Search Results

Search found 336 results on 14 pages for 'lite'.

Page 12/14 | < Previous Page | 8 9 10 11 12 13 14  | Next Page >

  • Looking for home networking hardware and software advice

    - by phobos7
    Note: I originally wrote this up in a blog post. I've removed any affiliate links that I put in my original post to ensure I don't annoy anybody. I've recently moved home and I now need to go to the trouble of sorting out my home network yet again. We had Virgin broadband in Hertford but you can't get Virgin in the street we've moved to so I've had to go with O2 Broadband. Normally I prefer to use my own hardward, and previously used the DLink DIR-655 router which was great, but in this situation I am using the O2 Wirelss Box III since I only have an old Netgear DG834PN Wireless G modem router and I'd rather be using Wireless N. Anyway, the place we have moved into has only one phone point in the hallway, has the best TV point in one room and the best place to put the TV and other entertainment stuff in yet another room. So, networking the house up for Internet and TV is required. The diagram below shows the things that I'll have in my home network but there are three points where I'm not quite sure what hardware to us. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a Media Centre/PC and a couple of consoles to the network. I'm pretty much settled on us an Acer Aspire Revo R3600 as my media PC, probably with Ubuntu or Windows and XBMC installed. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a device that can decode and stream TV from a TV aerial across the network. The device that is connected to 2). At the moment I'm considering a HDHomeRun by SiliconDust. At the moment I'm considering either the TP LINK TL-WA701ND 150Mbps Wireless Lite N Access Point (very cheap at Amazon) or the Netgear 5 GHz Wireless-N HD Access Point/Bridge. I'd love to get some insight into what you would do in my situation. What Wireless Access Point/Bridge should I put at points 1) and 2)? What device should I choose for point 3) that can decode and stream a TV signal? Is the Acer Aspire Revo R3600 a good choice? ![alt text][6] Note 2: I've also posted this question on AVForums.

    Read the article

  • Determining the health of a Cisco switch port?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Can't ping devices by IP address for devices allocated IPs by DHCP

    - by GiddyUpHorsey
    I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

    Read the article

  • Why apcupsd won't see the UPS connected to the USB posrt on FreeBSD 8.0 amd64

    - by Max Kosyakov
    Hello, Recently I installed an apcusbd on a FreeBSD 8.0 amd64 box via ports system. It installed perfectly but it won't run. Here what is says in the log: FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device It appeared that HID driver picked the /dev/ugen4.2 which could cause the apcusb being unable to find the device. After I had discovered this, I rebuilt the kernel and removed the hid driver. Now it just shows "ugen4.2: <Tripp Lite> at usbus4" and no uhid0 device appears. Nevertheless the problem persisted. I tried to leave the DEVICE config setting blank --- won't help. Then I specified the particular device in the config, but it did not help either. Below you is the output of several commands that can provide some useful information on my case. server# /usr/local/etc/rc.d/apcupsd start Starting apcupsd. server# tail /var/log/messages | grep apcupsd Jun 17 22:30:00 server apcupsd[1520]: apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see . Jun 17 22:30:00 server apcupsd[1520]: apcupsd error shutdown completed server# cat /usr/local/etc/apcupsd/apcupsd.conf ## apcupsd.conf v1.1 ## UPSCABLE usb UPSTYPE usb DEVICE /dev/ugen4.2 LOCKFILE /var/lock UPSCLASS standalone UPSMODE disable server# dmesg | grep '^u' uhci0: port 0xa800-0xa81f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f00 usbus0: on uhci0 uhci1: port 0xa880-0xa89f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f00 usbus1: on uhci1 uhci2: port 0xac00-0xac1f irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f00 usbus2: on uhci2 usbus3: EHCI version 1.0 usbus3: on ehci0 uhci3: port 0xa080-0xa09f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0f00 usbus4: on uhci3 uhci4: port 0xa400-0xa41f irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0f00 usbus5: on uhci4 uhci5: port 0xa480-0xa49f irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x0f00 usbus6: on uhci5 usbus7: EHCI version 1.0 usbus7: on ehci1 uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ugen4.2: at usbus4 server#

    Read the article

  • Is my Cisco switch port bad?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Why many applications close after opening a document or doing a specific actions?

    - by Mohsen Farjami
    I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

    Read the article

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • Drupal views pane content not visible

    - by jwandborg
    I have a pane on my front page with one content pane and two views panes. I can't see the content of the third view ($pane->pid = "new-3" / comment: # Senaste bilder). Here's my panel <?php $page = new stdClass; $page->disabled = FALSE; /* Edit this to true to make a default page disabled initially */ $page->api_version = 1; $page->name = 'frontpage'; $page->task = 'page'; $page->admin_title = 'Startsida'; $page->admin_description = ''; $page->path = 'hem'; $page->access = array(); $page->menu = array(); $page->arguments = array(); $page->conf = array(); $page->default_handlers = array(); $handler = new stdClass; $handler->disabled = FALSE; /* Edit this to true to make a default handler disabled initially */ $handler->api_version = 1; $handler->name = 'page_frontpage_panel_context'; $handler->task = 'page'; $handler->subtask = 'frontpage'; $handler->handler = 'panel_context'; $handler->weight = 0; $handler->conf = array( 'title' => 'Panel', 'no_blocks' => FALSE, 'css_id' => '', 'css' => '', 'contexts' => array(), 'relationships' => array(), ); $display = new panels_display; $display->layout = 'onecol'; $display->layout_settings = array(); $display->panel_settings = array(); $display->cache = array(); $display->title = ''; $display->content = array(); $display->panels = array(); # Bild $pane = new stdClass; $pane->pid = 'new-1'; $pane->panel = 'middle'; $pane->type = 'custom'; $pane->subtype = 'custom'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'admin_title' => '', 'title' => '', 'body' => '<img src="/sites/all/themes/zen/ils-2010/img/graphics-start-text-v3.png" alt="Hej! Vi vet att du och dina klasskompisar har mycket att tänka på under er sista termin i gymnasiet. Därför har vi samlat några saker som vi tror kommer göra er studenttid lite roligare och lite enklare. Välkommen!" />', 'format' => '2', 'substitute' => TRUE, ); $pane->cache = array(); $pane->style = array(); $pane->css = array(); $pane->extras = array(); $pane->position = 0; $display->content['new-1'] = $pane; $display->panels['middle'][0] = 'new-1'; # Topplista $pane = new stdClass; $pane->pid = 'new-2'; $pane->panel = 'middle'; $pane->type = 'views_panes'; $pane->subtype = 'topplista_terms-panel_pane_1'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'link_to_view' => 1, 'more_link' => 0, 'use_pager' => 0, 'pager_id' => '', 'items_per_page' => '10', 'offset' => '0', 'path' => 'flaktavling/topplista/klasser', 'override_title' => 0, 'override_title_text' => '', ); $pane->cache = array(); $pane->style = array(); $pane->css = array(); $pane->extras = array(); $pane->position = 1; $display->content['new-2'] = $pane; $display->panels['middle'][1] = 'new-2'; # Senaste bilder $pane = new stdClass; $pane->pid = 'new-3'; $pane->panel = 'middle'; $pane->type = 'views_panes'; $pane->subtype = 'senaste_bilderna-panel_pane_1'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'link_to_view' => 0, 'more_link' => 0, 'use_pager' => 0, 'pager_id' => '', 'items_per_page' => '2', 'offset' => '0', 'path' => 'galleri/senaste-bilder', 'override_title' => 0, 'override_title_text' => '', ); $pane->cache = array(); $pane->style = array(); $pane->css = array( 'css_id' => 'pane-senaste-bilderna', 'css_class' => '', ); $pane->extras = array(); $pane->position = 2; $display->content['new-3'] = $pane; $display->panels['middle'][2] = 'new-3'; $display->hide_title = PANELS_TITLE_FIXED; $display->title_pane = 'new-1'; $handler->conf['display'] = $display; $page->default_handlers[$handler->name] = $handler; Here´s the view senaste_bilderna <?php $view = new view; $view->name = 'senaste_bilderna'; $view->description = ''; $view->tag = ''; $view->view_php = ''; $view->base_table = 'node'; $view->is_cacheable = FALSE; $view->api_version = 2; $view->disabled = FALSE; /* Edit this to true to make a default view disabled initially */ $handler = $view->new_display('default', 'Förvalt', 'default'); $handler->override_option('fields', array( 'field_picture_fid' => array( 'id' => 'field_picture_fid', 'table' => 'node_data_field_picture', 'field' => 'field_picture_fid', ), )); $handler->override_option('sorts', array( 'created' => array( 'order' => 'DESC', 'granularity' => 'second', 'id' => 'created', 'table' => 'node', 'field' => 'created', 'relationship' => 'none', ), )); $handler->override_option('filters', array( 'type' => array( 'operator' => 'in', 'value' => array( 'ils_picture' => 'ils_picture', ), 'group' => '0', 'exposed' => FALSE, 'expose' => array( 'operator' => FALSE, 'label' => '', ), 'id' => 'type', 'table' => 'node', 'field' => 'type', 'override' => array( 'button' => 'Åsidosätt', ), 'relationship' => 'none', ), )); $handler->override_option('access', array( 'type' => 'none', )); $handler->override_option('cache', array( 'type' => 'none', )); $handler->override_option('title', 'Senaste bilderna från galleriet'); $handler->override_option('items_per_page', 2); $handler->override_option('row_options', array( 'inline' => array( 'field_picture_fid' => 'field_picture_fid', ), 'separator' => '', 'hide_empty' => 0, )); $handler = $view->new_display('panel_pane', 'Content pane', 'panel_pane_1'); $handler->override_option('pane_title', ''); $handler->override_option('pane_description', ''); $handler->override_option('pane_category', array( 'name' => 'View panes', 'weight' => 0, )); $handler->override_option('allow', array( 'use_pager' => FALSE, 'items_per_page' => FALSE, 'offset' => FALSE, 'link_to_view' => FALSE, 'more_link' => FALSE, 'path_override' => FALSE, 'title_override' => FALSE, 'exposed_form' => FALSE, )); $handler->override_option('argument_input', array()); $handler->override_option('link_to_view', 0); $handler->override_option('inherit_panels_path', 0); $handler = $view->new_display('page', 'Sida', 'page_1'); $handler->override_option('path', 'galleri/senaste-bilderna'); $handler->override_option('menu', array( 'type' => 'none', 'title' => '', 'description' => '', 'weight' => 0, 'name' => 'navigation', )); $handler->override_option('tab_options', array( 'type' => 'none', 'title' => '', 'description' => '', 'weight' => 0, )); I have edited one views template, here's the code in the file views-view-fields--senaste-bilderna.tpl.php <?php // $Id: views-view-fields.tpl.php,v 1.6 2008/09/24 22:48:21 merlinofchaos Exp $ /** * @file views-view-fields.tpl.php * Default simple view template to all the fields as a row. * * - $view: The view in use. * - $fields: an array of $field objects. Each one contains: * - $field->content: The output of the field. * - $field->raw: The raw data for the field, if it exists. This is NOT output safe. * - $field->class: The safe class id to use. * - $field->handler: The Views field handler object controlling this field. Do not use * var_export to dump this object, as it can't handle the recursion. * - $field->inline: Whether or not the field should be inline. * - $field->inline_html: either div or span based on the above flag. * - $field->separator: an optional separator that may appear before a field. * - $row: The raw result object from the query, with all data it fetched. * * @ingroup views_templates */ ?> <?php foreach ($fields as $id => $field): ?> <?php $result = db_query('SELECT * FROM {files} WHERE fid = ' . $row->node_data_field_picture_field_picture_fid ); ?> <?php $data = db_fetch_object( $result ); ?> <div id="senaste-bilderna-first"><img src="<?= imagecache_create_url('senaste_bilderna_thumbnail', $data->filepath) ?>" alt="" /></div> <?php /* if (!empty($field->separator)): <?php print $field->separator; <?php endif; <<?php print $field->inline_html; class="views-field-<?php print $field->class; "> <?php if ($field->label): <label class="views-label-<?php print $field->class; "> <?php print $field->label; : </label> <?php endif; <?php // $field->element_type is either SPAN or DIV depending upon whether or not // the field is a 'block' element type or 'inline' element type. <<?php print $field->element_type; class="field-content"><?php print $field->content; </<?php print $field->element_type; > </<?php print $field->inline_html;> <?php*/ endforeach; ?> This is the result <div class="panel-separator"> </div> <div class="panel-pane pane-views-panes pane-senaste-bilderna-panel-pane-1" id="pane-senaste-bilderna"> <h2 class="pane-title">Senaste bilderna från galleriet </h2> <div class="pane-content"> <div class="view view-senaste-bilderna view-id-senaste_bilderna view-display-id-panel_pane_1 view-dom-id-2"> <div class="view-content"> <div class="views-row views-row-1 views-row-odd views-row-first"> </div> <div class="views-row views-row-2 views-row-even views-row-last"> </div> </div> </div> </div> </div> My Drupal version is 6.16

    Read the article

  • BI&EPM in Focus June 2014

    - by Mike.Hallett(at)Oracle-BI&EPM
    Applications Webcast Centre – A Library of Discussion and Research for Best Practice: Achieving Reliable Planning, Budgeting and Forecasting Talent Analytics and Big Data – Is HR ready for the challenge Enterprise Data – The cost of non-quality Customers Josephine Niemiec from ADP talks about Oracle Hyperion Workforce Planning at Collaborate 2014 (link) Video Chris Nelms from Ameren talks about Oracle BI Spend and Procurement Analytics at Collaborate 2014 (link) Video Leggett & Platt Leverages Oracle Hyperion EPM and Demantra (link) Video Pella Corporation Accelerates Close Cycle by Cutting Time for Financial Consolidation from Three Days to Less Than One Day (link) Secretaría General de Administración de Justicia en España Enhances Citizen Services with Near-Real-Time Business Intelligence Gleaned from 500 Databases  (link) Bellco Credit Union Speeds Budget Development by 30%—Gains Insight into Specific Branch and Financial Product Profitability  (link)  Video QDQ media Speeds up Financial Reporting by 24x, Gains Business Agility, and Integrates Seamlessly into Corporate Accounting System  (link) Westfield Group Maximizes Shopping Mall Revenue, Shortens Year-End Financial Consolidation by 75%  (link)  IL&FS Transportation Networks Shortens Financial Consolidation and Reporting Cycle by Eight Days, Gains In-Depth Insight into Business Performance   (link) Angel Trains Optimizes Rail Operations for Purchasing, Sourcing, and Project Management to Meet Challenges of Evolving Rail Industry  (link) Enterprise Performance Management June 11, at Oracle Utrecht, NL: Morning session: Explore Planning and Budgeting in the Cloud (link) June 12, London: PureApps Presents: Best Practice Financial Consolidation and Reporting Workshop (link) July 3, Koln: Oracle Hyperion Business Analytics Roundtable (link) Blog: What's Your Tax Strategy? Automate the Operational Transfer Pricing Process (link) YouTube Video: Automate Tax Reporting with Oracle Hyperion Tax Provision (link) YouTube Video: Introducing Oracle Hyperion Planning’s Tablet Optimized Interface (link) OracleEPMWebcasts @ YouTube (link) Partner webcasts: Wednesday, 4 June, 5.00 GMT - Case Study:  Lessons Learned from Edgewater Ranzal's Internal Implementation of Oracle Planning & Budgeting Cloud Service (PBCS) - Learn more and register here! Thursday, 5 June, 4.00 GMT - Achieving Accountable Care Using Oracle Technology - Learn more and register here! Tuesday, 17 June, 4.00 GMT - Optimizing Performance for Oracle EPM Systems - Learn more and register here! Oracle University Blog: The Coolest Features Available with Oracle Hyperion 11.1.2.3 – Training from OU to help you to best use them (link) Support: Proactive Support: EPM Hyperion Planning 11.1.2.3.500 Using RMI Service [Blog] Proactive Support: Planning and Budgeting Cloud Service Videos (link) Planning and Budgeting Cloud Service (PBCS) 11.1.2.3.410 Patch Bundle [Doc ID 1670981.1] Hyperion Analytic Provider Services 11.1.2.2.106 Patch Set Update [Doc ID 1667350.1] Hyperion Essbase 11.1.2.2.106 Patch Set Update [Doc ID 1667346.1] Hyperion Essbase Administration Services 11.1.2.2.106 Patch Set Update [Doc ID 1667348.1] Hyperion Essbase Studio 11.1.2.2.106 Patch Set Update [Doc ID 1667329.1] Hyperion Smart View 11.1.2.5.210 Patch Set Update [Doc ID 1669427.1] Using HPCM, HSF or DRM Communities (link) Business Intelligence June 12, Birmingham, UK: Oracle Big Data at Work - Use Cases and Architecture (link) June 17, London: Oracle at Cloud & Big Data World Forums (link) June 17, Partner Webcast: Transform your Planning Capabilities with Peloton's CloudAccelerator for Oracle PBCS (link) June 19, London: Oracle at the Whitehall Media Big Data Analytics Conference and Exhibition (link) June 19, London: Partner Event - Agile BI Conference by Peak Indicators [link] June 25, Munich: Oracle Special Day auf der TDWI 2014 Konferenz (link) July 15, London: Oracle Endeca Information Discovery Workshop (link) July 16, London: BI Applications Workshop – Financial Analytics & Procurement Analytics (link) July 17, London: BI Applications Workshop – HR Analytics (link) Milan, Italy: L’Osservatorio Big Data Analytics & Business Intelligence with Politecnico di Milano (link) OBIA 11.1.1.8.1 - Now Available [Blog] What’s New in OBIA 11.1.1.8.1 [Blog] BI Blog: A closer look at Oracle BI Applications 11.1.1.8.1 release (link) Press Release: BI Applications Deliver Greater Insight into Talent and Procurement (link) Support Blog: OBIA 11.1.1.8.1 Upgrade Guide & Documentation (link) YouTube Video: Glenn Hoormann of Ludus talks to us about Oracle Business Intelligence and ERP at Collaborate 2014 (Link) YouTube Video: Performance Architects talks about key BI and Mobile trends, including Endeca at Collaborate 2014 (link) Big Data Blog: 3 Keys for Using Big Data Effectively for Enhanced Customer Experience (link) Big Data Lite Demo VM 3.0 Now Available on OTN BI Blog: Data Relationship Governance - Workflow in a Bottle (link) MDM Blog: Register for Product Data Management Weekly Cloudcasts (link) MDM Blog: Improve your Customer Experience with High Quality Information (link) MDM Blog: Big Data Challenges & Considerations (link) Oracle University: Oracle BI Applications 11g: Implementation using ODI (link) Proactive Support: Monthly Index [Blog] My Oracle Support: Partner Accreditation for Business Analytics Support [Blog] OBIEE 11g Test-to-Production (T2P) / Clone Procedures Guide [Blog] Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Visual Studio &amp; TFS 11 &ndash; List of extensions and upgrades

    - by terje
    This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010.  The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it.  The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support.  I will add them as they arrive.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010.   Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012     Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes             #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft       Coding Yes Inmeta Build Explorer     Free TFS integration No Build Manager Community Build Manager. Info here from Jakob   Free TFS Integration No Code Contracts Coming real soon   Free Coding & Quality Yes Code Contracts Editor Extensions     Free Coding & Quality Yes Web Std Update     Free Coding (Web) Yes (MSFT) Web Essentials     Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0   Free Coding/Investigation No dotTrace     Licensed Quality No NDepend   Licensed Quality No tangible T4 editor     Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes.     Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes  Was Moles in 2010. Fakes is improved and made into a product.  NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11   Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue.  Oct 2011 SQL Server 2008 R2 SP1

    Read the article

  • Silverlight Cream Monday WP7 App Review # 1

    - by Dave Campbell
    I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Android:How to display images from the in a ListView?

    - by Maxood
    Android:How to display images from the web in a ListView?I have the following code to display image from a URL in an ImageView: import java.io.IOException; import java.io.InputStream; import java.net.HttpURLConnection; import java.net.URL; import java.net.URLConnection; import android.app.ListActivity; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.os.Bundle; import android.widget.ImageView; public class HttpImgDownload extends ListActivity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Bitmap bitmap = // DownloadImage( // "http://www.streetcar.org/mim/cable/images/cable-01.jpg"); DownloadImage( "http://s.twimg.com/a/1258674567/images/default_profile_3_normal.png"); ImageView img = (ImageView) findViewById(R.id.img); img.setImageBitmap(bitmap); } private InputStream OpenHttpConnection(String urlString) throws IOException { InputStream in = null; int response = -1; URL url = new URL(urlString); URLConnection conn = url.openConnection(); if (!(conn instanceof HttpURLConnection)) throw new IOException("Not an HTTP connection"); try{ HttpURLConnection httpConn = (HttpURLConnection) conn; httpConn.setAllowUserInteraction(false); httpConn.setInstanceFollowRedirects(true); httpConn.setRequestMethod("GET"); httpConn.connect(); response = httpConn.getResponseCode(); if (response == HttpURLConnection.HTTP_OK) { in = httpConn.getInputStream(); } } catch (Exception ex) { throw new IOException("Error connecting"); } return in; } private Bitmap DownloadImage(String URL) { Bitmap bitmap = null; InputStream in = null; try { in = OpenHttpConnection(URL); bitmap = BitmapFactory.decodeStream(in); in.close(); } catch (IOException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } return bitmap; } } Now how can i display images in an array in a listview? Here's how i want to display the images: http://sites.google.com/site/androideyecontact/_/rsrc/1238086823282/Home/android-eye-contact-lite/eye_contact-list_view_3.png?height=420&width=279

    Read the article

  • Specialization of template after instantiation?

    - by Onur Cobanoglu
    Hi, My full code is too long, but here is a snippet that will reflect the essence of my problem: class BPCFGParser { public: ... ... class Edge { ... ... }; class ActiveEquivClass { ... ... }; class PassiveEquivClass { ... ... }; struct EqActiveEquivClass { ... ... }; struct EqPassiveEquivClass { ... ... }; unordered_map<ActiveEquivClass, Edge *, hash<ActiveEquivClass>, EqActiveEquivClass> discovered_active_edges; unordered_map<PassiveEquivClass, Edge *, hash<PassiveEquivClass>, EqPassiveEquivClass> discovered_passive_edges; }; namespace std { template <> class hash<BPCFGParser::ActiveEquivClass> { public: size_t operator()(const BPCFGParser::ActiveEquivClass & aec) const { } }; template <> class hash<BPCFGParser::PassiveEquivClass> { public: size_t operator()(const BPCFGParser::PassiveEquivClass & pec) const { } }; } When I compile this code, I get the following errors: In file included from BPCFGParser.cpp:3, from experiments.cpp:2: BPCFGParser.h:408: error: specialization of ‘std::hash<BPCFGParser::ActiveEquivClass>’ after instantiation BPCFGParser.h:408: error: redefinition of ‘class std::hash<BPCFGParser::ActiveEquivClass>’ /usr/include/c++/4.3/tr1_impl/functional_hash.h:44: error: previous definition of ‘class std::hash<BPCFGParser::ActiveEquivClass>’ BPCFGParser.h:445: error: specialization of ‘std::hash<BPCFGParser::PassiveEquivClass>’ after instantiation BPCFGParser.h:445: error: redefinition of ‘class std::hash<BPCFGParser::PassiveEquivClass>’ /usr/include/c++/4.3/tr1_impl/functional_hash.h:44: error: previous definition of ‘class std::hash<BPCFGParser::PassiveEquivClass>’ Now I have to specialize std::hash for these classes (because standard std::hash definition does not include user defined types). When I move these template specializations before the definition of class BPCFGParser, I get a variety of errors for a variety of different things tried, and somewhere (http://www.parashift.com/c++-faq-lite/misc-technical-issues.html) I read that: Whenever you use a class as a template parameter, the declaration of that class must be complete and not simply forward declared. So I'm stuck. I cannot specialize the templates after BPCFGParser definition, I cannot specialize them before BPCFGParser definition, how may I get this working? Thanks in advance, Onur

    Read the article

  • Using in app purchase to unlock features vs. using free & paid app versions for iPhone

    - by yabada
    I have an app that I was going to release as a free (lite) version with some of the total functionality and a paid full version with advanced functionality. Now, with in app purchase for free apps I am thinking of going that route with the ability to unlock features as needed. I'm not talking about a trial version that expires.I want people to be able to try out the app and get an idea of the interface and functionality before deciding to purchase the full functionality of each major section of the app, basically. Here's an analogy of what my app would be like. Let's say you have a cooking app that teaches you to cook in different styles. There could be major section for French, Italian, and Chinese. Each section could have some rudiments unlocked in the free app so users can see the UI and basics of the functionality. Then, the user could decide to purchase each major section (or not) individually with in app purchase or buy the full versioned app (with the free/paid model). One concern I have with offering a free app with in app purchase would be with feedback. I would be very clear in my description in the app store that there is in app purchase for full features but I'm worried that less serious users could/would leave negative feedback. I suppose that's always a risk but curious about any experience with this. It also seems that it could be a whole lot more complicated keeping track of what portions of the app are locked and unlocked with in app purchase. I know I'd have to have all the code for the full functionality and "lock" the portions that haven't been purchased. How do people usually lock portions of their code? I'm not talking about the process of purchasing (I've read the In App Purchase Programming Guide) but after the purchase has been made. Would I just keep track of what the user has purchased and put conditionals on the sections that are initially locked? Or is there another way to do this as well? My instinct is for the in app purchase (particularly since users could purchase the major sections that they want individually).

    Read the article

  • C++ Virtual Constructor, without clone()

    - by Julien L.
    I want to perform "deep copies" of an STL container of pointers to polymorphic classes. I know about the Prototype design pattern, implemented by means of the Virtual Ctor Idiom, as explained in the C++ FAQ Lite, Item 20.8. It is simple and straightforward: struct ABC // Abstract Base Class { virtual ~ABC() {} virtual ABC * clone() = 0; }; struct D1 : public ABC { virtual D1 * clone() { return new D1( *this ); } // Covariant Return Type }; A deep copy is then: for( i = 0; i < oldVector.size(); ++i ) newVector.push_back( oldVector[i]->clone() ); Drawbacks As Andrei Alexandrescu states it: The clone() implementation must follow the same pattern in all derived classes; in spite of its repetitive structure, there is no reasonable way to automate defining the clone() member function (beyond macros, that is). Moreover, clients of ABC can possibly do something bad. (I mean, nothing prevents clients to do something bad, so, it will happen.) Better design? My question is: is there another way to make an abstract base class clonable without requiring derived classes to write clone-related code? (Helper class? Templates?) Following is my context. Hopefully, it will help understanding my question. I am designing a class hierarchy to perform operations on a class Image: struct ImgOp { virtual ~ImgOp() {} bool run( Image & ) = 0; }; Image operations are user-defined: clients of the class hierarchy will implement their own classes derived from ImgOp: struct CheckImageSize : public ImgOp { std::size_t w, h; bool run( Image &i ) { return w==i.width() && h==i.height(); } }; struct CheckImageResolution; struct RotateImage; ... Multiple operations can be performed sequentially on an image: bool do_operations( std::vector< ImgOp* > v, Image &i ) { std::for_each( v.begin(), v.end(), /* bind2nd(mem_fun(&ImgOp::run), i ...) don't remember syntax */ ); } int main( ... ) { std::vector< ImgOp* > v; v.push_back( new CheckImageSize ); v.push_back( new CheckImageResolution ); v.push_back( new RotateImage ); Image i; do_operations( v, i ); } If there are multiple images, the set can be split and shared over several threads. To ensure "thread-safety", each thread must have its own copy of all operation objects contained in v -- v becomes a prototype to be deep copied in each thread.

    Read the article

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • Bugzilla : No SASL mechanism found

    - by niteshsinha
    I am using Bugzilla on windows 7. I am using the unofficial Bugzilla installer. I followed the steps accordingly and gave valid credentials wherever required. I open Bugzilla and try to create a new account , but i get the following error. Software error: No SASL mechanism found at C:/Program Files/Bugzilla/perl/perl/site/lib/Authen/SASL.pm line 77 at C:/Program Files/Bugzilla/perl/perl/lib/Net/SMTP.pm line 143 i ran checksetup.pl and found that Authen::SASL and SMTP both are available on my machine. The output of checksetup.pl is as follows. * This is Bugzilla 3.6.3 on perl 5.10.1 * Running on Win7 Build 7600 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.49 Checking for Digest-SHA (any) ok: found v5.48 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.53 Checking for DateTime-TimeZone (v0.79) ok: found v1.10 Checking for DBI (v1.41) ok: found v1.609 Checking for Template-Toolkit (v2.22) ok: found v2.22 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.861) ok: found v1.903 Checking for Email-MIME-Encodings (v1.313) ok: found v1.313 Checking for Email-MIME-Modifier (v1.442) ok: found v1.903 Checking for URI (any) ok: found v1.52 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.16.1 Checking for DBD-mysql (v4.00) ok: found v4.012 Checking for DBD-Oracle (v1.19) not found The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.44 Checking for Chart (v2.1) ok: found v2.4.1 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for XML-Twig (any) ok: found v3.34 Checking for MIME-tools (v5.406) ok: found v5.427 Checking for libwww-perl (any) ok: found v5.834 Checking for PatchReader (v0.9.4) ok: found v0.9.5 Checking for perl-ldap (any) ok: found v0.39 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.17 Checking for SOAP-Lite (v0.710.06) ok: found v0.710.10 Checking for JSON-RPC (any) ok: found v0.95 Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.40) ok: found v3.64 Checking for HTML-Scrubber (any) ok: found v0.08 Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * *********************************************************************** * Note For Windows Users * *********************************************************************** * In order to install the modules listed below, you first have to run * * the following command as an Administrator: * * * * ppm repo add theory58S http://cpan.uwinnipeg.ca/PPMPackages/10xx/ * * * Then you have to do (also as an Administrator): * * * * ppm repo up theory58S * * * * Do that last command over and over until you see "theory58S" at the * * top of the displayed list. * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Reading ./localconfig... Checking for DBD-mysql (v4.00) ok: found v4.012 Checking for MySQL (v4.1.2) ok: found v5.1.44-community-log Removing existing compiled templates... Precompiling templates...done. Now that you have installed Bugzilla, you should visit the 'Parameters' page (linked in the footer of the Administrator account) to ensure it is set up as you wish - this includes setting the 'urlbase' option to the correct URL. Press any key to continue . . . Please tell me what should i do. Please note: i am running behind a corporate proxy , SSL/TLS is not used internally but i am giving the smtpUser and smtpPass also.

    Read the article

  • I have finally traded my Blackberry in for a Droid!

    - by Bob Porter
    Over the years I have used a number of different types of phones. Windows Mobile, Blackberry, Nokia, and now Android. Until the Blackberry, which was my last phone (and I still have one issued from my office) I had never found a phone that “just worked” especially with email and messaging. The Blackberry did, and does, excel at those functions. My last personal phone was a Storm 1 which was Blackberry’s first touch screen phone. The Storm 2 was an improved version that fixed some screen press detection issues from the first model and it added Wifi. Over the last few years I have watched others acquire and fall in love with their ‘Droid’s including a number of iPhone users which surprised me. Our office has until recently only supported Blackberry phones, adding iPhones within the last year or so. When I spoke with our internal telecom folks they confirmed they were evaluating Android phones, but felt they still were not secure enough out of the box for corporate use and SOX compliance. That being said, as a personal phone, the Droid Rocks! I am impressed with its speed, the number of apps available, and the overall design. It is not as “flashy” as an iPhone but it does everything that I care about and more. The model I bought is the Motorola Droid 2 Global from Verizon. It is currently running Android 2.2 for it’s OS, 2.3 is just around the corner. It has 8 gigs of internal flash memory and can handle up to a 32 gig SDCard. (I currently have 2 8 gig cards, one for backups, and have ordered a 16 gig card!) Being a geek at heart, I “rooted” the phone which means gained superuser access to the OS on the phone. And opens a number of doors for further modifications down the road. Also being a geek meant I have already setup a development environment and built and deployed the obligatory “Hello Droid” application. I will be writing of my development experiences with this new platform here often, to start off I thought I would share my current application list to give you an idea what I am using. Zedge: http://market.android.com/details?id=net.zedge.android XDA: http://market.android.com/details?id=com.quoord.tapatalkxda.activity WRAL.com: http://market.android.com/details?id=com.mylocaltv.wral Wireless Tether: http://market.android.com/details?id=android.tether Winamp: http://market.android.com/details?id=com.nullsoft.winamp Win7 Clock: http://market.android.com/details?id=com.androidapps.widget.toggles.win7 Wifi Analyzer: http://market.android.com/details?id=com.farproc.wifi.analyzer WeatherBug: http://market.android.com/details?id=com.aws.android Weather Widget Forecast Addon: http://market.android.com/details?id=com.androidapps.weather.forecastaddon Weather & Toggle Widgets: http://market.android.com/details?id=com.androidapps.widget.weather2 Vlingo: http://market.android.com/details?id=com.vlingo.client VirtualTENHO-G: http://market.android.com/details?id=jp.bustercurry.virtualtenho_g Twitter: http://market.android.com/details?id=com.twitter.android TweetDeck: http://market.android.com/details?id=com.thedeck.android.app Tricorder: http://market.android.com/details?id=org.hermit.tricorder Titanium Backup PRO: http://market.android.com/details?id=com.keramidas.TitaniumBackupPro Titanium Backup: http://market.android.com/details?id=com.keramidas.TitaniumBackup Terminal Emulator: http://market.android.com/details?id=jackpal.androidterm Talking Tom Free: http://market.android.com/details?id=com.outfit7.talkingtom Stock Blue: http://market.android.com/details?id=org.adw.theme.stockblue ST: Red Alert Free: http://market.android.com/details?id=com.oldplanets.redalertwallpaper ST: Red Alert: http://market.android.com/details?id=com.oldplanets.redalertwallpaperplus Solitaire: http://market.android.com/details?id=com.kmagic.solitaire Skype: http://market.android.com/details?id=com.skype.raider Silent Time Lite: http://market.android.com/details?id=com.QuiteHypnotic.SilentTime ShopSavvy: http://market.android.com/details?id=com.biggu.shopsavvy Shopper: http://market.android.com/details?id=com.google.android.apps.shopper Shiny clock: http://market.android.com/details?id=com.androidapps.clock.shiny ShareMyApps: http://market.android.com/details?id=com.mattlary.shareMyApps Sense Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.senseglassadwtheme ROM Manager: http://market.android.com/details?id=com.koushikdutta.rommanager Roboform Bookmarklet Installer: http://market.android.com/details?id=roboformBookmarkletInstaller.android.com RealCalc: http://market.android.com/details?id=uk.co.nickfines.RealCalc Package Buddy: http://market.android.com/details?id=com.psyrus.packagebuddy Overstock: http://market.android.com/details?id=com.overstock OMGPOP Toggle: http://market.android.com/details?id=com.androidapps.widget.toggle.omgpop OI File Manager: http://market.android.com/details?id=org.openintents.filemanager nook: http://market.android.com/details?id=bn.ereader MyAtlas-Google Maps Navigation ext: http://market.android.com/details?id=com.adaptdroid.navbookfree3 MSN Droid: http://market.android.com/details?id=msn.droid.im Matrix Live Wallpaper: http://market.android.com/details?id=com.jarodyv.livewallpaper.matrix LogMeIn: http://market.android.com/details?id=com.logmein.ignitionpro.android Liveshare: http://market.android.com/details?id=com.cooliris.app.liveshare Kobo: http://market.android.com/details?id=com.kobobooks.android Instant Heart Rate: http://market.android.com/details?id=si.modula.android.instantheartrate IMDb: http://market.android.com/details?id=com.imdb.mobile Home Plus Weather: http://market.android.com/details?id=com.androidapps.widget.skin.weather.homeplus Handcent SMS: http://market.android.com/details?id=com.handcent.nextsms H7C Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skin.h7c GTasks: http://market.android.com/details?id=org.dayup.gtask GPS Status: http://market.android.com/details?id=com.eclipsim.gpsstatus2 Google Voice: http://market.android.com/details?id=com.google.android.apps.googlevoice Google Sky Map: http://market.android.com/details?id=com.google.android.stardroid Google Reader: http://market.android.com/details?id=com.google.android.apps.reader GoMarks: http://market.android.com/details?id=com.androappsdev.gomarks Goggles: http://market.android.com/details?id=com.google.android.apps.unveil Glossy Black Weather: http://market.android.com/details?id=com.androidapps.widget.weather.skin.glossyblack Fox News: http://market.android.com/details?id=com.foxnews.android Foursquare: http://market.android.com/details?id=com.joelapenna.foursquared FBReader: http://market.android.com/details?id=org.geometerplus.zlibrary.ui.android Fandango: http://market.android.com/details?id=com.fandango Facebook: http://market.android.com/details?id=com.facebook.katana Extensive Notes Pro: http://market.android.com/details?id=com.flufflydelusions.app.extensive_notes_donate Expense Manager: http://market.android.com/details?id=com.expensemanager Espresso UI (LightShow w/ Slide): http://market.android.com/details?id=com.jaguirre.slide.lightshow Engadget: http://market.android.com/details?id=com.aol.mobile.engadget Earth: http://market.android.com/details?id=com.google.earth Drudge: http://market.android.com/details?id=com.iavian.dreport Dropbox: http://market.android.com/details?id=com.dropbox.android DroidForums: http://market.android.com/details?id=com.quoord.tapatalkdrodiforums.activity DroidArmor ADW: http://market.android.com/details?id=mobi.addesigns.droidarmorADW Droid Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.skins.white Droid 2 Bootstrapper: http://market.android.com/details?id=com.koushikdutta.droid2.bootstrap doubleTwist: http://market.android.com/details?id=com.doubleTwist.androidPlayer Documents To Go: http://market.android.com/details?id=com.dataviz.docstogo Digital Clock Widget: http://market.android.com/details?id=com.maize.digitalClock Desk Home: http://market.android.com/details?id=com.cowbellsoftware.deskdock Default Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skins.defaultclock Daily Expense Manager: http://market.android.com/details?id=com.techahead.ExpenseManager ConnectBot: http://market.android.com/details?id=org.connectbot Colorized Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.colorized Chrome to Phone: http://market.android.com/details?id=com.google.android.apps.chrometophone CardStar: http://market.android.com/details?id=com.cardstar.android Books: http://market.android.com/details?id=com.google.android.apps.books Black Ipad Toggle: http://market.android.com/details?id=com.androidapps.toggle.widget.skin.blackipad Black Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.blackglassadwtheme Bing: http://market.android.com/details?id=com.microsoft.mobileexperiences.bing BeyondPod Unlock Key: http://market.android.com/details?id=mobi.beyondpod.unlockkey BeyondPod: http://market.android.com/details?id=mobi.beyondpod BeejiveIM: http://market.android.com/details?id=com.beejive.im Beautiful Widgets Animations Addon: http://market.android.com/details?id=com.levelup.bw.forecast Beautiful Widgets: http://market.android.com/details?id=com.levelup.beautifulwidgets Beautiful Live Weather: http://market.android.com/details?id=com.levelup.beautifullive BBC News: http://market.android.com/details?id=net.jimblackler.newswidget Barnacle Wifi Tether: http://market.android.com/details?id=net.szym.barnacle Barcode Scanner: http://market.android.com/details?id=com.google.zxing.client.android ASTRO SMB Module: http://market.android.com/details?id=com.metago.astro.smb ASTRO Pro: http://market.android.com/details?id=com.metago.astro.pro ASTRO Bluetooth Module: http://market.android.com/details?id=com.metago.astro.network.bluetooth ASTRO: http://market.android.com/details?id=com.metago.astro AppBrain App Market: http://market.android.com/details?id=com.appspot.swisscodemonkeys.apps App Drawer Icon Pack: http://market.android.com/details?id=com.adwtheme.appdrawericonpack androidVNC: http://market.android.com/details?id=android.androidVNC AndroidGuys: http://market.android.com/details?id=com.handmark.mpp.AndroidGuys Android System Info: http://market.android.com/details?id=com.electricsheep.asi AndFTP: http://market.android.com/details?id=lysesoft.andftp ADWTheme Red: http://market.android.com/details?id=adw.theme.red ADWLauncher EX: http://market.android.com/details?id=org.adwfreak.launcher ADW.Theme.One: http://market.android.com/details?id=org.adw.theme.one ADW.Faded theme: http://market.android.com/details?id=com.xrcore.adwtheme.faded ADW Gingerbread: http://market.android.com/details?id=me.robertburns.android.adwtheme.gingerbread Advanced Task Killer Free: http://market.android.com/details?id=com.rechild.advancedtaskkiller Adobe Reader: http://market.android.com/details?id=com.adobe.reader Adobe Flash Player 10.1: http://market.android.com/details?id=com.adobe.flashplayer Adobe AIR: http://market.android.com/details?id=com.adobe.air 3G Auto OnOff: http://market.android.com/details?id=com.yuantuo --- Generated by ShareMyApps http://market.android.com/details?id=com.mattlary.shareMyApps Sent from my Droid

    Read the article

  • Computer crashes on resume from standby almost every time

    - by Los Frijoles
    I am running Ubuntu 12.04 on a Core i5 2500K and ASRock Z68 Pro3-M motherboard (no graphics card, hd is a WD Green 1TB, and cd drive is some cheap lite-on drive). Since installing 12.04, my computer has been freezing after resume, but not every time. When I start to resume, it starts going normally with a blinking cursor on the screen and then sometimes it will continue on to the gnome 3 unlock screen. Most of the time, however, it will blink for a little bit and then the monitor will flip modes and shut off due to no signal. Pressing keys on the keyboard gets no response (num lock light doesn't respond, Ctrl-Alt-F1 fails to drop it into a terminal, Ctrl-Alt-Backspace doesn't work) and so I assume the computer is crashed. The worst part is, the logs look entirely normal. Here is my system log during one of these crashes and my subsequent hard poweroff and restart: Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-1, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[12419]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 22:09:01 kcuzner-desktop CRON[9061]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:17:01 kcuzner-desktop CRON[22142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 22:39:01 kcuzner-desktop CRON[26909]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560822] show_signal_msg: 36 callbacks suppressed Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560828] chromium-browse[9139]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:05:43 kcuzner-desktop kernel: [58586.415158] chromium-browse[21025]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:09:01 kcuzner-desktop CRON[13542]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 23:12:43 kcuzner-desktop kernel: [59006.317590] usb 2-1.7: USB disconnect, device number 8 Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319672] sd 7:0:0:0: [sdg] Synchronizing SCSI cache Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319737] sd 7:0:0:0: [sdg] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jun 6 23:17:01 kcuzner-desktop CRON[26580]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 23:19:04 kcuzner-desktop acpid: client connected from 29925[0:0] Jun 6 23:19:04 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30131 of process 30131 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 1 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30162 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 2 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30163 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 3 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30166 of process 30166 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 4 threads of 2 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop pulseaudio[30166]: [pulseaudio] pid.c: Daemon already running. Jun 6 23:19:10 kcuzner-desktop acpid: client 2942[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client 29925[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client connected from 1286[0:0] Jun 6 23:19:10 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:28:12 kcuzner-desktop kernel: imklog 5.8.6, log source = /proc/kmsg started. Jun 6 23:28:12 kcuzner-desktop rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1053" x-info="http://www.rsyslog.com"] start Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's groupid changed to 103 Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's userid changed to 101 Jun 6 23:28:12 kcuzner-desktop rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Ericsson MBM Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Sierra Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Generic Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Huawei Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Linktop Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Failed to init gatt_example plugin Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Listening for HCI events on hci0 Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> NetworkManager (version 0.9.4.0) is starting... Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> DNS: loaded plugin dnsmasq Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu Sorry it's so huge; the restart happens at 23:28:12 I believe and all I see is that chromium segfaulted a few times. I wouldn't think a segfault from an individual program on the computer would crash it, but could that be the issue?

    Read the article

  • 24+ Coda Alternatives for Windows and Linux

    - by Matt
    Coda plays an important role in designing layout on Mac. There are numerous coda alternatives for windows and Linux too. It is not possible to describe each and everyone so some of the coda alternatives, which work on both windows and Linux platforms, are discussed below. EditPlus $35.00 Good thing about EditPlus is that it highlights URLs and email addresses, activating them when you ‘crtl + double-click’. It also has a built in browser for previewing HTML, and FTP and SFTP support. Also supports Macros and RegEx find and replace. UltraEdit $49.99 It is another good coda alternative for windows and Linux. It is the best suited editor for text, HTML and HEX. It also plays an advanced PHP, Perl, Java and JavaScript editor for programmers. It supports disk-based 64-bit or standard file handling on 32-bit Windows platforms or window 2000 and later versions. HippoEdit $39.95 HippoEDIT has the best autocomplete it gives pop a ‘tooltip’ above your cursor as you type, suggesting words you’ve already typed. It does syntax highlighting for over 2 dozen language. Sublime Text $59.00 Sublime Text awesome ‘zoomed out’ view of the file lets you focus on the area you want. It lets you open a local file when you right-click on its link, and there are a few automation features, so this would make a solid choice of a text editor. Textpad $24.70 TextPad is simple editor with nifty features such as column select, drag-and-drop text between files, and hyperlink support. It also supports large files. Aptana Free Aptana Studio is one of the best editors working on both windows and Linux. It is a complete web development setting that has a nice blend of powerful authoring tools with a collection of online hosting and collaboration services. It is quite helpful as it support for PHP, CSS, FTP, and more. SciTE Free It is a SCIntilla based Text Editor. It has gradually developed as a generally useful editor. It provides for building and running programs. It is best to be used for jobs with simple configurations. SciTE is currently available for Intel Win32 and Linux compatible operating systems with GTK+. It has been run on Windows XP and on Fedora 8 and Ubuntu 7.10 with GTK+ 2.12 E Text Editor $34.96 E Text Editor is a new text editor for Windows, which also works on Linux as well. It has powerful editing features and also some unique abilities. It makes text manipulation quite fast and easy, and makes user focus on his writing as it automatically does all the manual work. It can be extend it in any language. It supports Text Mate bundles, thus allows the user to tap into a huge and active community. Editra Free Editra is an upcoming editor, with some fantastic features such as user profiles, auto-completion, session saving, and syntax highlighing for 60+ languages. Plugins can extend the feature set, offering an integrated python console, FTP client, file browser, and calculator, among others. PSPad Free PSPad is a good Template for writing CSS, as it an internal web browser, and a macro recorder to the table. It also supports hex editing, and some degree of code compiling. JEdit Free It is a mature programmer’s text editor and has taken a good deal of time to be developed as it is today. It is better than many costlier development tools due to its features and simplicity of use. It has been released as free software with full source code, provided under the terms of the GPL 2.0. Which also adds to its attractiveness. NEdit Free It is a multi-purpose text editor for the X Window System, which also works on Linux. It combines a standard, easy to use, graphical user interface with the full functionality and stability required by users who edit text for long period a day. It also provides for thorough support for development in various languages. It also facilitates the use of text processors, and other tools at the same time. It can be used productively by anyone who needs to edit text. It is quite a user-friendly tool. Its salient features include syntax highlighting with built in pattern, auto indent, tab emulation, block indentation adjustment etc. As of version 5.1, NEdit may be freely distributed under the terms of the GNU General Public License. MadEdit Free Mad Edit is an Open-Source and Cross-Platform Text/Hex Editor. It is written in C++ and wxWidgets. MadEdit can edit files in Text/Column/Hex modes. It also supports many useful functions, such as Syntax Highlighting, Word Wrap, Encoding for UTF8/16/32,and others. It also supports word count, which makes it quite a useful text editor for both windows and Linux. It has been recently modified on 10/09/2010. KompoZer Free Kompozer is a complete web authoring system that has a combination of web file management and easy-to-use WYSIWYG web page editing. KompoZer has been designed to be completely and extensively easy to use. It is thus an ideal tool for non-technical computer users who want to create an attractive, professional-looking web site without knowing HTML or web coding. It is based on the NVU source code. Vim Free Vim or “Vi IMproved” is an advanced text editor. Its salient features are syntax highlighting, word completion and it also has a huge amount of contributed content. Vim has several “modes” on offer for editing, which adds to the efficiency in editing. Thus it becomes a non-user-friendly application but it is also strength for its users. The normal mode binds alphanumeric keys to task-oriented commands. The visual mode highlights text. More tools for search & replace, defining functions, etc. are offered through command line mode. Vim comes with complete help. NotePad ++ Free One of the the best free text editor for Windows out there; with support for simple things—like syntax highlighting and folding—all the way up to FTP, Notepad++ should tick most of the boxes Notepad2 Free Notepad2 is also based on the Scintilla editing engine, but it’s much simpler than Notepad++. It bills itself as being fast, light-weight, and Notepad-like. Crimson Editor Free Crimson Editor has the ability to edit remote files, using a built-in FTP client; there’s also a spell checker. TotalEdit Free TotalEdit allows file comparison, RegEx search and replace, and has multiple options for file backup / versioning. For cleanup, it offers (X)HTML and XML customizable formatting, and a spell checker. In-Type Free ConTEXT Free SourceEdit Free SourceEdit includes features such as clipboard history, syntax highlighting and autocompletion for a decent set of languages. A hex editor and FTP client. RJ TextED Free RJ TextED supports integration with TopStyle Lite. Provides HTML validation and formatting. It includes an FTP client, a file browser, and a code browser, as well as a character map and support for email. GEDIT Free It is one of the best coda alternatives for windows and Linux. It has syntax highlighting and is best suitable for programming. It has many attractive features such as full support for UTF-8, undo/redo, and clipboard support, search and replace, configurable syntax highlighting for various languages and many more supportive features. It is extensible with plug ins. Other important coda alternatives for windows and Linux are Redcar, Bluefish Editor, NVU, Ruby Mine, Slick Edit, Geany, Editra, txt2html and CSSED. There are many more. Its up to user to decide which one suits best to his requirements. Related posts:10 Useful Text Editor For Developer Applications to Install & Run Windows on Linux Open Source WYSIWYG Text Editors

    Read the article

  • 6 Ways to Free Up Hard Drive Space Used by Windows System Files

    - by Chris Hoffman
    We’ve previously covered the standard ways to free up space on Windows. But if you have a small solid-state drive and really want more hard space, there are geekier ways to reclaim hard drive space. Not all of these tips are recommended — in fact, if you have more than enough hard drive space, following these tips may actually be a bad idea. There’s a tradeoff to changing all of these settings. Erase Windows Update Uninstall Files Windows allows you to uninstall patches you install from Windows Update. This is helpful if an update ever causes a problem — but how often do you need to uninstall an update, anyway? And will you really ever need to uninstall updates you’ve installed several years ago? These uninstall files are probably just wasting space on your hard drive. A recent update released for Windows 7 allows you to erase Windows Update files from the Windows Disk Cleanup tool. Open Disk Cleanup, click Clean up system files, check the Windows Update Cleanup option, and click OK. If you don’t see this option, run Windows Update and install the available updates. Remove the Recovery Partition Windows computers generally come with recovery partitions that allow you to reset your computer back to its factory default state without juggling discs. The recovery partition allows you to reinstall Windows or use the Refresh and Reset your PC features. These partitions take up a lot of space as they need to contain a complete system image. On Microsoft’s Surface Pro, the recovery partition takes up about 8-10 GB. On other computers, it may be even larger as it needs to contain all the bloatware the manufacturer included. Windows 8 makes it easy to copy the recovery partition to removable media and remove it from your hard drive. If you do this, you’ll need to insert the removable media whenever you want to refresh or reset your PC. On older Windows 7 computers, you could delete the recovery partition using a partition manager — but ensure you have recovery media ready if you ever need to install Windows. If you prefer to install Windows from scratch instead of using your manufacturer’s recovery partition, you can just insert a standard Window disc if you ever want to reinstall Windows. Disable the Hibernation File Windows creates a hidden hibernation file at C:\hiberfil.sys. Whenever you hibernate the computer, Windows saves the contents of your RAM to the hibernation file and shuts down the computer. When it boots up again, it reads the contents of the file into memory and restores your computer to the state it was in. As this file needs to contain much of the contents of your RAM, it’s 75% of the size of your installed RAM. If you have 12 GB of memory, that means this file takes about 9 GB of space. On a laptop, you probably don’t want to disable hibernation. However, if you have a desktop with a small solid-state drive, you may want to disable hibernation to recover the space. When you disable hibernation, Windows will delete the hibernation file. You can’t move this file off the system drive, as it needs to be on C:\ so Windows can read it at boot. Note that this file and the paging file are marked as “protected operating system files” and aren’t visible by default. Shrink the Paging File The Windows paging file, also known as the page file, is a file Windows uses if your computer’s available RAM ever fills up. Windows will then “page out” data to disk, ensuring there’s always available memory for applications — even if there isn’t enough physical RAM. The paging file is located at C:\pagefile.sys by default. You can shrink it or disable it if you’re really crunched for space, but we don’t recommend disabling it as that can cause problems if your computer ever needs some paging space. On our computer with 12 GB of RAM, the paging file takes up 12 GB of hard drive space by default. If you have a lot of RAM, you can certainly decrease the size — we’d probably be fine with 2 GB or even less. However, this depends on the programs you use and how much memory they require. The paging file can also be moved to another drive — for example, you could move it from a small SSD to a slower, larger hard drive. It will be slower if Windows ever needs to use the paging file, but it won’t use important SSD space. Configure System Restore Windows seems to use about 10 GB of hard drive space for “System Protection” by default. This space is used for System Restore snapshots, allowing you to restore previous versions of system files if you ever run into a system problem. If you need to free up space, you could reduce the amount of space allocated to system restore or even disable it entirely. Of course, if you disable it entirely, you’ll be unable to use system restore if you ever need it. You’d have to reinstall Windows, perform a Refresh or Reset, or fix any problems manually. Tweak Your Windows Installer Disc Want to really start stripping down Windows, ripping out components that are installed by default? You can do this with a tool designed for modifying Windows installer discs, such as WinReducer for Windows 8 or RT Se7en Lite for Windows 7. These tools allow you to create a customized installation disc, slipstreaming in updates and configuring default options. You can also use them to remove components from the Windows disc, shrinking the size of the resulting Windows installation. This isn’t recommended as you could cause problems with your Windows installation by removing important features. But it’s certainly an option if you want to make Windows as tiny as possible. Most Windows users can benefit from removing Windows Update uninstallation files, so it’s good to see that Microsoft finally gave Windows 7 users the ability to quickly and easily erase these files. However, if you have more than enough hard drive space, you should probably leave well enough alone and let Windows manage the rest of these settings on its own. Image Credit: Yutaka Tsutano on Flickr     

    Read the article

  • Looking into the JQuery Image Zoom Plugin

    - by nikolaosk
    I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client side of web development.  You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery Image Zoom Plugin.If you want you can have a look at this post, where I describe the JQuery Cycle Plugin.You can find another post of mine talking about the JQuery Carousel Lite Plugin here.I will be writing more posts regarding the most commonly used JQuery Plugins. I have been using extensively this plugin in my websites.You can use this plugin to move mouse around an image and see a zoomed in version of a portion of it. In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like. You can use Visual Studio 2012 Express edition. You can download it here.  You can download this plugin from this link I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5) <html lang="en">  <head>    <title>Liverpool Legends</title>        <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >        <link rel="stylesheet" type="text/css" href="style.css">        <script type="text/javascript" src="jquery-1.8.3.min.js"> </script>     <script type="text/javascript" src="jqzoom.pack.1.0.1.js"></script>        <script type="text/javascript">        $(function () {            $(".nicezoom").jqzoom();        });    </script>       </head>  <body>    <header>        <h1>Liverpool Legends</h1>    </header>        <div id="main">            <a href="championsofeurope-large.jpg" class="nicezoom" title="Champions">        <img src="championsofeurope.jpg"  title="Champions">    </a>          </div>            <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html>   This is a very simple markup. I have added one large and one small image (make sure you use your own when trying this example) I have added references to the JQuery library (current version is 1.8.3) and the JQuery Image Zoom Plugin. Then I add 2 images in the main div element.Note the class nicezoom inside the href element. The Javascript code that makes it all happen follows.    <script type="text/javascript">        $(function () {            $(".nicezoom").jqzoom();        });    </script>     It couldn't be any simpler than that. I view my simple in Internet Explorer 10 and it works as expected. I have tested this simple solution in all major browsers and it works fine.Inside the head section we can add another Javascript script utilising some more options regarding the zoom plugin.   <script type="text/javascript">            $(function () {        var options = {                  zoomType: 'standard',                  lens:true,                  preloadImages: true,                  alwaysOn:false,                  zoomWidth: 400,                  zoomHeight: 350,                  xOffset:190,                  yOffset:80,                  position:'right'                          };          $('.nicezoom').jqzoom(options);      });         </script> I would like to explain briefly what some of those options mean. zoomType - Other admitted option values are 'reverse','drag','innerzoom' zoomWidth - The popup window width showing the zoomed area zoomHeight - The popup window height showing the zoomed area xOffset - The popup window x offset from the small image.  yOffset - The popup window y offset from the small image.  position - The popup window position.Admitted values:'right' ,'left' ,'top' ,'bottom' preloadImages - if set to true,jqzoom will preload large images. You can test it yourself and see the results in your favorite browser. Hope it helps!!!

    Read the article

  • Looking into the JQuery Overlays Plugin

    - by nikolaosk
    I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client side of web development.  You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery Overlays Plugin.If you want you can have a look at this post, where I describe the JQuery Cycle Plugin.You can find another post of mine talking about the JQuery Carousel Lite Plugin here. Another post of mine regarding the JQuery Image Zoom Plugin can be found here.I will be writing more posts regarding the most commonly used JQuery Plugins. With the JQuery Overlays Plugin we can provide the user (overlay) with more information about an image when the user hovers over the image. I have been using extensively this plugin in my websites. In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like. You can use Visual Studio 2012 Express edition. You can download it here.  You can download this plugin from this link. I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5) <html lang="en"> <head>    <link rel="stylesheet" href="ImageOverlay.css" type="text/css" media="screen" />    <script type="text/javascript" src="jquery-1.8.3.min.js"></script>    <script type="text/javascript" src="jquery.ImageOverlay.min.js"></script>         <script type="text/javascript">        $(function () {            $("#Liverpool").ImageOverlay();        });    </script>   </head><body>    <ul id="Liverpool" class="image-overlay">        <li>            <a href="www.liverpoolfc.com">                <img alt="Liverpool" src="championsofeurope.jpg" />                <div class="caption">                    <h3>Liverpool Football club</h3>                    <p>The greatest club in the world</p>                </div>            </a>        </li>    </ul></body></html> This is a very simple markup. I have added references to the JQuery library (current version is 1.8.3) and the JQuery Overlays Plugin. Then I add 1 image in the element with "id=Liverpool". There is a caption class as well, where I place the text I want to show when the mouse hovers over the image. The caption class and the Liverpool id element are styled in the ImageOverlay.css file that can also be downloaded with the plugin.You can style the various elements of the html markup in the .css file. The Javascript code that makes it all happen follows.   <script type="text/javascript">        $(function () {            $("#Liverpool").ImageOverlay();        });    </script>        I am just calling the ImageOverlay function for the Liverpool ID element.The contents of ImageOverlay.css file follow .image-overlay { list-style: none; text-align: left; }.image-overlay li { display: inline; }.image-overlay a:link, .image-overlay a:visited, .image-overlay a:hover, .image-overlay a:active { text-decoration: none; }.image-overlay a:link img, .image-overlay a:visited img, .image-overlay a:hover img, .image-overlay a:active img { border: none; }.image-overlay a{    margin: 9px;    float: left;    background: #fff;    border: solid 2px;    overflow: hidden;    position: relative;}.image-overlay img{    position: absolute;    top: 0;    left: 0;    border: 0;}.image-overlay .caption{    float: left;    position: absolute;    background-color: #000;    width: 100%;    cursor: pointer;    /* The way to change overlay opacity is the follow properties. Opacity is a tricky issue due to        longtime IE abuse of it, so opacity is not offically supported - use at your own risk.         To play it safe, disable overlay opacity in IE. */    /* For Firefox/Opera/Safari/Chrome */    opacity: .8;    /* For IE 5-7 */    filter: progid:DXImageTransform.Microsoft.Alpha(Opacity=80);    /* For IE 8 */    -MS-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=80)";}.image-overlay .caption h1, .image-overlay .caption h2, .image-overlay .caption h3,.image-overlay .caption h4, .image-overlay .caption h5, .image-overlay .caption h6{    margin: 10px 0 10px 2px;    font-size: 26px;    font-weight: bold;    padding: 0 0 0 5px;    color:#92171a;}.image-overlay p{    text-indent: 0;    margin: 10px;    font-size: 1.2em;} It couldn't be any simpler than that. I view my simple page in Internet Explorer 10 and it works as expected. I have tested this simple solution in all major browsers and it works fine.Have a look at the picture below. You can test it yourself and see the results in your favorite browser. Hope it helps!!!

    Read the article

  • BugZilla XML RPC Interface

    - by Damo
    I am attempting to setup BugZilla to receive but reports from another system using the XML-RPC interface. BugZilla works fine on its own with its own interface. When I attempt to test the XML-RPC functionality by accessing "xmlrpc.cgi" in my browser I get the error: The XML-RPC Interface feature is not available in this Bugzilla at C:\BugZilla\xmlrpc.cgi line 27 main::BEGIN(...) called at C:\BugZilla\xmlrpc.cgi line 29 eval {...} called at C:\BugZilla\xmlrpc.cgi line 29 Following this I install test-taint package from the default perl repository, this installs version 1.04. Re-running "xmlrpc.cgi" gives me an IIS error: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. So I run the checksetup.pl which inform me that: Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Installing Test-Taint from CPAN is the same. I assume XML-RPC is relent on Test-Taint, but Test-Taint doesn't seem to run correctly. If I ignore this error and attempt to invoke "bz_webservice_demo.pl" to add an entry the script times out. How can I get the XML-RPC / Test-Taint function working ? Current Setup: IIS7.5 on Windows Server 2008 Bugzilla 4.2.2 Perl 5.14.2 C:\BugZilla>perl checksetup.pl Set up gcc environment - 3.4.5 (mingw-vista special r3) * This is Bugzilla 4.2.2 on perl 5.14.2 * Running on Win2008 Build 6002 (Service Pack 2) Checking perl modules... Checking for CGI.pm (v3.51) ok: found v3.59 Checking for Digest-SHA (any) ok: found v5.62 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.76 Checking for DateTime-TimeZone (v0.79) ok: found v1.48 Checking for DBI (v1.614) ok: found v1.622 Checking for Template-Toolkit (v2.22) ok: found v2.24 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.904) ok: found v1.911 Checking for URI (v1.37) ok: found v1.59 Checking for List-MoreUtils (v0.22) ok: found v0.33 Checking for Math-Random-ISAAC (v1.0.1) ok: found v1.004 Checking for Win32 (v0.35) ok: found v0.44 Checking for Win32-API (v0.55) ok: found v0.64 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.18.1 Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for DBD-SQLite (v1.29) ok: found v1.33 Checking for DBD-Oracle (v1.19) ok: found v1.30 The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.46 Checking for Chart (v2.1) ok: found v2.4.5 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for MIME-tools (v5.406) ok: found v5.503 Checking for libwww-perl (any) ok: found v6.02 Checking for XML-Twig (any) ok: found v3.41 Checking for PatchReader (v0.9.6) ok: found v0.9.6 Checking for perl-ldap (any) ok: found v0.44 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.20 Checking for SOAP-Lite (v0.712) ok: found v0.715 Checking for JSON-RPC (any) ok: found v0.96 Checking for JSON-XS (v2.0) ok: found v2.32 Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.67) ok: found v3.68 Checking for HTML-Scrubber (any) ok: found v0.09 Checking for Encode (v2.21) ok: found v2.44 Checking for Encode-Detect (any) not found Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found Checking for Apache-SizeLimit (v0.96) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * Encode-Detect * Automatic charset detection for text attachments * * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * * Apache-SizeLimit * mod_perl * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: Encode-Detect: ppm install Encode-Detect TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Apache-SizeLimit: ppm install Apache-SizeLimit Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for MySQL (v5.0.15) ok: found v5.5.27 WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. Removing existing compiled templates... Precompiling templates...done. checksetup.pl complete.

    Read the article

  • when importing multiple javascript files the javascript seems to break

    - by waywardmd
    I am trying to incorperate several different js files into one page. For some reason though whichever ones are first, seem to break. Here is the code I am using: <link href="inc/css/style.css" rel="stylesheet" type="text/css" /> <link rel="stylesheet" href="inc/css/lightbox.css" type="text/css" media="screen" /> <script type="text/javascript" src="inc/js/prototype.js"></script> <script type="text/javascript" src="inc/js/scriptaculous.js?load=effects"></script> <script type="text/javascript" src="inc/js/lightbox.js"></script> <script type="text/javascript"> <!-- function MM_swapImgRestore() { //v3.0 var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; } function MM_preloadImages() { //v3.0 var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array(); var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}} } function MM_findObj(n, d) { //v4.01 var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);} if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document); if(!x && d.getElementById) x=d.getElementById(n); return x; } function MM_swapImage() { //v3.0 var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];} } </script> <script type="text/javascript" src="inc/js/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="inc/js/jquery.slideshow.lite-0.4.js"></script> <script type="text/javascript" charset="utf-8"> $(document).ready(function(){ $("#slideshow2").slideshow({ pauseSeconds: 6, height: 196 }); }); </script> The first files are used for a lightbox and other functions and the second ones are used for a slideshow. Depending on the order one or the other will work, but never both at the same time. What am I doing wrong? Any help is greatly appreciated, thanks.

    Read the article

< Previous Page | 8 9 10 11 12 13 14  | Next Page >