Search Results

Search found 4944 results on 198 pages for 'track'.

Page 138/198 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Is it possible to shrink the size of an HP Smart Array logical drive?

  - by ewwhite

  I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

  Read the article

• How can the little guys effectively learn and use puppet?

  - by drumfire

  Six months ago, in our not-for-profit project we decided to start migrating our system management to a Puppet controlled environment because we are expecting our number of servers to grow substantially between now and a year from now. Since the decision has been made our IT guys have become a bit too annoyed a bit too often. Their biggest objections are: "We're not programmers, we're sysadmins"; Modules are available online but many differ from one another; wheels are being reinvented too often, how do you decide which one fits the bill; Code in our repo is not transparent enough, to find how something works they have to recurse through manifests and modules they might have even written themselves a while ago; One new daemon requires writing a new module, conventions have to be similar to other modules, a difficult process; "Let's just run it and see how it works" Tons of hardly known 'extensions' in community modules: 'trocla', 'augeas', 'hiera'... how can our sysadmins keep track? I can see why a large organisation would dispatch their sysadmins to puppet courses to become puppet masters. But how would smaller players get to learn puppet to a professional level if they do not go to courses and basically learn it via their browser and editor?

  Read the article

• How does a vsftpd server work and how to configure it?

  - by ysap

  I was asked to configure a FTP server, based on the vsftpd package. The server is running on a remote machine to which I have a superuser privilege access. Being unfamiliar with the mechanics of FTP servers, I tried to figure out how user ftp accounts are configured. The previous maintainer used a shell script, which works on a list that we maintain to track users accounts and passwords, to configure the ftp accounts. From reading the script, I see that he generates a list of usernames and passwords, and actually creates a user account on the Linux machine. This means that for each user that we configure in the list, a new user account is being added by the adduser command: adduser --home /home/ftp --no-create-home $user (but w/o a private /home/username directory - using the /home/ftp instaed). Each of these users can log into his account using the ssh command. This fact seems a little strange to me, as I'd think that the ftp account should be decoupled from the Ubuntu user accounts. As another side effect, when a user connects using a web browser, he is connected to the /home/ftp directory. However, he can then use "Up to a higher level directory" link to go up and effectively have access to all of our system. So, the questions are: Is this really how the FTP server supposed to work in terms of configuring ftp accounts? If not, how do I configure the vsftpd server in a way that I have only the superuser Ubuntu account on that machine and all ftp account are... just FTP user accounts? Additionally, these ftp account should be configured in terms of how and what they are allowed to access.

  Read the article

• SQL Server 2005 Express: upgrading to SP3 in mixed-mode installations

  - by Jeroen Pluimers

  I'm having trouble upgrading SQL Server 2005 Express SP1 to SP3. The SP1 install uses mixed mode authentication (so there is an sa password). This is the message I get: TITLE: Microsoft SQL Server Setup ------------------------------ None of the selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine. To continue, click Back and then select features to install. To exit SQL Server Setup, click Cancel. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.4035.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28108 ------------------------------ BUTTONS: OK ------------------------------ The link then tells me To continue you must provide a strong sa password. I tried some searching, and found something about BPAClient.dll, but this batch-file does not fix it: mkdir "%ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\BPA\BPAClient" copy "%ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\BPA\bin\BPAClient.dll" "%ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\BPA\BPAClient\" So I think the clue is the strong in the link above. Am I on the right track? Where do I find more information on the strongness of an sa password? --jeroen (who will adjust the question when he has dug further)

  Read the article

• PHP unable to load dynamic library... but it is loaded. WTF?

  - by Josh

  I have a CentOS 5.4 server with Apache 2.2.3, mod_fastcgi and PHP 5.2.11. Everything is working great, server is a production server and I've had no complaints. When I was looking in PHP's error log to diagnose a problem with a specific page, I saw the following periodically repeated over and over: [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/apc.so' - /usr/lib/php/modules/apc.so: undefined symbol: php_rfc1867_callback in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pdo_mysql.so' - /usr/lib/php/modules/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/apc.so' - /usr/lib/php/modules/apc.so: undefined symbol: php_rfc1867_callback in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pdo_mysql.so' - /usr/lib/php/modules/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0 I am very confused because APC is loaded, I can see it in the output of phpinfo(). And by the look of these error messages nothing should be working at all. Yet sites seem to be running fine. How can I track down the source of this error?

  Read the article

• SNAT through Racoon IPSec VPN

  - by Mite fine d'ailes

  I am trying to route traffic from a device (that I will call "target") connected to my Ubuntu box (that I will call "host") to servers at a remote office. The host uses a Racoon IPSec VPN, connected through a NIC called efix. This creates an aliased IF called efix:0 which has IP adress 192.168.190.132. It is able to reach the servers. The link between host and target is an Ethernet link, using IP adresses 10.0.0.1 on IF eusb for the host and 10.0.0.2 on IF eth0 for the target. I have setup the following routes and iptables entries: On target: 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.0.1 0.0.0.0 UG 0 0 0 eth0 On host: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -j SNAT --to 192.168.190.132 iptables -A FORWARD -s 10.0.0.0/24 -j ACCEPT iptables -A FORWARD -d 10.0.0.0/24 -j ACCEPT Using Wireshark to monitor an HTTP GET, I can see SYN packets from the target go all the way to the server, but the server's SYNACK packets stop at the host and are not forwarded to the target. Am I missing something here ? Isn't SNAT supposed to keep track of the connections ?

  Read the article

• How to list rpm packages/subpackages sorted by total size

  - by smci

  Looking for an easy way to postprocess rpm -q output so it reports the total size of all subpackages matching a regexp, e.g. see the aspell* example below. (Short of scripting it with Python/PERL/awk, which is the next step) (Motivation: I'm trying to remove a few Gb of unnecessary packages from a CentOS install, so I'm trying to track down things that are a) large b) unnecessary and c) not dependencies of anything useful like gnome. Ultimately I want to pipe the ouput through sort -n to what the space hogs are, before doing rpm -e) My reporting command looks like [1]: cat unwanted | xargs rpm -q --qf '%9.{size} %{name}\n' > unwanted.size and here's just one example where I'd like to see rpm's total for all aspell* subpackages: root# rpm -q --qf '%9.{size} %{name}\n' `rpm -qa | grep aspell` 1040974 aspell 16417158 aspell-es 4862676 aspell-sv 4334067 aspell-en 23329116 aspell-fr 13075210 aspell-de 39342410 aspell-it 8655094 aspell-ca 62267635 aspell-cs 16714477 aspell-da 17579484 aspell-el 10625591 aspell-no 60719347 aspell-pl 12907088 aspell-pt 8007946 aspell-nl 9425163 aspell-cy Three extra nice-to-have things: list the dependencies/depending packages of each group (so I can figure out the uninstall order) Also, if you could group them by package group, that would be totally neat. Human-readable size units like 'M'/'G' (like ls -h does). Can be done with regexp and rounding on the size field. Footnote: I'm surprised up2date and yum don't add this sort of intelligence. Ideally you would want to see a tree of group-package-subpackage, with rolled-up sizes. Footnote 2: I see yum erase aspell* does actually produce this summary - but not in a query command. [1] where unwanted.txt is a textfile of unnecessary packages obtained by diffing the output of: yum list installed | sed -e 's/\..*//g' > installed.txt diff --suppress-common-lines centos4_minimal.txt installed.txt | grep '>' and centos4_minimal.txt came from the Google doc given by that helpful blogger.

  Read the article

• Juniper router dropping pings to external interface

  - by Alexander Garden

  My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

  Read the article

• missing network usage through iptables

  - by Purres

  I inserted a rule to iptables to track the input usage to a certain ip address. The vps server's IP is 192.168.1.5 and the guest os's IP is 192.168.1.115. I ran 'yum update' inside the guest OS to get some network traffic. Then I ran iptables -vnL from the hypervisor. However it only showed network usage to the host, but not to the guest. Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target source destination 0 0 0.0.0.0/0 0.0.0.0/0 destination IP range 192.168.1.115-192.168.1.115 1853 114K 0.0.0.0/0 0.0.0.0/0 destination IP range 192.168.1.5-192.168.1.5 I ran tcpdump and the log showed that there're data packets to the guest os. 16:17:43.932514 IP mirrordenver.fdcservers.net.http > 192.168.1.115.34471: Flags [.], seq 17694667:17696115, ack 1345, win 113, options [nop,nop,TS val 1060308643 ecr 1958781], length 1448 16:17:43.932559 IP 192.168.1.115.34471 > mirrordenver.fdcservers.net.http: Flags [.], ack 17696115, win 15287, options [nop,nop,TS val 1958869 ecr 1060308643], length 0 Why the guest OS network usage couldn't be tracked? iptables -L will return the INPUT chain as following: Chain INPUT (policy ACCEPT) target prot opt source destination all -- anywhere anywhere destination IP range 192.168.1.115-192.168.1.115 all -- anywhere anywhere destination IP range 192.168.1.5-192.168.1.5 all -- anywhere anywhere

  Read the article

• Tomato OS: "memory exhausted" running vi .... how to solve?

  - by Sam Jones

  I have set up tomato (shibby) on an asus RT-N66U router. It works great. I loaded up a few pieces, like transmission and optware. I can run vi, but when I run vi it fails with a "memory exhausted" error, and the terminal session hangs. For reference: If I simply start "vi" it runs fine. But if I specify vi I get the memory exhausted error, even if the file I am opening is just a couple of hundred bytes in size (like fstab). I discovered that my swap partition was not properly set up, so I did that. The swapon command now indicates I really do have a swap: [root@MyRouter samba]$ swapon -s Filename Type Size Used Priority /dev/sda1 partition 32900860 0 1 How can I get vi to work? Thanks! System setup reference information: asus RT-N66U router 2TB usb hard drive partitions on hard drive: Disk /dev/sda: 2000.4 GB, 2000398839808 bytes 255 heads, 63 sectors/track, 30400 cylinders Units = cylinders of 16065 * 4096 = 65802240 bytes Disk identifier: 0xfacbc8ab Device Boot Start End Blocks Id System /dev/sda1 1 512 32900868 82 Linux swap / Solaris /dev/sda2 513 29000 1830638880 83 Linux running samba memory: $ cat /proc/meminfo MemTotal: 255840 kB MemFree: 210980 kB Buffers: 5264 kB Cached: 22768 kB SwapCached: 0 kB Active: 20272 kB Inactive: 11448 kB HighTotal: 131072 kB HighFree: 99868 kB LowTotal: 124768 kB LowFree: 111112 kB SwapTotal: 32900860 kB SwapFree: 32900860 kB Dirty: 0 kB Writeback: 0 kB TIA!

  Read the article

• Recommendations for secure business collaboration tools

  - by Michael Prescott

  I'm searching for a secure and easy way for business partners to collaboratively edit and exchange documents, share calendars, create schedules, and assign tasks. I speculate that the ideal collaboration environment or work-flow would actually involve several technologies and services. My co-workers and I have tried a variety of things from Google Apps to Wiki's, but nothing feels very fluid or complete. I suppose defining what we need and our constraints is probably in order: collaboratively edit basic text documents and spreadsheets exchange documents like flow-charts, graphs, and files generated by our other desktop applications, but not source code assign tasks to each other and ourselves and track the history of those tasks easily see when relevant documents have been modified since last viewing and ability to easily push notifications to relevant workers (a clean front page that shows updates would probably suffice) provide limited access to contract workers and guests users if a remote user system is compromised (keystroke logger or other spyware) we don't want the criminal to be able to gain access to all business documents (processes, trade-secrets, customer lists, etc.) simply because they gained access to a single Google account (or whatever web service) Cannot be a difficult to administer VPN infrastructure Cannot cost more than $100 per month (yeah, money is tight) Needs to support up to 25 users We can host our own web applications, but it must be low maintenance solution

  Read the article

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• how to correctly mount fat32 partition in Ubuntu in order to preserve case

  - by Dean

  I've found there are couple of problems might be related how my FAT32 partition was mounted. I hope you can help me to solve the problem. I also included the command I used to help others when they find this post, sorry to those might feel I should use less space. I've the following file structures on my disk dean@notebook:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x08860886 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS In the etc/fstab I've got UUID=91c57a65-dc53-476b-b219-28dac3682d31 / ext4 defaults 0 1 UUID=BEA2A8AFA2A86D99 /media/NTFS ntfs-3g quiet,defaults,locale=en_US.utf8,umask=0 0 0 UUID=0C0C-9BB3 /media/FAT32 vfat user,auto,utf8,fmask=0111,dmask=0000,uid=1000 0 0 /dev/sda5 swap swap sw 0 0 /dev/sda1 /media/sda1 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 /dev/sda2 /media/sda2 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 I checked my id using id and I've got dean@notebook:~$ id uid=1000(dean) gid=1000(dean) groups=4(adm),20(dialout),24(cdrom),46(plugdev),103(fuse),104(lpadmin),115(admin),120(sambashare),1000(dean) I don't know why with these settings I still have problem of using svn like in this one Thank you for your help!

  Read the article

• Port forwarding for samba

  - by EternallyGreen

  Alright, here's the setup: Internet - Modem - WRT54G - hubs - winxp workstations & linux smb server. Its basically a home-style distributed internet connection setup, except its at a school. What I want is remote, offsite smb access. I figured I'd need to find out which ports need forwarding and then forward them to the server on the router. I'm told in another question on SF that multiple ports will need forwarding, and it gets somewhat complicated. One of the things I need to know is which ports require forwarding for this, and what complications or vulnerabilities could arise from this. Any additional information you think I should have before doing this would be great. I'm told SMB doesn't support encryption, which is fine. Given I set up authentication/access control, all this means is that once one of my users authenticates and starts downloading data, the unencrypted traffic could be intercepted and read by a MITM, correct? Given that that's the only problem arising from lack of encryption, this is of no concern to me. I suppose that it could also mean a MITM injecting false data into the data stream, eg: user requests file A, MITM intercepts and replaces the contents of file A with some false data. This isn't really an issue either, because my users would know that something was wrong, and its not likely anyone would have incentive to do this anyway. Another thing I've been informed of is Microsoft's poor implementation of SMB, and its crap track record for security. Does this apply if only the client-end is MS? My server is linux.

  Read the article

• SMTP Unreachable from Specific Networks

  - by Jason George

  I host my business site through a VPS account. The instance runs Ubuntu and I'm using POSTFIX+Dovecot as my mail server. For the most part, the mail server works fine. I have noticed, however, that I can not send mail from specific local networks. I noticed this at a client's office serval months ago. I can receive email, but any time I tried to send mail when connected to their network the connection would time out. Since I could send my mail after leaving, I chalked it up to improper network configuration and didn't worry about it. Unfortunately I've recently moved, switched service providers, and am forced to use the service providers router due to the special set-up they put in place to give me DSL in the sticks--well beyond the typical range for a DSL run. Now I'm unable to send email from home, which is a problem. I have tried sending email through my phone (using cellular service rather than my DSL) just to confirm the server is currently working. I'm not even sure where start debugging. Any ideas on how I might track down the issue would be greatly appreciated.

  Read the article

• Hyperic HQ- Monitor process statistics for 50+ processes on Linux machine

  - by Chris

  Is there an easy way to get metrics on all processes that start with the letters XYZ? I have about 80 processes that I have to monitor individually that all start with the prefix XYZ. I have created a query using the sigar shell: ps State.Name.sw=XYZ, which will give me a list of the processes that I want. What I need to do is define this list of processes through said query and collect and track statistics from the Process service: http://support.hyperic.com/display/hypcomm/Process+service What I need is 3 or 4 key statistics for each of the XYZ processes defined by my query to show up as graphs in the web front end. Note: Hyperic HQ server is installed on a windows machine and I'm monitoring a Linux box via an agent. Thanks, Chris Edit: Here is my try at a plugin that may give me what I want, but it's not being inventoried/detected by the Hyperic web UI. Simply pointing me to one of Hyperic's tutorials won't do. Thanks. <!DOCTYPE plugin [ <!ENTITY process-metrics SYSTEM "/pdk/plugins/process-metrics.xml">]> <plugin> <server name="ABCStats"> <config> <option name="process.query" description="Process Query" default="State.Name.sw=XYZ"/> </config> <metric name="Availability" alias="Availability" template="sigar:Type=ProcState,Arg=%process.query%:State" category="AVAILABILITY" indicator="true" units="percentage" collectionType="dynamic"/> &process-metrics; <plugin type="autoinventory"/> <plugin type="measurement" class="org.hyperic.hq.product.MeasurementPlugin"/> </server> </plugin>

  Read the article

• how to uninstall ubuntu 8 from ubuntu 10 dual boot

  - by umar

  I have ubuntu 8.04 and ubuntu 10.04 on my laptop, and i want to reclaim all the ubuntu 8 space so that i have just one operating system on my laptop. how can i do it? the output of sudo fdisk -l is as follows: sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31a431a3 Device Boot Start End Blocks Id System /dev/sda1 * 1 4959 39833136 83 Linux /dev/sda2 4960 5233 2200905 82 Linux swap / Solaris /dev/sda3 5234 12852 61192552 83 Linux /dev/sda4 12852 19458 53062657 5 Extended /dev/sda5 12852 19182 50847744 83 Linux /dev/sda6 19182 19458 2213888 82 Linux swap / Solaris i dont know which of sda1, ..., sda 6 etc ubuntu 8 is on. how can i find that out? The actual task is that i think a lot of space is devoted to ubuntu 8, if there is no easy way to get rid of it, then i want to repartition the disk so that about 50 GB of hard disk space is given to ubuntu 10's home folder from the ubuntu 8's home folder. but i hope that there is an easy way to get rid of ubuntu 8 alrogether and just have ubuntu 10 on my system.

  Read the article

• OS/X 10.6 Bizarre login bug: Making alternative "Others..." appear. Why does this happen?

  - by bjornl

  I am studying at NUS in Singapore, and they have a mac-equipped computer lab here at school. All users (students) have our own personal accounts that we use to log in to the computers with. Sometimes when you approach a computer to log in only the alternative "thinkmac", which is the school's administrator account, I presume. Some other computers have the alternative "thinkmac" as well as "Others..." where you can input your own login credentials. One day as I sat down by a computer and there was only the "thinkmac" alternative. I was about to get up and find another one when the guy sitting next to me says - Just click 'thinkmac' - the computer will ask for your password - then hit escape to get back to the login screen. Repeat until "Others..." appear. So: If you click any user account, hit ESC to get taken back to the login screen, repeat for 5-10x, eventually the alternative "Others..." will appear. Why is this? Is there an internal counter that keeps track on how many times you have clicked a/any given user account, and after a certain threshold it displays the "Others"? What is the logical reasoning behind this?

  Read the article

• Recommendation for Document Management Solution

  - by BillN

  We've just been informed by our software vendor that the custom document management system they'd written is no longer in development, and will not be supported in the future. So we are looking at new document management systems. Requirements: Multiple input vectors, we receive documents via e-mail, fax, scanning, and from the originating application Ability to Redact or obscure data. Customers may fax an order with CC data, we want to attach the image of the order form with the order record, but the CC data needs to be protected. Same with Tax IDs. Certain users should be able to see the redacted data, but access should be logged. Version control on documents. We'd like Product Development and Marketing to be able to track various versions of documents like Packaging Designs, but ensure that users have the latest approved version. AD integration, my users don't need another password. Ability to integrate to other apps. Our current system, offers function keys in the order-entry system, that will spawn the viewer application, and open the correct document. Mass import facility, we have a half a terabyte of existing documents in the old system that we would like to import. Retention Policy. I'd like a way to have the system comply with the corporate retention policy, so that when a document of a certain type reaches a certain age, it gets deleted, or atleast marked for manual deletion. We are a Windows Server and HP-UX shop. Does anybody have any experience with Document Management systems that they would like to share? Thanks.

  Read the article

• Locating memory leak in Apache httpd process, PHP/Doctrine-based application

  - by Sam

  I have a PHP application using these components: Apache 2.2.3-31 on Centos 5.4 PHP 5.2.10 Xdebug 2.0.5 with Remote Debugging enabled APC 3.0.19 Doctrine ORM for PHP 1.2.1 using Query Caching and Results Caching via APC MySQL 5.0.77 using Query Caching I've noticed that when I start up Apache, I eventually end up 10 child processes. As time goes on, each process will grow in memory until each one approaches 10% of available memory, which begins to slow the server to a crawl since together they grow to take up 100% of memory. Here is a snapshot of my top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1471 apache 16 0 626m 201m 18m S 0.0 10.2 1:11.02 httpd 1470 apache 16 0 622m 198m 18m S 0.0 10.1 1:14.49 httpd 1469 apache 16 0 619m 197m 18m S 0.0 10.0 1:11.98 httpd 1462 apache 18 0 622m 197m 18m S 0.0 10.0 1:11.27 httpd 1460 apache 15 0 622m 195m 18m S 0.0 10.0 1:12.73 httpd 1459 apache 16 0 618m 191m 18m S 0.0 9.7 1:13.00 httpd 1461 apache 18 0 616m 190m 18m S 0.0 9.7 1:14.09 httpd 1468 apache 18 0 613m 190m 18m S 0.0 9.7 1:12.67 httpd 7919 apache 18 0 116m 75m 15m S 0.0 3.8 0:19.86 httpd 9486 apache 16 0 97.7m 56m 14m S 0.0 2.9 0:13.51 httpd I have no long-running scripts (they all terminate eventually, the longest being maybe 2 minutes long), and I am working under the assumption that once each script terminates, the memory it uses gets deallocated. (Maybe someone can correct me on that). My hunch is that it could be APC, since it stores data between requests, but at the same time, it seems weird that it would store data inside the httpd process. How can I track down which part of my app is causing the memory leak? What tools can I use to see how the memory usage is growing inside the httpd process and what is contributing to it?

  Read the article

• Easy solution to monitoring & blocking connections to non-malicious services, IP's, and tracking companies

  - by binarybunny

  Our family lives in the middle of nowhere, so the only high-speed internet available is Verizon's 3G mobile broadband. We have the highest package available, yet continually go over the 10GB limit and get charged $10 every 1GB we go over. We run a business from home, so stopping when we hit the limit is not an option. I've found the majority of connections are to Google, Microsoft, Akamai, Facebook, and other web service companies (mainly google). I know these are harmless connections, but when it costs money for them to monitor our web activity it becomes a serious problem. Here's some things I've done, but I'm sure there's something else that could help before blocking a huge set of IP ranges: stopped using windows (on my machine) use MVPS host file on all computers use firefox on all computers (with don't track me option) ad block plugin on all browsers blocking google updates blocking windows updates block images in browsers (when possible) use comodo (paranoia-level style of blocking..) virus-free computers with ESET NOD32 bought router and installed dd-wrt in attempt to block connections more diligently (and throttle bandwidth if it comes to that) Anything I'm missing? I know Google analytics is on almost all websites, as well as FB like buttons but I would like to be able to stop these connections without blocking use of google services like gmail, etc. Any ideas?

  Read the article

• WT-NMP - PHP-CGI randomly stops running with no error log

  - by alexfontaine

  We have recently installed WT-NMP and are currently running Php-Cgi with php 5.4.24. We are running fairly simple php scripts and when testing everything is running fine. Over the weekend we wanted to keep the server running test it over a longer period of time. The server and scripts ran fine all day on Friday, but sometime late on Saturday, the php-cgi stopped running. There are no errors in the error log (C:\WT-NMP\log). In the configuration (php.ini) I have the following options set: error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On html_errors = On error_log = "c:/wt-nmp/log/php_error.log" We also have the standard nginx.conf error logs: access_log "c:/wt-nmp/log/nginx_access.log"; error_log "c:/wt-nmp/log/nginx_error.log" warn; So, since the log directory is empty, I am assuming that the running php scripts and general nginx operations are not causing the php-cgi to stop. So my questions are: What else could cause the php-cgi to stop running? Are there any other options for logging that we could turn on that could help us track this down? Are there other log locations that we should be looking at? Thanks!

  Read the article

• Hyperic HQ- Monitor process statistics for 50+ processes on Linux machine

  - by Chris

  Is there an easy way to get metrics on all processes that start with the letters XYZ? I have about 80 processes that I have to monitor individually that all start with the prefix XYZ. I have created a query using the sigar shell: ps State.Name.sw=XYZ, which will give me a list of the processes that I want. What I need to do is define this list of processes through said query and collect and track statistics from the Process service: http://support.hyperic.com/display/hypcomm/Process+service What I need is 3 or 4 key statistics for each of the XYZ processes defined by my query to show up as graphs in the web front end. Note: Hyperic HQ server is installed on a windows machine and I'm monitoring a Linux box via an agent. Thanks, Chris Edit: Here is my try at a plugin that may give me what I want, but it's not being inventoried/detected by the Hyperic web UI. Simply pointing me to one of Hyperic's tutorials won't do. Thanks. <!DOCTYPE plugin [ <!ENTITY process-metrics SYSTEM "/pdk/plugins/process-metrics.xml">]> <plugin> <server name="ABCStats"> <config> <option name="process.query" description="Process Query" default="State.Name.sw=XYZ"/> </config> <metric name="Availability" alias="Availability" template="sigar:Type=ProcState,Arg=%process.query%:State" category="AVAILABILITY" indicator="true" units="percentage" collectionType="dynamic"/> &process-metrics; <plugin type="autoinventory"/> <plugin type="measurement" class="org.hyperic.hq.product.MeasurementPlugin"/> </server> </plugin>

  Read the article

• EXCEL generate a character in one column of a row, only if other columns in the same row are not bl

  - by Simon

  My speadsheet keeps track of when patients leave a specific floor of the hospital. There are columns in which where each patient goes is documented (1 column for "home", another column for "rehab facility", another for "other floor", etc.). Only when the patient leaves the hospital altogether does it count as a discharge, in which case the “discharge” column needs to have something in it. What formula can I use to generate, say, an "x" in the "discharge" column if certain "where they went" columns in the same row contain something, but not if there is nothing in any of them? Currently, to accomplish this I am using =IF(OR(M30,N30,O30,P30,Q30,R30,S30),"x") in row 3 of the "discharge" column (rows 1 and 2 are headings), and I have used "fill down" in all subsequent rows. To suppress the "FALSE" this formula yields when the condition is not true, I have applied conditonal formatting to the entire column that if the value=FALSE then the font is white (same colour as background). Is there a more efficient, elegant and idiot-proof way of doing this? The conditional formatting of text colour could potentially confuse everyone but the person who built the spreadsheet (me).

  Read the article

• IIS High use & Server Performance issues

  - by HaydnWVN

  Have an SBS2011 running Exchange, a database app and a few other things serving 5 users (3 low use, 1 high). The server was never specced for the database app so it isn't as powerful as I'd like... Only 12GB RAM. We have increasingly found performance problems with this server, last week it was so bad I couldn't even connect remotely. To free up some available RAM I have (over the past month or so): Restricted the Exchange Message Store to 1GB with (so far) no ill effects. Restricted SQL Databases (including SBSMonitoring and Sharepoint/##SSEE (Which isn't used)). Now I am finding that IIS Worker threads are using up the available memory and I have (so far) been unable to track down much useful information about restricting them. This server is not 'serving' anything web-based apart from OWA that I am finding people using because Outlook is so slow (again related to the Servers performance). I am aware that Exchange on SBS2011 is designed to use up available resources (and concede when other applications request). But it is not doing so (or anywhere near fast enough) for our needs. Opening the database application (using Postgres) takes 5+ minutes from client machines and regularly times out or crashes due to this. After a reboot (before SQL/Exchange/IIS databases are very large/totally cached) we get the performace we need and expect. Previously a reboot once a month was enough... Then once a week... Now they have taken to rebooting it almost daily!

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >