Search Results

Search found 4571 results on 183 pages for 'posts'.

Page 138/183 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• ODEE Green Field (Windows) Part 3 - SOA Suite

  - by AndyL-Oracle

   So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty! 

  Read the article

• Setup and configure a MVC4 project for Cloud Service(web role) and SQL Azure

  - by MagnusKarlsson

  I aim at keeping this blog post updated and add related posts to it. Since there are a lot of these out there I link to others that has done kind of the same before me, kind of a blog-DRY pattern that I'm aiming for. I also keep all mistakes and misconceptions for others to see. As an example; if I hit a stacktrace I will google it if I don't directly figure out the reason for it. I will then probably take the most plausible result and try it out. If it fails because I misinterpreted the error I will not delete it from the log but keep it for future reference and for others to see. That way people that finds this blog can see multiple solutions for indexed stacktraces and I can better remember how to do stuff. To avoid my errors I recommend you to read through it all before going from start to finish.The steps:Setup project in VS2012. (msdn blog)Setup Azure Services (half of mpspartners.com blog)Setup connections strings and configuration files (msdn blog + notes)Export certificates.Create Azure package from vs2012 and deploy to staging (same steps as for production).Connections string error Set up the visual studio project:http://blogs.msdn.com/b/avkashchauhan/archive/2011/11/08/developing-asp-net-mvc4-based-windows-azure-web-role.aspx Then login in to Azure to setup the services:Stop following this guide at the "publish website" part since we'll be uploading a package.http://www.mpspartners.com/2012/09/ConfiguringandDeployinganMVC4applicationasaCloudServicewithAzureSQLandStorage/ When set up (connection strings for debug and release and all), follow this guide to set up the configuration files:http://msdn.microsoft.com/en-us/library/windowsazure/hh369931.aspxTrying to package our application at this step will generate the following warning:3>MvcWebRole1(0,0): warning WAT170: The configuration setting 'Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString' is set up to use the local storage emulator for role 'MvcWebRole1' in configuration file 'ServiceConfiguration.Cloud.cscfg'. To access Windows Azure storage services, you must provide a valid Windows Azure storage connection string. Right click the web role under roles in solution manager and choose properties. Choose "Service configuration: Cloud". At "specify storage account credentials" we will copy/paste our account name and key from the Azure management platform.3.1 4. Right click Remote desktop Configuration and select certificate and export to file. We need to allow it in Portal manager.4.15 Now right click the cloud project and select package.5.1 Showing dialogue box. 5.2 Package success Now copy the path to the packaged file and go to management portal again. Click your web role and choose staging (or production). Upload. 5.3Tick the box about the single instance if that's what you want or you don't know what it means. Otherwise the following will happen (see image 4.6)5.4 Dialogue box When you have clicked the symbol for accept- button you will see the following screen with some green indicators down at the right corner. Click them if you want to see status.5.5 Information screen.5.6 "Failed to deploy application. The upload application has at least one role with only one instance. We recommend that you deploy at least two instances per role to ensure high availability in case one of the instances becomes unavailable. "To fix, go to step 5.4If you forgot to (or just didn't know you were supposed to) export your certificates. The following error will occur. Side note, the following thread suggests. To prevent: "Enable Remote Desktop for all roles" when right-clicking BIAB and choosing "Package". But in my case it was the not so present certificates. I fund the solution here.http://social.msdn.microsoft.com/Forums/en-US/dotnetstocktradersampleapplication/thread/0e94c2b5-463f-4209-86b9-fc257e0678cd5.75.8 Success! 5.9 Nice URL n' all. (More on that at another blog post).6. If you try to login and getWhen this error occurs many web sites suggest this is because you need:http://nuget.org/packages/Microsoft.AspNet.Providers.LocalDBOr : http://nuget.org/packages/Microsoft.AspNet.ProvidersBut it can also be that you don't have the correct setup for converting connectionstrings between your web.config to your debug.web.config(or release.web.config, whichever your using).Run as suggested in the "ordinary project in your solution. Go to the management portal and click update.

  Read the article

• Omni-directional light shadow mapping with cubemaps in WebGL

  - by Winged

  First of all I must say, that I have read a lot of posts describing an usage of cubemaps, but I'm still confused about how to use them. My goal is to achieve a simple omni-directional (point) light type shading in my WebGL application. I know that there is a lot more techniques (like using Two-Hemispheres or Camera Space Shadow Mapping) which are way more efficient, but for an educational purpose cubemaps are my primary goal. Till now, I have adapted a simple shadow mapping which works with spotlights (with one exception: I don't know how to cut off the glitchy part beyond the reach of a single shadow map texture): glitchy shadow mapping<<< So for now, this is how I understand the usage of cubemaps in shadow mapping: Setup a framebuffer (in case of cubemaps - 6 framebuffers; 6 instead of 1 because every usage of framebufferTexture2D slows down an execution which is nicely described here <<<) and a texture cubemap. Also in WebGL depth components are not well supported, so I need to render it to RGBA first. this.texture = gl.createTexture(); gl.bindTexture(gl.TEXTURE_CUBE_MAP, this.texture); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MIN_FILTER, gl.LINEAR); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MAG_FILTER, gl.LINEAR); for (var face = 0; face < 6; face++) gl.texImage2D(gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, 0, gl.RGBA, this.size, this.size, 0, gl.RGBA, gl.UNSIGNED_BYTE, null); gl.bindTexture(gl.TEXTURE_CUBE_MAP, null); this.framebuffer = []; for (face = 0; face < 6; face++) { this.framebuffer[face] = gl.createFramebuffer(); gl.bindFramebuffer(gl.FRAMEBUFFER, this.framebuffer[face]); gl.framebufferTexture2D(gl.FRAMEBUFFER, gl.COLOR_ATTACHMENT0, gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, this.texture, 0); gl.framebufferRenderbuffer(gl.FRAMEBUFFER, gl.DEPTH_ATTACHMENT, gl.RENDERBUFFER, this.depthbuffer); var e = gl.checkFramebufferStatus(gl.FRAMEBUFFER); // Check for errors if (e !== gl.FRAMEBUFFER_COMPLETE) throw "Cubemap framebuffer object is incomplete: " + e.toString(); } Setup the light and the camera (I'm not sure if should I store all of 6 view matrices and send them to shaders later, or is there a way to do it with just one view matrix). Render the scene 6 times from the light's position, each time in another direction (X, -X, Y, -Y, Z, -Z) for (var face = 0; face < 6; face++) { gl.bindFramebuffer(gl.FRAMEBUFFER, shadow.buffer.framebuffer[face]); gl.viewport(0, 0, shadow.buffer.size, shadow.buffer.size); gl.clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT); camera.lookAt( light.position.add( cubeMapDirections[face] ) ); scene.draw(shadow.program); } In a second pass, calculate the projection a a current vertex using light's projection and view matrix. Now I don't know If should I calculate 6 of them, because of 6 faces of a cubemap. ScaleMatrix pushes the projected vertex into the 0.0 - 1.0 region. vDepthPosition = ScaleMatrix * uPMatrixFromLight * uVMatrixFromLight * vWorldVertex; In a fragment shader calculate the distance between the current vertex and the light position and check if it's deeper then the depth information read from earlier rendered shadow map. I know how to do it with a 2D Texture, but I have no idea how should I use cubemap texture here. I have read that texture lookups into cubemaps are performed by a normal vector instead of a UV coordinate. What vector should I use? Just a normalized vector pointing to the current vertex? For now, my code for this part looks like this (not working yet): float shadow = 1.0; vec3 depth = vDepthPosition.xyz / vDepthPosition.w; depth.z = length(vWorldVertex.xyz - uLightPosition) * linearDepthConstant; float shadowDepth = unpack(textureCube(uDepthMapSampler, vWorldVertex.xyz)); if (depth.z > shadowDepth) shadow = 0.5; Could you give me some hints or examples (preferably in WebGL code) how I should build it?

  Read the article

• Subterranean IL: Exception handling 2

  - by Simon Cooper

  Control flow in and around exception handlers is tightly controlled, due to the various ways the handler blocks can be executed. To start off with, I'll describe what SEH does when an exception is thrown. Handling exceptions When an exception is thrown, the CLR stops program execution at the throw statement and searches up the call stack looking for an appropriate handler; catch clauses are analyzed, and filter blocks are executed (I'll be looking at filter blocks in a later post). Then, when an appropriate catch or filter handler is found, the stack is unwound to that handler, executing successive finally and fault handlers in their own stack contexts along the way, and program execution continues at the start of the catch handler. Because catch, fault, finally and filter blocks can be executed essentially out of the blue by the SEH mechanism, without any reference to preceding instructions, you can't use arbitary branches in and out of exception handler blocks. Instead, you need to use specific instructions for control flow out of handler blocks: leave, endfinally/endfault, and endfilter. Exception handler control flow try blocks You cannot branch into or out of a try block or its handler using normal control flow instructions. The only way of entering a try block is by either falling through from preceding instructions, or by branching to the first instruction in the block. Once you are inside a try block, you can only leave it by throwing an exception or using the leave <label> instruction to jump to somewhere outside the block and its handler. The leave instructions signals the CLR to execute any finally handlers around the block. Most importantly, you cannot fall out of the block, and you cannot use a ret to return from the containing method (unlike in C#); you have to use leave to branch to a ret elsewhere in the method. As a side effect, leave empties the stack. catch blocks The only way of entering a catch block is if it is run by the SEH. At the start of the block execution, the thrown exception will be the only thing on the stack. The only way of leaving a catch block is to use throw, rethrow, or leave, in a similar way to try blocks. However, one thing you can do is use a leave to branch back to an arbitary place in the handler's try block! In other words, you can do this: .try { // ... newobj instance void [mscorlib]System.Exception::.ctor() throw MidTry: // ... leave.s RestOfMethod } catch [mscorlib]System.Exception { // ... leave.s MidTry } RestOfMethod: // ... As far as I know, this mechanism is not exposed in C# or VB. finally/fault blocks The only way of entering a finally or fault block is via the SEH, either as the result of a leave instruction in the corresponding try block, or as part of handling an exception. The only way to leave a finally or fault block is to use endfinally or endfault (both compile to the same binary representation), which continues execution after the finally/fault block, or, if the block was executed as part of handling an exception, signals that the SEH can continue walking the stack. filter blocks I'll be covering filters in a separate blog posts. They're quite different to the others, and have their own special semantics. Phew! Complicated stuff, but it's important to know if you're writing or outputting exception handlers in IL. Dealing with the C# compiler is probably best saved for the next post.

  Read the article

• NHibernate Pitfalls: Custom Types and Detecting Changes

  - by Ricardo Peres

  This is part of a series of posts about NHibernate Pitfalls. See the entire collection here. NHibernate supports the declaration of properties of user-defined types, that is, not entities, collections or primitive types. These are used for mapping a database columns, of any type, into a different type, which may not even be an entity; think, for example, of a custom user type that converts a BLOB column into an Image. User types must implement interface NHibernate.UserTypes.IUserType. This interface specifies an Equals method that is used for comparing two instances of the user type. If this method returns false, the entity is marked as dirty, and, when the session is flushed, will trigger an UPDATE. So, in your custom user type, you must implement this carefully so that it is not mistakenly considered changed. For example, you can cache the original column value inside of it, and compare it with the one in the other instance. Let’s see an example implementation of a custom user type that converts a Byte[] from a BLOB column into an Image: 1: [Serializable] 2: public sealed class ImageUserType : IUserType 3: { 4: private Byte[] data = null; 5: 6: public ImageUserType() 7: { 8: this.ImageFormat = ImageFormat.Png; 9: } 10: 11: public ImageFormat ImageFormat 12: { 13: get; 14: set; 15: } 16: 17: public Boolean IsMutable 18: { 19: get 20: { 21: return (true); 22: } 23: } 24: 25: public Object Assemble(Object cached, Object owner) 26: { 27: return (cached); 28: } 29: 30: public Object DeepCopy(Object value) 31: { 32: return (value); 33: } 34: 35: public Object Disassemble(Object value) 36: { 37: return (value); 38: } 39: 40: public new Boolean Equals(Object x, Object y) 41: { 42: return (Object.Equals(x, y)); 43: } 44: 45: public Int32 GetHashCode(Object x) 46: { 47: return ((x != null) ? x.GetHashCode() : 0); 48: } 49: 50: public override Int32 GetHashCode() 51: { 52: return ((this.data != null) ? this.data.GetHashCode() : 0); 53: } 54: 55: public override Boolean Equals(Object obj) 56: { 57: ImageUserType other = obj as ImageUserType; 58: 59: if (other == null) 60: { 61: return (false); 62: } 63: 64: if (Object.ReferenceEquals(this, other) == true) 65: { 66: return (true); 67: } 68: 69: return (this.data.SequenceEqual(other.data)); 70: } 71: 72: public Object NullSafeGet(IDataReader rs, String[] names, Object owner) 73: { 74: Int32 index = rs.GetOrdinal(names[0]); 75: Byte[] data = rs.GetValue(index) as Byte[]; 76: 77: this.data = data as Byte[]; 78: 79: if (data == null) 80: { 81: return (null); 82: } 83: 84: using (MemoryStream stream = new MemoryStream(this.data ?? new Byte[0])) 85: { 86: return (Image.FromStream(stream)); 87: } 88: } 89: 90: public void NullSafeSet(IDbCommand cmd, Object value, Int32 index) 91: { 92: if (value != null) 93: { 94: Image data = value as Image; 95: 96: using (MemoryStream stream = new MemoryStream()) 97: { 98: data.Save(stream, this.ImageFormat); 99: value = stream.ToArray(); 100: } 101: } 102: 103: (cmd.Parameters[index] as DbParameter).Value = value ?? DBNull.Value; 104: } 105: 106: public Object Replace(Object original, Object target, Object owner) 107: { 108: return (original); 109: } 110: 111: public Type ReturnedType 112: { 113: get 114: { 115: return (typeof(Image)); 116: } 117: } 118: 119: public SqlType[] SqlTypes 120: { 121: get 122: { 123: return (new SqlType[] { new SqlType(DbType.Binary) }); 124: } 125: } 126: } In this case, we need to cache the original Byte[] data because it’s not easy to compare two Image instances, unless, of course, they are the same.

  Read the article

• Web Services Example - Part 1: Declarative

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 1 of our Web Service examples. In this posting we'll take a look at using a declarative SOAP Web Service. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Defining our Web Service: First off, we should mention that this sample code is using a public web service provided free by CDYNE Corporation that provides weather forecasts by zipcode. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. Let's take a look at the web service.  We created this by using the "Web Service Data Control" from the New Gallery and using this link to this wsdl:  "http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL"   This web service has several methods but we're interested in GetCityForecastByZIP which takes a single string parameter for the zipcode and the second method, GetWeatherInformation that enumerates all possible forecast descriptions and associated image URLs.  The latter we'll use in the next edition but we included it here for completeness. Defing the Application: After adding a feature to the adfmf-feature.xml file, we added a taskflow to host the application flow.  This comprises of a home screen with a list with items for each method in the web service, "Forecast by Zip" and "Weather Info".  In this application we've also decided to hide the navigation bar since there is only one feature in the application. Forecast by Zip: The "Forecast By ZIP" option first presents the user with a screen where they can enter a zipcode and when the "Search" button is tapped, it executes the GetCityForecastByZIP method.  This is done by binding an Action binding to that method. The easiest way to accomplish this is to just drag & drop the method from the Data Control palette to the AMX page and drop it as a button and let the framework hook it up for you.  There is an inputText component on the page that is bound to a pageFlowScope variable called "zip".  This is used as the parameter to the Action binding when it is executed.  Because the actionListener attribute of the commandButton executes the Web Service each time, we ensure that the method is invoked every time the button is clicked. Weather Info: Unlike the previous method, this time instead of explictly executing the web service method we are using deferred invocation.  What this means is that we will bind to the results of the method and the framework will execute the method when it the data is required to be rendered.  We do this by simply doing a drag & drop of the results of the GetWeatherInformation to the AMX page.  When the page is rendered and the bindings are resolved the framework invokes the method.  This executes the method only when it is needed and fills the Data Control provider.  Because we never re-execute the method, you can click from Home to Weather Info and back many times and the web service is only ever invoked once. Issues and Possible Improvements: One thing you will quickly realize with this example is that the error handling is done by the framework for you. For simple examples this is fine but for real applications you'll want to customize these error messages.  With the declarative invocation of web services, this is difficult.  This is one aspect we'll address in the second installment of the web service examples where we will show you how to do programmatic invocation which allows you better error handling. Another issue you will notice with this example is that we can enumerate the weather information but there isn't an easy way to use that information to show the corresponding description and image as part of the forecast results.  We'll show you how to do this in the next example.

  Read the article

• Why googling by keycaptcha gives results on reCAPTCHA? [closed]

  - by vgv8

  EDIT: I'd like to change this title to: How to STOP Google's manipulation of Google search engine presented to general public? I am frequently googling and more and more frequently bump when searching by one software product I am given instead the results on Google's own products. For ex., if I google by keyword keycaptcha for the "Past 24 hours" (after clicking on "Show search tools" -- "Past 24 hours" on the left sidebar of a browser) I am getting the Google's search results show only results on reCAPTCHA. Image uploaded later: Though, if confine keycaptcha in quotes the results are "correct" (well, kind of since they are still distorted in comparison with other search engines). I checked this during few months from different domains at different ISPs, different operating systems and from a dozen of browsers. The results are the same. Why is it and how can it be possibly corrected? My related posts: "How Gmail spam filter works?" IP adresses blacklisting Update: It is impossible for me to directly start using google.com as I am always redirected to google.ru (from google.com) by my ip-address "auto-detect location" google's "convenience". The google's help tells that it is impossible to switch off my location auto-detection because it is very helpful feature. There is a work-around to use google.com/ncr (to get google.com) (?anybody know what does it mean) to prevent redirection from google.com but even. But all results are exactly the same OK, I can search by quoted "keycaptcha", I am already accustomed to these google's quirks, but the question arises why the heck to burn time promoting someone's product if GOOGLE uses other product brands for showing its own interests/brands (reCAPTCHA) instead and what can be done with it? The general user will not understand that he was cheated and just will pick up the first (wrong) results Update2: Note that this googling behaviour: is independent on whether I am logged-in (or log-out-ed of) a google account, which account, on browser (I tried Opera, Chrome, FireFox, IE of different versions, Safari), OS or even domain; there are many such cases but I just targeted one concrete restricted example speciffically to to prevent wandering between unrelated details and peculiarities; @Michael, first it is not true and this text contains 2 links for real and significant results.. I also wrote that this is just one concrete example from many and based on many-month exp. These distortions happen upon clicking on: Past 24 hours, Past week, Past month, Past year in many other keywords, occasions/configurations of searches, etc. Second, the absence of the results is the result and there is no point to sneakingly substitute it by another unsolicited one. It is the definition of spam and scam. 3d, the question is not abt workarounds like how to write search queries or use another searching engines. The question is how to straighten the googling's results in order to stop disorienting general public about. Update: I could not understand: nobody reproduces the described by me behavior (i.e. when I click "Past 24 hours" link in google search searching for keycaptcha, the presented results are only on reCAPTCHA presented)? Update: And for the "Past week":

  Read the article

• Hyper-V for Developers Part 1 Internal Networks

  Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• concurrency::extent<N> from amp.h

  - by Daniel Moth

  Overview We saw in a previous post how index<N> represents a point in N-dimensional space and in this post we'll see how to define the N-dimensional space itself. With C++ AMP, an N-dimensional space can be specified with the template class extent<N> where you define the size of each dimension. From a look and feel perspective, you'd expect the programmatic interface of a point type and size type to be similar (even though the concepts are different). Indeed, exactly like index<N>, extent<N> is essentially a coordinate vector of N integers ordered from most- to least- significant, BUT each integer represents the size for that dimension (and hence cannot be negative). So, if you read the description of index, you won't be surprised with the below description of extent<N> There is the rank field returning the value of N you passed as the template parameter. You can construct one extent from another (via the copy constructor or the assignment operator), you can construct it by passing an integer array, or via convenience constructor overloads for 1- 2- and 3- dimension extents. Note that the parameterless constructor creates an extent of the specified rank with all bounds initialized to 0. You can access the components of the extent through the subscript operator (passing it an integer). You can perform some arithmetic operations between extent objects through operator overloading, i.e. ==, !=, +=, -=, +, -. There are operator overloads so that you can perform operations between an extent and an integer: -- (pre- and post- decrement), ++ (pre- and post- increment), %=, *=, /=, +=, –= and, finally, there are additional overloads for plus and minus (+,-) between extent<N> and index<N> objects, returning a new extent object as the result. In addition to the usual suspects, extent offers a contains function that tests if an index is within the bounds of the extent (assuming an origin of zero). It also has a size function that returns the total linear size of this extent<N> in units of elements. Example code extent<2> e(3, 4); _ASSERT(e.rank == 2); _ASSERT(e.size() == 3 * 4); e += 3; e[1] += 6; e = e + index<2>(3,-4); _ASSERT(e == extent<2>(9, 9)); _ASSERT( e.contains(index<2>(8, 8))); _ASSERT(!e.contains(index<2>(8, 9))); grid<N> Our upcoming pre-release bits also have a similar type to extent, grid<N>. The way you create a grid is by passing it an extent, e.g. extent<3> e(4,2,6); grid<3> g(e); I am not going to dive deeper into grid, suffice for now to think of grid<N> simply as an alias for the extent<N> object, that you create when you encounter a function that expects a grid object instead of an extent object. Usage The extent class on its own simply defines the size of the N-dimensional space. We'll see in future posts that when you create containers (arrays) and wrappers (array_views) for your data, it is an extent<N> object that you'll need to use to create those (and use an index<N> object to index into them). We'll also see that it is a grid<N> object that you pass to the new parallel_for_each function that I'll cover in the next post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• eSTEP Newsletter November 2012

  - by mseika

  Dear Partners,We would like to inform you that the November '12 issue of our Newsletter is now available.The issue contains information to the following topics: News from CorpOracle Celebrates 25 Years of SPARC Innovation; IDC White Papers Finds Growing Customer Comfort with Oracle Solaris Operating System; Oracle Buys Instantis; Pillar Axiom OpenWorld Highlights; Announcement Oracle Solaris 11.1 Availability (data sheet, new features, FAQ's, corporate pages, internal blog, download links, Oracle shop); Announcing StorageTek VSM 6; Announcement Oracle Solaris Cluster 4.1 Availability (new features, FAQ's, cluster corp page, download site, shop for media); Announcement: Oracle Database Appliance 2.4 patch update becomes available Technical SectionOracle White papers on SPARC SuperCluster; Understanding Parallel Execution; With LTFS, Tape is Gaining Storage Ground with additional link to How to Create Oracle Solaris 11 Zones with Oracle Enterprise Manager Ops Center; Provisioning Capabilities of Oracle Enterprise Ops Center Manager 12c; Maximizing your SPARC T4 Oracle Solaris Application Performance with the following articles: SPARC T4 Servers Set World Record on Siebel CRM 8.1.1.4 Benchmark, SPARC T4-Based Highly Scalable Solutions Posts New World Record on SPECjEnterprise2010 Benchmark, SPARC T4 Server Delivers Outstanding Performance on Oracle Business Intelligence Enterprise Edition 11g; Oracle SUN ZFS Storage Appliance Reference Architecture for VMware vSphere4; Why 4K? - George Wilson's ZFS Day Talk; Pillar Axiom 600 with connected subjects: Oracle Introduces Pillar Axiom Release 5 Storage System Software, Driving down the high cost of Storage, This Provisioning with Pilar Axiom 600, Pillar Axiom 600- System overview and architecture; Migrate to Oracle;s SPARC Systems; Top 5 Reasons to Migrate to Oracle's SPARC Systems Learning & EventsRecently delivered Techcasts: Learning Paths; Oracle Database 11g: Database Administration (New) - Learning Path; Webcast: Drill Down on Disaster Recovery; What are Oracle Users Doing to Improve Availability and Disaster Recovery; SAP NetWeaver and Oracle Exadata Database Machine ReferencesARTstor Selects Oracle’s Sun ZFS Storage 7420 Appliances To Support Rapidly Growing Digital Image Library, Scottish Widows Cuts Sales Administration 20%, Reduces Time to Prepare Reports by 75%, and Achieves Return on Investment in First Year, Oracle's CRM Cloud Service Powers Innovation: Applications on Demand; Technology on Demand, How toHow to Migrate Your Data to Oracle Solaris 11 Using Shadow Migration; Using svcbundle to Create SMF Manifests and Profiles in Oracle Solaris 11; How to prepare a Sun ZFS Storage Appliance to Serve as a Storage Devise with Oracle Enterprise Manager Ops Center 12c; Command Summary: Basic Operations with the Image Packaging System In Oracle Solaris 11; How to Update to Oracle Solaris 11.1 Using the Image Packaging System, How to Migrate Oracle Database from Oracle Solaris 8 to Oracle Solaris 11; Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster; Ease the Chaos with Automated Patching: Oracle Enterprise Manager Cloud Control 12c; Book excerpt: Oracle Exalogic Elastic Cloud HandbookYou find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

  Read the article

• Bowing to User Experience

  As a consumer of geeky news it is hard to check my Google Reader without running into two or three posts about Apples iPad and in particular the changes to the developer guidelines which seemingly restrict developers to using Apples Xcode tool and Objective-C language for iPad apps. One of the alternatives to Objective-C affected, is MonoTouch, an option with some appeal to me as it is based on the Mono implementation of C#. Seemingly restricted is the key word here, as far as I can tell, no official announcement has been made about its fate. For more details around MonoTouch for iPhone OS, check out Miguel de Icazas post: http://tirania.org/blog/archive/2010/Apr-28.html. These restrictions have provoked some outrage as the perception is that Apple is arrogantly restricting developers freedom to create applications as they choose and perhaps unwittingly shortchanging iPhone/iPad users who wont benefit from these now never-to-be-made great applications. Apples response has mostly been to say they are concentrating on providing a certain user experience to their customers, and to do this, they insist everyone uses the tools they approve. Which isnt a surprising line of reasoning given Apple restricts the hardware used and content of the apps already. The vogue term for this approach is curated, as in a benevolent museum director selecting only the finest artifacts for display or a wise gardener arranging the plants in a garden just so. If this is what a curated experience is like it is hard to argue that consumers are not responding. My iPhone is probably the most satisfying piece of technology I own. Coming from the Razr, it really was an revolution in how the form factor, interface and user experience all tied together. While the curated approach reinvented the smart phone genre, it is easy to forget that this is not a new approach for Apple. Macbooks and Macs are Apple hardware that run Apple software. And theyve been successful, but not quite in the same way as the iPhone or iPad (based on early indications). Why not? Well a curated approach can only be wildly successful if the curator a) makes the right choices and b) offers choices that no one else has. Although its advantages are eroding, the iPhone was different from other phones, a unique, focused, touch-centric experience. The iPad is an attempt to define another category of computing. Macs and Macbooks are great devices, but are not fundamentally a different user experience than a PC, you still have windows, file folders, mouse and keyboard, and similar applications. So the big question for Apple is can they hold on to their market advantage, continuing innovating in user experience and stay on top? Or are they going be like Xerox, and the rest of the world says thank you for the windows metaphor, now let me implement that better? It will be exciting to watch, with Android already a viable competitor and Microsoft readying Windows Phone 7. And to close the loop back to the restrictions on developing for iPhone OS. At this point the main target appears to be Adobe and Adobe Flash. Apples calculation is that a) they dont need those developers or b) the developers they want will learn Apples stuff anyway. My guess is that they are correct; that as much as I like the idea of developers having more options, I am not going to buy a competitors product to spite Apple unless that product is just as usable. For a non-technical consumer, I dont know that this conversation even factors into the buying decision. If it did, wed be talking about how Microsoft is trying to retake a slice of market share from the behemoth that is Linux.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• The best computer ever

  - by Jeff

  (This is a repost from my personal blog… wow… I need to write more technical stuff!) About three years and three months ago, I bought a 17" MacBook Pro, and it turned out to be the best computer I've ever owned. You might think that every computer with better specs is automatically better than the last, but that hasn't been my experience. My first one was a Sony, back in the Pentium III days, and it cost an astonishing $2,500. That was even more ridiculous in 1999 dollars. It had a dial-up modem, and a CD-ROM, built-in! It may have even played DVD's. A few years later I bought an HP, and it ended up being a pile of shit. The power connector inside came loose from the board, and on occasion would even short. In 2005, I bought a Dell, and it wasn't bad. It had a really high resolution screen (complete with dead pixels, a problem in those days), and it was the first laptop I felt I could do real work on. When 2006 rolled around, Apple started making computers with Intel CPU's, and I bought the very first one the week it came out. I used Boot Camp to run Windows. I still have it in its box somewhere, and I used it for three years. The current 17" was new in 2009. The goodness was largely rooted in having a big screen with lots of dots. This computer has been the source of hundreds of blog posts, tens of thousands of lines of code, video and photo editing, and of course, a whole lot of Web surfing. It connected to corpnet at Microsoft, WiFi in Hawaii and has presented many a deck. It has traveled with me tens of thousands of miles. Last year, I put a solid state drive in it, and it was like getting a new computer. I can boot up a Windows 7 VM in about 19 seconds. Having 8 gigs of RAM has always been fantastic. Everything about it has been fast and fun. When new, the battery (when not using VM's) could get as much as 10 hours. I can still do 7 without much trouble. After 460 charge cycles, the battery health is still between 85 and 90%. The only real negative has been the size and weight. It's only an inch thick, but naturally it's pretty big with a 17" screen. You don't get battery life like that without a huge battery, either, so it's heavy. It was never a deal breaker, but sometimes a long haul across a large airport, you know you're carrying it. Today, Apple announced a new, thinner and lighter 15" laptop, with twice the RAM and CPU cores, and four times the screen resolution. It basically handles my size and weight issues while retaining the resolution, and it still costs less than my 17" did. So I ordered one. Three years is an excellent run, but I kind of budgeted for a new workhorse this year anyway. So if you're interested in a 17" MacBook Pro with a Core 2 Duo 2.66 GHz CPU, 8 gigs of RAM and a 320 gig hard drive (sorry, I'm keeping the SSD), I have one to sell. They've apparently discontinued the 17", which is going to piss off the video community. It's in excellent condition, with a few minor scratches, but I take care of my stuff.

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• Web Service Example - Part 3: Asynchronous

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 3 of our Web Service examples.  In this posting we'll take a look at firing the web service asynchronously and then filling in the UI when it completes.  This can be useful when you have data on the device in a local store and want to show that to the user while the application uses lazy loading from a web service to load more data. Getting the sample code: Just click here to download a zip of the entire project.  You can unzip it and load it into JDeveloper and deploy it either to iOS or Android.  Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed.  Note: This is a different workspace than WS-Part2 What's different? In this example, when you click the Search button on the Forecast By Zip option, now it takes you directly to the results page, which is initially blank.  When the web service returns a second or two later the data pops into the UI.  If you go back to the search page and hit Search it will again clear the results and invoke the web service asynchronously.  This isn't really that useful for this particular example but it shows an important technique that can be used for other use cases. How it was done 1)  First we created a new class, ForecastWorker, that implements the Runnable interface.  This is used as our worker class that we create an instance of and pass to a new thread that we create when the Search button is pressed inside the retrieveForecast actionListener handler.  Once the thread is started, the retrieveForecast returns immediately.  2)  The rest of the code that we had previously in the retrieveForecast method has now been moved to the retrieveForecastAsync.  Note that we've also added synchronized specifiers on both these methods so they are protected from re-entrancy. 3)  The run method of the ForecastWorker class then calls the retrieveForecastAsync method.  This executes the web service code that we had previously, but now on a separate thread so the UI is not locked.  If we had already shown data on the screen it would have appeared before this was invoked.  Note that you do not see a loading indicator either because this is on a separate thread and nothing is blocked. 4)  The last but very important aspect of this method is that once we update data in the collections from the data we retrieve from the web service, we call AdfmfJavaUtilities.flushDataChangeEvents().   We need this because as data is updated in the background thread, those data change events are not propagated to the main thread until you explicitly flush them.  As soon as you do this, the UI will get updated if any changes have been queued. Summary of Fundamental Changes In This Application The most fundamental change is that we are invoking and handling our web services in a background thread and updating the UI when the data returns.  This allows an application to provide a better user experience in many cases because data that is already available locally is displayed while lengthy queries or web service calls can be done in the background and the UI updated when they return.  There are many different use cases for background threads and this is just one example of optimizing the user experience and generating a better mobile application. 

  Read the article

• Criminals and Other Illegal Characters

  - by Most Valuable Yak (Rob Volk)

  SQLTeam's favorite Slovenian blogger Mladen (b | t) had an interesting question on Twitter: http://www.twitter.com/MladenPrajdic/status/347057950470307841 I liked Kendal Van Dyke's (b | t) reply: http://twitter.com/SQLDBA/status/347058908801667072 And he was right!  This is one of those pretty-useless-but-sounds-interesting propositions that I've based all my presentations on, and most of my blog posts. If you read all the replies you'll see a lot of good suggestions.  I particularly like Aaron Bertrand's (b | t) idea of going into the Unicode character set, since there are over 65,000 characters available.  But how to find an illegal character?  Detective work? I'm working on the premise that if SQL Server will reject it as a name it would throw an error.  So all we have to do is generate all Unicode characters, rename a database with that character, and catch any errors. It turns out that dynamic SQL can lend a hand here: IF DB_ID(N'a') IS NULL CREATE DATABASE [a]; DECLARE @c INT=1, @sql NVARCHAR(MAX)=N'', @err NVARCHAR(MAX)=N''; WHILE @c<65536 BEGIN BEGIN TRY SET @sql=N'alter database ' + QUOTENAME(CASE WHEN @c=1 THEN N'a' ELSE NCHAR(@c-1) END) + N' modify name=' + QUOTENAME(NCHAR(@c)); RAISERROR(N'*** Trying %d',10,1,@c) WITH NOWAIT; EXEC(@sql); SET @c+=1; END TRY BEGIN CATCH SET @err=ERROR_MESSAGE(); RAISERROR(N'Ooops - %d - %s',10,1,@c,@err) WITH NOWAIT; BREAK; END CATCH END SET @sql=N'alter database ' + QUOTENAME(NCHAR(@c-1)) + N' modify name=[a]'; EXEC(@sql); The script creates a dummy database "a" if it doesn't already exist, and only tests single characters as a database name.  If you have databases with single character names then you shouldn't run this on that server. It takes a few minutes to run, but if you do you'll see that no errors are thrown for any of the characters.  It seems that SQL Server will accept any character, no matter where they're from.  (Well, there's one, but I won't tell you which. Actually there's 2, but one of them requires some deep existential thinking.) The output is also interesting, as quite a few codes do some weird things there.  I'm pretty sure it's due to the font used in SSMS for the messages output window, not all characters are available.  If you run it using the SQLCMD utility, and use the -o switch to output to a file, and -u for Unicode output, you can open the file in Notepad or another text editor and see the whole thing. I'm not sure what character I'd recommend to answer Mladen's question.  I think the standard tab (ASCII 9) is fine.  There's also several specific separator characters in the original ASCII character set (decimal 28-31). But of all the choices available in Unicode whitespace, I think my favorite would be the Mongolian Vowel Separator.  Or maybe the zero-width space. (that'll be fun to print!)  And since this is Mladen we're talking about, here's a good selection of "intriguing" characters he could use.

  Read the article

• Pinterest and the Rising Power of Imagery

  - by Mike Stiles

  If images keep you glued to a screen, you’re hardly alone. Countless social users are letting their eyes do the walking, waiting for that special photo to grab their attention. And perhaps more than any other social network, Pinterest has been giving those eyes plenty of room to walk. Pinterest came along in 2010. Its play was that users could simply create topic boards and pin pictures to the appropriate boards for sharing. Yes there are some words, captions mostly, but not many. The speed of its growth raised eyebrows. Traffic quadrupled in the last quarter of 2011, with 7.51 million unique visitors in December alone. It now gets 1.9 billion monthly page views. And it was sticky. In the US, the average time a user spends strolling through boards and photos on Pinterest is 15 minutes, 50 seconds. Proving the concept of browsing a catalogue is not dead, it became a top 5 referrer for several apparel retailers like Land’s End, Nordstrom, and Bergdorfs. Now a survey of online shoppers by BizRate Insights says that Pinterest is responsible for more purchases online than Facebook. Over 70% of its users are going there specifically to keep up with trends and get shopping ideas. And when they buy, the average order value is $179. Pinterest is also scoring better in terms of user engagement. 66% of pinners regularly follow and repin retailers, whereas 17% of Facebook fans turn to that platform for purchase ideas. (Facebook still wins when it comes to reach and driving traffic to 3rd-party sites by the way). Social posting best practices have consistently shown that posts with photos are rewarded with higher engagement levels. You may be downright Shakespearean in your writing, but what makes images in the digital world so much more powerful than prose? 1. They transcend language barriers. 2. They’re fun and addictive to look at. 3. They can be consumed in fractions of a second, important considering how fast users move through their social content (admit it, you do too). 4. They’re efficient gateways. A good picture might get them to the headline. A good headline might then get them to the written content. 5. The audience for them surpasses demographic limitations. 6. They can effectively communicate and trigger an emotion. 7. With mobile use soaring, photos are created on those devices and easily consumed and shared on them. Pinterest’s iPad app hit #1 in the Apple store in 1 day. Even as far back as 2009, over 2.5 billion devices with cameras were on the streets generating in just 1 year, 10% of the number of photos taken…ever. But let’s say you’re not a retailer. What if you’re a B2B whose products or services aren’t visual? Should you worry about your presence on Pinterest? As with all things, you need a keen awareness of who your audience is, where they reside online, and what they want to do there. If it doesn’t make sense to put a tent stake in Pinterest, fine. But ignore the power of pictures at your own peril. If not visually, how are you going to attention-grab social users scrolling down their News Feeds at top speed? You’re competing with every other cool image out there from countless content sources. Bore us and we’ll fly right past you.

  Read the article

• Using NSpec at various architectural layers

  - by nono

  Having read the quick start at nspec.org, I realized that NSpec might be a useful tool in a scenario which was becoming a bit cumbersome with NUnit alone. I'm adding an OAuth (or, DotNetOpenAuth) to a website and quickly made a mess of writing test methods such as [Test] public void UserIsLoggedInLocallyPriorToInvokingExternalLoginAndExternalLoginSucceedsAndExternalProviderIdIsNotAlreadyAssociatedWithUserAccount() { ... } ... and I wound up with maybe a dozen permutations of this theme, for the user already being logged in locally and not locally, the external login succeeding or failing, etc. Not only were the method names unwieldy, but every test needed a setup that contained parts in common with a different set of other tests. I realized that NSpec's incremental setup capabilities would work great for this, and for a while I was trucking a long wonderfully, with code like act = () => { actionResult = controller.ExternalLoginCallback(returnUrl); }; context["The user is already logged in"] = () => { before = () => identity.Setup(x => x.IsAuthenticated).Returns(true); context["The external login succeeds"] = () => { before = () => oauth.Setup(x => x.VerifyAuthentication(It.IsAny<string>())).Returns(new AuthenticationResult(true, providerName, "provideruserid", "username", new Dictionary<string, string>())); context["External login already exists for current user"] = () => { before = () => authService.Setup(x => x.ExternalLoginExistsForUser(It.IsAny<string>(), It.IsAny<string>(), It.IsAny<string>())).Returns(true); it["Should add 'login sucessful' alert"] = () => { var alerts = (IList<Alert>)controller.TempData[TempDataKeys.AlertCollection]; alerts[0].Message.should_be_same("Login successful"); alerts[0].AlertType.should_be(AlertType.Success); }; it["Should return a redirect result"] = () => actionResult.should_cast_to<RedirectToRouteResult>(); }; context["External login already exists for another user"] = () => { before = () => authService.Setup(x => x.ExternalLoginExistsForAnyOtherUser(It.IsAny<string>(), It.IsAny<string>(), It.IsAny<string>())).Returns(true); it["Adds an error alert"] = () => { var alerts = (IList<Alert>)controller.TempData[TempDataKeys.AlertCollection]; alerts[0].Message.should_be_same("The external login you requested is already associated with a different user account"); alerts[0].AlertType.should_be(AlertType.Error); }; it["Should return a redirect result"] = () => actionResult.should_cast_to<RedirectToRouteResult>(); }; This approach seemed to work magnificently until I prepared to write test code for my ApplicationServices layer, to which I delegate viewmodel manipulation from my MVC controllers, and which coordinates the operations of the lower data repository layer: public void CreateUserAccountFromExternalLogin(RegisterExternalLoginModel model) { throw new NotImplementedException(); } public void AssociateExternalLoginWithUser(string userName, string provider, string providerUserId) { throw new NotImplementedException(); } public string GetLocalUserName(string provider, string providerUserId) { throw new NotImplementedException(); } I have no idea what in the world to name the test class, the test methods, or even if I should perhaps include the testing for this layer into the test class from my large code snippet above, so that a single feature or user action could be tested without regard to architectural layering. I can't find any tutorials or blog posts which cover more than simple examples, so I would appreciate any recommendations or pointing in the right direction. I would even welcome "your question is invalid"-type answers as long as some explanation is provided.

  Read the article

• Understanding the Value of SOA

  - by Mala Narasimharajan

  Written By: Debra Lilley, ACE Director, Fusion Applications Again I want to talk from my area of expertise of Fusion Applications and talk about their design fundamentals. If you look at the table below and start at the bottom Oracle have defined all of the business objects e.g. accounts, people, customers, invoices etc. used by Fusion Applications; each of these objects contain all of the information required and can be expanded if necessary.  That Oracle have created for each of these business objects every action that is needed for the applications e.g. all the actions to create a new customer, checking to see if it exists, credit checking with D&B (Dun & Bradstreet < http://www.dnb.co.uk/> ) , creating the record, notifying those required etc. Each of these actions is a stand-alone web service. Again you can create a new actions or subscribe to an external provided web service e.g. the D&B check. The diagram also shows that all of development of Fusion Applications is from their Fusion Middleware offerings. Then the Intelligent Business Process is the order in which you run these actions, this is Service Orientated Architecture, SOA. Not only is SOA used to orchestrate actions within Fusion Applications it is also used in the integration of Fusion Applications with the rest of the Oracle stable of applications such as EBS, PeopleSoft, JDE and Siebel. The other applications are written with propriety development tools so how do they work with SOA? It’s a very simple answer, with the introduction of the Oracle SOA platform each process within these applications was made available to be called as a web service. I won’t go into technically how that is done but what’s known as a wrapper to allow each of them to act in this way was added. Finally at the top of the diagram are the questions that each Fusion Application process must answer, and this is the ‘special’ sauce that makes them so good, the User Experience, but that is a topic for another day, or you can read about it in my blog http://debrasoracle.blogspot.co.uk/2014/04/going-on-record-about-fusion-apps-cloud.html or Oracle’s own UX blog https://blogs.oracle.com/usableapps/ The concept behind AppAdvantage is not new the idea that Oracle technology can add value to your Oracle applications investments is pretty fundamental. Nishit Rao who is in AppAdvantage team provided myself and other ACE Directors with demo kits so that we could demonstrate SOA running with the applications. The example I learnt to build was that of the EBS inventory open interface. The simple concept is that request records can be added to a table and an import run that creates these as transactions in inventory. What’s SOA allows you to do is to add to the table from any source and then run this process automatically whereas traditionally you had to run the process at regular intervals because you didn’t know if the table was empty or not. This may just sound like a different way of doing the same thing but if the process is critical for your business then the interval was very small and the process run potentially many times unnecessarily. Using SOA it only happened when necessary without any delay. So in my post today I’ve talked about how SOA is used with Fusion Applications and in the linking with more traditional applications but that is only the tip of the iceberg of potential, your applications are just part of your IT systems and SOA can orchestrate your data across all of them; the beauty of open standards.  Debra Lilley, Fusion Champion, UKOUG Board Member, Fusion User Experience Advocate and ACE Director.  Lilley has 18 years experience with Oracle Applications, with E Business Suite since 9.4.1, moving to Business Intelligence Team Lead and Oracle Alliance Director. She has spoken at over 100 conferences worldwide and posts at debrasoraclethoughts

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• Disabling the right-click sub menu using JQuery

  - by nikolaosk

  Recently I needed to disable the right-click contextual menu in an HTML page for a very simple HTML application I was creating for a friend.This is going to be a short post where I will demonstrate how to disable the right-click contextual menu.I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadPlease find here all my posts regarding JQuery.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. I am going to create a very simple HTML 5 page with some text and an image. The HTML markup for the page follows. <!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>        <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">     <script type="text/javascript" src="jquery-1.8.2.min.js">        </script><script type="text/javascript"> (function ($) { $(document).bind('contextmenu', function () { return false;}); })(jQuery); </script>       </head>  <body>      <div id="header">      <h1>Learn cutting edge technologies</h1>      <h2>HTML 5, JQuery, CSS3</h2>    </div>      <figure>  <img src="html5.png" alt="HTML 5"></figure>        <div id="main">          <h2>HTML 5</h2>                        <article>          <p>            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>          </article>      </div>             </body>  </html> This is the JQuery code, I use (function ($) { $(document).bind('contextmenu', function () { return false;}); })(jQuery); I simply disable/cancel the contextmenu event.When I load the simple page on the browser and I right-click the context menu does not appear.Hope it helps!!!

  Read the article

• MVVM/Presentation Model With WinForms

  - by Erik Ashepa

  Hi, I'm currently working on a brownfield application, it's written with winforms, as a preparation to use WPF in a later version, out team plans to at least use the MVVM/Presentation model, and bind it against winforms... I've explored the subject, including the posts in this site (which i love very much), when boiled down, the main advantage of wpf are : binding controls to properties in xaml. binding commands to command objects in the viewmodel. the first feature is easy to implement (in code), or with a generic control binder, which binds all the controls in the form. the second feature is a little harder to implement, but if you inherit from all your controls and add a command property (which is triggered by an internal event such as click), which is binded to a command instance in the ViewModel. The challenges I'm currently aware of are : implementing a commandmanager, (which will trigger the CanInvoke method of the commands as necessery. winforms only supports one level of databinding : datasource, datamember, wpf is much more flexible. am i missing any other major features that winforms lacks in comparison with wpf, when attempting to implement this design pattern? i sure many of you will recommend some sort of MVP pattern, but MVVM/Presentation model is the way to go for me, because I'll want future WPF support. Thanks in advance, Erik.

  Read the article

• How to enable gzip HTTP compression on Windows Azure dynamic content

  - by Steven

  Hi all, I've been trying unsuccessfully to enable gzip HTTP compression on my Windows Azure hosted WCF Restful service which returns JSON only from GET and POST requests. I have tried so many things that I would have a hard time listing all of them, and I now realise I have been working with conflicting information (regarding old version of azure etc) so think it best to start with a clean slate! I am working with Visual Studio 2008, using the February 2010 tools for Visual Studio. So, according to the following link, HTTP compression has now been enabled .. http://msdn.microsoft.com/en-us/library/ff436045.aspx ... and I've used the advice at the following page (the URL compression advice only), but I get no compression. http://blog.smarx.com/posts/iis-compression-in-windows-azure <urlCompression doStaticCompression="true" doDynamicCompression="false" dynamicCompressionBeforeCache="true" /> It doesn't help that I don't know what the difference is between urlCompression and httpCompression. I've tried to find out but to no avail! Could the fact that the tools for Visual Studio were released before the version of Azure which supports compression be a problem? I read somewhere that with the latest tools, you can choose which version of Azure OS you want to use when you publish ... but I don't know if that's true, and if it is, I can't find where to choose. Could I be using a pre-http enabled version? I've also tried blowery http compression module, but no results. Does any one have any up-to-date advice on how to achieve this? i.e. advice that relates to the current version of the Azure OS. Cheers! Steven

  Read the article

• Stateful vs. Stateless Webservices

  - by chrsk

  Imagine a more complex CRUD application which has a three-tier-architecture and communicates over webservices. The client starts a conversation to the server and doing some wizard like stuff. To process the wizard the client needs feedback given by the server. We started a discussion about stateful or stateless webservices for this approach. I made some research combined with my own experience, which points me to the question mentioned later. Stateless webservices having the following properties (in our case): + high scalability + high availability + high speed + rapid testing - bloated contract - implementing more logic on server-side But we can cross out the first two points, our application doesn't needs high scalability and availability. So we come to the stateful webservice. I've read a bunch of blogs and forum posts and the most invented point implementing a stateful webservice was: + simplifies contract (protocol) - bad testing - runs counter to the basic architecture of http But doesn't almost all web applications have these bad points? Web applications uses cookies, query strings, session ids, and all the stuff to avoid the statelessness of http. So why is it that bad for webservices?

  Read the article

• TeamCity stopped working once I added NUnit to the mix

  - by Dave

  I'm struggling a lot trying to get our build server going. I am currently running tests in a Windows XP virtual machine, and have installed TeamCity v5.0.3, build 10821. I am using NUnit v2.5.3. I finished the initial setup with TeamCity without any issues at all, provided that I use the sln2008 build runner that makes the entire process almost brainless. It's really quite nice that way, and very satisfying to see your first successful automated build. Now it's time to kick it up a notch and I wanted to get NUnit working. I keep the NUnit 2.5.3 assemblies in an external libs folder in SVN, so I checked that out onto the test system. I selected NUnit 2.5.3 from the build runner options, as the online instructions had recommended. But when I build, I get the following error: Window1.xaml.cs(14,7): error CS0246: The type or namespace name ‘NUnit’ could not be found (are you missing a using directive or an assembly reference?) Window1.xaml.cs(28,10): error CS0246: The type or namespace name ‘Test’ could not be found (are you missing a using directive or an assembly reference?) Window1.xaml.cs(28,10): error CS0246: The type or namespace name ‘TestAttribute’ could not be found (are you missing a using directive or an assembly reference?) Everything compiles great in the IDE. From finding blog posts and submitting comments, I got some advice and confirmed the following: I have the HintPath value set properly in my project file (points to the external lib) I can also do a full Release and Debug build from the command line using msbuild I have tried do use the NUnit installer so nunit.framework.dll gets registered into the GAC I have changed the build agent's logon account to be a user on the test system, rather than LOCAL SYSTEM. Nothing seems to help... can anyone else here offer me some advice on what to try next?

  Read the article

• converting 2D mouse coordinates to 3D space in OpenGL ES

  - by Jayesh

  I want to convert mouse's current X and Y coordinates into the 3D space I have drawn in the viewport. I need to do this on the OpenGL ES platform. I found following possible solutions implemented in OpenGL, but none fits what I am looking for. I found NeHe's tutorial on doing exactly this, but in traditional OpenGL way. It uses gluUnProject. http://nehe.gamedev.net/data/articles/article.asp?article=13 Although gluUnProject is not available in OpenGL ES, its implementation seems simple enough to port back. But before calling it, we need to call glReadPixels with GL_DEPTH_COMPONENT and that is not possible in OpenGL ES. (The reason I found in this thread: http://www.khronos.org/message_boards/viewtopic.php?f=4&t=771) What I want to do is similar to picking, except that I don't want to select the object but I want exact coordinates so that I can recognize particular portion of the object that is currently under mouse cursor. I went through the Picking tutorials in this answer. http://stackoverflow.com/posts/2211312/revisions But they need glRenderMode, which I believe is absent in OpenGL ES. If you know how to solve this problem in OpenGL ES, please let me know. Thanks.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >