Search Results

Search found 486 results on 20 pages for 'boundary'.

Page 14/20 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Finding a shared HDD attached to the network from my F-13 machine

  - by Ramy

  Sorry for the slew of n00bie questions, but here is one more. I recently partitioned my 1.5TB harddrive according to this question I then bought this to attach the harddrive to my network. The problem is, how do I navigate to the hard drive to move files over the network to the HDD. should this be moved to serverfault? update: the disk isn't even showing up when i call "fdisk -l" (as root). How can I mount it if I can't even find it? [root@Moonface ~]# /sbin/fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00018598 Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 19458 155777024 8e Linux LVM Disk /dev/dm-0: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 4764 MB, 4764729344 bytes 255 heads, 63 sectors/track, 579 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table Disk /dev/dm-2: 101.0 GB, 101032394752 bytes 255 heads, 63 sectors/track, 12283 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-2 doesn't contain a valid partition table

  Read the article

• Mailman delivery troubles

  - by stanigator

  I'm not sure if this is a good place to ask this question. It's about mailing list management software called Mailman from GNU. Here are the details: Hosting provider: Vlexofree Domain: www.sysil.com with Google Apps Mailing List created from hosting cpanel: [email protected] I have registered a list of subscribers, and tried sending an email to [email protected]. I got the following error message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://mail.google.com/support/bin/answer.py?answer=6596 23si6479194ewy.44 (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.216.90.136 with SMTP id e8mr1469147wef.110.1264220118960; Fri, 22 Jan 2010 20:15:18 -0800 (PST) Date: Fri, 22 Jan 2010 20:15:18 -0800 Message-ID: <[email protected]> Subject: From: Stanley Lee <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=0016e6dab0931bccc3047dcd2f1e - Show quoted text - Is there any way of fixing this problem? I would like to be able to have this mailing list to work through my hosting and domain. Thanks in advance.

  Read the article

• Exchange SBS 2003 server stopped receiving mail over the weekend, senders getting "Relay access deni

  - by Charlie W.

  Firstly, I should say that I know my way around Windows very well, I don't really know the first thing about Exchange. I am trying to support a user that is running an SBS2003 Server with Exchange. Over the weekend, everyone sending something to any of his addresses gets an error message like the following: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <[email protected]>: Relay access denied (state 14). ----- Original message ----- Received: by 10.114.18.7 with SMTP id 7mr5572745war.127.1275423472120; Tue, 01 Jun 2010 13:17:52 -0700 (PDT) MIME-Version: 1.0 Sender: [email protected] Received: by 10.143.10.15 with HTTP; Tue, 1 Jun 2010 13:17:32 -0700 (PDT) From: My Name <[email protected]> Date: Tue, 1 Jun 2010 15:17:32 -0500 X-Google-Sender-Auth: XiPrP8Em_6Eb94EH9m84nJVGvCY Message-ID: <[email protected]> Subject: TEST To: Client <[email protected]> Content-Type: multipart/alternative; boundary=001636b1484ffe72470487fdaa5b There are a host of errors in the Application log, but nothing that leaps out at me as being obvious. But then again, I don't really know what I'm looking for. Any help would be greatly appreciated.

  Read the article

• Allignment of ext3 partition on LVM RAID volume group

  - by John P

  I'm trying to add a partition on a LVM that resides on a RAID6 volume group and fdisk is complaining about the partition not residing on a physical sector boundry. My question is, how do you calculate the correct starting sector for a partition on a LVM? This partition will be formated ext3. Would it be better to just format the LVM directly instead of creating a new partition? Disk /dev/dedvol/backup: 2199.0 GB, 2199023255552 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 1048576 bytes / 8388608 bytes Disk identifier: 0x4e428f49 Device Boot Start End Blocks Id System /dev/dedvol/backup1 63 267349 2146982827+ 83 Linux Partition 1 does not start on physical sector boundary. lvdisplay /dev/dedvol/backup --- Logical volume --- LV Name /dev/dedvol/backup VG Name dedvol LV UUID OV2n5j-7LHb-exJL-t8dI-dU8A-2vxf-uIicCt LV Write Access read/write LV Status available # open 0 LV Size 2.00 TiB Current LE 524288 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 32768 Block device 253:1 vgdisplay dedvol --- Volume group --- VG Name dedvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 14.55 TiB PE Size 4.00 MiB Total PE 3815448 Alloc PE / Size 3670016 / 14.00 TiB Free PE / Size 145432 / 568.09 GiB VG UUID 8fBcOk-aXGx-P3Qy-VVpJ-0zK1-fQgy-Cb691J

  Read the article

• How can I filter data based on items in a list?

  - by user2964366

  How can I filter entries containing any specific word in a list of words? For example, I have a list of road names in Singapore. Amoy Street, Singapore Ann Siang Hill Anson Road Arab Street Armenian Street, Singapore BBaghdad Street (Singapore) Balestier Road Banda Street Bartley Road Beach Road, Singapore Bencoolen Street Bernam Street Boat Quay Boon Tat Street Boundary Road, Singapore Bras Basah Road Bugis Street Bukit Batok Road Bukit Pasoh Road Bukit Timah Road CCantonment Road, Singapore Choa Chu Kang Road Clarke Quay Clementi Road Club Street Collyer Quay Connaught Drive Craig Road (Singapore) Cross Street and many more My spreadsheet has a large number of entries like the following, which may or may not contain road names mentioned in my list: Saw an accident at Thomson Road Found this by accident 6 vehicles crashed at Balestier Road I wanna crash now. So tired. Bus collides with bicycle at Arab Street. Accident at City Road. You can crash my house later. How do I filter to return entries that contains any road name identified in the list of names? How do I introduce an array/list of road names into Microsoft Excel and then relate it to a filter function?

  Read the article

• Problems using InfraRecorder to back up ISOs of certain CDs

  - by Voyagerfan5761

  I've gotten into the habit of backing up my CDs as ISO files, just in case the discs should be damanged, lost, or destroyed. Using InfraRecorder, the process is pretty painless. Unfortunately, I have run into at least two discs that don't back up. I get the error message: Can't read source disc. Retrying from sector 252270 Sometimes this will appear repeatedly. One of the discs is my retail copy of Star Trek: Armada II; the other is disc one of DOOM 3. Both discs run flawlessly when I put them in the drive and let Windows AutoPlay them. Armada II appears as two tracks (one data, one audio) in InfraRecorder, and the error happens at the approximate track boundary. DOOM 3's first disc, however, fails much sooner (around sector 990) and appears as one solid data track. Am I simply using the wrong tools for this job? InfraRecorder is a nice free tool that I can run from my flash drive and use for most tasks of this type, but it does seem to have trouble with certain things. Ideally I'd like to hear about any workarounds people have found for this issue, but if I must switch tools I'm open to it (preferably other free tools).

  Read the article

• Fix bad superblock on logical partition

  - by Chris

  I was following http://www.howtoforge.com/linux_resi...xt3_partitions and when i reboot and run: root@Microknoppix:/home/knoppix# fsck -n /dev/sda7 fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda7 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> so i ran e2fsck with all the block numbers that you need (forget exactly what tool i used to find where the superblocks are hidden) no dice then i ran testdisk and had it look for the superblock, no results anyone have any ideas? fdisk -l for reference: root@Microknoppix:/home/knoppix# fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x97646c29 Device Boot Start End Blocks Id System /dev/sda1 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 38912 312046593 f W95 Ext'd (LBA) /dev/sda5 64 326 2104320 82 Linux swap / Solaris /dev/sda6 * 327 2938 20972544 83 Linux /dev/sda7 2938 38912 288968672+ 83 Linux To be honest it looks like I lost it... Next step if that happens is to dump the partition to an image file and hope i can find or write some software to parse through the data looking for known file headers, i think.

  Read the article

• Mailman delivery troubles

  - by stanigator

  I have apparently posted at the wrong place (superuser.com) for this question, so I'll just repost it here. Hope those of you who read both sites are not going to be offended. It's about mailing list management software called Mailman from GNU. Here are the details: Hosting provider: Vlexofree Domain: www.sysil.com with Google Apps Mailing List created from hosting cpanel: [email protected] I have registered a list of subscribers, and tried sending an email to [email protected]. I got the following error message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://mail.google.com/support/bin/answer.py?answer=6596 23si6479194ewy.44 (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.216.90.136 with SMTP id e8mr1469147wef.110.1264220118960; Fri, 22 Jan 2010 20:15:18 -0800 (PST) Date: Fri, 22 Jan 2010 20:15:18 -0800 Message-ID: <[email protected]> Subject: From: Stanley Lee <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=0016e6dab0931bccc3047dcd2f1e - Show quoted text - Is there any way of fixing this problem? I would like to be able to have this mailing list to work through my hosting and domain. Thanks in advance.

  Read the article

• Fast extraction of a time range from syslog logfile?

  - by mike

  I've got a logfile in the standard syslog format. It looks like this, except with hundreds of lines per second: Jan 11 07:48:46 blahblahblah... Jan 11 07:49:00 blahblahblah... Jan 11 07:50:13 blahblahblah... Jan 11 07:51:22 blahblahblah... Jan 11 07:58:04 blahblahblah... It doesn't roll at exactly midnight, but it'll never have more than two days in it. I often have to extract a timeslice from this file. I'd like to write a general-purpose script for this, that I can call like: $ timegrep 22:30-02:00 /logs/something.log ...and have it pull out the lines from 22:30, onward across the midnight boundary, until 2am the next day. There are a few caveats: I don't want to have to bother typing the date(s) on the command line, just the times. The program should be smart enough to figure them out. The log date format doesn't include the year, so it should guess based on the current year, but nonetheless do the right thing around New Year's Day. I want it to be fast -- it should use the fact that the lines are in order to seek around in the file and use a binary search. Before I spend a bunch of time writing this, does it already exist?

  Read the article

• Cut (smart edit) .mts (AVCHD Progressive) files un Ubuntu Lucid

  - by pts

  I have a bunch of .mts files containing AVCHD Progressive video recorded by a Panasonic camera, and I need software on Ubuntu Lucid with which I can remove the boring parts, and concatenate the interesting parts, all this without reencoding the video stream. It's OK for me to cut at keyframe boundary. If Avidemux was able to open the files, it would take about 60 hours of work for me to cut the files. (At least that was it last time I tried with similar videos, but of a file format supported by Avidemux.) So I need a fast, powerful and stable video editor, because I don't want that 60 hours of work go up to 240 or even 480 hours just because the tool is too slow or unstable or has a terrible UI. I've tried Avidemux 2.5.5 and 2.5.6, but they crash trying to open such a file, even if I convert the file to .avi first using mencoder -oac copy -ovc copy. mplayer can play the files. I've tried Avidemux 2.6.0, which can open the file, but it cannot jump to the previous or next keyframe etc. (if I make it jump to the next keyframe, and then to the previous keyframe, it doesn't end up at the original keyframe, sometimes displays an error etc.). Also I'm not sure if Avidemux 2.6.x would let me save the result without reencoding. I've tried Kdenlive 0.7.7.1, but playback is very choppy, and it cannot play audio at all (complaining that SDL cannot find the device; but many other programs on the system can play audio). It would be a pain to work with. I've tried converting the .mts file to .mkv using ffmpeg -i input.mts -vcodec copy -sameq -acodec copy -f matroska output.mkv, but that caused too much visible distortions in the video in both mplayer and Avidemux. I've tried converting the .mts file with TsRemux.exe, but Avidemux 2.5.x still can't open that file. Is there another program to cut and concatenate the files? Is there a preprocessor which would create a file (without reencoding the video) on which Avidemux wouldn't crash?

  Read the article

• Messed up partitions... system will not boot!

  - by someguy

  I did a really dumb thing. cfdisk threw an error at me saying "FATAL ERROR: Bad primary partition 3: Partition ends in the final partial cylinder", so I installed Partition Table Doctor to see if I could fix the problem. When the program started up, it told me there were problems with my partitions, and asked if I wanted them fixed (cannot remember real message, but I believe it had something to do with the cylinder boundaries), so, blindly, without thinking of the consequences, I did. Now, my system will not boot. I tried booting from the Windows 7 installation CD. I went to install a fresh copy, but it said that "No drives were found". I then opened up diskpart. According to diskpart, there is only one partition, containing one volume, assigned the letter "C". Before, I had four partitions! It is also saying that the file system is RAW. Is there any way I can fix this? I have important data that I do not want to lose. Later on... I tried fdisk with the option -l, which lists the partition table(s), and this is what I got: Ignoring extra extended partition 4 Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 64 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x163df116 Device Boot Start End Blocks Id System /dev/sda1 6 18 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 18 7851 62918572+ 7 HPFS/NTFS /dev/sda3 13073 30402 139196416 f W95 Ext'd (LBA) /dev/sda3 13073 30402 139196416 f W95 Ext'd (LBA) /dev/sda3 13073 30403 139203193 7 HPFS/NTFS I don't know if this will help, but it's extra information, at least. Also, this is how I had my partitions: 40MB (Unallocated) 100MB (System Reserved) 60GB (Windows, C:) 40GB (Was reserved for secondary OS) ~132GB (Home, E:)

  Read the article

• Ping with explicit next-hop selection (aka Monitoring multiple default gateways)

  - by Michuelnik

  I have a linux (debian) router with two internet connections (A) and (B). (A) is preferred, (B) is fallback. I want to monitor the internet connection (and not only the availability of the gateways!) and change the default route appropriately. If (A) is not providing internet, switch to (B) If (A) is providing internet again, switch back to (A). Only problem I have is in case (2). My routing table points towards a working internet so I cannot easily detect whether internet is working over link (A) again. I am search for a ping or traceroute (or other diagnosis-tool) which can select the next-hop explicitly. ping -r looks promising, but can only ping a host on the lan. (It only has to write another destination address in the packet, damnit!) traceroute -g gateway looks even more promising and nearly does what I want - but sets source routing options which my next-hops deny. (Not within my administrative boundary...) I just want a $ping, that can: select a source interface (and address) select a next-hop on that interface ping any arbitrary ip address I could do evil trickery with policy-based routing but that would have production impact for all users. I would like to see a side-effect-free solution....

  Read the article

• disk partition centos

  - by FlourishDNA

  I am setting up server for hosting two WordPress which has size of around 70GB. I have already installed CentOS as OS and I would like to partition the Disk. Is there any tool which can help me or can someone guide me though the process as I am not expert is SSH commands. Here are some output that might help. OS: CentOS release 6.3 fdisk -l Disk /dev/xvdb: 214.7 GB, 214748364800 bytes 255 heads, 63 sectors/track, 26108 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b91e0 Device Boot Start End Blocks Id System Disk /dev/xvda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e542c Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvda2 64 2611 20458496 8e Linux LVM Disk /dev/mapper/vg_flourish-lv_root: 16.7 GB, 16718495744 bytes 255 heads, 63 sectors/track, 2032 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_flourish-lv_swap: 4227 MB, 4227858432 bytes 255 heads, 63 sectors/track, 514 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 df Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/vg_flourish-lv_root 16070076 758184 14495560 5% / tmpfs 958500 0 958500 0% /dev/shm /dev/xvda1 495844 31926 438318 7% /boot df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_flourish-lv_root 16G 741M 14G 5% / tmpfs 937M 0 937M 0% /dev/shm /dev/xvda1 485M 32M 429M 7% /boot Thanks

  Read the article

• Potential impact of large broadcast domains

  - by john

  I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

  Read the article

• .NET Remoting Exception not handled Client-Side

  - by DanJo519

  I checked the rest of the remoting questions, and this specific case did not seem to be addressed. I have a .NET Remoting server/client set up. On the server side I have an object with a method that can throw an exception, and a client which will try to call that method. Server: public bool MyEquals(Guid myGuid, string a, string b) { if (CheckAuthentication(myGuid)) { logger.Debug("Request for \"" + a + "\".Equals(\"" + b + "\")"); return a.Equals(b); } else { throw new AuthenticationException(UserRegistryService.USER_NOT_REGISTERED_EXCEPTION_TEXT); } } Client: try { bool result = RemotedObject.MyEquals(myGuid, "cat", "dog"); } catch (Services.Exceptions.AuthenticationException e) { Console.WriteLine("You do not have permission to execute that action"); } When I call MyEquals with a Guid which causes CheckAuthentication to return false, .NET tries to throw the exception and says the AuthenticationException was unhandled. This happens server side. The exception is never marshaled over to the client-side, and I cannot figure out why. All of the questions I have looked at address the issue of an exception being handled client-side, but it isn't the custom exception but a base type. In my case, I can't even get any exception to cross the remoting boundary to the client. Here is a copy of AuthenticationException. It is in the shared library between both server and client. [Serializable] public class AuthenticationException : ApplicationException, ISerializable { public AuthenticationException(string message) : base(message) { } public AuthenticationException(SerializationInfo info, StreamingContext context) : base(info, context) { } #region ISerializable Members void ISerializable.GetObjectData(SerializationInfo info, StreamingContext context) { base.GetObjectData(info, context); } #endregion }

  Read the article

• Binary serialization/de-serialization in C++ and C#

  - by 6pack kid

  Hello. I am working on a distributed application which has two components. One is written in standard C++ (not managed C++) and the other one is written in C#. Both are communicating via a message bus. I have a situation in which I need to pass objects from C++ to C# application and for this I need to serialize those objects in C++ and de-serialize them in C# (something like marshaling/un-marshaling in .NET). I need to perform this serialization in binary and not in XML (due to performance reasons). I have used Boost.Serialization to do this when both ends were implemented in C++ but now that I have a .NET application on one end, Boost.Serialization is not a viable solution. I am looking for a solution that allows me to perform (de)serialization across C++ and .NET boundary i.e., cross platform binary serialization. I know I can implement the (de)serialization code in a C++ dll and use P/Invoke in the .NET application, but I want to keep that as a last resort. Also, I want to know if I use some standard like gzip, will that be efficient? Are there any other alternatives to gzip? What are the pros/cons of them? Thanks

  Read the article

• DataTable.Select Behaves Strangely Using ISNULL Operator on NULL DateTime Column

  - by Paul Williams

  I have a DataTable with a DateTime column, "DateCol", that can be DBNull. The DataTable has one row in it with a NULL value in this column. I am trying to query rows that have either DBNull value in this column or a date that is greater than today's date. Today's date is 5/11/2010. I built a query to select the rows I want, but it did not work as expected. The query was: string query = "ISNULL(DateCol, '" + DateTime.MaxValue + "'") > "' + DateTime.Today "'" This results in the following query: "ISNULL(DateCol, '12/31/9999 11:59:59 PM') > '5/11/2010'" When I run this query, I get no results. It took me a while to figure out why. What follows is my investigation in the Visual Studio immediate window: > dt.Rows.Count 1 > dt.Rows[0]["DateCol"] {} > dt.Rows[0]["DateCol"] == DBNull.Value true > dt.Select("ISNULL(DateCol,'12/31/9999 11:59:59 PM') > '5/11/2010'").Length 0 <-- I expected 1 Trial and error showed a difference in the date checks at the following boundary: > dt.Select("ISNULL(DateCol, '12/31/9999 11:59:59 PM') > '2/1/2000'").Length 0 > dt.Select("ISNULL(DateCol, '12/31/9999 11:59:59 PM') > '1/31/2000'").Length 1 <-- this was the expected answer The query works fine if I wrap the DateTime field in # instead of quotes. > dt.Select("ISNULL(DateCol, #12/31/9999#) > #5/11/2010#").Length 1 My machine's regional settings is currently set to EN-US, and the short date format is M/d/yyyy. Why did the original query return the wrong results? Why would it work fine if the date was compared against 1/31/2000 but not against 2/1/2000?

  Read the article

• Parse MIME messages

  - by Abhimanyu

  Hi, For my new project which has email module.i need to show all the email information on web.when i m making a call to server i m getting the base64 encoded mime data. after applying base64 decoding technique i m getting the mime data as follows: /*****************Mime data start *******************************/ From [email protected] Tue Jun 23 12:01:02 2009 Date: Tue, 23 Jun 2009 12:01:02 +0530 From: Prashant R Naik <[email protected]> To: [email protected] Subject: This is a test mail Message-ID: <[email protected]> Reply-To: Prashant R Naik <[email protected]> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="ReaqsoxgOBHFXBhH" Content-Disposition: inline User-Agent: Mutt/1.5.18 (2008-05-17) Status: RO Content-Length: 1912 Lines: 52 --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Test mail. Initiated by prashant Regards, -- Prashant R Naik Principal Technologist | Symbian & Web2.0 Geodesic Limited | www.geodesic.com Tel: +91-80-66551000 --ReaqsoxgOBHFXBhH Content-Type: image/gif Content-Disposition: attachment; filename="trash.gif" Content-Transfer-Encoding: base64 R0lGODlhEAAQANUoADJ8wTqU2DmR1TqV2DN9wTSBxTWFyTaGyTJ9wTWGyTaKzjmS1TOAxTuV 2DaFyTN8wDiN0jiO0jSAxTeKzjqS1DN8wTqR1TWFyjB4vTOBxTmO0TmS1DaKzTeJzTqV1zSA xDJ8wDqS1TeKzTF4vDF4vTiO0f///zuX2gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAACgALAAA AAAQABAAAAaDQNRpSCwWhcakcsk8mZ5Qpik5pUKvT2W1uDVWp+BiYNAImAZmz/lcDoQEFoFp QTFtTPKFQLCAREolJiURJhCCJhqAJRMiIhwmjSYdJgqUjQoODgkJJgecBp0mBgYXBx8ZBQxY UAUSDAUACLEPDwgEAAAEIBUEtygkIyMkwMMYw8EjKEEAOw== --ReaqsoxgOBHFXBhH Content-Type: image/jpeg Content-Disposition: attachment; filename="bx.jpg" Content-Transfer-Encoding: base64 /9j/4AAQSkZJRgABAQEASABIAAD/2wBDAAEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQH/2wBDAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQH/wAAR CAAUAAoDAREAAhEBAxEB/8QAFQABAQAAAAAAAAAAAAAAAAAAAAn/xAAYEAEAAwEAAAAAAAAA AAAAAAAAGWen5//EABQBAQAAAAAAAAAAAAAAAAAAAAD/xAAUEQEAAAAAAAAAAAAAAAAAAAAA /9oADAMBAAIRAxEAPwCb4AJHym0Vp3PQJTaK07noJHgA/9k= --ReaqsoxgOBHFXBhH Content-Type: image/png Content-Disposition: attachment; filename="day_bg.png" Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAGQAAAApCAYAAADDJIzmAAAABmJLR0QA/wD/AP+gvaeTAAAA CXBIWXMAAAsTAAALEwEAmpwYAAAAB3RJTUUH2AwCCS0kTriU2QAAAB10RVh0Q29tbWVudABD cmVhdGVkIHdpdGggVGhlIEdJTVDvZCVuAAAAXElEQVR42u3bQQEAMAgDMZiqiZtP5AwbfeQk NO/WvPtLMR0TABEQIAICRECACAgQAREQIAICRECACAgQAREQIAICRECACAgQAREQIAICRECA CAgQARGQ7NpPPasFT+0FZPjBRwYAAAAASUVORK5CYII= --ReaqsoxgOBHFXBhH-- /*****************Mime data end *******************************/ now the problem is i have to parse this data and use it in my application.since this data is not a xml so it difficult to parse it (because parsing with some tag is easy).so any one who knows how to parse mime data help be.i m using erlang to parse this data. Thank you in advance

  Read the article

• DDD: Aggregate Roots

  - by Mosh

  Hello, I need help with finding my aggregate root and boundary. I have 3 Entities: Plan, PlannedRole and PlannedTraining. Each Plan can include many PlannedRoles and PlannedTrainings. Solution 1: At first I thought Plan is the aggregate root because PlannedRole and PlannedTraining do not make sense out of the context of a Plan. They are always within a plan. Also, we have a business rule that says each Plan can have a maximum of 3 PlannedRoles and 5 PlannedTrainings. So I thought by nominating the Plan as the aggregate root, I can enforce this invariant. However, we have a Search page where the user searches for Plans. The results shows a few properties of the Plan itself (and none of its PlannedRoles or PlannedTrainings). I thought if I have to load the entire aggregate, it would have a lot of overhead. There are nearly 3000 plans and each may have a few children. Loading all these objects together and then ignoring PlannedRoles and PlannedTrainings in the search page doesn't make sense to me. Solution 2: I just realized the user wants 2 more search pages where they can search for Planned Roles or Planned Trainings. That made me realize they are trying to access these objects independently and "out of" the context of Plan. So I thought I was wrong about my initial design and that is how I came up with this solution. So, I thought to have 3 aggregates here, 1 for each Entity. This approach enables me to search for each Entity independently and also resolves the performance issue in solution 1. However, using this approach I cannot enforce the invariant I mentioned earlier. There is also another invariant that states a Plan can be changed only if it is of a certain status. So, I shouldn't be able to add any PlannedRoles or PlannedTrainings to a Plan that is not in that status. Again, I can't enforce this invariant with the second approach. Any advice would be greatly appreciated. Cheers, Mosh

  Read the article

• [AS3] BitmapData cut-off

  - by Fristi

  Hello, I am writing a MovieClip rasterizer which rasterizes all the frames in the specified movieclip. Here's the code for rasterizing: for ( var i:int = start; i <= end; i++ ) { //goto the next frame clip.gotoAndStop( i ); //get the bounds bounds = clip.getBounds(clip); //create a new bitmapdata container bitmapData = new BitmapData( transformer.width == -1 ? bounds.width : transformer.width, transformer.height == -1 ? bounds.height : transformer.height, transformer.transparent, transformer.color ); //rotate the clip if (clip.rotation != 0) transformer.rotate( clip.rotation * (Math.PI / 180) ); //scale the clip if (clip.scaleX != 1 || clip.scaleY != 1) transformer.scale( clip.scaleX, clip.scaleY ); //translate the movieclip to its zero point if (transformer.matrix.tx == 0 && transformer.matrix.ty == 0) transformer.translateToZero( bounds ); //draw the bitmap data with the transformers bitmapData.draw( this._source, transformer.matrix, transformer.colorTransform, transformer.blendMode, transformer.clipRect, //new Rectangle(0, 0, bounds.width, bounds.height), transformer.smoothing ); //push the data on the array frames.push( bitmapData ); } Now the result is different - http://i42.tinypic.com/lfv52.jpg - (note the head and left shoe). Anyone knows what the problem is? I've seen people adding 'extra' pixels to their boundary box at the BitmapData constructor, but thats nasty imo.

  Read the article

• Is there a difference between plain text emails, and multipart emails with only plain text?

  - by Brian Armstrong

  I'm using Rails to send emails and I just want to send a plain text email (there is no corresponding HTML part). I've noticed that if I just have one file named email.text.plain.erb it actually generates a multipart email with one part (the plain text part) like this: Content-Type: multipart/alternative; boundary=mimepart_4c04a2d34c4bb_690a4e56b0362 --mimepart_4c04a2d34c4bb_690a4e56b0362 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: Quoted-printable Content-Disposition: inline text of the email here... --mimepart_4c04a2d34c4bb_690a4e56b0362-- But if I take out the text.plain part and name it email.erb ActionMailer generates a regular plain text email without multipart like this: Content-Type: text/plain; charset=utf-8 text of the email here... Both work fine most of the time (so this is kind of nitpicky), but I guess my question is whether the second one is more correct. My goal here is just to make sure deliverability is as high as possible across a wide variety of devices and email clients. I've read that plain text emails can have slightly better deliverability rates than html and was just curious if throwing in this multipart (even if it only contained a plain text part) might throw off some of the dumber email clients. Thanks for your help!

  Read the article

• Removing padding from structure in kernel module

  - by dexkid

  I am compiling a kernel module, containing a structure of size 34, using the standard command. make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules The sizeof(some_structure) is coming as 36 instead of 34 i.e. the compiler is padding the structure. How do I remove this padding? Running make V=1 shows the gcc compiler options passed as make -I../inc -C /lib/modules/2.6.29.4-167.fc11.i686.PAE/build M=/home/vishal/20100426_eth_vishal/organised_eth/src modules make[1]: Entering directory `/usr/src/kernels/2.6.29.4-167.fc11.i686.PAE' test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /home/vishal/20100426_eth_vishal/organised_eth/src/.tmp_versions ; rm -f /home/vishal/20100426_eth_vishal/organised_eth/src/.tmp_versions/* make -f scripts/Makefile.build obj=/home/vishal/20100426_eth_vishal/organised_eth/src gcc -Wp,-MD,/home/vishal/20100426_eth_vishal/organised_eth/src/.eth_main.o.d -nostdinc -isystem /usr/lib/gcc/i586-redhat-linux/4.4.0/include -Iinclude -I/usr/src/kernels/2.6.29.4-167.fc11.i686.PAE/arch/x86/include -include include/linux/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Os -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Iarch/x86/include/asm/mach-generic -Iarch/x86/include/asm/mach-default -Wframe-larger-than=1024 -fno-stack-protector -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -pg -Wdeclaration-after-statement -Wno-pointer-sign -fwrapv -fno-dwarf2-cfi-asm -DTX_DESCRIPTOR_IN_SYSTEM_MEMORY -DRX_DESCRIPTOR_IN_SYSTEM_MEMORY -DTX_BUFFER_IN_SYSTEM_MEMORY -DRX_BUFFER_IN_SYSTEM_MEMORY -DALTERNATE_DESCRIPTORS -DEXT_8_BYTE_DESCRIPTOR -O0 -Wall -DT_ETH_1588_051 -DALTERNATE_DESCRIPTORS -DEXT_8_BYTE_DESCRIPTOR -DNETHERNET_INTERRUPTS -DETH_IEEE1588_TESTS -DSNAPTYPSEL_TMSTRENA_TEVENTENA_TESTS -DT_ETH_1588_140_147 -DLOW_DEBUG_PRINTS -DMEDIUM_DEBUG_PRINTS -DHIGH_DEBUG_PRINTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(eth_main)" -D"KBUILD_MODNAME=KBUILD_STR(conxt_eth)" -c -o /home/vishal/20100426_eth_vishal/organised_eth/src/eth_main.o /home/vishal/20100426_eth_vishal/organised_eth/src/eth_main.c

  Read the article

• How to get the coordinate of Gridlayout

  - by Jessy

  Hi, I set my JPanel to GridLayout (6,6), with dimension (600,600) Each cell of the grid will display one pictures with different widths and heights. The picture first add to a JLabel, and the JLabel then added to the cells. How can retrieved the coordinate of the pictures in the cells and not the coordinate of cells? So far the out give these coordinate which equal height and width even on screen the pictures showed in different sizes. e.g. java.awt.Rectangle[x=100,y=100,width=100,height=100] java.awt.Rectangle[x=200,y=100,width=100,height=100] java.awt.Rectangle[x=300,y=100,width=100,height=100] The reason why I used GridLayout instead of gridBagLayout is that, I want each pictures to have boundary. If I use GridBagLayout, the grid will expand according to the picture size. I want grid size to be in fix size. JPanel pDraw = new JPanel(new GridLayout(6,6)); pDraw.setPreferredSize(new Dimension(600,600)); for (int i =0; i<(6*6); i++) { //get random number for height and width of the image int x = rand.nextInt(40)+(50); int y = rand.nextInt(40)+(50); ImageIcon icon = createImageIcon("bird.jpg"); //rescale the image according to the size selected Image img = icon.getImage().getScaledInstance(x,y,img.SCALE_SMOOTH); icon.setImage(img ); JLabel label = new JLabel(icon); pDraw.add(label); } for(Component component:components) { //retrieve the coordinate System.out.println(component.getBounds()); }

  Read the article

• Basic jUnit Questions

  - by Epitaph

  I was testing a String multiplier class with a multiply() method that takes 2 numbers as inputs (as String) and returns the result number (as String) `public String multiply(String num1, String num2); I have done the implementation and created a test class with the following test cases involving the input String parameter as 1) valid numbers 2) characters 3) special symbol 4) empty string 5) Null value 6) 0 7) Negative number 8) float 9) Boundary values 10) Numbers that are valid but their product is out of range 11) numbers will + sign (+23) 1) I'd like to know if "each and every" assertEquals() should be in it's own test method? Or, can I group similar test cases like testInvalidArguments() to contains all asserts involving invalid characters since ALL of them throw the same NumberFormatException ? 2) If testing an input value like character ("a"), do I need to include test cases for ALL scenarios? "a" as the first argument "a" as the second argument "a" and "b" as the 2 arguments 3) As per my understanding, the benefit of these unit tests is to find out the cases where the input from a user might fail and result in an exception. And, then we can give the user with a meaningful message (asking them to provide valid input) instead of an exception. Is that the correct? And, is it the only benefit? 4) Are the 11 test cases mentioned above sufficient? Did I miss something? Did I overdo? When is enough? 5) Following from the above point, have I successfully tested the multiply() method?

  Read the article

• Should business objects be able to create their own DTOs?

  - by Sam

  Suppose I have the following class: class Camera { public Camera( double exposure, double brightness, double contrast, RegionOfInterest regionOfInterest) { this.exposure = exposure; this.brightness = brightness; this.contrast = contrast; this.regionOfInterest = regionOfInterest; } public void ConfigureAcquisitionFifo(IAcquisitionFifo acquisitionFifo) { // do stuff to the acquisition FIFO } readonly double exposure; readonly double brightness; readonly double contrast; readonly RegionOfInterest regionOfInterest; } ... and a DTO to transport the camera info across a service boundary (WCF), say, for viewing in a WinForms/WPF/Web app: using System.Runtime.Serialization; [DataContract] public class CameraData { [DataMember] public double Exposure { get; set; } [DataMember] public double Brightness { get; set; } [DataMember] public double Contrast { get; set; } [DataMember] public RegionOfInterestData RegionOfInterest { get; set; } } Now I can add a method to Camera to expose its data: class Camera { // blah blah public CameraData ToData() { var regionOfInterestData = regionOfInterest.ToData(); return new CameraData() { Exposure = exposure, Brightness = brightness, Contrast = contrast, RegionOfInterestData = regionOfInterestData }; } } or, I can create a method that requires a special IReporter to be passed in for the Camera to expose its data to. This removes the dependency on the Contracts layer (Camera no longer has to know about CameraData): class Camera { // beep beep I'm a jeep public void ExposeToReporter(IReporter reporter) { reporter.GetCameraInfo(exposure, brightness, contrast, regionOfInterest); } } So which should I do? I prefer the second, but it requires the IReporter to have a CameraData field (which gets changed by GetCameraInfo()), which feels weird. Also, if there is any even better solution, please share with me! I'm still an object-oriented newb.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20  | Next Page >