Search Results

Search found 5628 results on 226 pages for 'cpu hogging'.

Page 148/226 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Xen VGA passthrough: is it possible to have dual GPU's with single monitor

  - by user489481

  I hate dual-booting between Windows when I want to play a game and Linux when I need to work. I don't fancy running Linux in a VM and Wine almost never works for me. So, I'm thinking about buying a new mainboard and CPU that is compatible with Xen's VGA passthrough and HVM virtualization. I want to be able to switch between the Linux Dom0 and Windows DomU with ease, but the problem is I need two GPU's and have only one monitor. Right now I have a nVidia GTX 260 in my PC, but I also have a Radeon 4850 sitting in my closet that I was going to sell. My question is, can I salvage the Radeon card to run the Dom0 and have the nVidia card run the DomU while having some kind of device/software to connect them a single monitor? Power supply and airflow issues aside. If not, what would you suggest? Is this even possible?

  Read the article

• How can I pin point a USB file transfer bottleneck in Unix?

  - by HankHendrix

  I'm experiencing very slow data transfer speeds over USB 2.0 on my nix box and was wondering how I can pin-point the cause of the problem. I've looked into iotop and top but the cpu and mem figures look normal (compared to guides I have checked). The box which is affected is Ubuntu 12.04 32bit Server running on an Asus EEE 701 2G model and I am transferring from the OS over USB 2.0 to an external HDD (which transfers at 30MB/s+ on Windows 7 on other machine). I get rsync write speeds of 1MB/s from OS to USB HDD which seems ridiculously slow. These speeds are consistent with other USB HDDs and sticks.

  Read the article

• large RAID 10 vs small RAID1

  - by user116399

  The machine will store and serve millions of small files (<15Kb each), and all those files require a total storage space of 400G Considering the exact same SATA hard drives maker and models, on the exact same environment (OS, cpu, ram, raid controller, etc...) which one of the setups bellow would be faster? A) RAID 1 with 2 drives of 2T each, making up total storage of 2T B) RAID 10 with 4 drives of 2T each, making up total storage of 4T [EDIT]: I'm aware RAID10 is faster than RAID1. The larger the disk, at least in theory, the longer will take to do seeks/writes. So, will the performance gain of RAID10 will be outweighed by the "drag" caused the larger disk area when seek/write operations happened?

  Read the article

• Intel HD 4000 and Nvidia GT 650 working together on laptop

  - by Juan

  My new win7 Acer notebook has i5 CPU with Intel HD 4000 and Nvida GT650 GPU. Obviously monitor is plugged to Intel HD. In Nvidia control panel I can configure PhysX but that doesn't help. Windows system rating shows high gaming experience and average/low windows aero experience. What does that mean? Does my laptop use nvidia for games/3d apps nad Intel HD 4000 for aero? Should I disable Intel HD in bios, but how to plug monitor to nvidia? Or should I leave everything like now because everything works as it suppose to work? Here is image capture of some states: http://oi47.tinypic.com/34p0qp4.jpg

  Read the article

• Linux freezes every few seconds

  - by Zeppomedio

  We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• Server freeze restarted quickly so how do I fiond what went wrong?

  - by Charlie

  I have a SQL SERVER DB running on a windows server 2008 (VMWare) Yesterday I could not RDP to it so I ended some RDP sessions which were left logged in. This seemed to solve the problem. However last night I learned that the DB was inaccessible and unresponsive to customers. My colleague checked the server but again is unable to create an RDP connection. He then restarted the server and since it has been fine. Looking at the CPU Readings of the Server it spiked up to 100% before the original RDP problem .After I ended the extra seeions uit again dropped down to normal levels however before the time of the customer complaint it had rose to 100% again - before it had to be restarted. Is there anyway I can investigate which processes may have caused the problem in the first place. Would there be some kind of memory dump from when it was restarted. I would prefer to find out what is wrong now instead of waiting until it happens again.

  Read the article

• How can I deactivate the gnome desktop of my ubuntu server?

  - by 19 Lee

  I'm running a home server on my old laptop (atom cpu). I installed ubuntu 12.04 server edition, but I also installed ubuntu-desktop. So, when I turn it on, ubuntu desktop is shown. I sometimes use GUI, but I want to turn the ubuntu-desktop (gnome-desktop) off when I don't use it. I think I can save resources by turning off the GUI. It's necessary since my laptop's performance is not very good and it often becomes very hot. I guess I can run ubuntu-desktop on my terminal with "startx" command. But, I don't know how to turn the X window off for a moment. Anybody have an idea? Thanks in advance.

  Read the article

• bottle.py on EC2 micro instance causes 2 order of magnitude slowdown

  - by user61633

  Cross-posted from StackOverflow: I wrote a little toy script to solve this type of game, and put it on my new micro EC2 instance. It works perfectly, but while it takes around 0.5 seconds to run a local version, and takes under 0.5 seconds to run both the local and the bottle.py version on my home computer, running the bottle.py version on the EC2 instance takes over 2 minutes. Python has the cpu pegged at 99% the entire time. Only 7.4% memory usage, consistently, and no swapping. The only guess I have is initialization time for bottle.py on EC2, but if it were that, why would it be ~200x faster on my own computer with bottle.py?

  Read the article

• Passenger/Rails not releasing memory

  - by michaeldelorenzo

  I have an Ubuntu server running three separate Rails (2.3.8) applications with Passenger, REE and Apache. Recently we started experiencing problems with ruby processes eating up memory and consuming entire cores on our server. Here's what we're getting... %CPU PID USER COMMAND 99.9 1717 nobody Rails: /var/www/api 99.6 5542 nobody Rails: /var/www/api 97.3 1223 nobody Rails: /var/www/api 4.7 5537 nobody Passenger ApplicationSpawner: /var/www/api 10.5 1801 nobody Rails: /var/www/api We've also seen instances where there have been over 100 instances of Apache running. These applications have been running for a few months without an of these issues, but in the last day or so we've been noticing this. The site referenced here is a Rails application that is a RESTful API so it serves many requests every minute. Any guidance on what we should be checking or looking out for would be appreciated.

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• aptana/eclipse blocks other apps

  - by waquner

  Hi, I've got a fresh win7 installation, the only apps installed so far are aptana (beta 3)/eclipse and firefox + chrome (except antivirus and drivers) Every time I start aptana, chrome and firefox are blocked, so firefox can't load a webpage (or sometimes takes veeeery long) and chrome doesn't even take care of events (so for example hovering over a link doesn't change the cursor and a click does...nothing or typing in an url, press enter - nothing happens) First I thought, aptana downloads something and blocks my internet connection... but IE works well and also there are no signs in the taskmanager (cpu%, network or memory) When I close Aptana, all works as before. I tried updating Java, which didn't help... On my office-computer I use the same apps and it works perfect. Got any ideas? TIA, waquner

  Read the article

• PSU aka Power Supply won't turn off and No Power_Good - Safe to keep using?

  - by Tek

  The title is the symptoms of my problem. I mainly chose this title for search engines so people can know why this is happening since I see a lot of uncertainty when it comes to this problem. I do have a question related to the source of the problem though. First of all, Inserting the power to the power supply automatically turns on my computer. Using a power supply tester, the tester automatically turns on without me having to push the button to test the PSU. lol. The PG (Power Good) signal is missing. The strange thing is my computer still turns on (OS boots, etc) considering a missing power good signal. Is it really that unsafe to use the power supply when it's missing the power good signal? All the voltages seem to be in check. Here's a picture: Power Supply Tester Readout And by safe (considering the readout) in the sense that is it likely my components (cpu, mobo, etc) could be damaged?

  Read the article

• What are the current options to encrypted a partition on mac os x ?

  - by symbion

  I recently got my laptop stolen with some sensitive informations on it (personal source code, bank details in a secure file, passwords, etc) and I learnt the lesson: encrypt your sensitive data. Now, I am wondering what are the options to encrypt a partition (not an encrypt disk image) ? Aim: The aim is to prevent anyone (except me) to access those data. Requirement 0: The software must be able to encrypt non system partition. Requirement 1: Plausible deniability is required but preventing cold boot attack is however not an absolute requirement (I am not famous enough or have sensitive enough info to have this kind of requirement). Requirement 2 : Software taking advantage of AES hardware encryption are very welcome as I intent to get a Macbook Pro with i7 CPU (with AES-NI enabled instructions). I will have avirtual machine running in the encrypted partition. Requirement 3 : Free or reasonably cheap. Requirement 4 : Software must run on Mac OS X Snow Leopard or Lion. So far, TrueCrypt is the only option I have found. Regards,

  Read the article

• Full computer freeze with audio stuttering after playing games for a period of time

  - by Wes

  I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

  Read the article

• MySQL Optimizing

  - by Thoman

  Hello My web use an dedicated Intel(R) Xeon(R) CPU E5620 8core 12Gram Centos32bit/Driectadmin DISK SAS 80G Php-cgi This dedicated running one website Use wordpress 2.92(+plugin cache...) Database size 600MB only 100online But mywebsite runing very snow. please hep me config file my.cnf [mysqld] user=mysql key_buffer=128M set-variable = max_connections=1000 socket = /var/lib/mysql/mysql.sock key_buffer =32M table_cache = 1024 open_files_limit = 16344 join_buffer_size = 8M read_buffer_size = 8M sort_buffer_size = 8M tmp_table_size=512M read_rnd_buffer_size=8M max_heap_table_size=256M #myisam_sort_buffer_size=256M thread_cache_size=8 thread_cache=32 query_cache_type=1 query_cache_limit=1024M query_cache_size=1024M thread_concurrency = 16 wait_timeout = 10 connect_timeout = 10 interactive_timeout = 10 long_query_time=1 log-slow-queries = /var/log/mysqlslowqueries.log max_allowed_packet=32M skip-innodb [myisamchk] key_buffer = 64M sort_buffer = 64M read_buffer = 16M write_buffer = 16M [isamchk] key_buffer=64M sort_buffer=64M read_buffer=16M write_buffer=16M And apache

  Read the article

• Uncorrectable machine check

  - by GregC

  I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

  Read the article

• Apache stops serving requests when connections increase

  - by Gunjan

  The values for MaxClients, ServerLimit etc parameters are quite high (4000). Available RAM on the server is high too (~8G). Load average remains below 1 on a 24 core CPU. But when the number of visitors on the website increase apache just stops serving requests. The apache error log is blank and access log shows no more requests coming in. Restarting apache makes it work again until the number of requests increases again. Any ideas where to start looking? UPDATE Getting the below errors in apache error log on running it with LogLevel Debug [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 32 children, there are 479 idle, and 1027 total children

  Read the article

• How do I log file system read/writes by filename in Linux?

  - by Casey

  I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

  Read the article

• Improve efficiency when using parallel to read from compressed stream

  - by Yoga

  Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• Windows 7 extremely long startup

  - by Tyler

  Windows 7 before it even gets to login. On the "starting windows" splash screen takes no less than 15 minutes to finish more like 25 minutes most times. During this time the hard drive activity led indicator is blinking maybe once every 20 seconds. When I finally get to the desktop everything runs normally. I have unplugged all peripherals with same result. Ideas? It's 32bit. 4gig memory. Fast CPU which I can't recall off the top of my head.

  Read the article

• Install Windows with QEMU

  - by Radium

  I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

  Read the article

• transparently set up Windows 7 as remote workstation

  - by Áxel

  Maybe is a very basic question, but I can't find the exact terms to Google for it and find the concrete answer to my doubt. Suppose we have several PCs in which individual employees work. One of them has an extremely powerful CPU, and it's very useful to use that computer to perform heavy computations, but go there and set up your task means its user has to stop working for a while. Is it possible to allow a secondary user account to remotly log in, for example via Remote Desktop, and work with a full user environment, while the main user keeps working under his user session? I've used remote desktop many times in the past, but it always blocked current user session, or even terminated it. Lots of thanks in advance guys.

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >