Search Results

Search found 4721 results on 189 pages for 'traffic'.

Page 121/189 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• accessing a web server from the LAN and WAN

  - by jessh

  My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• What would be the total expenses of running an in-home web server?

  - by techaddict

  I have several hosting accounts with companies, and plan to keep them. However, I would like to try my hand at creating my own home web-server, both for fun and for the learning experience. I would like to know the expenses involved, including: electricity costs (greater than light bulb?) internet costs (will I have to upgrade my internet? Or is 3-5Mbps upload speed fine for a web server with medium amount of traffic? Would I have to get a separate internet connection?) other unknown expenses Consider that I will configure the web server myself, so that is not an expense. Also consider that I already have a computer (year-old Dell laptop, 15R) to use to be dedicated as the web server.

  Read the article

• Run Logstalgia on Remote Global Apache Log On a WHM System

  - by macinjosh

  I work for a small web development shop. We have a dedicated Linux server running WHM. For fun we want to run Logstalgia on a machine in our office. We'd really like it to display information about all the traffic on our server. Logstalgia use Apache's access logs to generate its visuals, the problem I have is that by default WHM does not have an access log for all sites combined. How can I safely configure our server to output a combined/global Apache access log in a place accessible by a non-root SSH user? I am also concerned that this file could get quite large so I think I'd also need to know how to have it automatically shed old information. To make things more interesting I'm a programmer not a sys admin so not everything is immediately obvious to me.

  Read the article

• Munin Aggregated Graphs Configuration Error

  - by Sparsh Gupta

  I tried making some Munin Aggregated graphs but somehow I am unable to make the configuration work. I think I have followed the instructions but since its not working, I would love some assistance or guidance as to what I am doing wrong. I want to Aggregate (sum) the total number of requests / second all my nginx servers are doing combined together. The configuration looks like [TRAFFIC.AGGREGATED] update no requests.graph_title nGinx requests requests.graph_vlabel nGinx requests per second requests.draw LINE2 requests.graph_args --base 1000 requests.graph_category nginx requests.label req/sec requests.type DERIVE requests.min 0 requests.graph_order output requests.output.sum \ lb1.visualwebsiteoptimizer.com:nginx_request_lb1.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb2.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb3.visualwebsiteoptimizer.com_request.request The munin graph I want to aggregate is http://exchange.munin-monitoring.org/plugins/nginx_request/details Thanks Sparsh Gupta

  Read the article

• Stripping a spike from rrdtool when removespike.pl doesn't find any

  - by raccettura

  I know when rrdtool graphs (using rrdtool 1.4) network traffic and the host is restarted a spike is a pretty normal thing to see. In the past I've just run that removespike.pl script that is hosted by the author and it strips the spike and I'm good to go. The last few times I've rebooted removespike.pl finds no spikes, but it's obvious that there are spikes. So my question is, how can I easily remove these spikes and get my graphs usable again? Right now it's so skewed it's meaningless.

  Read the article

• ISA Server Route Add Question

  - by Kip

  Hi All, I have a situation where I have and ISA 2006 server (on Win2k3) that has an internal and an externaly facing NIC's. All works fine but I need to add a couple of routes for the following reason: Our monitoring software is on a different network. Our Terminal server is on a different network. Currently, access to the internet, through this proxy server, from the terminal server fails. Also, monitoring of the ISA server via a remote monitor or the installed agent talking to the remote monitor (BMC) also fails. The default enterprise rule on ISA blocks the traffic as I beleive it doesn't trust / know about those networks. Here is my routing table: I need to add a couple of address, but this one being the main one: 192.168.245.137 / mask 255.255.255.192 / gateway 192.168.245.129 But I can't get it to work. Routing is not my strong point but at the moment have no one else available to help. Can you offer any assistance? Please ask if you need more info

  Read the article

• Apache service hung and incoming requests not accepted

  - by Gnanam

  Hi, My production server is running Apache v2.2.4 with mod_mono v1.2.4 on CentOS release 5.2 (Final). Suddenly, Apache service hung during normal usage time (approx. 1 pm EDT). Traffic is not too high at this time. This is the first time we're noticing this kind of behaviour in our server. I noticed from access log that even subsequent requests are also not received, even though there were incoming requests. I then manually tried to invoke my application call from web browser, it never returned successfully but it was still loading. I found no unusual behaviour/activity in: 1) Apache access_log and error_log 2) No kernel level errors found in /var/log/messages I've no other option but ended up restarting Apache service. Any idea on what would cause Apache to hang and thereby not allowing subsequent incoming requests? How do I debug/diagnose when this happens next time? Experts advice/recommendation on this are highly appreciated.

  Read the article

• What advantages does mod_evasive have over mod_security2 in terms of DDOS protection?

  - by Martynas Sušinskas

  Good day, I'm running an Apache2 server in front of a Tomcat and I need to implement a DDOS protection mechanism on the Apache2 layer. I have two candidates: mod_evasive and mod_security2 with the OWASP core rule set. Mod_security is already installed for overall protection, but the question is: is it worth adding mod_evasive besides mod_security just for the DDOS (does it have any major advantages) or the OWASP crs rules in the /experimental_rules/ directory (modsecurity_crs_11_dos_protection.conf) provide the same protection? Or it's just a matter of preference? The sites are not very high traffic normally. Thank you for your answers, Martynas

  Read the article

• My uncle is the family historian. We need to host about 5-15 TB of images and video. Any inexpensive

  - by Citizen

  Basically we have hq scans of thousands of old family photos. Plus tons of family video. We want to host them where we can still have total control over the content and restrict access. I'm a php programmer, so the security is not an issue. What is an issue is finding a host to store 10 TB of data and not be paying a ton of money. We really are not planning on a lot of traffic. Maybe 1-10 visitors a day; family only. Kind of like an online library.

  Read the article

• Internal USB A Female to motherboard 4-pin that mounts internally

  - by rockinthesixstring

  I'm wondering if anyone knows of a product like this but that is physically mountable internally rather than on a cable? I'm planning on building a super low profile "gateway" pc that is dedicated to handling internet traffic in my home. I have a great 1U rackmountable chassis for an ITX motherboard, but I need the hard drive real estate for the additional NIC required to run a gateway (one onboard and one PCI). So the plan is to use a small 8GB USB Jump Drive for the OS inside the box (as to not have one hanging out the back. And although it's racked, I still don't want the jump drive flopping around internally, so I want it fixed somehow. I have an alternative idea where by I use a flush mount zap strap saddle and a zip tie to hold it in place, but that seems kind of like a hack.

  Read the article

• Network Configuration

  - by Dario

  Hello, This is my situation: Router A: IP 192.168.1.1 Mask 192.168.1.0/24 - Connected to the internet. Server: - Interface eth0: inet addr:10.1.1.125 Mask:255.255.255.0 (connected to router B) - Interface ra0: inet addr:192.168.1.125 Mask:255.255.255.0 (connected to router A) Router B: IP 10.1.1.254 Mask 10.1.1.0/24 - Connected to Server's eth0 Computer: connected to Router B via WiFi connection. I configured a static route on Router B that use as default gateway 192.168.1.125 and i can ping that ip from computer. The problem is: how i can connect to the internet ? In other words, traffic coming from Server eth0 should use ra0 as gateway. Any suggestion ? Thank you

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives? Any help/suggestions much appreciated. Neil

  Read the article

• Round-Robin DNS in mobile networks

  - by k7k0

  After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

  Read the article

• Remote site AD design (2003)

  - by Boy Mars

  A remote site has about 25 of our 50-ish employees. They have their own AD domain presently (2003) but I want to look at getting them onto the same global domain for ease of access/administration. The remote site has a VPN link but line speeds are very poor. I am already aware of tools like ADMT and have done a few migrations in the past (NT/2003 domains), but this is the first time I have the luxury of designing how this domain is organised. So I'm looking for tips on good AD design; would a remote site be better served as a sub-domain? would this reduce traffic? I am only currently looking at 2003 since only existing machine will be used.

  Read the article

• Rsyslog mail module not working

  - by Henry-Nicolas Tourneur

  I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

  Read the article

• Connecting a network drive only when the VPN is connected?

  - by leeand00

  I have a thumb drive that I want to be able to connect to the same place over the network at one location as it is locally. Sometimes I leave it at the other location, but usually if I'm going to back it up, I back it up locally for network traffic. Is there a way to automatically connect the thumb drive when I connect to the VPN? (Always to the same drive letter...and obviously skip connecting it if it's already plugged in locally and the VPN is connected...) I'm using a Cisco VPN Client 5.x

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• Linux router and firewall with IP accounting

  - by Andrew

  I'm working on a project to replace my organisation's aging Slackware gateway/router/firewall machine in our colo rack. Previously we used rc.firewall but we are now looking for something more modern and easily configurable. The requirements are: Act as a gateway router & firewall Port forwarding to a Terminal Server in the colo IP/traffic accounting, preferably accessible via SNMP (already using cacti for other servers) Possibility of acting as a PPTP server & routing these connections Is not an out-of-the-box Cisco product (don't have the finances or support to maintain it) I'd prefer to use Ubuntu or some other Debian-based distro but something that integrates everything we're looking for is certainly an option if it offers all the desired features and is easy to configure. Is there a simple set of packages that will provide me with the Firewall & Accounting features, or am I best served with a custom-built distro / other solution?

  Read the article

• Rails deployment questions

  - by Meltemi

  Getting ready to deploy a rails project on Mac OS X Server (10.5 - Leopard). Got a few questions for someone with Rails experience: where should directory containing the project go? inside the website's root folder or out? who should "own" that directory? www? root? something/someone else? hope to continue serving static pages via Apache... would like rails app to be served by mydomain/xxx/railsapp. is there a standard name people us for 'xxx'? not expecting too much traffic to begin with...just like to keep things as simple as possible.

  Read the article

• Cannot access Application configured on local IIS 7 using IP/machine name

  - by SilverHorse

  I have a windows 7 machine 64 bit and IIS 7 I have a default website on the IIS.Its binding is {IP: All Unassigned , Port:80 , Host Name : blank} I have added a new asp.net application to that website,mapped physical path, have set the virtual path as "MyWebApp". Application pool for "MyWebApp" is "DefaultAppPool" {.Net Framework: 4.0 ; Managed Pipeline Mode: Classic} The problem I am facing is I can access the website using http://localhost, http://IP.IP.IP.IP and http://MyMachineName But I can not access the Application other than using http://localhost/MyWebApp What should I do if I want to access the webapp using http://MyMachineName/MyWebApp OR http://IP.IP.IP.IP/MyWebApp Please note : I have already created an inbound rule to allow all HTTP traffic for port 80 in firewall settings.

  Read the article

• Is there any SMS/MMS server for LAN environment

  - by Chau Chee Yang

  I am looking for a solution to send SMS/MMS message to mobile device from desktop or browser in LAN environment. As such, it is most probably using TCP/IP protocol to transmit request/response. The server may attach to a GSM device with SIM card attached. An server application would then start accept the request from any LAN client and convey the SMS/MMS to one or more recipients. The server may log all requests for further traffic analysis in later stage. Is there any solution that able to perform what I describe here. Please advice.

  Read the article

• SSL Proxy: Forwarding without the encryption

  - by John

  I have a python application listening on port 9001 for HTTP traffic. I'm trying to configure Apache (or anything, really) to listen on port 443 for HTTPS connections, and then forward the connection, sans encryption, to port 9001 on the same machine. My application would then reply via the proxy, where the encryption would be reapplied, and returned to the client transparently. I'm not doing anything crazy with the site names and SSL certs, I have one public IP, one hostname, and one SSL cert. Stripping the encryption at the proxy doesn't seem to be a common requirement. Is what I'm asking for a normal requirement? Are there other concerns with this sort of configuration?

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• Reputable web based ssh client? [closed]

  - by Doug T.

  I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >