key component of Oracle Fusion Middleware with Oracle Fusion Apps to transform their supply chain. Tim Murnin, Director of Supply Chain talked about Boeing’s 5 year supply chain transformation journey. Boeing’s Integrated and Information Management division began with automation of critical RFQ process using Oracle BPM Suite. This 1st phase resulted in 38% reduction in labor costs for RFP. As a next step in this effort, Boeing is now creating a platform to enable electronic Order Management. Fusion Apps are playing a significant role in this phase. Boeing has gone live with Oracle Fusion Product Hub and efforts are underway with Oracle Fusion Distributed Order Orchestration (DOO). So, where does Oracle BPM Suite 11g fit in this equation? Let me explain. Business processes within Fusion Apps are designed using 2 standards: Business Process Execution Language (BPEL) and Business Process Modeling Notation (BPMN). These processes can be easily configured using declarative set of tools. Boeing leverages Oracle BPM Suite 11g (which supports BPMN 2.0) and Oracle SOA Suite (which supports BPEL) to “extend” these applications. Traditionally, customizations are done within an app using native technologies. But, instead of making process changes within Fusion Apps, Boeing has taken an approach of building “extensions” layer on top of the application. Fig 2: Boeing’s use of Oracle BPM Suite to orchestrate key supply chain processes across Fusion Apps 2. Maximize Oracle Applications investment Fusion Middleware appeals not only to Fusion Apps customers, but is also leveraged by Oracle E-Business Suite, PeopleSoft, Siebel and JD Edwards customers significantly. Using Oracle BPM Suite and Oracle SOA Suite is the recommended extension strategy for Oracle Fusion Apps and Oracle Applications Unlimited customers. Electronic Arts, E-Business Suite customer, spoke about their strategy to transform their order-to-cash process using Oracle SOA Suite, Oracle Foundation Packs and Oracle BAM. Udesh Naicker, Sr Director of IT at Elecronic Arts (EA), discussed how growth of social and digital gaming had started to put tremendous pressure on EA’s existing IT infrastructure. He discussed the challenge with millions of micro-transactions coming from several sources – Microsoft Xbox, Paypal, several service providers. EA found Order-2-Cash processes stretched to their limits. They lacked visibility into these transactions across the entire value chain. EA began by consolidating their E-Business Suite R11 instances into single E-Business Suite R12. EA needed to cater to a variety of service requirements, connectivity methods, file formats, and information latency. Their integration strategy was tactical, i.e., using file uploads, TIBCO, SQL scripts. After consolidating E-Business suite, EA standardized their integration approach with Oracle SOA Suite and Oracle AIA Foundation Pack. Oracle SOA Suite is the platform used to extend E-Business Suite R12 and standardize 60+ interfaces across several heterogeneous systems including PeopleSoft, Demantra, SF.com, Workday, and Managed EDI services spanning on-premise, hosted and cloud applications. EA believes that Oracle SOA Suite 11g based extension strategy has helped significantly in the followings ways: - It helped them keep customizations out of E-Business Suite, thereby keeping EBS R12 vanilla and upgrade safe - Developers are now proficient in technology which is also leveraged by Fusion Apps. This has helped them prepare for adoption of Fusion Apps in the future Fig 3: Using Oracle SOA Suite & Oracle e-Business Suite, Electronic Arts built new platform for order processing 3. Consolidate apps and improve scalability Exalogic is an optimal platform for customers to consolidate their application deployments and enhance performance. Underwriter Laboratories talked about their strategy to run their mission critical applications including e-Business Suite on Exalogic. Christian Anschuetz, CIO of Underwriter Laboratories (UL) shared how UL is on a growth path - $1B to $2.5B in 5 years- and planning a significant business transformation from a not-for-profit to a for-profit business. To support this growth, UL is planning to simplify its IT environment and the deployment complexity associated with ERP applications and technology it runs on. Their current applications were deployed on variety of hardware platforms and lacked comprehensive disaster recovery architecture. UL embarked on a mission to deploy E-Business Suite on Exalogic. UL’s solution is unique because it is one of the first to deploy a large number of Oracle applications and related Fusion Middleware technologies (SOA, BI, Analytical Applications AIA Foundation Pack and AIA EBS to Siebel UCM prebuilt integration) on the combined Exalogic and Exadata environment. UL is planning to move to a virtualized architecture toward the end of 2012 to securely host external facing applications like iStore Fig 4: Underwrites Labs deployed e-Business Suite on Exalogic to achieve performance gains Key takeaways are: - Fusion Middleware platform is certified with major Oracle Applications Unlimited offerings. Fusion Middleware is the underlying technological infrastructure for Fusion Apps - Customers choose Oracle Fusion Middleware to extend their applications (Apps Unlimited or Fusion Apps) to keep applications upgrade safe and prepare for Fusion Apps - Exalogic is an optimum platform to consolidate applications deployments and enhance performance

  Read the article

• Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers?

  - by Harish Gaur

  Did you miss this general session on Monday morning presented by Amit Zavery, VP of Oracle Fusion Middleware Product Management? There will be a recording made available shortly and in the meanwhile, here is a recap. Amit presented 5 strategies customers can leverage today to extend their applications. Figure 1: 5 Oracle Fusion Middleware strategies to extend Oracle Applications & Oracle Fusion Apps 1. Engage Everyone – Provide intuitive and social experience for application users using Oracle WebCenter 2. Extend Enterprise – Extend Oracle Applications to mobile devices using Oracle ADF Mobile 3. Orchestrate Processes – Automate key organization processes across on-premise & cloud applications using Oracle BPM Suite & Oracle SOA Suite 4. Secure the core – Provide single sign-on and self-service provisioning across multiple apps using Oracle Identity Management 5. Optimize Performance – Leverage Exalogic stack to consolidate multiple instance and improve performance of Oracle Applications Session included 3 demonstrations to illustrate these strategies. 1. First demo highlighted significance of mobile applications for unlocking existing investment in Applications such as EBS. Using a native iPhone application interacting with e-Business Suite, demo showed how expense approval can be mobile enabled with enhanced visibility using BI dashboards. 2. Second demo showed how you can extend a banking process in Siebel and Oracle Policy Automation with Oracle BPM Suite.Process starts in Siebel with a customer requesting a loan, and then jumps to OPA for loan recommendations and decision making and loan processing with approvals in handled in BPM Suite. Once approvals are completed Siebel is updated to complete the process. 3. Final demo showcased FMW components inside Fusion Applications, specifically WebCenter. Boeing, Underwriter Laboratories and Electronic Arts joined this quest and discussed 3 different approaches of leveraging Fusion Middleware stack to maximize their investment in Oracle Applications and/or Fusion Applications technology. Let’s briefly review what these customers shared during the session: 1. Extend Fusion Applications We know that Oracle Fusion Middleware is the underlying technology infrastructure for Oracle Fusion Applications. Architecturally, Oracle Fusion Apps leverages several components of Oracle Fusion Middleware from Oracle WebCenter for rich collaborative interface, Oracle SOA Suite & Oracle BPM Suite for orchestrating key underlying processes to Oracle BIEE for dash boarding and analytics. Boeing talked about how they are using Oracle BPM Suite 11g, a key component of Oracle Fusion Middleware with Oracle Fusion Apps to transform their supply chain. Tim Murnin, Director of Supply Chain talked about Boeing’s 5 year supply chain transformation journey. Boeing’s Integrated and Information Management division began with automation of critical RFQ process using Oracle BPM Suite. This 1st phase resulted in 38% reduction in labor costs for RFP. As a next step in this effort, Boeing is now creating a platform to enable electronic Order Management. Fusion Apps are playing a significant role in this phase. Boeing has gone live with Oracle Fusion Product Hub and efforts are underway with Oracle Fusion Distributed Order Orchestration (DOO). So, where does Oracle BPM Suite 11g fit in this equation? Let me explain. Business processes within Fusion Apps are designed using 2 standards: Business Process Execution Language (BPEL) and Business Process Modeling Notation (BPMN). These processes can be easily configured using declarative set of tools. Boeing leverages Oracle BPM Suite 11g (which supports BPMN 2.0) and Oracle SOA Suite (which supports BPEL) to “extend” these applications. Traditionally, customizations are done within an app using native technologies. But, instead of making process changes within Fusion Apps, Boeing has taken an approach of building “extensions” layer on top of the application. Fig 2: Boeing’s use of Oracle BPM Suite to orchestrate key supply chain processes across Fusion Apps 2. Maximize Oracle Applications investment Fusion Middleware appeals not only to Fusion Apps customers, but is also leveraged by Oracle E-Business Suite, PeopleSoft, Siebel and JD Edwards customers significantly. Using Oracle BPM Suite and Oracle SOA Suite is the recommended extension strategy for Oracle Fusion Apps and Oracle Applications Unlimited customers. Electronic Arts, E-Business Suite customer, spoke about their strategy to transform their order-to-cash process using Oracle SOA Suite, Oracle Foundation Packs and Oracle BAM. Udesh Naicker, Sr Director of IT at Elecronic Arts (EA), discussed how growth of social and digital gaming had started to put tremendous pressure on EA’s existing IT infrastructure. He discussed the challenge with millions of micro-transactions coming from several sources – Microsoft Xbox, Paypal, several service providers. EA found Order-2-Cash processes stretched to their limits. They lacked visibility into these transactions across the entire value chain. EA began by consolidating their E-Business Suite R11 instances into single E-Business Suite R12. EA needed to cater to a variety of service requirements, connectivity methods, file formats, and information latency. Their integration strategy was tactical, i.e., using file uploads, TIBCO, SQL scripts. After consolidating E-Business suite, EA standardized their integration approach with Oracle SOA Suite and Oracle AIA Foundation Pack. Oracle SOA Suite is the platform used to extend E-Business Suite R12 and standardize 60+ interfaces across several heterogeneous systems including PeopleSoft, Demantra, SF.com, Workday, and Managed EDI services spanning on-premise, hosted and cloud applications. EA believes that Oracle SOA Suite 11g based extension strategy has helped significantly in the followings ways: - It helped them keep customizations out of E-Business Suite, thereby keeping EBS R12 vanilla and upgrade safe - Developers are now proficient in technology which is also leveraged by Fusion Apps. This has helped them prepare for adoption of Fusion Apps in the future Fig 3: Using Oracle SOA Suite & Oracle e-Business Suite, Electronic Arts built new platform for order processing 3. Consolidate apps and improve scalability Exalogic is an optimal platform for customers to consolidate their application deployments and enhance performance. Underwriter Laboratories talked about their strategy to run their mission critical applications including e-Business Suite on Exalogic. Christian Anschuetz, CIO of Underwriter Laboratories (UL) shared how UL is on a growth path - $1B to $2.5B in 5 years- and planning a significant business transformation from a not-for-profit to a for-profit business. To support this growth, UL is planning to simplify its IT environment and the deployment complexity associated with ERP applications and technology it runs on. Their current applications were deployed on variety of hardware platforms and lacked comprehensive disaster recovery architecture. UL embarked on a mission to deploy E-Business Suite on Exalogic. UL’s solution is unique because it is one of the first to deploy a large number of Oracle applications and related Fusion Middleware technologies (SOA, BI, Analytical Applications AIA Foundation Pack and AIA EBS to Siebel UCM prebuilt integration) on the combined Exalogic and Exadata environment. UL is planning to move to a virtualized architecture toward the end of 2012 to securely host external facing applications like iStore Fig 4: Underwrites Labs deployed e-Business Suite on Exalogic to achieve performance gains Key takeaways are: - Fusion Middleware platform is certified with major Oracle Applications Unlimited offerings. Fusion Middleware is the underlying technological infrastructure for Fusion Apps - Customers choose Oracle Fusion Middleware to extend their applications (Apps Unlimited or Fusion Apps) to keep applications upgrade safe and prepare for Fusion Apps - Exalogic is an optimum platform to consolidate applications deployments and enhance performance TAGS: Fusion Apps, Exalogic, BPM Suite, SOA Suite, e-Business Suite Integration

  Read the article

• ODI 11g – Expert Accelerator for Model Creation

  - by David Allan

  Following on from my post earlier this morning on scripting model and topology creation tonight I thought I’d add a little UI to make those groovy functions a little more palatable. In OWB we have experts for capturing user input, with the groovy console we open up opportunities to build UI around the scripts in a very easy way – even I can do it;-) After a little googling around I found some useful posts on SwingBuilder, the most useful one that I used for the dialog below was this one here. This dialog captures user input for the technology and context for the model and logical schema etc to be created. You can see there are a variety of interesting controls, and its really easy to do. The dialog captures the users input, then when OK is pressed I call the functions from the earlier post to create the logical schema (plus all the other objects) and model. The image below shows what was created, you can see the model (with typo in name), the model is Oracle technology and references the logical schema ORACLE_SCOTT (that I named in dialog above), the logical schema is mapped via the GLOBAL context to the data server ORACLE_SCOTT_DEV (that I named in dialog above), and the physical schema used was just the user name that I connected with – so if you wanted a different user the schema name could be added to the dialog. In a nutshell, one dialog that encapsulates a simpler mechanism for creating a model. You can create your own scripts that use dialogs like this, capture input and process. You can find the groovy script for this is here odi_create_model.groovy, again I wrapped the user capture code in a groovy function and return the result in a variable and then simply call the createLogicalSchema and createModel functions from the previous posting. The script I supplied above has everything you will need. To execute use Tools->Groovy->Open Script and then execute the green play button on the toolbar. Have fun.

  Read the article

• The Social Business Thought Leaders - John Hagel

  - by kellsey.ruppel

  While many European economies are on the brink of a recession between increasing taxation and mounting loss of jobs and bankruptcy filing rates, there's an understandable risk of losing sight of the deeper forces at play. Yet instead of surrendering to uncertainty and trying to survive in the short term, many organizations are feeling the urge to be better prepared to thrive in these complex times by developing a more articulated long term understanding of both the opportunities / challenges ahead. For example: What long-term economic, technological and societal changes are rolling out? Which foundational dynamics will affect our companies' performance, productivity, competition, and innovative potential in the upcoming decades? How will digital infrastructure change our business landscape? What kind of capabilities will be key to compete in a market shaped by growing turbulence, unpredictability and volatility? Breaking out from a strictly cyclical thinking, studies such as the Shift Index by John Hagel, Co-Chairman of the Center for the Edge at Deloitte & Touche (See Measuring the forces of long-term change - The 2009 Shift Index), depict a worrying performance challenge that affected every industry in the entire US economy over the last 45 years. Amidst a more than doubled competitive intensity of the market, and even with an improved labor productivity, the actual performance of US firms has consistently fallen to 25% of what it was in 1965. Most of this reported value is shifting from institutions and organizations to individuals, whether they are customers or young creative talent. To thrive in the digital economy and reverse declining performance trends, companies will have to fundamentally rethink their management approach by moving from knowledge stocks to knowledge flows, from scalable efficiency to scalable learning, from push organizations to pull organizations. Based on the outcomes of the Shift Index and on the book The Power of Pull, the first episode of the Social Business Thought-Leaders features John Hagel to provide strategic insights on how companies will succeed in the 21st century.

  Read the article

• Soluciones Oracle para Servicios Sociales: Demo "El Ciudadano"

  - by alvaro.desantiago(at)oracle.com

  Las Soluciones Oracle mejoran la ejecución de los programas sociales de las Administraciones y el resultado obtenido por los ciudadanos. La Solución Oracle para Servicios Sociales permite a las Administraciones Públicas optimizar los resultados de las políticas sociales y maximizar la tasa de participación, através de la implantación de Siebel Case Management y Oracle Policy Automation.Les facilita, asimismo, compartir una visión única del ciudadano, gestionar los continuos cambios de políticas de mejora de los programas sociales y su prestación directa a los interesados.Oracle proporciona la solución de Servicios Sociales, para una variedad de áreas como son Beneficios Sociales, Empleo, Violencia de Género y Protección al Menor.

  Read the article

• Workshop in Holland - and open questions

  - by Mike Dietrich

  Thanks to everybody visiting yesterday the Upgrade Workshop in Maarsen. I had lots of fun - and I hope you'd enjoy it, too :-) The slides, as always, can be downloaded from: http://apex.oracle.com/folien Use the Schluesselwort/Keyword: upgrade112 And thanks to all those of you sending feedback regarding "traget/destination" (will change it in the slides) and other topics such as Enterprise Manager Grid Control 11g. Enterprise Manager 11g will be launched on 22-APR-2010 - and you can join the event live if you will be accidentialy in New York:http://www.oracle.com/enterprisemanager11g/index.html Thanks for this hint!!! Regarding the open questions: Will there be PSUs available for Intel Solaris? PSUs will be made available on nearly all platforms including Intel Solaris. Please see Note:882604.1 for platform information and Note:854428.1 for direct links to the PSU download location. Is COMMIT_WRITE=NOWAIT the default in patch set 10.2.0.4? I tried to verify this and neither couldn't find a bug entry nor a documentation saying the 10.2.0.4 has a different default setting (default behaviour is WAIT). Checked it in my 10.2.0.4 instances as well and there it is set to WAIT. If this parameter is not explicitly specified, then database commit behavior defaults to writing commit records to disk before control is returned to the client. If only IMMEDIATE or BATCH is specified, but not WAIT or NOWAIT, then WAIT mode is assumed. If only WAIT or NOWAIT is specified, but not IMMEDIATE or BATCH, then IMMEDIATE mode is assumed Please feedback to me if you have different experiences. Service Request escalation by telephone? Thanks for this update - I didn't realize that ;-) Now I know why it hasn't helped last month when I've updated an SR ... here's the official information on that: Note:199389.1 - Note has been updated on 24-FEB-2010. See the telephone number to Oracle support to request an escalation here: http://www.oracle.com/support/contact.html

  Read the article

• Sending Parameters with the BizTalk HTTP Adapter

  - by Christopher House

  I've never had occaison to use the BizTalk HTTP adapter since I've always needed SOAP rather than just POX (plain old XML).  Yesterday we decided that we're going to expose some data via a Java servlet that will accept an HTTP post and respond with POX.  I knew BizTalk had an HTTP adapter but I had no idea what it's capabilities were. After a quick read through the BizTalk docs, it was apparent that the HTTP send adapter does in fact do posts.  The concern I had though was how we were going to supply parameters to the servlet.  The examples I had seen using the HTTP adapter all involved posting an XML message to some HTTP location.  Our Java guy, however didn't want to take that approach.  He wanted us to provide a query string via post, much like you'd expect to see on an HTTP get.  I decided to put together a little test scenario and see what I could come up with.  We didn't have a test servlet I could go against and my Java experience is virtually nill, so I decided to put together an ASP.Net project to act as the servlet.  It didn't need to be fancy, just one HttpHandler that accepts a post, reads a parameter and returns XML.  With the HttpHandler done, I put together a simple orchestration to send a message to the handler.  I started by having the orch send a message of type System.String to see what it would look like when the handler received it. I set a breakpoint in my handler and kicked off the orchestration.  Below is what I saw: As I suspected, because of BizTalk's XML serialization, System.String was not going to work.  I thought back to my BizTalk 2004 days and I project I worked on that required sending HTML formatted emails via the SMTP adapter.  To acomplish that, I had used a .Net class with a custom serialization formatter that I got from a Microsoft sample.  The code for the class, RawString can be found here. I created a new class library with the RawString class as well as a static factory class, referenced that in my orchestration project and changed my message type from System.String to RawString.  Below is what the code in my message construction looks like: After deploying the updated orchestration, I fired it off again and checked the breakpoint in my HttpHandler.  This is what I saw: And there you have it.  The RawString message type allowed me to pass a query string in the HTTP post without wrapping it in XML.

  Read the article

• Special thanks to everyone that helped me in 2010.

  - by mbcrump

  2010 has been a very good year for me and I wanted to create a list and thank everyone for what they have done for me.  I also wanted to thank everyone for reading and subscribing to my blog. It is hard to believe that people actually want to read what I write. I feel like I owe a huge thanks to everyone listed below. Looking back upon 2010, I feel that I’ve grown as a developer and you are part of that reason. Sometimes we get caught up in day to day work and forget to give thanks to those that helped us along the way. The list below is mine, it includes people and companies. This list is obviously not going to include everyone that has helped, just those that have stood out in my mind. When I think back upon 2010, their names keep popping up in my head. So here goes, in no particular order.  People Dave Campbell – For everything he has done for the Silverlight Community with his Silverlight Cream blog. I can’t think of a better person to get recognition at the Silverlight FireStarter event. I also wanted to thank him for spending several hours of his time helping me track down a bug in my feedburner account. Victor Gaudioso – For his large collection of video tutorials on his blog and the passion and enthusiasm he has for Silverlight. We have talked on the phone and I’ve never met anyone so fired up for Silverlight. Kunal Chowdhury – Kunal has always been available for me to bounce ideas off of. Kunal has also answered a lot of questions that stumped me. His blog and CodeProject article have green a great help to me and the Silverlight Community. Glen Gordon – I was looking frantically for a Windows Phone 7 several months before release and Glen found one for me. This allowed me to start a blog series on the Windows Phone 7 hardware and developing an application from start to finish that Scott Guthrie retweeted.  Jeff Blankenburg – For listening to my complaints in the early stages of Windows Phone 7. Jeff was always very polite and gave me his cell phone number to talk it over. He also walked me through several problems that I was having early on. Pete Brown – For writing Silverlight 4 in Action. This book is definitely a labor of love. I followed Pete on Twitter as he was writing it and he spent a lot of late nights and weekends working on it. I felt a lot smarter after reading it the first time. The second time was even better. John Papa – For all of his work on the Silverlight Firestarter and the Silverlight community in general. He has also helped me on a personal level with several things. Daniel Heisler – For putting up with me the past year while we worked on many .NET projects together in 2010. Alvin Ashcraft – For publishing a daily blog post on the best of .NET links. He has linked to my site many times and I really appreciate what he does for the community. Chris Alcock – For publishing the Morning Brew every weekday. I remember when I first appeared on his site, I started getting hundreds of hits on my site and wondered if I was getting a DOS attack or something. It was great to find out that Chris had linked to one of my articles. Joel Cochran – For spending a week teaching “Blend-O-Rama”. This was my one of my favorite sessions of this year. I learned a lot about Expression Blend from it and the best part was that it was free and during lunchtime. Jeremy Likness – Jeremy is smart – very smart. I have learned a lot from Jeremy over the past year. He is also involved in the Silverlight community in every way possible, from forums to blog post to screencast to open source. It goes on and on. The people that I met at VSLive Orlando 2010. I had a great time chatting with Walt Ritscher, Wallace McClure, Tim Huckabee and David Platt. Also a special thanks to all of my friends on Twitter like @wilhil, @DBVaughan, @DataArtist, @wbm, @DirkStrauss and @rsringeri and many many more. Software Companies / Events / May of gave me FREE stuff. =) Microsoft (3) – I was sent a free coupon code by Microsoft to take the Silverlight 4 Beta Exam. I jumped on the offer and took the exam. It was great being selected to try out the exam before it goes public even though Microsoft eventually published a universal coupon code for everyone. I am still waiting to find out if I passed the exam. My fingers are crossed. Microsoft reaching out to me with some questions regarding the .NET Community. I’ve never had a company contact me with such interest in the community. Having a contest where 75 people could win a $100 gift certificate and a T-Shirt for submitting a Windows Phone 7 app. I submitted my app and won. All of the free launch events this year (Windows Phone 7, Visual Studio 2010, ASP.NET MVC). Wintellect – For providing an awesome day of free technical training called T.E.N. Where else can you get free training from some of the best programmers in the world? I also won a contest from them that included a NETAdvantage Ultimate License from Infragistics. VSLive – I attended the Orlando 2010 Conference and it was the best developer’s conference that I have ever attended. I got to know a lot of people at this conference and hang out with many wonderful speakers. I live tweeted the event and while it may have annoyed some, the organizers of VSLive loved it. I won the contest on Twitter and they invited me back to the 2011 session of my choice. This is a very nice gift and I really appreciate the generosity. BarcodeLib.com – For providing free barcode generating tools for a Non-Profit ASP.NET project that I was working on. Their third party controls really made this a breeze compared to my existing solution. NDepend – It is absolutely the best tool to improve code quality. The product is extremely large and I would recommend heading over to their site to check it out. Silverlight Spy – I was writing a blog post on Silverlight Spy and Koen Zwikstra provided a FREE license to me. If you ever wanted to peek inside of a Silverlight Application then this is the tool for you. He is also working on a version that will support OOB and Windows Phone 7. I would recommend checking out his site. Birmingham .NET Users Group / Silverlight Nights User Group – It takes a lot of time to put together a user group meeting every month yet it always seems to happen. I don’t want to name names for fear of leaving someone out but both of these User Groups are excellent if you live in the Birmingham, Alabama area. Publishing Companies Manning Publishing – For giving me early access to Silverlight 4 in Action by Pete Brown. It was really nice to be able to read this awesome book while Pete was writing it. I was also one of the first people to publish a review of the book. Sams Publishing and DZone – For providing a copy of Silverlight 4 Unleashed by Laurent Bugnion for me to review for their site. The review is coming in January 2011. Special Shoutout to the following 3rd Party Silverlight Controls It has been a great pleasure to work with the following companies on 3rd Party Control Giveaways every month. It always amazes me how every 3rd Party Control company is so eager to help out the community. I’ve never been turned down by any of these companies! These giveaways have sparked a lot of interest in Silverlight and hopefully I can continue giving away a new set every month. If you are a 3rd Party Control company and are interested in participating in these giveaways then please email me at mbcrump29[at]gmail[d0t].com. The companies below have already participated in my giveaways: Infragistics (December 2010) - Win a set of Infragistics Silverlight Controls with Data Visualization!  Mindscape (November 2010) - Mindscape Silverlight Controls + Free Mega Pack Contest Telerik (October 2010) - Win Telerik RadControls for Silverlight! ($799 Value) Again, I just wanted to say Thanks to everyone for helping me grow as a developer.  Subscribe to my feed

  Read the article

• Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suit

  - by longchun.zhu

  ???????????,ORACLE AMP,ACP3.0 For Oracle EBS R12???,?????????? - EBS R12.1.2 - Grid Control 10.2.0.1 - 10.2.0.5 - AMP3.0 - ACP3.0 ??????????,??????????????,????????????????. ??????,??????????...

  Read the article

• Silverlight Cream for December 09, 2010 -- #1006

  - by Dave Campbell

  In this Issue: Adam Kinney, Jonathan van de Veen, René Schulte(-2-), Vikas, Chad Campbell, Chris Koenig, John Papa, and Martin Krüger. Above the Fold: Silverlight: "Silverlight TV #54: Introducing 11 Brand New Labs" John Papa WP7: "Gestures in Windows Phone 7" Chris Koenig Training: "New Windows Phone 7 tutorials for Designers on toolbox!" Adam Kinney Shoutouts: Jesse Liberty posted ways to get help when you get stuck: Top 10 Tips To Getting Help With Silverlight From SilverlightCream.com: New Windows Phone 7 tutorials for Designers on toolbox! Adam Kinney posted about some WP7 design goodness he's had the opportunity to take part in putting together that is now available for all of us on the Microsoft design Toolbox site.... detailed info about what's there. Adventures while building a Silverlight Enterprise application part #39 Jonathan van de Veen has his latest Silverlight coding adventure detailed on his blog... in the final throes of releasing, he came across some issues surrounding CRUD operations... Windows Phone Unplugged - How to Detect the Zune Software René Schulte has a post up about my two favorite devices: Zune and WP7 ... and how to detect if the Zune software is running when the device is connected to the PC. Issue with the WP7 PictureDecoder and Workaround René Schulte has a second post up today about strange behavior with the PictureDecoder DecodeJpeg method... he describes the problem and a workaround for it. Performance Wizard for Silverlight Vikas reports some Silverlight goodness in the VS2010 SP1 beta that's out ... a Performance Wizard... and he's ratted out it's use and sharing that info... Submitting an App to the Windows Phone Marketplace Chad Campbell details the user experience of getting an app through the marketplace to users... from the standpoint of someone that's been there. Gestures in Windows Phone 7 Chris Koenig is talking about Gestures in WP7, documenting how he used some XNA to get some side-to-side image scrolling going on... and gave us the source! Silverlight TV #54: Introducing 11 Brand New Labs John Papa has his latest Silverlight TV up and he's talking to two great guys: Dan Wahlin and Corey Schuman who have produced the labs you've seen referenced... awesome stuff guys... WP7: precisely position the text cursor when writing text Martin Krüger has a quick WP7 usage tip up for precisely positioning the text cursor in a textbox ... I could have used that today when "Nick's Frame Shop" came up as "Nix Frame Shop" in a search. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• O&rsquo;Reilly E-Book of the Day 15/Aug/2014 - Advanced Quantitative Finance with C++

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/08/15/orsquoreilly-e-book-of-the-day-15aug2014---advanced-quantitative-finance.aspxToday’s half-price book of the Day offer from O’Reilly at http://shop.oreilly.com/product/9781782167228.do?code=MSDEAL is Advanced Quantitative Finance with C++. “This book will introduce you to the key mathematical models used to price financial derivatives, as well as the implementation of main numerical models used to solve them. In particular, equity, currency, interest rates, and credit derivatives are discussed. In the first part of the book, the main mathematical models used in the world of financial derivatives are discussed. Next, the numerical methods used to solve the mathematical models are presented. Finally, both the mathematical models and the numerical methods are used to solve some concrete problems in equity, forex, interest rate, and credit derivatives.”

  Read the article

• Conditional Operator Example

  - by mbcrump

  If you haven’t taken the time to learn conditional operators, then now is the time. I’ve added a quick and dirty example for those on the forums.   Code Snippet using System; using System.Net.Mail; using System.Net; using System.Globalization; using System.Windows.Forms;   class Demo {     //Please use conditional statements in your code. See example below.       public static void Main()     {         int dollars = 10;           //Bad Coder Bad !!! Don't do this         if (dollars == 1)         {             Console.WriteLine("Please deposit {0} dollar.", dollars);         }         else         {             Console.WriteLine("Please deposit {0} dollars.", dollars);         }             //Good Coder Good !!! Do this         Console.WriteLine("Please deposit {0} dollar{1}.", dollars, dollars == 1 ? ' ' : 's');         //                                                          expression   ? true : false           Console.ReadLine();          } }

  Read the article

• Introducing the Oracle MDM Blog - Why All MDM Solutions Aren't Equal

  - by ken.pulverman

  Welcome to the Oracle MDM Blog.  Dave Butler, Tony Ouk, and myself - Ken Pulverman, will be bringing you news and information from the world of MDM at Oracle.  Dave is our resident expert with more than 30 years of experience in data and information management. Tony has deep expertise in our Exadata product line which provides a strong hardware synergy with MDM.  I come from Siebel Systems where I helped found the team that built our integration product line and then our Universal Customer Master with is part of our MDM offering at Oracle. I thought I'd hit the ground running with a topic we are going to want to continue to bend your ear about.  We had a recent meeting with Ford Goodman, our head of MDM commercial sales in the US and he was very fired up about and important topic.  He's irked that all MDM solutions get painted with the same brush even though they aren't the same at all. There are companies out there trying to represent frameworks and toolkits as out of the box solutions.  They give you the pleasure (read pain) of doing things like developing your own multi-application data model, building your own web services, or creating your own APIs.  Huh?  What gets sold as flexibility in reality is a barrier to ever going live.  At Siebel Systems we obsessed over the notion of a customer.  Our data model took over 10 years to perfect as defining a customer is a very complex task indeed.  There are divisions, subsidiaries, branches, acquisitions, sites etc., etc., etc..  You'll want to do your homework, but trust me - you aren't going to want to take the time or resource to build these canonical data structures yourself.  And what about APIs?  Again, it sounds flexible.  In reality it's a lot of work. Our DNA at Oracle is to reduce the cost of information technology so we pre-integrate our technology with all of our major applications and pre-build integrations and connectors for all the major systems you work with.  This is tedious work that requires detailed knowledge of the interfaces of all the applications involved.  It is also version specific as the interface features and technology are always changing.  We have a substantial organization to manage this complexity so you don't have to.  Suffice to say, we'd like to help our customers peel back the rhetoric of companies that fly the MDM flag without a real offering that you can quickly benefit from. Please watch this space for more information on this storyline as well as news and information around Oracle MDM.

  Read the article

• Brighton Rocks: UA Europe 2011

  - by ultan o'broin

  User Assistance Europe 2011 was held in Brighton, UK. Having seen Quadrophenia a dozen times, I just had to go along (OK, I wanted to talk about messages in enterprise applications). Sadly, it rained a lot, though that was still eminently more tolerable than being stuck home in Dublin during Bloomsday. So, here are my somewhat selective highlights and observations from the conference, massively skewed towards my own interests, as usual. Enjoyed Leah Guren's (Cow TC) great start ‘keynote’ on the Cultural Dimensions of Software Help Usage. Starting out by revisiting Hofstede's and Hall's work on culture (how many times I have done this for Multilingual magazine?) and then Neilsen’s findings on age as an indicator of performance, Leah showed how it is the expertise of the user that user assistance (UA) needs to be designed for (especially for high-end users), with some considerations made for age, while the gender and culture of users are not major factors. Help also needs to be contextual and concise, embedded close to the action. That users are saying things like “If I want help on Office, I go to Google ” isn't all that profound at this stage, but it is always worth reiterating how search can be optimized to return better results for users. Interestingly, regardless of user education level, the issue of information quality--hinging on the lynchpin of terminology reflecting that of the user--is critical. Major takeaway for me there. Matthew Ellison’s sessions on embedded help and demos were also impressive. Embedded help that is concise and contextual is definitely a powerful UX enabler, and I’m pleased to say that in Oracle Fusion Applications we have embraced the concept fully. Matthew also mentioned in his session about successful software demos that the principle of modality with demos is a must. Look no further than Oracle User Productivity Kit demos See It!, Try It!, Know It, and Do It! modes, for example. I also found some key takeaways in the presentation by Marie-Louise Flacke on notes and warnings. Here, legal considerations seemed to take precedence over providing any real information to users. I was delighted when Marie-Louise called out the Oracle JDeveloper documentation as an exemplar of how to use notes and instructions instead of trying to scare the bejaysus out of people and not providing them with any real information they’d find useful instead. My own session on designing messages for enterprise applications was well attended. Knowing your user profiles (remember user expertise is the king maker for UA so write for each audience involved), how users really work, the required application business and UI rules, what your application technology supports, and how messages integrate with the enterprise help desk and support policies and you will go much further than relying solely on the guideline of "writing messages in plain language". And, remember the value in warnings and confirmation messages too, and how you can use them smartly. I hope y’all got something from my presentation and from my answers to questions afterwards. Ellis Pratt stole the show with his presentation on applying game theory to software UA, using plenty of colorful, relevant examples (check out the Atlassian and DropBox approaches, for example), and striking just the right balance between theory and practice. Completely agree that the approach to take here is not to make UA itself a game, but to invoke UA as part of a bigger game dynamic (time-to-task completion, personal and communal goals, personal achievement and status, and so on). Sure there are gotchas and limitations to gamification, and we need to do more research. However, we'll hear a lot more about this subject in coming years, particularly in the enterprise space. I hope. I also heard good things about the different sessions about DITA usage (including one by Sonja Fuga that clearly opens the door for major innovation in the community content space using WordPress), the progressive disclosure of information (Cerys Willoughby), an overview of controlled language (or "information quality", as I like to position it) solutions and rationale by Dave Gash, and others. I also spent time chatting with Mike Hamilton of MadCap Software, who showed me a cool demo of their Flare product, and the Lingo translation solution. I liked the idea of their licensing model for workers-on-the-go; that’s smart UX-awareness in itself. Also chatted with Julian Murfitt of Mekon about uptake of DITA in the enterprise space. In all, it's worth attending UA Europe. I was surprised, however, not to see conference topics about mobile UA, community conversation and content, and search in its own right. These are unstoppable forces now, and the latter is pretty central to providing assistance now to all but the most irredentist of hard-copy fetishists or advanced technical or functional users working away on the back end of applications and systems. Only saw one iPad too (says the guy who carries three laptops). Tweeting during the conference was pretty much nonexistent during the event, so no community energy there. Perhaps all this can be addressed next year. I would love to see the next UA Europe event come to Dublin (despite Bloomsday, it's not a bad place place, really) now that hotels are so cheap and all. So, what is my overall impression of the state of user assistance in Europe? Clearly, there are still many people in the industry who feel there is something broken with the traditional forms of user assistance (particularly printed doc) and something needs to be done about it. I would suggest they move on and try and embrace change, instead. Many others see new possibilities, offered by UX and technology, as well as the reality of online user behavior in an increasingly connected world and that is encouraging. Such thought leaders need to be listened to. As Ellis Pratt says in his great book, Trends in Technical Communication - Rethinking Help: “To stay relevant means taking a new perspective on the role (of technical writer), and delivering “products” over and above the traditional manual and online Help file... there are a number of new trends in this field - some complementary, some conflicting. Whatever trends emerge as the norm, it’s likely the status quo will change.” It already has, IMO. I hear similar debates in the professional translation world about the onset of translation crowd sourcing (the Facebook model) and machine translation (trust me, that battle is over). Neither of these initiatives has put anyone out of a job and probably won't, though the nature of the work might change. If anything, such innovations have increased the overall need for professional translators as user expectations rise, new audiences emerge, and organizations need to collate and curate user-generated content, combining it with their own. Perhaps user assistance professionals can learn from other professions and grow accordingly.

  Read the article

• Podcast Show Notes: Toronto Architect Day Panel Discussion

  - by Bob Rhubart

  The latest Oracle Technology Network ArchBeat Podcast features a four-part series recorded live during the panel discussion at OTN Architect Day in Tornonto, April 21, 2011. More than 100 people attended the event, and the audience tossed a lot of great questions at a terrific panel. Listen for yourself... Listen to Part 1 Panel introduction and a discussion of the typical characteristics of Cloud early-adopters. Listen to Part 2 (June 22) The panelists respond to an audience question about what happens when data in the Cloud crosses international borders. Listen to Part 3 (June 29) The panel discusses public versus private cloud as the best strategy for small or start-up businesses. Listen to Part 4 (July 6) The panel responds to an audience question about how cloud computing changes performance testing paradigms. The Architect Day panel includes (listed alphabetically): Dr. James Baty: Vice President, Oracle Global Enterprise Architecture Program [LinkedIn] Dave Chappelle: Enterprise Architect, Oracle Global Enterprise Architecture Program [LinkedIn] Timothy Davis: Director, Enterprise Architecture, Oracle Enterprise Solutions Group [LinkedIn] Michael Glas: Director, Enterprise Architecture, Oracle [LinkedIn] Bob Hensle: Director, Oracle [LinkedIn] Floyd Marinescu: Co-founder & Chief Editor of InfoQ.com and the QCon conferences [LinkedIn | Twitter | Homepage] Cary Millsap: Oracle ACE Director; Founder, President, and CEO at Method R Corporation [LinkedIn | Blog | Twitter] Coming Soon IASA CEO Paul Preiss talks about architecture as a profession. Thomas Erl and Anne Thomas Manes discuss their new book SOA Governance: Governing Shared Services On-Premise & in the Cloud A discussion of women in architecture Stay tuned: RSS

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >