Search Results

Search found 5438 results on 218 pages for 'ide hdd'.

Page 142/218 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• HP DL380 G5 Predictive Drive Failure on a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• does windows incremental backup include system state backup?

  - by Kossel

  I'm managing my very small office server with windows server 2008. since I have only one server, and the user group is really small. I made the first hdd into 2 partitions. one (C:) for windows and Active directory, another (D:) for tomcat and database. I'm doing incremental back C: and D: daily to hdd2 (E:) using windows server backup. is it enough to let me do fully restore my server in case of disaster? I ask this because I have read there is also a system state backup, and I also have to do that periodically in order to get AD back? isn't it with incremental/full backup I can do full bare-metal recovery?

  Read the article

• Network adapters reliability

  - by casey_miller

  Can you help me with understanding of reliability of network adapters. Most of the time servers do have at least 2 NIC's bonded to provide sort of a HA for it. So in case of one NIC fails, the second would still do the job. I wonder which factors work when you use network adapters. I know that, the most important and weakest part of any computer system is: storage (i.e HDD). but how reliable actually network adapters are? There are more expensive ones, and cheaper adapters. In which cases do they actually fail? In what circumstances. May it be a intensive usage of them Time when it's on In your experience how often you found yourself changing NIC's due to their fail? Or just what's the typical lifetime of commodity NIC's? thanks.

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

  Read the article

• Ways to remotely reboot a Linux system

  - by dualed

  I had a remote server running Debian Sarge that experienced some HDD failure and I meant to reboot it hoping that fsck could repair the errors automatically. I eventually drove out there and replaced the faulty disks... But I was wondering: What other ways are there to force a Linux system to reboot that do not require hard drive access? What I had tried: shutdown -r now Did not work, as shutdown is a program that would have to be loaded from disk, the error shown in the terminal was bash: /sbin/shutdown: Input/output error init 6 same as above telinit q same as above kill -2 1 This did not print an error, but did not work either. (However, it is possible that the Sarge init did not implement SIGINT, the sarge manpages did not mention it. So it could work in a more recent version of Debian) This guide on PCFreak.net. However, this failed at sysctl, which was not in memory either.

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• Can't get PHP script to run when launched from Aptana Studio

  - by samuel

  I've been using notepad++ for web development (currently html, css, and some php and mysql). I decided to dive into an IDE to see if I could cut down on development time and have more power than notepad++. I grabbed Aptana yesterday and, after harassing it for a few hours, have finally gotten everything up and running. The only problem is that my web pages, which are .php's, do not execute any of their included .php code in the browser. as an example: <?php echo "IT WORKS WOOO"; ?> ought to print IT WORKS WOOO smack in the middle of my blank test page, and yet it does not. I checked to see if I had somehow forgotten how to do an echo statement and ran it on my desktop, using notepad++, and it worked just fine. I have the php plugin, have used the php perspective to write it and have launched it as a php web page, but nothing makes it execute the php within. Any ideas?

  Read the article

• Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

  - by Chris C.

  I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• Windows 7 taskbar items not grouping properly

  - by Joel in Gö

  I don't understand the Windows 7 taskbar behaviour. For some programs it will not group the running instances, or will groups some of them but not all. I have set taskbar items to "always combine", but this has not helped. It seems to possibly be two issues: with an app that has a different taskbar icon when running than for its launcher; and for VisualStudio, when starting by double clicking a project it groups separately from when starting the IDE from the .exe. Is there any way to force the items to combine? I quite like the Win7 taskbar, and would like it to work consistently...

  Read the article

• Storage disk format to use to be utilised by all OS

  - by ClothSword

  Aiming to have a large internal HDD to store files, and several OSes on separate disks. They all need to read and write to one storage drive. Ubuntu (13.04+) Mac OSX (10.8+) Windows (7+) What format should the drive be? Would like to avoid buying third party software, here's what I have discerned so far: NTFS - Can't be written to by Mac without buying third party software? ext3 - Windows can't read, third party software in development. Mac has OSXFUSE HFS+ - Buy third party and/or faff around to get working on windows exFAT - Cross platform, but breaks MS patents?

  Read the article

• How to connect MySQL database of local server in NetBeans 7.0.1 ( windows)?

  - by diEcho

  Hello All, I am using NetBeans IDE 7.0.1 on Windows 7 very first time for my php. Actually in my company there is a local server ( 192.168.1.99) where all projects resides and we access phpmyadmin of that local server, Although I have added my project folders with NetBeans (this was also very hectic) but now I am having problem to connect database of my local server as I can see 192.168.1.99/phpmyadmin through my browser. I have set below value Server Host : localhost, Server port number : 3306, Administrator username : keshav Administrator password : ****** and when i click on connect, a popup error windows appears with below text Unable to connect to the MySQL server: org.netbeans.api.db.explorer.DatabaseException: org.netbeans.api.db.explorer.DatabaseException: java.sql.SQLException: Access denied for user 'keshav'@'localhost' (using password: YES). The server may not be running or your MySQL connection properties may not be set correctly. Do you want to edit your MySQL connection properties? Please help me out. Thanks

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state [closed]

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• Windows XP , HP , IntelInside Trobelshooting

  - by Jamil Hneini

  My Windows XP PC has stopped booting. On start up, before Windows boots a screen appears saying: Windows Could Not Boot: Could Not Find or Corrupted file <Windows root>\Sytem32\Hal.dll Please Reinstall the file... From that I understand that I have to reinstall the OS but my computer is so old that I have lost the backup and recovery disk. My Computer's Info: 32Bit Computer Pentium 4 Windows XP Service Pack 2 HP History: My Computer has 4 hard drives 2 internal 40 GB drives (C And D) 2 external 8GB drives (E And F) Additional Info: I need the files inside C And E The computer reads my flash drive as a hard drive (8.45GB)(I have never booted while my USB pluged in while I was troubleshooting) With some test I discovered that the C drive wasn't detected by the computer I have already configured the boot order of BiOS I have Set The SATA to IDE The Question: I have a setup for windows 8 32 bit how can I boot from my USB to run that setup? If that isn't the proper way to handle this problem please tell me the proper way.

  Read the article

• VMWare Workstation can't read CD/DVD drive

  - by Chris W

  A fresh install of VMWare Workstation 7 (7.1.1 build 282343) on Windows 7 64 bit. When I try to read a CD/DVD from a guest (either to install a fresh guest or to read a CD within an existing VM I get the following error: Cannot connect virtual device ide1:0 because no corresponding device is available on the host. I've tried fiddling with the IDE channels as well as tried SCSI with no joy. What am I missing? I can run ISOs fine but I don't want to have to convert everything to an ISO when I presume that this should just work fine.

  Read the article

• Is it possible to modify a color scheme and windows decorations in Xfce4?

  - by Juhele

  just testing PCLinuxOS Phoenix XFCE Edition 2011-07 which I would like to install on my grandpa's PC instead older PCLOS 2009 with KDE3 (which is almost impossible to upgrade). The PC is relatively older one (Sempron 2200+ CPU, MSI K7N2GM2 board with integrated GeForce 440MX series graphics, 1GB RAM and 80GB IDE HDD) and I thought that it is too weak for KDE4. I already used Xfce in the past (Sam Linux 2006 and 2007), but in new Xfce4 I am not able to somehow change the windows color scheme and the windows decorations - the settings manager offers me switching between preinstalled themes but it is possible to modify them with some GUI?

  Read the article

• UUID in Mountain Lion

  - by Naji

  I am trying to find my external HDD UUID in Mountain Lion but diskutil info /dev/disk1s1 returns: Najis-MacBook-Air:~ ****$ diskutil info disk1s1 Device Identifier: disk1s1 Device Node: /dev/disk1s1 Part of Whole: disk1 Device / Media Name: Untitled 1 Volume Name: My Book Escaped with Unicode: My%FF%FE%20%00Book Mounted: Yes Mount Point: /Volumes/My Book Escaped with Unicode: /Volumes/My%FF%FE%20%00Book File System Personality: NTFS Type (Bundle): ntfs Name (User Visible): Windows NT File System (NTFS) Partition Type: Windows_NTFS OS Can Be Installed: No Media Type: Generic Protocol: USB SMART Status: Not Supported Total Size: 2.0 TB (2000364240896 Bytes) (exactly 3906961408 512-Byte-Blocks) Volume Free Space: 212.5 GB (212506509312 Bytes) (exactly 415051776 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Yes Ejectable: Yes Whole: No Internal: No And there is no UUID. What is wrong exactly? Thank you.

  Read the article

• Page File - Why set one for each drive?

  - by Magic

  Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

  Read the article

• Need disc image help pronto!

  - by data

  I recently got a job as a junior network administrator. Last week the senior admins did their yearly reinstall of server 2003, exchange, drivers etc on the main server. I've been asked to back up the disc so that next year they can just copy over the pre-made image. What tools can i use to achieve both the creation of the entire servers HDD image and loading it back on (id like to test it in the sandbox.) To impress them, a program that is free is preferable. And maybe a tool that can do it all from booting the program off of a USB drive.

  Read the article

• How does an OS communicate with other hardware components?

  - by Jack

  How can a program running on a CPU (mostly OS) access other PC hardware? Such as Graphic card, HDD and so? From what I read, in DOS, this was done using BIOS calls, specifically the INT instruction. But, the INT instruction should only jump to the certain space in RAM. So how can some program stored in RAM access other computer hardware, when the CPU can only access RAM, and receive interrupts? Does Windows use INT instructions as well, or is there a new way to communicate with the hardware?

  Read the article

• I have static noise in my speakers and headset

  - by Kazarion

  I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

  Read the article

• Why does diskpart set the volume attributes on all volumes?

  - by Nick

  I was trying to migrate a Win7 OS from a HDD to a SSD. I've created 2 partition with 1024KB offset, with diskpart: 100MB System Reserved and a 60GB for C:. I've cloned their contents using Easeus Disk Copy. I've loaded the Windows 7 Boot DVD, and wanted to use diskpart to drop the letter for the System Reserved partition and make it hidden. select volume 0 detail volume attribute volume set nodefaultdriveletter attribute volume set hidden These 2 attribute set commands actioned on both volumes (0 and 1, MSR and C:) instead of the selected one, and viceversa. I've tried to clear these attributes from volume 1, but it cleared them also from volume 0. Why does DiskPart have this behaviour?

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >