Search Results

Search found 4431 results on 178 pages for 'social skills'.

Page 144/178 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Using two ports on my ZyXel USG gateway to patch two devices together?

  - by Matthew Beza

  I don't know if this is possible but it would save me many long drives! I have drawn, with my epic MS Paint skills, my current setup. I have a ZyXel USG300 Gateway with a built in 5 port switch. It supports bridging, tunnles, VLANs, etc.. I have a Cisco WLC2112 plugged into port 6 (P6). The cisco is set to 192.168.6.2 and P6 is set to 192.168.6.1. This works but I need to incorporate a Nomadix AG3000 to handle guests. (Router (A) in the picture). So I need the Cisco WLC2112 to use the Nomadix as if it where plugged into it's LAN port. Right now the Nomadix WAN Port is plugged into (P2) on the ZyXel, and the Nomadix LAN port is plugged into (P3). Is it possible to set something up where (P3) and (P6) are somehow "Patched" as if the Cisco was plugged directly into the Nomadix LAN port? Basically making the ZyXel a fancy Cat5e coupler?

  Read the article

• Setting up Windows SBS 2008 network on Xen

  - by samyboy

  I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

  Read the article

• How to disable auto insert notification in Windows 7?

  - by White Phoenix

  Alright, here's the problem. My hard drive activity light on my custom built PC is blinking exactly once every second. Microsoft has this to say on the issue: http://support.microsoft.com/kb/138598 There has been discussion on this issue several months ago: Why does my hard drive LED light blink every second? The problem seems to stem from primarily Windows 7 polling the CD-ROM/DVD drive every second to see if something is inserted. The Windows 7 users in the thread that was linked in the superuser question, https://social.technet.microsoft.com/Forums/fi-FI/w7itprohardware/thread/4f6f63b3-4b58-4154-9298-1566100f9d00, have confirmed that this IS a known issue with Windows 7. Some people point at the motherboard circuitry causing the CD-ROM and SATA activity to both be linked to that hard drive activity, but whatever the case, the temporary solution seems to be to disable the CD/DVD-ROM drive in Device Manager. In fact, disabling the CD/DVD-ROM does stop the blinking, but of course this solution is counterproductive, because I shouldn't have to entirely disable a device to fix this problem. I've done the following suggestions in that thread: Change the autorun registry entry to 0 Completely disable autoplay in the autoplay control panel Disable autoplay in the Local Group Policy Editor. None of these stop the blinking from happening - apparently these solutions work for both XP and Vista, but it seems to be different in Windows 7. So I'm wondering if anyone has found out how to completely disable the polling in Windows 7, or if this will just have to be an issue we will have to deal with. There's no option to disable the auto insert notification when you go to the device within device manager (there was in XP), so I got no idea where this option is hidden, or if there's a registry key entry I could change to stop the polling. Anyone have any idea?

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas? Edit: I completely forgot I'd asked this question until harrymc posted his answer. I've since found out that to fix this problem, I need to disable my Local Area Connection and re-enable it. Once I do that I have no trouble making network connections until the next time I reboot at which point I repeat the process. It's annoying, but manageable since I reboot very infrequently.

  Read the article

• What is the collaborative screen shot/diagramming application recently featured on Hacker News and p

  - by wonsungi

  A few days ago, I saw this video for a screen capture application. I'm pretty sure I followed a link from Hacker News, possibly to a Life Hacker article. The video was very short, but demonstrated how the application could be used: The application was basically a movable/resize-able view port with a button. When the button is pressed, the contents of the view port are saved to an image (basically a screen capture.) The interesting thing is what you could do after that point. One of the specific examples from the video browsed to Google maps street view, grabbed a photo of an intersection, then scribbled notes about where to meet and where the restaurant was in colored "marker." Another example shown was grabbing a house layout from from CAD tool, then scribbling notes on it. The last part of the video showed several possible uses being scrolled through the application's view port. Now, it seemed it was very easy to share these images with other people because there was some type of integration, either with their own site and/or common social websites/chat services. The application was shown running on both Windows and Mac. edit: I think there was an iPhone app, as well. Anyone know what this application is? I tried searching Google, Hacker News, and Life Hacker already. It is not Jing.

  Read the article

• What is the latest on Microsoft Expression Studio licensing?

  - by DanM

  In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

  Read the article

• GnuPG Command Line - Verifying KeePass Signature

  - by Stisfa

  I'm trying to verify the PGP Signature of the latest version of KeePass 2.14's setup file against this signature, but this is the output I receive: C:\Program Files (x86)\GNU\GnuPG>gpg.exe --verify C:\Users\User\Desktop\KeePass-2.14-Setup.exe gpg: no valid OpenPGP data found. gpg: the signature could not be verified. Please remember that the signature file (.sig or .asc) should be the first file given on the command line. C:\Program Files (x86)\GNU\GnuPG> I found this command here, but it made no mention about ".sig" or ".asc" files, so I figured I did something wrong. By reading (http://www.gnupg.org/documentation/manuals/gnupg/gpgv.html#gpgv), I further tried the following: C:\Program Files (x86)\GNU\GnuPG>gpg.exe --pgpfile C:\Users\User\Desktop\KeePass-2.14-Setup.exe gpg: Invalid option "--pgpfile" C:\Program Files (x86)\GNU\GnuPG> As you can see, the results are quite obfuscating... I took a look at this on SuperUser (http://superuser.com/questions/16160/short-easy-to-understand-explanation-of-gpg-pgp-for-nontechnical-people - I couldn't use "a href" due to the built in spam filter that discriminates against users with < 10 rep; this is the same reason for the link above this link), but none of the links seemed to really address my question, at least not directly enough for me to get any idea on how to move forward on this. Can anybody here help me with the esoteric technicality of OpenPGP & the associated use of the GnuPG program? I've felt pretty dumb learning VBS, but this is beyond humiliating: it's absolutely debilitating and maiming whatever confidence I had with my IT skills (then again, I have no justification for making any boast either, as I have yet to get my A+ Cert, lol).

  Read the article

• Trouble installing SSL Certificate on Apache

  - by jahufar

  We have a dedicated server with GoDaddy running Plesk that requires SSL. I've generated the certificate files and I created a vhost_ssl.conf (since I can't edit the default plesk apache configuration http.include, vhost_ssl.conf gets Included to httpd.include) that tells apache where to find the certificate files: SSLCertificateFile /usr/local/psa/var/certificates/domain.com.crt SSLCertificateKeyFile /usr/local/psa/var/certificates/domain.com.key SSLCertificateChainFile /usr/local/psa/var/certificates/sub.class1.server.ca.pem When I stop/start apache, it refuses to start up. The error_log does not have anything on it either (which is strange). Then I opened up httpd.include and found this bit: <VirtualHost 208.xxx.xxx.xxx:443> ServerName domain.com:443 ServerAlias www.domain.com UseCanonicalName Off SSLEngine on SSLVerifyClient none SSLCertificateFile /usr/local/psa/var/certificates/certagC9054 Include /var/www/vhosts/domain.com/conf/vhost_ssl.conf Then I commented out SSLCertificateFile /usr/local/psa/var/certificates/certagC9054 (which is plesk's SSL certificate) and restarted apache and it worked perfectly fine. It seems that Apache does not like multiple SSLCertificateFile within the same VirtualHost directive? As anyone who worked with plesk knows, I can't just remove SSLCertificateFile directive in httpd.include as plesk will overwrite my changes when someone uses it - which is why it's in vhost_ssl.conf. So I'm stuck and this is beyond my meager admin skills. Would appreciate someone who knows what (s)he's doing to tell me whats going on. Thanks in advance.

  Read the article

• How to give wife emergency access to logins, passwords, etc.?

  - by Torben Gundtofte-Bruun

  I'm the digital guru in my household. My wife is good with email and forum websites but she trusts me with all our important digital stuff -- such as online banking and other things that require passwords, but also family photos and the plethora of other digital things in a modern home. We discuss relevant actions but it's always me that executes the actions. If I should get "hit by a bus" then my wife would be thoroughly stranded -- she would have no idea what digital stuff is where on our computer, how to access it, what online accounts we have, and their login credentials are. It would also leave my many public appearances (personal websites, email accounts, social networks, etc.) unresolved. To complicate things, I'm one of those people who don't use password as my password everywhere; I use a mix of SuperGenPass and LastPass, and also two-factor authentication whenever possible. I don't have much hope that she would find her way through a written explanation of all that in a stressful situation. I could just tell her that she should ask my tech-savvy twin brother and then entrust him with my LastPass master passphrase. I feel that would have a high chance of success, but it's inelegant and leaves my wife without control of the information. How can I ensure that my wife has access to my digital remains?

  Read the article

• Loop through several servers, find specific dlls , get the dll version, internal filename and path?

  - by Graham

  I am a newby to Powershell, and using PS v2. I can see the massive potential it has, but I just can't get the following code to work fully. I am trying to end up with a csv file that contains the wild carded required dlls in the GAC_MSIL or sub-directory, get the dll version, internal filename and path, and the server IP address. The code is below, and it is in single line format because it appears easier to remote onto one of the servers in the server farm and run the single line from that console, ue to security log-ins etc. The code has produced a set of results, but only for the last server, it probably does the first server, then overwrites it but I am not sure about that. I have done a lot of reading about using arrays, and custom objects, and had a go at doing that, but my scripting skills in PS are not yet up to it. Code: $out = "Ouput_dll_ver_results.csv";foreach ($server in '11.222.33.123', '11.222.33.124') {$VersionInfo = (Get-ChildItem \$server\C$\windows\assembly\GAC_MSIL -recurse -Include abc*.dll,def*.dll,ghi*.dll,jkl*.dll | Where-Object { $.FullName -notmatch "\windows\assembly\temp\" })}; $VersionInfo | %{Get-Command $.FullName} | select -expand File* |Export-Csv $out Can you please advise if/how the above code can be corrected, and if not, what alternatives do I have to get the information I need. Many thanks in advance. Graham

  Read the article

• What is the latest on Microsoft Expressoin Studio licensing?

  - by DanM

  In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

  Read the article

• How to have SSL on Amazon Elastic Load Balancer with a Gunicorn EC2 server?

  - by Riegie Godwin

  I'm a self taught back end engineer so I'm learning all of this stuff as I go along. For the longest time, I've been using basic authentication for my users. Many developers are advising against this approach since each request will contain the username & password in clear text. Anyone with the right skills can sniff on the connection between my iOS application and my Django/Gunicorn Server and obtain their password. I wouldn't want to put my user's credentials at risk so I would like to implement a more secure way of authentication. SSL seems to be the most viable option. My server doesn't serve any static content or anything crazy of that sort. All the server does is send and receive "json" responses from and to my iOS application. Here is my current topology. iOS application ------ Amazon Elastic Load Balancer ------- EC2 Instances running HTTP Gunicorn. Gunicorn runs on port 8000. I have a CNAME record from GoDaddy for the Amazon Elastic Load Balancer DNS. So instead of using the long DNS to make requests, I just use server.example.com. To interact with my servers I send and receive requests to server.example.com:8000/ This setup works and has been solid. However I need to have a more secure way. I would like to setup SSL between my iOS application and my Elastic Load Balancer. How can I go about doing this? Since I am only sending json responses to my application, do I really need to buy a certificate from a CA or can I create my own? (since browsers will not be interacting with my servers. My servers are only designed to send json responses to my iOS application).

  Read the article

• Shared files folder in Amazon Elastic Beanstalk environment

  - by por

  I'm working on a Drupal application, which is planned to be hosted in Amazon Elastic Beanstalk environment. Basically, Elastic Beanstalk enables the application to scale automatically by starting additional web server instances based on predefined rules. The shared database is running on an Amazon RDS instance, which all instances can access properly. The problem is the shared files folder (sites/default/files). We're using git as SCM, and with it we're able to deploy new versions by executing $ git aws.push. In the background Elastic Beanstalk automatically deletes ($ rm -rf) the current codebase from all servers running in the environment, and deploys the new version. The plan was to use S3 (s3fs) for shared files in the staging environment, and NFS in the production environment. We've managed to set up the environment to the extent where the shared files folder is mounted after a reboot properly. But... The Problem is that, in this setup, the deployment of new versions on running instances fail because $ rm -rf can't remove the mounted directory, and as result, the entire environment goes down and we need restart the environment, which isn't really an elegant solution. Question #1 is that what would be the proper way to manage shared files in this kind of deployment? Are you running such an environment? How did you solve the problem? By looking at Elastic Beanstalk Hostmanager code (Ruby) there seems be a way to hook our functionality (unmount if mounted in pre-deploy and mount in post-deploy) into Hostmanager (/opt/hostmanager/srv/lib/elasticbeanstalk/hostmanager/applications/phpapplication.rb) but the scripts defined in the file (i.e. /tmp/php_post_deploy_app.sh) don't seem to be working. That might be because our Ruby skills are non-existent. Question #2 is that did you manage to hook your functionality in Hostmanager in a portable way (i.e. by not changing the core Hostmanager files)?

  Read the article

• How to add a privilege to an account in Windows?

  - by mark

  Given: A VM running Windows 2008 I am logged on there using my domain account (SHUNRANET\markk) I have added the "Create global objects" privilege to my domain account: The VM is restarted (I know logout/logon is enough, but I had to restart) I logon again using the same domain account. It seems still to have the privilege: I run some process and examine its Security properties using the Process Explorer. The account does not seem to have the privilege: This is not an idle curiousity. I have a real problem, that without this privilege the named pipe WCF binding works neither on Windows 2008 nor on Windows 7! Here is an interesting discussion on this matter - http://social.msdn.microsoft.com/forums/en-US/wcf/thread/b71cfd4d-3e7f-4d76-9561-1e6070414620. Does anyone know how to make this work? Thanks. EDIT BTW, when I run the process elevated, everything is fine and the process explorer does display the privilege as expected: But I do not want to run it elevated. EDIT2 I equally welcome any solution. Be it configuration only or mixed with code. EDIT3 I have posted the same question on MSDN forums and they have redirected me to this page - http://support.microsoft.com/default.aspx?scid=kb;EN-US;132958. I am yet to determine the relevance of it, but it looks promising. Notice also that it is a completely coding solution that they propose, so whoever moved this post to the ServerFault - please reinstate it back in the StackOverflow.

  Read the article

• HP G61 Laptop wont boot- display stays off, caps and num lock indicators blink repeatedly

  - by Benguy12

  I had my HP G61 laptop running in sleep for a while. When I came back to it about a half-hour later, it was no longer in sleep mode - the power light and the Wi-Fi indicator light were on (I keep Wi-Fi off becuase I use a wired connection) - but nothing was showing on screen. In fact, the display wasn't even turned on. So I let it sit for about 10 minutes but nothing happened. I did a force shut down and rebooted. Instead of a normal boot, the display didnt turn on, the Wi-Fi indicator was off, and the Caps Lock and Num Lock lights just blinked repeatedly. On the external keyboard i use, none of the light indicators were blinking or even on. I tried force shut-down again 10 times, then unplugged all connections except for the power cable (my laptop battery dosent hold a charge for more than 2 minutes, so I always must have a wall connection) and tried to boot again but still nothing happened. I unplugged the battery and even then nothing happened. I also tried booting with the disk drive open, and then with it closed again. On the time it was closed, I was able to successfully boot into Windows, but recieved a "Windows did not shut-down sucessfully" notice. Does anybody know why this may have happened? My PC's specs: Windows 7 Home Premium, 64-bit 4GB of physical RAM, 8GB of vRAM (on a flash drive) AMD Vision x64 processor (don't know any other specs about it) ATI Radeon graphics card, 392 MB DVD-R/W lightscribe drive 2 External hard-disks (first one is 1.5TB, second one is 1TB) custom boot-screen and boot-annimation Standard BIOS apps running before sleep: firefox 10.4 itunes 10.6 adobe photoshop extended CS5.1 rockstar games social club (running in background) microsoft powerpoint 2010 professional edition google chrome I was NOT running Aero or any fancy themes - I was using the normal windows classic theme. I have a desktop icon manager application called Stardock Fences that was also running (it runs as a service/process).

  Read the article

• PHP crashing during oAuth scripts

  - by FunkyChicken

  I just installed Nginx 1.2.4 and PHP 5.4.0 (from svn) (php fpm). CentOs 5.8 64 The problem I have is that PHP crashes the moment I run any social oAuth scripts. I have tried to log into Facebook, Twitter and Google with various scripts that I know work on my other servers. When I load the scripts I get a 502 error from Nginx. And I find these errors in the log: in php-fpm log: WARNING: [pool www] child 23821 exited on signal 11 (SIGSEGV) after 1132.862984 seconds from start in nginx log: ERROR: recv() failed (104: Connection reset by peer) while reading response header from upstream From what I can see, it goes wrong when PHP tries to make a request to any of the oAuth servers. https://github.com/mahmudahsan/PHP-SDK-3.0---Graph-API-base-Facebook-Connect-Tutorial-Source for example is one of the scripts that works perfectly on my other machines, but causes PHP to crash. I found: http://stackoverflow.com/questions/3616191/nginx-php-fpm-502-bad-gateway which seems to be a similar problem, but I cannot find a way to solve it. +++ UPDATE +++ Now I have been doing some debugging in 1 of the scripts that is playing up. If you go to line 808 http://pastebin.com/gSnzRtXb it runs the curl_exec() command. When that is ran, it crashes. If i echo'test';exit; just above that line, it echo's correctly, if i do it below that line, php crashes. Which means it's that line 808 which causes the crash. So I made a very simple script to do some testing: http://pastebin.com/Rshnyhcm which also uses curl_exec, but that runs just fine. So I started to dig deeper into that query from the facebook script to see what values the $opts array contains from line 806. Output of that array is: http://pastebin.com/Cq9ffd3R What the problem is, I still have no clue :(

  Read the article

• Hyper-V VM Lab + RRAS + RDP

  - by Dennis Evans

  My background is primarily .NET Development with some System Administration skills. I'm trying to set up a VM Lab for me to test System Applications I'm developing but I've only ever done System Administration in already set up environments; I've never set up my own. My current setup: Server 2008 R2 Hyper-V Host on physical machine (only role enabled) with two NICs. First NIC dedicated for Management w/ DHCP address from company's network. Second NIC dedicated to RRAS VM w/ DHCP address from company's network. RRAS VM has two NICS, one is virtual private internal only NIC w/ static entry. The other is the physical NIC mentioned above. I've joined it to my VMLab.net internal domain. My Active Directory Domain Controller server (ADCT) also runs DNS, DHCP, and Certificate Services which I'm familiar with but don't understand completely. RRAS is already set up with NAT to provide the private internal network with Internet access. What I would like to do is be able to RDP into the servers/computers on the VMLab.net domain from my computer. Do I need to add the Remote Desktop Services role and enable the Remote Desktop Gateway service on RRAS in order to do this or is there a way to set up port forwarding on RRAS to just allow a direct connection to the internal servers...or both? What would the best practices be here? Network Diagram http://i.stack.imgur.com/4qfnk.png

  Read the article

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• Using my old PC as a web/file server?

  - by Garrett

  I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

  Read the article

• Blocking HTTPS and P2P Traffic

  - by Genboy

  I have a Debian server running at the gateway level on a LAN. This runs squid for creating block lists of websites - for eg. blocking social networking on the LAN. Also uses iptables. I am able to do a lot of things with squid & iptables, but a few things seem difficult to achieve. 1) If I block facebook through their http url, people can still access https://www.facebook.com because squid doesn't go through https traffic by default. However, if the users set the gateway IP address as proxy on their web browser, then https is also blocked. So I can do one thing - using iptables drop all outgoing 443 traffic, so that people are forced to set proxy on their browser in order to browse any HTTPS traffic. However, is there a better solution for this. 2) As the number of blocked urls increase in squid, I am planning to integrate squidguard. However, the good squidguard lists are not free for commercial use. Anyone knows of a good squidguard list which is free. 3) Block yahoo messenger, gtalk etc. There are so many ports on which these Instant Messenger softwares work. You need to drop lots of outgoing ports in iptables. However, new ports get added, so you have to keep adding them. And even if your list of ports is current, people can still use the web version of gtalk etc. 4) Blocking P2P. Haven't been able to figure out how to do this till now.

  Read the article

• How do I upgrade Windows Server 2008 R2 Standard (OEM Key) to Enterprise (MSDN Key) using DISM?

  - by Tom Crane

  (Originally asked as After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB but now I know what the question really is...) My Dell server came preinstalled with 2008 R2 Standard. I upgraded to Enterprise to take advantage of more than 32GB RAM. This server is purely for dev and testing, so I want to use my MSDN product key for the upgrade. I originally tried to uprade using the MSDN Enterprise key, but it wouldn't have it: dism /online /Set-Edition:ServerEnterprise /ProductKey:[MSDN key] => Error DISM DISM Transmog Provider: PID=5728 Product key is keyed to [], but user requested transmog to [ServerEnterprise] - CTransmogManager::ValidateTransmogrify I tried several things, including changing the current product key to the MSDN one. Eventually I used a KMS generic key which can be found in several technet forum posts. dism /online /Set-Edition:ServerEnterprise /ProductKey:[KMS Generic Key] ... and this appeared to work. I then changed the product key again (using the control panel) to the MSDN key, thinking that was the end of the matter. Only later when tried to start up VMs did I realise I only had 4GB of usable RAM. I didn't make the connection with the licensing changes at this point and went off on a wild goose chase of BIOS settings, memory configurations and the like. Only later when I saw this... http://social.technet.microsoft.com/Forums/en/winserverTS/thread/6debc586-0977-4731-b418-ca1edb34fe8b ...did I make the connection and reapply the KMS Generic key - which gave me all the RAM back. But now I have a system that isn't properly licensed, presumably I won't be able to activate it as it is, so I've got 2 days to enjoy it. With the MSDN key applied, only 4GB RAM is usable. Is there a way round this without a) rebuilding the server from scratch with the MSDN key from the start or b) buying a retail Enterprise license

  Read the article

• SharePoint, Exchange and Incoming Emails Without Directory Management Services

  - by Nariman

  Trying to keep this as simple as possible. We've already created the email accounts that we need (e.g. account[1-20]@domain.com) on Exchange/AD. We'd like to now enable incoming emails on SharePoint 2007 lists corresponding to these accounts. My thinking is we don’t need to configure Directory Management Services [2] – the architecture will be simpler without it and the application doesn’t require these services. However, we still need to route messages from Exchange to either local SMTP services (via the connector described in the articles below) or by user-specific drop-folder settings (if permitted by Exchange). So the question is: can we instruct Exchange to use a drop folder just for accounts account[1-20]@domain.com? or do we need to change the accounts to account[1-20]@sharepointsmtp.domain.com and re-route those message to the local SMTP service that will drop them on disk? I've read the material below. [1] - http://www.combined-knowledge.com/Downloads/2007/How%20to%20configure%20Email%20Enabled%20Lists%20in%20Moss2007%20RTM%20using%20Exchange%202007.pdf http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/91e0c3d2-afe6-469d-b1bc-6ae7a9aa287e http://gj80blogtech.blogspot.com/2009/12/configure-incoming-email-setting-in.html http://www.jasonslater.co.uk/2007/08/10/configuring-incoming-mail-on-moss-2007-and-exchange-2007/ http://technet.microsoft.com/en-us/library/cc262947%28office.12%29.aspx http://technet.microsoft.com/en-us/library/cc263260%28office.12%29.aspx [2] – http://graycloud.com/sharepoint/incoming-mail-configuration-what-permissions-are-require-t39483.html

  Read the article

• Nagios check_host_alive and check_ping not showing host as down

  - by Kyle

  I am using the check_host_alive command to send 5 packets every minute to all my routers at remote locations. I noticed today I received a notification from The AT&T Global Client Support Center that a router was down (which can take 5-30 minutes to send these notices out) and never received a notice from Nagios. I went onto Nagios and it is was showing the host as alive with a latency of 0ms. This tells me it is seeing the automated response from my router in the data center that, "TTL expired in transit" as a reply from the remote router. Is there anyway for me to tell nagios to check where the reply is comming from? I feel like other people have to of had this issue... I tested it with the check_ping command and it produced the same results. I have the command defined has %hostname% and the proper IP in the host definition, and it works fine for telling me the latency is high. Any ideas are welcome, I have already exercised my Google skills with no results. EDIT: root@IM-UBTU:/# /usr/local/nagios/libexec/check_ping -H 192.168.250.1 -w 100.0,10% -c 200.0,20% -vvv CMD: /bin/ping -n -U -w 10 -c 5 192.168.250.1 Output: PING 192.168.250.1 (192.168.250.1) 56(84) bytes of data. Output: From 10.69.10.2 icmp_seq=1 Time to live exceeded It knows something is wrong why doesn't it give me a warning?

  Read the article

• How to encourage Windows administrators to pick up scripting?

  - by icelava

  When I worked as an administrator in my first job, I was frustrated that our administration processes with Windows servers were a series of point-and-clicks; we could never match the level of efficiency with the Unix servers which had a group of shell scripts to automate a lot of the work. I soon read about WSH and ADSI and wasted no time learning just how much automation I was able to achieve with scripting. There was a huge problem though - almost none of my Windows colleagues were really interested in learning scripting. They seemed happy with the manually mouse-clicking chores and were never excited at the prospect of using scripts to do the work on their behalf. I struggled to convince them to pick up scripting skills despite the evident increases in efficiency. I left that job in pursuit of a full-time software development career thereafter. Almost a decade on working in various environments and different customers, I still encounter Windows administrators mainly possessing this general "mood" where they would avoid scripting as much as possible. Despite the increasing level of accessibility Windows server technologies are opening up for scripting and automation. I am almost certain the majority of administrators are administrators precisely because they absolutely hate performing any kind of programming duties. What are some means to encourage and motivate administrators that scripting can really help them in the long run?

  Read the article

• How to reject messages to unknown user in sendmail cooperating with MS-Exchange?

  - by user71061

  Hi! I have an MS Exchange 2003 configured as a mail server for an organization. As this server is located in this organization internal network and I don't want to expose it directly over internet, I have second server - linux box with sendmail - configured as intelligent relay (it accept all messages from internet addressed to @my_domain, and forward it to internal Exchange serwer, and accepts all messages from this internal Exchange server and forward it over internet). This configuration work's fine, but I want to eliminate messages addressed to not exiting users as early as possible. Good solution could be Enabling on Exchange server function of filtering recipients together with "tar pitting", but in my case this dosn't solve problem, because before any message reach my Exchange server (which could eventually reject it), it has to be already accepted by sendmail server, sitting in front of this Exchange server. So, I want to configure my sendmail server in such a way, that during initial SMTP conversation it could query somehow my Exchange server checking whether recipient address is valid or not, and based on result of this query, accept or reject (possibly with some delay) incoming message in a very early phase. In fact, I have already solved this issue by writing my own, simple sendmail milter program which checks recipient address against text file with list of valid addresses. But this solution is not satisfying me any longer, because it requires frequent updates of this file, and due to lack of time/motivation/programming skills, I don't want to cope further with my source code, adding to it functionality of querying my Exchange server. Maybe I can achieve desired effect by configuring any component of already available linux software. Any ideas?

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >