Search Results

Search found 11221 results on 449 pages for 'pure virtual'.

Page 137/449 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Serial port access errors in WINE

  - by goldenmean

  Hello, I have a setup in which I use a USB serial adapter + some application which sends and receives data using that serial usb. But this setup which works on a Windows, or even in a VMWare Virtual windows, does not work under WINE. IT transmits data but i cannot receive data. The cable and the applications are same as in the working and non-working scenarios. I guess The fact that the application works over the USB serial cable just as fine under Virtual Windows(VMware running on linux) by mapping /dev/ttyUSB to the com port, no external software/DLL needed, means it does not need any specific driver. (Am I correct in this assumption that application doesnt need any driver?) (I also tried with a different setup(different USB serial adapter + different application under WINE, but even that does not work under WINE, but it works fine under WIndows/Virtual Windows) How can I get it working under WINE? Any pointers appreciated.

  Read the article

• IIS in VirtualBox serving files from shared Ubuntu folder

  - by queen3

  Here's the problem: I want to use Ubuntu. But I need to develop ASP.NET (MVC) sites. So I setup VirtualBox with Win2003 and IIS6. But I would prefer my working files to be located in my Ubuntu home folder. So I setup shared folder in VirtualBox and make IIS6 virtual directory work from there. The problem is, IIS6 can't do this. Whatever I try (mapped drive, network uri path) I get different IIS errors: can't access folder (for mapped drive), can't monitor file system changes (\vboxsvr share path), and so on. Is there a way for IIS6 in virtual machine to configure virtual application folder to be on host machine (Ubuntu) - be it shared folder, mapped drive, smb share, or whatever?

  Read the article

• Could not open the dk file

  - by IgnacioRivera

  I dont know what I have done, but it is over a month now that I can not open my virtual machine, I'm using a MacBookPro with Fusion 2.0.6. I recently upgraded my system to Snow Leopard. but it was working fine. Now I get a message that says" File not found: Windox XP. vmdk. I went to all my backups and when I unpack the files in the virtual machine, there is not such a file. the only file that I can see that may contents the data is the .vmem file that show to have 1.2 GB of data. I have tryed and tryed to contact VMware support but it has become an impossible task, If theres someone that could give me some ideas on how to recover my virtual machine????

  Read the article

• VirtualBox in production?

  - by MrG

  I'm planning to move a service which is currently powered by Debian into a VirtualBox. That would allow us to easily port it i.e. to a faster machine if required. The setup would be: debian host > Virtual Box #1 > debian instance #1 running Apache & application > Virtual Box #2 > debian instance #2 containing database Do you have any experience with a production setup based on Virtual Box? Is it stable and fast enough? Many thanks!

  Read the article

• XP Mode as a server, Win 7 as a client

  - by Spyro

  I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

  Read the article

• Resize Ubuntu Linux system to smaller disk inside VMware ESXi

  - by mlambie

  I have several Ubuntu Linux virtual machines running on VMware ESXi hosts that have all been allocated disks much larger than their required capacity. As space is now becoming an issue on our SAN, I'd like to investigate downsizing the allocated disk space on these machines. All systems will be completely backed up imaged before I begin making changes, and I will always retain a pristine backup in case the partition resizing does not work. Is there an easier way than the following procedure, or is their a better solution entirely? Shutdown and assign a second disk to the virtual machine Boot using the SystemRescueCD Use GParted to resize the original (source) partition, making it smaller Clone the new, smaller partition to the second disk Shutdown and remove initial disk from the virtual machine Reboot and force fsck to check the filesystem

  Read the article

• Enable Hardware Virtualization on HP CompaqDX2420?

  - by 7alwagy

  Hey Guys, After installing vmware7, I tried to run a virtual machine with Mac OSX installed. When I tried to run this virtual machine I got an error message saying: Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization. I'v googled and found out that my processor (Intel Core 2 Duo E7500 Processor (2.93 GHz, 3 MB L2 cache, 1066 Mhz FSB)supports Hardware virtualization. Does anyone know how to enable this in order to get this virtual machine running?

  Read the article

• How to convert eps file to a large jpeg image

  - by Anand

  Hello, I am using Linux. I want to convert an eps file to jpeg file. I find that I can use "convert" command. However, the resulting image looks very small. I want to enlarge the jpeg file by -resize option. It seems not to work. The resulting image is a pure black one. Do anyone has the same problem? Here are more details: 1: if I use convert -scale 1000x1000 your.eps your.jpg the resulting image looks like a low quality image. The eps vector image is not scaled properly. 2: if I use convert -geometry 300% your.eps your.jpg I get a pure black image. Here is my phf file: 2shared.com/document/RXl2Be-g/askquestions.html and my eps file: 2shared.com/file/qrmwKegj/askquestions.html Thank you very much for your help!

  Read the article

• XenServer VM's lose network settings

  - by Ash

  We deploy virtual machines using Citrix XenServer 6.0 for our clients. Two seperate clients experience the same issue: when a Server 2008 virtual machine is restarted, the static IP addresses (network address, subnet, gateway, primary DNS) don't appear to apply correctly as the IP's cannot be pinged, network services cannot be accessed etc. The issue is resolved by manually switching the network adapters to DHCP, then re-setting them to the original static IP's. While not a major issue, it's a pain when restarting servers due to Windows Updates, plus iSCSI drives need to be manually connected to Windows again via iSCSI Initiator. We have tried removed the network adapters from the virtual machine under XenCentre but without luck. Anyone experienced similar issues?

  Read the article

• Set up linux box for hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

  Read the article

• Does kern.hz still have any relevance in FreeBSD if "dynamic tick mode" is enabled?

  - by Frerich Raabe

  I'm running a FreeBSD 9.0 setup as a virtual machine in a KVM setup. In previous versions of FreeBSD it was common to force the kern.hz setting to a lower value so that the virtual machine does not keep the host busy because it's handling timer interrupts without having any work to do - the FreeBSD Handbook explains: The most important step is to reduce the kern.hz tunable to reduce the CPU utilization of FreeBSD under the Parallels environment. This is accomplished by adding the following line to /boot/loader.conf: kern.hz=100 Without this setting, an idle FreeBSD Parallels guest OS will use roughly 15% of the CPU of a single processor iMac®. After this change the usage will be closer to a mere 5%. However, in FreeBSD 9, the "dynamic tick mode" (aka "tickless mode") is the default, controlled by the kern.eventtimer.periodic setting which defaults to 0 (read: tickless mode). This makes me wonder - does the tip of lowering kern.hz still have any relevance for making FreeBSD 9 play nicely in a virtual machine setup?

  Read the article

• Minimum space required for Server 2008 R1 install?

  - by Chris J

  I'm trying to plan disk space for a virtual environment, and wanting to keep virtual disks as small as possible - mostly as apart from the base OS, the software going onto the VM is less than a few MB, so want to avoid physical disk space going to waste; plus it'll give me an idea of how many VMs I could physically fit in {x}GB of physical drive. For Server 2003, I've had installs on 2GB and 5GB sized virtual disks. However for Server 2008, Microsoft recommends a minimum of 10GB (I assume this is both for x32 and x64). For the record, I will be installing the x32 version. Now I know I could just go ahead and try a small install, but wanted to solicit any practical knowledge as well :-) What's the smallest install of Server 2008 possible? (excluding server core installations).

  Read the article

• How to configure 2nd network card for use in VMWare Workstation?

  - by Timo

  Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

  Read the article

• Hosting discussion forums on Windows 2008 Server / IIS, what software to use?

  - by Lasse V. Karlsen

  A plan to look into hosting discussion forums related to our product, on our own servers, has arisen, and I can't seem to find any pure .NET or Windows-based discussion forums. Since we're a pure Windows-based company, installing something that requires MySQL or Linux is going to require administration knowledge we don't currently have. What are our options? Every site I find that shows how to set up discussion forums on IIS involves just taking one of the many LAMP-based ones and tweaking IIS to run PHP or similar to run it. Isn't there a .NET-based discussion forum software? Free or not doesn't matter at this stage, right now we're just looking for options.

  Read the article

• .htaccess send requests to a subfolder's index.php

  - by mediaslave

  I have searched stackoverflow for my answer, but nothing that I have seen seems to work. I have a framework that sends all requests to an index.php file. Everything works when I install it in the root of the virtual host: http://domain/ http://domain/home http://domain/home/index The problem happens when I try to install the framework in a subdirectory like: http://domain/blog/ Requests like: http://domain/blog/home http://domain/blog/home/index All of those requests should be sent to the index.php file that lives in /blog My current set up is: http://domain/index.php - This file just prints out 'we are in the root of the virtual host' The framework is not installed there. http://domain/blog - This works fine When I try to got to http://domain/blog/home I get the roots index.php file not the frameworks. I get the message 'we are in the root of the virtual host'. I have the following .htaccess file located at http://domain/blog/.htaccess RewriteEngine on Options Indexes FollowSymLinks -MultiViews RewriteBase /blog/ RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule !\.(js|ico|gif|jpg|png|css)$ index.php Any help is greatly appreciated. Regards, Justin

  Read the article

• VMWare Server lck file keeps coming back

  - by muncherelli

  I am running VMWare Server 2.0 on a Debian Lenny system as a host OS. I am getting this error when I try to start a Virtual Machine Cannot open the disk '/var/lib/vmware/Virtual Machines//.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file. So I looked around on the web and found that I need to delete the .lck folder and file in order to get this error This seems to happen any time I reboot my Debian Server. The Virtual Machines sometimes do not recover and this lck file is causing problems. Should I create a cron script that does a rm *.lck on each of my machines on reboot? Looking for any direction on how to resolve this. It seems when i do a "reboot" command it is maybe not gracefully shutting down the VMware containers so the lock files are still intact?

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• VMWare Converter recommendations

  - by Tank Szuba

  I have two Ghost 14 backups of my machine. One for the machine fully configured with apps after and XP install and one of the last update before i re-imaged it (it's XP, I re-image about once every six months). I recently wanted to try simply using my initial image in a virtual environment to do my testing that generally causes me to need to re-image. I used the VMWare converter to convert the Ghost images to a virtual machine to use in Virtual box but they fail to properly boot. They get stuck after the bios loads and windows begins loading. If I power down the machine and refire it it will go to the error screen in windows that asks if you would like to boot to a different mode. none selected make any difference. What are some possible errors I should look for in the conversion process or in my settings for the converter?

  Read the article

• Using e-mail address as user name for SMTP and POP3

  - by PeterMmm

  I have a exim4 setup as SMTP. My user naming schema is to name all mail users for this server as m001, m002, m003, ... and then redirect to a real e-mail address with virtual domains. How can I allow my users to authenticate with exim to send mail using either their system user name (m001) or the email address ([email protected])? User login information for m001 are stored in linux system files (passwd, shadow). They are linked thru entries in a virtual address table for each domain that this server can serve: # /etc/exim4/virtual/example.com m001: [email protected] m002: [email protected] m003: [email protected] The same can be applied to qpopper ?

  Read the article

• What would happen if I did a "Boot to VHD" to a VHD that was configured to run under Hyper-V?

  - by tbone

  Microsoft has a Hyper-V based VM I'm interested in running, however, I don't have access to a Windows Server 2008 machine to try it on, only a Windows 7 Pro x64 machine (Windows 7 does not support Hyper-V). This is the VM in question: This download contains three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. 2010 Information Worker Demonstration and Evaluation Virtual Machine (SP1) http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 I came across a somewhat relevant article from Scott Hanselman: Less Virtual, More Machine - Windows 7 and the magic of Boot to VHD: http://www.hanselman.com/blog/LessVirtualMoreMachineWindows7AndTheMagicOfBootToVHD.aspx I realize other options are to convert this VM to a VMWare compatible VM or some of the options to run it under VirtualBox. But instead of those routes, I'm wondering: What would happen if I tried to go the "Boot to VHD" route using this Hyper-V VHD? Is it possible that during the boot process, Windows would simply notice that hardware had changed and adjust accordingly, installing the appropriate drivers and continuing on without a hitch?

  Read the article

• Import virtualBox appliance to KVM

  - by Hugo Bulnes

  Im new using KVM as a virtualization solution. Currently I'm using VirtualBox to manage my virtual machines in my personal computer, but I'm moving my virtualization to a Server, so I set up a Linux server with KVM. And now I'm trying to import a virtualBox vm to KVM. So far I couldn't make it work. I already convert the ova file from VirtualBox to a format more familiar to KVM (qcow2), and I try to create a new virtual machine using virt-install command and setting the new virtual machine hard drive with the .qcow2 file. There is anyone could help me? thank you!

  Read the article

• Can you shrink the sparse disk image of a Mac OS X guest OS in VMWare Fusion?

  - by Paul D. Waite

  I use VMWare Fusion on my Mac to run a virtual Windows 7 machine, and the Microsoft IE compatibility Windows XP virtual machines. In VMWare Tools on the Windows guest OSes, there’s a “Shrink” option that lets you reduce the size of the sparse disk image used by the guest OS, to save hard drive space on your host OX. I’ve recently created another virtual machine, this time running Snow Leopard Server. I was wondering if I could shrink the spare disk image used by this machine too, but I can’t find a VMWare Tools app on the Mac guest OS, even though VMWare Tools have been installed (as VMWare’s Shared Folders feature is working). Is there any way to shrink the sparse disk image used by Mac OS X guest OSes in VMWare Fusion?

  Read the article

• Articles of x386 and later CPU based systems

  - by user32569

  Hi there. I know this is hard question, and possibly not to be answered here, but if there is some article, or more you know about, please post a link. About books, its sad but many great computer books cannot be bought in my country. So, you can find many articles online, which says how memory was mapped back in pre x386 CPU. How there was explicit holes ready for MMIO BIOS, Video BIOS, etc. How there was A20 line for allowing higher memory access etc. Problem is, time changed. Today BIOSes are many times larger, and pure x86 16bit mode is used for booting and ROM flashing only. OS ignore BIOS as they access everything using drivers. And I just want to know, how it works today. I know not so specific question, but I read OS dev wiki, many articles, but all refering to days before massive usage of pure 32bit CPUs.

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >