Search Results

Search found 4489 results on 180 pages for 'logging'.

Page 141/180 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Computer slow after installing 32GB RAM

  - by John Gilmore

  I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

  Read the article

• certificate SSH login does not work on 22 but other port

  - by Hugo

  On my Red Hat server, the sshd will not accept my correct certificate login. However, If i start another sshd on another port, it works! (I assume the second sshd loads the same configruation files.) second sshd started with: sudo /usr/sbin/sshd -p 54321 -d #-d is optional and prints debug output ssh strange-host -p 22 -vvv prints: debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering public key: /home/me/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 528 bytes for a total of 2389 debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug2: we did not send a packet, disable method debug3: authmethod_lookup password ssh strange-host -p 54321 -vvv prints: debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering public key: /home/me/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 528 bytes for a total of 2389 debug1: Server accepts key: pkalg ssh-dss blen 433 debug2: input_userauth_pk_ok: SHA1 fp 0f:1c:df:27:f7:86:49:a8:47:7e:7f:f3:32:1c:7d:04:a3:73:a5:72 So the question is why the difference? I have thought of no way to get any helpful logging from the "standard" sshd to troubleshoot the problem.

  Read the article

• NTbackup doesn't complete on system state

  - by Joe Majsterski

  I have a Windows 2003 server that is running a semi-custom backup task. The scheduled task calls NTbackup with a few switches depending on whether it is a full or incremental backup. Most of the time, the NTbackup completes fine, and the wrapper then appends the NTbackup log into its own log before adding a few final comments and completing. The problem I am having is that sometimes, NTbackup seems to just... blank out. It always completes backup of the C: and E: drives, but then it will start the system state and not add any more messages into the event log saying it completed that. And the NTbackup log is left empty, since it doesn't write anything to the log until all the backup tasks are complete. This is causing the wrapper to append no text into its own log. That causes problems for us because we read the information out of that log to determine whether backups are failing. The wrapper task also reports that it is completing normally in the event log. Anyone ever seen a case where system state doesn't complete consistently? To be clear, the server is not logging any error messages anywhere. It's just not seeming to complete or log anything.

  Read the article

• User receives group membership error to terminal server even though has rights

  - by BlueToast

  http://www.hlrse.net/Qwerty/TSLoginMembership.png To log on to this remote computer, you must be granted the Allow log on through Terminal Services right. By default, members of the Remote Desktop Users group have this right. If you are not a member of the Remote Desktop Users group or another group that has this right, or if the Remote Desktop User group does not have this right, you must be granted this right manually. Only as of today a particular user began receiving this message for a second terminal server they use; otherwise, they have never had any problems authenticating into this server. We have no restrictions on simultaneous and multiple logins. On each terminal server, we have a group and security group like "_Users" locally in the Builtin\Remote Desktop Users group. For this particular user, on this particular terminal server we have locally given him Administrator, Remote Desktop Users, and Users membership; in AD we have given him DOMAIN\Administrator, Builtin\Remote Desktop Users, DOMAIN\_Users. It still gives us that error message. We gave him membership to another terminal server (random) by simply making him member of another DOMAIN\_Users group -- successfully able to login to that random terminal server. So, from scratch we created an AD account 'dummy' (username) with only Domain Users membership. Tried to login to this particular server, no success. So I added 'dummy' to DOMAIN\_Users group, and then was successfully able to login. Other users from this user's department are able to login to this particular server just fine as well. We checked the Security logs on this particular server, and while it is logging everything, the only thing it appears to not log are these failed login attempts from this particular user who receives this error message. We have tried rebooting the server, and the user is still receiving that error message.

  Read the article

• How would I write a terminal command to download a folder with wget from a Media Temple (gs) server?

  - by racl101

  I'm trying to download a folder using wget on the Terminal (I'm usin a Mac if that matters) because my ftp client sucks and keeps timing out. It doesn't stay connected for long. So I was wondering if I could use wget to connect via ftp protocol to the server to download the directory in question. I have searched around in the internet for this and have attempted to write the command but it keeps failing. So assuming the following: ftp username is: [email protected] ftp host is: ftp.s12345.gridserver.com ftp password is: somepassword I have tried to write the command in the following ways: wget -r ftp://[email protected]:[email protected]/path/to/desired/folder/ wget -r ftp://serveradmin:[email protected]/path/to/desired/folder/ When I try the first way I get this error: Bad port number. When I try the second way I get a little further but I get this error: Resolving s12345.gridserver.com... 71.46.226.79 Connecting to s12345.gridserver.com|71.46.226.79|:21... connected. Logging in as serveradmin ... Login incorrect. What could I be doing wrong?

  Read the article

• Zabbix doesn't update value from file neither with log[] nor with vfs.file.regexp[] item

  - by tymik

  I am using Zabbix 2.2. I have a very specific environment, where I have to generate desired data to file via script, then upload that file to ftp from host and download it to Zabbix server from ftp. After file is downloaded, I check it with log[] and vfs.file.regexp[] items. I use these items as below: log[/path/to/file.txt,"C.*\s([0-9]+\.[0-9])$",Windows-1250,,"all",\1] vfs.file.regexp[/path/to/file.txt,"C.*\s([0-9]+\.[0-9])$",Windows-1250,,,\1] The line I am parsing looks like below: C: 8195Mb 5879Mb 2316Mb 28.2 The value I want to extract is 28.2 at the end of file. The problem I am currently trying to solve is that when I update the file (upload from host to ftp, then download from ftp to Zabbix server), the value does not update. I was trying only log[] at start, but I suspect, that log[] treat the file as real log file and doesn't check the same lines (althought, following the documentation, it should with "all" value), so I added vfs.file.regexp[] item too. The log[] has received a value in past, but it doesn't update. The vfs.file.regexp[] hasn't received any value so far. file.txt has got reuploaded and redownloaded several times and situation doesn't change. It seems that log[] reads only new lines in the file, it doesn't check lines already caught if there are any changes. The zabbix_agentd.log file doesn't report any problem with access to file, nor with regexp construction (it did report "unsupported" for log[] key, when I had something set up wrong). I use debug logging level for agent - I haven't found any interesting info about that problem. I have no idea what I might be doing wrong or what I do not know about how Zabbix is performing these checks. I see 2 solutions for that: adding more lines to the file instead of making new one or making new files and check them with logrt[], but those doesn't satisfy my desires. Any help is greatly appreciated. Of course I will provide additional information, if requested - for now I don't know what else might be useful.

  Read the article

• Windows 7 doesn't start anymore

  - by 0xFF

  I've experienced some BSOD on windows 7 RC, and some freezing when startup, but today was big surprise, it doesn't start anymore. I tried to start on safe mode and no results too, it shows the starting animation, then a blue screen for less than a second and turns off immediately. The only thing I remember did today is update flash player under Firefox, then chrome stopped working even after logging off, and once restarting, it doesn't start anymore. Anyone experienced the same issue? any hints? [EDIT 3] Solved : Windows 7 have a very smart repair strategy, it works automatically, and it tried every possible fix, what fixed my problem was the system restore to a previous date, all this happened automatically. [EDIT2] these are the last lines in the ntbtlog.txt file Did not load driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys Loaded driver \SystemRoot\system32\DRIVERS\VSTAZL3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTDPV3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTCNXT3.SYS Loaded driver \SystemRoot\system32\drivers\modem.sys Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys Loaded driver \SystemRoot\System32\Drivers\usbvideo.sys [edit] this is the BSOD I get : http://twitpic.com/i87cx Thank you.

  Read the article

• Repair Windows 2008 boot

  - by aksamit

  I have been caught in a loop where I can't boot up Windows Server 2008. When the OS starts to boot I am presented two options: Launch Startup Repair (recommended) Start Windows Normally No matter what option is chosen I end up with a black screen stating "Windows is loading files..." which takes approx 15 minutes until "System Recovery" is started. I try to run the "Startup Repair" but it reports the following error: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Actually no matter what other options I would try in the System Recovery they would also report some kind of error. Some other logging I have been able to extract: Diagnosis and repair details: Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding. So it is actually stating that Harddisk could not be found... which to me seems to be a bit contradictious since the System Recovery just loaded all files from the hard disk it now states it cannot find. Any ideas on what other options I have?

  Read the article

• Why is REMOTE_ADDR only sometimes available as an Apache environment variable?

  - by Xiong Chiamiov

  To avoid having to parse X-Forwarded-For in Varnish, I'm trying to just set a header on the SSL terminator (currently Apache) that stores the direct client IP in a header. On our development machine, this works: RequestHeader set X-Foo %{REMOTE_ADDR}e However, in staging it doesn't. Specifically, the header is empty, as illustrated by both varnishlog: 13 TxHeader b X-Foo: (null) (On the development machine, this shows the IP address as expected.) Similarly, logging REMOTE_ADDR shows that it only appears to be populated on the dev machine: # Config LogFormat "%{X-Forwarded-For}i %{REMOTE_ADDR}e" combined CustomLog "/var/log/httpd/access_log" combined # Log file, staging <my ip> - # Log file, development <my ip> <my ip> Since the dev machine is, well, a dev machine, it is different in a number of ways; however, I can't track down which difference is causing this. The versions of Apache are the same (2.2.22), and I don't see anything relevant in any of the standard config files or /etc/sysconfig/httpd. And the rest of the system is reasonably similar, since they're built off the same CentOS 5 base image. I can't even tell from the Apache documentation whether REMOTE_ADDR is expected to exist or not as an environment variable, but it clearly works on one machine, whether by fluke or design, and the inconsistency is driving me mad.

  Read the article

• (Windows 7) Shared External Drive Permission Issues

  - by connec

  So, say I share my system (C) drive through windows (E.g. properties -> Sharing -> Advanced Sharing -> Share this Folder). I can then access this drive at \\Comp\C on another networked computer - all is well. However, if I insert a removable (USB) disk, say "E", and proceed to share it the same way, when I attempt to access \\Comp\E (either directly or through browsing) I get an error: Windows cannot access \\Comp\E You do not have permission to access \\Comp\E. Contact your network administrator to request access. Now, the permissions (Advanced Sharing -> Permissions) are set with "Everyone" having read access (same as the internal drive), so this doesn't make a lot of sense. Also of note, I have an SSH server on my computer (through Cygwin) and even through SSH (logging in as an administrator user) I cannot access /cygdrive/e (although /cygdrive/c is accessible). As a final note, the drive is of course accessible on the host machine (E:\), and also at \\Comp\E on the host machine.

  Read the article

• Wordpress on Apache is redirecting all https to http

  - by Krist van Besien

  I have a problem with a wordpress site on a server I admin. I don't know anything about wordpress however. My problem is that we want the site to be accessed over https, bot somehow all requests to https:// URLs are answered by the server with a 302, redirecting to http. The wordpress site itself is configured to use https, and we see that in the pages that are generated the links are all https links. In the apache config there are no rewrite rules and no redirects. However, any request to a https:// URL is answered with a redirect to the equivalent http URL. And I really would like to know where these redirects are coming from, what is generating these redirects. I've increased the loglevel on the webserver to DEBUG, but did not get any info there. I tried to enable debug logging in wordpress per the recipy I found here: http://codex.wordpress.org/Debugging_in_WordPress But did not get a debug.log file in the directory where one should appear. I'm really at a loss here, and need to fix this urgently. Any hints as where to start looking? Apache is 2.2.14 on Ubuntu. There are several other virtual hosts on this server, using php and https without any problem... Edit: I created a small info.php script and dropped that in the webservers' root. Calling this yields the output of the script, no redirect is generated. This suggest that it's not the webserver, but wordpress that is doing it. A second thing I noticed is that the redirect comes with several cookies, one of which has "httponly" set. Could that be it?

  Read the article

• What to do after a fresh Linux install in a production server?

  - by Rhyuk

  I havent had previous experience with the 'serious' IT scene. At work I've been handed a server that will host an application and MYSQL (I will install and configure everything), this will be a productive server. Soon I will be installing RHEL5 to it but I would like to know like, if you get a new production server, what would be the first 5 things you would do after you do a fresh Linux install? (configuration/security/reliability wise) EDIT: Added more information regarding the server enviroment and server roles: -The server will be inside my company's intranet/firewall. -The server will receive files (GBs) in binary code from another internal server. The application installed in this server is in charge of "translating" all that binary into human readable input. Server will get queried to get this information. -Only 2-3(max) users will be logging in. -(2) 145GB HDs in RAID1 for the OS and (2) 600GB HDs in RAID1 also for data. I mean, I know I may not get the perfect guideline. But at least something thats better than leaving everything on default.

  Read the article

• MSMQ on Win2008 R2 won't receive messages from older clients

  - by Graffen

  I'm battling a really weird problem here. I have a Windows 2008 R2 server with Message Queueing installed. On another machine, running Windows 2003 is a service that is set up to send messages to a public queue on the 2008 server. However, messages never show up on the server. I've written a small console app that just sends a "Hello World" message to a test queue on the 2008 machine. Running this app on XP or 2003 results in absolutely nothing. However, when I try running the app on my Windows 7 machine, a message is delivered just fine. I've been through all sorts of security settings, disabled firewalls on all machines etc. The event log shows nothing of interest, and no exceptions are being thrown on the clients. Running a packet sniffer (WireShark) on the server reveals only a little. When trying to send a message from XP or 2003 I only see an ICMP error "Port Unreachable" on port 3527 (which I gather is an MQPing packet?). After that, silence. Wireshark shows a nice little stream of packets when I try from my Win7 client (as expected - messages get delivered just fine from Win7). I've enabled MSMQ End2End logging on the server, but only entries from the messages sent from my Win7 machine are appearing in the log. So somehow it seems that messages are being dropped silently somewhere along the route from XP or 2003 to my 2008 server. Does anyone have any clues as to what might be causing this mysterious behaviour? -- Jesper

  Read the article

• Permissions Issue with Files Generated by PerfMon

  - by SvrGuy

  We are trying to implement some data logging to CSV files using a Data Collector Set in PerfMon (on a windows Server 2008R2 system). The issue we are running into is that we (seemingly) can't control the permissions being set on the log files created by perfmon. What we want is for the log files created by perfmon to have Everyone:F permissions (Full Control for Everyone). So, we have a directory structure setup where all logs go into a folder: c:\vms\PerfMonLogs\%MACHINENAME% (e.g. c:\vms\PerfMonLogs\EvaluationG2) In the above example, c:\vms\PerfMonLogs\EvaluationG2 has permissions Everyone:F (below is the icacls for this directory) EVALUATIONG2/ Everyone:(OI)(CI)(F) NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Performance Log Users:(OI)(R) When the data collector set runs, it creates new sub folders and files within c:\vms\PerfMonLogs\EvaluationG2, e.g. (C:\vms\PerfMonLogs\EVALUATIONG2\M11d26y2012N3) Each of these directories and files has the following permissions: M11d26y2012N3 NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Performance Log Users:(OI)(R) So these new folders and not simply inheriting permissions from the parent folder (don't know why). Now, we tried adding Everyone:F using the security tab on the collector set (No dice). Any ideas? How do we control the permissions on the log files generated by perfmon data collector set?

  Read the article

• Revamping an old and unstable office IT-solution using Windows Server and OpenVPN

  - by cmbrnt

  I've been given the cumbersome task to totally redo the IT-infrastructure for a customer's office. They are currently running Windows XP all over, with one computer acting as a file server with no control over which users have access to which files, and so on. To top it off, this file server also functions as a workstation, which means it gets rebooted every time the user notices some sluggish behavior or experiences problems with flash games. To say the least, this isn't working for them. Now - I've got a very slim budget, but I need to set up a new server, and I wish to run Windows Server 2008 on it. I also need the ability to access the network remotely via VPN. Would it be a good idea to install VMware ESXi 4.1 onto the new server, and then run Windows Server 2008 as well as a separate Debian install for openvpn on it? I don't like the Domain Controller for the future AD to also run a VPN-server, because of stability issues when something goes to hell with either of them. There will be no redundancy though. However, I'm not sure if there is something to gain by installing a VPN solution on the Windows Server itself, when it comes to accessing file shares on the network via VPN. I don't know how to enable users logging in via the VPN to access the remote files, since they will be accessing the network from their own home computers (which is indeed a really bad idea, but this is what I've got to work with). They won't be logged in to the windows Domain, but rather their home workgroups. I need to be able to grant access to files in certain directories based on the logged in AD-user, but every computer won't necessarily be configured to log into the domain. I'm not sure how to explain this in a good way, but I'd be happy to clarify if somethings not clear. Any help would be great, because I've got a feeling that I can't do this without introducing a bunch of costly new rules when it comes to their IT-solution. I'd rather leave that untouched and go on my merry way to the next assignment.

  Read the article

• Outlook 2010 IMAP account - send on behalf

  - by Master of Celebration

  So I was looking for a possibility to manage the mail distribution of online shops, newsfeeds, etc. and have a nice solution via distribution groups aka. alias addresses. In example, I register an account on eBay using "[email protected]" (where org.com is my company obviously). That address is an alias and can be managed on my on-premise mail server setting destination to somebody's mailbox independent from logging on to eBay - in case somebody else shall do the eBay-stuff, I can quick change the destination of that alias :-) So far, so good - and now to the problem: Using Microsoft Outlook 2010 and an IMAP account on our mail server, I cannot figure out how to remove that "on behalf of"-string visible in the from-field when sending a message under that [email protected] address. That's quite a pity, because especially eBay doesn't accept/forward mails not coming from the registered address.. Using other mail clients (e.g. Mozilla Thunderbird), the problem does not occur so I guess it's Outlook specific. I cannot "grant" permission to "send as", because that address is not a mailbox, but rather an alias only. Furthermore, the mail accounts are not Exchange, but IMAP! Does anybody have any other ideas to "remove" that annoying string? Consideration: We have to use Microsoft Outlook for some reason! :-)

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• Error getting PAM / Linux integrated with Active Directory

  - by topper

  I'm trying to add a Linux server to a network which is controlled by AD. The aim is that users of the server will be able to authenticate against the AD domain. I have Kerberos working, but NSS / PAM are more problematic. I'm trying to debug with a simple command such as the following, please see the error. Can anyone assist me to debug? root@antonyg04:~# ldapsearch -H ldap://raadc04.corp.MUNGED.com/ -x -D "cn=MUNGED,ou=Users,dc=corp,dc=MUNGED,dc=com" -W uid=MUNGED Enter LDAP Password: ldap_bind: Invalid credentials (49) additional info: 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece I have had to munge some details, but I can tell you that cn=MUNGED is my username for logging into the AD domain, and the password that I typed was the password for said domain. I don't know why it says "Invalid credentials", and the rest of the error is so cryptic, I have no idea. Is my approach somehow flawed? Is my DN obviously wrong? How can I confirm the correct DN? There was a tool online but I can't find it. NB I have no access to the AD Server for administration or configuration.

  Read the article

• Giving the root user priority to maintain Debian (while server collapsing under heavy load)

  - by Saix

  Is there any way to setup Debian to prioritize any or specific root's activity before every other? For instance, several times per year something gets wrong (usually man's fault by overstressing apache/mysql) and system gets unresponsive under heavy load like 200 (8-core cpu). I know there are limits for php scripts to run then kill, but that's not the way because this limit has to be at least 45 minutes long. The problem is, until I'm able to login via SSH and let apache/mysql restart under this server stress, it nearly hits these 45 minutes anyway. Also hardware restart causing usually to run fsck at boot time on all harddrives since it's usually pretty long the box haven't been restarted. I was told it's really not good idea disabling fsck but then again, it takes more then hour to complete. What is the fastest way to restart apache/mysql? Is there any way to give ssh users or root user higher priority so the logging in and completing these restarts (rather stops though) commands wouldn't take so long? One comes to my mind.. use NICE for apache/mysql but no way. I can't risk limiting those two vital apps 24/7 or could I? I'm a little bit scared if any other system process wouldn't slow the pages down too much. Any backup process, swap (if any) etc. There is pretty heavy PHP framework with 20k visits a day, so it needs every hw/sw resource available. I can't throttle it the whole time, just in certain points when system gets unresponsive, so I could maintain it.

  Read the article

• Hiding my location to websites with region-specific languages/content

  - by Tudor

  I just went to download Microsoft Secority Essentials and it enraged me as it redirected me to a site in my home language and not the default English. If I go to America, I don't want them to speak Swahili. It reminded me of all the other websites who try to do the same. I don't want my content in greek when I'm on vacation! I for one simply can't work on a computer unless the language is English (or unless there's a VERY good reason to change the language). Location aware content is only good for download mirrors, and even then I would rather pick from a list of countries myself. (or if you can't speak anything but your own language) I know websites get your location from your IP and ISP, but is there any way you can inhibit this behaviour on a browser level? Is there any Chrome/Firefox extension for it? Do I really have no choice but to hide my IP? There's all sorts of services that claim they're hiding your IP for free so that people can't log and trace your steps through the internet, but they're probably logging it themselves and making money off it. Why else would they be free? I've found that Firefox has an Option that says "Choose your preferred language when displaying pages". Haven't found anything for Chrome.

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• Our clients site is redirecting to a pill scammy site [closed]

  - by Alex Demchak

  Possible Duplicate: My server's been hacked EMERGENCY We've usually host our clients site, but we aren't hosting this one. The website itself (weddle-funeral.com) works just fine. if you load google and search for weddle funeral stayton oregon - and click that link, the site links to a scammy pill site. I went through the site and there were some php files in the wordpress plugins that got quarantined by my antivirus. I removed ALL non essential files, and uploaded fresh versions of all the plugins, but it's STILL redirecting from google. I tried logging in to the cpanel (on a virtual private server), and the cpanel flashed a red warning screen The site's security certificate is not trusted! You attempted to reach XXXXX.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site. (Keep in mind, that's for the HOSTING accounts CPanel) Is there something in the SERVER probably that's causing the redirect? EDIT: .htaccess file contents # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress

  Read the article

• Unable to connect to SQL Database (can the password be reset)

  - by user45450

  I have recently joined a company which has an SQL 2005 Server running a few databases. The server looks like no one has touched it in a couple of years and has this week it ran out of disk space. After a quick hard drive scan it looks like some of the databases have become a little bloated and particularly the Sharepoint_config~*~_log and WSS_Content_log.ldf have grown to about 15GB. I have been able to log into a couple of the other databases and use the shrinkfile command to free up disk space but for some reason I am unable to log into the sharepoint and Microsoft#SSEE databases (which gives me the "cannot connect to Sharepoint, a network related or instance specific error occurred..." when I try and connect) I can see that the database is running via the SQL surface configuration and I have made sure that the remote connection settings allow me to connect locally but I am still unable to log in either with windows authentication or locally. Is there any way to reset or recover the database login details so I can get in? ( I have tried logging in with all the administrative passwords I can find and after tracking down the company who installed it in the first place I found out that they have no idea what the password could have been)

  Read the article

• Lost user account for Windows Vista

  - by annelie

  Hello, I'm trying to help a friend who's lost her user account in Vista. I know there's supposed to be a way you can boot the computer from the vista installation disc and create an admin account you can later login with, but her installation disc is in Australia and her laptop in London. Is there any other way to get in? Or would it be better to try and access just the harddrive? She's mainly concerned with getting all her data off it. As for how she lost the account, I'll let her explain in her words. :) My computer basically got some virus and now is up sh*t creek. it told me i had this cryptic thingy majiggy was missing and then this fake virus told me i needed to scan my computer. SO i tried to do malware thing but it kept shutting my computer down. ANYWAY...now its it will only open up with 'launch startup repair' and has got rid of my settings for logging in and wants me to be 'other user' which i have no password or username for'...so basically im stuffed. This is Windows Vista by the way. Thanks, Annelie

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >