Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 13/778 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Windows XP detecting printer as USB hub - how to start again without reinstalling XP?

    - by Umber Ferrule
    Fresh install of Windows XP SP3. No system restore. Didn't install USB printer drivers before connected it to PC. Mistakenly allowed XP to auto install some driver which turned out to be a USB hub(!). Now I can't get XP to see the printer as a printer. Have tried uninstalling the offending driver in Device Manager and rebooting but it keeps being detected as a USB hub. How do I revert XP back to a pristine, unsullied USB state so it doesn't know about the USB hub and will (hopefully) install the printer as a printer?

    Read the article

  • Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

    - by user33521
    We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

    Read the article

  • Change Scan-to-PC list names on Brother MFC-8890DW Printer

    - by dralezero
    I have two Brother MFC-8890DW. When scanning over the network, it shows a list of PCs (on the scanner display) to save to that have the software/drivers installed. Each PC is listed as the name of the employee for that computer. I have setup a third MFC-8890DW and installed on these computers. The list, however, is the computer name. Somehow it is possible to customize the name. Brother support did not know. I couldn't find anything in manuals. I thought I remember setting up those names before.

    Read the article

  • Problem with Windows Service and network printers.

    - by Mohammadreza
    I have a Windows Service application that every now and then should print some documents. As far as I know, to print those documents, my service must be run with a user account other than Local Service or Network Service. So i have created a user account and added that to the Administrators group and ran the service with it. With locally installed printers, I don't have any problems because those printers are automatically installed for all accounts. To be able to print with the network printers, I have created another application that syncs the installed printers of the currently logged in user with the user account that my service uses with the rundll32.exe printui.dll,PrintUIEntry command. In Vista and Windows7 I don't have any problems with the syncing of the printers because every time that a printer should be installed the authentication window will open and it asks for the appropriate user account to install that printer (The service user account is not created on the network printers computers) but in XP a find dialog with the "Connecting to {printername}" caption will appear and stops responding, or sometimes it installs the printer but every time service tries to print, a Win32Exception with "A StartDocPrinter call was not issued" message will throw and in the user account that runs the sync application a duplicate printer will be shown and I couldn't delete those printers unless with force (using registry). Am I doing the right thing for printing documents with Windows Services at all? If yes, how can I solve the above-mentioned problem? And if not, what the heck should I do? Thanks.

    Read the article

  • LDAP over SSL with an EFI Fiery printer

    - by austinian
    I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

    Read the article

  • Resilient backpropagation neural network - question about gradient

    - by Raf
    Hello Guys, First I want to say that I'm really new to neural networks and I don't understand it very good ;) I've made my first C# implementation of the backpropagation neural network. I've tested it using XOR and it looks it work. Now I would like change my implementation to use resilient backpropagation (Rprop - http://en.wikipedia.org/wiki/Rprop). The definition says: "Rprop takes into account only the sign of the partial derivative over all patterns (not the magnitude), and acts independently on each "weight". Could somebody tell me what partial derivative over all patterns is? And how should I compute this partial derivative for a neuron in hidden layer. Thanks a lot UPDATE: My implementation base on this Java code: www_.dia.fi.upm.es/~jamartin/downloads/bpnn.java My backPropagate method looks like this: public double backPropagate(double[] targets) { double error, change; // calculate error terms for output double[] output_deltas = new double[outputsNumber]; for (int k = 0; k < outputsNumber; k++) { error = targets[k] - activationsOutputs[k]; output_deltas[k] = Dsigmoid(activationsOutputs[k]) * error; } // calculate error terms for hidden double[] hidden_deltas = new double[hiddenNumber]; for (int j = 0; j < hiddenNumber; j++) { error = 0.0; for (int k = 0; k < outputsNumber; k++) { error = error + output_deltas[k] * weightsOutputs[j, k]; } hidden_deltas[j] = Dsigmoid(activationsHidden[j]) * error; } //update output weights for (int j = 0; j < hiddenNumber; j++) { for (int k = 0; k < outputsNumber; k++) { change = output_deltas[k] * activationsHidden[j]; weightsOutputs[j, k] = weightsOutputs[j, k] + learningRate * change + momentumFactor * lastChangeWeightsForMomentumOutpus[j, k]; lastChangeWeightsForMomentumOutpus[j, k] = change; } } // update input weights for (int i = 0; i < inputsNumber; i++) { for (int j = 0; j < hiddenNumber; j++) { change = hidden_deltas[j] * activationsInputs[i]; weightsInputs[i, j] = weightsInputs[i, j] + learningRate * change + momentumFactor * lastChangeWeightsForMomentumInputs[i, j]; lastChangeWeightsForMomentumInputs[i, j] = change; } } // calculate error error = 0.0; for (int k = 0; k < outputsNumber; k++) { error = error + 0.5 * (targets[k] - activationsOutputs[k]) * (targets[k] - activationsOutputs[k]); } return error; } So can I use change = hidden_deltas[j] * activationsInputs[i] variable as a gradient (partial derivative) for checking the sing?

    Read the article

  • Printer State: Idle - /usr/lib/cups/backend/dnssd failed

    - by bilbo88
    A printer was installed and worked but does not now. A job is successfully submitted, but keeps waiting there for printing (as seen from lpq command). Ping to printer works fine. (The printer is on and works as it prints from Windows.) But on the Printer Property, it shows Printer State: Idle - /usr/lib/cups/backend/dnssd failed. The following command does not help either. sudo service avahi-daemon restart Does any one has a solution? Thank you for help.

    Read the article

  • Printing to a printer connected to a wireless router

    - by mspencer
    I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

    Read the article

  • Canon Pixma MP150 printer stops before the job is done

    - by aserwin
    I have a Canon Pixma MP150. It's old but it still works well. The problem is that since I have been running Ubuntu 12.04 the printer exhibits odd behavior. Usually right at the end of a job, it will stop. The printing is done, but the printer is still "working" and it won't release the paper. If I pull it out and test the printer, it will start over and print the same job. Once I just let it be and about an hour or so later it finished with no problems. My question is, could the be an issue with the printer (it is old) or is it the drivers in Ubuntu? Any advice (or suggestions on debugging) would be greatly appreciated as I print a lot and don't really want to buy a new printer.

    Read the article

  • Windows 2008 Server cannot access any network share

    - by Ramesh
    Hello friends I run a Windows 2008 server with SP2. This server acts as a desktop alone. Recently, I switched between two networks (corporate and other) using this system. Ever since, I am unable to access any network share on the original network from where I installed and configured the desktop. The message I get is "Network path was not found". Note that I am able to access the internet and my corporate mail server. I am told this is a Vista and Windows 2008 specific problem and I have done everything I could think of: a) Deleted the second network settings from the desktop b) Installed a patch from MS that supposed took care of this problem (with MS clearly saying they had not tested this enough) c) The SP2 install was after the problem occurred and I went ahead with it in the hope that SP2 may have something that would fix this Some additional details: a) A system admin can log into this system from a remote terminal b) I cannot get into my own system using the hidden share C$ - for instance \mymachine\C$ gives me the same message as above - Network path not found c) I can log into my system remotely using mstsc d) I cannot create shares on this system - as an extension network printers are not detected I have an update for you: The error message is as follows - **Network Error** Windows cannot access \\network_share Check the spelling of the name. Otherwise there might a problem with your network. To try to identify and resolve network problems, click Diagnose. Clicking Diagnose gives Error Code: 0x80070035 The network path was not found. Any help will be appreciated Thanks

    Read the article

  • Slight network lag on Small Business Server 2008 R2

    - by Sir.Nathan Stassen
    I recently upgraded a network from a SBS 2003 server to a SBS 2008 R2 Server. Both I and users have noticed a slight delay in network applications and browsing network drives on the new server. It is minor, maybe a second or two at most. However I am wondering if anyone knows of anyway to optimize the networking to service requests sooner to the workstations. The network is running a 1 gig network with some 100 meg devices (mainly network printers). All workstations are XP SP3 Network software runs out of a shared folder mapped as a network drive, no sql databases. Server is a Dell Poweredge T610 with plenty of ram, cpu power, and storage.

    Read the article

  • Cannot find network path for computer in workgroup of home Windows XP PCs

    - by John Galt
    VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

    Read the article

  • What kind of paralell cable is this?

    - by rodey
    I have an HP LaserJet 4600 and need to order a replacement cable for it. Here is a picture of the port on the printer and the cable is currently in use. I've never seen one of this style before. Can anyone provide the type of port this is or a provide a link to a replacement cable? Thanks!

    Read the article

  • Can not access network computers anymore

    - by Johny Skovdal
    Last Thursday (03/05/12) I got a new computer to be able to work from home. I plugged it, by cable, into the company network and installed most of the software needed for me to do so, by accessing a share on my stationary computer at work. I had no issues here what so ever, and everything just worked. Yesterday evening I tried accessing the company network trough Windows VPN, and while I was able to connect to the network, I was unable to connect to any computers on the network. I did, however, get an error when connecting, but I can't seem to get the error again, to get the details of the error message. Today I am sitting on the company network again, and now I can not access anything on the network like I could last Thursday, though I can ping all the computers I am attempting to access. Here is a list of details that might help in troubleshooting this issue (updated): List of observations / actions My computer is identical to another computer that has no issues. It is not on the domain but rather on the default workgroup, but this was not an issue last Thursday, so I am assuming it still is not. I am able to access my e-mail on the exchange server. I can connect to our TFS server from Visual Studio but not from Explorer. I can also connect to Database Servers and Remote Desktop. I can see several computers when browsing network computers, but I am unable to connect to any of them. When trying to connect to a computer I am consistently met with the error code "0x80070035" (network path not found). I also get the 0x80070035 error when double clicking the target computer from the Network UI. I am not met with a login dialog when trying to access a computer, as I should, since I am not on the domain. (I did login to both Exchange, Remote Desktop and TFS though) Between Thursday where it worked and Sunday evening where it did not, I have installed quite a few security updates, plus various tools etc. that I need for programming. I have tried accessing by computer name and ip and neither of them work. I can ping by computer name. I have deleted all (1 entry) stored network credentials. I am able to access my computer from the target computer. Client and Server can see each other on the network = Network Discovery is enabled. I am using the network profile "Work". When accessing the network through VPN, I am unable to get anything to work using computernames, but all of the above applies when using IP adresses instead of computername. I run Windows 7 Home Premium on my computer. Using powershell attempting to access a share I get the following error (ComputerName and ShareName being correct values of course): PS C:\Users\MyUser> cd \\ComputerName\ShareName Set-Location : Cannot find path '\\ComputerName\ShareName' because it does not exist. At line:1 char:3 + cd <<<< \\ComputerName\ShareName + CategoryInfo : ObjectNotFound: (\\ComputerName\ShareName:String) [Set-Location], ItemNotFoundException + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SetLocationCommand However, ping'ing the same machine (ping ComputerName) from powershell I get response immediately. (As mentioned in the list of observations/actions, I tried the above with the IP address again on VPN, to get the same result) Conclusion So to sum up, pretty much the only thing I can not do, is access the other computers through browsing (explorer.exe, powershell, map networkdrive, etc.), which means that I am pretty much down to, that it is unable to resolve the path somehow, when trying to connect to other computers trough browsing, though the path gets resolved perfectly using all kinds of other services. Any recommendations as to what I can try next to resolve the issue? :)

    Read the article

  • problem with network-manager-pptp

    - by Riuzaki90
    I've a problema with the VPA CAble connection of my university... on the website of the university there's a .sh file that set all the variables of the connection in ETC/PPP/PEERS and another .sh file that call the connection...I'm on ubuntu 11.10 and when I run the setup.sh I have this error: impossible to find network-manager-pptp these are the two file that I had talk about: #!/bin/bash echo "Creazione della connessione in corso attendere........." apt-get update apt-get install pptp-linux network-manager-pptp echo -n "Digitare la propria Username: " read USERNAME echo -n "Digitare la propria Password: " read PASSWORD pptpsetup --create UNICAL_Campus_Access --server 160.97.73.253 --username $USERNAME --password $PASSWORD echo 'pty "pptp 160.97.73.253 --nolaunchpppd"' >/etc/ppp/peers/UNICAL_Campus_Access echo 'require-mppe-128' >>/etc/ppp/peers/UNICAL_Campus_Access echo 'file /etc/ppp/options.pptp'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'name '$USERNAME''>>/etc/ppp/peers/UNICAL_Campus_Access echo 'remotename PPTP'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'ipparam UNICAL_Campus_Access'>>/etc/ppp/peers/UNICAL_Campus_Access echo $USERNAME' PPTP '$PASSWORD' *'>>/etc/ppp/chap-secrets rm /etc/ppp/options.pptp echo '###############################################################################'>/etc/ppp/options.pptp echo '# $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# Sample PPTP PPP options file /etc/ppp/options.pptp'>>/etc/ppp/options.pptp echo '# Options used by PPP when a connection is made by a PPTP client.'>>/etc/ppp/options.pptp echo '# This file can be referred to by an /etc/ppp/peers file for the tunnel.'>>/etc/ppp/options.pptp echo '# Changes are effective on the next connection. See "man pppd".'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# You are expected to change this file to suit your system. As'>>/etc/ppp/options.pptp echo '# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/'>>/etc/ppp/options.pptp echo '# and the kernel MPPE module available from the CVS repository also on'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe.'>>/etc/ppp/options.pptp echo '###############################################################################'>>/etc/ppp/options.pptp echo '# Lock the port'>>/etc/ppp/options.pptp echo 'lock'>>/etc/ppp/options.pptp echo '# Authentication'>>/etc/ppp/options.pptp echo '# We do not need the tunnel server to authenticate itself'>>/etc/ppp/options.pptp echo 'noauth'>>/etc/ppp/options.pptp echo '#We won"t do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2'>>/etc/ppp/options.pptp echo '#(you may need to remove these refusals if the server is not using MPPE)'>>/etc/ppp/options.pptp echo 'refuse-pap'>>/etc/ppp/options.pptp echo 'refuse-eap'>>/etc/ppp/options.pptp echo 'refuse-chap'>>/etc/ppp/options.pptp echo 'refuse-mschap'>>/etc/ppp/options.pptp echo '# Compression Turn off compression protocols we know won"t be used'>>/etc/ppp/options.pptp echo 'nobsdcomp'>>/etc/ppp/options.pptp echo 'nodeflate'>>/etc/ppp/options.pptp echo '# Encryption'>>/etc/ppp/options.pptp echo '# (There have been multiple versions of PPP with encryption support,'>>/etc/ppp/options.pptp echo '# choose with of the following sections you will use. Note that MPPE'>>/etc/ppp/options.pptp echo '# requires the use of MSCHAP-V2 during authentication)'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras'>>/etc/ppp/options.pptp echo '# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#require-mppe-128'>>/etc/ppp/options.pptp echo '#}}}'>>/etc/ppp/options.pptp echo '# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec'>>/etc/ppp/options.pptp echo '#ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#mppe required,stateless'>>/etc/ppp/options.pptp echo '# }}}'>>/etc/ppp/options.pptp echo "setup di 'UNICAL Campus Access' terminato correttamente" echo "per connettersi eseguire lo script 'UNICAL_Campus_Access.sh' " and the second: #!/bin/bash echo "Connessione alla Rete del Centro Residenziale in corso attendere........." modprobe ppp_mppe pppd call UNICAL_Campus_Access sleep 30 tail -n 8 /var/log/messages echo "Connessione Stabilita" echo -n "Per terminare la connessione premere invio (in alternativa eseguire il commando 'killall pppd'):----> " read CONN killall pppd echo "Connessione terminata" I've correctly installed network-manager-pptp to the latest version...help?

    Read the article

  • The Differences between MAC Address and Network Layer Address

    A Mac address is a fixed number associated with a NICs onboard memory. It is initially assigned at the factory. The MAC address is broken up into 2 parts. The first part is the Block id which is six digit sequences that is unique to each vender. The second section is the device id which is created and assigned by the manufacture. A Network layer address is different because there format based on the type of protocol and network used. Also, there unique id is based on a hierarchal addressing theme on subsets of data  and narrowing it down. Just like in an address you can narrow down your house, for example: Florida, Boca Raton, 33428, SW 53th street states that you live in Florida. You also live in the area located in Florida called Boca Raton and you are also in the area of 33428 which is located in Boca Raton. Finally you live on SW 8th street which is in the area of 33428 which is located in Boca Raton which is also located in Florida.

    Read the article

  • CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

    - by SJaguar13
    I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

    Read the article

  • Differentiate VMware network adapter from physical network adapters

    - by Venkat
    I have to differentiate between the real addresses and the VM addresses using any Windows API. I'm using Getadaptersaddresses API to populate a list of ipaddresses for the local machine. I need to extract only the "real" addresses apart from the addresses associated with the VMware network adapter and other addresses(auto-configuration and tunnel adapter addresses) I've not been able to find any API or any flag to differentiate this. Is there any way this can be done? PS:The IfType flag in the IP_ADAPTER_ADDRESSES structure returned by Getadaptersaddresses doesn't help me differentiate between VMware addresses and the real addresses

    Read the article

  • Network Logon Issues with Group Policy and Network

    - by bobloki
    I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

    Read the article

  • How to print PCL Directly to the printer? Vb.net VS 2010

    - by Justin
    Good day, I've been trying to upgrade an old Print Program that prints raw pcl directly to the printer. The print program takes a PCL Mask and a PCL Batch Spool File (just pcl with page turn commands, I think) merges them and sends them off to the printer. I'm able to send to the Printer a file stream of PCL but I get mixed results and i do not understand why printing is so difficult under .net. I mean yes there is the PrintDocument class, but to print PCL... Let's just say I'm ready to detach my printer from the network and burn it a live. Here is my class PrintDirect (rather a hybrid class) Imports System Imports System.Text Imports System.Runtime.InteropServices <StructLayout(LayoutKind.Sequential)> _ Public Structure DOCINFO <MarshalAs(UnmanagedType.LPWStr)> _ Public pDocName As String <MarshalAs(UnmanagedType.LPWStr)> _ Public pOutputFile As String <MarshalAs(UnmanagedType.LPWStr)> _ Public pDataType As String End Structure 'DOCINFO Public Class PrintDirect <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function OpenPrinter(ByVal pPrinterName As String, ByRef phPrinter As IntPtr, ByVal pDefault As Integer) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function StartDocPrinter(ByVal hPrinter As IntPtr, ByVal Level As Integer, ByRef pDocInfo As DOCINFO) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function StartPagePrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Ansi, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function WritePrinter(ByVal hPrinter As IntPtr, ByVal data As String, ByVal buf As Integer, ByRef pcWritten As Integer) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function EndPagePrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function EndDocPrinter(ByVal hPrinter As IntPtr) As Long End Function <DllImport("winspool.drv", CharSet:=CharSet.Unicode, ExactSpelling:=True, CallingConvention:=CallingConvention.StdCall)> _ Public Shared Function ClosePrinter(ByVal hPrinter As IntPtr) As Long End Function 'Helps uses to work with the printer Public Class PrintJob ''' <summary> ''' The address of the printer to print to. ''' </summary> ''' <remarks></remarks> Public PrinterName As String = "" Dim lhPrinter As New System.IntPtr() ''' <summary> ''' The object deriving from the Win32 API, Winspool.drv. ''' Use this object to overide the settings defined in the PrintJob Class. ''' </summary> ''' <remarks>Only use this when absolutly nessacary.</remarks> Public OverideDocInfo As New DOCINFO() ''' <summary> ''' The PCL Control Character or the ascii escape character. \x1b ''' </summary> ''' <remarks>ChrW(27)</remarks> Public Const PCL_Control_Character As Char = ChrW(27) ''' <summary> ''' Opens a connection to a printer, if false the connection could not be established. ''' </summary> ''' <returns></returns> ''' <remarks></remarks> Public Function OpenPrint() As Boolean Dim rtn_val As Boolean = False PrintDirect.OpenPrinter(PrinterName, lhPrinter, 0) If Not lhPrinter = 0 Then rtn_val = True End If Return rtn_val End Function ''' <summary> ''' The name of the Print Document. ''' </summary> ''' <value></value> ''' <returns></returns> ''' <remarks></remarks> Public Property DocumentName As String Get Return OverideDocInfo.pDocName End Get Set(ByVal value As String) OverideDocInfo.pDocName = value End Set End Property ''' <summary> ''' The type of Data that will be sent to the printer. ''' </summary> ''' <value>Send the print data type, usually "RAW" or "LPR". To overide use the OverideDocInfo Object</value> ''' <returns>The DataType as it was provided, if it is not part of the enumeration it is set to "UNKNOWN".</returns> ''' <remarks></remarks> Public Property DocumentDataType As PrintDataType Get Select Case OverideDocInfo.pDataType.ToUpper Case "RAW" Return PrintDataType.RAW Case "LPR" Return PrintDataType.LPR Case Else Return PrintDataType.UNKOWN End Select End Get Set(ByVal value As PrintDataType) OverideDocInfo.pDataType = [Enum].GetName(GetType(PrintDataType), value) End Set End Property Public Property DocumentOutputFile As String Get Return OverideDocInfo.pOutputFile End Get Set(ByVal value As String) OverideDocInfo.pOutputFile = value End Set End Property Enum PrintDataType UNKOWN = 0 RAW = 1 LPR = 2 End Enum ''' <summary> ''' Initializes the printing matrix ''' </summary> ''' <param name="PrintLevel">I have no idea what the hack this is...</param> ''' <remarks></remarks> Public Sub OpenDocument(Optional ByVal PrintLevel As Integer = 1) PrintDirect.StartDocPrinter(lhPrinter, PrintLevel, OverideDocInfo) End Sub ''' <summary> ''' Starts the next page. ''' </summary> ''' <remarks></remarks> Public Sub StartPage() PrintDirect.StartPagePrinter(lhPrinter) End Sub ''' <summary> ''' Writes a string to the printer, can be used to write out a section of the document at a time. ''' </summary> ''' <param name="data">The String to Send out to the Printer.</param> ''' <returns>The pcWritten as an integer, 0 may mean the writter did not write out anything.</returns> ''' <remarks>Warning the buffer is automatically created by the lenegth of the string.</remarks> Public Function WriteToPrinter(ByVal data As String) As Integer Dim pcWritten As Integer = 0 PrintDirect.WritePrinter(lhPrinter, data, data.Length - 1, pcWritten) Return pcWritten End Function Public Sub EndPage() PrintDirect.EndPagePrinter(lhPrinter) End Sub Public Sub CloseDocument() PrintDirect.EndDocPrinter(lhPrinter) End Sub Public Sub ClosePrint() PrintDirect.ClosePrinter(lhPrinter) End Sub ''' <summary> ''' Opens a connection to a printer and starts a new document. ''' </summary> ''' <returns>If false the connection could not be established. </returns> ''' <remarks></remarks> Public Function Open() As Boolean Dim rtn_val As Boolean = False rtn_val = OpenPrint() If rtn_val Then OpenDocument() End If Return rtn_val End Function ''' <summary> ''' Closes the document and closes the connection to the printer. ''' </summary> ''' <remarks></remarks> Public Sub Close() CloseDocument() ClosePrint() End Sub End Class End Class 'PrintDirect Here is how I print my file. I'm simple printing the PCL Masks, to show proof of concept. But I can't even do that. I can effectively create PCL and send it the printer without reading the file and it works fine... Plus I get mixed results with different stream reader text encoding as well. Dim pJob As New PrintDirect.PrintJob pJob.DocumentName = " test doc" pJob.DocumentDataType = PrintDirect.PrintJob.PrintDataType.RAW pJob.PrinterName = sPrinter.GetDevicePath '//This is where you'd stick your device name, sPrinter stands for Selected Printer from a dropdown (combobox). 'pJob.DocumentOutputFile = "C:\temp\test-spool.txt" If Not pJob.OpenPrint() Then MsgBox("Unable to connect to " & pJob.PrinterName, MsgBoxStyle.OkOnly, "Print Error") Exit Sub End If pJob.OpenDocument() pJob.StartPage() Dim sr As New IO.StreamReader(Me.txtFile.Text, Text.Encoding.ASCII) '//I've got best results with ASCII before, but only mized. Dim line As String = sr.ReadLine 'Fix for fly code on first run 'If line = 27 Then line = PrintDirect.PrintJob.PCL_Control_Character Do While (Not line Is Nothing) pJob.WriteToPrinter(line) line = sr.ReadLine Loop 'pJob.WriteToPrinter(ControlChars.FormFeed) pJob.EndPage() pJob.CloseDocument() sr.Close() sr.Dispose() sr = Nothing pJob.Close() I was able to get to print the mask, in the morning... now I'm getting strange printer characters scattered through 5 pages... I'm totally clueless. I must have changed something or the printer is at fault. You can access my test Check Mask, here http://kscserver.com/so/chk_mask.zip .

    Read the article

  • Finding most efficient transmission size in varying network latency scenarios

    - by rwmnau
    I'm building a .NET remoting client/server that will be transmitting thousands of files, of varying sizes (everything from a few bytes to hundreds of MB), and I'm curious about a general method for finding the appropriate transmission size. As I see it, there's the following tradeoff: Serialize entire file into a transmission object and transmit at once, regardless of size. This would be the fastest, but a failure during tranmission requires that the whole file be re-transmitted. If the file size is larger than something small (like 4KB), break it into 4KB chunks and transmit those, re-assembling on the server. In addition to the complexity of this, it's slower because of continued round-trips and acknowledgements, though a failure of any one piece doesn't waste much time. The ideal transmission method (when taking into account negotiation latency vs. failure rate) is somewhere in between, and I'm wondering about how to find out the best size for that particular client. Do I have some dynamic tuning step in my transmission that looks at the current bytes/second average, and then raises the transmission size until the speed starts to drop (failures overwhelm negotiation cost)? Or is there some other method for determining ideal transmission size? The application will be multi-threaded, so number of threads also factors in to the calculation. I'm not looking for a formula (though I'll take one if you've got it), but just what to consider as I create this process.

    Read the article

  • Configuring a POS printer using POS.NET

    - by codeincarnate
    Is it possible to configure a POS printer service object (an Epson one) from a POS.NET application (such as configuring the IP address for a network connected printer)? It would be nice if it didn't need to be done separately through the applications that Epson provides.

    Read the article

  • Network Logon Issues with Group Policy and Network

    - by bobloki
    I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

    Read the article

  • Neural Network problems

    - by Betamoo
    I am using an external library for Artificial Neural Networks in my project.. While testing the ANN, It gave me output of all NaN (not a number in C#) The ANN has 8 input , 5 hidden , 5 hidden , 2 output, and all activation layers are of Linear type , and it uses back-propagation, with learning rate 0.65 I used one testcase for training { -2.2, 1.3, 0.4, 0.5, 0.1, 5, 3, -5 } ,{ -0.3, 0.2 } for 1000 epoch And I tested it on { 0.2, -0.2, 5.3, 0.4, 0.5, 0, 35, 0.0 } which gave { NaN , NaN} Note: this is one example of many that produces same case... I am trying to discover whether it is a bug in the library, or an illogical configuration.. The reasons I could think of for illogical configuration: All layers should not be linear Can not have descending size layers, i.e 8-5-5-2 is bad.. Only one testcase ? Values must be in range [0,1] or [-1,1] Is any of the above reasons could be the cause of error, or there are some constraints/rules that I do not know in ANN designing..? Note: I am newbie in ANN

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >