Search Results

Search found 5628 results on 226 pages for 'cpu hogging'.

Page 144/226 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Where should I plug in my monitor -- Motherboard or Graphics card?

  - by Jeremy White

  Assuming I am using the following equipment... motherboard with HDMI/DVI & no embedded graphics discrete graphics card (nVidia or ATI) on PCI-E slot Intel CPU with integrated graphics ...where should I plug my monitor into the computer? Presumably, I'll get the fastest speed on games connected directly to the graphics card. But there is also power savings when connecting to the motherboard and accessing the Intel on-board graphics. I've read that some motherboards can switch automatically between the Intel graphics and discrete graphics. Is that something that works well, and where do I connect the monitor to enable that?

  Read the article

• PC doesn't power up anymore

  - by Andrew

  I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

  Read the article

• Out Of Memory Error - Magento

  - by robobobobo

  Ok normally I understand when my server is giving me out of memory errors, but this one has me stumped! I'm running a magento based site, with one or two plugins in it and the rest is pretty basic. The site runs and loads fine wiht no issues. However in the backend - Configuration - Payment Methods it gives me the following out of memory error Fatal error: Out of memory (allocated 39059456) (tried to allocate 85 bytes) in ########/Varien/Simplexml/Element.php on line 84 Now this is where I'm confused..it's allocated more than it tried to allocate? Am I correct there? So how is it running out of memory? My server has 6Gb ram, an SSD and 2 CPU's running WHM with a few other low traffic sites on it. I set my php memory limit to 100mb, 1000mb and finally unlimited but all to no avail! I'm completely lost here, would really appreciate some expertise on this Cheers

  Read the article

• Corrupt mysql system tables

  - by psynnott

  I am having issues with the columns_priv table in the mysql system database. I cannot add new users currently. I have tried repairing it using mysqlcheck --auto-repair --all-databases --password but I get the following output: mysql.columns_priv Error : Incorrect file format 'columns_priv' error : Corrupt Is there any other way to repair this table, or how do I go about replacing it with a blank table? What would I lose by doing that? Thank you Edit (Additional Info) mysqld is currently using 100% cpu constantly. Looking at show processlist, I get: mysql> show processlist; +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | 5 | debian-sys-maint | localhost | mysql | Query | 1589 | Opening tables | ALTER TABLE tables_priv MODIFY Column_priv set('Select','Insert','Update','References') COLL | | | 752 | root | localhost | NULL | Query | 0 | NULL | show processlist | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• Problem identifying which page/page/function locks whole IIS server

  - by fnovak

  Hello, I have problem identifying which page/page/function locks whole IIS server. Out of the blue whole w3wp.exe jumps to CPU 90-98% usage. I have created 3 different application pools to see which w3wp.exe service locks the processor but I am unable to find out this information. I can only see that 2 of 3 services have 0-5% usage and one is jumping around 90-98% after some while. I think some process/function/redirect/sql is doing this but I would like to eliminate it. So far I am not even able to find the source of the problem. On my local development machine with VS2010 everything works like charm and I am unable to replicate problem. The server is windows 2k3 web server, sql server 2k5 and .net 4.0 Thank you for your help, links or any information on this issue. Fero

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• How to know if my nginx is in good health?

  - by Howard

  I am running a nginx on EC2 (m1.small) for SSL termination. I am using 2 workers on Ubuntu, with latest nginx (stable), the network throughput is around 2Mbps and system load average is around 2 to 3. I am wondering if this system is in good health for now, e.g. what is the queue length (I know nginx can handle a lot of concurrent request, but I mean before the request is being served, how many of them need to wait before being served) what is the average queue time for a given request to be served. I want to know because if my nginx is cpu bounded (e.g. due to SSL), I will need to upgrade to a faster instance. My current nginx status Active connections: 4076 server accepts handled requests 90664283 90664283 104117012 Reading: 525 Writing: 81 Waiting: 3470

  Read the article

• Virtualbox and getting the Locked VT-x Error when trying to use more than 1 processor on the session

  - by Dave

  I have installed the latest version of virtualbox onto my Hewlett Pakard (h8-1170uk) I have a intel i7 2600 cpu and 8 gb of ram I can get virtual box to create several sessions of different operating systems at the same time, but whenever i try to get 1 session to open up using more than 1 processor option select ( i wanted one of my session access to 2 processors ) i keep getting this error message VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have search many times and cannot find a option to correct this. I have check my BIOS and there are no options about VT-x or Virtualisation or anything. Am i doing something wrong ? Why does Virtualbox run fine when just using the 1 processor option ?

  Read the article

• Open Source Visualization and Dashboard Software

  - by helios

  I am working on an open source Application Performance Monitoring (APM) software and looking for a visualization tool with dashboard capabilities. I came across Graphite which looks pretty good but wondering if there is anything better out there before I settle down with that tool. Here's the list of features I am interested in: Must-Have Open Source license API to submit real time data Web-based visualization interface Persistence - file or database Nice-To-Have Dashboard Capabilities: Allow users to select a few metrics (CPU, Heap Usage, # of Active Users etc.) and place them on a single page for easier monitoring. Any suggestions?

  Read the article

• How do I tell if my Windows server is swapping?

  - by churnd

  I'm using Process Explorer to monitor my windows server while it reconstructs some data. It's primarily a CPU intensive process, but I want to make sure it's not swapping. How can I tell if it is using Process Explorer? My initial guess is in the System Information window, it's Paging File Write Delta. Yes? No? I'm an idiot? *Screenshot is not of the server... just an example.

  Read the article

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Apache worker is crashing after 3.000 users

  - by user1618606

  I activated Apache Worker on my VPS and I'm having problems, 'cause the website is crashing when 3000 users are accessing the website. I'm using http://whos.amung.us/stats/2jzwlvbhvpft/ as counter. My Apache Worker configuration: KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 1 <IfModule mpm_worker_module> ServerLimit 20000 StartServer 8000 MinSpareThreads 10400 MaxSpareThreads 14200 ThreadLimit 5 ThreadsPerChild 5 MaxClients 20000 MaxRequestsPerChild 0 </IfModule> The VPS have the SO: Debian 64 LAMP, memory: 14gb and CPU: 24ghz What I could to do to give a best performance?

  Read the article

• Why do some software not get load balanced even when there are multiple cores?

  - by Nav

  While VTune Analyzer was running on a blade server with 8 cores, I observed the cpu useage percentage using mpstat -P ALL 1. mpstat showed me that VTune was taking up 100% of a single core, while all other cores were idle. Why does that happen? Shouldn't the OS (RHEL Server 5.2) automatically distribute load across cores? The same happened when I tried running MATLAB (even after enabling multithreading support in the MATLAB settings). p.s: I'm a developer. Not a sys admin. So felt it better to ask here rather than at serverfault.

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• Is mumble safe (privacy wise)?

  - by AnonymousLurker

  When chatting on IRC, it is possible to leak data like OS, CPU type if the IRC client happens to leak it in VERSION string. Anybody doing /CTCP VERSION can see it. Same about timezone (/CTCP TIME). This can be mitigated by turning replies to CTCP queries off. Also, IP address is leaked to others (/whois nickname will show it if it's not cloaked). By analogy, does the mumble client expose such sensitive data to others that are connected to the same server? If it does, what are the ways to mitigate this?

  Read the article

• What are best monitoring tool customizable for cluster / distributed system?

  - by Adil

  I am working on a system having multiple servers. I am interested in monitoring some server specific data like CPU/memory usage, disk/filesystem usage, network traffic, system load etc. and some other my process specific data. What are available open source that can serve my purpose? If it provides to customize the parameter to be monitored and monitor your own data by creating plugin / agent. Any suggestions? I heard of Nagios, Zabbix and Pandora but not sure if they provide such interface.

  Read the article

• memtest incorrectly recognizes my RAM

  - by Brendan Abel

  I recently built a computer and randomly got a couple blue screens. I've run memtest and one of the memory sticks consistently throws memtest errors, while the other does not. The odd part is, memtest lists the following settings for my RAM: RAM: 535 MHz DDR 107 / CAS 2.5-1-3-1 DDR1 128 bits But my RAM is DDR3 1600? Memtest also lists my cpu as AMD K8, even though it's K10. I've probably going to RMA the ram stick, but I just wanted to see if anyone had any insight into the weird memtest stats.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• teamviewer display is slow to refresh

  - by brunoais

  I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

  Read the article

• Setting up Ubuntu Server for hosting Java web applications

  - by Denis Hoss

  I'm trying to set up an Web Server running Ubuntu server to host some Java web applications, with MySQL running on it, an so on .. here is the tutorial I follow: perfect server ubuntu 11.10 The server configuration is: CPU S1155 INTEL Pentium G850 2.9GHz VGA 5GTs 3MB 65W MB Gigabyte GA-H77-D3H Ram 4x4Gb HDD 5x1TB Seagate (4 in RAID5 and 1 for Backup) The problem is that when I am trying to install the Server version of Ubuntu, when the installer asks me whether to activate ATA RAID Devices, and I click yes, he sees only that one, if I click no, he sees all 5 HDD's separate without any RAID, is this normal? I also tried to install the Desktop version on RAID5, but after restart, Ubuntu does't want to boot up, an underscore stands on the top of the screen. I am a newbie in servers and their configuration, in fact I am developer. I need a help from you guys.

  Read the article

• JFFS2 poor mount performance

  - by Marcin Polkowski

  I run multiple ARM boards with Debian Linux installed. Board is equipped with 512 MB of NAND memory. I've observed that after ~3 months of continuous run booting time increased significantly - it takes over 3 minutes to mount filesystem (JFFS2). System was using about 35% of available storage so I’ve removed unnecessary files (got to ~18%) but this didn't change anything. Then I realized that my software produces directories that are left empty so I’ve removed ~500 empty and unnecessary dirs. This didn’t help either. After system is started I see JFFS2 garbage collector (jffs2_gcd_mtd4) running and occupying over 90% of CPU. Now my question: is there a way to „optimize” JFFS2 filesystem for better performance - faster booting (my system have limited timid to boot up)? It would be great if this optimization could be done remotely - I have no physical access to boards.

  Read the article

• Why is Firefox so slow and heavy?

  - by Tony

  For some reason, when I go to links the pages seem slow and heavy. It also has a lot of lag spikes between page loads. Basically it seems to freeze then load it all at once fast. I'm currently using Firefox 25. But when I use the same Chrome version, it seems to be very fast and smooth page loading. The CPU it takes on average is about 400,000k. Extensions: iMacros Leethax Ad Block Plus 2.4 Ad Block Plus Pop-up Addon 0.9.1 Computer stats: 6 GB RAM Windows 7 Acer Aspire Laptop 500 GB HDD Intel Core i4-2370M How do I make Firefox load like Google Chrome, without much freezing?

  Read the article

• Printing documents on HP printer very slow

  - by maxim

  I have a strange problem with HP drivers. I have configured a HP printer 2025dn with LAN connection, on 3 pc, using the cd rom of HP driver. All works well, but sometimes for certain documents the time for printing is very slow and long. I observe during this situation, in task manager, a process called rundll32.exe loads CPU at 100%. If I kill that process the printer starts printing fast the document in the queue. I wondering the reason of this strange behaviour.

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >