Search Results

Search found 91048 results on 3642 pages for 'dell user'.

Page 12/3642 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Windows-Server-2003 setup on Dell-PowerEdge R310 is hanging [closed]

  - by Robert Rose

  Possible Duplicate: Problems installing OS on Dell PowerEdge R410 I am trying to configure a Dell PowerEdge R310 server with Windows Server 2003. I've already configured the two hard drives as RAID1. The HD controller is PERC H700 Integrated and Adapter. Trying to stay with Windows Server 2003 on this fairly new server to save on cost and keep the configuration the same as my old server, which has been running like a champ for five years. Problem: During the OS installation, after everything has been copied from the installation CD, the installation hangs at a window labeled 'Windows Setup' with the message 'Setup is starting Windows' at the bottom. I'm wondering if this is a driver problem and if so, where can I get the drivers for the R310 or where can I get the media for the latest version of Windows Server 2003 which may include the necessary drivers? Will certainly appreciate some help here.

  Read the article

• Replacement Alternative for Dell FY606 in a Poweredge T105

  - by Mike C

  I have recently upgraded my Poweredge T105 server to use a SAS 6/ir RAID controller. Unfortunately, I did not realize at the time that adding the card would cause the BIOS to complain about a missing hard drive fan. This warning requires that a user press F1 to continue, which is disastrous in a server environment. I have searched all over found that the specific part I need is a Dell FY606 fan. However, I have yet to find a suitable retailer that covers this part. I have contacted Dell and they do not have this part in stock. Are there any alternative models of a fan that I could use in place of an FY606? Seems like a pretty straightforward part, just a fan that connects to a 4-pin power connector on the motherboard.

  Read the article

• Centos and dell PowerEdge Rxxx Series.

  - by OrenM

  hi we lately purchase few dell servers all of them from Rxxx series couple of R410 and R710 the OS we used on those servers is: CentOS 5.4 we're getting very weird error messages and we lost network connectivity couple of times (restarting the network interface was needed to fix it) the messages we're getting are: Message from syslogd@ at Wed Nov 18 12:07:08 2009 ... servername kernel: Uhhuh. NMI received for unknown reason 20. Message from syslogd@ at Wed Nov 18 12:07:08 2009 ... servername kernel: Do you have a strange power saving mode enabled? Message from syslogd@ at Wed Nov 18 12:07:08 2009 ... servername kernel: Dazed and confused, but trying to continue we have never seen those messages in the previous series of dell poweredge servers do someone here using centOS 5.4 on Rxxx series? did it happen to him too? maybe you have a suggestion about how to prevent it from happening

  Read the article

• Dell R910 with Integrated PERC H700 Adapter

  - by Alex

  I am in the process of designing an architecture based around a single Dell R910 server running Windows Server 2008 Enterprise. I would like the server to have 8 RAID1 pairs of spinning disks, so I intend to implement: Dell R910 Server Integrated PERC H700 Adapter with 1 SAS expander on each SAS connector (so 8 expanders in total) 7 RAID1 pairs of 143Gb 15K HDD, each paired on one connector using an expander 1 RAID1 pair of 600Gb 10K HDD, paired on the remaining connector using an expander My main concern is not to introduce bottlenecks in this architecture, and I have the following questions. Will the PERC H700 Adapter act as a bottleneck for disk access? Will using SAS expanders for each RAID1 pair cause a bottleneck or would this be as fast as pairing disks directly attached to the SAS connectors? Can I mix the disks, as long as the disks in each RAID1 pair are the same? I assume so. Can anyone recommend any single-to-double SAS Expanders that are known to function well with the H700? Cheers Alex

  Read the article

• Uninstall Dell Wave

  - by Onion-Knight

  The image we put on our company laptops includes the Dell Wave interface for Biometric log in. The Wave UI increases boot time by about 5 minutes (because it loads the fingerprint database(a feature I don't use)), so I'm trying to uninstall it, but with little success. There is no line-item in the Add/Remove Programs menu to formally delete it, nor is there a Service I can stop/remove to disable the Wave UI. I've tried looking online, but all I find instead are hits for Google Wave and virus-removal forums with HyjackThis dumps that include Dell Wave records. Any ideas?

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• Uninstall or Disable Dell Wave

  - by Onion-Knight

  The image we put on our company laptops includes the Dell Wave interface for Biometric log in. The Wave UI increases boot time by about 5 minutes (because it loads the fingerprint database(a feature I don't use)), so I'm trying to uninstall it, but with little success. There is no line-item in the Add/Remove Programs menu to formally delete it, nor is there a Service I can stop/remove to disable the Wave UI. I've tried looking online, but all I find instead are hits for Google Wave and virus-removal forums with HyjackThis dumps that include Dell Wave records. Any ideas? Edit: Removal isn't entirely necessary. Disabling the Wave UI is good enough.

  Read the article

• Dell Power Edge R515 - Replacing a Bad Hard Drive in a RAID

  - by LonnieBest

  I've ordered a new hard drive to replace a bad one in a Dell Power Edge R515. The manual covers obvious topics regarding physical replacing of hard drives, but I've never done this before on a production server where RAID is involved. I've heard people talk about this topic, and I've heard that some servers have RAID controllers that are smart enough to allow you to just put in the new drive (hot swap), and then the server will know automatically how to rebuild that drive to be what the old one was to the system. Where do I find the proper procedure for replacing a failed hard drive on a live production Dell Power Edge R515? Can someone with experience tell me how easy or hard this usually is?

  Read the article

• Make laptop boot to external monitor

  - by Ozzy

  Hi all. Heres my setup: Dell 1737 2x Dell U2311H The laptop lid is always closed and is wall mounted behind the monitors. Every time i boot the laptop, i have to open the lid a little until it goes to the win 7 logon screen. Once there, i close the lid and both monitors get detected and the laptop screen switches off. As the laptop is wall mounted how ever, its really tedious to keep opening and closing the lid. Is there any way i can make it default to the external monitors permanently? Any suggestions are welcome, even hardware mods. Im willing to rip apart the laptop to install a switch or something if needs be lol

  Read the article

• Dell 2155cdn Multifuntion Printer

  - by Wayne-Z

  Hey guys. So after a prolonged period, (overnight) i lose the ability to initiate a scan directly from the unit. I'll initiate a job and after awhile, it times out and beeps. However, when i go to the PC and initiate a scan from there, the scan job goes through just fine, and i can then initiate scans directly from the unit all day. Until a prolonged period (overnight). Then i have to do the process again. Ive made sure all powersave settings were off.. The PC doesnt go to sleep or a powersave state. Any insight into this will be appreciated. Pertinent Info: - Unit: Dell 2155cdn Multifunction - Connected via USB - PC: Dell Optiplex 755

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• How do I start Chrome using a specified "user profile"?

  - by Danny Tuppeny

  I use the new built-in "Users" feature of Chrome to switch between Home/Work accounts easily. However, Chrome remembers the "last" user profile you had selected when launching new windows. This is a problem if I close down my "Home" profile last, because when I then click the Email shortcut on my taskbar, because it goes to mail.mycompany.com using my Home profile, and I'm not logged in. I'd like to change the shortcut to the company webmail to pass a switch that tells Chrome to always start as the "Default" user, regardless of the last one used. Note: I have tried user-data-dir, and this seems to do something very different, completely isolated from the Users functionality built in to Chrome. It's possible I'm using it wrong, but please test this before assuming it does the same thing and posting an answer ;-)

  Read the article

• Why Does My Laptop Freeze Up When Docked?

  - by Michael Haren

  I have a Dell Latitude D520. First with Windows XP and now with Windows 7, it completely freezes/locks up if I dock it while it's awake. If I hibernate/sleep, dock, then wake/resume, everything's fine. I installed the Dell Notebook System Software for Vista (No Win7 version available) and updated the bios to the latest version but the problem persists. As long as I remember to put this thing in standby before I dock it, it's extremely reliable--it survives my daily commute and heavy use and typically only reboots a few times a month. Any other ideas for things I can try?

  Read the article

• How to PERMANENTLY disable touchpad tap-to-click on Dell Inspiron/Windows 7

  - by Graham

  Hi all - my first time here, so I hope you can help. I've seen a lot of stuff on various forums (including here) about disabling the annoying "tap" function on a laptop touchpad. I learned the hard way not to de-install the driver (as the software suggests), since you then loose the Synaptic tab in the mouse control settings, and with it all means to modify the touchpad settings ... indicentally, if this happens to you, reboot in safe mode and do a restore, and the synaptic tab comes back. Not ideal, I know, but it works. Anyway, I have the most up-to-date drivers, and I can go to the Synaptics tab and can disable the tap-to-click function no problem. However, next time the machine is booted, tap-to-click is back on. It can alsways be disabled, but it's pain having to reset it every time the mchine is powered up. Is there a way to permanently disable it, once and for all? Thanks in advance, Graham

  Read the article

• Synaptics Touchpad on Dell Inspiron Stops Responding Sometimes.

  - by DaveDev

  Sometimes for no reason that I can observe my Synaptics touchpad will stop responding to scroll the scroll function (I swipe my finger down the right side). I then have to reboot to get it back. Does anyone know how to fix this? Preferably without upgrading the driver - I upgraded the driver before and it turned out to be crap. I don't want to do that again. I have an Inspiron 9400 with Windows XP Media Centre Edition

  Read the article

• Dell XPS Problem

  - by Alex B.

  Hi, Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas?

  Read the article

• Dell Studio 1555 not starting up

  - by Abhishek

  This is a 3-year-old laptop. I never had a big problem with it until now. I updated Kubuntu the night before yesterday. And Firefox got updated to version 18 and a few other related packages got updated. Then I shut down the laptop and restarted it, but it failed to start. I could hear the fan and the hard disk and the optical disk drive initialize. And the power button also lighted up. But there was no video - no POST or BIOS menu. I even opened the laptop up to the point when only the motherboard was the only thing attached to the base cover. I took it to the technician this evening. He checked it casually, and said that it might be a motherboard problem and will cost quite a bit to fix. Though he was not sure and said that he will give me a call after confirming the problem. Has anyone else had the same problem? What was it and what was the fix?

  Read the article

• how do you eject cd using keyboard on dell inspiron 6000

  - by Naveen Garg

  The eject button on my cd / dvd drive is broken. I can still eject using windows explorer from the context menu. I need to reinstall windows. Is there a function key combination i can use from the boot up screen ?

  Read the article

• Dell Studio 17 with two headphone outs

  - by eych

  Got a Studio 17 with two headphone out jacks. It also has Soundblaster X-Fi Hi Def Audio Software enabled. Would it be possible to use one of the headphone outs as a monitor and the other as a master out with the Soundblaster sofware (for djing), or do you think the two jacks are just one output split into two?

  Read the article

• Dell Inspiron/Windows Vista sleep/hibernate issue

  - by sarge

  When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

  Read the article

• Default User Id at Login different from User Name in Terminal Shell

  - by Bill

  During the Ubuntu 12.04 LTS installation, I was prompted to enter a user name and password, so that a corresponding account could be created and set up for login. I replaced the one that was provided by default (i.e. '70319', which is the Windows 7 admin id) with a user name/id of my choosing. Now, when I turn on the computer, and choose to enter the Ubuntu operating system, the login id that is displayed is 70319 - that is, the one provided by Windows 7. However, when I open up a Unix/Terminal shell, the user id that is displayed at the prompt is the one I entered during installation. Otherwise, the installation of Ubuntu was a success! Is there some way of changing the user id that is displayed at the Login screen, so that it is consistent with the one I entered during installation? If it's any help, I installed Ubuntu using wubi on an ASUS Eee PC 1011PX running Windows 7, and ASUS Express Gate Cloud. Further details regarding the setup/installation can be found at the following link: Installing Ubuntu on an Eee PC 1011PX

  Read the article

• Dropped Dell XPS has hard-drive trouble

  - by Alex B.

  Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

  Read the article

• Dell XPS 1530 DVD-RW firmware problem

  - by josecortesp

  Hello everyone. I have this XPS laptop since a year and a half ago. About 2 months ago, with the waranty expired, i tried to run the optiarc slot load DVD-RW firmware update, and said everything was okay. Then I restarted it and the problem started: Now, every single time I turn on my computer, it get stuck at the BIOS POST until the drive sounds like "ready" and then the computer starts normally. And this happen EXACTLY the same when it's getting back from sleep. I'm pretty sure is not a software issue, because I tried with Vista Home Premiun 32 bits, Ubuntu (from 8.10+)32 & 64, and with W7 64. Already tried to run the firmware installer like a million time, in case it is a failing install with no luck. Also, google it to see if someone has the same problem, and again, no. The Drive performs pretty okay once the System is on, but waiting to the drive to be ready everytime is really annoying. The Firmware I updated was this, and the drive is: K937C Assembly, Dvd+/-rw, 8, SLOT, 1530 Sony Nec Optiarc Inc. I'll apreciate any help you can give me

  Read the article

• multi-clients web application,should I use custom user controls or a common user control

  - by ValidfroM

  Say my company is going to build a complicated asp.net web form education system. One of the module is web based registration. To make it flexiable, we decide to use user control(ascx) with rule-engine (work flow) regulating all business logic behide them. Thus in future,for different clients, we can simply config basic existing rules or adding new rules.(Rules stored in db or XML per client). Now the question is how to deal with the user controls (ascx)? My opinion is for different client build diffrent user control from scratch. other voice is like reuse existing user controls.

  Read the article

• Windows 7 Dell 1545 rotate screen and change wallpaper

  - by bizarrechaos

  I recently bought a second monitor and hooked it to my laptop. I like to put the monitor in portrait mode when coding and i can do this with igfx but i was wondering if there was a way to make a keyboard shortcut that will rotate my display 270 degrees and change my wallpaper to one that fits the 1050 X 1680 portrait resolution, and then have a key that rotates back to normal and resets my wallpaper? I have googled to no avail, I look forward to your answers. Thanks in advance, bizarrechaos

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >