Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 124/235 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

  - by BraeburnDev

  I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

  Read the article

• How to Compare version of printing drivers ?

  - by asksuperuser

  I have two different results for printing on 2 different computers with windows xps driver (http://www.microsoft.com/whdc/xps/viewxps.mspx). I'd like to know which version each one uses but there's no information of that kind in properties window so how to get them ?

  Read the article

• Legacy VB6 application under Win7 SQL error

  - by Shial

  We have a rather unfortunate legacy application at work, written originally in VB6 it predates anybody in our IT department by at least 5 years. We have a contracted developer for ongoing maintenance and where he can he rewrites sections over into .NET code (Not sure about his techniques here, this is a side job for his regular work as an IBM engineer) the application works fine (such as it is) under windows XP. We have only a couple of Windows 7 machines mainly for testing and this application seems to run into a wall. Things like the background not loading and SQL errors. This is even running under administrator. Running an SQL trace from the ODBC control panel shows several interesting things. It makes a connection to the database successfully initially where it runs a query to determine if it is running the correct version. This query works fine. 558-1af0 ENTER SQLExecDirectW HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 BMS 558-1af0 EXIT SQLExecDirectW with return code 1 (SQL_SUCCESS_WITH_INFO) HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 It then seems to drop its connection and can't find the ODBC connection despite the fact its connecting to the same DB. From the trace it looks like it configures the connection then it starts firing off SQLFreeStmt to unbind and close out then when in the application and it tries to do its thing there is no connection. 558-1af0 ENTER SQLFreeStmt HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> BMS 558-1af0 EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS) HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> Then this happens when I try to do something that pulls data 558-1af0 ENTER SQLDriverConnectW HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> BMS 558-1af0 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR) HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> DIAG [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (0) Nearly all of my searching on this issue comes up with programming issues where the connection string has a problem. The only thing that is different in this particular scenario though is Windows 7, I know the connection string is fine since it works on the XP machines. The VB components are supposed to be still functional under Win7. My computer is running 32 bit win7 and my VP is running Win7 64 bit and both have the same problem so that can be ruled out. I have already tried reinstalling the SQL Native Client and the VB runtime as well as the application in question. Hopefully I can find a solution and not have to resort to using the XP VM.

  Read the article

• How to get Tenda W322U V2.0 Wireless adapter running on Windows 7?

  - by dircowander

  My Tenda W322U V2.0 Wireless USB Adapter used to work with Ralink drivers and I can't make it work on the new Windows 7. Every time the network adapter is booted, it keeps looking for a driver update and after updating, no wireless connection shows in the launcher in the panel. I was wondering whether the adaptor uses the Ralink chipset at all. Is there a version available with a wider choice of drivers?

  Read the article

• TTY with 256 colors?

  - by timn

  With URxvt and xterm it is possible to use a virtual terminal supporting 256 colors instead of only eight. Since my Intel GMA graphics card is well-supported by the KMS framebuffer driver, I am exclusively working on the TTY. Unfortunately it only supports eight colors although with MPlayer (-vo fbdev/fbdev2) and other framebuffer tools far more can be addressed. Is there a way to tell the TTY to use more than eight colors?

  Read the article

• apcupsd on Linux does not report on APC BackUPS Pro 900

  - by lserni

  From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

  Read the article

• How to make the PC speaker beep from the Windows 7 command prompt?

  - by oKtosiTe

  I'm running some lengthy video encodes using the Handbrake command line interface. After all my encodes are done, I would like to have the PC speaker beep, as I usually turn my large external speakers off. On Linux I would install the "beep" package, but so far I haven't found such a program for Windows 7. Possibly related links: System "Beep" sound does not function in Windows Vista x64 with HD Audio devices (I am indeed using an HD Audio device: the SoundMAX ADI1986A) What’s up with the Beep driver in Windows 7?

  Read the article

• Windows 3.11 on ESXi4 - network not working

  - by Gabor Garami

  I migrated a VM running Windows 3.11 for Workgroups from VMware Workstation to ESXi 4.0U1 and the networking inside the guest machine has stopped working. I reinstalled the network card driver, and changed the VM to use a static IP but it doesn't help. Pls help me.

  Read the article

• Virtual Microphone and skype

  - by Dario

  I need to have at least one microphone on Windows to make Skype calls, but i have a VPS with Windows 2003 server with no audio device. I googled a lot and finally i found something called "Virtual Audio Cable", a tool to install virtual audio drivers ( http://software.muzychenko.net/eng/vac.html ). I tried many times but i couldn't get this driver work, so i'm asking if someone know a similar solution, i mean a virtual microphone or a way to make skype working without any microphone. Thanks all!

  Read the article

• Office scanner recommendation

  - by rodey

  We need to buy a scanner for a user in our company would be be considered a light-to-moderate scanner. The main requirements is a TWAIN/Kofax driver, MUST have a ADF, does not need a flat bed and is in the $500-600 range, at most $1000. What 'cha got?

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• Windows Server 2008 Black Screen on boot

  - by Mark Milford

  Hi I have a windows server 2008 running in Parrallels (on Mac osx)... the mac crashed yesterday and so I hard rebooted it, when I fired up the Windows Server 2008 VM this morning it goes as far as the progress bar then goes black screen and does nothing else (even when left for a long time). I can boot into safe mode, Event Viewer says: "The following boot-start or system-start driver(s) failed to load: spldr stoflt" Any ideas? What should I do next?

  Read the article

• Scanning for new disks attached using virtio?

  - by larsks

  I can successfully attach disks to a running KVM instance using virsh attach-disk... virsh attach-disk node-1 /dev/vg_lunsr/lun1 vdb Disk attached successfully ...but these new devices aren't seen by the guest without a reboot, which almost defeats the purpose of dynamic attachment. If these were SCSI devices I would use e.g. /sys/class/scsi_host/host0/scan to request the SCSI drivers to scan for new devices. Is there an equivalent capability for the virtio block driver?

  Read the article

• Automatically run a script or a program on wake from standby in Windows 7

  - by karatchov

  I have a buggy driver for my Wifi USB dongle. Every time the computer wakes from standby, the wifi is disabled. I created a script to restart the device, but I have no idea how to automatically run it when wake from standby. I'm using Widnows 7 x64.

  Read the article

• Troubleshooting a network card on linux. Connected to network, given access point, no connection?

  - by Chris

  I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

  Read the article

• SQL Server 2000 Client won't connect

  - by alimack

  One day instead of connecting to the database my SQL Server Management gave me the following error: "Data Source name not found & no default driver found" Note it had been working for several years before this, all that had changed was an upgrade to Office (97 -2000) and the monthly Windows patches. I tried rebooting, re-installing both the SQL Server 2000 and 2005 clients on the machine but no joy. I can access the database(s) from other machines.

  Read the article

• refresh screen rate ubuntu

  - by user24224

  Hello all I am having problems with the refresh rate if the screen . In the the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870. And already installed the ati driver via ubuntu download centre. Any idea how i solve that one ? Thanks.

  Read the article

• How to set up linux watchdog daemon with Intel 6300esb

  - by ACiD GRiM

  I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

  Read the article

• Broadcom 440x Ethernet NIC Drivers and Windows Home Server

  - by scottman666

  I have installed Windows Home Server on an older Dell computer, and it uses a Broadcom 440x Ethernet NIC driver. I have tried all of the drivers listed on their drivers page to no luck. The error message I get when trying to install is: "The parameter is incorrect" I know it is a long shot, but anybody have any suggestions? Thanks!

  Read the article

• ffmpeg video4linux2 at specified resolution

  - by wim

  When I'm trying to record a clip from my webcam, using: ffmpeg -f video4linux2 -s 640x480 -i /dev/video0 /tmp/spam.avi I get annoying problem with very low resolution video, and there is a message from ffmpeg saying: [video4linux2,v4l2 @ 0x2bff3e0] The V4L2 driver changed the video from 800x600 to 176x144 I have tried not specifying -s, or trying other sizes like 800x600, and always it forces me back to 176x144. Why is this and how can I prevent it? My webcam is one of those Logitech 9000 Pro, I know it supports better resolutions than this and I can see with v4l2-ctl --list-formats-ext that it goes up to at least 800x600. edit: complete console output follows wim@wim-desktop:~$ ffmpeg -f video4linux2 -s 640x480 -i /dev/video0 /tmp/spam.avi ffmpeg version git-2012-11-20-70c0f13 Copyright (c) 2000-2012 the FFmpeg developers built on Nov 21 2012 00:09:36 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --enable-gpl --enable-libfaac --enable-libfdk-aac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-x11grab --enable-libx264 --enable-nonfree --enable-version3 libavutil 52. 8.100 / 52. 8.100 libavcodec 54. 73.100 / 54. 73.100 libavformat 54. 37.100 / 54. 37.100 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 23.101 / 3. 23.101 libswscale 2. 1.102 / 2. 1.102 libswresample 0. 17.100 / 0. 17.100 libpostproc 52. 2.100 / 52. 2.100 [video4linux2,v4l2 @ 0x37a33e0] The V4L2 driver changed the video from 640x480 to 176x144 [video4linux2,v4l2 @ 0x37a33e0] Estimating duration from bitrate, this may be inaccurate Input #0, video4linux2,v4l2, from '/dev/video0': Duration: N/A, start: 37066.740548, bitrate: 6082 kb/s Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 176x144, 6082 kb/s, 15 tbr, 1000k tbn, 15 tbc File '/tmp/spam.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to '/tmp/spam.avi': Metadata: ISFT : Lavf54.37.100 Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 176x144, q=2-31, 200 kb/s, 15 tbn, 15 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> mpeg4) Press [q] to stop, [?] for help frame= 95 fps= 22 q=2.0 Lsize= 88kB time=00:00:13.86 bitrate= 51.8kbits/s video:77kB audio:0kB subtitle:0 global headers:0kB muxing overhead 13.553706%

  Read the article

• How do I use HP webcam in ubuntu ?

  - by Omkant

  I bought hp-notebook pc in which there was windows vista and webcam was properly working but now I have put ubuntu in my laptop and I want to use my webcam for video-chatting and general video recording and snapshots . Please advise me how should I use my webcam using any driver or software or package?

  Read the article

• win7: software raid for several hds which retains files on each HD?

  - by Fuxi

  hi, is there some kind of software/driver which enables to create one big volume out of several hard disks but retains file structure on each HD? (in case one hd crashes only data on that hd will be lost). win7 enables me to do that but in case one hd breaks all data will be lost. thx

  Read the article

• How to print a rendered website to pdf or vector graphics?

  - by Lo Sauer

  This is a crucial question to many: Searching the web, I have found several command line tools that allow you to convert a HTML-document to a PDF-document, however they all seem to use their own, and rather incomplete rendering engine, resulting in poor quality How can you print the rendered output of a modern web-browser to pdf, (and/or svg) whilst retaining as much vector graphics as possible? There is a solution called: webkit-pdf (which renders everything to bitmap graphics) I am looking for options, alternatives, suggestions perhaps even a printer-driver or webservices? Thanks

  Read the article

• What is the registry key for 'Enhanced Pointer Precision' option in the Mouse Properties

  - by detj

  I use a Razer mouse at work, and though the mouse is supercool, it's driver always removes the 'Enhanced Pointer Precision' option from the Pointer Options tab found in the Mouse Properties of Control Panel on startup. If I could find the correct registry setting to set this option 'on' whenever Windows starts, it would solve my problem. I've tried finding the correct key using Process Monitor, I didn't get success. Anyone know the key??

  Read the article

• acer laptop 5532 series

  - by Michelle

  I am trying to access my home wireless internet and the troubleshooting screen says microsoft virtual wifi miniport adapter has a driver problem. What does this mean??

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >