Search Results

Search found 5438 results on 218 pages for 'ide hdd'.

Page 137/218 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Firefox 3.5.6 Uninstaller not working

  - by Wesley

  Hi all, I want to uninstall Firefox 3.5.6 in favor of Opera 10.10. However, I've went into Control Panel Add or Remove Programs and tried clicking Remove from there, but nothing happens. I go into the Program Files for FIrefox and find the Uninstaller folder and click the helper.exe found in there. Still, nothing happens. Is there some possible way to uninstall Firefox without screwing up the rest of my computer? Computer is a EMACHINES T2482: http://emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T2482 RAM has been upgraded to 1 GB PC3200 DDR, GPU has been upgraded to 128MB GeForce 6200, HDD has been upgraded to 160 GB, PSU has been upgraded to 350W and Floppy and DVD Reader have been disconnected from mobo and power. OS is XP Pro SP3

  Read the article

• Windows XP SP3 install keeps rebooting

  - by TerryR

  The base fonts on my Windows XP Pro were corrupted. A suggested fix was to "install" XP again, essentially just to overwrite the WINNT folder hence resetting all the fonts. I downloaded the XP Pro SP3 installer from our corporate MSDN account, ran it straight from the HDD and at the very end it crashed and rebooted. Now it just keeps rebooting over and over after saying "Continuing installation...." I can't boot in Safe Mode, I can't get to a command prompt or anything. I'm out of ideas. Formatting the drive and performing a fresh install is NOT an option.

  Read the article

• On booting my laptop warns me about failure of hard disk is imminent...can it be repaired or to be replaced..?

  - by nrb

  when I am booting my laptop (Lenovo G550) it gives an error message prior to that.. SMART Failure Predicted on Hard Disk O:Hitachi HTS543225l9A300-(PM) Warning : Immediately back up your data and replace your hard disk drive. Afailure may be imminent. Press F1 to continue.. Once it started, it runs smoothly, I also verified its status by running some internal HDD tests by Hard Disk Senitel software..It shows no bad sector , no virus, no damage , normal temperature ... it suggests every thing is OK except its health... Now my question is that then what is the wrong with it..? It may be wrong with plates (dusty) or the read/write heads...then can I go for repair it or replace it...? My system now reminds me every half an hour to resolve this problem since last 10 days... Help me.

  Read the article

• PC case and PSU screw question....

  - by user32569

  Hi, I have maybe a funny one to ask.... To this Christmass I bought new PC. When I started to asseble it, I found that my case (Artic Cooling Silentium T11) has 12 screws for HDD, DVD etc, and 6 screws for the expansion cards. Well, first thing that surprised me was, why only 6 screws for expansion card, when case has actually 7 slots. And second, what are PSU screws supposed to some with? The PSU, Case or nothing? Becouse neighter PSU or Case had them. PSU is Evolve Storm 600W. Well, I know case and PSU are not some high end devices, but still, would it hurt them to add 1 screw for expansion cards and 4 for PSU? So, my question is, is this situation normall, or which one (Case or PSU) does normally screws come with? Thanks.

  Read the article

• Should I install Windows 7 on a 3 years old PC?

  - by Jitendra vyas

  This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

  Read the article

• Connect to SVN repository with Netbeans using SVN+SSH

  - by shuby_rocks

  I am trying to connect to a SVN server in order to import my project into it with svn+ssh authentication method. I am using the NetBeans IDE (6.8) with subversion plugin installed on Windows XP SP2. I have plink installed with its path set in the Windows PATH env variable. When I use the similar looking repository URL (XXXX and YYYY replaced with sensible things) svn+ssh://XXXX@YYYY/home/dce/svn/trunk along with this external tunnel command plink -l <myUserName> -i C:\\privateKey.ppk I keep getting this error: org.tigris.subversion.javahl.ClientException: Network connection closed unexpectedly I searched about it on the Internet and tried many things but didn't work out. Please help if anybody has some idea what may be going wrong. Thanks a lot in advance.

  Read the article

• Windows XP-Physical memory dumping

  - by Raghav Bali

  I have windows XP professional installed on my desktop. It shows up the following errors - Physical memory dumping blue screen. : This aint a new problem, i have been facing this problem ever since i bought this systme. initially the maintainence guy said it was a faulty hard drive and i have got it replaced 3 times already in the past 1 yr. The system gets utterly slow after a usage of around 2-3 months and then these errors crop up and i have to reinstall my windows to keep away these errors. But this time,its been only a week and the blue screen has come up 3 times. What can be the actual cause of the error?? Mine is an assembled machine, its a core 2duo with gigabyte motherboard and a 1 gb ram, 160 gb seagate hdd. please help me its a seriously annoying problem. Edit : A new error recent popprd up, what should i do now??

  Read the article

• How to speed up rsync?

  - by Jakobud

  I'm running rsync to sync a directory onto my external USB HDD. It's about 150 gigs of data. 50000+ files I would guess. It's running it's first sync at the moment, but its copying files at a rate of only 1-5 MB/s. That seems incredibly slow for a USB 2.0 enclosure. There are no other transfers happening on the drive either. Here are the options I used: rsync -avz --progress /mysourcefolder /mytargetfolder I'm running Ubuntu Server 9.10.

  Read the article

• Nearest PC equivalent to Mac Target Disk Mode?

  - by username

  Mac firmware has a special boot mode that allows you to offer its internal hdd to another computer as an external disk (you just connect the two machines via an IEEE 1394 cable). Only the second machine needs a functioning OS installed. Any good suggestions for something similar on the PC side of things? Block level access isn't important to me, I'd just like to be able to copy files off it. It doesn't matter to me if it uses Ethernet, IEEE 1394, or wifi - I just like having a quick way to access files on a client PC. Is there any single-purpose Linux distro specially designed to do this? It'd be nice to have something super simple, quickbooting, and small that I could install on a USB drive. I used to use Knoppix, but it's overkill as a Target Mode replacement.

  Read the article

• Can I ? - Develop C/C++ in Fedora 14 using GCC 4.4 and deploy in CentOS 5.2 using GCC 4.4

  - by Amit Phatarphekar

  Hello - My production env runs CentOS 5.2 and 5.5 versions. I have to develop a new tool using C/C++ and deploy it on this production env. I was planning to use Fedora 14 on my desktop with GCC 4.4 to do the development with Eclipse IDE. And then later I want to deploy the executables to CentOS 5.2 or 5.5 The production env will have GCC 4.4 as well. Since both Fedora and CentOS are RHEL based, I thought this is possible. So can I do this? Or do I need to have CentOS 5.2/5.5 on my development desktop as well? Thanks Amit

  Read the article

• Nexus One USB freezes Vista SP2 Quad Core

  - by user25479

  My Nexus One (N1) will occasionally freeze my Vista 32bit SP2 Quad Core 2.4GHz during POST. MB is ASUS P5N-E SLI with 4GB of RAM. The PC will be booting and when I connect the N1 via USB, the boot sequence will freeze, then continue once I unplug the N1 USB link. It happens whether the N1 is in USB debugging mode and when it is not. I'm not sure whether this is an N1 hw/fw issue, system interaction with my PC, or a result of my N1 development environment (I'm using the Eclipse Galileo IDE for Java Developers, primarily compiling to API Level 7. Eclipse has also occasionally frozen although I haven't established N1 USB cause-and-effect on that issue). Is anyone else experiencing these symptom?

  Read the article

• How to safely remove a device blocked by the System process with a handle on \$Extend\$RmMetadata\$Txf

  - by Heinzi

  I have an external HDD which I would like to "safely remove". Unfortunately, my system (Windows 7 x64) complains that "the device is currently in use". Using Process Explorer I discovered which process is holding a handle on the device: Obviously, System is not a process that I can just kill and be done with it. I've done a bit of research and this seems to be a common problem, but no solution has been found so far (except for rebooting the machine, which I'd like to avoid if possible). Is there any solution to this problem that I've missed?

  Read the article

• Major Issue with Asus M4A78T-E Bios

  - by user114721

  I am having major issues with my bios and I have tried three different forums in hopes that there is someone out there that can help me.... The issue is that every single time I turn off my computer, when I turn it back on the bios resets and tries to boot from a floppy drive....first problem is I dont have a floppy drive and secondly it does not read my HDD.... I tried everything to fix this...I tried replacing the cmos battery, I tried replacing the sata cable, and I tried a different sata port....none of these things seem to be working. Now the messed up part about all of this is that i am on my computer right now....If I take the battery out and put it back in and setup the bios again manually I am able to get into my computer...but this is NOT normal... Why is my bios resetting constantly when I power down my computer? Please assist me I need my computer for business

  Read the article

• Replacing an ATA-100 hard drive

  - by Pieter

  I was instructed to replace the hard drive in an old laptop, a Dell Latitude D505. I'm suspecting that there was a head crash when someone moved the laptop while it was turned on. In the specifications, I found this about the hard drive: 30GB ATA-100; (4200RPM); 40GB ATA-100 (5400RPM); 60GB ATA-100 (4200RPM) *Optional 40GB (5400) 2nd HDD Module for media bay I'm familiar with SATA and IDE, but ATA-100 doesn't ring a bell. What do I have to take into account when I go look for a replacement hard drive?

  Read the article

• Are there any home/soho NAS devices that will backup/sync to the cloud?

  - by 3rdparty

  Looking for a home office (SOHO) market (priced) network hard drive (NAS) that will sync some or all of its content to a cloud-based backup service. The only option I've been able to find so far is NetGear's [ReadyNAS Vault][1] however from what I've read it's not as secure as it could be, and the service is quite expensive ($200/yr for 50GB of cloud storage) - it's 'powered' by ElephantDrive Ideally would love to see something like Wuala integrated into a Lacie Network HDD - conveniently, I suspect this is in the works as Lacie recently acquired Wuala, however nothing has come of it yet. I know there are options to use rsync with a customizable NAS (such as the very versatile and hackable D-Link DNS-323, but the easier this is to setup and maintain, the better. Thanks! ps. I had many links posted within this question, but was limited to posting with only one due to anti-spam restrictions - gotta get my 'reputation' higher!

  Read the article

• SATA Backward compatibility? [closed]

  - by Fladur

  Possible Duplicate: Can I connect a SATA-II hard drive to a SATA-I connection? Hello everyone One of my system is really old, but I still use it, right now, the HDD is and old IDE drive that is starting to fail (I got to many damaged sectors) and I'm planing to replace it. The motherboard supports Serial ATA 1 and I have a real nice offer on a SATA 2 drive, can I use that drive on a SATA 1 interface (obviously with reduced speed) just like a USB 2.0 device on a 1.0 port? Thanks in advance.

  Read the article

• Asus P6X58D & 12GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Cannot upgrade to Lion using DVD

  - by James

  When I first setup my MBP on 10.6 I made a lot of newb mistakes, and was unable to get Ruby on Rails to install, amongst a lot of other things. Because of this, I decided to backup everything on to a Time Machine HDD and re-install Lion. I had a bunch of problems but managed to sort them out, requiring me to go back to 10.6 from the original disc that came with the MBP. Before I did anything however, I burnt the Lion installer that I got from the App Store to a DVD. Now though, when I try to run it, I get the following: Cannot download additional components. I've managed to download software updates, so I know it can connect to the Apple servers.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendati

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Computer bluescreen-ing with 0x7A and 0xF4 errors

  - by lcarpenter

  Hiya, This computer is locking up for around 5-30 seconds before throwing Blue Screen of Death's with 0x7A and occasionally 0xF4 errors. The log files don't really show anything informative, and Windows Update doesn't show any new drivers for the HDD. Upon restart, it shows a "A disk error has occurred /n Press Ctrl+Alt+Del to continue", and to fix this I go into WinRE via the pendrive and run "bootsect /nt60 C: /force /mbr" and that seems to fix it so it boots. And then the cycle repeats. If you want any more information please ask. Thanks, Luke Carpenter

  Read the article

• Recover Intel Matrix Raid Configuration

  - by Catalin DICU

  Hello, I had 2 HDDs in Intel Matrix Raid configuration on a motherboard with intel ICH9R. I had some RAID 0 partitions and one RAID 1 partition. Somehow when replacing my videocard I partially unpulugged the power connector from one of the HDD. I booted and only one disk was showing. So I turned off the PC and correctly plugged the power connector and how both HDDs are showing as "Non-Raid Disk" Is there a way to restore the raid configuration from before ? In fact I don't really remember how my partitions where configured, I had 2x100Gb + 1x296Gb in RAID 0 and one 50Gb in RAID 1 (using 2x320Gb HDDs) but I'm not sure how many volumes and how the partitions where allocated on the volumes. Is there a tool to find that ? Thanks

  Read the article

• Ubuntu, No wireless networks found after correctly installed madwifi

  - by Peter

  Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• Random timeouts in IIS7

  - by Cor-Paul

  Hi, I have a weird problem which I think is caused by my IIS7 installation on Vista 64 bit. I have a bunch of AJAX calls and JS dynamic file loads (~30) in a local application, and I get random timeouts (or so it seems) in my browser. In Chrome it looks like the page just stops loading (no HDD activity), in Firefox/Firebug I can see that some of the files are being loaded but they never actually finish. When I reload the page the same occurs, but for (random) other files that must be loaded. When I try to load one of those JS files concurrently (so during the timeout in FF) in another browser, the file loads there. So I am pretty sure the request can be handled by IIS. I am thinking about a limit or so on simultaneous requests from the same browser which is not working correctly, but I am pretty clueless on how to solve this. Does anyone recognize this problem and know a solution? Thanks!

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >