Search Results

Search found 8999 results on 360 pages for 'core i7'.

Page 140/360 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

  • How do you passthrough native SATA drives to a guest on ESXi?

    - by John
    I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

    Read the article

  • Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

    - by vladeta
    I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

    Read the article

  • Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

    - by j goseeped
    hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

    Read the article

  • Bootable dvd installs ubuntu in one computer but not in other...Why? [closed]

    - by SAM
    Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? I have 2 computers, Windows 7 Intel. On one computer Ubuntu boot-able DVD (AMD 64) works properly. But on other computer the same DVD boots OK but when clicked on "Install Ubuntu" a blank screen with blinking cursor(_) appears and it continues just blinking forever. What problem can be there in computer 2? Can it be DVD reader's problem? (Both computers have LG DVD RW) Can there be any problem in DVD? Computer 1 specs: Pentium D 3 GHz Windows 7 32-bit not a 64bit-capable processor still Ubuntu 64bit trial/installer runs... Computer 2 specs: Core i7 2700k Windows 7 32-bit nvidia gtx 560 graphicsCard ...BIG BOSS... still can't run the setup/trial/disk-check/memory-test ?!?!? Is it the problem of graphics card ?!? I also tried burning other dvd which has the same behavour.... AND yes the dvd name is: ubuntu-12.04.1-dvd-amd64.iso Any help is appreciated.

    Read the article

  • What is the best way to exploit multicores when making multithread games?

    - by Keeper
    Many people suggest to write a program, and then start optimizing it. But I think that when it's coming to multithreading with multicore, a little think ahead is required. I've read about using threads, and experienced it myself during some courses at the university (still a student). The big question is simple, but a bit abstract: What thread related steps in game design do I need to take, before implementation? Now trying to be more specific. Let's say, as an example, that I'm making a small board game (like Monopoly) that I want to be multithreaded. My goal Is that this multithreaded game will exploit the best of the multicore system, lets say 4-6 cores (like in i7 processors). My answer to this question at the moment is, one thread for each of these four basic components: GUI User Input / Output AI (computer rival) Other game related calculations (like shortest path from A to B, or level up status change) I'm not an expert (yet!), and I'm sure there are better answers out there. Any suggestion, answer, different approach will be helpful. Some thoughts: Maybe splitting the main database is a good way.. (or total disaster.. )

    Read the article

  • WoW Severe graphical Corruption on Ubuntu 11.10

    - by Desiderantes
    I get those graphical glitches when running WoW 4.2.0 with wine (Ubuntu 11.10 AMD64), in a Dell XPS 15(L501X), even with ironhide. Anyone can help me? CPU: Intel Core i5-460M 4gb RAM because it's a Dell XPS 15(Optimus Technology), i have 2 graphic cards: An Intel HD 460M integrated graphics card, which driver is i915 A nVidia GeForce GT 420M, ALREADY with propietary drivers Running Ubuntu 11.10 AMD64 with custom XFCE Desktop Wine 1.4 rc6(Emulating winxp) corefonts and vc2005 installed on Wine http://i.imgur.com/FDU6x.jpg

    Read the article

  • Does an LTS desktop get any updates after three years?

    - by Oli
    In cleaning up an answer today, I noted the following: LTS desktops get updates for three years LTS servers get updates for five years An Ubuntu desktop is (essentially) a superset of server packages. So in the fourth and fifth year, if LTS Server gets Kernel updates*, are these also provided for LTS Desktop? What about other core-system stuff? I realise the Kernel is a little special because there is a -server variant but are updates pushed for -generic (et al) too?

    Read the article

  • help with migrating from Widows, x64 FGLRX, CPU load, Java and Minecraft

    - by joxer
    Im new to ubuntu, it is the second time i have installed it. This comp is Dell studio 1558. some specs: CPU- intel core i7 Q720 1.6GHz, GPU- ATI Mobility Radeon HD 5400 FGLRX- i've fallowed these instructions among inspecting many others, i have tried all of the variants mentioned in that tread before reverting back to the drivers supplied with Ubuntu ( through additional drivers ) which apparently seem to work best. i am testing them with minecraft as silly as it may sound. in 2 to 60 minutes the FPS drop from 70+ to somewhere between 0 and 5. while "fgl_glxgears" runs at between 400 and 800 FPS smoothly.. I am using oracle ( sun ) JRE6 to run minecraft, i have gotten it through a tutorial linked on oracle's website, i currently have no other version of java installed ( was worse when i had a few others here ). after closing the game Ubuntu is similarly slow, i've checked the CPU load using System Monitor and it shows one of the CPU's jumping to 80%~100% load at a time.. a reboot solves it. i realize my mess is up to me to solve but a hand is always appreciated. tyvm in advance.

    Read the article

  • HD 6970 Corrupted Video

    - by FailedDev
    considering this rig : i7 2600K 8GB RAM Corsair Vengeance kit 10-9-10-27 @1866 HD 4870 PSU Corsair AX 1200 I recently upgraded to a HD 6970 and I am getting the following - not so nice screens : http://imageshack.us/g/213/1000142z.jpg/ Had anyone any similar trouble at all? I am thinking that the card is DOA but could it also be the Mobo? Since I am in the BIOS I can't think how the mobo could be the problem. HD 4870 works perfect btw regardless of what I throw at it. Any way to prove that the card is OK? Thanks

    Read the article

  • Understanding the Value of a DMOZ Submission

    The Open Directory Project (DMOZ) data powers the core directory services for many of the Internet's most influencial search engines and portals. However, Matt Cutts once said: "if you can't get into Dmoz, I wouldn't necessarily worry about it. There are a lot of other great places to get links across the web."

    Read the article

  • Facebook C# SDK submitted to the Outercurve Foundation

    - by The Official Microsoft IIS Site
    I am pleased to announce another open source milestone as we continue to deliver on our commitment to Interoperability: today, the Facebook C# SDK was submitted to the Outercurve Foundation’s Data, Languages, and Systems Interoperability gallery. This project is a set of libraries that enables developers of all Microsoft platforms, as well as Mono, to build applications that integrate with Facebook. The project contains core libraries for authentication and calling Facebook APIs. Additionally...(read more)

    Read the article

  • How do I copy hyperlink only (and not text) to another cell?

    - by OfficeLackey
    I have a spreadsheet where column A displays names. There are a few hundred names and each has a different hyperlink (which links to that person's web page). I want to transfer those hyperlinks across to a different column which has different text in and no hyperlinks. Not every cell in column A has a hyperlink. There are groups of cells merged together, so A2:A7 has one link, A8:A13 the next, A9:10 the next (i.e. number of cells merged is not uniform). e.g. where A2:A7 reads "Bob" and links to www.bob.com, I want I2:I7, which reads, "Smith," and does not link to anything, to link to www.bob.com. I want to do this repeatedly, copying links from A2:A579 into I2:I579. The information is copied from a table within a web page, and that is where the hyperlinks come from.

    Read the article

  • Live cd and usb install failure blank screen when trying to install on an HP Pavilion dv6

    - by Ajian
    I recently bought a new computer, and have been trying to install linux on it, 11.10 x64. It is a HP pavilion dv6-6117dx. 2.4GHz/1.5GHz VISION A8 Technology from AMD with AMD Quad-Core A8-3500M Accelerated Processor AMD Radeon HD 6620G Discrete-Class Graphics I am pretty sure i picked a unsupported graphics card or something. I have tried booting from usb as well, but the screen becomes blank after rebooting.

    Read the article

  • BSOD after PC has been running for a while

    - by user1389999
    I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

    Read the article

  • My laptop suppose to have 6 GB ram but it's only 2 GB installed

    - by monablo
    My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

    Read the article

  • AMD Athlon II X3 425 On Linux

    <b>Phoronix:</b> "One of AMD's low-priced offerings is the Athlon II X3 425, which is a triple-core AM3 processor that can easily overclock past 3GHz and is priced to sell at around $70 USD."

    Read the article

  • Updating ATI HD 5970 Graphics card - version errors?

    - by user55406
    I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

    Read the article

  • What are the tradeoffs involved in referencing Context in a library?

    - by C. Ross
    Context is one of the core classes of Android, and many functions it contains are useful in Android library projects, particularly accessing configuration. What are the trade offs involved in accessing the Context in a library, either by injection or by subclassing Application in the library, and subclassing that in the application. Does this make the application brittle or introduce inappropriate coupling?

    Read the article

  • APress Deal of the Day 24/Oct/2013 - CSS3 Solutions

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/24/apress-deal-of-the-day-24oct2013---css3-solutions.aspxToday's $10 deal of the day from APress at http://www.apress.com/9781430243359 is CSS3 Solutions "CSS3 contains a broad set of new additions and changes to the core CSS language across a range of modules, which means lots of new things to learn, and lots of new things that can go wrong. This book provides solutions to all of the most common CSS3 problems."

    Read the article

  • NVIDIA Driver Crashing on Custom-Built Windows 7 PC

    - by srunni
    I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

    Read the article

  • vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

    - by Ikalou
    I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

    Read the article

  • Booting Ubuntu 12.04 from external eSATA disk

    - by Lord of Scripts
    This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

    Read the article

  • Installing ubuntu 12.04 on macbook pro9,2

    - by stariz77
    I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

    Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >