host on demand - Page 117

C socket programming: connect() hangs

- by Fantastic Fourier

Hey all, I'm about to rip my hair out. I have this client that tries to connect to a server, everything seems to be fine, using gethostbyname(), socket(), bind(), but when trying toconnect()` it just hangs there and the server doesn't see anything from the client. I know that the server works because another client (also in C) can connect just fine. What causes the server to not see this incoming connection? I'm at the end of my wits here. The two different clients are pretty similar too so I'm even more lost. if (argc == 2) { host = argv[1]; // server address } else { printf("plz read the manual\n"); exit(1); } hserver = gethostbyname(host); if (hserver) { printf("host found: %p\n", hserver); printf("host found: %s\n", hserver->h_name ); } else { printf("host not found\n"); exit(1); } bzero((char * ) &server_address, sizeof(server_address)); // copy zeroes into string server_address.sin_family = AF_INET; server_address.sin_addr.s_addr = htonl(hserver->h_addr); server_address.sin_port = htons(SERVER_PORT); bzero((char * ) &client_address, sizeof(client_address)); // copy zeroes into string client_address.sin_family = AF_INET; client_address.sin_addr.s_addr = htonl(INADDR_ANY); client_address.sin_port = htons(SERVER_PORT); sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) exit(1); else { printf("socket is opened: %i \n", sockfd); info.sock_fd = sockfd; rv = fcntl(sockfd, F_SETFL, O_NONBLOCK); // socket set to NONBLOCK if(rv < 0) printf("nonblock failed: %i %s\n", errno, strerror(errno)); else printf("socket is set nonblock\n"); } timeout.tv_sec = 0; // seconds timeout.tv_usec = 500000; // micro seconds ( 0.5 seconds) setsockopt(sockfd, SOL_SOCKET, SO_RCVTIMEO, &timeout, sizeof(struct timeval)); rv = bind(sockfd, (struct sockaddr *) &client_address, sizeof(client_address)); if (rv < 0) { printf("MAIN: ERROR bind() %i: %s\n", errno, strerror(errno)); exit(1); } else printf("socket is bound\n"); rv = connect(sockfd, (struct sockaddr *) &server_address, sizeof(server_address)); printf("rv = %i\n", rv); if (rv < 0) { printf("MAIN: ERROR connect() %i: %s\n", errno, strerror(errno)); exit(1); } else printf("connected\n"); Any thoughts or insights are deeply greatly humongously appreciated. -Fourier

Read the article

Send Mail through Jsp page.

- by sourabhtaletiya

hi friends ,i have tried alot to send mail via jsp page but i am not succeded. A error is coming javax.servlet.ServletException: 530 5.7.0 Must issue a STARTTLS command first. x1sm5029316wbx.19 <html> <head> <title>JSP JavaMail Example </title> </head> <body> <%@ page import="java.util.*" %> <%@ page import="javax.mail.*" %> <%@ page import="javax.mail.internet.*" %> <%@ page import="javax.activation.*" %> <% java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider()); Properties props = System.getProperties(); props.put("mail.smtp.starttls.enable","true"); props.put("mail.smtp.starttls.required","true"); String host = "smtp.gmail.com"; String to = request.getParameter("to"); String from = request.getParameter("from"); String subject = request.getParameter("subject"); String messageText = request.getParameter("body"); boolean sessionDebug = false; props.put("mail.smtp.host", "smtp.gmail.com"); props.put("mail.transport.protocol", "smtp"); props.put("mail.smtp.port", "25"); props.put("mail.smtp.auth", "true"); props.put("mail.debug", "true"); props.put("mail.smtp.socketFactory.port","25"); props.put("mail.smtp.starttls.enable","true"); Session mailSession = Session.getDefaultInstance(props, null); mailSession.setDebug(sessionDebug); Message msg = new MimeMessage(mailSession); props.put("mail.smtp.starttls.enable","true"); msg.setFrom(new InternetAddress(from)); InternetAddress[] address = {new InternetAddress(to)}; msg.setRecipients(Message.RecipientType.TO, address); msg.setSubject(subject); msg.setSentDate(new Date()); msg.setText(messageText); props.put("mail.smtp.starttls.enable","true"); Transport tr = mailSession.getTransport("smtp"); tr.connect(host, "sourabh.web7", "june251989"); msg.saveChanges(); // don't forget this props.put("mail.smtp.starttls.enable","true"); tr.sendMessage(msg, msg.getAllRecipients()); tr.close(); // Transport.send(msg); /* out.println("Mail was sent to " + to); out.println(" from " + from); out.println(" using host " + host + ".");*/ %> </table> </body> </html>

Read the article

PC hangs and reboots from time to time

- by Bevor

Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

Read the article

501 Error during Libjingle PCP on Amazone EC2 running Openfire

- by AeroBuffalo

I am trying to implement Google's Libjingle (version: 0.6.14) PCP example and I am getting a 501: feature not implemented error during execution. Specifically, the error occurs after each "account" has connected, been authenticated and began communicating with the other. An abbreviated log of the interaction is provided at the end. I have set up my own jabber server (using OpenFire on an Amazon EC2 server), have opened all of the necessary ports and have added each "account" to the other's roster. The server has been set to allow for file transfers. My being new to working with servers, I am not sure why this error is occur and how to go about fixing it. Thanks in advance, AeroBuffalo P.S. Let me know if there is any additional information needed (i.e. the full program log for either/both ends). Receiving End: [018:217] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [018:217] <iq to="[email protected]/pcp" type="set" id="5"> [018:217] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="402024303" initiator="[email protected]/pcp"> [018:217] <content name="securetunnel" creator="initiator"> [018:217] <description xmlns="http://www.google.com/talk/securetunnel"> [018:217] <type>send:winein.jpeg</type> [018:217] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:217] </description> [018:217] <transport xmlns="http://www.google.com/transport/p2p"/> [018:217] </content> [018:217] </jingle> [018:217] <session xmlns="http://www.google.com/session" type="initiate" id="402024303" initiator="[email protected]/pcp"> [018:217] <description xmlns="http://www.google.com/talk/securetunnel"> [018:217] <type>send:winein.jpeg</type> [018:217] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:217] </description></session> [018:217] </iq> [018:217] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:217] <presence to="[email protected]/pcp" from="forgesend" type="error"> [018:217] <error code="404" type="cancel"> [018:217] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [018:217] </error></presence> [018:218] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:218] <presence to="[email protected]/pcp" from="forgesend" type="error"> [018:218] <error code="404" type="cancel"> [018:218] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [018:218] </error></presence> [018:264] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:264] <iq type="result" id="3" to="[email protected]/pcp"> [018:264] <query xmlns="google:jingleinfo"> [018:264] <stun> [018:264] <server host="stun.xten.net" udp="3478"/> [018:264] <server host="jivesoftware.com" udp="3478"/> [018:264] <server host="igniterealtime.org" udp="3478"/> [018:264] <server host="stun.fwdnet.net" udp="3478"/> [018:264] </stun> [018:264] <publicip ip="65.101.207.121"/> [018:264] </query></iq> [018:420] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:420] <iq to="[email protected]/pcp" type="set" id="5" from="[email protected]/pcp"> [018:420] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="3548650675" initiator="[email protected]/pcp"> [018:420] <content name="securetunnel" creator="initiator"> [018:420] <description xmlns="http://www.google.com/talk/securetunnel"> [018:420] <type>recv:wineout.jpeg</type> [018:420] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:420] </description> [018:420] <transport xmlns="http://www.google.com/transport/p2p"/> [018:420] </content></jingle> [018:420] <session xmlns="http://www.google.com/session" type="initiate" id="3548650675" initiator="[email protected]/pcp"> [018:420] <description xmlns="http://www.google.com/talk/securetunnel"> [018:420] <type>recv:wineout.jpeg</type> [018:420] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:420] </description></session></iq> [018:421] TunnelSessionClientBase::OnSessionCreate: received=1 [018:421] Session:3548650675 Old state:STATE_INIT New state:STATE_RECEIVEDINITIATE Type:http://www.google.com/talk/securetunnel Transport:http://www.google.com/transport/p2p [018:421] TunnelSession::OnSessionState(Session::STATE_RECEIVEDINITIATE) [018:421] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [018:421] <iq to="[email protected]/pcp" id="5" type="result"/> [018:465] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:465] <iq to="[email protected]/pcp" id="5" type="result" from="[email protected]/pcp"/> [198:665] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:20:15 2012 [198:665] <iq type="get" id="162-10" from="forgejabber.com" to="[email protected]/pcp"> [198:665] <ping xmlns="urn:xmpp:ping"/> [198:665] /iq> [198:665] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:20:15 2012 [198:665] <iq type="error" id="162-10" to="forgejabber.com"> [198:665] <ping xmlns="urn:xmpp:ping"/> [198:665] <error code="501" type="cancel"> [198:665] <feature-not-implemented xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [198:665] </error> [198:665] </iq> Sender: [019:043] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:043] <iq type="get" id="3"> [019:043] <query xmlns="google:jingleinfo"/> [019:043] </iq> [019:043] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:043] <iq to="[email protected]/pcp" type="set" id="5"> [019:043] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="3548650675" initiator="[email protected]/pcp"> [019:043] <content name="securetunnel" creator="initiator"> [019:043] <description xmlns="http://www.google.com/talk/securetunnel"> [019:043] <type>recv:wineout.jpeg</type> [019:043] <client-cert>--BEGIN CERTIFICATE----END CERTIFICATE--</client-cert> [019:043] </description> [019:043] <transport xmlns="http://www.google.com/transport/p2p"/> [019:043] </content> [019:043] </jingle> [019:043] <session xmlns="http://www.google.com/session" type="initiate" id="3548650675" initiator="[email protected]/pcp"> [019:043] <description xmlns="http://www.google.com/talk/securetunnel"> [019:043] <type>recv:wineout.jpeg</type> [019:043] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:043] </description></session></iq> [019:043] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:043] <presence to="[email protected]/pcp" from="forgereceive" type="error"> [019:043] <error code="404" type="cancel"> [019:043] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [019:043] </error></presence> [019:044] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:044] <presence to="[email protected]/pcp" from="forgereceive" type="error"> [019:044] <error code="404" type="cancel"> [019:044] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [019:044] </error></presence> [019:044] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:044] <iq to="[email protected]/pcp" type="set" id="5" from="[email protected]/pcp"> [019:044] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="402024303" initiator="[email protected]/pcp"> [019:044] <content name="securetunnel" creator="initiator"> [019:044] <description xmlns="http://www.google.com/talk/securetunnel"> [019:044] <type>send:winein.jpeg</type> [019:044] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:044] </description> [019:044] <transport xmlns="http://www.google.com/transport/p2p"/> [019:044] </content></jingle> [019:044] <session xmlns="http://www.google.com/session" type="initiate" id="402024303" initiator="[email protected]/pcp"> [019:044] <description xmlns="http://www.google.com/talk/securetunnel"> [019:044] <type>send:winein.jpeg</type> [019:044] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:044] </description></session></iq> [019:044] TunnelSessionClientBase::OnSessionCreate: received=1 [019:044] Session:402024303 Old state:STATE_INIT New state:STATE_RECEIVEDINITIATE Type:http://www.google.com/talk/securetunnel Transport:http://www.google.com/transport/p2p [019:044] TunnelSession::OnSessionState(Session::STATE_RECEIVEDINITIATE) [019:044] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:044] <iq to="[email protected]/pcp" id="5" type="result"/> [019:088] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:088] <iq type="result" id="3" to="[email protected]/pcp"> [019:088] <query xmlns="google:jingleinfo"> [019:088] <stun> [019:088] <server host="stun.xten.net" udp="3478"/> [019:088] <server host="jivesoftware.com" udp="3478"/> [019:088] <server host="igniterealtime.org" udp="3478"/> [019:088] <server host="stun.fwdnet.net" udp="3478"/> [019:088] </stun> [019:088] <publicip ip="65.101.207.121"/> [019:088] </query> [019:088] </iq> [019:183] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:183] <iq to="[email protected]/pcp" id="5" type="result" from="[email protected]/pcp"/> [199:381] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:20:15 2012 [199:381] <iq type="get" id="474-11" from="forgejabber.com" to="[email protected]/pcp"> [199:381] <ping xmlns="urn:xmpp:ping"/> [199:381] </iq> [199:381] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:20:15 2012 [199:381] <iq type="error" id="474-11" to="forgejabber.com"> [199:381] <ping xmlns="urn:xmpp:ping"/> [199:381] <error code="501" type="cancel"> [199:381] <feature-not-implemented xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [199:382] </error></iq>

Read the article

OpenBSD configuration: Client unable to mount via NFS using Berkeley Automounter (amd)

- by Rilindo

What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

Read the article

OpenBSD configuration: Client unable to automount via NFS using amd

- by Rilindo

What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

Read the article

Can't get network bridging to work

- by Antonis Christofides

I'm trying to make network bridging to work on a Debian squeeze (I'm experimenting in order to make a QEMU/KVM virtual machine that will be visible to the outside network as if it were a distinct machine). The problem is that when I type brctl addif br0 eth0 then I lose connectivity to the network until I type brctl delif br0 eth0. More specifically, here's how my machine looks like before I do anything (essentially eth0 is listening on 147.102.160.153): root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591848sec preferred_lft 604648sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 4c:ed:de:8e:44:d7 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ee:7c:88:59:d0:e8 brd ff:ff:ff:ff:ff:ff Now let me add the bridge: root@laura:/home/anthony# brctl addbr br0 root@laura:/home/anthony# ip tuntap add dev tap0 mode tap root@laura:/home/anthony# ip link set tap0 up root@laura:/home/anthony# brctl addif br0 tap0 Until here everything continues to work normally. Finally, I try to add eth0 to the bridge: root@laura:/home/anthony# brctl addif br0 eth0 At this point, I no longer have a network connection. If I try to ping something, it tells "Destination Host Unreachable". The output of ip addr show seems normal: root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591908sec preferred_lft 604708sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever [snip wlan0, vboxnet0 and pan0, which are down and irrelevant] 8: br0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff 9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff inet6 fe80::1430:f2ff:fe67:ab75/64 scope link valid_lft forever preferred_lft forever Also: root@laura:/home/anthony# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 147.102.160.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 147.102.160.200 0.0.0.0 UG 0 0 0 eth0 I can't understand what I'm doing wrong. I want the machine to continue to listen on 147.102.160.153 on eth0, and in addition to that I want to have a tap0 interface, bridged to eth0, that will be available to the guest machine so that the latter listens on another ip address (say 147.102.160.205). (If there's another way to achieve what I want, I'm also interested.)

Read the article

Varnish cached 'MISS status' object?

- by Hesey

My site uses nginx, varnish, jboss. And some url will be cached by varnish, it depends a response header from jboss. The first time, jboss tells varnish doesn't cache this url. Then the second request, jboss tells varnish to cache, but varnish won't cache it. I used varnishstat and found that 1 object is cached in Varnish, is that the 'MISS status' object? I remove grace code and the problem still exists. When I PURGE this url, varnish works fine and cache the url then. But I can't PURGE so much urls every startup time, how can I fix this? The configuration: acl local { "localhost"; } backend default { .host = "localhost"; .port = "8080"; .probe = { .url = "/preload.htm"; .interval = 3s; .timeout = 1s; .window = 5; .threshold = 3; } } sub vcl_deliver { if (req.request == "PURGE") { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Content-Type; remove resp.http.Server; remove resp.http.Date; remove resp.http.Accept-Ranges; remove resp.http.Connection; set resp.http.keeplive="true"; } else { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } } sub vcl_recv { if(req.url ~ "/check.htm"){ error 404 "N"; } if( req.http.host ~ "store." || req.request == "POST"){ return (pipe); } if (req.backend.healthy) { set req.grace = 30s; } else { set req.grace = 10m; } set req.http.x-cacheKey = "0"; if(req.url ~ "/shop/view_shop.htm" || req.url ~ "/shop/viewShop.htm" || req.url ~ "/index.htm"){ if(req.url ~ "search=y"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; }else if(req.url !~ "bbs=y" && req.url !~ "shopIntro=y" && req.url !~ "shop_intro=y"){ set req.http.x-cacheKey = req.http.host + "/index.htm"; } }else if(req.url ~ "/search"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; } if( req.http.x-cacheKey == "0" && req.url !~ "/i/"){ return (pipe); } if (req.request == "PURGE") { if (client.ip ~ local) { return (lookup); } else { error 405 "Not allowed."; } } if (req.url ~ "/i/") { set req.http.x-shop-url = req.original_url; }else { unset req.http.cookie; } } sub vcl_fetch { set beresp.grace = 10m; #unset beresp.http.x-cacheKey; if (req.url ~ "/i/" || req.url ~ "status" ){ set beresp.ttl = 0s; /* ttl=0 for dynamic content */ } else if(beresp.http.x-varnish-cache != "1"){ set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 0s; unset beresp.http.set-cookie; } else { set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 1800s; unset beresp.http.set-cookie; } } sub vcl_hash { hash_data(req.http.x-cacheKey); return (hash); } sub vcl_error { if (req.request == "PURGE") { return (deliver); } else { set obj.http.Content-Type = "text/html; charset=gbk"; synthetic {""}; return (deliver); } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "N"; } }

Read the article

set proxy in apache for XMPP chat

- by Hunt

I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

Read the article

Linux not buffering block I/O when the device is not "in use" (i.e. mounted)

- by Radek Hladík

I am installing new server and I've found an interesting issue. The server is running Fedora 19 (3.11.7-200.fc19.x86_64 kernel) and is supposed to host a few KVM/Qemu virtual servers (mail server, file server, etc..). The HW is Intel(R) Xeon(R) CPU 5160 @ 3.00GHz with 16GB RAM. One of the most important features will be Samba server and we have decided to make it as virtual machine with almost direct access to the disks. So the real HDD is cached on SSD (via bcache) then raided with md and the final device is exported into the virtual machine via virtio. The virtual machine is again Fedora 19 with the same kernel. One important topic to find out is whether the virtualization layer will not introduce high overload into disk I/Os. So far I've been able to get up to 180MB/s in VM and up to 220MB/s on real HW (on the SSD disk). I am still not sure why the overhead is so big but it is more than the network can handle so I do not care so much. The interesting thing is that I've found that the disk reads are not buffered in the VM unless I create and mount FS on the disk or I use the disks somehow. Simply put: Lets do dd to read disk for the first time (the /dev/vdd is an old Raptor disk 70MB/s is its real speed): [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 36.8038 s, 71.2 MB/s Buffers: 14444 kB Rereading the data shows that they are cached somewhere but not in buffers of the VM. Also the speed increased to "only" 500MB/s. The VM has 4GB of RAM (more that the test file) [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.16016 s, 508 MB/s Buffers: 14444 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.05727 s, 518 MB/s Buffers: 14444 kB Now lets mount the FS on /dev/vdd and try the dd again: [root@localhost ~]# mount /dev/vdd /mnt/tmp [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 4.68578 s, 559 MB/s Buffers: 2574592 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 1.50504 s, 1.7 GB/s Buffers: 2574592 kB While the first read was the same, all 2.6GB got buffered and the next read was at 1.7GB/s. And when I unmount the device: [root@localhost ~]# umount /mnt/tmp [root@localhost ~]# cat /proc/meminfo | grep Buffers Buffers: 14452 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.10499 s, 514 MB/s Buffers: 14468 kB The bcache was disabled while testing and the results are same on faster (newer) HDDs and on SSD (except for the initial read speed of course). To sum it up. When I read from the device via dd first time, it gets read from the disk. Next time I reread it gets cached in the host but not in the guest (thats actually the same issue, more on that later). When I mount the filesystem but try to read the device directly it gets cached in VM (via buffers). As soon as I stop "using" it, buffers are discarded and the device is not cached anymore in the VM. When I looked into buffers value on the host I realized that the situation is the same. The block I/O gets buffered only when the disk is in use, in this case it means "exported to a VM". On host, after all the measurement done: 3165552 buffers On the host, after the VM shutdown: 119176 buffers I know it is not important as the disks will be mounted all the time but I am curious and I would like to know why it is working like this.

Read the article

KVM + Cloudmin + IpTables

- by Alex

I have a KVM virtualization on a machine. I use Ubuntu Server + Cloudmin (in order to manage virtual machine instances). On a host system I have four network interfaces: ebadmin@saturn:/var/log$ ifconfig br0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 inet addr:192.168.0.253 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::1278:d2ff:feec:1638/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:589337 errors:0 dropped:0 overruns:0 frame:0 TX packets:334357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:753652448 (753.6 MB) TX bytes:43385198 (43.3 MB) br1 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16995 errors:0 dropped:0 overruns:0 frame:0 TX packets:13309 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2059264 (2.0 MB) TX bytes:1763980 (1.7 MB) eth0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:610558 errors:0 dropped:0 overruns:0 frame:0 TX packets:332382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:769477564 (769.4 MB) TX bytes:44360402 (44.3 MB) Interrupt:20 Memory:fe400000-fe420000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:239632 errors:0 dropped:0 overruns:0 frame:0 TX packets:239632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50738052 (50.7 MB) TX bytes:50738052 (50.7 MB) tap0 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17821 errors:0 dropped:0 overruns:0 frame:0 TX packets:13703 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:2370468 (2.3 MB) TX bytes:1782356 (1.7 MB) br0 is connected to a real network, br1 is used to create a private network shared between guest systems. Now I need to configure iptables for network access. First of all I allow ssh sessions on port 8022 on the host system, then I allow all connections in state RELATED, ESTABLISHED. This is working ok. I install another system as guest, it's IP address is 192.168.10.2, and now I have two problems: I want to allow the access from this host to the outside world, cannot accomplish this. I can ssh from the host. I want to be able to ssh to the guest from the outside world using 8023 port. Cannot accomplish this. Full iptables configuration is following: ebadmin@saturn:/var/log$ sudo iptables --list [sudo] password for ebadmin: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:8022 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED LOG all -- anywhere anywhere LOG level warning Chain FORWARD (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning Chain OUTPUT (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning ebadmin@saturn:/var/log$ sudo iptables -t nat --list Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp spt:8023 to:192.168.10.2:22 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination The worst of all is that I don't know how to interpret iptables logs. I don't see the final decision of the firewall. Need help urgently.

Read the article

Trying to connect phpMyAdmin to remote mySQL server ( 2002: can't connect )

- by Malcolm Jones

Trying to get phpMyAdmin to talk to a remote mySQL server. The config is below and there is already a user set up in mySQL DB to be able to log in from the specified host that PMA sits on. Hosting is provided by Rackspace (Rightscale) and both cloud servers behind the same firewall. [config.inc.php] <?php $cfg['blowfish_secret'] = ''; $i = 0; $i++; $cfg['Servers'][$i]['host'] = 'XX.XX.XX.XX'; // MySQL hostname or IP address $cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port $cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket $cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket') $cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli') $cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection // (requires PHP >= 4.3.0) $cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings // (this user must have read-only $cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user" // and "mysql/db" tables). // The controluser is also // used for all relational // features (pmadb) $cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (config, http or cookie based)? $cfg['Servers'][$i]['user'] = 'USERNAME'; // MySQL user $cfg['Servers'][$i]['password'] = 'PASSWORD'; // MySQL password (only needed // with 'config' auth_type) $cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only // this db is displayed in left frame // It may also be an array of db-names, where sorting order is relevant. $cfg['Servers'][$i]['hide_db'] = ''; // Database name to be hidden from listings $cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname $cfg['Servers'][$i]['pmadb'] = ''; // Database used for Relation, Bookmark and PDF Features // (see scripts/create_tables.sql) // - leave blank for no support // DEFAULT: 'phpmyadmin' $cfg['Servers'][$i]['bookmarktable'] = ''; // Bookmark table // - leave blank for no bookmark support // DEFAULT: 'pma_bookmark' $cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc) // - leave blank for no relation-links support // DEFAULT: 'pma_relation' $cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields // - leave blank for no display fields support // DEFAULT: 'pma_table_info' $cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema // - leave blank for no PDF schema support // DEFAULT: 'pma_table_coords' $cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf // - leave blank if you don't want to use this // DEFAULT: 'pma_pdf_pages' $cfg['Servers'][$i]['column_info'] = ''; // table to store column information // - leave blank for no column comments/mime types // DEFAULT: 'pma_column_info' $cfg['Servers'][$i]['history'] = ''; // table to store SQL history // - leave blank for no SQL query history // DEFAULT: 'pma_history' $cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables // are up to date. This prevents compatibility // checks and thereby increases performance. $cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login $cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use = ''; $cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults = array(); Please let me know if you need anymore info. -- Malcolm

Read the article

What's wrong with this vcl config for varnish-cache as load balancer?

- by dabito

I have the current configurations active on my default.vcl varnish file on the machine that balances the load for other two machines (the other two machines also have varnish active). My intention is to have this server do only the load balancing and the other machines do the processing and also their own caching. My problem is that even with the config testing (not even a stress test or anything, just a few requests a minute) I get the guru meditation error and have to restart varnish. This is the default.vcl for the load balancing server: backend vader { .host = "app1.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } backend malgus { .host = "app2.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } director dooku round-robin { { .backend = vader; } { .backend = malgus; } } sub vcl_recv { if (req.http.host ~ "^balancer.server.com$") { set req.backend = dooku; } } Am I doing something wrong or missing something? EDIT: This is varnishlog's output: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839995 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839998 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840001 1.0 0 Backend_health - malgus Still sick 4--X--- 0 3 5 0.000000 3.846876 0 Backend_health - vader Still sick 4--X--- 0 3 5 0.000000 3.839194 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840004 1.0 14 SessionOpen c 10.150.7.151 38272 :80 14 ReqStart c 10.150.7.151 38272 458200540 14 RxRequest c GET 14 RxURL c / 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c / 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:44 GMT 14 TxHeader c X-Varnish: 458200540 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200540 1345840004.916415691 1345840004.965190172 0.020933390 0.048741817 0.000032663 14 SessionClose c error 14 StatSess c 10.150.7.151 38272 0 1 1 0 1 0 256 418 14 SessionOpen c 10.150.7.151 38273 :80 14 ReqStart c 10.150.7.151 38273 458200541 14 RxRequest c GET 14 RxURL c /favicon.ico 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c Accept: */* 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c /favicon.ico 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:45 GMT 14 TxHeader c X-Varnish: 458200541 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200541 1345840005.226389885 1345840005.226457834 0.000026941 0.000043154 0.000024796 14 SessionClose c error 14 StatSess c 10.150.7.151 38273 0 1 1 0 1 0 256 418

Read the article

Keeping up with Technology

- by kennedysteve

If you're like me, you have a hard time keeping up with all the technologies out there. The reality is there's too many new technologies (languages, methodologies, tools, etc). One of the ways I try to keep up with everything is by using good ol' RSS feeds in conjunction with Google Reader. Google Reader is both an online aggregator of RSS feeds, and it also has a good companion app on Google Android. The nicest part of Google Reader for me is the "All Listings" view which gives me a reverse chronological view of ALL articles (mixed together) regardless of the actual RSS feed. This way, I get to see the newest articles first. I can then choose to hide the articles I've viewed, etc. Here is a list of my RSS feeds. Admittedly, some of these are all over the spectrum. But you might find one or two interesting. .NET Rocks! RSS = http://feeds.feedburner.com/netRocksFullMp3Downloads Main Web Site = http://www.dotnetrocks.com Channel 9 RSS = http://channel9.msdn.com/Feeds/RSS Main Web Site = http://channel9.msdn.com/ CodePlex RSS = http://www.codeplex.com/site/feeds/rss Main Web Site = http://www.codeplex.com/site/feeds/rss Connected Show Developer Podcast! RSS = http://feeds.connectedshow.com/ConnectedShow Main Web Site = http://www.ConnectedShow.com/ dnrTV RSS = http://feeds.feedburner.com/DnrtvWmv?format=xml Main Web Site = http://dnrtv.com ebookshare RSS = http://www.ebookshare.net/feed/ Main Web Site = http://www.ebookshare.net Geekswithblogs.net RSS = http://feeds.feedburner.com/geekswithblogs Main Web Site = http://geekswithblogs.net/mainfeed.aspx Gmail Blog RSS = http://feeds.feedburner.com/OfficialGmailBlog?format=xml Main Web Site = http://gmailblog.blogspot.com/ Google Mobile Blog RSS = http://feeds.feedburner.com/OfficialGoogleMobileBlog Main Web Site = http://googlemobile.blogspot.com/ Herding Code RSS = http://feeds.feedburner.com/herdingcode Main Web Site = http://herdingcode.com LearnVisualStudio.NET Videos RSS = http://www.learnvisualstudio.net/videos.rss Main Web Site = http://www.learnvisualstudio.net/ Microsoft Learning Upcoming = Microsoft Learning Upcoming Titles RSS = http://learning.microsoft.com/rss/en-US/upcomingtitles?brand=Learning Main Web Site = http://learning.microsoft.com:80/rss/en-US/upcomingtitles?brand=Learning MS On-demand Webcasts RSS = http://www.microsoft.com/communities/rss.aspx?&Title=On-Demand+Webcasts&RssTitle=Microsoft+Webcasts%3A+On-Demand+Webcasts&CMTYSvcSource=MSCOMMedia&WebNewsURL=http%3A%2F%2Fwww.microsoft.com%2Fevents%2FEventDetails.aspx&CMTYRawShape=list&Params=+%0D%0A%09~CMTYDataSvcParams%5E%0D%0A%09~arg+Name%3D'EventType'+Value%3D'OnDemandWebcast'%2F%5E%0D%0A%09~arg+Name%3D'ProviderID'+Value%3D'A6B43178-497C-4225-BA42-DF595171F04C'%2F%5E%0D%0A%09~arg+Name%3D'StartDate'+Value%3D'06%2F30%2F2006'%2F%5E%0D%0A%09~arg+Name%3D'EndDate'+Value%3D'Now%2B0'%2F%5E%0D%0A%09~%2FCMTYDataSvcParams%5E+&NumberOfItems=100 Main Web Site = http://www.microsoft.com/events/default.mspx MS Podcasts for Devs RSS = http://www.microsoft.com/events/podcasts/default.aspx?podcast=rss&audience=Audience-e5381407-359f-4922-97d0-0237af790eee&pageId=x40 Main Web Site = http://www.microsoft.com/events/podcasts/default.aspx?audience=Audience-e5381407-359f-4922-97d0-0237af790eee&pageId=x40&WT.rss_ev=f MSDN Blogs RSS = http://blogs.msdn.com/b/mainfeed.aspx?Type=BlogsOnly Main Web Site = http://blogs.msdn.com/b/ MSDN Radio RSS = http://www.microsoft.com/events/podcasts/default.aspx?topic=&audience=&view=&pageId=x73&seriesID=Series-b9139976-8d48-4249-9b89-ccd17891de1e.xml&podcast=rss&type=wma Main Web Site = http://www.microsoft.com/events/podcasts/default.aspx?seriesID=Series-b9139976-8d48-4249-9b89-ccd17891de1e.xml&pageId=x73&WT.rss_ev=f O'Reilly Deal of the Day RSS = http://feeds.feedburner.com/oreilly/ebookdealoftheday Main Web Site = http://oreilly.com O'Reilly New RSS = http://feeds.feedburner.com/oreilly/newbooks Main Web Site = http://oreilly.com/ Safari Books Online RSS = http://my.safaribooksonline.com/rss Main Web Site = http://my.safaribooksonline.com/ ScottGu's Blog RSS = http://weblogs.asp.net/scottgu/rss.aspx Main Web Site = http://weblogs.asp.net/scottgu/default.aspx SourceForge Community Blog RSS = http://sourceforge.net/blog/feed/ Main Web Site = http://sourceforge.net/blog Stack Overflow RSS = http://blog.stackoverflow.com/feed/ Main Web Site = http://blog.stackoverflow.com Stepcase Lifehack RSS = http://www.lifehack.org/feed/ Main Web Site = http://www.lifehack.org TechNet Radio RSS = http://www.microsoft.com/events/podcasts/default.aspx?topic=&audience=&view=&pageId=x73&seriesID=Series-cc4e3db2-9212-43c5-a57b-d43fa31e6452.xml&podcast=rss&type=wma Main Web Site = http://www.microsoft.com/events/podcasts/default.aspx?seriesID=Series-cc4e3db2-9212-43c5-a57b-d43fa31e6452.xml&pageId=x73&WT.rss_ev=f Wrox All New Titles RSS = http://www.wrox.com/WileyCDA/feed/RSS_WROX_ALLNEW.xml Main Web Site = http://www.wrox.com

Read the article

Deploying BAM Data Control Application to WLS server

- by [email protected]

var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-15829414-1"); pageTracker._trackPageview(); } catch(err) {} Typically we would test our ADF pages that use BAM Data control using integrated wls server (ADRS). If we have to deploy this same application to a standalone WLS we have to make sure we have the BAM server connection created in WLS.unless we do that we may face runtime errors.In Development mode of WLS(Reference) For development-mode WebLogic Server, you can set the mode to OVERWRITE to test user names and passwords. You can set the mode by running setDomainEnv.cmd or setDomainEnv.sh with the following option added to the command. Add the following to the JAVA_PROPERTIES entry in the <FMW_HOME>/user_projects/domains/<yourdomain>/bin/setDomainEnv.sh file: -Djps.app.credential.overwrite.allowed=true In Production mode of WLS Enable MDS Create and/or Register your MDS repository. For more details refer this Edit adf-config.xml from your application and add the following tag <adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config"> <mds-config version="11.1.1.000"> <persistence-config> <metadata-store-usages> <metadata-store-usage default-cust-store="true" deploy-target="true" id="myRepos"> </metadata-store-usage> </metadata-store-usages> </persistence-config> </mds-config> </adf-mds-config>Deploy the application to WLS server after picking the appropriate repository during deployment from the MDS Repository dialog that pops up Enterprise Manager (Use these steps if using a version prior to 11gR1 PS1 release of JDeveloper) Go to EM (http://<host>:<port>/EMIn the left pane, deployments select Application1(your application)In the right pane, top dropdown select "System Mbean Browser->oracle.adf.share.connections->Server: AdminServer->Server: AdminServer->Application:<Appname>->ADFConnections"Right pane click "Operations->CreateConnection"Enter Connection Type as "BAMConnection"Enter the connection name same as the one defined in JdevClick "Invoke"Click "Return"Click on Operation->SaveNow in the ADFConnections in the navigator, select the connection just created and enter all the configuration details.Save and run the page. Enterprise Manager (Use these steps or the steps above if using 11gR1 PS1 or newer) Go to EM (http://<host>:<port>/EMIn the left pane, deployments select Application1(your application)In the right pane, click on "Application Deployment" to invoke to dropdown. In that select "ADF -> Configure ADF Connections"Select Connection Type as "BAM" from the drop downEnter Connection Type as to be the same as the one defined in JDevClick on "Create Connection". This should add a new row below under "BAM Connections"Select the new connection and click on the "Edit" icon. This should bring up a dialogSpecific appropriate values for all connection parameters - Username, password, BAM Server Host, BAM Server Port, Webtier Server Host, Webtier Server Port and BAM Webtier Protocol - and then click on OK to dismiss the dialogClick on "Apply"Run the page page.

Read the article

The new Auto Scaling Service in Windows Azure

- by shiju

One of the key features of the Cloud is the on-demand scalability, which lets the cloud application developers to scale up or scale down the number of compute resources hosted on the Cloud. Auto Scaling provides the capability to dynamically scale up and scale down your compute resources based on user-defined policies, Key Performance Indicators (KPI), health status checks, and schedules, without any manual intervention. Auto Scaling is an important feature to consider when designing and architecting cloud based solutions, which can unleash the real power of Cloud to the apps for providing truly on-demand scalability and can also guard the organizational budget for cloud based application deployment. In the past, you have had to leverage the the Microsoft Enterprise Library Autoscaling Application Block (WASABi) or a services like MetricsHub for implementing Automatic Scaling for your cloud apps hosted on the Windows Azure. The WASABi required to host your auto scaling block in a Windows Azure Worker Role for effectively implementing the auto scaling behaviour to your Windows Azure apps. The newly announced Auto Scaling service in Windows Azure lets you add automatic scaling capability to your Windows Azure Compute Services such as Cloud Services, Web Sites and Virtual Machine. Unlike WASABi hosted on a Worker Role, you don’t need to host any monitoring service for using the new Auto Scaling service and the Auto Scaling service will be available to individual Windows Azure Compute Services as part of the Scaling. Configure Auto Scaling for a Windows Azure Cloud Service Currently the Auto Scaling service supports Cloud Services, Web Sites and Virtual Machine. In this demo, I will be used a Cloud Services app with a Web Role and a Worker Role. To enable the Auto Scaling, select t your Windows Azure app in the Windows Azure management portal, and choose “SCLALE” tab. The Scale tab will show the all information regards with Auto Scaling. The below image shows that we have currently disabled the AutoScale service. To enable Auto Scaling, you need to choose either CPU or QUEUE. The QUEUE option is not available for Web Sites. The image below demonstrates how to configure Auto Scaling for a Web Role based on the utilization of CPU. We have configured the web role app for running with 1 to 5 Virtual Machine instances based on the CPU utilization with a range of 50 to 80%. If the aggregate utilization is becoming above above 80%, it will scale up instances and it will scale down instances when utilization is becoming below 50%. The image below demonstrates how to configure Auto Scaling for a Worker Role app based on the messages added into the Windows Azure storage Queue. We configured the worker role app for running with 1 to 3 Virtual Machine instances based on the Queue messages added into the Windows Azure storage Queue. Here we have specified the number of messages target per machine is 2000. The image below shows the summary of the Auto Scaling for the Cloud Service after configuring auto scaling service. Summary Auto Scaling is an extremely important behaviour of the Cloud applications for providing on-demand scalability without any manual intervention. Windows Azure provides greater support for enabling Auto Scaling for the apps deployed on the Windows Azure cloud platform. The new Auto Scaling service in Windows Azure lets you add automatic scaling capability to your Windows Azure Compute Services such as Cloud Services, Web Sites and Virtual Machine. In the new Auto Scaling service, you don’t have to host any monitor service like you have had in WASABi block. The Auto Scaling service is an excellent alternative to the manually hosting WASABi block in a Worker Role app.

Read the article

Validating Petabytes of Data with Regularity and Thoroughness

- by rickramsey

by Brian Zents When former Intel CEO Andy Grove said “only the paranoid survive,” he wasn’t necessarily talking about tape storage administrators, but it’s a lesson they’ve learned well. After all, tape storage is the last line of defense to prevent data loss, so tape administrators are extra cautious in making sure their data is secure. Not surprisingly, we are often asked for ways to validate tape media and the files on them. In the past, an administrator could validate the media, but doing so was often tedious or disruptive or both. The debut of the Data Integrity Validation (DIV) and Library Media Validation (LMV) features in the Oracle T10000C drive helped eliminate many of these pains. Also available with the Oracle T10000D drive, these features use hardware-assisted CRC checks that not only ensure the data is written correctly the first time, but also do so much more efficiently. Traditionally, a CRC check takes at least 25 seconds per 4GB file with a 2:1 compression ratio, but the T10000C/D drives can reduce the check to a maximum of nine seconds because the entire check is contained within the drive. No data needs to be sent to a host application. A time savings of at least 64 percent is extremely beneficial over the course of checking an entire 8.5TB T10000D tape. While the DIV and LMV features are better than anything else out there, what storage administrators really need is a way to check petabytes of data with regularity and thoroughness. With the launch of Oracle StorageTek Tape Analytics (STA) 2.0 in April, there is finally a solution that addresses this longstanding need. STA bundles these features into one interface to automate all media validation activities across all Oracle SL3000 and SL8500 tape libraries in an environment. And best of all, the validation process can be associated with the health checks an administrator would be doing already through STA. In fact, STA validates the media based on any of the following policies: Random Selection – Randomly selects media for validation whenever a validation drive in the standalone library or library complex is available. Media Health = Action – Selects media that have had a specified number of successive exchanges resulting in an Exchange Media Health of “Action.” You can specify from one to five exchanges. Media Health = Evaluate – Selects media that have had a specified number of successive exchanges resulting in an Exchange Media Health of “Evaluate.” You can specify from one to five exchanges. Media Health = Monitor – Selects media that have had a specified number of successive exchanges resulting in an Exchange Media Health of “Monitor.” You can specify from one to five exchanges. Extended Period of Non-Use – Selects media that have not had an exchange for a specified number of days. You can specify from 365 to 1,095 days (one to three years). Newly Entered – Selects media that have recently been entered into the library. Bad MIR Detected – Selects media with an exchange resulting in a “Bad MIR Detected” error. A bad media information record (MIR) indicates degraded high-speed access on the media. To avoid disrupting host operations, an administrator designates certain drives for media validation operations. If a host requests a file from media currently being validated, the host’s request takes priority. To ensure that the administrator really knows it is the media that is bad, as opposed to the drive, STA includes drive calibration and qualification features. In addition, validation requests can be re-prioritized or cancelled as needed. To ensure that a specific tape isn’t validated too often, STA prevents a tape from being validated twice within 24 hours via one of the policies described above. A tape can be validated more often if the administrator manually initiates the validation. When the validations are complete, STA reports the results. STA does not report simply a “good” or “bad” status. It also reports if media is even degraded so the administrator can migrate the data before there is a true failure. From that point, the administrators’ paranoia is relieved, as they have the necessary information to make a sound decision about the health of the tapes in their environment. About the Photograph Photograph taken by Rick Ramsey in Death Valley, California, May 2014 - Brian Follow OTN Garage on: Web | Facebook | Twitter | YouTube

Read the article

AdventureWorks2012 now available for all on SQL Azure

- by jamiet

Three days ago I tweeted this: Idea. MSFT could host read-only copies of all the [AdventureWorks] DBs up on #sqlazure for the SQL community to use. RT if agree #sqlfamily — Jamie Thomson (@jamiet) March 24, 2012 Evidently I wasn't the only one that thought this was a good idea because as you can see from the screenshot that tweet has, so far, been retweeted more than fifty times. Clearly there is a desire to see the AdventureWorks databases made available for the community to noodle around on so I am pleased to announce that as of today you can do just that - [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use* for their own means. *By use I mean "issue some SELECT statements". You don't have permission to issue INSERTs, UPDATEs, DELETEs or EXECUTEs I'm afraid - if you want to do that then you can get the bits and host it yourself. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected]: Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more that we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. OK, with the prickly subject of begging for cash out of the way let me share the details that you need to connect to [AdventureWorks2012] on SQL Azure: Server mhknbn2kdz.database.windows.net Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly That user sqlfamily has all the permissions required to enable you to query away to your heart's content. Here is the code that I used to set it up: CREATE USER sqlfamily FOR LOGIN sqlfamily;CREATE ROLE sqlfamilyrole;EXEC sp_addrolemember 'sqlfamilyrole','sqlfamily';GRANT VIEW DEFINITION ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT VIEW DATABASE STATE ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT SHOWPLAN TO sqlfamilyrole;EXEC sp_addrolemember 'db_datareader','sqlfamilyrole'; You can connect to the database using SQL Server Management Studio (instructions to do that are provided at Walkthrough: Connecting to SQL Azure via the SSMS) or you can use the web interface at https://mhknbn2kdz.database.windows.net: Lastly, just for a bit of fun I created a table up there called [dbo].[SqlFamily] into which you can leave a small calling card. Simply execute the following SQL statement (changing the values of course): INSERT [dbo].[SqlFamily]([Name],[Message],[TwitterHandle],[BlogURI])VALUES ('Your name here','Some Message','your twitter handle (optional)','Blog URI (optional)'); [Id] is an IDENTITY field and there is a default constraint on [DT] hence there is no need to supply a value for those. Note that you only have INSERT permissions, not UPDATE or DELETE so make sure you get it right first time! Any offensive or distasteful remarks will of course be deleted :) Thank you for reading this far and have fun using AdventureWorks on Azure. I hope it proves to be useful for some of you. @jamiet AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

Read the article

Release 17 is here!

- by Cheryl

Our training development team has been busy updating courses to keep pace with the new release of CRM On Demand. Release 17 is here! And I heard recently that it's one of our biggest releases ever. A lot of new features and functionality for you to take advantage of - too much for me to cover in this blog post. But, I thought I'd tell you about a few of my favorites - be sure to take a look at the What's New in Release 17 recording to see the full list, though...because I'm only going to touch on a few. Create your own look - okay, I'm starting with the fun stuff. But, there is a new customizable themes feature so that you can change the look of the application; colors, logo, the shape of the tabs. And it's really easy. There's also a whole new library of ready-made themes for you to pick from if you just want to go with one of those. Use this new feature to match the look of your company logo and color scheme. Or blaze new trails. You can create the look for the whole company, or a different look for each CRM On Demand role. This might especially come in handy if you're using the Partner Relationship Management (PRM) capabilities of CRM On Demand - you can create themes for your partner-facing roles to provide branded partner portals. Speaking of PRM - there are enhancements in this release to help companies better manage their partner relationships. A new Deal Registration object, which is separate from the Opportunity record, and better Special Pricing Request and Marketing Development Fund Request processes, give a lot more flexibility in how companies can build and manage their relationships with partners. Some new options for Forecasts in in Release 17, too. You can now have more than one type of forecast generated each forecast period. For example, you might need to see a forecast of the total opportunity revenue for your sales team, as well as on that breaks down revenue by product. The forecast definition now lets you do that. Other options allow you to make submitting forecasts easier, split opportunity revenue across the team and forecast that split appropriately. And - look for the new Forecast subject area in Answers, for building custom forecast reports. Ever wish you could use Workflow Rules to automatically reassign leads if they haven't been followed up on...or to email a manager if the status of a service request isn't changed after a specified period of time? Then check out the new Wait action for workflows. I think you'll be happy. Ok, enough for today. There is a lot to Release 17 that I didn't mention - a lot has been added for our Life Science industry edition, some new data visibility options, a new Data Loader tool, and more. Stay tuned for more blog posts about these and other Release 17 features in the coming weeks. In the meantime, don't forget about all of the resources we have for you to learn more (see my Learning About Release 17 blog post for details).

Read the article

The Evolution of Television and Home Entertainment

- by Bill Evjen

This is a group that is focused on entertainment in the aviation industry. I am attending their conference for the first time as it relates to my job at Swank Motion Pictures and what we do for our various markets. I will post my notes here. The Evolution of Television and Home Entertainment by Patrick Cosson, Veebeam TV has been the center of living rooms for sometime. Conversations and culture evolve around the TV. The way we consume this content has dramatically been changing. After TV, we had the MTV revolution of TV. It has created shorter attention spans, it made us more materialistic, narcissistic, and not easily impressed. Then we came to the Internet. The amount of content has expanded. It contains a ton of user-generated content, provides filtering, organization, distribution. We now have a problem. We are in the age of digital excess. We can access whatever we want. In conjunction with this – we are moving. The challenge we have now is curation. The trends we see: rapid shift from scheduled to on demand consumption. A move to Internet protocols from cable Rapid fragmentation of media a transition from the TV set to a variety of screens Social connections bring mediators and amplifiers. TiVo – the shift to on demand It is because of a time-crunch Provides personal experiences Once old consumption habits are changed, there is no way back! Experiences are that people are loading up content and then bringing it with them on planes, to hotels, etc. Rapid fragmentation of media sources Many new professional content sources and channels, the rise of digital distribution, and the rise of user-generated content contribute to the wealth of content sources and abundant choice. Netflix, BBC iPlayer, hulu, Pandora, iTunes, Amazon Video, Vudu, Voddler, Spotify (these companies didn’t exist 5 years ago). People now expect this kind of consumption. People are now thinking how to deliver all these tools. Transition from the TV set to multi-screens The TV screen has traditionally been the dominant consumption screen for TV and video. Now the PC, game consoles, and various mobile devices are rapidly becoming common video devices. Multi-screens are now the norm. Social connections becoming key mediators What increasingly funnels traffic on the web, social networking enablers, will become an integral part of the discovery, consumption and sharing model for Television. The revolution will be broadcasted on Facebook and Twitter. There is business disruption There are a lot of new entrants Rapid internationalization Increasing competition from existing media players A fragmenting audience base Web browser Freedom to access any site The fight over the walled garden Most devices are not powerful enough to support a full browser PC will always be present in the living room Wireless link between PC and TV Output 1080p, plays anything, secure Key players and their challenges Services Internet media is increasingly interconnected to social media and publicly shared UGC Content delivery moving to IPTV Rights management issues are creating silos and hindering a great user experience and growth Devices Devices are becoming people’s windows into all kinds of media from all kinds of sources There won’t be a consolidation of the device landscape, rather the opposite Finding the right niche makes the most sense. We are moving to an on demand world of streaming world. People want full access to anything.

Read the article

Web Application Integration Steps in OAM 11gR2 (High Level)

- by Venkata Srikanth

Install OAM, Webtier (OHS) and WebGate as per the standard installation steps. Create a WebGate instance (i.e deploy WebGate) A WebGate instance must be created that will copy required bits of agent from WEBGATE_HOME to WebGate instance location that shares the same INSTANCE_HOME with OHS ./deployWebGateInstance.sh –w /Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 Note: Here –w flag indicates OHS instance folder and –oh indicates the WebGate Oracle home Configure WebGate In the webgate configuration the EditHttpdConf utility will copy OUI instantiated apache_webgate.template from WEBGATE_HOME to webgate instance location (renamed to webgate.conf), and update httpd.conf with one additional line to include webgate.conf. export LD_LIBRARY_PATH=$ LD_LIBRARY_PATH:/Oracle/Middleware/Oracle_WT1/lib Navigate to /Oracle/Middleware/Oracle_OAMWebGate1/webgate/ohs/tools/setup/InstallTools ./EditHttpdConf –w /Oracle/Middleware/Oracle_WT1/instances/instace1/config/OHS/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 –o webgate.conf Register WebGate Use RREG tool to register the OAM 11G WebGate Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/input Edit OAM11Grequest.xml. Change the specific xml content to include the weblogic admin URL, agentBaseURL, host identifier etc.. Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/bin Set permissions to oamreg.sh à chmod 777 oamreg.sh Edit oamreg.sh and set OAM_REG_HOME=/Oracle/Middleware/Oracle_IDM1/oam/server/rreg ./oamreg.sh inband input/OAM11Grequest.xml Enter the WebLogic admin credentials when prompted. After performing the above steps, there will be two artifcats created under Oracle/Middleware/Oracle_IDM1/oam/server/rreg/output, namely ObAccessClient.xml (Stroing webgate config parameters) and cwallet.sso (storing the agent key). These files must be copied to WebGate instance config folder (/Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1/webgate/config) Restart OHS Deploy the web application (myApp) in WebLogic application server Proxy Configuration in OHS The mod_wl_ohs module enables requests to be proxied from Oracle HTTP Server 11g to Oracle WebLogic Server. Navigate to /Oracle/Middleware/Oracle_WT1/instances/instance1/config/OHS/ohs1 Edit mod_wl_ohs.conf file to include the following: <IfModule weblogic_module> WebLogicHost <WEBLOGIC_HOST> WebLogicPort <WEBLOGIC_PORT> # Debug ON # WLLogFile /tmp/weblogic.log MatchExpression *.jsp </IfModule> <Location /myApp> SetHandler weblogic-handler # PathTrim /weblogic # ErrorPage http:/WEBLOGIC_HOME:WEBLOGIC_PORT/ </Location> Note: Here WEBLOGIC_HOST and WEBLOGIC_PORT are the WebLogic admin server host and port respectively Restart OHS. Now if we access the web application URL with OHS host and port (Ex: http://OHS_HOST:<OHS_PORT>/myApp) so that the requests will be proxied to WebLogic server. Create a new application domain Login to OAM Admin Console Navigate to Shared Componentsà Authentication Schemesà Create Authentication Scheme (Ex: LDAP Auth Scheme. Here the scheme is assoicated with LDAP Authentication Module) Navigate to Policy Configuration à Application Domain à Create Application Domain Enter the Application Domain Name and Click Apply. Navigate to Resources tab and add the resource urls (Web Application URLs that needs to be protected) Navigate to Authentication Policy tab à Create a new authentication ploicy by providing the Resource URLs (The sample Web Application URLs) and Authentication Scheme. Navigate to Authorization Policy tab à Create a new authorization policy à Enter authorization policy name and navigate to Resource Tab à Attach the Reource URL, Host Identifiers here. Navigate to Conditions tab à Add the conditions like whom to allow and whom to deny access. Navigate to Rules tab à Crate the Allow Rule and Deny Rule with the available conditions from the previous step so that the Authorization Policy may authorize the logins. Navigate to Resources tab and attach the Authentication and Authorization plocies created in the above steps. Test the Web Application Integration.

Read the article

Making the most of next weeks SharePoint 2010 developer training

- by Eric Nelson

[you can still register if you are free on the afternoons of 9th to 11th – UK time] We have 50+ registrations with more coming in – which is fantastic. Please read on to make the most of the training. Background We have structured the training to make sure that you can still learn lots during the three days even if you do not have SharePoint 2010 installed. Additionally the course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Which means if you have zero time between now and next Wednesday then you are still good to go. But if you can do some pre-work you will likely get even more out of the three days. Step 1: Check out the topics and resources available on-demand The course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Take a lap around the SharePoint 2010 Training Course on Channel 9 Download the SharePoint Developer Training Kit Step 2: Use a pre-configured Virtual Machine which you can download (best start today – it is large!) Consider using the VM we created If you don't have access to SharePoint 2010. You will need a 64bit host OS and bare minimum of 4GB of RAM. 8GB recommended. Virtual PC can not be used with this VM – Virtual PC only supports 32bit guests. The 2010-7a Information Worker VM gives you everything you need to develop for SharePoint 2010. Watch the Video on how to use this VM Download the VM Remember you only need to download the “parts” for the 2010-7a VM. There are 3 subtly different ways of using this VM: Easiest is to follow the advice of the video and get yourself a host OS of Windows Server 2008 R2 with Hyper-V and simply use the VM Alternatively you can take the VHD and create a “Boot to VHD” if you have Windows 7 Ultimate or Enterprise Edition. This works really well – especially if you are already familiar with “Boot to VHD” (This post I did will help you get started) Or you can take the VHD and use an alternative VM tool such as VirtualBox if you have a different host OS. NB: This tends to involve some work to get everything running fine. Check out parts 1 to 3 from Rolly and if you go with Virtual Box use an IDE controller not SATA. SATA will blue screen. Note in the screenshot below I also converted the vhd to a vmdk. I used the FREE Starwind Converter to do this whilst I was fighting blue screens – not sure its necessary as VirtualBox does now work with VHDs. or Step 3 – Install SharePoint 2010 on a 64bit Windows 7 or Vista Host I haven’t tried this but it is now supported. Check out MSDN. Final notes: I am in the process of securing a number of hosted VMs for ISVs directly managed by my team. Your Architect Evangelist will have details once I have them! Else we can sort out on the Wed. Regrettably I am unable to give folks 1:1 support on any issues around Boot to VHD, 3rd party VM products etc. Related Links: Check you are fully plugged into the work of my team – have you done these simple steps including joining our new LinkedIn group?

Read the article

Analytics in an Omni-Channel World

- by David Dorf

Retail has been around ever since mankind started bartering. The earliest transactions were very specific to the individuals buying and selling, then someone had the bright idea to open a store. Those transactions were a little more generic, but the store owner still knew his customers and what they wanted. As the chains rolled out, customer intimacy was sacrificed for scale, and retailers began to rely on segments and clusters. But thanks to the widespread availability of data and the technology to convert said data into information, retailers are getting back to details. The retail industry is following a maturity model for analytics that is has progressed through five stages, each delivering more value than the previous. Store Analytics Brick-and-mortar retailers (and pure-play catalogers as well) that collect anonymous basket-level data are able to get some sense of demand to help with allocation decisions. Promotions and foot-traffic can be measured to understand marketing effectiveness and perhaps focus groups can help test ideas. But decisions are influenced by the majority, using faceless customer segments and aggregated industry data points. Loyalty programs help a little, but in many cases the cost outweighs the benefits. Web Analytics The Web made it much easier to collect data on specific, yet still anonymous consumers using cookies to track visits. Clickstreams and product searches are analyzed to understand the purchase journey, gauge demand, and better understand up-selling opportunities. Personalization begins to allow retailers target market consumers with recommendations. Cross-Channel Analytics This phase is a minor one, but where most retailers probably sit today. They are able to use information from one channel to bolster activities in another. However, there are technical challenges combining data silos so its not an easy task. But for those retailers that are able to perform analytics on both sources of data, the pay-off is pretty nice. Revenue per customer begins to go up as customers have a better brand experience. Mobile & Social Analytics Big data technologies are enabling a 360-degree view of the customer by incorporating psychographic data from social sites alongside traditional demographic data. Retailers can track individual preferences, opinions, hobbies, etc. in order to understand a consumer's motivations. Using mobile devices, consumers can interact with brands anywhere, anytime, accessing deep product information and reviews. Mobile, combined with a loyalty program, presents an opportunity to put shopping into geographic context, understanding paths to the store, patterns within the store, and be an always-on advertising conduit. Omni-Channel Analytics All this data along with the proper technology represents a new paradigm in which the clock is turned back and retail becomes very personal once again. Rich, individualized data better illuminates demand, allows for highly localized assortments, and helps tailor up-selling. Interactions with all channels help build an accurate profile of each consumer, and allows retailers to tailor the retail experience to meet the heightened expectations of today's sophisticated shopper. And of course this culminates in greater customer satisfaction and business profitability.

Read the article

GoldenGate 12c - MySQL Active-Active Replication Setup

- by Jinyu Wang-Oracle

Active-active (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data. Active-Active replication is often needed for high availability, load balancing and scaling out purposes. Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems. Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105) Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows. TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions.

Read the article

Custom Templates: Using user exits

- by Anthony Shorten

One of the features of Oracle Utilities Application Framework V4.1 is the ability to use templates and user exits to extend the base configuration files. The configuration files used by the product are based upon a set of templates shipped with the product. When the configureEnv utility asks for configuration settings they are stored in a configuration file ENVIRON.INI which outlines the environment settings. These settings are then used by the initialSetup utility to populate the various configuration files used by the product using templates located in the templates directory of the installation. Now, whilst the majority of the installations at any site are non-production and the templates provided are generally adequate for that need, there are circumstances where extension of templates are needed to take advantage of more advanced facilities (such as advanced security and environment settings). The issue then becomes that if you alter the configuration files manually (directly or indirectly) then you may lose all your custom settings the next time you run initialSetup. To counter this we allow customers to either override templates with their own template or we now provide user exits in the templates to add fragments of configuration unique to that part of the configuration file. The latter means that the base template is still used but additions are included to provide the extensions. The provision of custom templates is supported but as soon as you use a custom template you are then responsible for reflecting any changes we put in the base template over time. Not a big task but annoying if you have to do it for multiple copies of the product. I prefer to use user exits as they seem to represent the least effort solution. The way to find the user exits available is to either read the Server Administration Guide that comes with your product or look at individual templates and look for the lines: #ouaf_user_exit <user exit name> Where <user exit name> is the name of the user exit. User exits are not always present but are in places that we feel are the most likely to be changed. If a user exit does not exist the you can always use a custom template instead. Now lets show an example. By default, the product generates a config.xml file to be used with Oracle WebLogic. This configuration file has the basic setting contained in it to manage the product. If you want to take advantage of the Oracle WebLogic advanced settings, you can use the console to make those changes and it will be reflected in the config.xml automatically. To retain those changes across invocations of initialSetup, you need to alter the template that generates the config.xml or use user exits. The technique is this. Make the change in the console and when you save the change, WebLogic will reflect it in the config.xml for you. Compare the old version and new version of the config.xml and determine what to add and then find the user exit to put it in by examining the base template. For example, by default, the console is not automatically deployed (it is deployed on demand) in the base config.xml. To make the console deploy, you can add the following line to the templates/CM_config.xml.win.exit_3.include file (for windows) or templates/CM_config.xml.exit_3.include file (for linux/unix): <internal-apps-deploy-on-demand-enabled>false</internal-apps-deploy-on-demand-enabled> Now run initialSetup to reflect the change and if you check the splapp/config/config.xml file you will see the change applied for you. Now how did I know which include file? I check the template for config.xml and found there was an user exit at the right place. I prefixed my include filename with "CM_" to denote it as a custom user exit. This will tell the upgrade tools to leave that file alone whenever you decide to upgrade (or even apply fixes). User exits can be powerful and allow customizations to be added for advanced configuration. You will see products using Oracle Utilities Application Framework use this exits themselves (usually prefixed with the product code). You are also taking advantage of them.

Search Results

Search found 13904 results on 557 pages for 'host on demand'.

Page 117/557 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124 | Next Page >

- by Fantastic Fourier

- by sourabhtaletiya

- by Bevor

- by AeroBuffalo

- by Rilindo

- by Rilindo

- by Antonis Christofides

- by Hesey

- by Hunt

- by Radek Hladík

- by Alex

- by Malcolm Jones

- by dabito

- by kennedysteve

- by [email protected]

- by shiju

- by rickramsey

- by jamiet

- by Cheryl

- by Bill Evjen

- by Venkata Srikanth

- by Eric Nelson

- by David Dorf

- by Jinyu Wang-Oracle

- by Anthony Shorten

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124 | Next Page >