Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 142/956 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

  - by Scott

  Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

  Read the article

• Unable to make the session state request to the session state server.

  - by Angry_IT_Guru

  For about 4-5 months now, I seem to be having this sporadic issue--mainly during our busiest time of the day between 10:30-11:45AM, where all my Windows 2003 web servers in a Microsoft NLB cluster start throwing session state server errors. A sample error is below. System.Web.HttpException: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aspnet_state\Parameters\AllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name. at System.Web.SessionState.OutOfProcSessionStateStore.MakeRequest(StateProtocolVerb verb, String id, StateProtocolExclusive exclusiveAccess, Int32 extraFlags, Int32 timeout, Int32 lockCookie, Byte[] buf, Int32 cb, Int32 networkTimeout, SessionNDMakeRequestResults& results) at System.Web.SessionState.OutOfProcSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem) at System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Now I'm using ASP.NET State service on a centralized back-end Windows 2003 server that all servers communicate to. I was originally using SQL Server state for a couple years as well prior to having this issue. The problem with SQL wqas that when the issue occurred, it created a blocking situation which essentially impacted all users across all servers. The product company recommended that I use the standard ASP.NET State service as that was what they technically supported. Why this would make a difference is beyond me -- but I had no choice but to try it! I have attempted to create multiple application pools, adding additional servers, chaning TCP/IP timeout from 20 to 30 seconds, and even calling Microsoft ASP.NET product support, with very little success. I even recommended that they review whether they are using read-only session state instead of read/write per page request -- as I understand that this basically causes every page to make round-trips to state server even if state isn't being used on the page. Unfortunately, the application is developed by our product company and they insist that it is something with my environment because other clients do not have these sort of issues. However, I've talked to other clients and they tell me when they've seen issues like they, they've basically had to create another web farm. This issue almost seems like I've simply reached some architectural limit within the application... Microsoft's position on the issue is that the session state needs to be reduced and the returncode being reported back from the state server indicates buffers are full. To better understand the scope of issues (rather than wait for customers to call and complain), I installed ELMAH and configured it to send me e-mails when unhandled exceptions occur. I basically get 500-1000 e-mails during the time period of high activity! If any one has any other ideas I could try or better ways to troubleshoot, I'd appreciate it.

  Read the article

• MS Ajax Libraries and Configured Assemblies

  - by smehaffie

  Use Case You have a brand new IIS servers that has .Net 3.5 installed and are migrating sites to the new servers.  In the process of migrating sites you come across some sites that get an error about the version of AJAX libraries being references in the web.config.  In the web.config all the entries reference 1.0.61025.0, but the older version of the AJAX libraries are not installed on the new servers, only the latest version is installed that comes with .Net 3.5.  So what are the options to fix this issue. Solutions 1) Install the older version of the AJAX Libraries: Although this works, IMO it is never a great idea to install an older version of a library after a newer version has been installed.  Plus, if all new application use the latest versions, is it worth the effort of installing the older version for a few legacy applications? 2) Update the web.config files so all references use latest version (3.5.0.0):  This option is very time consuming and error prone. In addition, you will also have to update any pages where there is a register tag for the older libraries as well.  This would require you to redeploy any application that have this issue. 3) Use the Configured Assembly capabilities of .Net (aka: Assembly Bindings) to make any application that uses the older AJAX libraries to use the new AJAX libraries.  IMO, this is the easiest, quickest and least invasive way to fix the issue.  Below are the steps to implement this fix. Solution #3 Do the following steps on the IIS servers that the issue is occurring.  The 2 assemblies that need assemblies bindings created are: System.Web.Extension & System.Web.Extensions.Design 1) Go to Start - > All Program -> Administrative Tools -> Microsoft .NET Framework 2.0 Configuration. 2) Right click on "Configured Assemblies" to view list of configured assemblies. 3) Left Click on right pane to bring up menu and choose "Add". 4) Make sure "Choose and assembly from the assembly cache is checked" and click the "Choose Assembly" button. 5) Choose System.Web.Extension (does not matter what version). 6) Click the "Finish" button. 7) Binding Policy Tab      - Enter Requested Version = 1.0.61025.0      - Enter New Version = 3.5.0.0 8) Repeat steps 2-7 for the System.Web.Extensions.Design assembly. --------------------------------------------------------------------------------------------------------------------------------------------------------- Note: If "Microsoft .NET Framework 2.0 Configuration does not exist under Admin tools use mmc to access it (see below) 1) Start -> Run -> Enter MMC 2) File - > Add/Remove Snap-In then Click "Add" button 3) Choose ".Net 2.0 Configuration" then click "Add" button and then the "Close" Button. 4) On "Add/Remove Snapin" windows click the "OK" Button. 5) Expand the tree on the right and you can start following the directions above for adding the configured assemblies. ---------------------------------------------------------------------------------------------------------------------------------------------------------

  Read the article

• Some VS 2010 RC Updates (including patches for Intellisense and Web Designer fixes)

  - by ScottGu

  [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] We are continuing to make progress on shipping Visual Studio 2010.  I’d like to say a big thank you to everyone who has downloaded and tried out the VS 2010 Release Candidate, and especially to those who have sent us feedback or reported issues with it. This data has been invaluable in helping us find and fix remaining bugs before we ship the final release. Last month I blogged about a patch we released for the VS 2010 RC that fixed a bad intellisense crash issue.  This past week we released two additional patches that you can download and apply to the VS 2010 RC to immediately fix two other common issues we’ve seen people run into: Patch that fixes crashes with Tooltip invocation and when hovering over identifiers The Visual Studio team recently released a second patch that fixes some crashes we’ve seen when tooltips are displayed – most commonly when hovering over an identifier to view a QuickInfo tooltip. You can learn more about this issue from this blog post, and download and apply the patch here. Patch that fixes issues with the Web Forms designer not correctly adding controls to the auto-generated designer files The Visual Web Developer team recently released a patch that fixes issues where web controls are not correctly added to the .designer.cs file associated with the .aspx file – which means they can’t be programmed against in the code-behind file.  This issue is most commonly described as “controls are not being recognized in the code-behind” or “editing existing .aspx files regenerates the .aspx.designer.(vb or cs) file and controls are now missing” or “I can’t embed controls within the Ajax Control Toolkit TabContainer or the <asp:createuserwizard> control”. You can learn more about the issue here, and download the patch that fixes it here. Common Cause of Intellisense and IDE sluggishness on Windows XP, Vista, Win Server 2003/2008 systems Over the last few months we’ve occasionally seen reports of people seeing tremendous slowness when typing and using intellisense within VS 2010 despite running on decent machines.  It took us awhile to track down the cause – but we have found that the common culprit seems to be that these machines don’t have the latest versions of the UIA (Windows Automation) component installed. UIA 3 ships with Windows 7, and is a recommended Windows Update patch on XP and Vista (which is why we didn’t see the problem in our tests – since our machines are patched with all recommended updates).  Many systems (especially on XP) don’t automatically install recommended updates, though, and are running with older versions of UIA. This can cause significant performance slow-downs within the VS 2010 editor when large lists are displayed (for example: with intellisense). If you are running on Windows XP, Vista, or Windows Server 2003 or 2008 and are seeing any performance issues with the editor or IDE, please install the free UIA 3 update that can be downloaded from this page.  If you scroll down the page you’ll find direct links to versions for each OS. Note that we are making improvements to the final release of VS 2010 so that we don’t have big perf issues when UIA 3 isn’t installed – and we are also adding a message within the IDE that will warn you if you don’t have UIA 3 installed and accessibility is activated. Improved Text Rendering with WPF 4 and VS 2010 We recently made some nice changes to WPF 4 which improve the text clarity and text crispness over what was in the VS 2010/.NET 4 Release Candidate.  In particular these changes improve scenarios where you have a dark background with light text. You can learn more about these improvements in this WPF Team blog post.  These changes will be in the final release of VS 2010 and .NET 4. Hope this helps, Scott

  Read the article

• Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

  - by downbeat

  I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

  Read the article

• Silverlight Cream for December 16, 2010 -- #1011

  - by Dave Campbell

  In this Issue: John Papa, Tim Heuer, Jeff Blankenburg(-2-, -3-), Jesse Liberty, Jay Kimble, Wei-Meng Lee, Paul Sheriff, Mike Snow(-2-, -3-), Samuel Jack, James Ashley, and Peter Kuhn. Above the Fold: Silverlight: "Animation Texture Creator" Peter Kuhn WP7: "dows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger" Jesse Liberty Shoutouts: Awesome blog post by Jesse Liberty about writing in general: Ten Requirements For Tutorials, Videos, Demos and White Papers That Don’t Suck From SilverlightCream.com: 1000 Silverlight Cream Posts and Counting! John Papa has Silverlight TV number 55 up and it's an inverview he did with me the day before the Firestarter in December... thanks John... great job in making me not look stooopid :) Silverlight service release today - 4.0.51204 Tim Heuer announced a service release of Silverlight ... check out his blog for the updates and near the bottom is a link to the developer runtime. What I Learned In WP7 – Issue #3 Jeff Blankenburg has been pushing out tips ... number 3 consisted of 3 good pieces of info for WP7 devs including more info about fonts and a good site for free audio files What I Learned In WP7 – Issue #4 In number 4, Jeff Blankenburg talks about where to get some nice free WP7 icons, and a link to a cool article on getting all sorts of device info What I Learned In WP7 – Issue #5 Number 5 finds Jeff Blankenburg giving up the XAP for a CodeMash sessiondata app... or wait for it to appear in the Marketplace next week. Windows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger Wow... Jesse Liberty is up to number 13 in his Windows Phone from scratch series... this time it's part 2 of his Custom Behaviors post, and ActionTriggers specifically. Solving the Storage Problem in WP7 (for CF Developers) Jay Kimble has released his WP7 dropbox client to the wild ... this is cool for loading files at run-time... opens up some ideas for me at least. Building Location Service Apps in Windows Phone 7 Wei-Meng Lee has a big informative post on location services in WP7... getting a Bing Maps API key, getting the data, navigating and manipulating the map, adding pushpins... good stuff Using Xml Files on Windows Phone Paul Sheriff is discussing XML files as a database for your WP7 apps via LINQ to XML. Sample code included. ABC–Win7 App Mike Snow has been busy with Tips of the Day ... he published a children's app for tracing their ABC's and discusses some of the code bits involved. Win7 Mobile Application Bar – AG_E_PARSER_BAD_PROPERTY_VALUE Mike Snow's next post is about the infamous AG_E_PARSER_BAD_PROPERTY_VALUE error or worse in WP7 ... how he got it, and how he fixed it... could save you some hair... Forward Navigation on the Windows Phone Mike Snow's latest post is about forward navigation on the WP7 ... oh wait... there isn't any... check out the post. Day 2 of my “3 days to Build a Windows Phone 7 Game” challenge Samuel Jack details about 9 hours in day 2 of his quest to build an XNA app for WP7 from a cold start. Windows Phone 7 Side Loading James Ashley has a really complete write-up on side-loading apps onto your WP7 device. Don't get excited... this isn't a hack... this is instructions for side-loading using the Microsoft-approved methos, which means a registered device. Animation Texture Creator Remember Peter Kuhn's post the other day about an Animation Texture Creator? ... well today he has some added tweaks and the source code! ... thanks Peter! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Silverlight Cream for January 12, 2011 -- #1025

  - by Dave Campbell

  In this Issue: Amyo Kabir, Rob Eisenberg, Doug Rathbone, John Papa, Jeff Blankenburg(-2-), Mike Taulty, Peter Kuhn, Laurent Bugnion, Vangos Pterneas, and Senthil Kumar. Above the Fold: Silverlight: "Silverlight Popup sample" Amyo Kabir WP7: "Navigation in a #WP7 application with MVVM Light" Laurent Bugnion XNA: "XNA for Silverlight developers: Part 0 - Why should I care?" Peter Kuhn Shoutouts: Mohamed Mosallem posted a video of an Expression Blend demo he gave recently: Expression Blend Demo Rob Eisenberg posted the winners of the Caliburn.Micro Contest he was running .. and a nice bunch of swag too! Announcing the Caliburn.Micro Contest Winners! Dan Moyer is a LightSwitch enthusiast and writes Why I Believe Visual Studio LightSwitch will be a Win... good well-thought-out and written take on Lightswitch. From SilverlightCream.com: Silverlight Popup sample Amyo Kabir has a post up that is short on description but long on demo and the code is available... put this in the 'a picture is worth 1,000 words category' :) Caliburn.Micro Soup to Nuts Part 7 - All About Conventions The 7th episode of Rob Eisenberg's tutorial series on Caliburn.Micro is up. This episode about some of the conventions that you get out-of-the-box with Caliburn.Micro, what it'll do for you, and how you can modify the behavior of the convention to suit your own taste/style. Two little tips for working with Silverlight chart DateTime Axes Doug Rathbone has been working with the Toolkit Charts for WP7 and finding it difficult to get the info he needs, and now that he's worked it out... he's sharing... particularly information about DateTimeAxis. Silverlight TV 56: WCF RIA Services and Azure The first Silverlight TV of 2011 was John Papa discussing WCF RIA Services and Azure with Saurabh Plant. What I Learned In WP7 – Issue 14 As usual, Jeff Blankenburg is a couple ahead of me... his Issue 14 is about some panorama trickery... like navigating to a specific place in one, or preventing wrapping. What I Learned In WP7 – Issue 15 In Jeff Blankenburg's latest WP7 post, he's sharing some interesting insight into Trial Mode and app sales... from the standpoint of someone selling apps. Blend Bits 20–Group Into Mike Taulty has Part 20 of his Blend Bits series up. This one is demonstrating grouping, and what all can be accomplished (or not) with grouping in Blend. XNA for Silverlight developers: Part 0 - Why should I care? Peter Kuhn has the beginning of a series on WP7 and XNA up at SilverlightShow... this looks to be a good intro and way to get your head wrapped around XNA on the phone. Navigation in a #WP7 application with MVVM Light Laurent Bugnion discusses WP7 navigation via MVVM Light, resolving many of the communication/navigation complexities you can get involved in without a tool like his. Motion detection in Silverlight Vangos Pterneas has a followup postto the one on facial detection... this one is on Motion Detection in Silverlight. If you've got a webcam hooked up, you can give a demo app a dance via a link he has in the post. Adding ApplicationBar in Windows Phone 7 using Expression Blend Senthil Kumar follows up a post about using VS to add an application bar to a WP7 app with this one using Expression Blend Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• PPPD Is Locking the Modem and Not Releasing It

  - by Skid

  Got an issue with PPPD on one of our system, we have a PC that is used to talk to remote sites via a dial up connection, the modem can both connect out to the sites and the sites also dial back in. Currently I'm having an issue where some times a site ether dials in or we dial out, and it connects, but then blocks the modem and throws and error to kern.log. Aug 26 14:23:57 TM-SCADA kernel: [191233.503745] INFO: task pppd:8142 blocked for more than 120 seconds. Aug 26 14:23:57 TM-SCADA kernel: [191233.503750] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 26 14:23:57 TM-SCADA kernel: [191233.503753] pppd D ffffffff8180cb40 0 8142 1 0x00000000 Aug 26 14:23:57 TM-SCADA kernel: [191233.503759] ffff8800ac1f5dc8 0000000000000086 ffff8800ac1f5fd8 00000000000137c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503765] ffff8800ac1f4010 00000000000137c0 00000000000137c0 00000000000137c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503770] ffff8800ac1f5fd8 00000000000137c0 ffffffff81c13020 ffff880135df5b80 Aug 26 14:23:57 TM-SCADA kernel: [191233.503775] Call Trace: Aug 26 14:23:57 TM-SCADA kernel: [191233.503784] [<ffffffff8166ba29>] schedule+0x29/0x70 Aug 26 14:23:57 TM-SCADA kernel: [191233.503790] [<ffffffff813db005>] tty_ldisc_ref_wait+0x65/0xb0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503796] [<ffffffff813f3061>] ? uart_ioctl+0xd1/0x1c0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503801] [<ffffffff81076960>] ? wake_up_bit+0x40/0x40 Aug 26 14:23:57 TM-SCADA kernel: [191233.503806] [<ffffffff813d3fa0>] tty_ioctl+0x2c0/0x9a0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503810] [<ffffffff811d0549>] ? fcntl_setlk+0x69/0x200 Aug 26 14:23:57 TM-SCADA kernel: [191233.503815] [<ffffffff81195f79>] do_vfs_ioctl+0x99/0x330 Aug 26 14:23:57 TM-SCADA kernel: [191233.503820] [<ffffffff81195212>] ? do_fcntl+0x232/0x410 Aug 26 14:23:57 TM-SCADA kernel: [191233.503823] [<ffffffff811962b1>] sys_ioctl+0xa1/0xb0 Aug 26 14:23:57 TM-SCADA kernel: [191233.503829] [<ffffffff81674e69>] system_call_fastpath+0x16/0x1b The syslog trace stops at "Serial connection established". Aug 28 06:00:03 TM-SCADA pppd[10358]: pppd 2.4.5 started by root, uid 0 Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO CARRIER) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO DIALTONE) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (ERROR) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (NO ANSWER) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (BUSY) Aug 28 06:00:04 TM-SCADA chat[10360]: abort on (Username/Password Incorrect) Aug 28 06:00:04 TM-SCADA chat[10360]: send (atz^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (OK) Aug 28 06:00:04 TM-SCADA chat[10360]: atz^M^M Aug 28 06:00:04 TM-SCADA chat[10360]: OK Aug 28 06:00:04 TM-SCADA chat[10360]: -- got it Aug 28 06:00:04 TM-SCADA chat[10360]: send (atx0^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (OK) Aug 28 06:00:04 TM-SCADA chat[10360]: ^M Aug 28 06:00:04 TM-SCADA chat[10360]: atx0^M^M Aug 28 06:00:04 TM-SCADA chat[10360]: OK Aug 28 06:00:04 TM-SCADA chat[10360]: -- got it Aug 28 06:00:04 TM-SCADA chat[10360]: send (atdt0123456789^M) Aug 28 06:00:04 TM-SCADA chat[10360]: expect (CONNECT/ARQ) Aug 28 06:00:04 TM-SCADA chat[10360]: ^M Aug 28 06:00:30 TM-SCADA chat[10360]: atdt0123456789^M^M Aug 28 06:00:30 TM-SCADA chat[10360]: CONNECT/ARQ Aug 28 06:00:30 TM-SCADA chat[10360]: -- got it Aug 28 06:00:30 TM-SCADA pppd[10358]: Serial connection established. I've only found two ways to release the modem in this condition, the first is to turn the modem off and on again, the second is to delete the serial lock file, and then SIGKILL pppd. Now I could write into our software to do the latter if the modem is locked, but I would rather stop it from locking in the first place if at all possible. The reason I put this issue in the askubuntu is because we used to use OpenSuse and never had an issue with it, admittedly that was version 11.2 or earlier so its still and old kernel, but I figured I would ask here first anyway. Any suggestions of places to look would be appreciated.

  Read the article

• New JavaScript Editor

  - by Petr

  I did not write a blog post here for a few weeks. I think the last my post was  about releasing NetBeans 7.1 in the beginning of January. The reason is not that I would change the job:), but that I have concentrated on new JavaScript support/editor. The new JavaScript editor is written basically from scratch. The answer for the question "Why from beginning again, why do you just improve the old one?" is not easy and the decision has more aspects. One of the main reasons is that the old support was written 4 years ago and the architecture is limited. Also during the time, the APIs were changed and it was very hard to keep the editor up to date. Also there is a license issue etc. In short, it is time to rewrite the old JS editor.  We build up strong community about the PHP support in NetBeans and because many PHP developers also write JavaScript code I would like to ask you for a help. There is a continual PHP build with the new JavaScript support. You can download the result of the builds here. It's a zip file. You can unzip the file anywhere, where you want. I recommend to run the build with the new userdir, to avoid damaging your current userdir. It shouldn't happened, but just to be sure:). You can achieve this through the switch --userdir. So start the unzipped file from command line from the folder, where you unzipped it, can be done with this command on unix: bin/netbeans.sh --userdir /path/to/new/userdir and on windows: bin\netbeans.exe --userdir D:\path\to\new\userdir For the developers who use continual php build already, it's well known. There is also full IDE build with the new JavaScript support for people, who need more than only PHP support.  Because the builds with the new JavaScript editor is created from a branch, there are not nightly builds available. They will be, when we merge the branch to the trunk, but so far we have to work only with the mentioned continual build. We will merge our branch after branching NetBeans 7.2 from trunk. This is also answer for the question, what release of NetBeans will contain the new JS support. It should be the release after NetBeans 7.2. I'm asking you whether you could play with the builds or better, could work in the builds with new JavaScript support and tell us every issue that you run in. It can be everything what doesn't fit you, something doesn't work as you expected, something is slow, you want change the behaviour of a feature etc. Your input / comments are very important for us and it will help us to achieve the new JavaScript support that you need.  The best way how to communicate issues is through our Bugzilla, because it is simple to track them. Sure you can write comment here:), but still I prefer Bugzilla for any issue. You can click here (you should be already log in Bugzilla), a form for the new JavaScript issue is opened, with pre-filled component Editor and NO72 keyword. I will write about the single features later, but now I will mentioned a few features that should work in better way than in the old support.  Syntactic and semantic colouring Navigator Mark Occurrences and GoTo Declaration  Code Completion Code Completion is invoked through keyboard shortcut CTRL+SPACE. The first invocation offers items that are found through a source model. Almost all editor features are based on the model, that is build from source code. There is a lot of work on the model yet, but it should offer better results. When the pop up window with code completion items is open and you press CTRL+SPACE again, then the code completion offers all elements that are in the project. In the pictures all elements that starts with letter 't'. Formatter with many options and more :) A few features are not still implemented that are supported in the old JavaScript support (for example jQuery support), but we are adding this features ASAP.

  Read the article

• Laptop monitor stopped working and can't be re-enabled on a Dell Latitude E6410

  - by xektrum

  I'm using Ubuntu 12.04 (upgraded from 11.10), everything seemed to work fine until today when my laptop monitor suddenly stopped working. Here are the facts: My laptop is a Dell Latitude E6410, Intel graphics. External Monitor is attached through a docking station. Everything worked fine for about 6-7 month, then upgraded to 12.04 Issue started today after a week of upgrade. I think the issue started after I ran CounterStrike 1.6, both monitors blinked and then only the attached monitor which is connected to a docking station continued to work I thought at first that was a transient issue but then I've rebooted, removed the battery but the same happens. Laptop Monitor and external monitor work fine up to login screen, but after I login it goes black Whenever I try to re-enable laptop monitor from Display Manager I get errors: The selected configuration for displays could not be applied could not set the configuration for CRTC 63 Not sure what technical details are required but here are some: $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected (normal left inverted right x axis y axis) 1440x900 60.0 + 40.0 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) $ tail /var/log/Xorg.0.log [ 8367.132] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.132] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy I'm using gnome-shell, and the only ways I've been able to get both display working have been: 1) Booting with laptop disconnected from docking and then re attach external with VGA instead of DVI, but only worked for a session. 2) Removing xserver-xorg-video-intel, but then I gnome-shell is gone as well as dri I would appreciate any suggestions. Regards, ============================= WORKAROUND FOUND ============================= So I have tried few things and here is what worked: I've installed a newer version of xserver-xorg-video-intel (2.19 vs 2.17) from ppa:xorg-edgers/ppa, it didn't work at first, it was only showing low graphics mode, so I tried with a different linux-image 3.0.0-19-generic-pae instead of 3.2.0-24-generic-pae, which I believe is 12.04 precise default, then everything started to work again, Now I've installed 3.4.0-1-generic-pae from same ppa and everything goes flawless so I believe the issue is either with linux-image 3.0.0-19-generic-pae or xserver-xorg-video-intel 2.17. Hope this helps someone in the future. PS: Now xrandr shows multiple modes for my laptop monitor $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 303mm x 189mm 1440x900 60.0*+ 59.9 40.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis)

  Read the article

• Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

  - by Mark

  I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• How do you deal with poor management [closed]

  - by Sybiam

  I come from a company where during a project, we saw the client 3 time during the whole project. We were never informed when did the client came in office in order to discuss with him about his requirements. I did setup redmine and told them that if they have any request they can post an issue there. But they never really used redmine to publish anything. They would instead: harass a team member on the phone at any time of the day or night hand us over sheets of paper with new requests or changes hand us over new design (graphical) They requested how much time it would take us to finish the project, I gave them a date and a week to test everything and deployment. I calculated that time taking into account the current features we had to do. And then blamed us that our deadline was wrong and that we lied. But the truth is that one week before that deadline they added a couple of monster feature from nowhere and that week were we were supposed to test and deploy, my friends spent all day in the office changing all little things. After that project, my friend got some kind of depression and got scared everytime his phone rang. They kind of used him as a communication proxy. After that project of hell, (every body got pissed off on that project) as far as I know the designer who was working with us left work after that project and she had some kind of issue too with managers. My team also started looking for work somewhere else. At first I tried to get things straight with management, I tried to make a meeting to discuss about the communication issues and so on.. What really pissed me off and made me leave that job for good is the following. Me: "We have to discuss about what went wrong on the last project. It's quite important" Him: "Lets talk about it in a week or two. Just make a list of all the things you did wrong" Me: "We already have a new project and we want to prevent what happened on the last project to happen again" Him: "Just do it and well have our meeting in a week, make a list of all the thing you did wrong." It kind of ended there then he organized a meeting at a moment I wasn't unable to come. My friend discussed with him and tried to explained him that we really had to discuss about organization issue on how to manage a project. And his answer was pretty much: "During the meeting I don't want to ear how you want to us to manage a project but I want to know what you guys did wrong" After that I felt it wasn't even worth it discussing anything since they weren't even ready listening to us. Found a new job and I'm pretty happy with my choice. I'd like to know how you'd handle such situation. Is there anything to do to solve communication problem? After that project my friend got a depression and some other employee had their down too as far as I know. I wonder what else we can do other than leave these place as soon as possible. Feel sad for the people that are still there and get screamed at just because they need money in order to eat and finding an other job like that isn't that easy. note I died a little when our boss asked us to make a list of things we (programmers) did wrong. This is probably the stupidest request I ever got. If everybody thinks they did everything right, it doesn't mean that there is no problems. Individual problem are rarely the big issue. Colleagues help each others and solve theses issues to prevent problems.

  Read the article

• Intermittent internet connectivity

  - by Rob Oplawar

  UPDATED: I recently built a new computer and set it up to dual-boot Windows 7 and Ubuntu 11.10. In Windows, using the same hardware, my LAN connectivity is solid. In Ubuntu, however, my network interface periodically dies and resets itself; I'll have a solid connection for 30 seconds, and then it will go out for 30 seconds. When I tail the log: tail -f /var/log/kern.log I see "eth0 link up" messages appear periodically, corresponding with the return of connectivity. I posted the original question months ago, and misinterpreted what was going on. With a working Internet connection in Windows, I ignored the problem for some months. See my answer below for the solution (drivers). ORIGINAL POST In Ubuntu, although I maintain a solid connection to my LAN (pinging the router IP address consistently returns a good result), my internet connectivity drops in and out. When I continuously ping 74.125.227.18 (a google.com server), I get responses for a while, then I start getting "Destination Host Unreachable" for a while, then I get responses again. This happens consistently, dropping the connection for about 30 seconds out of every minute or two. Whether I configure my network via the network manager or via /etc/network/interfaces seems to make no difference. I configure with the following settings: address 192.168.1.101 network 192.168.1.0 gateway 192.168.1.99 (my router's IP address) netmask 255.255.255.0 (confirmed as the right netmask for the router) broadcast 192.168.1.255 (also confirmed with the router). ifconfig confirms that these settings are working: eth0 Link encap:Ethernet HWaddr 50:e5:49:40:da:a6 inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe40:daa6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11557 errors:0 dropped:11557 overruns:0 frame:11557 TX packets:13117 errors:0 dropped:211 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9551488 (9.5 MB) TX bytes:1930952 (1.9 MB) Interrupt:41 Base address:0xa000 I get the same issue when I use automatic DHCP address settings, although I did confirm that there is no other machine on the network with the static IP address I want to use. As I said, the connection to the local network stays solid - I never have any trouble pinging 192.168.1.* - it's internet addresses that I intermittently cannot reach. It's not a DNS issue because pinging known IP addresses directly shows the same behavior. Also, I don't think it's a hardware issue, as I never have any internet connectivity problems on the same machine in Windows. The network hardware is built into the motherboard: Gigabyte Z68XP-UD3P. I managed to bring the OS fully up to date, according to the update manager, but it didn't fix the issue, and with my limited understanding of network architecture I'm at my wit's end. The only clue I can see is that ifconfig is reporting a lot of dropped packets, but I'm not sure what to do about it. UPDATE: It seems my problem is a little more generic than I described; now when I try pinging my router and google simultaneously, they both go unreachable at the same time. Running ifdown eth0 and then ifup eth0 brings it back temporarily; if I just wait it comes back after a couple of minutes. I'll broaden my search through intermittent network connectivity problems.

  Read the article

• PCI Encryption Key Management

  - by Unicorn Bob

  (Full disclosure: I'm already an active participant here and at StackOverflow, but for reasons that should hopefully be obvious, I'm choosing to ask this particular question anonymously). I currently work for a small software shop that produces software that's sold commercially to manage small- to mid-size business in a couple of fairly specialized industries. Because these industries are customer-facing, a large portion of the software is related to storing and managing customer information. In particular, the storage (and securing) of customer credit card information. With that, of course, comes PCI compliance. To make a long story short, I'm left with a couple of questions about why certain things were done the way they were, and I'm unfortunately without much of a resource at the moment. This is a very small shop (I report directly to the owner, as does the only other full-time employee), and the owner doesn't have an answer to these questions, and the previous developer is...err...unavailable. Issue 1: Periodic Re-encryption As of now, the software prompts the user to do a wholesale re-encryption of all of the sensitive information in the database (basically credit card numbers and user passwords) if either of these conditions is true: There are any NON-encrypted pieces of sensitive information in the database (added through a manual database statement instead of through the business object, for example). This should not happen during the ordinary use of the software. The current key has been in use for more than a particular period of time. I believe it's 12 months, but I'm not certain of that. The point here is that the key "expires". This is my first foray into commercial solution development that deals with PCI, so I am unfortunately uneducated on the practices involved. Is there some aspect of PCI compliance that mandates (or even just strongly recommends) periodic key updating? This isn't a huge issue for me other than I don't currently have a good explanation to give to end users if they ask why they are being prompted to run it. Question 1: Is the concept of key expiration standard, and, if so, is that simply industry-standard or an element of PCI? Issue 2: Key Storage Here's my real issue...the encryption key is stored in the database, just obfuscated. The key is padded on the left and right with a few garbage bytes and some bits are twiddled, but fundamentally there's nothing stopping an enterprising person from examining our (dotfuscated) code, determining the pattern used to turn the stored key into the real key, then using that key to run amok. This seems like a horrible practice to me, but I want to make sure that this isn't just one of those "grin and bear it" practices that people in this industry have taken to. I have developed an alternative approach that would prevent such an attack, but I'm just looking for a sanity check here. Question 2: Is this method of key storage--namely storing the key in the database using an obfuscation method that exists in client code--normal or crazy? Believe me, I know that free advice is worth every penny that I've paid for it, nobody here is an attorney (or at least isn't offering legal advice), caveat emptor, etc. etc., but I'm looking for any input that you all can provide. Thank you in advance!

  Read the article

• Silverlight Binding with multiple collections

  - by George Evjen

  We're designing some sport specific applications. In one of our views we have a gridview that is bound to an observable collection of Teams. This is pretty straight forward in terms of getting Teams bound to the GridView. <telerik:RadGridView Grid.Row="0" Grid.Column="0" x:Name="UsersGrid" ItemsSource="{Binding TeamResults}" SelectedItem="{Binding SelectedTeam, Mode=TwoWay}"> <telerik:RadGridView.Columns> <telerik:GridViewDataColumn Header="Name/Group" DataMemberBinding="{Binding TeamName}" MinWidth="150"></telerik:GridViewDataColumn> </telerik:RadGridView.Columns> </telerik:RadGridView> We use the observable collection of teams as our items source and then bind the property of TeamName to the first column. You can set the binding to mode=TwoWay, we use a dialog where we edit the selected item, so our binding here is not set to two way. The issue comes when we want to bind to a property that has another collection in it. To continue on our code from above, we have an observable collection of teams, within that collection we have a collection of KeyPeople. We get this collection using RIA Serivces with the code below. return _TeamsRepository.All().Include("KeyPerson"); Here we are getting all the teams and also including the KeyPerson entity. So when we are done with our Load we will end up with an observable collection of Teams with a navigation property / entity of KeyPerson. Within this KeyPerson entity is a list of people associated with that particular team. We want to display the head coach from this list of KeyPersons. This list currently has a list of ten or more people that are bound to this team, but we just want to display the Head Coach in the column next to team name. The issue becomes how do we bind to this included entity? I have found about three different ways to solve this issue. The way that seemed to fit us best is to utilize the features within RIA Services. We can create client side properties that will do the work for us. We will create in the client side library a partial class of Team. We will end up in our library a file that is Team.shared.cs. The code below is what we will put into our partial team class. public KeyPerson Coach        {            get            {                if (this.KeyPerson != null && this.KeyPerson.Any())                { return this.KeyPerson.Where(x => x.RelationshipType == “HeadCoach”).FirstOrDefault(); }                 return null;            }        } We will return just the person that is the Head Coach and then be able to bind that and any other additional properties that we need. <telerik:GridViewDataColumn Header="Coach" DataMemberBinding="{Binding Coach.Name}" MinWidth="150"></telerik:GridViewDataColumn> There are other ways that we could have solved this issue but we felt that creating a partial class through RIA Services best suited our needs.

  Read the article

• Using Nemerle in asp.net App_Code directory

  - by Andrew Davey

  I want to use Nemerle in an ASP.NET application. Specifically, putting .n files into App_Code. I added this to my web.config system.codedom/compilers section: <compiler language="n;Nemerle" extension=".n" type="Nemerle.Compiler.NemerleCodeProvider, Nemerle.Compiler"/> When running I get this exception: The assembly '' is already loaded in another appdomain. Setting in machine.config can help solve this issue. Stack trace [HttpException (0x80004005): The assembly '' is already loaded in another appdomain. Setting <deployment retail="true" /> in machine.config can help solve this issue.] System.Web.Compilation.CodeDirectoryCompiler.GetCodeDirectoryAssembly(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories, Boolean isDirectoryAllowed) +8809675 System.Web.Compilation.BuildManager.CompileCodeDirectory(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories) +128 System.Web.Compilation.BuildManager.CompileCodeDirectories() +265 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +320 [HttpException (0x80004005): The assembly '' is already loaded in another appdomain. Setting <deployment retail="true" /> in machine.config can help solve this issue.] System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +58 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +512 System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +729 [HttpException (0x80004005): The assembly '' is already loaded in another appdomain. Setting <deployment retail="true" /> in machine.config can help solve this issue.] System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +8890735 System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +85 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +259 What am I doing wrong?

  Read the article

• Mvc2 validation summary and required metadata

  - by Arnis L.

  source code... Thing is, if i specify required metadata using fluent modelmetadata provider like this= public class Foo { public string Bar { get; set; } } public class FooModelMetadataConfiguration : ModelMetadataConfiguration<Foo> { public FooModelMetadataConfiguration() { Configure(x => x.Bar) .Required("lapsa") ; } } And write this into my view = <% Html.BeginForm(); %> <%= Html.ValidationSummary() %> <%= Html.TextBoxFor(x=>x.Bar) %> <% Html.EndForm(); %> And add this to home controller = [HttpPost] public ActionResult Index(Foo foo) { ViewData["Message"] = "Welcome to ASP.NET MVC!"; return View(foo); } It will output this html = <div class="validation-summary-errors"> <ul> <li>lapsa</li> <li>The Bar field is required.</li> </ul> </div> I can't understand why 2nd error is rendered and how to omit it. Author of System.Web.Mvc.Extensibility framework replied with = I think this is a known issue of asp.net mvc, i could not remember the exact location where I have read it, I suggest you post the issue in asp.net mvc issue tracker over codeplex. But before i post anything on issue tracker - i would like to understand first what exactly is wrong. Any help with that?

  Read the article

• Unable to cast type isse in silverlight

  - by prince23

  error once i clcik on the button i am getting this error. this is my code <sdk:DataGrid MinHeight="100" x:Name="dgCounty" AutoGenerateColumns="False" VerticalAlignment="Top" IsReadOnly="True" Margin="5,5,5,0" RowDetailsVisibilityChanged="dgCounty_RowDetailsVisibilityChanged" RowDetailsVisibilityMode="VisibleWhenSelected"> <sdk:DataGrid.Columns> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <Button Content="+" Click="Button_Click"></Button> </DataTemplate> private void Button_Click(object sender, RoutedEventArgs e) { Button btnExpandCollapse = sender as Button; var Row = DataGridRow.GetRowContainingElement(sender as FrameworkElement); if (Row.DetailsVisibility == Visibility.Collapsed) { Row.DetailsVisibility = Visibility.Visible; } else { Row.DetailsVisibility = Visibility.Collapsed; } if (btnExpandCollapse.Content.ToString() == "+") { btnExpandCollapse.Content = "-"; } else if (btnExpandCollapse.Content.ToString() == "-") { btnExpandCollapse.Content = "+"; } } void dtg_RowDetailsVisibilityChanged(object sender, DataGridRowDetailsEventArgs e) { DataGrid RowDetails = e.DetailsElement as DataGrid if(RowDetails.YourDesiciveFlag = true) { } else { } } } working on this issue from past 3 days any idea how to solve this issue. just going mad on this issue. for expand /collpase in data grid in silverlight. let me know if you people can provide me any code that can solve my issue. thanks in advance prince

  Read the article

• SQL Server 2005 database design - many-to-many relationships with hierarchy

  - by Remnant

  Note I have completely re-written my original post to better explain the issue I am trying to understand. I have tried to generalise the problem as much as possible. Also, my thanks to the original people who responded. Hopefully this post makes things a little clearer. Context In short, I am struggling to understand the best way to design a small scale database to handle (what I perceive to be) multiple many-to-many relationships. Imagine the following scenario for a company organisational structure: Textile Division Marketing Division | | ---------------------- ---------------------- | | | | HR Dept Finance Dept HR Dept Finance Dept | | | | ---------- ---------- ---------- --------- | | | | | | | | Payroll Hiring Audit Tax Payroll Hiring Audit Accounts | | | | | | | | Emps Emps Emps Emps Emps Emps Emps Emps NB: Emps denotes a list of employess that work in that area When I first started with this issue I made four separate tables: Divisions - Textile, Marketing (PK = DivisionID) Departments - HR, Finance (PK = DeptID) Functions - Payroll, Hiring, Audit, Tax, Accounts (PK = FunctionID) Employees - List of all Employees (PK = EmployeeID) The problem as I see it is that there are multiple many-to-many relationships i.e. many departments have many divisions and many functions have many departments. Question Giving the database structure above, suppose I wanted to do the following: Get all employees who work in the Payroll function of the Marketing Division To do this I need to be able to differentiate between the two Payroll departments but I am not sure how this can be done? I understand that I could build a 'Link / Junction' table between Departments and Functions so that I can retrieve which Functions are in which Departments. However, I would still need to differentiate the Division they belong to. Research Effort As you can see I am an abecedarian when it comes to database deisgn. I have spent the last two days resaerching this issue, traversing nested set models, adjacency models, reading that this issue is known not to be NP complete etc. I am sure there is a simple solution?

  Read the article

• ASP.NET Applications Requests/Sec suddenly jumps to a value of about 70 million/sec. on 8 core web

  - by Subhrajit Roy

  We are doing performance testing of an ASP.NET web application with VSTS 2008. We start with 2000 users and slowly ramp up to 5000 users (reaches this user load at around 2.5 hours after the tests start, after this we stay at this user load). The total test duration is of about 6 hours During these runs we have found that the counter Requests/Sec (under category ASP.NET applications) suddenly spikes to a values of 36-72 millions !!!. This keeps on happening intermittently i.e we see this issue once in every 3 performance runs that we give on the same application. In our testing environment we have 4 web servers and interestingly enough we have found that this issue occurs only in the 8 core web servers. Summarizing ... Issue : The counter Requests/Sec (under category ASP.NET Applications) suddenly jumps to a value of about 70 million/sec. on 8 core web servers. This results in an increase in SQL server connections opened by the application. Response time goes for a toss. Error rates also show similar behaviour. However the counter ISAPI Extention Requests/sec does not show any abnormal increase. The graph of this counter almost overlaps with that of counter Requests/Sec till the time of the appearance of the spike.When the spike appears , this counter (ISAPI Extention Requests/sec) actually shows a drop. Test Settings : Performance test run with Visual Studio Team System 2008. Soak test run for 6 hours. Maximum user load 5000 users. This is load is attained at about 2.5 hours into the run and mainted for remaining duration.(i.e for around 3.5 more hrs) This issue is reproducible though happens intermittently. (i.e occurs one in three or four runs) Test Environment : Web site deployed on 4 Web Servers (Windows Server 2003). Of these 2 are 4 core machines and the remaining 2 are 8 core ones. .NET Framework 3.5 SP1 installed on all 4 web servers. Application hosted on IIS 6.0 run in Worker process isolation mode.

  Read the article

• Oracle T4CPreparedStatement memory leaks?

  - by Jay

  A little background on the application that I am gonna talk about in the next few lines: XYZ is a data masking workbench eclipse RCP application: You give it a source table column, and a target table column, it would apply a trasformation (encryption/shuffling/etc) and copy the row data from source table to target table. Now, when I mask n tables at a time, n threads are launched by this app. Here is the issue: I have run into a production issue on first roll out of the above said app. Unfortunately, I don't have any logs to get to the root. However, I tried to run this app in test region and do a stress test. When I collected .hprof files and ran 'em through an analyzer (yourKit), I noticed that objects of oracle.jdbc.driver.T4CPreparedStatement was retaining heap. The analysis also tells me that one of my classes is holding a reference to this preparedstatement object and thereby, n threads have n such objects. T4CPreparedStatement seemed to have character arrays: lastBoundChars and bindChars each of size char[300000]. So, I researched a bit (google!), obtained ojdbc6.jar and tried decompiling T4CPreparedStatement. I see that T4CPreparedStatement extends OraclePreparedStatement, which dynamically manages array size of lastBoundChars and bindChars. So, my questions here are: Have you ever run into an issue like this? Do you know the significance of lastBoundChars / bindChars? I am new to profiling, so do you think I am not doing it correct? (I also ran the hprofs through MAT - and this was the main identified issue - so, I don't really think I could be wrong?) I have found something similar on the web here: http://forums.oracle.com/forums/thread.jspa?messageID=2860681 Appreciate your suggestions / advice.

  Read the article

• Magento - Authorize.net - Get Payment Update for expired transactions

  - by pspahn

  Magento 1.6.1 I have set up Authorize.net (AIM) for the client's store. Previously they were using saved CC method and entering information manually in Authorize.net's merchant terminal. Most of it is working as expected, however for transactions that are flagged as 'Suspected Fraud' by Authorize.net, if the client does not update the transaction manually before the authorization expires, using 'Get Payment Update' in Magento fails because the transaction is expired (I believe it's five days for an authorize only transaction). For the client, it seems the only way to update this order in Magento is to simply delete the order, as it doesn't appear the Paygate model knows about expired transactions. Performing 'Get Payment Update' simply returns 'There is no update for this payment'. I have already modified the file: /app/code/core/Mage/Paygate/Model/Authorize.net to have the correct API URL as described in issue #27117 ( http://www.magentocommerce.com/bug-tracking/issue?issue=12991 - must be logged in to view ). This resolved the button not working for all other orders; however this does not fix the issue I am describing. Is anyone familiar with Authorize.net's AIM API so that we can update these orders in Magento to something that makes sense (canceled, etc.) without having to delete the order? I am thinking it should be a case of adding a new order status to Magento, checking the update for an 'Expired' status, and setting the order to the newly created order status. -- edit -- I just ran a diff for the file mentioned above and noticed that Magento 1.7.0.2 includes the _isTransactionExpired() method which seems like it would be the fix. Can it be as simple as updating this model with the newer version?

  Read the article

• App session cookie not being created in Rails, sporadically

  - by James

  Hi everyone, This is an issue sporadically for very few users, however we haven't been able to replicate it. However I have now got a Chrome instance (Mac) which is reproducing the error (for some unknown reason), and I hope to not restart it until I have this nailed! Rails application, using memcached for session store. While the bug manifests in the _app_session_id cookie not being created, our javascript-generated cookie test and app-generated language cookies are being created successfully. This means that InvalidAuthenticityToken errors are thrown for every form that is submitted by those afflicted - people can't log into the app. The error occurs across all browsers - had reports for IE7 and Firefox (which most users use). Switching to another browser often fixes the issue (though not always), and standard cache-cookie-clear tactics do not. So now that I have got Chrome open which is having the same issue - in development, staging and live environments (meaning http and https). All other browsers are fine. I've restarted the servers and restarted memcached. I don't really want to restart Chrome - in the risk that the issue does go away with that (having said that, it hasn't worked for users). I've been tcpdumping the requests - and although I'll keep digging, I'd love it if anyone had any suggestions, places to start looking, anything. This is really painful ;) Thanks!

  Read the article

• C# DllImport with c++ const char* not working correctly

  - by Shammah

  I have the following function in a C++ DLL extern "C" __declspec(dllexport) bool Exist(const char* name) { //if (g_Queues.find(name) != g_Queues.end()) // return true; //else // return false; return false; } Inside my C# class I have the following: [DllImport("Whisper.dll", EntryPoint="Exist", CallingConvention=CallingConvention.Cdecl)] public static extern bool Exist(string name); Yet, whenever I call my function it ALWAYS returns true, even when I commented out my little function and made it return false. I have the feeling there is something wrong with my calling convention or any other issue with P/Invoking my DLL, probably corresponding with the string and const char*, but for now I am completely clueless. What am I doing wrong? Why does it return true instead of false? EDIT: I have figured out this has nothing to do with the const char* or string, because the problem persists with an empty function. I've tried changing the calling convention between Cdecl and StdCall and neither work correctly. I've also managed to debug my DLL and it's being called correctly and does indeed return false, but once back into C# it somehow is true. Changing the CharSet also had no effect. I've made sure I've supplied my C# program with the latest and correct version of my DLL each time, so that shouldn't be an issue aswell. Again, I am completely clueless on why the result is true when I'm in fact returning false. EDIT2: SOReader provided me with a suggestion which fixes another important issue, see my comment. Sadly, it does not fix the return issue.

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >