Search Results

Search found 91048 results on 3642 pages for 'dell user'.

Page 15/3642 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • continuous hard disk access - slowing down my machine

    - by suresh
    I find from the hard disk access LED on the front of my machine that the hard disk is being accessed more often and probably because of that, my machine is quite slow. The machine becomes unresponsive even when the load as seen from w command is around 1 or so. My desktop is optiplex 360 dell machine running Ubuntu 10.04. My questions are: How to quantify hard disk access and how to see if it is more than "normal" ? If it is more than normal, what are my solutions ? thanks suresh

    Read the article

  • How to set up Dell OMSA tools on Debian 6 (Squeeze) (PE2950)

    - by javano
    I assume I have set up them up incorrectly or am missing a library or dependency. When I log into the OMSA web interface I can't see anything Also, omreport tells me nothing; root@box:~# omreport storage controller No controllers found I assume these two will use the same source of information so what ever is wrong will fix them both. I set up OMSA as per these instructions. Also I have compiled MegaCLI (as this is a PowerEdge 2950 with a Perc 6/i controller) and I have used that to update the RAID firmware, so that works, but the Dell tools aren't. What have I missed during set up? root@kvm1:~# cat /etc/issue Debian GNU/Linux 6.0 \n \l root@kvm1:~# uname -a Linux kvm1.mivoice.cust.vostron.net 3.4.9 #1 SMP Wed Aug 22 19:08:46 BST 2012 x86_64 GNU/Linux

    Read the article

  • Removing RAID on a DELL power-edge server

    - by Simon Callan
    We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

    Read the article

  • Dell poweredge 1850's - wont install os

    - by user1326789
    I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

    Read the article

  • Installing W2K8 R2 on a Dell Poweredge 2850

    - by DerekT
    I'm a server novice and have been given a Dell 2850 (PERC 4e/Di). It has 3 blank HDs that I think are configured as RAID 5. I am trying to install W2K8 R2 SP1 on it. It doesn't have a DVD reader so I created an install USB. This works fine until it's time to copy files to the HD. It can't see a HD. There is an option to browse for drivers at this stage. Any idea what drivers I need and where to download them? I downloaded this driver RAID_DRVR_WIN_R227150.EXE but this failed with invalid signature. Thanks to dyasny for the link to LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe.

    Read the article

  • Dell EqualLogic vs. EMC VNXe [closed]

    - by Untalented
    We've been looking into SMB SANs and based on the competitive pricing I've been getting we're really liking these two array's. There are some pro's to both solutions, but I've unable to really decide which to choose. The EMC offers better expandability since you can buy an additional shelf (roughly $1200) and can add drives then to the array. However, the Dell unit is still very nice. Can anyone comment on their experiences with the two and thoughts on this? Also, to get the VMware Storage API support you need VMware Enterprise. How much additional performance does this provide? It's roughly $15k more than the Essentials Plus bundle we're looking at (this is a small environment [3 Hosts 1 Array].

    Read the article

  • Remote RAID Control in ESXi on a Dell PowerEdge 2950 Using OpenManage

    - by yoyomommy
    I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

    Read the article

  • Enter / Return key stops working

    - by andygrunt
    I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to?

    Read the article

  • Configuring NVIDIA Quadro with Dell Precision M4600

    - by vsecades
    After a frustrating couple of weeks when I recently bought my Dell Precision laptop, I managed to fix an issue where Ubuntu (yes, was NOT using Windows, get serious) would not recognize the video card and would cause all sorts of problems all over the place. I ended up one Saturday morning nearly throwing this thing away, when I managed to find a post about NVIDIA Optimus technology... ( http://www.pcmag.com/article2/0,2817,2358963,00.asp ). Now I am a huge advocate of disruptive new stuff, as long as we keep the broader audience in mind. Anyhow, disabling this (which as the BIOS settings state only work on Windows 7 or later), effectively allow the NVIDIA based Ubuntu driver to kick in full force. No need for a trash can anymore thankfully. As I saw multiple posts all over the place about this, check your BIOS, disable and try the video again to see if this corrects your issues. Best of luck!

    Read the article

  • Enter / Return key stops working

    - by andygrunt
    I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to? UPDATE: Thanks to CarlF's suggestion, I tried exiting running programmes and found it seems to be a problem with PhraseExpress.

    Read the article

  • Dell Precision 670 no booting

    - by fristson
    Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

    Read the article

  • Samba Server Make Multiple User Permissions Profiles

    - by Scriptonaut
    I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

    Read the article

  • Discount Multilingual Day in the Life of User Experience

    - by ultan o'broin
    Super article by the WikiMedia Foundation engineering folks about Designing for the Multilingual Web using the Wikipedia Universal Language Selector user interface as an example. Great ideas about tools that are available, as well as covering the basics of wireframing (mockups), prototyping, and user testing. Lots of inspiration there for developers and builders of apps who want to ensure their user experience (UX) really delivers for a global audience. Check out the use of the Firefox-based Pencil, how to translate your mockups, and how to perform remote user testing using Google+ Hangouts. Paul Giner demonstrates how to translate mockups. A little clunky and homespun in parts (I would prefer if tools such as Pencil or Balsamiq MockUps, and so on, could roundtrip directly from SVG to XLIFF for example, and Pencil doesn't work yet with the latest versions for Firefox) and I am not sure how it can really scales to enterprise-level use. However, the UX methodology is basically sound, and reinforces the importance of designing and testing in more that one language. The most powerful message for me is that you do not need special resources, training or expensive tools to deliver great-looking usable apps if you're a developer. Definitely worth considering if you're building apps out there in the community.

    Read the article

  • JavaScript and the User Experience

    5 sites I commonly vist at home: Google.com Gmail.com Linkedin.com Capella.edu Codeplex.com All of the top 5 sites I visit at home use JavaScript and is applied in various ways for various reasons. Gmail and Google make use of Ajax to retrieve information without the user having to call another page. In addition, all 5 of the websites use JavaScript to enhance a user's experience. Examples of this can be found in content rotation on Capella's main site and the displaying and hiding of specific content sections from within our course room. Codeplex uses Ajax and JavaScript to show dynamic content on its homepage and allow users to page through the data. I think there use of JavaScript is well placed and enhances the viewing experience of the user because it reduces the amount of interaction a user has to perform for them to obtain information they are looking to see. I have used JavaScript in various ways. One of the most memorable ways was to enable an HTML table to be able to have its rows paged and sorted based on the values in each table row.  

    Read the article

  • iPad and User Assistance

    - by ultan o'broin
    What possibilities does the iPad over for user assistance in the enterprise space? We will research the possibilities but I can see a number of possibilities already for remote workers who need access to trouble-shooting information on-site, implementers who need reference information and diagrams, business analysts or technical users accessing reports and dashboards for metrics or issues, functional users who need org charts and other data visualizations, and so on. It could also open up more possibilities for collaborative problem solving. User assistance content can take advantage of the device's superb display, graphics capability, connectivity, and long battery life. The possibility of opening up more innovative user assistance solutions (such as comics) is an exciting one for everyone in the UX space. Aligned to this possibility we need to research how users would use the device as they work.

    Read the article

  • Google Chrome user agent, wrong language

    - by B. Roland
    Hello! After some months, my Chrome(now 10.0.648.127 beta; but I tried with the lastest stable too) displayed some popular sites in English, instead of my Chrome & system language, which is Hungarian... I saw my User-Agent, which shows in Chrome: Mozilla/5.0 (X11; U; Linux i686; en-US) AppleWebKit/534.16 (KHTML, like Gecko) Chrome/10.0.648.127 Safari/534.16 But in Firefox: Mozilla/5.0 (X11; U; Linux i686; hu-HU; rv:1.9.2.15) Gecko/20110303 Ubuntu/10.04 (lucid) Firefox/3.6.15, what is correct... My question is: How can I change my user-agent(maybe dynamically, by version)? I tried with google-chrome --user-agent "text", but it failed in the newest versions.

    Read the article

  • A specific user is unable to log in to vsftpd

    - by HackToHell
    I am setting up a new user let his name be ftpguy. He has access to only one directory /var/www/xxx. I have already chowned the directory so that he has write and read privileges. The user is also unable to login via ssh as I have disabled that by changing his shell to /sbin/nologin. Also, in vsftpd config, I have enabled the chroot_local_user. Now whenever I log in from ftp, i get an auth error. Connect socket #1008 to xxxxxxxx, port 21... 220 Welcome to blah FTP service. USER ftpguy 331 Please specify the password. PASS **** 530 Login incorrect. I changed the password to something different several times, using the passwd command, nothing happens, i still the above error. However I am able to log in with my ssh creditals to my ftp server without any problems.(I do not use a key).

    Read the article

  • $ON_USER returning root instead of $USER

    - by Nathanel Titane
    Hello everybody! With Natty coming out soon, I've been at work updating my deployment and self-config script to make my desktop on 11.04 run and look the way I want it to. One bummer is that dbus seems to have changed and does not permit, in the same manner Lucid and Maverick did, the authentication of the current user by terminal call using grep and cat. Ideally, to run the script, I would sudo -s and then launch it as # chmod +x install && ./install Instead of returning my user name.. it now returns root and applies changes to the root profile and aborts whenever paths do not correspond. Here is my script header: #!/bin/bash ON_USER=$(echo ~ | awk -F'/' '{ print $1 $2 $3 }' | sed 's/home//g') export $(grep -v "^#" ~/.dbus/session-bus/`cat /var/lib/dbus/machine-id`-0) if sudo -u $ON_USER test -z "$DBUS_SESSION_BUS_ADDRESS" ; then eval `sudo -u $ON_USER dbus-launch --sh-syntax --exit-with-session` fi RELEASE=$(lsb_release -cs) How could I make it return the actual user now that natty is coming? Thanks for the help

    Read the article

  • RAID 5 - DELL 2850 and others

    - by Kiara
    I have installed Ubuntu on a DELL 2850 and I have configured an array of 5 disks (SCSI 73GB 10K) in RAID5. I wanted to simulate a drive error so in the middle of something I just took one of the drives out and put it back again after a bit. Then the drive shows an orange light and seems to be rebuilding but actually is taking hours and hours with no results. So I went to the PERC utility (Ctrl+M) and the disk shows "REBLD". But it never gets to an online state. So I went to Objects - Physical drives - Rebuilding - View rebuild process. And in here I can see a bar moving from 0%... but if I reboot before finishing and get into the PERC Utility again, it seems to start again rebuilding from 0% - so it is not rebuilding automatically. My concern is: what would happen in a real situation? Do I have to just switch the server off and go to the Perc utility to start the rebuilding manually? I thought the whole point was to have this done automatically and without the need of stopping the server. Or does it perhaps rebuild automatically indeed but needs to have enough time without rebooting because otherwise the rebuilding process will start from scratch? It seems to take more than 3h for a 73gb disk! My second question is: can I mix then hard drives? So if I have a RAID of 5x73GB 10K can I use different size (146GB) or speeds (15K)? Apparently someone said it is OK in here Poweredge 2850: replace disk with larger in RAID?

    Read the article

  • Dell R320 RAID 10 with CacheCade

    - by Geekman
    I'm looking for a higher-performance build for our 1RU Dell R320 servers, in terms of IOPS. Right now I'm fairly settled on: 4 x 600 GB 3.5" 15K RPM SAS RAID 1+0 array This should give good performance, but if possible, I want to also add an SSD Cache into the mix, but I'm not sure if there's enough room? According to the tech-specs, there's only up to 4 total 3.5" drive bays available. Is there any way to fit at least a single SSD drive along-side the 4x3.5" drives? I was hoping there's a special spot to put the cache SSD drive (though from memory, I doubt there'd be room). Or am I right in thinking that the cache drives are simply drives plugged in "normally" just as any other drive, but are nominated as CacheCade drives in the PERC controller? Are there any options for having the 4x600GB RAID 10 array, and the SSD cache drive, too? Based on the tech-specs (with up to 8x2.5" drives), maybe I need to use 2.5" SAS drives, leaving another 4 bays spare, plenty of room for the SSD cache drive. Has anyone achieved this using 3.5" drives, somehow?

    Read the article

  • PC won't PXE boot to WDS/MDT with Dell Optiplex 755

    - by Moman10
    I am trying to set up a basic MDT solution. I have set one up in the past at a previous job and it worked flawlessly, however here I'm running into a problem and am having no luck getting around it. I've installed Windows Server 2012 and MDT 2013, along with adding on the WDS role. I haven't configured much outside of the defaults for WDS, basically just set PXE response to respond to all clients (and unchecked admin approval). This machine does not run a DHCP server. I looked on the DHCP scope of our DHCP server, it shows options 66/67 checked and the server name of the WDS server is in there as well. I didn't add this but I assume it was put on during the install process (I believe I had to manually make some adjustments at my old job for this). The PC I have is a Dell Optiplex 755. I have enabled the onbard NIC w/PXE boot option in BIOS and attempted to boot. I get a "TFTP...." error but nothing offering out a DHCP address like I'm used to. In my previous job it pretty much worked right out of the box. I've verified that PortFast is enabled on the port and I've tried a couple different PCs (but both are the same model, only model I have to work with). No matter what, I get the same error. The subnet the PC is in is a different subnet than where the WDS server is sitting, but there are IP helper statements on the switch and the PCs can get regular DHCP addresses just fine from the DHCP server, just doesn't seem to get offered out a PXE boot option. I don't know if the problem is a configuration with the server or the PC itself...but after a few days of Googling I'm running out of ideas. Does anyone have a good idea of something it may be?

    Read the article

  • VMWare Setup with 2 Servers and a DAS (DELL MD3220)

    - by Kumala
    I am planning to use a VMWare based setup consisting of two VMWare servers (2 CPU, 256GB Memory) and a DAS (DELL MD3220 with 24x900GB disks). The virtual machines will be half running MS SQL databases (Application, Sharepoint, BI) and the other half of the VM will be file services, IIS. To enhance the capacity of the storage, we'll be adding a MD1220 enclosure with another 24x900GB to the MD3220. Both DAS will have 2 controllers. Our current measured IOPS is 1000 IOPS average, 7000 IOPS peak (those happen maybe twice per hour). We are in the planning phase now and are looking at the proper setup of the disks. The intention is to setup up both DAS one of the DAS with RAID 10 only and the other DAS with RAID 5. That will allow us to put the applications on the DAS that supports the application performance needs best. Question is how best to partition the two DASs to get best possible IOPS/MBps, each DAS will have to have 2 hot spares? For the RAID 5 Setup: Generally speaking, would it be better to have one single disk group across all 22 disks (24 - 2 hot spares) with both controllers assigned to the one disk group or is it better to have 2 disk groups each 11 disks, assigned to one of the two controllers? Same question for the RAID 10 setup: The plan is: 2 disks for logs (Raid 1), 2 Hotspare and 20 disks for RAID 10. Option 1: 5 * 4 disks (RAID 10), with two groups assigned to 1 controller and 3 groups to the other controller Option 2: One large RAID 10 across all the disks and have both controllers assigned to the same group? I would assume that there is no right or wrong, but it all depends very much on the specific application behaviour, so I am looking for some general ideas what the pros and cons are of the different options. IF there are other meaningful options, feel free to propose them.

    Read the article

  • Driver corruption when deploying Dell Touchpad Drivers (with software) during imaging process

    - by BigHomie
    We're an sccm shop, and use it to deploy Windows. When deploying Dell laptops (multiple models), the touchpad drivers seem install properly, but the software doesn't. The resulting problem is that when the touchpad is pressed on occasion, the mouse pointer will 'jump' to certain points on the screen. A possible symptom of this problem/visible sign is if the touchpad icon isn't in the system tray. The software is in the control panel, but when opened part of the gui is pixelated, indicating botched install maybe? The manual resolution to this, is to go into device manager and uninstall the driver with the option to uninstall all driver software. After a restart, the driver and software is apparently reinstalled, and from there works as expected. Obviously this partially defeats the purpose of a zero touch deployment. If anyone knows why this is and/or a possible workaround, those answers would be valid as well. Barring that, I want to find a way to deploy the driver and touchpad software in an unattended way, so that it can be conditionally installing during the imaging process. To be honest I'm not sure how to troubleshoot this, I suppose I could try drvinst.exe to install the driver, but finding out why this fails initially would keep me from spinning my wheels.

    Read the article

  • Workshops, online content show how Oracle infuses simplicity, mobility, extensibility into user experience

    - by mvaughan
    By Kathy Miedema & Misha Vaughan, Oracle Applications User Experience Oracle has made a huge investment into the user experience of its many different software product families, and recent releases showcase big changes and features that aim to promote end user engagement and efficiency by streamlining navigation and simplifying the user interface. But making Oracle’s enterprise software great-looking and usable doesn’t stop when Oracle products go out the door. The Applications User Experience (UX) team recognizes that our customers may need to customize software to fit their work processes. And that’s why we provide tools such as user experience design patterns to help you maintain the Oracle user experience as you tailor your application to fit your business needs. Often, however, customers may need some context around user experience. How has the Oracle user experience been designed and constructed? Why is a good user experience important for users? How does understanding what goes into the user experience benefit the people who purchase the software for users? There’s a short answer to these questions, and you can read about it on Usable Apps. But truly understanding Oracle’s investment and seeing how it applies across product families occasionally requires a deeper dive into the Oracle user experience, especially if you’re an influencer or decision-maker about Oracle products. To help frame these decisions, the Communications & Outreach team has developed several targeted workshops that explore what Oracle means when it talks about user experience, and provides a roadmap into where the Oracle user experience is going. These workshops require non-disclosure agreements, and have been delivered to Oracle sales folks, Oracle partners, Oracle ACE Directors and ACEs, and a few customers. Some of these audience members have been developers or have a technical background; just as many did not. Here’s a breakdown of the kind of training you can get around the Oracle user experience from the OAUX Communications & Outreach team.For Partners: George Papazzian, Principal, Naviscent with Joyce Ohgi, Oracle Oracle Fusion Applications HCM Pre-Sales Seminar:  In concert with Worldwide Alliances  and  Channels under Applications Partner Enablement Director Jonathan Vinoskey’s guidance, the Applications User Experience team delivers a two-day workshop.  Day one focuses on Oracle Fusion Applications HCM and pre-sales strategy, and Day two focuses on positioning and leveraging Oracle’s investment in the Oracle Fusion Applications user experience.  The next workshops will occur on the following dates: December 4-5, 2013 @ Manchester, UK January 29-30, 2014 @ Reston, Virginia February 2014 @ Guadalajara, Mexico (email: Shannon Whiteman) March 11-12, 2014 @ Dubai, United Arab Emirates April 1-2, 2014 @ Chicago, Illinois Partner Advisory Board: A two-day board meeting in the U.S. and U.K. to discuss four main user experience areas for Oracle Fusion Applications: simplicity, visualization & analytics, mobility, & futures. This event is limited to Oracle Diamond Partners, UX bloggers, and key UX influencers and requires legal documentation.  We will be talking about the Oracle applications UX strategy and roadmap. Partner Implementation Training on User Interface: How to Build Great-Looking, Usable Apps:  In this two-day, hands-on workshop built around Oracle’s Application Development Framework, learn how to build desktop and mobile user interfaces and mobile user interfaces based on Oracle’s experience with Fusion Applications. This workshop is for partners with a technology background who are looking for ways to tailor Fusion Applications using ADF, or have built their own custom solutions using ADF. It includes an introduction to UX design patterns and provides tools to build usability-tested UX designs. Nov 5-6, 2013 @ Redwood Shores, CA, USA January 28-29th, 2014 @ Reston, Virginia, USA February 25-26, 2014 @ Guadalajara, Mexico March 9-10, 2014 @ Dubai, United Arab Emirates To register, contact [email protected] Simplified UI Customization & Extensibility:  Pilot workshop:  We will be reviewing the proposed content for communicating the user experience tool kit available with the next release of Oracle Fusion Applications.  Our core focus will be on what toolkit components our system implementors and independent software vendors will need to respond to customer demand, whether they are extending Fusion Applications, or building custom applications, that will need to leverage the simplified UI. Dec 11th, 2013 @ Reading, UK For information: contact [email protected] Private lab tour and demos: Interested in seeing what’s going on in the Apps UX Labs?  If you are headed to the San Francisco Bay Area, let us know. We can arrange a spin through our usability labs at headquarters. OAUX Expo: This open-house forum gives partners a look at what the UX team is working on, and showcases the next-generation user experiences in a demo environment where attendees can see and touch the applications. UX Direct: Use the same methods that Oracle uses to develop its own user experiences. We help you define your users and their needs, and then provide direction on how to tailor the best user experience you can for them. For CustomersAngela Johnston, Gozel Aamoth, Teena Singh, and Yen Chan, Oracle Lab tours: See demos of soon-to-be-released products, and take a spin on usability research equipment such as our eye-tracker. Watch this video to get an idea of what you’ll see. Get our newsletter: Learn about newly released products and see where you can meet us at user group conferences. Participate in a feedback session: Join a focus group or customer feedback session to get an early look at user experience designs for the next generation of software, and provide your thoughts on how well it will work. Join the OUAB: The Oracle Usability Advisory Board meets several times a year to discuss trends in the workforce and provide direction on user experience designs. UX Direct: Use the same methods that Oracle uses to develop its own user experiences. We help you define your users and their needs, and then provide direction on how to tailor the best user experience you can for them. For Developers (customers, partners, and consultants): Plinio Arbizu, SP Solutions, Richard Bingham, Oracle, Balaji Kamepalli, EiSTechnoogies, Praveen Pillalamarri, EiSTechnologies How to Build Great-Looking, Usable Apps: This workshop is for attendees with a strong technology background who are looking for ways to tailor customer software using ADF. It includes an introduction to UX design patterns and provides tools to build usability-tested UX designs.  See above for dates and times. UX design patterns web site: Cut the length of your project down by months. Use these patterns to build out the task flow you need to develop for your users. The patterns have already been usability-tested and represent the best practices that the Oracle UX research team has found in its studies. UX Direct: Use the same methods that Oracle uses to develop its own user experiences. We help you define your users and their needs, and then provide direction on how to tailor the best user experience you can for them. For Oracle Sales Mike Klein, Jeremy Ashley, Brent White, Oracle Contact your local sales person for more information about the Oracle user experience and the training available from the Applications User Experience Communications & Outreach team. See customer-friendly user experience collateral ranging from the new simplified UI in Oracle Fusion Applications Release 7, to E-Business Suite user experience highlights, to Siebel, PeopleSoft, and JD Edwards user experience highlights.   Receive access to the same pre-sales and implementation training we provide to partners. For Oracle Sales only: Oracle-only training on the Oracle Fusion Applications UX Innovation Sales Kit.

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >