Search Results

Search found 8706 results on 349 pages for 'dual monitor'.

Page 131/349 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • Interval arithmetic to correctly deal with end of month - Oracle SQL

    - by user2003974
    I need a function which will do interval arithmetic, dealing "correctly" with the different number of days in a month. For my version of "correctly" - see below! First try select to_date('31-May-2014') + interval '1' months from dual This returns an error, because there is no 31st June. I understand that this behaviour is expected due to the ANSI standard. Second try select add_months(to_date('31-May-2014'),1) from dual This correctly (in my use case) returns 30th June 2014, which is great. BUT select add_months(to_date('28-Feb-2014'),1) from dual returns 31st March 2014, when I want 28th March 2014. Background This has to do with legal deadlines. The deadlines are expressed in law as a number of months (say, 3) from a base date. If the base date is last day of the month and three months later the month is longer, then the deadline does NOT extend to the end of the longer month (as per the add_months function). However, if the base date is last day of the month and three months later the month is shorter, then the deadline expires on the last day of the shorter month. Question Is there a function that does what I need? I have intervals (year to month) stored in a table, so preferably the function would look like: add_interval_correctly(basedate DATE, intervaltoadd INTERVAL YEAR TO MONTH)

    Read the article

  • FileSystemWatcher running under impersonated user

    - by AdmSteck
    I have an c# winform application that runs under a local account but needs to monitor folders on a domain. I am using slightly modified code from here to copy the files and that works fine. Can similar code be used with the FileSystemWatcher set up impersonation so I can monitor a folder on a domain?

    Read the article

  • JNDI / Classpath problem in glassfish

    - by Michael Borgwardt
    I am in the process of converting a large J2EE app from EJB 2 to EJB 3 (all stateless session beans, using glassfish 2.1.1), and running out of ideas. The first EJB I converted (let's call it Foo) ran without major problems (it was the only one in its ejb-module and I could completely replace the deployment descriptor with annotations) and the app ran fine. But after converting the second one (let's call it Bar, one of several in a different ejb-module) there is a weird combination of problems: The app deploys without errors (nothing in the logs either) There is an error when looking up Bar via JNDI When looking at the JNDI tree in the glassfish admin console, Bar is not present at all. Then when I look at the logs, I see this (Foo is the correct name of the EJB's remote interface of the first converted, previously working EJB): Caused by: javax.naming.NamingException: ejb ref resolution error for remote business interface Foo [Root exception is java.lang.ClassNotFoundException: Foo] at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:425) at com.sun.ejb.containers.RemoteBusinessObjectFactory.getObjectInstance(RemoteBusinessObjectFactory.java:74) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:414) at com.sun.enterprise.naming.SerialContext.list(SerialContext.java:603) at javax.naming.InitialContext.list(InitialContext.java:395) at com.sun.enterprise.admin.monitor.jndi.JndiMBeanHelper.getJndiEntriesByContextPath(JndiMBeanHelper.java:106) at com.sun.enterprise.admin.monitor.jndi.JndiMBeanImpl.getNames(JndiMBeanImpl.java:231) ... 68 more Caused by: java.lang.ClassNotFoundException: XXX at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1578) at com.sun.ejb.EJBUtils.getBusinessIntfClassLoader(EJBUtils.java:679) at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:348) ... 75 more This is followed by more exceptions for all the entries that (like Foo) do appear in the JNDI tree. These look like this: Caused by: javax.naming.NotContextException: BarHome cannot be listed at com.sun.enterprise.naming.SerialContext.list(SerialContext.java:607) at javax.naming.InitialContext.list(InitialContext.java:395) at com.sun.enterprise.admin.monitor.jndi.JndiMBeanHelper.getJndiEntriesByContextPath(JndiMBeanHelper.java:106) at com.sun.enterprise.admin.monitor.jndi.JndiMBeanImpl.getNames(JndiMBeanImpl.java:231) ... 68 more However, no exception for Bar, it does not appear in the log at all except one entry during deployment. The other EJBs in the same module do appear, as does Foo. Any ideas what could cause this or how to diagnose it further? The beans are pretty straightforward: @Stateless(name = "Foo") @RolesAllowed("FOOUSER") @TransactionAttribute(TransactionAttributeType.SUPPORTS) public class FooImpl extends BaseBean implements Foo { I'm also having some problems with the deployment descriptor for Bar (I'd like to eliminate it, but glassfish doesn't seem to like having a bean appear only in sun-ejb-jar.xml, or having some beans in a module declared in the descriptor and others use only annotations), but I can't see how that could cause the ClassNotFoundException on Foo. Is there a way to see the ClassPath that Glassfish is actually using?

    Read the article

  • how can I get _NET_WORKAREA for seperate monitors

    - by Chris Camacho
    using gdk_screen_get_monitor_geometry (xrandr) I can get the resolutions for separate monitors (for example when there are 2 monitors used as a single screen like nvidias twinview) However _NET_WORKAREA seems to give one giant area even if the resolution of the other monitor is smaller. (a panel at the bottom of the second monitor would appear to be inside this work area) How can I get the actual workarea of other monitors even getting struts there seems no support for separate monitors just the main one...

    Read the article

  • How to observer when a UIAlertView is displayed?

    - by DotSlashSlash
    Is it anyway possible to observe if a UIAlertView is being displayed and call a function when it is. The UIAlertView is not being created and displayed in the same class which I want a function to be called in. Its hard to explain but to put it simply I need to somehow monitor or observe if the view becomes like out of first responder or something because I dont think it is possible to monitor if a UIAlertView is being displayed :/

    Read the article

  • Programming graphics and sound on PC - Total newbie questions, and lots of them!

    - by Russel
    Hello, This isn't exactly specifically a programming question (or is it?) but I was wondering: How are graphics and sound processed from code and output by the PC? My guess for graphics: There is some reserved memory space somewhere that holds exactly enough room for a frame of graphics output for your monitor. IE: 800 x 600, 24 bit color mode == 800x600x3 = ~1.4MB memory space Between each refresh, the program writes video data to this space. This action is completed before the monitor refresh. Assume a simple 2D game: the graphics data is stored in machine code as many bytes representing color values. Depending on what the program(s) being run instruct the PC, the processor reads the appropriate data and writes it to the memory space. When it is time for the monitor to refresh, it reads from each memory space byte-for-byte and activates hardware depending on those values for each color element of each pixel. All of this of course happens crazy-fast, and repeats x times a second, x being the monitor's refresh rate. I've simplified my own likely-incorrect explanation by avoiding talk of double buffering, etc Here are my questions: a) How close is the above guess (the three steps)? b) How could one incorporate graphics in pure C++ code? I assume the practical thing that everyone does is use a graphics library (SDL, OpenGL, etc), but, for example, how do these libraries accomplish what they do? Would manual inclusion of graphics in pure C++ code (say, a 2D spite) involve creating a two-dimensional array of bit values (or three dimensional to include multiple RGB values per pixel)? Is this how it would be done waaay back in the day? c) Also, continuing from above, do libraries such as SDL etc that use bitmaps actual just build the bitmap/etc files into machine code of the executable and use them as though they were build in the same matter mentioned in question b above? d) In my hypothetical step 3 above, is there any registers involved? Like, could you write some byte value to some register to output a single color of one byte on the screen? Or is it purely dedicated memory space (=RAM) + hardware interaction? e) Finally, how is all of this done for sound? (I have no idea :) )

    Read the article

  • Ruby is already using the class name of my model

    - by Octopus Inc
    I'm making a forum application with various levels of authorization, one of which is a Monitor. I am doing this by extending my User class, and I plan on fine tuning this with "-ship" classes (e.g. administratorship, authorship, moderatorship, etc.). Apparently the Monitor class is part of ruby mixin. How do I keep my resource name without the collisions?

    Read the article

  • Monitoring File Changes in C#

    - by Pcstalljr
    Hi there, I'm using C# for a mini project of mine, I am trying to monitor files that are changed, Deleted, And/or created. And export that to a file. But I am not quite sure how to monitor files. Any ideas?

    Read the article

  • Monitoring GPS Coordinates

    - by Suriyan Suresh
    I need to monitor GPS Coordinates changes at every 15 min and take action based on that. as per bada developer guide report "only one application allowed to run at a time if another application try to run first one is closed" .so that how do i monitor GPS coordinates without interruption from other applications. how do i keep my application running at all times

    Read the article

  • How Can I Log and Find the Most Expensive Queries?

    - by Pure.Krome
    Hi folks The activity monitor in sql2k8 allows us to see the most expensive queries. Ok, that's kewl, but is there a way I can log this info or get this info via query analyser? I don't really want to have the Sql Management console open and me looking at the activity monitor dashboard. I want to figure out which queries are poorly written/schema is poorly designed, etc. Thanks heaps for any help!

    Read the article

  • How to solve High Load average issue in Linux systems?

    - by RoCkStUnNeRs
    The following is the different load with cpu time in different time limit . The below output has parsed from the top command. TIME LOAD US SY NICE ID WA HI SI ST 12:02:27 208.28 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:23:22 195.48 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:34:55 199.15 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 13:41:50 203.66 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st 13:42:58 278.63 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st Following is the additional Information of the system? cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4658.69 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4654.99 clflush size : 64 power management: Memory: total used free shared buffers cached Mem: 2 1 1 0 0 0 Swap: 5 0 5 let me know why the system is getting abnormally this much high load?

    Read the article

  • Dreamweaver CS5 - Have Design Window as a Panel?

    - by Oliver Jones
    I've been looking around on the dreamweaver interface, and I'm trying to get my design window as an external panel. Reason is, I have a dual monitor system, and I would like to have the main window (where you can have both code/split/design) on my main screen, but with the code selected, and a design view on my secondary monitor. I'm assuming this can't be done, although I have noticed you can have your code as an external panel (Code Inspector). Would like to hear your input. Thanks

    Read the article

  • How to tweak the performance of Bit blit on Barco monitors?

    - by krishna
    Hi, The performance of bit blit on Small monitor(16 bpp,60Hz,1280X1024 resolution) it gives 0.9909ms. The performance of big monitors(8bpp,60hz,2048X5260) it gives 52.315ms . I use SRCCOPY to do the bit blit operation.how we can optimize the performance of bit blit on big monitor? Please share your thoughts. Thanks kk

    Read the article

  • Multimonitor taskbar in .Net

    - by kalan
    I have an idea to write a multimotor taskbar application in c# for windows xp. So, does anyone have any information how to put a taskbar on the second monitor, to make it use windows styles, to prevent aplications running on the second monitor to appear in default taskbar, so on... Any help would be ...helpful )))

    Read the article

  • Best Practices for Working with Multiple Monitors in Visual Studio 2010

    - by Clever Human
    Now that Visual Studio 2010 has support for multiple monitors, I am curious how other people have their environments arranged. I have yet to come up with an arrangement that I am really satisfied with. The current best I have come up with for my 2 monitor system is to have all code windows detached. Then, on my primary monitor, I am able to have two code windows side by side (using the Windows 7 keyboard shortcuts WinKey+LeftArrow and WinKey+RightArrow.) On my secondary monitor I put the rest of the IDE with all of the tool windows that are normally on the bottom (errors list, find window, call stack, etc...) docked where the code windows normally go. I've also tried having all those things detached and having almost nothing in the IDE proper. The problems with this layout are: Newly opened code windows always open in the IDE, not on top of one of the detached windows. Detached code windows do not remember their exact placement from session to session (they are slightly off, having me to use the winkey + arrow key shortcut again and again for each window. There seems to be no way to have the code panes aware that they are on top of one another (IE -- multiple tabs.) The CTRL+TAB shortcut always displays on top of the IDE proper. The Code Panes are always "on top" of (children of) the IDE. So clicking on any code pane brings the IDE to the foreground, even when I care only about that code pane, and not the IDE. Other more minor issues... What would go a long way to making this better is having the code panes detach such that they are tab strips that can have other code panes docked within them. The new multi-monitor support in VS2010 is good, but it still seems really lacking. Can these issues be solved with an add-in? If so, is anyone aware of one? Is there a better way to work with the IDE on multiple monitors than what I am doing? NOTE: While this question is subjective (there is certainly no "this is the best way and that's final" answer) I'd really like to know possibly better methods of working with the IDE than what I have come up with. The intent is not to start a "mine's best" flame war.

    Read the article

  • [C#] Specifying startup window/form location on multiple displays

    - by JeffE
    I have two displays (two monitors) connected to my machine, and I noticed a strange thing happening today. I had an Explorer window open with my compiled exe on my primary display, and when I double-clicked it, it opened in the primary display (left monitor). However if I pressed enter to launch the executable, it started in the secondary display (right monitor). The window state of the initial form is maximized. Is there a way to tell C# to open the initial form in the primary display?

    Read the article

  • Windows Cannot Boot - 0xc0000225

    - by B__
    I've had Windows 7 installed for months on my Thinkpad T60 laptop and today out of the blue when I tried to boot, it started the Windows loading screen and immediately I got this error: Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. Through some research, I see people get this problem when a repartitioning goes wrong or there's a problem with their dual boot. I'm not dual booting my machine and I haven't messed with my partitions since I installed the OS. This error is truly out of the blue. I've run memory diagnostics from a Windows boot disc and hard drive diagnostics from my BIOS and neither found a problem. I don't have any backups to restore from so I'm hoping to find a fix for this. Anyone seen this kind of thing before? Thanks

    Read the article

  • 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

    - by Hossein Aarabi
    I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

  • Merging partitions and removing windows of one partition

    - by SmartLemon
    I have two partitions on my laptop, I created a new one when installing windows 8 pro because windows 7 wouldn't upgrade to it for some odd reason. The main partition, which has 631 GB ( has windows 7 installed on it, and the second partition is 49.9 GB and has windows 8 installed on it. What I need to do is remove windows 7 from the other one (Yeah its dual booting), make it so it boots straight into windows 8, without showing the dual boot screen, and also merge the two drives together. Only problem is, I have no idea how to do this. Please don't use complete lamens terms, I am a software developer so I know at least a bit about computers. Here's disk management so you can see how its set out.

    Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >