Search Results

Search found 12222 results on 489 pages for 'initial context'.

Page 136/489 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

  • European Interoperability Framework - a new beginning?

    - by trond-arne.undheim
    The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

    Read the article

  • Dual Screen will only mirror after 12.04 upgrade

    - by Ne0
    I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

    Read the article

  • Technical differences between square and hexagon for a grid?

    - by Marlon Dias
    I'm developing a 2D city-building game and trying to decide on the type of grid. There will be vehicles, so the unit movement is important too. I know there are visual differences for using Squares or Hexagons, what I want know is: What are the issues for programming each type of grid regarding implementation and performance? Is there a tradeoff or specific benefit for using one of them in a game context?

    Read the article

  • Introducing Oracle System Assistant

    - by B.Koch
    by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

    Read the article

  • Why are invariants important in Computer Science

    - by Antony Thomas
    I understand 'invariant' in its literal sense. I also recognize them when I type code. But I don't think I understand the importance of this term in the context of computer science. Whenever I read conversations\white papers about language design from famous programmers\computer scientists, the term 'invariant' keeps popping up as a jargon; and that is the part I don't understand. What is so special about it?

    Read the article

  • Declaring Anonymous Types in VB

    Using an anonymous type in VB, which is essential for technologies like LINQ, means that the compiler will generate a class for you based on context and named initializers saving you time and effort. To learn more read on.

    Read the article

  • SharePoint 2010 Field Expression Builder

    - by Ricardo Peres
    OK, back to two of my favorite topics, expression builders and SharePoint. This time I wanted to be able to retrieve a field value from the current page declaratively on the markup so that I can assign it to some control’s property, without the need for writing code. Of course, the most straight way to do it is through an expression builder. Here’s the code: 1: [ExpressionPrefix("SPField")] 2: public class SPFieldExpressionBuilder : ExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetFieldValue(String fieldName, PropertyInfo propertyInfo) 6: { 7: Object fieldValue = SPContext.Current.ListItem[fieldName]; 8:  9: if (fieldValue != null) 10: { 11: if ((fieldValue is IConvertible) && (typeof(IConvertible).IsAssignableFrom(propertyInfo.PropertyType) == true)) 12: { 13: if (propertyInfo.PropertyType.IsAssignableFrom(fieldValue.GetType()) != true) 14: { 15: fieldValue = Convert.ChangeType(fieldValue, propertyInfo.PropertyType); 16: } 17: } 18: } 19:  20: return (fieldValue); 21: } 22:  23: #endregion 24:  25: #region Public override methods 26: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 27: { 28: return (GetFieldValue(entry.Expression, entry.PropertyInfo)); 29: } 30:  31: public override CodeExpression GetCodeExpression(BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 32: { 33: if (String.IsNullOrEmpty(entry.Expression) == true) 34: { 35: return (new CodePrimitiveExpression(String.Empty)); 36: } 37: else 38: { 39: return (new CodeMethodInvokeExpression(new CodeMethodReferenceExpression(new CodeTypeReferenceExpression(this.GetType()), "GetFieldValue"), new CodePrimitiveExpression(entry.Expression), new CodePropertyReferenceExpression(new CodeArgumentReferenceExpression("entry"), "PropertyInfo"))); 40: } 41: } 42:  43: #endregion 44:  45: #region Public override properties 46: public override Boolean SupportsEvaluate 47: { 48: get 49: { 50: return (true); 51: } 52: } 53: #endregion 54: } You will notice that it will even try to convert the field value to the target property’s type, through the use of the IConvertible interface and the Convert.ChangeType method. It must be placed on the Global Assembly Cache or you will get a security-related exception. The other alternative is to change the trust level of your web application to full trust. Here’s how to register it on Web.config: 1: <expressionBuilders> 2: <!-- ... --> 3: <add expressionPrefix="SPField" type="MyNamespace.SPFieldExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=29186a6b9e7b779f" /> 4: </expressionBuilders> And finally, here’s how to use it on an ASPX or ASCX file inside a publishing page: 1: <asp:Label runat="server" Text="<%$ SPField:Title %>"/>

    Read the article

  • Android in-game pause screen

    - by Max
    Right now Im calling a new activity with an xml-view when I pause my game, but Since I do this I need to use context in my real-time code, and this is causing a memory leak. Is there any preffered way to pause the game? By pause I mean if game is over, if I die, or if I press pause-button. Would a custom dialog work just aswell? this would mean I wont have to leave my main-activity while im in-game.

    Read the article

  • Security in Software

    The term security has many meanings based on the context and perspective in which it is used. Security from the perspective of software/system development is the continuous process of maintaining confidentiality, integrity, and availability of a system, sub-system, and system data. This definition at a very high level can be restated as the following: Computer security is a continuous process dealing with confidentiality, integrity, and availability on multiple layers of a system. Key Aspects of Software Security Integrity Confidentiality Availability Integrity within a system is the concept of ensuring only authorized users can only manipulate information through authorized methods and procedures. An example of this can be seen in a simple lead management application.  If the business decided to allow each sales member to only update their own leads in the system and sales managers can update all leads in the system then an integrity violation would occur if a sales member attempted to update someone else’s leads. An integrity violation occurs when a team member attempts to update someone else’s lead because it was not entered by the sales member.  This violates the business rule that leads can only be update by the originating sales member. Confidentiality within a system is the concept of preventing unauthorized access to specific information or tools.  In a perfect world the knowledge of the existence of confidential information/tools would be unknown to all those who do not have access. When this this concept is applied within the context of an application only the authorized information/tools will be available. If we look at the sales lead management system again, leads can only be updated by originating sales members. If we look at this rule then we can say that all sales leads are confidential between the system and the sales person who entered the lead in to the system. The other sales team members would not need to know about the leads let alone need to access it. Availability within a system is the concept of authorized users being able to access the system. A real world example can be seen again from the lead management system. If that system was hosted on a web server then IP restriction can be put in place to limit access to the system based on the requesting IP address. If in this example all of the sales members where accessing the system from the 192.168.1.23 IP address then removing access from all other IPs would be need to ensure that improper access to the system is prevented while approved users can access the system from an authorized location. In essence if the requesting user is not coming from an authorized IP address then the system will appear unavailable to them. This is one way of controlling where a system is accessed. Through the years several design principles have been identified as being beneficial when integrating security aspects into a system. These principles in various combinations allow for a system to achieve the previously defined aspects of security based on generic architectural models. Security Design Principles Least Privilege Fail-Safe Defaults Economy of Mechanism Complete Mediation Open Design Separation Privilege Least Common Mechanism Psychological Acceptability Defense in Depth Least Privilege Design PrincipleThe Least Privilege design principle requires a minimalistic approach to granting user access rights to specific information and tools. Additionally, access rights should be time based as to limit resources access bound to the time needed to complete necessary tasks. The implications of granting access beyond this scope will allow for unnecessary access and the potential for data to be updated out of the approved context. The assigning of access rights will limit system damaging attacks from users whether they are intentional or not. This principle attempts to limit data changes and prevents potential damage from occurring by accident or error by reducing the amount of potential interactions with a resource. Fail-Safe Defaults Design PrincipleThe Fail-Safe Defaults design principle pertains to allowing access to resources based on granted access over access exclusion. This principle is a methodology for allowing resources to be accessed only if explicit access is granted to a user. By default users do not have access to any resources until access has been granted. This approach prevents unauthorized users from gaining access to resource until access is given. Economy of Mechanism Design PrincipleThe Economy of mechanism design principle requires that systems should be designed as simple and small as possible. Design and implementation errors result in unauthorized access to resources that would not be noticed during normal use. Complete Mediation Design PrincipleThe Complete Mediation design principle states that every access to every resource must be validated for authorization. Open Design Design PrincipleThe Open Design Design Principle is a concept that the security of a system and its algorithms should not be dependent on secrecy of its design or implementation Separation Privilege Design PrincipleThe separation privilege design principle requires that all resource approved resource access attempts be granted based on more than a single condition. For example a user should be validated for active status and has access to the specific resource. Least Common Mechanism Design PrincipleThe Least Common Mechanism design principle declares that mechanisms used to access resources should not be shared. Psychological Acceptability Design PrincipleThe Psychological Acceptability design principle refers to security mechanisms not make resources more difficult to access than if the security mechanisms were not present Defense in Depth Design PrincipleThe Defense in Depth design principle is a concept of layering resource access authorization verification in a system reduces the chance of a successful attack. This layered approach to resource authorization requires unauthorized users to circumvent each authorization attempt to gain access to a resource. When designing a system that requires meeting a security quality attribute architects need consider the scope of security needs and the minimum required security qualities. Not every system will need to use all of the basic security design principles but will use one or more in combination based on a company’s and architect’s threshold for system security because the existence of security in an application adds an additional layer to the overall system and can affect performance. That is why the definition of minimum security acceptably is need when a system is design because this quality attributes needs to be factored in with the other system quality attributes so that the system in question adheres to all qualities based on the priorities of the qualities. Resources: Barnum, Sean. Gegick, Michael. (2005). Least Privilege. Retrieved on August 28, 2011 from https://buildsecurityin.us-cert.gov/bsi/articles/knowledge/principles/351-BSI.html Saltzer, Jerry. (2011). BASIC PRINCIPLES OF INFORMATION PROTECTION. Retrieved on August 28, 2011 from  http://web.mit.edu/Saltzer/www/publications/protection/Basic.html Barnum, Sean. Gegick, Michael. (2005). Defense in Depth. Retrieved on August 28, 2011 from  https://buildsecurityin.us-cert.gov/bsi/articles/knowledge/principles/347-BSI.html Bertino, Elisa. (2005). Design Principles for Security. Retrieved on August 28, 2011 from  http://homes.cerias.purdue.edu/~bhargav/cs526/security-9.pdf

    Read the article

  • Customized Database Listener Names Now Supported for EBS

    - by sreelatha.mahendra(at)oracle.com
    The database listener name can now be configured using AutoConfig with newly introduced context variable s_db_listener. Prior to this certification it was not possible to use AutoConfig generated listener.ora files for managing listeners from SRVCTL when there were multiple RAC instances on the same server.To use this feature E-Business Suite customers need to apply the following patch:11.5.10CU2 - Roll Up Patch 9535311 (RUP-U) or higher12.0.x - R12.TXK.A.delta.7 or higher 12.1.x - R12.TXK.B.delta 3 or higher

    Read the article

  • What Makes a Good Design Critic? CHI 2010 Panel Review

    - by jatin.thaker
    Author: Daniel Schwartz, Senior Interaction Designer, Oracle Applications User Experience Oracle Applications UX Chief Evangelist Patanjali Venkatacharya organized and moderated an innovative and stimulating panel discussion titled "What Makes a Good Design Critic? Food Design vs. Product Design Criticism" at CHI 2010, the annual ACM Conference on Human Factors in Computing Systems. The panelists included Janice Rohn, VP of User Experience at Experian; Tami Hardeman, a food stylist; Ed Seiber, a restaurant architect and designer; John Kessler, a food critic and writer at the Atlanta Journal-Constitution; and Larry Powers, Chef de Cuisine at Shaun's restaurant in Atlanta, Georgia. Building off the momentum of his highly acclaimed panel at CHI 2009 on what interaction design can learn from food design (for which I was on the other side as a panelist), Venkatacharya brought together new people with different roles in the restaurant and software interaction design fields. The session was also quite delicious -- but more on that later. Criticism, as it applies to food and product or interaction design, was the tasty topic for this forum and showed that strong parallels exist between food and interaction design criticism. Figure 1. The panelists in discussion: (left to right) Janice Rohn, Ed Seiber, Tami Hardeman, and John Kessler. The panelists had great insights to share from their respective fields, and they enthusiastically discussed as if they were at a casual collegial dinner. John Kessler stated that he prefers to have one professional critic's opinion in general than a large sampling of customers, however, "Web sites like Yelp get users excited by the collective approach. People are attracted to things desired by so many." Janice Rohn added that this collective desire was especially true for users of consumer products. Ed Seiber remarked that while people looked to the popular view for their target tastes and product choices, "professional critics like John [Kessler] still hold a big weight on public opinion." Chef Powers indicated that chefs take in feedback from all sources, adding, "word of mouth is very powerful. We also look heavily at the sales of the dishes to see what's moving; what's selling and thus successful." Hearing this discussion validates our design work at Oracle in that we listen to our users (our diners) and industry feedback (our critics) to ensure an optimal user experience of our products. Rohn considers that restaurateur Danny Meyer's book, Setting the Table: The Transforming Power of Hospitality in Business, which is about creating successful restaurant experiences, has many applicable parallels to user experience design. Meyer actually argues that the customer is not always right, but that "they must always feel heard." Seiber agreed, but noted "customers are not designers," and while designers need to listen to customer feedback, it is the designer's job to synthesize it. Seiber feels it's the critic's job to point out when something is missing or not well-prioritized. In interaction design, our challenges are quite similar, if not parallel. Software tasks are like puzzles that are in search of a solution on how to be best completed. As a food stylist, Tami Hardeman has the demanding and challenging task of presenting food to be as delectable as can be. To present food in its best light requires a lot of creativity and insight into consumer tastes. It's no doubt then that this former fashion stylist came up with the ultimate catch phrase to capture the emotion that clients want to draw from their users: "craveability." The phrase was a hit with the audience and panelists alike. Sometime later in the discussion, Seiber remarked, "designers strive to apply craveability to products, and I do so for restaurants in my case." Craveabilty is also very applicable to interaction design. Creating straightforward and smooth workflows for users of Oracle Applications is a primary goal for my colleagues. We want our users to really enjoy working with our products where it makes them more efficient and better at their jobs. That's our "craveability." Patanjali Venkatacharya asked the panel, "if a design's "craveability" appeals to some cultures but not to others, then what is the impact to the food or product design process?" Rohn stated that "taste is part nature and part nurture" and that the design must take the full context of a product's usage into consideration. Kessler added, "good design is about understanding the context" that the experience necessitates. Seiber remarked how important seat comfort is for diners and how the quality of seating will add so much to the complete dining experience. Sometimes if these non-food factors are not well executed, they can also take away from an otherwise pleasant dining experience. Kessler recounted a time when he was dining at a restaurant that actually had very good food, but the photographs hanging on all the walls did not fit in with the overall décor and created a negative overall dining experience. While the tastiness of the food is critical to a restaurant's success, it is a captivating complete user experience, as in interaction design, which will keep customers coming back and ultimately making the restaurant a hit. Figure 2. Patanjali Venkatacharya enjoyed the Sardinian flatbread salad. As a surprise Chef Powers brought out a signature dish from Shaun's restaurant for all the panelists to sample and critique. The Sardinian flatbread dish showcased Atlanta's taste for fresh and local produce and cheese at its finest as a salad served on a crispy flavorful flat bread. Hardeman said it could be photographed from any angle, a high compliment coming from a food stylist. Seiber really enjoyed the colors that the dish brought together and thought it would be served very well in a casual restaurant on a summer's day. The panel really appreciated the taste and quality of the different components and how the rosemary brought all the flavors together. Seiber remarked that "a lot of effort goes into the appearance of simplicity." Rohn indicated that the same notion holds true with software user interface design. A tremendous amount of work goes into crafting straightforward interfaces, including user research, prototyping, design iterations, and usability studies. Design criticism for food and software interfaces clearly share many similarities. Both areas value expert opinions and user feedback. Both areas understand the importance of great design needing to work well in its context. Last but not least, both food and interaction design criticism value "craveability" and how having users excited about experiencing and enjoying the designs is an important goal. Now if we can just improve the taste of software user interfaces, people may choose to dine on their enterprise applications over a fresh organic salad.

    Read the article

  • APress Deal of the Day - 30/Nov/2011 - Moving to VB .NET Strategies, Concepts, and Code

    - by TATWORTH
    Today's $10 Deal of the day from APress at  is Dan Appleman's "Moving to VB .NET Strategies, Concepts, and Code"."Visual Basic guru Dan Appleman exposes the reality behind the VB .NET hype, and shows you how to evaluate this technology in the context of your specific problems."Considering the vast amount of VB6 still in use, this book from 2001 will be of immense help to all tasked with converting Vb6 to VB.NET or C#.

    Read the article

  • Is RTD Stateless or Stateful?

    - by [email protected]
    Yes.   A stateless service is one where each request is an independent transaction that can be processed by any of the servers in a cluster.  A stateful service is one where state is kept in a server's memory from transaction to transaction, thus necessitating the proper routing of requests to the right server. The main advantage of stateless systems is simplicity of design. The main advantage of stateful systems is performance. I'm often asked whether RTD is a stateless or stateful service, so I wanted to clarify this issue in depth so that RTD's architecture will be properly understood. The short answer is: "RTD can be configured as a stateless or stateful service." The performance difference between stateless and stateful systems can be very significant, and while in a call center implementation it may be reasonable to use a pure stateless configuration, a web implementation that produces thousands of requests per second is practically impossible with a stateless configuration. RTD's performance is orders of magnitude better than most competing systems. RTD was architected from the ground up to achieve this performance. Features like automatic and dynamic compression of prediction models, automatic translation of metadata to machine code, lack of interpreted languages, and separation of model building from decisioning contribute to achieving this performance level. Because  of this focus on performance we decided to have RTD's default configuration work in a stateful manner. By being stateful RTD requests are typically handled in a few milliseconds when repeated requests come to the same session. Now, those readers that have participated in implementations of RTD know that RTD's architecture is also focused on reducing Total Cost of Ownership (TCO) with features like automatic model building, automatic time windows, automatic maintenance of database tables, automatic evaluation of data mining models, automatic management of models partitioned by channel, geography, etcetera, and hot swapping of configurations. How do you reconcile the need for a low TCO and the need for performance? How do you get the performance of a stateful system with the simplicity of a stateless system? The answer is that you make the system behave like a stateless system to the exterior, but you let it automatically take advantage of situations where being stateful is better. For example, one of the advantages of stateless systems is that you can route a message to any server in a cluster, without worrying about sending it to the same server that was handling the session in previous messages. With an RTD stateful configuration you can still route the message to any server in the cluster, so from the point of view of the configuration of other systems, it is the same as a stateless service. The difference though comes in performance, because if the message arrives to the right server, RTD can serve it without any external access to the session's state, thus tremendously reducing processing time. In typical implementations it is not rare to have high percentages of messages routed directly to the right server, while those that are not, are easily handled by forwarding the messages to the right server. This architecture usually provides the best of both worlds with performance and simplicity of configuration.   Configuring RTD as a pure stateless service A pure stateless configuration requires session data to be persisted at the end of handling each and every message and reloading that data at the beginning of handling any new message. This is of course, the root of the inefficiency of these configurations. This is also the reason why many "stateless" implementations actually do keep state to take advantage of a request coming back to the same server. Nevertheless, if the implementation requires a pure stateless decision service, this is easy to configure in RTD. The way to do it is: Mark every Integration Point to Close the session at the end of processing the message In the Session entity persist the session data on closing the session In the session entity check if a persisted version exists and load it An excellent solution for persisting the session data is Oracle Coherence, which provides a high performance, distributed cache that minimizes the performance impact of persisting and reloading the session. Alternatively, the session can be persisted to a local database. An interesting feature of the RTD stateless configuration is that it can cope with serializing concurrent requests for the same session. For example, if a web page produces two requests to the decision service, these requests could come concurrently to the decision services and be handled by different servers. Most stateless implementation would have the two requests step onto each other when saving the state, or fail one of the messages. When properly configured, RTD will make one message wait for the other before processing.   A Word on Context Using the context of a customer interaction typically significantly increases lift. For example, offer success in a call center could double if the context of the call is taken into account. For this reason, it is important to utilize the contextual information in decision making. To make the contextual information available throughout a session it needs to be persisted. When there is a well defined owner for the information then there is no problem because in case of a session restart, the information can be easily retrieved. If there is no official owner of the information, then RTD can be configured to persist this information.   Once again, RTD provides flexibility to ensure high performance when it is adequate to allow for some loss of state in the rare cases of server failure. For example, in a heavy use web site that serves 1000 pages per second the navigation history may be stored in the in memory session. In such sites it is typical that there is no OLTP that stores all the navigation events, therefore if an RTD server were to fail, it would be possible for the navigation to that point to be lost (note that a new session would be immediately established in one of the other servers). In most cases the loss of this navigation information would be acceptable as it would happen rarely. If it is desired to save this information, RTD would persist it every time the visitor navigates to a new page. Note that this practice is preferred whether RTD is configured in a stateless or stateful manner.  

    Read the article

  • Put Unused Tabs on Hold in Firefox

    - by Asian Angel
    If you have a lot of content heavy webpages open in Firefox, it soon adds up on memory usage. The BarTab extension puts unused tabs on hold and keeps them unloaded until you are ready to access them. Before When you have a few tabs open things are not so bad. But if you have something like 30+ tabs open then Firefox is definitely going to have a much larger memory footprint. For the moment all six tabs are active in our example… After Once the extension is installed you can see quite a difference in the tab bar. Five of the six websites are literally on hold and display as about:blank. In the screenshot above all six tabs were restored from a previous session, but to put new tabs on hold the preferences will have to be modified. Notice that you can have active tabs placed on hold if you do not access them within a set time (“x” seconds, minutes, hours, or days). You may also add your favorite websites as exclusions. Newly opened tabs can now be placed on hold until you are ready for them. Need to place a currently accessed tab on hold? Use the tab context menu to unload the page. Once you use the tab context menu to place a tab on hold your browser will shift over to the closest active tab. You will notice the difference in memory usage when you put a lot of intensive pages on hold. Conclusion If you keep a high number of content heavy webpages open in Firefox then the BarTab extension will help reduce memory usage while browsing. Links Download the BarTab extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Quick Tip: Use Tab Characters in Textarea Boxes in FirefoxYou Really Want to Completely Disable Tabs in Firefox?Quick Hits: 11 Firefox Tab How-TosQuick Tip: Save Windows and Tabs When Restarting FirefoxMake Firefox Use Multiple Rows of Tabs TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows

    Read the article

  • Mesa library vs Hardware accelerated OpenGL for my executable - it's just a linking problem?

    - by user827992
    Supposing that i have my program that is targeting a specific OpenGL version, let's say the 3.0, now i want to produce an executable that will support the software rendering with Mesa and another executable that will support the Hardware accelerated context, i can use the same source code for both without expecting any issues ? In another words, the instrunctions in this libraries are the same for my linking purpose ?

    Read the article

  • Android - Create a custom multi-line ListView bound to an ArrayList

    - by Bill Osuch
    The Android HelloListView tutorial shows how to bind a ListView to an array of string objects, but you'll probably outgrow that pretty quickly. This post will show you how to bind the ListView to an ArrayList of custom objects, as well as create a multi-line ListView. Let's say you have some sort of search functionality that returns a list of people, along with addresses and phone numbers. We're going to display that data in three formatted lines for each result, and make it clickable. First, create your new Android project, and create two layout files. Main.xml will probably already be created by default, so paste this in: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"  android:orientation="vertical"  android:layout_width="fill_parent"   android:layout_height="fill_parent">  <TextView   android:layout_height="wrap_content"   android:text="Custom ListView Contents"   android:gravity="center_vertical|center_horizontal"   android:layout_width="fill_parent" />   <ListView    android:id="@+id/ListView01"    android:layout_height="wrap_content"    android:layout_width="fill_parent"/> </LinearLayout> Next, create a layout file called custom_row_view.xml. This layout will be the template for each individual row in the ListView. You can use pretty much any type of layout - Relative, Table, etc., but for this we'll just use Linear: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"  android:orientation="vertical"  android:layout_width="fill_parent"   android:layout_height="fill_parent">   <TextView android:id="@+id/name"   android:textSize="14sp"   android:textStyle="bold"   android:textColor="#FFFF00"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/>  <TextView android:id="@+id/cityState"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/>  <TextView android:id="@+id/phone"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/> </LinearLayout> Now, add an object called SearchResults. Paste this code in: public class SearchResults {  private String name = "";  private String cityState = "";  private String phone = "";  public void setName(String name) {   this.name = name;  }  public String getName() {   return name;  }  public void setCityState(String cityState) {   this.cityState = cityState;  }  public String getCityState() {   return cityState;  }  public void setPhone(String phone) {   this.phone = phone;  }  public String getPhone() {   return phone;  } } This is the class that we'll be filling with our data, and loading into an ArrayList. Next, you'll need a custom adapter. This one just extends the BaseAdapter, but you could extend the ArrayAdapter if you prefer. public class MyCustomBaseAdapter extends BaseAdapter {  private static ArrayList<SearchResults> searchArrayList;    private LayoutInflater mInflater;  public MyCustomBaseAdapter(Context context, ArrayList<SearchResults> results) {   searchArrayList = results;   mInflater = LayoutInflater.from(context);  }  public int getCount() {   return searchArrayList.size();  }  public Object getItem(int position) {   return searchArrayList.get(position);  }  public long getItemId(int position) {   return position;  }  public View getView(int position, View convertView, ViewGroup parent) {   ViewHolder holder;   if (convertView == null) {    convertView = mInflater.inflate(R.layout.custom_row_view, null);    holder = new ViewHolder();    holder.txtName = (TextView) convertView.findViewById(R.id.name);    holder.txtCityState = (TextView) convertView.findViewById(R.id.cityState);    holder.txtPhone = (TextView) convertView.findViewById(R.id.phone);    convertView.setTag(holder);   } else {    holder = (ViewHolder) convertView.getTag();   }      holder.txtName.setText(searchArrayList.get(position).getName());   holder.txtCityState.setText(searchArrayList.get(position).getCityState());   holder.txtPhone.setText(searchArrayList.get(position).getPhone());   return convertView;  }  static class ViewHolder {   TextView txtName;   TextView txtCityState;   TextView txtPhone;  } } (This is basically the same as the List14.java API demo) Finally, we'll wire it all up in the main class file: public class CustomListView extends Activity {     @Override     public void onCreate(Bundle savedInstanceState) {         super.onCreate(savedInstanceState);         setContentView(R.layout.main);                 ArrayList<SearchResults> searchResults = GetSearchResults();                 final ListView lv1 = (ListView) findViewById(R.id.ListView01);         lv1.setAdapter(new MyCustomBaseAdapter(this, searchResults));                 lv1.setOnItemClickListener(new OnItemClickListener() {          @Override          public void onItemClick(AdapterView<?> a, View v, int position, long id) {           Object o = lv1.getItemAtPosition(position);           SearchResults fullObject = (SearchResults)o;           Toast.makeText(ListViewBlogPost.this, "You have chosen: " + " " + fullObject.getName(), Toast.LENGTH_LONG).show();          }          });     }         private ArrayList<SearchResults> GetSearchResults(){      ArrayList<SearchResults> results = new ArrayList<SearchResults>();            SearchResults sr1 = new SearchResults();      sr1.setName("John Smith");      sr1.setCityState("Dallas, TX");      sr1.setPhone("214-555-1234");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Jane Doe");      sr1.setCityState("Atlanta, GA");      sr1.setPhone("469-555-2587");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Steve Young");      sr1.setCityState("Miami, FL");      sr1.setPhone("305-555-7895");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Fred Jones");      sr1.setCityState("Las Vegas, NV");      sr1.setPhone("612-555-8214");      results.add(sr1);            return results;     } } Notice that we first get an ArrayList of SearchResults objects (normally this would be from an external data source...), pass it to the custom adapter, then set up a click listener. The listener gets the item that was clicked, converts it back to a SearchResults object, and does whatever it needs to do. Fire it up in the emulator, and you should wind up with something like this:

    Read the article

  • Files for .NET Montreal and VTCC4 conference

    - by Vincent Grondin
    Hi,  here are the files for both the .NET Montreal presentation made Sept the 24th and at the Vermont Code Camp #4 on Sept the 22nd regarding Architecture problems and solutions linked to EF4.0, Async-await keywords and the Task Parallel Library. This zip file includes both power points in french and english and the DemoApplication which is I REMIND YOU VERY DEMO-WARE and doesn't handle task level exception and context switching.  ZipFile Enjoy

    Read the article

  • OAuth 2.0 for Google Drive and the Adsense API

    OAuth 2.0 for Google Drive and the Adsense API Google engineers Nicolas Garnier, Ali Afshar, and Sergio Gomes discuss the OAuth 2.0 playground and how to use it with the Google Drive And AdSense APIs. OAuth 2.0 and its inner workings are explained in detail, and usage of the OAuth 2.0 playground in context of Google Drive and the AdSense API is demonstrated thoroughly. The sessions wraps up with some discussion of questions from live viewers. From: GoogleDevelopers Views: 9 0 ratings Time: 57:02 More in Science & Technology

    Read the article

  • Working with EO composition associations via ADF BC SDO web services

    - by Chris Muir
    ADF Business Components support the ability to publish the underlying Application Modules (AMs) and View Objects (VOs) as web services through Service Data Objects (SDOs).  This blog post looks at a minor challenge to overcome when using SDOs and Entity Objects (EOs) that use a composition association. Using the default ADF BC EO association behaviour ADF BC components allow you to work with VOs that are based on EOs that are a part of a parent-child composition association.  A composition association enforces that you cannot create records for the child outside the context of the parent.  As example when creating invoice-lines you want to enforce the individual lines have a relating parent invoice record, it just simply doesn't make sense to save invoice-lines without their parent invoice record. In the following screenshot using the ADF BC Tester it demonstrates the correct way to create a child Employees record as part of a composition association with Departments: And the following screenshot shows you the wrong way to create an Employee record: Note the error which is enforced by the composition association: (oracle.jbo.InvalidOwnerException) JBO-25030: Detail entity Employees with row key null cannot find or invalidate its owning entity.  Working with composition associations via the SDO web services  Shay Shmeltzer recently recorded a good video which demonstrates how to expose your ADF Business Components through the SDO interface. On exposing the VOs you get a choice of operation to publish including create, update, delete and more: For example through the SDO test interface we can see that the create operation will request the attributes for the VO exposed, in this case EmployeesView1: In this specific case though, just like the ADF BC Tester, an attempt to create this record will fail with JBO-25030, the composition association is still enforced: The correct way to to do this is through the create operation on the DepartmentsView1 which also lets you create employees record in context of the parent, thus satisfying the composition association rule: Yet at issue here is the create operation will always create both the parent Departments and Employees records.  What do we do if we've already previously created the parent Departments records, and we just want to create additional Employees records for that Department?  The create method of the EmployeeView1 as we saw previously doesn't allow us to do that, the JBO-3050 error will be raised. The solution is the "merge" operation on the parent Departments record: In this case for the Departments record you just need to supply the DepartmentId of the Department you want the Employees record to be associated with, as well as the new Employees record.  When invoked only the Employees record is created, and the supply of the DepartmentId of the Departments record satisfies the composition association without actually creating or updating the associated Department record that already exists in the database. Be warned however if you supply any more attributes for the Department record, it will result in a merge (update) of the associated Departments record too. 

    Read the article

  • How to escape spaces in .desktop files Exec line

    - by nh2
    I want to make a .desktop file like described here. [Desktop Entry] Name=Sublime Text 2 GenericName=Sublime Text 2 Comment=Edit text files Exec=/home/user/opt/sublime/Sublime Text 2/sublime_text %U However, running that from Nautilus's context menu using Open with this gives me Could not find '/home/user/opt/sublime/Sublime' So I tried Exec="/home/user/opt/sublime/Sublime Text 2/sublime_text" %U and got Text ended before matching quote was found for ". (The text was '"/home/user/opt/sublime/Sublime') What is the correct way to escape spaces in the Exec line of .desktop files?

    Read the article

  • Extending the ADF Controller exception handler

    - by frank.nimphius
    The Oracle ADF controller provides a declarative option for developers to define a view activity, method activity or router activity to handle exceptions in bounded or unbounded task flows. Exception handling however is for exceptions only and not handling all types of Throwable. Furthermore, exceptions that occur during the JSF RENDER RESPONSE phase are not looked at either as it is considered too late in the cycle. For developers to try themselves to handle unhandled exceptions in ADF Controller, it is possible to extend the default exception handling, while still leveraging the declarative configuration. To add your own exception handler: · Create a Java class that extends ExceptionHandler · Create a textfile with the name “oracle.adf.view.rich.context.Exceptionhandler” (without the quotes) and store it in .adf\META-INF\services (you need to create the “services” folder) · In the file, add the absolute name of your custom exception handler class (package name and class name without the “.class” extension) For any exception you don't handle in your custom exception handler, just re-throw it for the default handler to give it a try … import oracle.adf.view.rich.context.ExceptionHandler; public class MyCustomExceptionHandler extends ExceptionHandler { public MyCustomExceptionHandler() {      super(); } public void handleException(FacesContext facesContext,                              Throwable throwable, PhaseId phaseId)                              throws Throwable {    String error_message;    error_message = throwable.getMessage();    //check error message and handle it if you can    if( … ){          //handle exception        …    }    else{       //delegate to the default ADFc exception handler        throw throwable;}    } } Note however, that it is recommended to first try and handle exceptions with the ADF Controller default exception handling mechanism. In the past, I've seen attempts on OTN to handle regular application use cases with custom exception handlers for where there was no need to override the exception handler. So don't go for this solution to quickly and always think of alternative solutions. Sometimes a try-catch-final block does it better than sophisticated web exception handling.

    Read the article

  • How can I compile SM 3.0 effects in D3D11 in slimdx?

    - by jacker
    var bytecode = ShaderBytecode.CompileFromFile("shaders\\testShader.fx", "fx_5_0", ShaderFlags.None, SlimDX.D3DCompiler.EffectFlags.None, null, null, out str); var effect = new SlimDX.Direct3D11.Effect(gpu.Device, bytecode); Works fine but if I try to use another shader model like 4.0 or 3.0 it throws an error on the new effect creation: E_FAIL: An undetermined error occurred (-2147467259) How do I compile older shaders? And I've read about device context but I can't find any information on how to use them to maintain DX9 compatibility.

    Read the article

  • What Makes a Good Design Critic? CHI 2010 Panel Review

    - by Applications User Experience
    Author: Daniel Schwartz, Senior Interaction Designer, Oracle Applications User Experience Oracle Applications UX Chief Evangelist Patanjali Venkatacharya organized and moderated an innovative and stimulating panel discussion titled "What Makes a Good Design Critic? Food Design vs. Product Design Criticism" at CHI 2010, the annual ACM Conference on Human Factors in Computing Systems. The panelists included Janice Rohn, VP of User Experience at Experian; Tami Hardeman, a food stylist; Ed Seiber, a restaurant architect and designer; Jonathan Kessler, a food critic and writer at the Atlanta Journal-Constitution; and Larry Powers, Chef de Cuisine at Shaun's restaurant in Atlanta, Georgia. Building off the momentum of his highly acclaimed panel at CHI 2009 on what interaction design can learn from food design (for which I was on the other side as a panelist), Venkatacharya brought together new people with different roles in the restaurant and software interaction design fields. The session was also quite delicious -- but more on that later. Criticism, as it applies to food and product or interaction design, was the tasty topic for this forum and showed that strong parallels exist between food and interaction design criticism. Figure 1. The panelists in discussion: (left to right) Janice Rohn, Ed Seiber, Tami Hardeman, and Jonathan Kessler. The panelists had great insights to share from their respective fields, and they enthusiastically discussed as if they were at a casual collegial dinner. Jonathan Kessler stated that he prefers to have one professional critic's opinion in general than a large sampling of customers, however, "Web sites like Yelp get users excited by the collective approach. People are attracted to things desired by so many." Janice Rohn added that this collective desire was especially true for users of consumer products. Ed Seiber remarked that while people looked to the popular view for their target tastes and product choices, "professional critics like John [Kessler] still hold a big weight on public opinion." Chef Powers indicated that chefs take in feedback from all sources, adding, "word of mouth is very powerful. We also look heavily at the sales of the dishes to see what's moving; what's selling and thus successful." Hearing this discussion validates our design work at Oracle in that we listen to our users (our diners) and industry feedback (our critics) to ensure an optimal user experience of our products. Rohn considers that restaurateur Danny Meyer's book, Setting the Table: The Transforming Power of Hospitality in Business, which is about creating successful restaurant experiences, has many applicable parallels to user experience design. Meyer actually argues that the customer is not always right, but that "they must always feel heard." Seiber agreed, but noted "customers are not designers," and while designers need to listen to customer feedback, it is the designer's job to synthesize it. Seiber feels it's the critic's job to point out when something is missing or not well-prioritized. In interaction design, our challenges are quite similar, if not parallel. Software tasks are like puzzles that are in search of a solution on how to be best completed. As a food stylist, Tami Hardeman has the demanding and challenging task of presenting food to be as delectable as can be. To present food in its best light requires a lot of creativity and insight into consumer tastes. It's no doubt then that this former fashion stylist came up with the ultimate catch phrase to capture the emotion that clients want to draw from their users: "craveability." The phrase was a hit with the audience and panelists alike. Sometime later in the discussion, Seiber remarked, "designers strive to apply craveability to products, and I do so for restaurants in my case." Craveabilty is also very applicable to interaction design. Creating straightforward and smooth workflows for users of Oracle Applications is a primary goal for my colleagues. We want our users to really enjoy working with our products where it makes them more efficient and better at their jobs. That's our "craveability." Patanjali Venkatacharya asked the panel, "if a design's "craveability" appeals to some cultures but not to others, then what is the impact to the food or product design process?" Rohn stated that "taste is part nature and part nurture" and that the design must take the full context of a product's usage into consideration. Kessler added, "good design is about understanding the context" that the experience necessitates. Seiber remarked how important seat comfort is for diners and how the quality of seating will add so much to the complete dining experience. Sometimes if these non-food factors are not well executed, they can also take away from an otherwise pleasant dining experience. Kessler recounted a time when he was dining at a restaurant that actually had very good food, but the photographs hanging on all the walls did not fit in with the overall décor and created a negative overall dining experience. While the tastiness of the food is critical to a restaurant's success, it is a captivating complete user experience, as in interaction design, which will keep customers coming back and ultimately making the restaurant a hit. Figure 2. Patnajali Venkatacharya enjoyed the Sardian flatbread salad. As a surprise Chef Powers brought out a signature dish from Shaun's restaurant for all the panelists to sample and critique. The Sardinian flatbread dish showcased Atlanta's taste for fresh and local produce and cheese at its finest as a salad served on a crispy flavorful flat bread. Hardeman said it could be photographed from any angle, a high compliment coming from a food stylist. Seiber really enjoyed the colors that the dish brought together and thought it would be served very well in a casual restaurant on a summer's day. The panel really appreciated the taste and quality of the different components and how the rosemary brought all the flavors together. Seiber remarked that "a lot of effort goes into the appearance of simplicity." Rohn indicated that the same notion holds true with software user interface design. A tremendous amount of work goes into crafting straightforward interfaces, including user research, prototyping, design iterations, and usability studies. Design criticism for food and software interfaces clearly share many similarities. Both areas value expert opinions and user feedback. Both areas understand the importance of great design needing to work well in its context. Last but not least, both food and interaction design criticism value "craveability" and how having users excited about experiencing and enjoying the designs is an important goal. Now if we can just improve the taste of software user interfaces, people may choose to dine on their enterprise applications over a fresh organic salad.

    Read the article

  • iOS - pass UIImage to shader as texture

    - by martin pilch
    I am trying to pass UIImage to GLSL shader. The fragment shader is: varying highp vec2 textureCoordinate; uniform sampler2D inputImageTexture; uniform sampler2D inputImageTexture2; void main() { highp vec4 color = texture2D(inputImageTexture, textureCoordinate); highp vec4 color2 = texture2D(inputImageTexture2, textureCoordinate); gl_FragColor = color * color2; } What I want to do is send images from camera and do multiply blend with texture. When I just send data from camera, everything is fine. So problem should be with sending another texture to shader. I am doing it this way: - (void)setTexture:(UIImage*)image forUniform:(NSString*)uniform { CGSize sizeOfImage = [image size]; CGFloat scaleOfImage = [image scale]; CGSize pixelSizeOfImage = CGSizeMake(scaleOfImage * sizeOfImage.width, scaleOfImage * sizeOfImage.height); //create context GLubyte * spriteData = (GLubyte *)malloc(pixelSizeOfImage.width * pixelSizeOfImage.height * 4 * sizeof(GLubyte)); CGContextRef spriteContext = CGBitmapContextCreate(spriteData, pixelSizeOfImage.width, pixelSizeOfImage.height, 8, pixelSizeOfImage.width * 4, CGImageGetColorSpace(image.CGImage), kCGImageAlphaPremultipliedLast); //draw image into context CGContextDrawImage(spriteContext, CGRectMake(0.0, 0.0, pixelSizeOfImage.width, pixelSizeOfImage.height), image.CGImage); //get uniform of texture GLuint uniformIndex = glGetUniformLocation(__programPointer, [uniform UTF8String]); //generate texture GLuint textureIndex; glGenTextures(1, &textureIndex); glBindTexture(GL_TEXTURE_2D, textureIndex); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); //create texture glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, pixelSizeOfImage.width, pixelSizeOfImage.height, 0, GL_RGBA, GL_UNSIGNED_BYTE, spriteData); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, textureIndex); //"send" to shader glUniform1i(uniformIndex, 1); free(spriteData); CGContextRelease(spriteContext); } Uniform for texture is fine, glGetUniformLocation function do not returns -1. The texture is PNG file of resolution 2000x2000 pixels. PROBLEM: When the texture is passed to shader, I have got "black screen". Maybe problem are parameters of the CGContext or parameters of the function glTexImage2D Thank you

    Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >