Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 116/176 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Wake network adapter from deep sleep mode

  - by BeatMe

  I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

  Read the article

• Windows 7 does not recognise second display output [closed]

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• Samsung printer (ML-1640) margin problem

  - by Rytis

  I just got a new laser printer, Samsung ML-1640, and it has once again confirmed my experience that Samsung printers suck badly. The printer prints fine, except that the top margin is set at random, usually very small, cutting text on the top of page off. I tried updating firmware, getting new drivers, but nothing helped. I tried changing paper types, and it seemed that with the paper set as "plain" it was OK, but I just tried printing again after letting the printer rest for the night, and wasted 6 pages until I managed to print 2 boarding passes... Is there anything else I could try to resolve the issue?

  Read the article

• __modver_version_show undefined error when building linux kernel 3.0.4 version

  - by Jie Liu

  I tried to build the linux kernel 3.0.4 on ubuntu 11.10 in virtualbox. Here are my steps: Download the source code tar xjvf linux-source-3.0.0.tar.bz2 cd linux-source-3.0.0 make menuconfig, changed nothing but used the default config and save to .config make Actually I think it should be 3.0.4 because from the Makefile I could see VERSION = 3 PATCHLEVEL = 0 SUBLEVEL = 4 EXTRAVERSION = Then at stage 2 which is to make modules, an error happened: ERROR: "__modver_version_show" [drivers/staging/rts5139/rts5139.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Perhaps because 3.0.4 is a new release so that I can not find any same problem asked nor any solution to it.

  Read the article

• Cursor moves when left or right clicking on trackpad

  - by n00b

  I'm on an acer aspire v5-572p. When I am using the touchpad, and I left or right click something, the cursor moves every time by a couple pixels because unfortunately the clicking area, is also a touch area. I've tried switching to the synaptics mouse drivers provided on the Acer driver website, but the same problem exist. I have researched this problem and there is a fix for this issue in Ubuntu, but I am running Windows 8.1 x64. The problem also existed when I was on 8.0 How do I stop the cursor from moving on a click?

  Read the article

• Limit Windows PC Network/Internet Throughput

  - by Jon Cram

  I have a Vista x64 machine on a fairly fast Internet connection and either buggy drivers for the onboard Ethernet or faulty onboard Ethernet hardware. If I sustain too high a throughput on the Ethernet connection the network connection within Windows fails and I have to restart the machine to restore connectivity. I don't believe I can fix this issue (I'm erring towards faulty hardware) but would like to mitigate the effects by limiting my network throughput. I'm in a position where I would like to download a 5GB file from the Internet (a game install via Steam) and am certain that as this will take a few hours I will not be able to complete the download before my network connection within Windows fails. From downloading content through a BitTorrent client I have found that by limiting the download throughput to around 150 kilobytes per second I can maintain a steady network connection. I can't directly limit the throughput of the download through the Steam client and would instead like to find out how I can limit the throughput of my Ethernet connection within Windows. Any suggestions on how I can achieve this?

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help thanks...

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help

  Read the article

• Recommend a wireless PCI card for Windows 7

  - by Dan

  I have a crummy RT2500-based 11g card which does work in Win7 with the Vista driver (3.2.0.0) but it dies about every two hours or so. Googling around has led me to conclude that Ralink drivers are basically borked, and that I need something else for a stable connection. Can anyone recommend a suitable wireless adapter? It needs to be: 802.11g - draft-N nice but not at all essential. PCI - I already have far more USB devices than can possibly be good for me. Very reliable. Money isn't an object within reason. All input gratefully received!

  Read the article

• for what reason live USB linux images are not 100% persistent?

  - by gcb

  I understand that during CD-R times non-persistence had a purpose, but what's the purpose now that pretty much everyone uses USB flash drivers? not to mention USB3 sticks are pretty much 4x faster than my HD raid. I'm writing this while taking a break going over the linux from scratch guide... And i'm still baffled that this is not the norm already with all live images. So, Is there any reason (besides historical) that i'm missing and that will bite me after I finish this ext3-rw image?

  Read the article

• Slower wireless speed in Ubuntu 12.04 (64-bit) on Asus USB-N13

  - by PhantonTurtle

  I have an Asus USB-N13 which I use for wireless internet on my desktop. The download speed I get on Windows 7 (dual-boot) is 15.22 Mbps. On Ubuntu 12.04 (64-bit) I can only get 1.09 Mbps. I asked a question about this on the Ubuntu forums as well, but I did not get an answer. Here is the output from lsmod | grep rt which gives me, parport_pc 32866 0 rtl8192cu 103297 0 rtl8192c_common 75767 1 rtl8192cu rtlwifi 111202 1 rtl8192cu mac80211 506816 3 rtl8192cu,rtl8192c_common,rtlwifi cfg80211 205544 2 rtlwifi,mac80211 parport 46562 3 parport_pc,ppdev,lp I installed the drivers from Realtek (my chipset is Realtek, not Ralink) but that did not work.

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Why does my audio keep reverting to stereo?

  - by GraemeF

  I have an ASUS P7P55D LE motherboard with onboard sound and I am running Windows 7 64-bit, and I am using the SPDIF output from my motherboard to my receiver. On my receiver I can see which audio channels are in use (i.e. stereo or 5.1) In the audio interface properties I can test DTS Audio and Dolby Digital outputs and both work fine, but when I try to play a game with 5.1 sound (I've tried Left 4 Dead and Dragon Age Origins) it reverts to stereo. I was getting this behaviour with the default Microsoft drivers so I installed the latest from the ASUS website but there is no difference. I notice that in the Advanced tab the Default Format only allows me to choose from various 2 channel formats so maybe that is something to do with it? How can I get 5.1 output all of the time?

  Read the article

• Install 64-bit Windows 7 on Mac Using Bootcamp

  - by Paul Lefebvre

  Has anyone been able to install Windows 7 x64 under Bootcamp on a Mac? I was able to get the 32-bit version to install, but I cannot get x64 to install. The Mac doesn't seem to even want to boot the DVD. And even if I get it installed are there drivers that will work with it? I'd prefer to have Windows 7 x64 because I'd like to use the entire 6GB RAM in my MacBook Pro. I'd appreciate any tips or advice.

  Read the article

• Fullscreen Video stutters on second monitor laptop

  - by nobrandheroes

  Fullscreen video on my new 1080p monitor is choppy when it comes from my laptop. The same video plays when not full screen. This goes for all video(Flash/MKV, etc), regardless of video resolution. I have an ATI Mobility Radeon HD 4200 Series card in my Thinkpad Edge, Turion X2 2GHz. The computer plays 1080p fine. Things I've tried: Updating Drivers Switching cables Turning Hardware Acceleration Changing video players process priority Rebooting Turning of laptop screen Turning off unused processes Nothing Works. What is the likelyhood that my laptop cannot power a 1920x1280 display?

  Read the article

• How to install virtio balloon driver in Windows Server 2008 Std x64

  - by javano

  I am trying to run the install command in the INF file that comes on the virtio drivers ISO, after having downloaded devcon.exe from Microsoft's website. I am getting the following error and I don't know how to progress; C:\Users\Administrator\Desktop\ADM64>devcon install BALLOON.inf PCI\VEN_1AF4&DEV_1002&SUBSYS_00051AF4&REV_00 devcon.exe failed. 'DEV_1002' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_00051AF4' is not recognized as an internal or external command, operable program or batch file. 'REV_00' is not recognized as an internal or external command, operable program or batch file. Thank you.

  Read the article

• Visual Studio hangs Windows

  - by Kronikarz

  I have: Windows XP Pro SP3 with latest updates, drivers, .NET, etc. Pentium 4 2.8GHz 2GB RAM 150GB HD ATI Radeon HD 3400 Recently (as early as a week ago) Visual C++ (both 2005 Pro and 2008 Express) started hanging up my computer. Whenever they are run, after 5-20 minutes of work the computer freezes. Everything becomes unresponsive, including the mouse cursor. No combination of keys does anything. What's strange, is that Winamp/Firefox continues to play whatever it was playing at the time (internet radio, mp3 playlist, etc). The only thing I can do is a hard reboot. I've run CCleaner and a full AVG antivirus scan, both of which found nothing suspicious. Does anyone know of a solution to this problem?

  Read the article

• Connecting CR 2008 and Oracle database: "TNS file could not be opened"

  - by anand

  I am trying to connect to an Oracle database using CR 2008 drivers for oracle (specifically OLE db driver). When I try to connect I provide the correct connection parameters however I keep getting "TNS file could not be opened" error. I am very confused about this message does this mean I am missing some component? From my understanding the driver should be able to connect. Currently on the computer running Crystal reports there is only has Crystal reports 2008 installed. Do i need to install the oracle instant client on the CR computer in order to make a proper connection? Any suggestions would be greatly appreciated!

  Read the article

• Basic video editor for AVCHD Lite files?

  - by davr

  I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

  Read the article

• Cannot Get Sound Over HDMI in Windows 7

  - by Aayush

  Windows 7 has been really good to me, I never needed to install any drivers & that included sound. Win7 took care of all that, but because of that I don't have any extra controls. Just the native Windows sound controls. I connected my LCD and PC using the HDMI, works great with video but the sound seems to stick with the PC speakers. My friend somehow solved this in Vista, but to port the sound to the LCD, he always had to restart the computer, which I found really weird and never made me interested to even know how he did that. There has to be way to do this easily. Please let me know if anyone else had the same problem & solved it somehow. Thanks!

  Read the article

• Windows Fax and Scan

  - by Scott

  I'm trying to setup Fax Server on Server 2008 R2. The role installs fine. However from Windows Fax and Scan - Tools - Fax Accounts... I am unable to setup an account. I get the following error. "There was a nerror in configuring the account. Please contact your administrator." I've tried a number of things including removing the Fax Server role and reinstalling. No change. Removing registry keys specified in other forums. No change. In my attempts today I at one point did have the fax printer installed but removed it while I was trying to get x64 and x32 drivers installed. Now I can't get it back. Any ideas?

  Read the article

• Print spooler consumes over 1GB of memory

  - by Stephen Jennings

  Suddenly, on a Windows Vista Business workstation I manage, the Windows print spooler service is consuming over 1GB of memory. I got the call this morning that the user could not print. I discovered all printers were missing from the Printers applet in Control Panel. I rebooted the machine, and at first the printers were still missing, but after a few minutes (and much banging my head against the wall) they suddenly appeared. I stopped worrying about it until later today it happened again to the same workstation. To my knowledge, nothing has changed on the computer. No new printers have been added, no new print drivers would have been installed, and no new software is being used. I tried clearing out the spooler folder (C:\Windows\System32\spooler\printers) which did have four print jobs from this morning, but the problem persists after restarting the spooler service. When starting the service, it starts out using 824 KB of memory, then after about 20 seconds it starts creeping up about 10MB each second until it stabilizes around 1.8GB.

  Read the article

• Why does this monitor go to sleep but won't wake up, event though all related power options are turned off?

  - by VoidKing

  We have a machine, Windows 7 (64-bit) with ASUS motherboard, in our building that only sometimes seems to go to sleep, but won't wake up. The machine is still running but shaking the mouse or hitting keys on the keyboard won't wake it up. I have tried for days to isolate the problem, but every time we get to a "let's try this" scenario, it happens again, later. All power options related to display being off are set to never, except the simple, "turn display off after..." setting. That is, the hard drive is set to never turn off, and the computer is set to never sleep nor hibernate. All drivers seem to be up to date, but I am afraid I will hose the machine if I do a BIOS update (plus I figured that will probably have nothing to do with the issue and only make something else break). Wasn't sure if there was something obvious I was missing?

  Read the article

• Dedicated GPU in Dell PowerEdge C1100

  - by Eli Gundry

  We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >