Search Results

Search found 5885 results on 236 pages for 'finally'.

Page 120/236 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

  • Ubuntu 12.04 froze during update, won't boot

    - by Cichol
    I've recently installed Ubuntu 12.04 on my laptop, and every time i tried to update it, it would freeze for a few seconds, and tell me that the updates could not be downloaded. After many, many tries I managed to get them downloaded, but then in the middle of installing them, it froze. Completely. No mouse movement, no blinking lights, no nothing. After a few hours of letting it sit there, I finally hit the power button to do a hard reset, and now when I select Ubuntu on the boot screen (Dual-boot with Windows 7), I get a blank purple screen, and then nothing. Another freeze. I've tried getting into the console, but no command I input has any visible effect. I have a ton of music stored on the partition it's in, so I'd really rather not have to reinstall. My specs, to the best of my knowledge: Clevo Corp model B7130 (Sager custom) CPU: Intel Core i5 @ 2.53gHz (4 CPUs) Graphics Card: Nvidia GeForce 425m 4096 MB RAM Drivers: Whatever comes with the download of 12.04. As a side-note, I installed Ubuntu via the Windows Installer program (wubi). Does that make a difference?

    Read the article

  • W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

    - by Gary Kephart
    I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

    Read the article

  • Changing dual-monitor settings without closing the laptop lid on OS X

    - by hekevintran
    I have a Unibody MacBook hooked up to an external display. By default when I boot up, the system will go to dual-monitor mode. I want to use only the external display. The Apple supplied solution to this problem is to close the lid of the laptop which puts the machine into sleep mode and then move the mouse around to wake it up again. Because the machine is being woken up with the lid closed, when the displays are detected the system finds only the external. After the system is functional again, you can open the lid if you want and the laptop screen will be non-functional until you either tell the system to detect displays from the system preferences or you turn off the external display. Every time I want to use only the external display, I must reach my hand over to close the lid, wait for the machine to sleep, jigger the mouse, wait for the machine to wake up, and finally open the lid again because I don't want the machine to overheat. I feel that this is very stupid to have to do. Why is there no button or menu option that says "don't use this screen"? Is there any third-party software way to change the screen setup that does not involve physically closing the lid and playing a game of "are you sleeping" in order to switch such a simple software setting? We are in the 21st Century and honestly this is childish.

    Read the article

  • EC2: How dangerous is it to turn off fsck for EBS volumes?

    - by Janine
    I have been tearing my hair out trying to figure out why my EC2 instances (made from my own custom AMIs) were taking many tries to come up properly. They would fail with the following error: fsck.ext3: No such file or directory while trying to open /dev/sdf For both of the EBS volumes I was attaching during startup. Finally, I figured out the problem. I had put this in /etc/fstab: /dev/sdf /export ext3 defaults 1 2 /dev/sdi /export2 ext3 defaults 1 2 The 2 tells the system to fsck the drives on the way up. Changing this to /dev/sdf /export ext3 defaults 1 0 /dev/sdi /export2 ext3 defaults 1 0 Avoids the problem completely, but now the volumes are never going to be fsck'd. How much does this matter? Once the instance goes into production it's going to be running pretty much 24/7, so not many fscks would be happening anyway, but still... this just feels like a bad idea. I have not been able to find anyone else even reporting this problem (there are people with the same error message, but different causes). It seems unbelievable that I could be the only person to ever make this mistake, but perhaps I'm just talented that way. :) If there is another solution to the problem I would love to hear it; I have not been able to find one.

    Read the article

  • emacs error: "Symbol's value as variable is void: hostname"

    - by Florian Pilz
    After I installed emacs this error occurs every time on startup. It prevents me from installing plugins, e.g. auctex via aptitude. I already tried to install a plugin by hand (rails for ruby), but doesn't work. The error doesn't contain the message "hostname", but the hostname of my PC is displayed ("bloodredangel-ubuntu"). I changed my hostname to "bloodredangel", but the error message stays the same. While I changed my hostname I saw that in /etc/hostname were two entries: 127.0.0.1 bloodredangel-ubuntu I already asked this question in an ubuntu forum but they couldn't help. They recognised an misconfigured /etc/hosts file, which I corrected, but from time to time these incorrect configurations get attached by something. I didn't add them by hand, maybe it has something to do with the issue. The misconfigurations looked like this: 127.0.0.1 127.0.0.1 bloodredangel-ubuntu localhost.localdomain localhost 127.0.0.1 127.0.0.1:8080 bloodredangel-ubuntu localhost.localdomain localhost I didn't found a solution on the internet, so I hope I will find help here finally.

    Read the article

  • 500 error with deploying rails application via apache2+passenger

    - by user1633983
    I finally completed my own app, so the only work left is deploying the app. I'm using Ubuntu 10.04 and apache2(installed by apt-get), so I'm trying to deploy through passenger. I installed passenger gem like this: sudo gem install passenger rvmsudo passenger-install-apache2-module and I configured apache settings as what the installation message says. I added below lines in the middle of /etc/apache2/apache2.conf file. LoadModule passenger_module /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17/ext/apache2/mod_passenger.so PassengerRoot /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17 PassengerRuby /home/admin/.rvm/wrappers/ruby-1.9.3-p194/ruby and, I appended below lines in /etc/apache2/sites-available/default file. <VirtualHost *:80> ServerName localhost # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /home/admin/homepage/public <Directory /home/admin/homepage/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> But when I restart the apache service and hit the address, 500 error occurs. At first, it was same 500 error but the 500 error page is from apache's, but when I reinstalled the libapache2-module-passenger, the 500 error page is changed to that from rails'. Because of rails' 500 error page(which is located at public/500.html), I think passenger module is properly connected with apache. What should I do to fix this problem? Do I need to configure something inside my app before deployment?

    Read the article

  • cygwin sshd fails to allocate pty for some users

    - by user115851
    I have (finally) got sshd working under cygwin on Win7 - well, sort of. The sshd runs as user 'cyg_server'. I'm able to successfully ssh to my computer using that same user name. However, if I attempt to ssh using my normal (Windows) user name, it fails trying to allocate a pty for my login session. For example, output of 'sshd -D -d -d -d' contains this .. ... debug1: Entering interactive session for SSH2. debug2: fd 4 setting O_NONBLOCK debug2: fd 5 setting O_NONBLOCK debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug2: session_new: allocate (allocated 0 max 10) debug3: session_unused: session id 0 unused debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pty1 !!! chown(/dev/pty1, 17308, 10513) failed: Invalid argument debug1: do_cleanup debug1: session_pty_cleanup: session 0 release /dev/pty1 Currently /dev is owned by my normal account. I've tried changing its ownership to cyg_server as well as SYSTEM. In both cases the problem persists. I've also changed permissions for /dev (e.g, 700 and 777) - again problem persists. [As a side note - it is strange that whenever I do 'ls -al /dev' the ptys do not show up. However, if I 'ls -l /dev/ptyX' for a pty I know to exist, it shows up. Is that normal for cygwin?] -Bob Andover, MA

    Read the article

  • What does a status of "Backup" mean for Windows 7 local user profiles?

    - by Howiecamp
    Summary: Upon logging on to Windows 7 RTM I get a message that my profile can't be loaded and a temporary user profile is created. I logged off and back on as Administrator. The user profiles dialog shows my user profile with a Type of "Local" and a Status of "Backup" rather than "Local" which it should be. How can I change this to make my user profile accessible? The long story: My PC has a single hard drive partitioned into a C: and a D:. I'd moved my user profile directory (c:\Users) to d:\Users, removed c:\Users and then used mklink.exe to create a directory symbolic link c:\Users -- d:\Users. Worked like a charm since I did it. Today, I make a System Restore Point for drives C: and D:. Next, I dismounted D: and used the Disk Management tool to remove the "D:" drive letter from the D volume. (My plan was to reboot and then redirect the symbolic link.) Upon reboot, I got the user profile error described above. Finally, I restored the System Restore Points that I'd created for both drives and then rebooted again. Same issue.

    Read the article

  • Copying email with qmail and Plesk

    - by Greg
    I need to keep a copy of all outgoing and incoming email (for a single domain if possible) using qmail or Plesk. I can't recompile qmail, so qmailtap is out of the question, as is setting QUEUE_EXTRA in extra.h. I'm pretty sure it should be possible with Plesk's mailmng utility, aka Mail Handlers but I'm having trouble getting them to work. I've registered 2 hooks: incoming hook ./mailmng --add-handler --handler-name=incoming --recipient-domain=example.com --executable=/xxx/incoming.sh --context=/xxx/incoming/ --hook=before-local incoming.sh #!/bin/bash # The email is passed on stdin - grab it to a variable e=`cat -` # $1 = context (/xxx/incoming) # $3 = recipient ([email protected]) # Create /xxx/incoming/[email protected] mkdir -p $1$3 # Save the email to /xxx/incoming/[email protected]/0123456789.txt echo "$e" > $1$3/`date +%s%N`.txt # Echo PASS to stderr echo 'PASS' >&2 # Echo the email to stdout echo "$e" outgoing hook # ./mailmng --add-handler --handler-name=outgoing --sender-domain=holidaysplease.com --executable=/xxx/outgoing.sh --context=/xxx/outgoing/ --hook=before-remote The outgoing.sh file is the same as incoming.sh, except replace $3 (recipient) with $2 (sender). The incoming hook does work, but saves 2 copies of each email - one before and one after SpamAssassin has run. The outgoing hook doesn't seem to get called at all. So finally, my questions are: How can I make the incoming hook save only a single copy (preferably after SpamAssassin has run)? How can I get the outgoing hook to work?

    Read the article

  • Encryption setup for Linux NAS?

    - by Daniel
    There's a bazillion hard disk encryption HOWTOs, but somehow I can't find one that actually does what I want. Which is: I have a home NAS running Ubuntu, which is being accessed by a Linux and a Win XP client. (Hopefully MacOS X soon...) I want to setup encryption for home dirs on the NAS so that: It does not interfere with the boot process (since the NAS it tucked away in a cupboard), the home dirs should be accessible as a regular file system on the client(s) (e.g. via SMB), it is easy to use by 'normal' people, (so it does not require SSH-ing to the NAS, mount the encrypted partition on command line, then connecting via SMB, and finally umount the partition after being done. I can't explain that to my mom, or in fact to anyone.) does not store the encryption key the NAS itself, encrypts file meta-data and content (i.e. safe against the 'RIAA' attack, where an intruder should not be able to identify which songs are in your MP3 collection). What I hoped to do was use Samba + PAM. The idea was that on connecting to the SMB server, I'd have to enter the password on the client, which sends it to the server for authentication, which would use the password to mount the encrpytion partition, and would unmount it again when the session was closed. Turns out that doesn't really work, because SMB does not transmit the password in the plain and hence I can't configure PAM to use the incoming password to mount the encrypted patition. So... anything I'm overlooking? Is there any way in which I can use the password entered on the client (e.g. on SMB connect) to initiate mounting the encrypted dir on the server?

    Read the article

  • Ubuntu 12.04 compiz - disable all compiz plugin - empty screen

    - by gotqn
    A lots of thanks to terdon who spent so many time on this and finally solve the issue. A friend of mine has installed on my new machine Ubuntu 12.04 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

    Read the article

  • Unable to connect to CopSSH when running Windows service, works when running sshd directly

    - by Joe Enos
    I've been using CopSSH (that uses OpenSSH and Cygwin, so I don't know which of the three is the problem) as my SSH server application at home on Windows 7 Ultimate 32 bit. I have used it for about a year with no real problems, other than it sometimes takes 2 or 3 connection attempts to get through, but it's always worked within a few attempts. A few days ago, it just stopped working. The Windows service is still running, and I've rebooted, restarted the service, etc. with no change. On the client (using Putty on Windows), I get the message "Software caused connection abort". On the server, my event viewer registers the following: fatal: Write failed: Socket operation on non-socket I finally got it working, but only by executing sshd.exe directly from the command line on the server. No special flags or options, just straight execution, and then when I connect remotely, it goes through. I do have firewall and anti-virus software which appears to be configured properly, but the fact that things work when running sshd.exe also indicates that the firewall is fine. I thought the service and executable did exactly the same thing, but apparently there's some difference. Does anyone have any ideas on where I should look for the problem? If I can't find something, I suppose I can write a Windows service or scheduled task that fires off sshd.exe directly and ensures that it stays running, but that's kind of a last resort, since it's just wrapping around something that should already work. I appreciate your help.

    Read the article

  • Linksys router cannot change default password

    - by Jessica M.
    My wireless internet suddenly stopped working today. I have Windows 7 and Lindsys WRT54G router. I tried to log into the Linksys setup router page by typing in www.192.168.1.1 into firefox and it prompted me for a username and password as usual. The problem is when i tried to enter my regular username and password it did not work. I finally solved my problem when I came across this post here and the very last post solved my problem. It suggested I try username: root / password: admin. For some reason the username and password has been changed. When i tried username: root / password: admin , it worked and allowed me to get into the Linksys setup page. The problem is I can't change the username or password anymore. Every time I want to log into my Linksys setup page I have to enter username: root / password: admin. I can't change the "WPA shared key" (password). For the security settings I selected WPA2Personal + AES. Also the post said "If the firmware was upgraded to non-linksys firmware - the default will be different" . The problem is I didn't update anything and I'm worried that someone installed a virus or something or somehow changed the firmware on my router. How did I get non-Linksys firmware on my router? EDIT: I figured out how to change the password when I log into the Lynksys setup page. Administration -- Management -- password. I still don't understand if my router firmware was changed or who changed it or if it happened by mistake.

    Read the article

  • Unknown user in terminal

    - by Giles B
    Im having a strange problem with the terminal in OS X. When I open the terminal the username at the command prompt is: unknown-04-0c-ce-e3-0d-c2: ~ I can't pinpoint when this first started or why unfortunately. I usually use iTerm for web development purposes but this also occurs in the normal OS X Terminal app. Any ideas/help would be really appreciated. Thanks Update: Thanks to @fayadfami and @aliasgar for the correct answers and steering me in the right direction. Also this forum post helped http://forums.macrumors.com/showthread.php?t=152407 The extract from the right post: Having run into the exact same issue myself, and having come across this thread while attempting to figure it out, I thought I'd post the answer. OS X is initially setting your hostname to what's set for your Computer Name in Sharing; however, if you're set up for DHCP and you match a current lease on your DHCP server (i.e., match the IP address of another recent user), OS X will then set your hostname to whatever the DHCP server currently has for that lease. This freaked me out incredibly at first, as I had just reformatted (having just purchased my first Mac and wanting to see how the installer worked) and knew I had not yet changed the Computer Name in Sharing -- yet my system hostname at the Terminal prompt was indeed changed to what I had previously set, pre-format. I grepped around, not finding the name anywhere save log entries; I thought either the format didn't actually properly wipe everything, or I was losing my mind. Finally I logged into my router (it's a Linksys WRT54GS running OpenWRT), and found the hostname in the current leases file. I then manually set my Mac's IP to something different, and volia! -- the hostname was back to what I expected. I hope this helps save someone from the same paranoia I went through.

    Read the article

  • Ubuntu root privs installation issue

    - by Pam
    I am a fairly new Ubuntu user (and Linux user, for that matter) and I just downloaded a program whose installer was a .sh file. Not thinking, I copied the installer to an /opt subdirectory, thinking that I was going to install the application there: sudo cp ~/Downloads/fooInstaller.sh /opt/someDir I can't remember, but I either had to use sudo because /opt required it, or I just used it without thinking, but in any case, I prefixed with sudo. Once in /opt/someDir, I executed the installer again, using sudo: sudo sh fooInstaller.sh The terminal went crazy, and a few seconds later, a graphical install wizard popped up that guided me through the rest of the process. At the end of the wizard I was prompted to launch the program, and I did, and everything was great. Until... I closed the program, and attempted to add it to my Ubuntu "panel" (the icon panel at the top of the screen). The program was installed to /usr/local/foo/theProgram, and so I specified that URL as the command in the custom app launcher. When I open the program through the panel/launcher (at the top of the screen), the program doesn't load or operate correctly. I get a lot of error messages complaining about being denied permissions. I'm assuming that this is a "superuser/installation/privs" issue, and not a problem with the application (hence this post at superuser.com instead of the application's forums), because when I launch the program from the terminal with sudo, it opens and executes perfectly fine, just like it did the first time around after the install wizard finished. I realize I'm probably going to have to uninstall the program completely, and re-install it differently. Finally, my question: After uninstalling, can I avoid all these issue by just running the installer (sh fooInstaller.sh) right out of my Downloads directory, sans the sudo prefix? If not, how do I get the program to install without root privs so that I can add it to my panel/launcher and get it executing correctly? Sorry for the long post but I didn't want to omit any details because, as I'm sure you can tell, I'm not really sure I know what I'm doing. Thanks for any help here!

    Read the article

  • How can I fix my vista PCs screen resolution and refresh rate

    - by Antony Scott
    I have a media PC running media portal hooked up to my HDTV via HDMI. The TV is a couple of years old now, so only supports 1080i, which is 1920x1080@25Hz. I've got it connected to my PC via a HDMI compatible AV receiver. If I power up the amp (wait for it to boot fully) followed by the TV| and finally the PC, all is well and I get a picture. If I deviate from that sequence, or don't wait for the amp to book up fully, or even switch the amp to another video input (for example, my PS3). The PC sees this and defaults the screen resolution/refresh rate to 1920x1080@60Hz. So, I end up with a blank screen. To fix this I have to use UltraVNC from a PC and change the refresh rate back to 25Hz. So, is there a way to turn off that auto detection, or to manually define what resolution/refresh rates the monitor can do. I'm using the on-board Radeon 3200 video and do not have any of the AMD software installed as it seems to cause problems with video playback. So, I'm looking for a native vista fix, or possible some 3rd party software.

    Read the article

  • windows 8.1 does not boot after CHKDSK command

    - by sepehr
    I had problem with Windows 8.1 high Disk usage so in order to solve , searched forums. A voted answer suggested to use CHKDSK command as follow: run command prompt and as administrator type code snippet below: CHKDSK /f /v /b C: (I can not remember accurately) CHKDSK printed : can not run CHKDSK right now , would you like to schedule C drive to be checked next time windows starts? (Y/N) my response was "Y" ,please ! Following this suggestion not only didn't solve my problem as expected but also added another one ! The next time system booted, after windows authentication I just could see a black screen and mouse pointer. So I force shut downed the system and tried to start windows again. This time , windows got stuck in Scanning and Repairing on 22% for around 3 hours so I got tired and forced shut downed again. is CHKDSK source of Scanning and Repairing problem or they are discrete ? is there any hope to overcome this problem without re-installing windows ? can any one else run CHKDSK on newer versions of windows without problem? is CHKDSK effective but inefficient ?(it finally get to end but will take a long time) If yes, how much time does it take? I also have Linux Ubuntu 14.04 installed along side windows.

    Read the article

  • Routing a single request through multiple nginx backend apps

    - by Jonathan Oliver
    I wanted to get an idea if anything like the following scenario was possible: Nginx handles a request and routes it to some kind of authentication application where cookies and/or other kinds of security identifiers are interpreted and verified. The app perhaps makes a few additions to the request (appending authenticated headers). Failing authentication returns an HTTP 401. Nginx then takes the request and routes it through an authorization application which determines, based upon identity and the HTTP verb (put, delete, get, etc.) and URL in question, whether the actor/agent/user has permission to performed the intended action. Perhaps the authorization application modifies the request somewhat by appending another header, for example. Failing authorization returns 403. (Wash, rinse, repeat the proxy pattern for any number of services that want to participate in the request in some fashion.) Finally, Nginx routes the request into the actual application code where the request is inspected and the requested operations are executed according to the URL in question and where the identity of the user can be captured and understood by the application by looking at the altered HTTP request. Ideally, Nginx could do this natively or with a plugin. Any ideas? The alternative that I've considered is having Nginx hand off the initial request to the authentication application and then have this application proxy the request back through to Nginx (whether on the same box or another box). I know there are a number of applications frameworks (Django, RoR, etc.) that can do a lot of this stuff "in process", but I was trying to make things a little more generic and self contained where different applications could "hook" the HTTP pipeline of Nginx and then participate in, short circuit, and even modify the request accordingly. If Nginx can't do this, is anyone aware of other web servers that will perform in the manner described above?

    Read the article

  • The best LCD monitors for reading text?

    - by Xeoncross
    I have been using an 19" Acer AL1916A B for several years now. While possibly failing in other areas - the text was incredibly sharp. Which is very important for someone like me that spends all day writing code. My eyes are very finely tuned and I can see refresh rates and even the smallest pixel overflows from anti-aliasing. Unfortunately it finally died. I then tried a 19" widescreen Acer X193w+ and found that the text was much less sharp. I also tried a 19" widescreen Samsung 920nw and was also disappointed. (by the way, widescreen is a great invention for companies - the same price for less screen!). I am looking for a couple of options of LCD's that hands-down render text ultra sharp and clear. This isn't subjective - an LCD either has sharp text or it doesn't. Anyone with delicate eyes can see the difference and knows what I'm talking about. Please also bare in mind that you're vision can adjust to a given screen; rendering your judgment biased if you do not constantly use other monitors also. If you use windows with ClearType enabled please do not reply.

    Read the article

  • Primary zone will not transfer to secondary zone

    - by Matt Beckman
    Using DNS on Windows Server 2008, there is a constant struggle with adding primary and secondary zones. I will add a primary zone to NS1 for a new domain, edit it as needed, and when it's ready add the secondary zone to NS2. However, MOST of the time, the secondary zone remains in an error state, and will never acquire the primary zone data. I have gone back to domains a few weeks after adding them to find out that Windows never propagated the change. Annoying. Anyway, I recently updated SP1 to SP2 thinking this would help, but it hasn't. I added two new domains today, and spent an hour after the secondary zone would just not sync. During that time, the only error in the logs I had seen was for one of them where DNS complained about not being authoritative. In order to eventually resolve the issue, I ended up deleting the primary zone, creating a new primary zone, and hitting "Apply" after each and every field change. For example, after modifying the serial number from "1" to a date appropriate "2010093001", I hit apply, and then the Primary Server (apply), Responsible Person (apply), and finally Name Servers (apply). After I did this, the secondary zone didn't waste any time getting the data. Ideas?

    Read the article

  • OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

    - by sicn
    I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

    Read the article

  • Firefox is very slow when establish SSL sessions

    - by yanglei
    Using wireshark, I discovered that Firefox v3.0 gets stuck every time before "client key exchange, change cipher spec" stage when establishing a SSL session. Specifically, it takes 0.8~1.8 second before Firefox send "Client Key Exchange" request. This is unacceptable since our application is HTTPS only. I tested this on IE6 and IE8, both works well. Any clues? [Update] Finally, I found the reason of 1 ~ 2 seconds stuck by displaying all captured packets in Wireshark. After the "server hello" stage, Firefox makes a request to ocsp.verisign.com combined with an additional DNS lookup for that domain. Firefox must wait the revocation status from OCSP before entering the next stage of SSL. Depends on whether DNS cache is in effect, this process takes 1 ~ 2 seconds. A interesting observation is that the IP packet contains "client key exchange" has a high possibility to get lost and thus a TCP retransmission is necessary. When this happens, the process can take 3 seconds at worst. I'm not sure if this is a coincidence or a bug. Anyway, here is the result from Wireshark: (delta-time) 0.369296 src-ip dst-ip TCP [ACK] Seq=161 Ack=2741 Win=65340 Len=0 2.538835 src-ip dst-ip TLSv1 Client Key Exchange, Change Cipher Spec, Finished 2.987034 src-ip dst-ip TLSv1 [TCP Retransmission] Client Key Exchange, Change Cipher Spec, Finished The difference between Firefox and IE is this: Firefox 3 enables OCSP checking by default where as IE only supports it. So, there is no problem with both IE6 and IE8. This is indeed a "certificate revoke" problem. Thanks

    Read the article

  • Determining a realistic measure of requests per second for a web server

    - by Don
    I'm setting up a nginx stack and optimizing the configuration before going live. Running ab to stress test the machine, I was disappointed to see things topping out at 150 requests per second with a significant number of requests taking 1 second to return. Oddly, the machine itself wasn't even breathing hard. I finally thought to ping the box and saw ping times around 100-125 ms. (The machine, to my surprise, is across the country). So, it seems like network latency is dominating my testing. Running the same tests from a machine on the same network as the server (ping times < 1ms) and I see 5000 requests per second, which is more in-line with what I expected from the machine. But this got me thinking: How do I determine and report a "realistic" measure of requests per second for a web server? You always see claims about performance, but shouldn't network latency be taken into consideration? Sure I can serve 5000 request per second to a machine next to the server, but not to a machine across the country. If I have a lot of slow connections, they will eventually impact my server's performance, right? Or am I thinking about this all wrong? Forgive me if this is network engineering 101 stuff. I'm a developer by trade. Update: Edited for clarity.

    Read the article

  • Ubuntu: how to get audio to work in both Spotify (under Wine) and Flash (in Firefox)?

    - by Jonik
    I'm running Spotify on Linux using Wine. Sound worked great (even though the sound test in winecfg failed!), until I installed alsa-oss package yesterday to get Flash sound working in Firefox. Now Spotify says: "There is a problem with your sound card. Spotify can't play music." So the question is, how to get the sound in Spotify working again, so that it also keeps working in Flash & Firefox? Tweak some ALSA settings? Spotify settings? Add/remove some packages? By the way, curiously, now that sound doesn't work in Spotify, winecfg's "Test Sound" does work! This is Ubuntu 8.04 (Hardy). Sound card / driver is probably an integrated AC'97. Please mention if any additional information about the system is needed! Update: I have Flash 10 installed (outside the packaging system, using $MOZ_PLUGIN_PATH env variable), but also had Flash 9 from flashplugin-nonfree package - and the earlier version was being used by Firefox! Based on what Mike Arthur said about Flash and alsa-oss, I removed the older Flash (flashplugin-nonfree package) and alsa-oss - and Flash sound still works, which is nice. But for some reason Spotify still doesn't play sound, even though things should now be like they were originally... Update 2: Got it working, all smoothly, finally.

    Read the article

  • windows Home Server backup error

    - by domen
    I've finally built my WHS, but some other problems have showed up. I've googled, binged and searched SU with no success. The problem is following: at the moment I've got a Win7 laptop and Win7 PC, which should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to manually backup the PC, after "backup is starting" message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network. The only thing I've tried was reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is "DHCP server was not found". I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs). Any ideas what the problem can be? I can provide any additional information, I'm just not sure what may be helpful right now. Thanks.

    Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >