Search Results

Search found 3356 results on 135 pages for 'removing'.

Page 117/135 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Reliable file copy (move) process - mostly Unix/Linux

  - by mfinni

  Short story : We have a need for a rock-solid reliable file mover process. We have source directories that are often being written to that we need to move files from. The files come in pairs - a big binary, and a small XML index. We get a CTL file that defines these file bundles. There is a process that operates on the files once they are in the destination directory; that gets rid of them when it's done. Would rsync do the best job, or do we need to get more complex? Long story as follows : We have multiple sources to pull from : one set of directories are on a Windows machine (that does have Cygwin and an SSH daemon), and a whole pile of directories are on a set of SFTP servers (Most of these are also Windows.) Our destinations are a list of directories on AIX servers. We used to use a very reliable Perl script on the Windows/Cygwin machine when it was our only source. However, we're working on getting rid of that machine, and there are other sources now, the SFTP servers, that we cannot presently run our own scripts on. For security reasons, we can't run the copy jobs on our AIX servers - they have no access to the source servers. We currently have a homegrown Java program on a Linux machine that uses SFTP to pull from the various new SFTP source directories, copies to a local tmp directory, verifies that everything is present, then copies that to the AIX machines, and then deletes the files from the source. However, we're finding any number of bugs or poorly-handled error checking. None of us are Java experts, so fixing/improving this may be difficult. Concerns for us are: With a remote source (SFTP), will rsync leave alone any file still being written? Some of these files are large. From reading the docs, it seems like rysnc will be very good about not removing the source until the destination is reliably written. Does anyone have experience confirming or disproving this? Additional info We will be concerned about the ingestion process that operates on the files once they are in the destination directory. We don't want it operating on files while we are in the process of copying them; it waits until the small XML index file is present. Our current copy job are supposed to copy the XML file last. Sometimes the network has problems, sometimes the SFTP source servers crap out on us. Sometimes we typo the config files and a destination directory doesn't exist. We never want to lose a file due to this sort of error. We need good logs If you were presented with this, would you just script up some rsync? Or would you build or buy a tool, and if so, what would it be (or what technologies would it use?) I (and others on my team) are decent with Perl.

  Read the article

• Nginx reverse proxy with separate aliases

  - by gabeDel

  Interesting question I have this python code: import sys, bottle, gevent from bottle import * from gevent import * from gevent.wsgi import WSGIServer @route("/") def index(): yield "/" application=bottle.default_app() WSGIServer(('', port), application, spawn=None).serve_forever() that runs standalone with nignx infront of it as a reverse proxy. Now each of these pieces of code run separately but I run multiple of these per domain per project(directory) but the code thinks for some reason that it is top level and its not so when you go to mydomain.com/something it works but if you go to mydomain.com/something/ you will get an error. No I have tested and figured out that nginx is stripping the "something" from the request/query so that when you go to mydomain.com/something/ the code thinks you are going to mydomain.com// how do I get nginx to stop removing this information? Nginx site code: upstream mydomain { server 127.0.0.1:10100 max_fails=5 fail_timeout=10s; } upstream subdirectory { server 127.0.0.1:10199 max_fails=5 fail_timeout=10s; } server { listen 80; server_name mydomain.com; access_log /var/log/nginx/access.log; location /sub { proxy_pass http://subdirectory/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } location /subdir { proxy_pass http://subdirectory/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } }

  Read the article

• Windows 7 booting and startup repair issues

  - by aardvark

  I have a MSI FR720 laptop with Windows 7 and Lubuntu partions. For quite a while (6 months or so) I've been having issues booting from my hard drive, it'd take me between 5 minutes and several hours for me to be able to have it recognize the hard drive as a bootable device. I did several disk checks on it, and my hard drive seems in perfect condition, and the fact that booting would usually only work after removing the hard drive and trying to reset it in its slot or lightly shaking it makes me think it had something to do with the connection in the hard drive slot as opposed to the hard drive itself. I was having particular issues with it detecting the hard drive today so I decided to try booting it from an external hard drive dock. It detected it first try and so far has had no problems finding the bootable partitions on my hard drive. When I selected my Windows 7 partition from the boot menu it said that it hadn't been shut down properly last time and needed startup repair. I've done this several times over the last 6 months, so this is hardly unusual. I do startup repair, it fails, and then I try to do a system restore. The system restore also failed, and it says that no files were changed. I restart and try it again. However, this time when I get to the startup repair it's not detecting a Windows OS. I tried clicking next and doing a startup repair but the repair is always failing. If I ignore the startup repair option and instead select "Launch windows normally" it will get to the windows animation, stop halfway through and then crash into a BSoD. I can't read the error on the screen because it immediately switches to back and tries to restart. This is my first time asking a question like this online, so let me know if I need to provide any extra information and I'll do my best to give it I tried using diskpart to find the list of partitions and see if one's labelled as an active partition, but it says that no disk were detected. I can run Lubuntu just fine. I can also see all of my Windows 7 files from it EDIT: The startup repair diagnosis and repair log is this: -- Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: Check for updates Result: Completed successfully. Error code = 0x0 Time taken = 15ms Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Time taken = 31ms Root cause found. If a hard disk is installed, it is not responding. -- Any chance that this is a result of me doing this through an external dock through a USB drive?

  Read the article

• I am having a problem of class cast exception. Can anyone please help me out?

  - by Piyush

  This is my code: package com.example.userpage; import android.app.Activity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.widget.Button; import android.widget.EditText; import android.widget.TextView; public class UserPage extends Activity { String tv,tv1; EditText name,pass; TextView x,y; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Button button = (Button) findViewById(R.id.widget44); button.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { name.setText(" "); pass.setText(" "); } }); x = (TextView) findViewById(R.id.widget46); y = (TextView) findViewById(R.id.widget47); name = (EditText)findViewById(R.id.widget41); pass = (EditText)findViewById(R.id.widget42); Button button1 = (Button) findViewById(R.id.widget45); button1.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { tv= name.getText().toString(); tv1 = pass.getText().toString(); x.setText(tv); y.setText(tv1); } }); } } And this is my log cat: 02-16 12:24:30.488: DEBUG/AndroidRuntime(973): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 02-16 12:24:30.488: DEBUG/AndroidRuntime(973): CheckJNI is ON 02-16 12:24:31.208: DEBUG/AndroidRuntime(973): --- registering native functions --- 02-16 12:24:33.498: DEBUG/AndroidRuntime(973): Shutting down VM 02-16 12:24:33.537: DEBUG/dalvikvm(973): Debugger has detached; object registry had 1 entries 02-16 12:24:33.537: INFO/AndroidRuntime(973): NOTE: attach of thread 'Binder Thread #3' failed 02-16 12:24:34.917: DEBUG/AndroidRuntime(981): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 02-16 12:24:34.927: DEBUG/AndroidRuntime(981): CheckJNI is ON 02-16 12:24:35.617: DEBUG/AndroidRuntime(981): --- registering native functions --- 02-16 12:24:38.029: INFO/ActivityManager(67): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=com.example.userpage/.UserPage } 02-16 12:24:38.129: DEBUG/AndroidRuntime(981): Shutting down VM 02-16 12:24:38.160: DEBUG/dalvikvm(981): Debugger has detached; object registry had 1 entries 02-16 12:24:38.168: INFO/AndroidRuntime(981): NOTE: attach of thread 'Binder Thread #3' failed 02-16 12:25:12.028: DEBUG/AndroidRuntime(990): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 02-16 12:25:12.038: DEBUG/AndroidRuntime(990): CheckJNI is ON 02-16 12:25:12.708: DEBUG/AndroidRuntime(990): --- registering native functions --- 02-16 12:25:15.178: DEBUG/dalvikvm(176): GC_EXPLICIT freed 114 objects / 5880 bytes in 115ms 02-16 12:25:15.318: DEBUG/PackageParser(67): Scanning package: /data/app/vmdl25170.tmp 02-16 12:25:15.588: INFO/PackageManager(67): Removing non-system package:com.example.userpage 02-16 12:25:15.597: INFO/ActivityManager(67): Force stopping package com.example.userpage uid=10036 02-16 12:25:15.648: INFO/Process(67): Sending signal. PID: 916 SIG: 9 02-16 12:25:15.877: INFO/UsageStats(67): Unexpected resume of com.android.launcher while already resumed in com.example.userpage 02-16 12:25:17.028: WARN/InputManagerService(67): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@4400ecf8 02-16 12:25:17.928: DEBUG/PackageManager(67): Scanning package com.example.userpage 02-16 12:25:17.949: INFO/PackageManager(67): Package com.example.userpage codePath changed from /data/app/com.example.userpage-1.apk to /data/app/com.example.userpage-2.apk; Retaining data and using new 02-16 12:25:17.987: INFO/PackageManager(67): /data/app/com.example.userpage-2.apk changed; unpacking 02-16 12:25:18.037: DEBUG/installd(35): DexInv: --- BEGIN '/data/app/com.example.userpage-2.apk' --- 02-16 12:25:18.737: DEBUG/dalvikvm(997): DexOpt: load 81ms, verify 112ms, opt 6ms 02-16 12:25:18.768: DEBUG/installd(35): DexInv: --- END '/data/app/com.example.userpage-2.apk' (success) --- 02-16 12:25:18.799: INFO/ActivityManager(67): Force stopping package com.example.userpage uid=10036 02-16 12:25:18.808: WARN/PackageManager(67): Code path for pkg : com.example.userpage changing from /data/app/com.example.userpage-1.apk to /data/app/com.example.userpage-2.apk 02-16 12:25:18.839: WARN/PackageManager(67): Resource path for pkg : com.example.userpage changing from /data/app/com.example.userpage-1.apk to /data/app/com.example.userpage-2.apk 02-16 12:25:18.868: DEBUG/PackageManager(67): Activities: com.example.userpage.UserPage 02-16 12:25:19.297: INFO/installd(35): move /data/dalvik-cache/data@[email protected]@classes.dex -> /data/dalvik-cache/data@[email protected]@classes.dex 02-16 12:25:19.297: DEBUG/PackageManager(67): New package installed in /data/app/com.example.userpage-2.apk 02-16 12:25:19.598: DEBUG/dalvikvm(67): GC_FOR_MALLOC freed 7979 objects / 516856 bytes in 246ms 02-16 12:25:20.498: INFO/ActivityManager(67): Force stopping package com.example.userpage uid=10036 02-16 12:25:20.708: DEBUG/dalvikvm(129): GC_EXPLICIT freed 124 objects / 5672 bytes in 157ms 02-16 12:25:21.838: DEBUG/dalvikvm(67): GC_EXPLICIT freed 4208 objects / 236264 bytes in 419ms 02-16 12:25:21.918: WARN/RecognitionManagerService(67): no available voice recognition services found 02-16 12:25:22.127: INFO/installd(35): unlink /data/dalvik-cache/data@[email protected]@classes.dex 02-16 12:25:22.478: DEBUG/AndroidRuntime(990): Shutting down VM 02-16 12:25:22.488: DEBUG/dalvikvm(990): Debugger has detached; object registry had 1 entries 02-16 12:25:22.588: INFO/AndroidRuntime(990): NOTE: attach of thread 'Binder Thread #3' failed 02-16 12:25:24.137: DEBUG/AndroidRuntime(1003): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 02-16 12:25:24.147: DEBUG/AndroidRuntime(1003): CheckJNI is ON 02-16 12:25:24.817: DEBUG/AndroidRuntime(1003): --- registering native functions --- 02-16 12:25:27.450: INFO/ActivityManager(67): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=com.example.userpage/.UserPage } 02-16 12:25:27.628: DEBUG/AndroidRuntime(1003): Shutting down VM 02-16 12:25:27.780: INFO/AndroidRuntime(1003): NOTE: attach of thread 'Binder Thread #3' failed 02-16 12:25:28.018: DEBUG/dalvikvm(1003): Debugger has detached; object registry had 1 entries 02-16 12:25:28.148: INFO/ActivityManager(67): Start proc com.example.userpage for activity com.example.userpage/.UserPage: pid=1010 uid=10036 gids={} 02-16 12:25:30.308: DEBUG/AndroidRuntime(1010): Shutting down VM 02-16 12:25:30.308: WARN/dalvikvm(1010): threadid=1: thread exiting with uncaught exception (group=0x4001d800) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): FATAL EXCEPTION: main 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.example.userpage/com.example.userpage.UserPage}: java.lang.ClassCastException: android.widget.TextView 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2663) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2679) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.ActivityThread.access$2300(ActivityThread.java:125) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:2033) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.os.Handler.dispatchMessage(Handler.java:99) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.os.Looper.loop(Looper.java:123) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.ActivityThread.main(ActivityThread.java:4627) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at java.lang.reflect.Method.invokeNative(Native Method) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at java.lang.reflect.Method.invoke(Method.java:521) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:868) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at dalvik.system.NativeStart.main(Native Method) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): Caused by: java.lang.ClassCastException: android.widget.TextView 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at com.example.userpage.UserPage.onCreate(UserPage.java:35) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2627) 02-16 12:25:30.388: ERROR/AndroidRuntime(1010): ... 11 more 02-16 12:25:30.438: WARN/ActivityManager(67): Force finishing activity com.example.userpage/.UserPage 02-16 12:25:31.088: WARN/ActivityManager(67): Activity pause timeout for HistoryRecord{43f164f8 com.example.userpage/.UserPage} 02-16 12:25:32.588: DEBUG/dalvikvm(292): GC_EXPLICIT freed 46 objects / 2240 bytes in 6282ms 02-16 12:25:35.267: INFO/Process(1010): Sending signal. PID: 1010 SIG: 9 02-16 12:25:35.468: WARN/InputManagerService(67): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@43e60a90 02-16 12:25:35.900: INFO/ActivityManager(67): Process com.example.userpage (pid 1010) has died. 02-16 12:25:38.278: DEBUG/dalvikvm(176): GC_EXPLICIT freed 172 objects / 12280 bytes in 127ms 02-16 12:25:43.011: WARN/ActivityManager(67): Activity destroy timeout for HistoryRecord{43f164f8 com.example.userpage/.UserPage} 02-16 12:28:12.698: DEBUG/AndroidRuntime(1019): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 02-16 12:28:12.711: DEBUG/AndroidRuntime(1019): CheckJNI is ON 02-16 12:28:13.367: DEBUG/AndroidRuntime(1019): --- registering native functions --- 02-16 12:28:15.998: DEBUG/dalvikvm(176): GC_EXPLICIT freed 114 objects / 5888 bytes in 183ms 02-16 12:28:16.539: DEBUG/PackageParser(67): Scanning package: /data/app/vmdl25171.tmp 02-16 12:28:16.867: INFO/PackageManager(67): Removing non-system package:com.example.userpage 02-16 12:28:16.867: INFO/ActivityManager(67): Force stopping package com.example.userpage uid=10036 02-16 12:28:17.277: DEBUG/PackageManager(67): Scanning package com.example.userpage 02-16 12:28:17.308: INFO/PackageManager(67): Package com.example.userpage codePath changed from /data/app/com.example.userpage-2.apk to /data/app/com.example.userpage-1.apk; Retaining data and using new 02-16 12:28:17.328: INFO/PackageManager(67): /data/app/com.example.userpage-1.apk changed; unpacking 02-16 12:28:17.367: DEBUG/installd(35): DexInv: --- BEGIN '/data/app/com.example.userpage-1.apk' --- 02-16 12:28:18.357: DEBUG/dalvikvm(1026): DexOpt: load 85ms, verify 114ms, opt 6ms 02-16 12:28:18.398: DEBUG/installd(35): DexInv: --- END '/data/app/com.example.userpage-1.apk' (success) --- 02-16 12:28:18.428: INFO/ActivityManager(67): Force stopping package com.example.userpage uid=10036 02-16 12:28:18.438: WARN/PackageManager(67): Code path for pkg : com.example.userpage changing from /data/app/com.example.userpage-2.apk to /data/app/com.example.userpage-1.apk 02-16 12:28:18.477: WARN/PackageManager(67): Resource path for pkg : com.example.userpage changing from /data/app/com.example.userpage-2.apk to /data/app/com.example.userpage-1.apk 02-16 12:28:18.477: DEBUG/PackageManager(67): Activities: com.example.userpage.UserPage 02-16 12:28:18.977: INFO/installd(35): move /data/dalvik-cache/data@[email protected]@classes.dex -> /data/dalvik-cache/data@[email protected]@classes.dex 02-16 12:28:18.988: DEBUG/PackageManager(67): New package installed in /data/app/com.example.userpage-1.apk 02-16 12:28:19.528: DEBUG/dalvikvm(67): GC_FOR_MALLOC freed 6733 objects / 459728 bytes in 211ms 02-16 12:28:20.138: INFO/ActivityManager(67): Force stopping package com.example.userpage uid=10036 02-16 12:28:20.368: DEBUG/dalvikvm(129): GC_EXPLICIT freed 892 objects / 48744 bytes in 175ms 02-16 12:28:21.317: WARN/RecognitionManagerService(67): no available voice recognition services found 02-16 12:28:22.827: DEBUG/dalvikvm(67): GC_EXPLICIT freed 3877 objects / 241128 bytes in 452ms 02-16 12:28:22.979: INFO/installd(35): unlink /data/dalvik-cache/data@[email protected]@classes.dex 02-16 12:28:23.277: DEBUG/AndroidRuntime(1019): Shutting down VM 02-16 12:28:23.307: DEBUG/dalvikvm(1019): Debugger has detached; object registry had 1 entries 02-16 12:28:23.328: INFO/AndroidRuntime(1019): NOTE: attach of thread 'Binder Thread #3' failed 02-16 12:28:24.989: DEBUG/AndroidRuntime(1032): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 02-16 12:28:24.989: DEBUG/AndroidRuntime(1032): CheckJNI is ON 02-16 12:28:25.888: DEBUG/AndroidRuntime(1032): --- registering native functions --- 02-16 12:28:28.588: INFO/ActivityManager(67): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=com.example.userpage/.UserPage } 02-16 12:28:28.888: DEBUG/AndroidRuntime(1032): Shutting down VM 02-16 12:28:28.997: DEBUG/dalvikvm(1032): Debugger has detached; object registry had 1 entries 02-16 12:28:29.038: INFO/AndroidRuntime(1032): NOTE: attach of thread 'Binder Thread #3' failed 02-16 12:28:30.417: INFO/ActivityManager(67): Start proc com.example.userpage for activity com.example.userpage/.UserPage: pid=1039 uid=10036 gids={} 02-16 12:28:32.588: DEBUG/AndroidRuntime(1039): Shutting down VM 02-16 12:28:32.598: WARN/dalvikvm(1039): threadid=1: thread exiting with uncaught exception (group=0x4001d800) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): FATAL EXCEPTION: main 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.example.userpage/com.example.userpage.UserPage}: java.lang.ClassCastException: android.widget.TextView 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2663) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2679) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.ActivityThread.access$2300(ActivityThread.java:125) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:2033) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.os.Handler.dispatchMessage(Handler.java:99) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.os.Looper.loop(Looper.java:123) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.ActivityThread.main(ActivityThread.java:4627) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at java.lang.reflect.Method.invokeNative(Native Method) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at java.lang.reflect.Method.invoke(Method.java:521) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:868) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at dalvik.system.NativeStart.main(Native Method) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): Caused by: java.lang.ClassCastException: android.widget.TextView 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at com.example.userpage.UserPage.onCreate(UserPage.java:34) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2627) 02-16 12:28:32.648: ERROR/AndroidRuntime(1039): ... 11 more 02-16 12:28:32.698: WARN/ActivityManager(67): Force finishing activity com.example.userpage/.UserPage 02-16 12:28:32.967: DEBUG/dalvikvm(292): GC_EXPLICIT freed 46 objects / 2240 bytes in 6840ms 02-16 12:28:33.247: WARN/ActivityManager(67): Activity pause timeout for HistoryRecord{43ee7b70 com.example.userpage/.UserPage} 02-16 12:28:36.947: INFO/Process(1039): Sending signal. PID: 1039 SIG: 9 02-16 12:28:37.017: INFO/ActivityManager(67): Process com.example.userpage (pid 1039) has died. 02-16 12:28:37.128: WARN/InputManagerService(67): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@43e872f8 02-16 12:28:42.087: DEBUG/dalvikvm(176): GC_EXPLICIT freed 156 objects / 11488 bytes in 145ms 02-16 12:28:45.391: WARN/ActivityManager(67): Activity destroy timeout for HistoryRecord{43ee7b70 com.example.userpage/.UserPage} 02-16 12:28:47.177: DEBUG/SntpClient(67): request time failed: java.net.SocketException: Address family not supported by protocol

  Read the article

• Developer Dashboard in SharePoint 2010

  - by jcortez

  Introducing the Developer Dashboard As a SharePoint developer (or IT Professional), how many times have you had the pleasure of figuring out why a particular page on your site is taking too long to render? I'm sure one of the techniques you have employed in troubleshooting is the process of elimination - removing individual web parts from the page hoping to identify which web part is misbehaving. One of the new features of SharePoint 2010 is the Developer Dashboard. This dashboard provides tracing and performance information that can be useful when you are trying to troubleshoot pages that are loading too slow. The Developer Dashboard is turned off by default and I'll go over 3 different ways to display it. Here is a screenshot of what the Developer Dashboard looks like when displayed at the bottom of the page:   You can see on the left side the different events that fired during the page processing pipeline and how long these events took. This is where you will see individual web parts being processed and how long it took to complete (obviously the kind of processing depends on what the web part does). On the right side you would see the different database calls issued through the SharePoint Object Model to process the page. You will notice that each of these database queries are actually a hyperlink and clicking on it displays a pop-up window that shows the actual SQL Query Text, the Call Stack that triggered the database call, and the IO statistics of that query. Enabling the Developer Dashboard Option 1: Managed Code   The Developer Dashboard is a farm-wide setting and the code above won't work if it is used within a web part hosted on any non-Central Admin site. The SPDeveloperDashboardLevel enum has three possible values: On, Off, and OnDemand. Setting it to On will always display the Developer Dashboard at the bottom of the page. Setting it Off will hide the Developer Dashboard. Setting it to OnDemand will add an icon at the top right corner of the page (see screenshot below) where a Site Collection Admin can toggle the display of the Developer Dashboard for a particular site collection. In my opinion, OnDemand is the best setting when troubleshooting a page or during development since a Site Collection Admin can turn it on or off and for a particular site only. The first cool thing about this is that the Site Collection Admin that turned it on will be the only one to see the Developer Dashboard output. Everyday users won't see the Developer Dashboard output even if it was turned on by a Site Collection Admin. If you need more flexibility on who gets to see the Developer Dashboard output, you can set the SPDeveloperDashboardSettings.RequiredPermissions to control which group of users will have the permission to see the output. Option 2: Using stsadm Using stsadm, you can run the following command to configure the Developer Dashboard: STSADM –o setproperty –pn developer-dashboard –pv OnDemand To successfully execute this command, be sure you that are running as a Farm Admin. Option 3: Using PowerShell For all scripts in SharePoint 2010, I prefer writing them as PowerShell scripts. Though the stsadm command is less verbose, the PowerShell equivalent is pretty straightforward and uses the SharePoint Object Model: You can of course parameterized the value that gets assigned to the DisplayLevel property so you can turn it On, Off or OnDemand depending on the parameter. Events and the Developer Dashboard  Now, don't assume that all the code inside your web part or page will show up in the Developer Dashboard complete with all the great troubleshooting information. Only a finite set of events are monitored by default (for a web part it will events in the base web part class). Let's say you have a click event that could take some time, for example a web service call. And you want to include troubleshooting information for this event in the Developer Dashboard. Enter SPMonitoredScope which is also a new feature in SharePoint 2010. In SharePoint 2010, everything is executed within a "Monitored Scope". And each scope has a set of "Monitors" that measures and counts calls and timings which appears in the Developer Dashboard. Below is an example on how to get your custom code to get included in the Developer Dashboard by wrapping it inside a new monitored scope: The code above would include your new scope "My long web service call" into the Developer Dashboard and would log the time it took to complete processing. In my opinion, wrapping your custom code in a SPMonitoredScope is a SharePoint development best practice since it provides you visibility and a better understanding on the performance of your components.

  Read the article

• How to Play FLAC Files in Windows 7 Media Center & Player

  - by Mysticgeek

  An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen.   Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library.   Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information.   After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library.   Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12.   Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info.   Then confirming the album information is correct…   Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8  M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

  Read the article

• Cannot Install/Start MySQL Server

  - by Peezy Bro

  Okay, I decided to migrate from MySQL Server 5.5.37 to Percona Server 5.6. I ended up removing MySQL Server by the following: sudo apt-get --purge remove mysql-server mysql-server-5.5 mysql-server-core-5.5 mysql-client mysql-client-core-5.5 mysql-common sudo apt-get autoremove sudo apt-get autoclean rm -rf /var/lib/mysql rm -rf /etc/mysql Now here is my problem, when I try to install MySQL Server 5.6 it goes through its process and when it asks me for a password, it comes up with Cannot set MySQL "root" password. After it "installs" MySQL wont start up and I get permission denied?. Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded. brandon@brandon-DB:~$ sudo apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Suggested packages: libmldbm-perl libnet-daemon-perl libplrpc-perl libsql-statement-perl tinyca mailx The following NEW packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 upgraded, 10 newly installed, 0 to remove and 35 not upgraded. Need to get 0 B/8,955 kB of archives. After this operation, 96.3 MB of additional disk space will be used. Do you want to continue? [Y/n] y Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 167760 files and directories currently installed.) Preparing to unpack .../mysql-common_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libmysqlclient18:amd64. Preparing to unpack .../libmysqlclient18_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libdbi-perl. Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... Unpacking libdbi-perl (1.630-1) ... Selecting previously unselected package libdbd-mysql-perl. Preparing to unpack .../libdbd-mysql-perl_4.025-1_amd64.deb ... Unpacking libdbd-mysql-perl (4.025-1) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... Unpacking libterm-readkey-perl (2.31-1) ... Selecting previously unselected package mysql-client-core-5.5. Preparing to unpack .../mysql-client-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-client-5.5. Preparing to unpack .../mysql-client-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-core-5.5. Preparing to unpack .../mysql-server-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 168116 files and directories currently installed.) Preparing to unpack .../mysql-server-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server. Preparing to unpack .../mysql-server_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-server (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for ureadahead (0.100.0-16) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Setting up libdbi-perl (1.630-1) ... Setting up libdbd-mysql-perl (4.025-1) ... Setting up libterm-readkey-perl (2.31-1) ... Setting up mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing package mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing package mysql-server (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.19-0ubuntu6) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for ureadahead (0.100.0-16) ... Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I have all my database/tables dumped and on a seperate HDD. This is also a Dev Machine and not my main Production Machine. I also backed up the MySQL_Config and MySQL_Data.

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>”. This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks”. By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". Carl Dacosta ASP.NET QA Team

  Read the article

• Non-Dom Element Event Binding with jQuery

  - by Rick Strahl

  Yesterday I had a short discussion with Dave Reed on Twitter regarding setting up fake ‘events’ on objects that are hookable. jQuery makes it real easy to bind events on DOM elements and with a little bit of extra work (that I didn’t know about) you can also set up binding to non-DOM element ‘event’ bindings. Assume for a second that you have a simple JavaScript object like this: var item = { sku: "wwhelp" , foo: function() { alert('orginal foo function'); } }; and you want to be notified when the foo function is called. You can use jQuery to bind the handler like this: $(item).bind("foo", function () { alert('foo Hook called'); } ); Binding alone won’t actually cause the handler to be triggered so when you call: item.foo(); you only get the ‘original’ message. In order to fire both the original handler and the bound event hook you have to use the .trigger() function: $(item).trigger("foo"); Now if you do the following complete sequence: var item = { sku: "wwhelp" , foo: function() { alert('orginal foo function'); } }; $(item).bind("foo", function () { alert('foo hook called'); } ); $(item).trigger("foo"); You’ll see the ‘hook’ message first followed by the ‘original’ message fired in succession. In other words, using this mechanism you can hook standard object functions and chain events to them in a way similar to the way you can do with DOM elements. The main difference is that the ‘event’ has to be explicitly triggered in order for this to happen rather than just calling the method directly. .trigger() relies on some internal logic that checks for event bindings on the object (attached via an expando property) which .trigger() searches for in its bound event list. Once the ‘event’ is found it’s called prior to execution of the original function. This is pretty useful as it allows you to create standard JavaScript objects that can act as event handlers and are effectively hookable without having to explicitly override event definitions with JavaScript function handlers. You get all the benefits of jQuery’s event methods including the ability to hook up multiple events to the same handler function and the ability to uniquely identify each specific event instance with post fix string names (ie. .bind("MyEvent.MyName") and .unbind("MyEvent.MyName") to bind MyEvent). Watch out for an .unbind() Bug Note that there appears to be a bug with .unbind() in jQuery that doesn’t reliably unbind an event and results in a elem.removeEventListener is not a function error. The following code demonstrates: var item = { sku: "wwhelp", foo: function () { alert('orginal foo function'); } }; $(item).bind("foo.first", function () { alert('foo hook called'); }); $(item).bind("foo.second", function () { alert('foo hook2 called'); }); $(item).trigger("foo"); setTimeout(function () { $(item).unbind("foo"); // $(item).unbind("foo.first"); // $(item).unbind("foo.second"); $(item).trigger("foo"); }, 3000); The setTimeout call delays the unbinding and is supposed to remove the event binding on the foo function. It fails both with the foo only value (both if assigned only as “foo” or “foo.first/second” as well as when removing both of the postfixed event handlers explicitly. Oddly the following that removes only one of the two handlers works: setTimeout(function () { //$(item).unbind("foo"); $(item).unbind("foo.first"); // $(item).unbind("foo.second"); $(item).trigger("foo"); }, 3000); this actually works which is weird as the code in unbind tries to unbind using a DOM method that doesn’t exist. <shrug> A partial workaround for unbinding all ‘foo’ events is the following: setTimeout(function () { $.event.special.foo = { teardown: function () { alert('teardown'); return true; } }; $(item).unbind("foo"); $(item).trigger("foo"); }, 3000); which is a bit cryptic to say the least but it seems to work more reliably. I can’t take credit for any of this – thanks to Dave Reed and Damien Edwards who pointed out some of these behaviors. I didn’t find any good descriptions of the process so thought it’d be good to write it down here. Hope some of you find this helpful.© Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• ComboBox Control using silverlight

  - by Aamir Hasan

  DropDown.zip (135.33 kb) LiveDemo Introduction In this article i am  going to explore some of the features of the ComboBox.ComboBox makes the collection visible and allows users to pick an item from the collection.After its first initialization, no matter if you bind a new datasource with fewer or more elements, the dropdown persists its original height.One workaround is the following:1. store the Properties from the original ComboBox2. delete the ComboBox removing it from its container3. create a new ComboBox and place it in the container4. recover the stores Properties5. bind the new DataSource to the newly created combobox Creating Silverlight ProjectCreate a new Silverlight 3 Project in VS 2008. Name it as ComboBoxtSample. Simple Data BindingAdd System.Windows.Control.Data reference to the Silverlight project. Silverlight UserControl Add a new page to display Bus data using DataGrid. Following shows Bus column XAML snippet:The ComboBox element represents a ComboBox control in XAML.  <ComboBox></ComboBox>ComboBox XAML        <StackPanel Orientation="Vertical">            <ComboBox Width="120" Height="30" x:Name="DaysDropDownList" DisplayMemberPath="Name">                <!--<ComboBox.ItemTemplate>                    <DataTemplate>                        <StackPanel Orientation="Horizontal">                            <TextBlock Text="{Binding Path=Name}" FontWeight="Bold"></TextBlock>                            <TextBlock Text=", "></TextBlock>                            <TextBlock Text="{Binding Path=ID}"></TextBlock>                        </StackPanel>                    </DataTemplate>                </ComboBox.ItemTemplate>-->            </ComboBox>        </StackPanel>   The following code below is an example implementation Combobox control support data binding     1 By setting the DisplayMemberPath property you can specify which data item in your data you want displayed in the ComboBox.    2 Setting the SelectedIndex allows you to specify which item in the ComboBox you want selected. Business Object public class Bus { public string Name { get; set; } public float Price { get; set; } }   Data Binding private List populatedlistBus() { listBus = new List(); listBus.Add(new Bus() {Name = "Bus 1", Price = 55f }); listBus.Add(new Bus() { Name = "Bus 2", Price = 55.7f }); listBus.Add(new Bus() { Name = "Bus 3", Price = 2f }); listBus.Add(new Bus() { Name = "Bus 4", Price = 6f }); listBus.Add(new Bus() { Name = "Bus 5", Price = 9F }); listBus.Add(new Bus() { Name = "Bus 6", Price = 10.1f }); return listBus; }   The following line of code sets the ItemsSource property of a ComboBox. DaysDropDownList.ItemsSource = populatedlistBus(); Output I hope you enjoyed this simple Silverlight example Conclusion In this article, we saw how data binding works in ComboBox.You learnt how to work with the ComboBox control in Silverlight.

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>” This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks” /> By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH".

  Read the article

• Workaround for datadude deployment bug - NullReferenceException

  - by jamiet

  I have come across a bug in Visual Studio 2010 Database Projects (aka datadude aka DPro aka Visual Studio Database Development Tools aka Visual Studio Team Edition for Database Professionals aka Juneau aka SQL Server Data Tools) that other people may encounter so, for the purposes of googling, I'm writing this blog post about it. Through my own googling I discovered that a Connect bug had already been raised about it (VS2010 Database project deploy - “SqlDeployTask” task failed unexpectedly, NullReferenceException), and coincidentally enough it was raised by my former colleague Tom Hunter (whom I have mentioned here before as the superhuman Tom Hunter) although it has not (at this time) received a reply from Microsoft. Tom provided a repro, namely that this syntactically valid function definition: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN (    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte) would produce this nasty unhelpful error upon deployment: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\TeamData\Microsoft.Data.Schema.TSqlTasks.targets(120,5): Error MSB4018: The "SqlDeployTask" task failed unexpectedly.System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.VariableSubstitution(SqlScriptProperty propertyValue, IDictionary`2 variables, Boolean& isChanged)   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.ArePropertiesEqual(IModelElement source, IModelElement target, ModelPropertyClass propertyClass, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareProperties(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareAllElementsForOneType(ModelElementClass type, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean compareOrphanedElements)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareStore(ModelStore source, ModelStore target, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.Build.SchemaDeployment.CompareModels()   at Microsoft.Data.Schema.Build.SchemaDeployment.PrepareBuildPlan()   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute(Boolean executeDeployment)   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute()   at Microsoft.Data.Schema.Tasks.DBDeployTask.Execute()   at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()   at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult)   Done executing task "SqlDeployTask" -- FAILED.  Done building target "DspDeploy" in project "Lloyds.UKTax.DB.UKtax.dbproj" -- FAILED. Done executing task "CallTarget" -- FAILED.Done building target "DBDeploy" in project It turns out there are a certain set of circumstances that need to be met for this error to occur: The object being deployed is an inline function  (may also exist for multistatement and scalar functions - I haven't tested that) That object includes SQLCMD variable references The object has already been deployed successfully Just to reiterate that last bullet point, the error does not occur when you deploy the function for the first time, only on the subsequent deployment.   Luckily I have a direct line into a guy on the development team so I fired off an email on Friday evening and today (Monday) I received a reply back telling me that there is a simple fix, one simply has to remove the parentheses that wrap the SQL statement. So, in the case of Tom's repro, the function definition simpy has to be changed to: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN --(    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte--) I have commented out the offending parentheses rather than removing them just to emphasize the point. Thereafter the function will deploy fine. I tested this out on my own project this morning and can confirm that this fix does indeed work.   I have been told that the bug CAN be reproduced in the Release Candidate (RC) 0 build of SQL Server Data Tools in SQL Server 2010 so am hoping that a fix makes it in for the Release-To-Manufacturing (RTM) build. Hope this helps @jamiet

  Read the article

• Using the “Settings.settings” functionalities in VB.NET can be tricky…

  - by Vincent Grondin

  Sometime you’re searching for something forever and when you find it, you realize it was right under your nose.  Maybe you were distracted by other things around… or maybe that thing right under your nose was so well hidden that it deserves a blog post…   That happened to me a few days ago while using the “Settings.settings” functionalities in my VB.NET application…  I thought it was a cool feature and I decided to use it…  So there I am adding new settings with “USER” scope and StringCollection as the data type, testing my application and everything works perfectly fine...  That was before I decided to modify the “Value” of one of my settings…  After changing the value of one of my settings, I start my application again and, to my surprise, my new values aren’t showing!  Hmmm… That’s odd…  My setting was a pretty long list of strings so I was rather angry at myself for not saving my work after I was done…  So I open up the Settings.setting in the designer and click the ellipsis symbol to enter my string collection again, but to my great pleasure (and disbelief) my strings are there!!!  Alright, you rock VB.NET!  You’ve just save me a bunch of typing time and I’m thinking it’s just a simple Visual Studio glitch…  I hit “Save” then “Save All” (just in case) and finally I rebuild everything and fire up my app once again.  Huh?  Where are my darn strings????????  Ok there’s a bug there…  I open up the app.config and my new strings are there!!!  Alright, let’s recap…  My new strings are in the app.config, they show correctly in the Settings.settings designer UI but they aren’t showing at runtime…  Hmmmm?  Let’s try something else…  Let’s start the application but outside Visual Studio this time… I fire up the exe and BAM!  My strings where there!  I “alt-tab” and hit “F5” and BOOM, no strings!  So it’s a bug in the Visual Studio environment… or could it be a FEATURE?  I must admit that I’m a little confused over what’s a bug and what’s a feature in Visual Studio… lol!   Finally I found out there’s a “cache” for your Visual Studio located here:  C:\Users\<your username>\AppData\Local\Microsoft\<your app name and a very weird temp ID>\<your app version>\user.config When using the “Settings.settings” with a setting of scope “user”, this file is out of sync with your app.config until you manually decide to update it… The button is right there… under your nose… at the top left corner of your screen in the settings designer…  See the big “Synchronize” button there?  Yep…  Now that’s user friendly isn’t it?  Oh, and wait until you see what it does when you click it…  It prompts you and basically says:  “Would you like your settings to start working inside Visual Studio now that you found out that I exist?” and of course the right answer is yes… or rather “OK”…  Unfortunately, you have to do this every time you edit a value… On the other hand, adding and removing settings seem to work flawlessly without having to click this magical button… go figure!  Oh and I almost forgot… this great “feature” is only available for VB.NET…  A project in C# using Settings.settings will work perfectly EVEN when editing values… Here’s a screenshot that shows this important button: Button Using other data types appears to work perfectly well…   Maybe it’s simply related to the StringCollection data type?  If you are a VB.NET programmer, you should pay attention to this when you plan on using the settings functionalities and your scope is “user” and your data type is StringCollection… Happy coding all!

  Read the article

• Clean Up the New Ubuntu Grub2 Boot Menu

  - by Trevor Bekolay

  Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• Edit Media Center TV Recordings with Windows Live Movie Maker

  - by DigitalGeekery

  Have you ever wanted to take a TV program you’ve recorded in Media Center and remove the commercials or save clips of favorite scenes? Today we’ll take a look at editing WTV and DVR-MS files with Windows Live Movie Maker. Download and Install Windows Live Movie Maker. The download link can be found at the end of the article. WLMM is part of Windows Live Essentials, but you can choose to install only the applications you want. You’ll also want to be sure to uncheck any unwanted settings like settings Bing as default search provider or MSN as your browser home page.   Add your recorded TV file to WLMM by clicking the Add videos and photos button, or by dragging and dropping it onto the storyboard.   You’ll see your video displayed in the Preview window on the left and on the storyboard. Adjust the Zoom Time Scale slider at the lower right to change the level of detail displayed on the storyboard. You may want to start zoomed out and zoom in for more detailed edits.   Removing Commercials or Unwanted Sections Note: Changes and edits made in Windows Live Movie Maker do not change or effect the original video file. To accomplish this, we will makes cuts, or “splits,” and the beginning and end of the section we want to remove, and then we will delete that section from our project. Click and drag the slider bar along the the storyboard to scroll through the video. When you get to the end of a row in on the storyboard, drag the slider down to the beginning of the next row. We’ve found it easiest and most accurate to get close to the end of the commercial break and then use the Play button and the Previous Frame and Next Frame buttons underneath the Preview window to fine tune your cut point. When you find the right place to make your first cut, click the split button on the Edit tab on the ribbon. You will see your video “split” into two sections. Now, repeat the process of scrolling through the storyboard to find the end of the section you wish to cut. When you are at the proper point, click the Split button again.   Now we’ll delete that section by selecting it and pressing the Delete key, selecting remove on the Home tab, or by right clicking on the section and selecting Remove.   Trim Tool This tool allows you to select a portion of the video to keep while trimming away the rest.   Click and drag the sliders in the preview windows to select the area you want to keep. The area outside the sliders will be trimmed away. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon.   Delete any additional clips you don’t want in the final output. You can also accomplish this by using the Set start point and Set end point buttons. Clicking Set start point will eliminate everything before the start point. Set end point will eliminate everything after the end point. And you’re left with only the clip you want to keep.   Output your Video Select the icon at the top left, then select Save movie. All of these settings will output your movie as a WMV file, but file size and quality will vary by setting. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and prompts you to create and burn a DVD.   Conclusion WLMM is one of the few applications that can edit WTV files, and it’s the only one we’re aware of that’s free. We should note only WTV and DVR-MS files will appear in the Recorded TV library in Media Center, so if you want to view your WMV output file in WMC you’ll need to add it to the Video or Movie library. Would you like to learn more about Windows Live Movie Maker? Check out are article on how to turn photos and home videos into movies with Windows Live Movie Maker. Need to add videos from a network location? WLMM doesn’t allow this by default, but you check out how to add network support to Windows Live Move Maker. Download Windows Live Similar Articles Productive Geek Tips Rotate a Video 90 degrees with VLC or Windows Live Movie MakerHow to Make/Edit a movie with Windows Movie Maker in Windows VistaFamily Fun: Share Photos with Photo Gallery and Windows Live SpacesAutomatically Mount and View ISO files in Windows 7 Media CenterAutomatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• SQL Authority News – Play by Play with Pinal Dave – A Birthday Gift

  - by Pinal Dave

  Today is my birthday. Personal Note When I was young, I was always looking forward to my birthday as on this day, I used to get gifts from everybody. Now when I am getting old on each of my birthday, I have almost same feeling but the direction is different. Now on each of my birthday, I feel like giving gifts to everybody. I have received lots of support, love and respect from everybody; and now I must return it back.Well, on this birthday, I have very unique gifts for everybody – my latest course on SQL Server. How I Tune Performance I often get questions where I am asked how do I work on a normal day. I am often asked that how do I work when I have performance tuning project is assigned to me. Lots of people have expressed their desire that they want me to explain and demonstrate my own method of solving performance problem when I am facing real world problem. It is a pretty difficult task as in the real world, nothing goes as planned and usually planned demonstrations have no place there. The real world, demands real solutions and in a timely fashion. If a consultant goes to industry and does not demonstrate his/her capabilities in very first few minutes, it does not matter how much fame he/she is, the door is shown to them eventually. It is true and in my early career, I have faced it quite commonly. I have learned the trick to be honest from the start and request absolutely transparent communication from the organization where I am to consult. Play by Play Play by Play is a very unique setup. It is not planned and it is a step by step course. It is like a reality show – a very real encounter to the problem and real problem solving approach. I had a great time doing this course. Geoffrey Grosenbach (VP of Pluralsight) sits down with me to see what a SQL Server Admin does in the real world. This Play-by-Play focuses on SQL Server performance tuning and I go over optimizing queries and fine-tuning the server. The table of content of this course is very simple. Introduction In the introduction I explained my basic strategies when I am approached by a customer for performance tuning. Basic Information Gathering In this module I explain how I do gather various information for performance tuning project. It is very crucial to demonstrate to customers for consultant his capability of solving problem. I attempt to resolve a small problem which gives a big positive impact on performance, consultant have to gather proper information from the start. I demonstrate in this module, how one can collect all the important performance tuning metrics. Removing Performance Bottleneck In this module, I build upon the previous module’s statistics collected. I analysis various performance tuning measures and immediately start implementing various tweaks on the performance, which will start improving the performance of my server. This is a very effective method and it gives immediate return of efforts. Index Optimization Indexes are considered as a silver bullet for performance tuning. However, it is not true always there are plenty of examples where indexes even performs worst after implemented. The key is to understand a few of the basic properties of the index and implement the right things at the right time. In this module, I describe in detail how to do index optimizations and what are right and wrong with Index. If you are a DBA or developer, and if your application is running slow – this is must attend module for you. I have some really interesting stories to tell as well. Optimize Query with Rewrite Every problem has more than one solution, in this module we will see another very famous, but hard to master skills for performance tuning – Query Rewrite. There are few do’s and don’ts for any query rewrites. I take a very simple example and demonstrate how query rewrite can improve the performance of the query at many folds. I also share some real world funny stories in this module. This course is hosted at Pluralsight. You will need a valid login for Pluralsight to watch  Play by Play: Pinal Dave course. You can also sign up for FREE Trial of Pluralsight to watch this course. As today is my birthday – I will give 10 people (randomly) who will express their desire to learn this course, a free code. Please leave your comment and I will send you free code to watch this course for free. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority News, T SQL, Video

  Read the article

• Connection Pooling is Busted

  - by MightyZot

  A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

  Read the article

• SQL SERVER – Identifying guest User using Policy Based Management

  - by pinaldave

  If you are following my recent blog posts, you may have noticed that I’ve been writing a lot about Guest User in SQL Server. Here are all the blog posts which I have written on this subject: SQL SERVER – Disable Guest Account – Serious Security Issue SQL SERVER – Force Removing User from Database – Fix: Error: Could not drop login ‘test’ as the user is currently logged in SQL SERVER – Detecting guest User Permissions – guest User Access Status SQL SERVER – guest User and MSDB Database – Enable guest User on MSDB Database One of the requests I received was whether we could create a policy that would prevent users unable guest user in user databases. Well, here is a quick tutorial to answer this. Let us see how quickly we can do it. Requirements Check if the guest user is disabled in all the user-created databases. Exclude master, tempdb and msdb database for guest user validation. We will create the following conditions based on the above two requirements: If the name of the user is ‘guest’ If the user has connect (@hasDBAccess) permission in the database Check in All user databases, except: master, tempDB and msdb Once we create two conditions, we will create a policy which will validate the conditions. Condition 1: Is the User Guest? Expand the Database >> Management >> Policy Management >> Conditions Right click on the Conditions, and click on “New Condition…”. First we will create a condition where we will validate if the user name is ‘guest’, and if it’s so, then we will further validate if it has DB access. Check the image for the necessary configuration for condition: Facet: User Expression: @Name = ‘guest’ Condition 2: Does the User have DBAccess? Expand the Database >> Management >> Policy Management >> Conditions Right click on Conditions and click on “New Condition…”. Now we will validate if the user has DB access. Check the image for necessary configuration for condition: Facet: User Expression: @hasDBAccess = False Condition 3: Exclude Databases Expand the Database >> Management >> Policy Management >> Conditions Write click on Conditions and click on “New Condition…” Now we will create condition where we will validate if database name is master, tempdb or msdb and if database name is any of them, we will not validate our first one condition with them. Check the image for necessary configuration for condition: Facet: Database Expression: @Name != ‘msdb’ AND @Name != ‘tempdb’ AND @Name != ‘master’ The next step will be creating a policy which will enforce these conditions. Creating a Policy Right click on Policies and click “New Policy…” Here, we justify what condition we want to validate against what the target is. Condition: Has User DBAccess Target Database: Every Database except (master, tempdb and MSDB) Target User: Every User in Target Database with name ‘guest’ Now we have options for two evaluation modes: 1) On Demand and 2) On Schedule We will select On Demand in this example; however, you can change the mode to On Schedule through the drop down menu, and select the interval of the evaluation of the policy. Evaluate the Policies We have selected OnDemand as our policy evaluation mode. We will now evaluate by means of executing Evaluate policy. Click on Evaluate and it will give the following result: The result demonstrates that one of the databases has a policy violation. Username guest is enabled in AdventureWorks database. You can disable the guest user by running the following code in AdventureWorks database. USE AdventureWorks; REVOKE CONNECT FROM guest; Once you run above query, you can already evaluate the policy again. Notice that the policy violation is fixed now. You can change the method of the evaluation policy to On Schedule and validate policy on interval. You can check the history of the policy and detect the violation. Quiz I have created three conditions to check if the guest user has database access or not. Now I want to ask you: Is it possible to do the same with 2 conditions? If yes, HOW? If no, WHY NOT? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Best Practices, CodeProject, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: Policy Management

  Read the article

• Task-It Webinar - Source Code

  Last week I presented a webinar called "Building a real-world application with RadControls for Silverlight 4". For those that didn't get to see the webinar, you can view it here: Building a read-world application with RadControls for Silverlight 4 Since the webinar I've received several requests asking if I could post the source code for the simple application I showed demonstrating some of the techniques used in the development of Task-It, such as MVVM, Commands and Internationalization. This source code is now available for downloadhere. After downloading the source: Extract it to the location of your choice on your hard-drive Open the solution Right-click ModuleProject.Web and selecte 'Set as StartUp Project'. Right-click ProjectTestPage.aspx and selected 'Set as Start Page' Create a database in SQL Server called WebinarProject. Navigate to the Database folder under the WebinarProject directory and run the .sql script against your WebinarProject database. The last two steps are necessary only for the Tasks page to work properly (using WCF RIA Services). Now some notes about each page: Code-behind This is not the way I recommend coding a line-of-business application in Silverlight, but simply wanted to show how the code-behind approach would look. Command This page introduces MVVM and Commands. You'll notice in the XAML that the Command property of theRadMenuItem and the Button are both bound to a SaveCommand. That comes from the view model. If you look in the code- behind of the user control you'll see that an instance of a CommandViewModel is instantiated and set as the DataContext of the UserControl.There is also a listener for the view model's SaveCompleted event. When this is fired, it tells the view (UserControl) to display the MessageBox. Internationalization This sample is similar to the previous one, but instead of using hard-coded strings in the UI, the strings are obtained via binding toview model properties. The view model gets the strings from the .resx files (Strings.resx or Strings.de.resx) under Assets/Resources. If you uncomment the call to ShowGerman() in App.xaml.cs's Application_Startup method and re-run the application, you will see the UI in German. Note that this code, which sets the CurrentCulture and CurrentUICulture on the current thread to "de" (German) is for testing purposes only. RadWindow Once again, very similar to the previous example.The difference is that we are now using a RadWindow to display the 'Saved' message instead of a MessageBox. The advantage here is that we do not have to hold on to a reference to the view model in our code behind so that we can get the 'Saved' message from it. The RadWindow's DataContext is now also bound to the view model, so within its XAML we can bind directly to properties in the view model. Much nicer, and cleaner. One other thing I introduced in this example is the use of spacer Rectangles. Rather than setting a width and/or height on the rectangles for spacing, I am now referencing a style in my ResourceDictionary called StandardSpacerStyle. I like doing this better than using margins or padding because now I have a reusable way to create space between elements, the Rectangle does not show (because I have not set its Fill color), and I can change my spacing throughout the user interface in one place if I'd like. Tasks This page is quite a bit different than the other four. It is a very simple, stripped-down version of the Tasks page in the Task-It application. The Tasks.xaml UserControl has a ContentControl, and the Content of that control is set based on whether we are looking at the list of tasks or editing a task. So it displays one of two child UserControls, which are called List and Details. List has the RadGridView, Details has the form. In the code-behind of the Tasks UserControl I am once again setting its DataContext to a view model class. The nice thing is, whichever child UserControl is being displayed (List or Details) inherits its DataContext from its parent control (Tasks), so I do not have to explicitly set it. The List UserControl simply displays a RadGridView whose ItemsSource is bound to a property in the view model called Tasks, and its SelectedItem property is bound to a property in the view model called SelectedItem. The SelectedItem binding must be TwoWay so that the view is notified when the SelectedItem changes in the view model, and the view model is notified when something changes in the view (like when a user changes the Name and/or DueDate in the form). You'll also notice that the form's TextBox and RadDatePicker are also TwoWay bound to the SelectedItem property in the view model. You can experiment with the binding by removing TwoWay and see how changes in the form do not show up in the RadGridView. So here we have an example of two different views (List and Details) that are both bound to the same view model...and actually, so is the Tasks UserControl, so it is really three views. WCF RIA Services By the way, I am using WCF RIA Services to retrieve data for the RadGridView and save the data when the user clicks the Save button in the form. I created a really simple ADO.NET Entity Data Model in WebinarProject.Web called DataModel.edmx. I also created a simple Domain Data Service called DataService that has methods for retrieving data, inserting, updating and deleting. However I am only using the retrieval and update methods in this sample. Note that I do not currently have any validation in place on the form, as I wanted to keep the sample as simple as possible. Wrap up Technically, I should move the calls to WCF RIA Services out of the view model and put them into a separate layer, but this works for now, and that is a topic for another day! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• Installing Catalyst 11.6 for an ATI HD 6970

  - by David Oliver

  Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

  Read the article

• MVVM Light V4 preview 2 (BL0015) #mvvmlight

  - by Laurent Bugnion

  Over the past few weeks, I have worked hard on a few new features for MVVM Light V4. Here is a second early preview (consider this pre-alpha if you wish). The features are unit-tested, but I am now looking for feedback and there might be bugs! Bug correction: Messenger.CleanupList is now thread safe This was an annoying bug that is now corrected: In some circumstances, an exception could be thrown when the Messenger’s recipients list was cleaned up (i.e. the “dead” instances were removed). The method is called now and then and the exception was thrown apparently at random. In fact it was really a multi-threading issue, which is now corrected. Bug correction: AllowPartiallyTrustedCallers prevents EventToCommand to work This is a particularly annoying regression bug that was introduced in BL0014. In order to allow MVVM Light to work in XBAPs too, I added the AllowPartiallyTrustedCallers attribute to the assemblies. However, we just found out that this causes issues when using EventToCommand. In order to allow EventToCommand to continue working, I reverted to the previous state by removing the AllowPartiallyTrustedCallers attribute for now. I will work with my friends at Microsoft to try and find a solution. Stay tuned. Bug correction: XML documentation file is now generated in Release configuration The XML documentation file was not generated for the Release configuration. This was a simple flag in the project file that I had forgotten to set. This is corrected now. Applying EventToCommand to non-FrameworkElements This feature has been requested in order to be able to execute a command when a Storyboard is completed. I implemented this, but unfortunately found out that EventToCommand can only be added to Storyboards in Silverlight 3 and Silverlight 4, but not in WPF or in Windows Phone 7. This obviously limits the usefulness of this change, but I decided to publish it anyway, because it is pretty damn useful in Silverlight… Why not in WPF? In WPF, Storyboards added to a resource dictionary are frozen. This is a feature of WPF which allows to optimize certain objects for performance: By freezing them, it is a contract where we say “this object will not be modified anymore, so do your perf optimization on them without worrying too much”. Unfortunately, adding a Trigger (such as EventTrigger) to an object in resources does not work if this object is frozen… and unfortunately, there is no way to tell WPF not to freeze the Storyboard in the resources… so there is no way around that (at least none I can see. In Silverlight, objects are not frozen, so an EventTrigger can be added without problems. Why not in WP7? In Windows Phone 7, there is a totally different issue: Adding a Trigger can only be done to a FrameworkElement, which Storyboard is not. Here I think that we might see a change in a future version of the framework, so maybe this small trick will work in the future. Workaround? Since you cannot use the EventToCommand on a Storyboard in WPF and in WP7, the workaround is pretty obvious: Handle the Completed event in the code behind, and call the Command from there on the ViewModel. This object can be obtained by casting the DataContext to the ViewModel type. This means that the View needs to know about the ViewModel, but I never had issues with that anyway. New class: NotifyPropertyChanged Sometimes when you implement a model object (for example Customer), you would like to have it implement INotifyPropertyChanged, but without having all the frills of a ViewModelBase. A new class named NotifyPropertyChanged allows you to do that. This class is a simple implementation of INotifyPropertyChaned (with all the overloads of RaisePropertyChanged that were implemented in BL0014). In fact, ViewModelBase inherits NotifyPropertyChanged. ViewModelBase does not implement IDisposable anymore The IDisposable interface and the Dispose method had been marked obsolete in the ViewModelBase class already in V3. Now they have been removed. Note: By this, I do not mean that IDisposable is a bad interface, or that it shouldn’t be used on viewmodels. In the contrary, I know that this interface is very useful in certain circumstances. However, I think that having it by default on every instance of ViewModelBase was sending a wrong message. This interface has a strong meaning in .NET: After Dispose has been executed, the instance should not be used anymore, and should be ready for garbage collection. What I really wanted to have on ViewModelBase was rather a simple cleanup method, something that can be executed now and then during runtime. This is fulfilled by the ICleanup interface and its Cleanup method. If your ViewModels need IDisposable, you can still use it! You will just have to implement the interface on the class itself, because it is not available on ViewModelBase anymore. What’s next? I have a couple exciting new features implemented already but that need more testing before they go live… Just stay tuned and by MIX11 (12-14 April 2011), we should see at least a major addition to MVVM Light Toolkit, as well as another smaller feature which is pretty cool nonetheless More about this later! Happy Coding Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• MySQL server stopped working after upgrade

  - by umpirsky

  I upgraded to 12.04 and my MySQL server just stopped working. It throws: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I tried to reinstall it from software center, but it fails with: Package operation failed The installation or removal of a software package failed. installArchives() failed: Selecting previously unselected package mysql-server. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 243412 files and directories currently installed.) Unpacking mysql-server (from .../mysql-server_5.5.22-0ubuntu1_all.deb) ... Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: mysql-server-5.5 mysql-server Error in function: Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured I also tried: $ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: mysql-server-5.5 mysql-server-core-5.5 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mysql-server-5.5 E: Sub-process /usr/bin/dpkg returned an error code (1) Any idea? EDIT: Crash report is being auto generated. EDIT: After trying and trying I got suggestion to do: #apt-get --purge remove mysql-server-5.1 mysql-server-5.5 Reading package lists... Done Building dependency tree Reading state information... Done Virtual packages like 'mysql-server-5.1' can't be removed The following packages will be REMOVED: mysql-server-5.5* 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 31.3 MB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 243407 files and directories currently installed.) Removing mysql-server-5.5 ... Purging configuration files for mysql-server-5.5 ... Processing triggers for ureadahead ... Processing triggers for man-db ... The most important part is: Virtual packages like 'mysql-server-5.1' can't be removed Any idea?

  Read the article

• Dlink DWA-556 Access point fails to start on 2.6.35-25 while 2.6.35-24 works. How can I do this with >2.6.35-24?

  - by Azendale

  I'm using hostapd to run an access point with a Dlink DWA-556 wireless N card. However, I can no longer get it to start when I use kernels greater than 2.6.35-24. Here's a log where I ran the uname -a&&hostapd -c <configfile> on the different kernel versions. Linux erikbandersen 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr 1c:bd:b9:d5:e8:3c and ssid 'erikbandersen.com/freewifi' wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=436 left=256 plen=420 256 extra bytes in the end of netlink message MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb mgmt::auth authentication: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authentication OK (open system) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-AUTHENTICATE.indication(3c:4a:92:0e:41:2f, OPEN_SYSTEM) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) authentication reply: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authenticated mgmt::assoc_req association request: STA=3c:4a:92:0e:41:2f capab_info=0x421 listen_interval=10 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 HT: STA 3c:4a:92:0e:41:2f HT Capabilities Info: 0x102c handle_assoc STA 3c:4a:92:0e:41:2f - no greenfield, num of non-gf stations 1 handle_assoc STA 3c:4a:92:0e:41:2f - 20 MHz HT, num of 20MHz HT STAs 1 hostapd_ht_operation_update current operation mode=0x0 hostapd_ht_operation_update new operation mode=0x7 changes=2 new AID 1 wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: associated (aid 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-ASSOCIATE.indication(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f RADIUS: starting accounting session 4DAC8224-00000000 MGMT (TX callback) ACK mgmt::action cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb Signal 2 received - terminating wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DEAUTHENTICATE.indication(3c:4a:92:0e:41:2f, 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) Removing station 3c:4a:92:0e:41:2f hostapd_ht_operation_update current operation mode=0x7 hostapd_ht_operation_update new operation mode=0x0 changes=2 Flushing old station entries Deauthenticate all stations . Linux erikbandersen 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=27 dBm HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Could not set channel for kernel driver wlan1: Unable to setup interface. My wireless card is listed as 02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) by lspci. Am I doing it wrong and there's a new way of doing it? I'm holding off upgrading to Natty because of this. What changed between the versions that would cause this? Should I report it as a bug?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >