Search Results

Search found 3703 results on 149 pages for 'scroll wheel'.

Page 136/149 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

  • random, Graphics point ,searching- algorithm, via dual for loop set

    - by LoneXcoder
    hello and thanks for joining me in my journey to the custom made algorithm for "guess where the pixel is" this for Loop set (over Point.X, Point.Y), is formed in consecutive/linear form: //Original\initial Location Point initPoint = new Point(150, 100); // No' of pixels to search left off X , and above Y int preXsrchDepth, preYsrchDepth; // No' of pixels to search to the right of X, And Above Y int postXsrchDepth, postYsrchDepth; preXsrchDepth = 10; // will start search at 10 pixels to the left from original X preYsrchDepth = 10; // will start search at 10 pixels above the original Y postXsrchDepth = 10; // will stop search at 10 pixels to the right from X postYsrchDepth = 10; // will stop search at 10 pixels below Y int StopXsearch = initPoint.X + postXsrchDepth; //stops X Loop itarations at initial pointX + depth requested to serch right of it int StopYsearch = initPoint.Y + postYsrchDepth; //stops Y Loop itarations at initial pointY + depth requested below original location int CountDownX, CountDownY; // Optional not requierd for loop but will reports the count down how many iterations left (unless break; triggerd ..uppon success) Point SearchFromPoint = Point.Empty; //the point will be used for (int StartX = initPoint.X - preXsrchDepth; StartX < StopXsearch; StartX++) { SearchFromPoint.X = StartX; for (int StartY = initPoint.Y - preYsrchDepth; StartY < StpY; StartY++) { CountDownX = (initPoint.X - StartX); CountDownY=(initPoint.Y - StartY); SearchFromPoint.Y = StartY; if (SearchSuccess) { same = true; AAdToAppLog("Search Report For: " + imgName + "Search Completed Successfully On Try " + CountDownX + ":" + CountDownY); break; } } } <-10 ---- -5--- -1 X +1--- +5---- +10 what i would like to do is try a way of instead is have a little more clever approach <+8---+5-- -8 -5 -- +2 +10 X -2 - -10 -8-- -6 ---1- -3 | +8 | -10 Y +1 -6 | | +9 .... I do know there's a wheel already invented in this field (even a full-trailer truck amount of wheels (: ) but as a new programmer, I really wanted to start of with a simple way and also related to my field of interest in my project. can anybody show an idea of his, he learnt along the way to Professionalism in algorithm /programming having tests to do on few approaches (kind'a random cleverness...) will absolutely make the day and perhaps help some others viewing this page in the future to come it will be much easier for me to understand if you could use as much as possible similar naming to variables i used or implenet your code example ...it will be Greatly appreciated if used with my code sample, unless my metod is a realy flavorless. p.s i think that(atleast as human being) the tricky part is when throwing inconsecutive numbers you loose track of what you didn't yet use, how do u take care of this too . thanks allot in advance looking forward to your participation !

    Read the article

  • YASR - Yet another search and replace question

    - by petronius31
    Environment: asp.net c# openxml Ok, so I've been reading a ton of snippets and trying to recreate the wheel, but I'm hoping that somone can help me get to my desination faster. I have multiple documents that I need to merge together... check... I'm able to do that with openxml sdk. Birds are singing, sun is shining so far. Now that I have the document the way I want it, I need to search and replace text and/or content controls. I've tried using my own text - {replace this} but when I look at the xml (rename docx to zip and view the file), the { is nowhere near the text. So I either need to know how to protect that within the doucment so they don't diverge or I need to find another way to search and replace. I'm able to search/replace if it is an xml file, but then I'm back to not being able to combine the doucments easily. Code below... and as I mentioned... document merge works fine... just need to replace stuff. protected void exeProcessTheDoc(object sender, EventArgs e) { string doc1 = Server.MapPath("~/Templates/doc1.docx"); string doc2 = Server.MapPath("~/Templates/doc2.docx"); string final_doc = Server.MapPath("~/Templates/extFinal.docx"); File.Delete(final_doc); File.Copy(doc1, final_doc); using (WordprocessingDocument myDoc = WordprocessingDocument.Open(final_doc, true)) { string altChunkId = "AltChunkId2"; MainDocumentPart mainPart = myDoc.MainDocumentPart; AlternativeFormatImportPart chunk = mainPart.AddAlternativeFormatImportPart( AlternativeFormatImportPartType.WordprocessingML, altChunkId); using (FileStream fileStream = File.Open(doc2, FileMode.Open)) chunk.FeedData(fileStream); AltChunk altChunk = new AltChunk(); altChunk.Id = altChunkId; mainPart.Document.Body.InsertAfter(altChunk, mainPart.Document.Body.Elements<Paragraph>().Last()); mainPart.Document.Save(); } exeSearchReplace(final_doc); } protected void exeSearchReplace(string document) { using (WordprocessingDocument wordDoc = WordprocessingDocument.Open(document, true)) { string docText = null; using (StreamReader sr = new StreamReader(wordDoc.MainDocumentPart. GetStream())) { docText = sr.ReadToEnd(); } Regex regexText = new Regex("acvtClientName"); docText = regexText.Replace(docText, "Hi Everyone!"); using (StreamWriter sw = new StreamWriter(wordDoc.MainDocumentPart.GetStream(FileMode.Create))) { sw.Write(docText); } } } } }

    Read the article

  • Find location using only distance and bearing?

    - by pinnacler
    Triangulation works by checking your angle to three KNOWN targets. "I know the that's the Lighthouse of Alexandria, it's located here (X,Y) on a map, and it's to my right at 90 degrees." Repeat 2 more times for different targets and angles. Trilateration works by checking your distance from three KNOWN targets. "I know the that's the Lighthouse of Alexandria, it's located here (X,Y) on a map, and I'm 100 meters away from that." Repeat 2 more times for different targets and ranges. But both of those methods rely on knowing WHAT you're looking at. Say you're in a forest and you can't differentiate between trees, but you know where key trees are. These trees have been hand picked as "landmarks." You have a robot moving through that forest slowly. Do you know of any ways to determine location based solely off of angle and range, exploiting geometry between landmarks? Note, you will see other trees as well, so you won't know which trees are key trees. Ignore the fact that a target may be occluded. Our pre-algorithm takes care of that. 1) If this exists, what's it called? I can't find anything. 2) What do you think the odds are of having two identical location 'hits?' I imagine it's fairly rare. 3) If there are two identical location 'hits,' how can I determine my exact location after I move the robot next. (I assume the chances of having 2 occurrences of EXACT angles in a row, after I reposition the robot, would be statistically impossible, barring a forest growing in rows like corn). Would I just calculate the position again and hope for the best? Or would I somehow incorporate my previous position estimate into my next guess? If this exists, I'd like to read about it, and if not, develop it as a side project. I just don't have time to reinvent the wheel right now, nor have the time to implement this from scratch. So if it doesn't exist, I'll have to figure out another way to localize the robot since that's not the aim of this research, if it does, lets hope it's semi-easy.

    Read the article

  • Available Coroutine Libraries in Java

    - by JUST MY correct OPINION
    I would like to do some stuff in Java that would be clearer if written using concurrent routines, but for which full-on threads are serious overkill. The answer, of course, is the use of coroutines, but there doesn't appear to be any coroutine support in the standard Java libraries and a quick Google on it brings up tantalising hints here or there, but nothing substantial. Here's what I've found so far: JSIM has a coroutine class, but it looks pretty heavyweight and conflates, seemingly, with threads at points. The point of this is to reduce the complexity of full-on threading, not to add to it. Further I'm not sure that the class can be extracted from the library and used independently. Xalan has a coroutine set class that does coroutine-like stuff, but again it's dubious if this can be meaningfully extracted from the overall library. It also looks like it's implemented as a tightly-controlled form of thread pool, not as actual coroutines. There's a Google Code project which looks like what I'm after, but if anything it looks more heavyweight than using threads would be. I'm basically nervous of something that requires software to dynamically change the JVM bytecode at runtime to do its work. This looks like overkill and like something that will cause more problems than coroutines would solve. Further it looks like it doesn't implement the whole coroutine concept. By my glance-over it gives a yield feature that just returns to the invoker. Proper coroutines allow yields to transfer control to any known coroutine directly. Basically this library, heavyweight and scary as it is, only gives you support for iterators, not fully-general coroutines. The promisingly-named Coroutine for Java fails because it's a platform-specific (obviously using JNI) solution. And that's about all I've found. I know about the native JVM support for coroutines in the Da Vinci Machine and I also know about the JNI continuations trick for doing this. These are not really good solutions for me, however, as I would not necessarily have control over which VM or platform my code would run on. (Indeed any bytecode manipulation system would suffer similar problems -- it would be best were this pure Java if possible. Runtime bytecode manipulation would restrict me from using this on Android, for example.) So does anybody have any pointers? Is this even possible? If not, will it be possible in Java 7? Edited to add: Just to ensure that confusion is contained, this is a related question to my other one, but not the same. This one is looking for an existing implementation in a bid to avoid reinventing the wheel unnecessarily. The other one is a question relating to how one would go about implementing coroutines in Java should this question prove unanswerable. The intent is to keep different questions on different threads.

    Read the article

  • Web Services Primer for a WinForms Developer?

    - by Unicorns
    I've been writing client/server applications with Winforms for about six years now, but I have yet to venture into the web space (neither ASP.NET nor web services). Given the direction that the job market has been heading for some time and the fact that I have a basic curiosity, I'd like to get involved with writing web services, but I don't know where to start. I've read about various options (XML/SOAP vs. JSON, REST vs...well, actually I don't know what it's called, etc.), but I'm not sure what sort of criteria are in play when making the determination to use one or the other. Obviously, I'd like to leverage the tools that I have (Visual Studio, the .NET framework, etc.) without hamstringing myself into only targeting a particular audience (i.e. writing the service in such a way as to make it difficult to consume from a Windows Mobile/Android/iPhone client, for example). For the record, my plan--for now--is to use WCF for my web service development, but I'm open to using another .NET approach if that's advisable. I realize that this question is pretty open-ended so it may get closed, but here are some things I'm wondering: What are some things to consider when choosing the type of web service (REST, etc.) I intend to write? Is it possible (and, if so, feasible) to move from one approach to another? Can web services be written in an event-driven way? As I said I'm a Winforms developer, so I'm used to objects raising events for me to react to. For instance, if I have two clients connected to my service, is there a way for me to "push" information to one of them as a result of an action by the other? If this is possible, is this advisable or am I just not thinking about it correctly? What authentication mechanisms seem to work best for public-facing services? What about if I plan to have different types of OS'es and clients connecting to the service? Is there a generally accepted platform-agnostic approach? In the line of authentication, is this something that I should be doing myself (authenticating an managing sessions, etc.) or is this something should be handled at the framework level and I just define exactly how it should work? If that's the case, how do I tell who the requester has authenticated themselves as? I started writing an authentication mechanism (simple username/password combinations stored in the database and a corresponding session table with a GUID key) within my service and just requiring that key to be passed with every operation (other than logging in, of course), but I want to make sure that I'm not reinventing the wheel here. However, I also don't want to clutter up the server with a bunch of machine user accounts just to use Basic authentication. I'm also under the impression that Digest (and of course Windows) authentication requires a machine (or AD) user account.

    Read the article

  • Strange behaviour when posting CGEvent to PSN

    - by Ben Packard
    If I set up a loop that posts some keyboard events to a PSN, I find that it works fine except for when first launched. The event only seems to post when i do something with the mouse manually - even just moving it slightly. Here's the details, if they help. An external application has a list box of text lines, which I am reading by posting copy commands (and checking the pasteboard). Unfortunately this is my only way to get this text. Sometimes, the application pulls focus away from the list, which I can detect. When this happens, the most reliable way to return focus is by sending a mouse event to click on a text field directly above the list, then send a 'tab' keyboard event to shift the focus onto the list. So at launch, the loop runs fine, scrolling down the list and copying the text. When focus is shifted away, its is detected fine, and the events are sent to move focus back to the list. But nothing seems to happen. The loop continues detecting that focus has changed, but the events only work once I move the mouse. Or even just use the scroll wheel. Strange. Once this has happened the first time, it works fine - each time focus moves, the PSN events switch it back without me having to do anything at all. Here's the code that runs in the loop - verified as working: //copy to pasteboard - CMD-V e3 = CGEventCreateKeyboardEvent(NULL, (CGKeyCode)8, true); CGEventSetFlags(e3, kCGEventFlagMaskCommand); CGEventPostToPSN(&psn, e3); CFRelease(e3); e4 = CGEventCreateKeyboardEvent(NULL, (CGKeyCode)8, false); CGEventPostToPSN(&psn, e4); CFRelease(e4); //move cursor down e1 = CGEventCreateKeyboardEvent(NULL, (CGKeyCode)125, true); CGEventPostToPSN(&psn, e1); CFRelease(e1); e2 = CGEventCreateKeyboardEvent(NULL, (CGKeyCode)125, false); CGEventPostToPSN(&psn, e2); CFRelease(e2); And here's where I switch focus, also working (except when first required): //click in text input box - point is derived earlier e6 = CGEventCreateMouseEvent(NULL, kCGEventLeftMouseDown, point, 0); CGEventPostToPSN(&psn, e6); CFRelease(e6); e7 = CGEventCreateMouseEvent(NULL, kCGEventLeftMouseUp, point, 0); CGEventPostToPSN(&psn, e7); CFRelease(e7); //press tab key to move to chat log table CGEventRef e = CGEventCreateKeyboardEvent(NULL, (CGKeyCode)48, true); //CGEventPost(kCGSessionEventTap, e); CGEventPostToPSN(&psn, e); CFRelease(e); CGEventRef e11 = CGEventCreateKeyboardEvent(NULL, (CGKeyCode)48, false); CGEventPostToPSN(&psn, e11); CFRelease(e11);

    Read the article

  • Design Technique: How to design a complex system for processing orders, products and units.

    - by Shyam
    Hi, Programming is fun: I learned that by trying out simple challenges, reading up some books and following some tutorials. I am able to grasp the concepts of writing with OO (I do so in Ruby), and write a bit of code myself. What bugs me though is that I feel re-inventing the wheel: I haven't followed an education or found a book (a free one that is) that explains me the why's instead of the how's, and I've learned from the A-team that it is the plan that makes it come together. So, armed with my nuby Ruby skills, I decided I wanted to program a virtual store. I figured out the following: My virtual Store will have: Products and Services Inventories Orders and Shipping Customers Now this isn't complex at all. With the help of some cool tools (CMapTools), I drew out some concepts, but quickly enough (thanks to my inferior experience in designing), my design started to bite me. My very first product-line were virtual "laptops". So, I created a class (Ruby): class Product attr_accessor :name, :price def initialize(name, price) @name = name @price = price end end which can be instantiated by doing (IRb) x = Product.new("Banana Pro", 250) Since I want my virtual customers to be able to purchase more than one product, or various types, I figured out I needed some kind of "Order" mechanism. class Order def initialize(order_no) @order_no = order_no @line_items = [] end def add_product(myproduct) @line_items << myproduct end def show_order() puts @order_no @line_items.each do |x| puts x.name.to_s + "\t" + x.price.to_s end end end that can be instantiated by doing (IRb) z = Order.new(1234) z.add_product(x) z.show_order Splendid, I have now a very simple ordering system that allows me to add products to an order. But, here comes my real question. What if I have three models of my product (economy, business, showoff)? Or have my products be composed out of separate units (bigger screen, nicer keyboard, different OS)? Surely I could make them three separate products, or add complexity to my product class, but I am looking for are best practices to design a flexible product object that can be used in the real world, to facilitate a complex system. My apologies if my grammar and my spelling are with error, as english is not my first language and I took the time to check as far I could understand and translate properly! Thank you for your answers, comments and feedback!

    Read the article

  • Chrome Problems on Windows 8

    - by Akshat Mittal
    There are a lot of problems with Chrome (24.0.1312.14 beta || But all this happened before update also) on Windows 8. Problems and explanations are listed below: Google Chrome re-draw time: When I switch tabs, the window retains the content of the previous tab and displays that even if I move my mouse, if only refreshes (re-draws) when there is a change on the webpage (like on hover) or I do a select all (or scroll). One thing to note is that the hover and select happens on the real page and not the retained image-like thing of the older webpage. Chrome is slow and laggy: Websites such as Facebook and Twitter (and more) have gone extremely laggy on Chrome (Win 8). When I was using Windows 7, I never experienced a lag or something. Also when using HTML-5 Websites, the transition (the -webkit-transition in CSS) goes extremely slow at times. Plugins Crash: Plugins like Flash Player, Shockwave Player, and more that are in-built into Chrome Crashes a lot, even when doing simple tasks like playing YouTube Videos, displaying ads or something. Chrome Crashes: Chrome has crashed over 100 times in the past month. Google Chrome just crashes randomly or I don't know the reason. Random Page crashes: Chrome results chrome://crash/(Copy-Paste this in address bar) on random pages even when the page is just loaded, I understand that this can happen on heavy HTML5 or JS websites but what about HTML only websites! Most of the things above happens on Super User also, Super User never had any problem when using Chrome on Windows 7. UPDATE 1: @magicandre1981 Commented for trying to disable Hardware Acceleration. I tried it, it somewhat solved the problem but din't fix it. I am still experiencing all the above issues but less frequently (maybe because Chrome Restarted Completely) UPDATE 2: @avirk asked me to try a Stable Version of Chrome and Firefox, I din't experience any lag in Firefox, a little (negligible) lag in Chrome 22 (Maybe because its a new copy of Chrome, I haven't used it much). Is anybody else experiencing such issues? Does anybody has a solution to any of these? Any Help is appreciated! Thank You!

    Read the article

  • Looking for RESTful Suggestions In Porting ASP.NET to MVC.NET

    - by DaveDev
    I've been tasked with porting/refactoring a Web Application Platform that we have from ASP.NET to MVC.NET. Ideally I could use all the existing platform's configurations to determine the properties of the site that is presented. Is it RESTful to keep a SiteConfiguration object which contains all of our various page configuration data in the System.Web.Caching.Cache? There are a lot of settings that need to be loaded when the user acceses our site so it's inefficient for each user to have to load the same settings every time they access. Some data the SiteConfiguration object contains is as follows and it determines what Master Page / site configuration / style / UserControls are available to the client, public string SiteTheme { get; set; } public string Region { private get; set; } public string DateFormat { get; set; } public string NumberFormat { get; set; } public int WrapperType { private get; set; } public string LabelFileName { get; set; } public LabelFile LabelFile { get; set; } // the following two are the heavy ones // PageConfiguration contains lots of configuration data for each panel on the page public IList<PageConfiguration> Pages { get; set; } // This contains all the configurations for the factsheets we produce public List<ConfiguredFactsheet> ConfiguredFactsheets { get; set; } I was thinking of having a URL structure like this: www.MySite1.com/PageTemplate/UserControl/ the domain determines the SiteConfiguration object that is created, where MySite1.com is SiteId = 1, MySite2.com is SiteId = 2. (and in turn, style, configurations for various pages, etc.) PageTemplate is the View that will be rendered and simply defines a layout for where I'm going to inject the UserControls Can somebody please tell me if I'm completely missing the RESTful point here? I'd like to refactor the platform into MVC because it's better to work in but I want to do it right but with a minimum of reinventing-the-wheel because otherwise it won't get approval. Any suggestions otherwise? Thanks

    Read the article

  • libreadline history lines combine

    - by jettero
    This has been driving me crazy for about three years. I don't know how to fully describe the problem, but I think I can finally describe a way to recreate it. Your milage may vary. I have a mixture of ubuntu server and desktop machines of various versions and a few gentoo machines with various states of disrepair. They all seem to kindof do their own thing, although with similarities. Try this and let me know if you see the same thing. pop open two xterms (TERM=xterm) resize one so they're not the same issue screen -R test1 in one (TERM=screen) and screen -x test1 in the other hooray, typing in one shows up in the other; although notice that their different size produces artifacts and things issue a couple commands in your shell hit ^AF in the one that doesn't fit quite right, now it fits!! scroll back over the history a little goto 6 Eventually you'll notice a couple history lines combine. If you don't, then it's something unique to my setup, which spans various distributions and computers; so that's a confusing concept to me. If you see the thing I'm seeing then this: bash$ ls -al bash$ ps auxfw becomes this: bash$ ls -al; ps auxfw It doesn't happen every time. I have to really play with it — unless I don't want it to happen, then it always does. On some systems (or combinations), I get a line separator like the example above. On some systems, I do not. That I get the line separator on some systems seems to indicate to me that bash supports this behavior. Its history is entirely handled by libreadline and after perusing (ie, carefully reading) the man pages, I couldn't find a single readline setting for combining two history lines. Nor can I find anything in the bash manpage. So, how can I invoke this on purpose? Or, if I can't do that, how can I disable it completely? I would take either answer as a solution. Currently, I only see it when I don't want it.

    Read the article

  • Calculating rotation and translation matrices between two odometry positions for monocular linear triangulation

    - by user1298891
    Recently I've been trying to implement a system to identify and triangulate the 3D position of an object in a robotic system. The general outline of the process goes as follows: Identify the object using SURF matching, from a set of "training" images to the actual live feed from the camera Move/rotate the robot a certain amount Identify the object using SURF again in this new view Now I have: a set of corresponding 2D points (same object from the two different views), two odometry locations (position + orientation), and camera intrinsics (focal length, principal point, etc.) since it's been calibrated beforehand, so I should be able to create the 2 projection matrices and triangulate using a basic linear triangulation method as in Hartley & Zissermann's book Multiple View Geometry, pg. 312. Solve the AX = 0 equation for each of the corresponding 2D points, then take the average In practice, the triangulation only works when there's almost no change in rotation; if the robot even rotates a slight bit while moving (due to e.g. wheel slippage) then the estimate is way off. This also applies for simulation. Since I can only post two hyperlinks, here's a link to a page with images from the simulation (on the map, the red square is simulated robot position and orientation, and the yellow square is estimated position of the object using linear triangulation.) So you can see that the estimate is thrown way off even by a little rotation, as in Position 2 on that page (that was 15 degrees; if I rotate it any more then the estimate is completely off the map), even in a simulated environment where a perfect calibration matrix is known. In a real environment when I actually move around with the robot, it's worse. There aren't any problems with obtaining point correspondences, nor with actually solving the AX = 0 equation once I compute the A matrix, so I figure it probably has to do with how I'm setting up the two camera projection matrices, specifically how I'm calculating the translation and rotation matrices from the position/orientation info I have relative to the world frame. How I'm doing that right now is: Rotation matrix is composed by creating a 1x3 matrix [0, (change in orientation angle), 0] and then converting that to a 3x3 one using OpenCV's Rodrigues function Translation matrix is composed by rotating the two points (start angle) degrees and then subtracting the final position from the initial position, in order to get the robot's straight and lateral movement relative to its starting orientation Which results in the first projection matrix being K [I | 0] and the second being K [R | T], with R and T calculated as described above. Is there anything I'm doing really wrong here? Or could it possibly be some other problem? Any help would be greatly appreciated.

    Read the article

  • compressed archive with quick access to individual file

    - by eric.frederich
    I need to come up with a file format for new application I am writing. This file will need to hold a bunch other text files which are mostly text but can be other formats as well. Naturally, a compressed tar file seems to fit the bill. The problem is that I want to be able to retrieve some data from the file very quickly and getting just a particular file from a tar.gz file seems to take longer than it should. I am assumeing that this is because it has to decompress the entire file even though I just want one. When I have just a regular uncompressed tar file I can get that data real quick. Lets say the file I need quickly is called data.dat For example the command... tar -x data.dat -zf myfile.tar.gz ... is what takes a lot longer than I'd like. MP3 files have id3 data and jpeg files have exif data that can be read in quickly without opening the entire file. I would like my data.dat file to be available in a similar way. I was thinking that I could leave it uncompressed and seperate from the rest of the files in myfile.tar.gz I could then create a tar file of data.dat and myfile.tar.gz and then hopefully that data would be able to be retrieved faster because it is at the head of outer tar file and is uncompressed. Does this sound right?... putting a compressed tar inside of a tar file? Basically, my need is to have an archive type of file with quick access to one particular file. Tar does this just fine, but I'd also like to have that data compressed and as soon as I do that, I no longer have quick access. Are there other archive formats that will give me that quick access I need? As a side note, this application will be written in Python. If the solution calls for a re-invention of the wheel with my own binary format I am familiar with C and would have no problem writing the Python module in C. Idealy I'd just use tar, dd, cat, gzip, etc though. Thanks, ~Eric

    Read the article

  • Google maps sometimes does not return a geocoded value for string

    - by XGreen
    Hi Guys, I have the following code: It basically looks into a HTML list and geocodes and markets each item. it does it correctly 8 out of ten but sometimes I get an error I set for show in the console. I can't think of anything. Any thoughts is much appreciated. $(function () { var map = null; var geocoder = null; function initialize() { if (GBrowserIsCompatible()) { // Specifies that the element with the ID map is the container for the map map = new GMap2(document.getElementById("map")); // Sets an initial map positon (which mainly gets ignored after reading the adderesses list) map.setCenter(new GLatLng(37.4419, -122.1419), 13); // Instatiates the google Geocoder class geocoder = new GClientGeocoder(); map.addControl(new GSmallMapControl()); // Sets map zooming controls on the map map.enableScrollWheelZoom(); // Allows the mouse wheel to control the map while on it } } function showAddress(address, linkHTML) { if (geocoder) { geocoder.getLatLng(address, function (point) { if (!point) { console.log('Geocoder did not return a location for ' + address); } else { map.setCenter(point, 8); var marker = new GMarker(point); map.addOverlay(marker); // Assigns the click event to each marker to open its balloon GEvent.addListener(marker, "click", function () { marker.openInfoWindowHtml(linkHTML); }); } } ); } } // end of show address function initialize(); // This iterates through the text of each address and tells the map // to show its location on the map. An internal error is thrown if // the location is not found. $.each($('.addresses li a'), function () { var addressAnchor = $(this); showAddress(addressAnchor.text(), $(this).parent().html()); }); }); which looks into this HTML: <ul class="addresses"> <li><a href="#">Central London</a></li> <li><a href="#">London WC1</a></li> <li><a href="#">London Shoreditch</a></li> <li><a href="#">London EC1</a></li> <li><a href="#">London EC2</a></li> <li><a href="#">London EC3</a></li> <li><a href="#">London EC4</a></li> </ul>

    Read the article

  • Blit Queue Optimization Algorithm

    - by martona
    I'm looking to implement a module that manages a blit queue. There's a single surface, and portions of this surface (bounded by rectangles) are copied to elsewhere within the surface: add_blt(rect src, point dst); There can be any number of operations posted, in order, to the queue. Eventually the user of the queue will stop posting blits, and ask for an optimal set of operations to actually perform on the surface. The task of the module is to ensure that no pixel is copied unnecessarily. This gets tricky because of overlaps of course. A blit could re-blit a previously copied pixel. Ideally blit operations would be subdivided in the optimization phase in such a way that every block goes to its final place with a single operation. It's tricky but not impossible to put this together. I'm just trying to not reinvent the wheel. I looked around on the 'net, and the only thing I found was the SDL_BlitPool Library which assumes that the source surface differs from the destination. It also does a lot of grunt work, seemingly unnecessarily: regions and similar building blocks are a given. I'm looking for something higher-level. Of course, I'm not going to look a gift horse in the mouth, and I also don't mind doing actual work... If someone can come forward with a basic idea that makes this problem seem less complex than it does right now, that'd be awesome too. EDIT: Thinking about aaronasterling's answer... could this work? Implement customized region handler code that can maintain metadata for every rectangle it contains. When the region handler splits up a rectangle, it will automatically associate the metadata of this rectangle with the resulting sub-rectangles. When the optimization run starts, create an empty region handled by the above customized code, call this the master region Iterate through the blt queue, and for every entry: Let srcrect be the source rectangle for the blt beng examined Get the intersection of srcrect and master region into temp region Remove temp region from master region, so master region no longer covers temp region Promote srcrect to a region (srcrgn) and subtract temp region from it Offset temp region and srcrgn with the vector of the current blt: their union will cover the destination area of the current blt Add to master region all rects in temp region, retaining the original source metadata (step one of adding the current blt to the master region) Add to master region all rects in srcrgn, adding the source information for the current blt (step two of adding the current blt to the master region) Optimize master region by checking if adjacent sub-rectangles that are merge candidates have the same metadata. Two sub-rectangles are merge candidates if (r1.x1 == r2.x1 && r1.x2 == r2.x2) | (r1.y1 == r2.y1 && r1.y2 == r2.y2). If yes, combine them. Enumerate master region's sub-rectangles. Every rectangle returned is an optimized blt operation destination. The associated metadata is the blt operation`s source.

    Read the article

  • Issues with subnavigation menus changing positions when using CSS in IE7

    - by Jacinda Littlefield
    The subnavigation menus (located just below the blue tabbed navigation) are showing up in a different position in IE7--they display correctly in Firefox and IE8: https://www.diservio.com/newsite/vehicle/auto-insurance.html I created a separate IE7 CSS file and added conditional comments in the HTML. Here are the properties I modified: topnav {padding-bottom: 10px;} subnavbg h3 {margin: -663px 0 0 -340px;} subnavmenu ul {margin: -663px 0 0 -340px;} leftsubnav {MARGIN: -601px 0 0 -550px;} Here's a portion of what the HTML looks like--all of the divs are nested inside the main div #container (not displayed): <div id="subplacement"> <div id="maincontent"> ... <h1>Auto Insurance</h1> <p>At Tony DiServio Insurance we know how important it is for you to protect yourself and your loved ones when you get behind the wheel.</p> </div> </div> ... <div id="subnavmenu"> <ul> <li><a href="auto-insurance.html" id="autolink" title="Auto Insurance Link"><span>Auto</span></a></li> <li><a href="motorcycle-insurance.html" id="cyclelink" title="Motorcycle Insurance Link"><span>Motorcycle</span></a></li> <li><a href="boat-insurance.html" id="boatlink" title="Boat Insurance Link"><span>Boat</span></a></li> </ul> </div> <div id="leftsubnav"> <ul> <li><a href="auto-coverage.html" id="coverlink" title="Coverage Link"><span>Coverage</span></a></li> </ul> </div> </div> The submenus are also bounced into different positions on the Home Vehicle page and Vehicle Auto Insurance Auto Coverage page. I can't figure out why. Any suggestions on what I need to fix for IE7?

    Read the article

  • Possible HDD malfunction. Need help in diagnosing

    - by Protheus
    Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

    Read the article

  • Suggestions In Porting ASP.NET to MVC.NET - Is storing SiteConfiguration in Cache RESTful?

    - by DaveDev
    I've been tasked with porting/refactoring a Web Application Platform that we have from ASP.NET to MVC.NET. Ideally I could use all the existing platform's configurations to determine the properties of the site that is presented. Is it RESTful to keep a SiteConfiguration object which contains all of our various page configuration data in the System.Web.Caching.Cache? There are a lot of settings that need to be loaded when the user acceses our site so it's inefficient for each user to have to load the same settings every time they access. Some data the SiteConfiguration object contains is as follows and it determines what Master Page / site configuration / style / UserControls are available to the client, public string SiteTheme { get; set; } public string Region { private get; set; } public string DateFormat { get; set; } public string NumberFormat { get; set; } public int WrapperType { private get; set; } public string LabelFileName { get; set; } public LabelFile LabelFile { get; set; } // the following two are the heavy ones // PageConfiguration contains lots of configuration data for each panel on the page public IList<PageConfiguration> Pages { get; set; } // This contains all the configurations for the factsheets we produce public List<ConfiguredFactsheet> ConfiguredFactsheets { get; set; } I was thinking of having a URL structure like this: www.MySite1.com/PageTemplate/UserControl/ the domain determines the SiteConfiguration object that is created, where MySite1.com is SiteId = 1, MySite2.com is SiteId = 2. (and in turn, style, configurations for various pages, etc.) PageTemplate is the View that will be rendered and simply defines a layout for where I'm going to inject the UserControls Can somebody please tell me if I'm completely missing the RESTful point here? I'd like to refactor the platform into MVC because it's better to work in but I want to do it right but with a minimum of reinventing-the-wheel because otherwise it won't get approval. Any suggestions otherwise? Thanks

    Read the article

  • How do you return a string from a function correctly in Dynamic C?

    - by aquanar
    I have a program I am trying to debug, but Dynamic C apparently treats strings differently than normal C does (well, character arrays, anyway). I have a function that I made to make an 8 character long (well, 10 to include the \0 ) string of 0s and 1s to show me the contents of an 8-bit char variable. (IE, I give it the number 13, it returns the string "0001101\0" ) When I use the code below, it prints out !{happy face] 6 times (well, the second one is the happy face alone for some reason), each return comes back as 0xDEAE or "!\x02. I thought it would dereference it and return the appropriate string, but it appears to just be sending the pointer and attempting to parse it. This may seem silly, but my experience was actually in C++ and Java, so going back to C brings up a few issues that were dealt with in later programming languages that I'm not entirely sure how to deal with (like the lack of string variables). How could I fix this code, or how would be a better way to do what I am trying to do (I thought maybe sending in a pointer to a character array and working on it from the function might work, but I thought I should ask to see if maybe I'm just trying to reinvent the wheel). Currently I have it set up like this: this is an excerpt from the main() display[0] = '\0'; for(i=0;i<6;i++) { sprintf(s, "%s ", *char_to_bits(buffer[i])); strcat(display, s); } DispStr(8,5, display); and this is the offending function: char *char_to_bits(char x) { char bits[16]; strcpy(bits,"00000000\0"); if (x & 0x01) bits[7]='1'; if (x & 0x02) bits[6]='1'; if (x & 0x04) bits[5]='1'; if (x & 0x08) bits[4]='1'; if (x & 0x10) bits[3]='1'; if (x & 0x20) bits[2]='1'; if (x & 0x40) bits[1]='1'; if (x & 0x80) bits[0]='1'; return bits; } and just for the sake of completion, the other function is used to output to the stdio window at a specific location: void DispStr(int x, int y, char *s) { x += 0x20; y += 0x20; printf ("\x1B=%c%c%s", x, y, s); }

    Read the article

  • Need help troubleshooting highly variable ping times

    - by Elliot.Bradshaw
    I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

    Read the article

  • Dealing with C++ web views

    - by Jeffrey
    I'm working, as an hobby (before any one rage out of their mind, I'm just trying to study C++ regarding something I love: web. I'm not trying to reinvent your precious wheel, and I'm not trying to create the new web technology. I just have the time to go for it.), creating a web CGI C++ library. I'm at a pretty good point, but in the future I see one big problem: views. I'm used to the great <body><?php echo "Hey!"; ?></body> embedded php, but there's no such thing in C++, so I'm wondering: How would you deal with views? Would you create a simple find-replace-variable templating system and deal with thousands of partial views? For example: View view; view.load("header.html"); view.load("nav.html"); view.load("post_start.html"); for (int i = 0; i < 10; i++) { std::map<std::string, std::string> post; Post p(i); post = p.get(); view.load(post_view.html, post); // p is passed as argument and every `{% varname %}` in the html will be replaced with its value inside the map } view.load(post_end.html); view.load(footer); Would you create a simple templating system? So that we can deal with this C++ code: std::vector<std::map<std::string, std::string>> posts; Posts p; posts = p.getAll(); view.load(posts.html, posts); and then this HTML/TPL: <html> ... <body> <h2> Posts </h2> {% for (i = 0; i < 10; i++): %} <div class="post">...</div> {% endfor %} </body> </html> Is there any other way? What is the best way to do this? (And no, I don't think this is subjective question)

    Read the article

  • Writing OpenGL enabled GUI

    - by Jaen
    I am exploring a possibility to write a kind of a notebook analogue that would reproduce the look and feel of using a traditional notebook, but with the added benefit of customizing the page in ways you can't do on paper - ask the program to lay ruled paper here, grid paper there, paste an image, insert a recording from the built-in camera, try to do handwriting recognition on the tablet input, insert some latex for neat formulas and so on. I'm pretty interested in developing it just to see if writing notes on computer can come anywhere close to the comfort plain paper + pencil offer (hard to do IMO) and can always turn it in as a university C++ project, so double gain there. Coming from the type of project there are certain requirements for the user interface: the user will be able to zoom, move and rotate the notebook as he wishes and I think it's pretty sensible delegate it to OpenGL, so the prospective GUI needs to work well with OGL (preferably being rendered in it) the interface should be navigable with as little of keyboard input as user wishes (incorporating some sort of gestures maybe) up to limiting the keyboard keys as modifiers to the pen movements and taps; this includes tablet and possible multitouch support the interface should keep out of the way where not needed and come up where needed and be easily layerable the notebook sheet itself will be a container for objects representing the notebook blurbs, so it would be nice if the GUI would be able to overlay some frames over the exact parts of the OpenGL-drawn sheet to signify what can be done with given part (like moving, rotating, deleting, copying, editing etc.) and it's extents In terms of interface it's probably going to end up similar to Alias' Sketch Book Pro: [picture][http://1.bp.blogspot.com/_GGxlzvZW-CY/SeKYA_oBdSI/AAAAAAAAErE/J6A0kyXiuqA/s400/Autodesk_Alias_SketchBook_Pro_2.jpg] As far as toolkits go I'm considering Qt and nui, but I'm not really aware how well would they match up the requirements and how well would they handle such an application. As far as I know you can somehow coerce Qt into doing widget drawing with OpenGL, but on the other hand I heard voices it's slot-signal framework isn't exactly optimal and requires it's own preprocessor and I don't know how hard would be to do all the custom widgets I would need (say color-wheel, ruler, blurb frames, blurb selection, tablet-targeted pop-up menu etc.) in the constraints of Qt. Also quite a few Qt programs I've had on my machine seemed really sluggish, but it may be attributed to me having old PC or programmers using Qt suboptimally rather to the framework itself. As for [nui][http://www.libnui.net/] I know it's also cross-platform and all of the basic things you would require of a GUI toolkit and what is the biggest plus it is OpenGL-enabled from the start, but I don't know how it is with custom widgets and other facets and it certainly has smaller userbase and less elaborate documentation than Qt. The question goes as this: Does any of these toolkits fulfill (preferably all of) the requirements or there is a well fitting toolkit I haven't come across or maybe I should just roll up my sleeves, get SFML (or maybe Clutter would be more suited to this?) and something like FastDelegates or libsigc++ and program the GUI framework from the ground up myself? I would be very glad if anyone had experience with a similar GUI project and can offer some comments on how well these toolkits hold up or is it worthwhile to pursue own GUI toolkit in this case. Sorry for longwindedness, duh.

    Read the article

  • Jquery load() loading more than I want...

    - by Probocop
    Hi, I am trying to load just the contents of a <div> into another <div> on the same page using a jquery function. But when the function triggers, it loads the entire <HTML> document into the specified <div>. Any idea why it would be doing this? My code is as follows: Jquery: function button1() { $('#sidebar-content').fadeOut(function() { $(this).load('#button1').fadeIn(); }); } function button2() { $('#sidebar-content').fadeOut(function() { $(this).load('#button2').fadeIn(); }); } HTML: <div id="content-holder"> <div id="main-content" class="float-holder"> <div id="inner"> <h1>BRAND TRUTH</h1> <div id="flashcontent"> <div id="button1"> <div id="content"> <h1>Brand Truth</h1> <p>What this basically means is our way of working, the process involved by both ourselves and our client.</p> <p>When the truth wheel process is followed, the end result is so much stronger.</p> </div> </div> <div id="button2"> <div id="content"> <h1>Button 2 Content</h1> <p>Some other content</p> <p>Some other content x2</p> </div> </div> </div> <script type="text/javascript"> // <![CDATA[ var so = new SWFObject("working.swf", "working", "400", "400", "9", "#FFFFFF"); so.write("flashcontent"); // ]]> </script> </div> <div id="sidebar"> <div id="sidebar-content"> Replace Content Here! </div> </div> </div><!-- end #main-content --> </div><!-- end #content-holder -->

    Read the article

  • Remove Office 2010 Beta and Reinstall Office 2007

    - by Matthew Guay
    Have you tried out the Office 2010 beta, but want to go back to Office 2007?  Here’s a step-by-step tutorial on how to remove your Office 2010 beta and reinstall your Office 2007. The Office 2010 beta will expire on October 31, 2010, at which time you may see a dialog like the one below.  At that time, you will need to either upgrade to the final release of Office 2010, or reinstall your previous version of Office. Our computer was running the Office 2010 Home and Business Click to Run beta, and after uninstalling it we reinstalled Office 2007 Home and Student.  This was a Windows Vista computer, but the process will be exactly the same on Windows XP, Vista, or Windows 7.  Additionally, the process to reinstall Office 2007 will be exactly the same regardless of the edition of Office 2007 you’re using. However, please note that if you are running a different edition of Office 2010, especially the 64 bit version, the process may be slightly different.  We will cover this scenario in another article. Remove Office 2010 Click to Run Beta: To remove Office 2010 Click to Run Beta, open Control Panel and select Uninstall a Program. If your computer is running Windows 7, enter “Uninstall a program” in your Start menu search. Scroll down, select “Microsoft Office Click-to-Run 2010 (Beta)”, and click the Uninstall button on the toolbar.  Note that there will be two entries for Office, so make sure to select the “Click-to-Run” entry. This will automatically remove all of Office 2010 and its components.  Click Yes to confirm you want to remove it. Office 2010 beta uninstalled fairly quickly, and a reboot will be required.  Once your computer is rebooted, Office 2010 will be entirely removed. Reinstall Office 2007 Now, you’re to the easy part.  Simply insert your Office 2007 CD, and it should automatically startup the setup.  If not, open Computer and double-click on your CD drive.   Now, double-click on setup.exe to start the installation. Enter your product key, and click Continue…   Click Install Now, or click Customize if you want to change the default installation settings. Wait while Office 2007 installs…it takes around 15 to 20 minutes in our experience.  Once it’s finished  close the installer. Now, open one of the Office applications.  A popup will open asking you to activate Office.  Make sure you’re connected to the internet, and click next; otherwise, you can select to activate over the phone if you do not have internet access. This should only take a minute, and Office 2007 will be activated and ready to run. Everything should work just as it did before you installed Office 2010.  Enjoy! Office Updates Make sure to install the latest updates for Office 2007, as these are not included in your disk.  Check Windows Update (search for Windows Update in the Start menu search), and install all of the available updates for Office 2007, including Service Pack 2. Conclusion This is a great way to keep using Office even if you don’t decide to purchase Office 2010 after it is released.  Additionally, if you’re were using another version of Office, such as Office 2003, then reinstall it as normal after following the steps to remove Office 2010. Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteDetect and Repair Applications In Microsoft Office 2007Save and Restore Your Microsoft Office SettingsDisable Office 2010 Beta Send-a-Smile from StartupHow to See the About Dialog and Version Information in Office 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows

    Read the article

  • Linux fsck.ext3 says "Device or resource busy" although I did not mount the disk.

    - by matnagel
    I am running an ubuntu 8.04 server instance with a 8GB virtual disk on vmware 1.0.9. For disk maintenance I made a copy of the virtual disk (by making a copy of the 2 vmdk files of sda on the stopped vm on the host) and added it to the original vm. Now this vm has it's original virtual disk sda plus a 1:1 copy (sdd). There are 2 additional disk sdb and sdc which I ignore.) I would expect sdb not to be mounted when I start the vm. So I try tp do a ext2 fsck on sdd from the running vm, but it reports fsck reported that sdb was mounted. $ sudo fsck.ext3 -b 8193 /dev/sdd e2fsck 1.40.8 (13-Mar-2008) fsck.ext3: Device or resource busy while trying to open /dev/sdd Filesystem mounted or opened exclusively by another program? The "mount" command does not tell me sdd is mounted: $ sudo mount /dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) /sys on /sys type sysfs (rw,noexec,nosuid,nodev) varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755) varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777) udev on /dev type tmpfs (rw,mode=0755) devshm on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdc1 on /mnt/r1 type ext3 (rw,relatime,errors=remount-ro) /dev/sdb1 on /mnt/k1 type ext3 (rw,relatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw) When I ignore the warning and continue the fsck, it reported many errors. How do I get this under control? Is there a better way to figure out if sdd is mounted? Or how is it "busy? How to unmount it then? How to prevent ubuntu from automatically mounting. Or is there something else I am missing? Also from /var/log/syslog I cannot see it is mounted, this is the last part of the startup sequence: kernel: [ 14.229494] ACPI: Power Button (FF) [PWRF] kernel: [ 14.230326] ACPI: AC Adapter [ACAD] (on-line) kernel: [ 14.460136] input: PC Speaker as /devices/platform/pcspkr/input/input3 kernel: [ 14.639366] udev: renamed network interface eth0 to eth1 kernel: [ 14.670187] eth1: link up kernel: [ 16.329607] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/ kernel: [ 16.367540] parport_pc 00:08: reported by Plug and Play ACPI kernel: [ 16.367670] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] kernel: [ 19.425637] NET: Registered protocol family 10 kernel: [ 19.437550] lo: Disabled Privacy Extensions kernel: [ 24.328857] loop: module loaded kernel: [ 24.449293] lp0: using parport0 (interrupt-driven). kernel: [ 26.075499] EXT3 FS on sda1, internal journal kernel: [ 28.380299] kjournald starting. Commit interval 5 seconds kernel: [ 28.381706] EXT3 FS on sdc1, internal journal kernel: [ 28.381747] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 28.444867] kjournald starting. Commit interval 5 seconds kernel: [ 28.445436] EXT3 FS on sdb1, internal journal kernel: [ 28.445444] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 31.309766] eth1: no IPv6 routers present kernel: [ 35.054268] ip_tables: (C) 2000-2006 Netfilter Core Team mysqld_safe[4367]: started mysqld[4370]: 100124 14:40:21 InnoDB: Started; log sequence number 0 10130914 mysqld[4370]: 100124 14:40:21 [Note] /usr/sbin/mysqld: ready for connections. mysqld[4370]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3 /etc/mysql/debian-start[4417]: Upgrading MySQL tables if necessary. /etc/mysql/debian-start[4422]: Looking for 'mysql' in: /usr/bin/mysql /etc/mysql/debian-start[4422]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheck /etc/mysql/debian-start[4422]: This installation of MySQL is already upgraded to 5.0.51a, u /etc/mysql/debian-start[4436]: Checking for insecure root accounts. /etc/mysql/debian-start[4444]: Checking for crashed MySQL tables.

    Read the article

  • How to Play FLAC Files in Windows 7 Media Center & Player

    - by Mysticgeek
    An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen.   Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library.   Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information.   After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library.   Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12.   Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info.   Then confirming the album information is correct…   Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8  M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

    Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >