Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 145/444 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

  • How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

    - by Ibuntu
    I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

    Read the article

  • Newb: First install of ubuntu, no wired or wireless

    - by Ienzo
    Ran 12.04 through a usb drive for a day or so, and had no issues outside of some latency that is more due to the lack of ram on my aspire one D255e than to OS. Had wireless running with no issue, and wired tested as working also. Ran the install and removed windows 7, wireless network is detected but ethernet is not, and neither gets connection. Disabled proprietary driver and rebooted, re-enabled driver and still neither. I know nothing of ubuntu yet! What do? _<

    Read the article

  • How to Convince management that a specific product training is important to QA?

    - by Rahul
    I am leading a QA team of 10 people. we have been received the request for a training of a ETL dataware housing tool for QA, Support and Development. But however the management does not feel that it is important for QA to be involved in such a training as it is support and development team who will be involved ih developing or fixing the issues in the product. How do I convince the management that this training is very important from the QA perspective as this is the team that will find bugs and which will reduce the maintainance cost?

    Read the article

  • Trying to turn an old computer into a server. Where do I start?

    - by Stanton.Sculpture
    My old computer is a mac powerbook g4 that I am considering turning into an Ubuntu Server for my house of eight to share movies and music and whatever. I've never even thought about doing this kind of stuff before so I don't even know where to start. Can someone point me in the right direction? My Concerns: Most of my house mates have macs. Will there be compatibility issues? Can I make it a wireless network? My old powerbook g4 might not have the balls. Money Thanks!

    Read the article

  • Coherence Query Performance in Large Clusters

    - by jpurdy
    Large clusters (measured in terms of the number of storage-enabled members participating in the largest cache services) may introduce challenges when issuing queries. There is no particular cluster size threshold for this, rather a gradually increasing tendency for issues to arise. The most obvious challenges are that a client's perceived query latency will be determined by the slowest responder (more likely to be a factor in larger clusters) as well as the fact that adding additional cache servers will not increase query throughput if the query processing is not compute-bound (which would generally be the case for most indexed queries). If the data set can take advantage of the partition affinity features of Coherence, then the application can use a PartitionedFilter to target a query to a single server (using partition affinity to ensure that all data is in a single partition). If this can not be done, then avoiding an excessive number of cache server JVMs will help, as will ensuring that each cache server has sufficient CPU resources available and is also properly configured to minimize GC pauses (the most common cause of a slow-responding cache server).

    Read the article

  • Broadcom bcm4311 rev2 Full disabled on battery

    - by Antonio BG
    Ok this is my problem... My problem begins while ago when I installed ubuntu 10.10. (is the same with 11.04,11.10...) My wireless card is disabled if the power cord is unplugged, and the only way to fix this is rebooting my pc WITH the power cord plugged and if I use lspci command, it doesn't show me the wireless card. is like if I've removed the wireless board from my laptop port. I've searched a lot of solutions for bcmw4311 issues, but none of them fix my problem because when apply one of the fixes, if I unplug the cord, my wireless card it just gone away... I have dual boot on my pc(w7,ubuntu), I've tried with full installation just to see if this is the problem, but not, is the same. On windows all work correctly with and without power cord.. so this is not a hardware problem, is more like a kernel problem. anyway I can use wireless with power cord plugged, but c'mon this is a laptop not a desktop pc XD haha any help is welcome

    Read the article

  • Does distributing non-GPLd assets with a GPL application violate the license?

    - by Richard Szalay
    This is somewhat related to my other question, but is actually different. I would like to license a Windows Phone application under the GPL. All other Windows Phone Marketplace issues aside (I'll ask those on the forums), I'd like to include icons that ship with the SDK in my application. While this is common practice (documentation points to the icons' location), I'm not sure if I'd be forcing GPL on the icons (a move expressly forbidden by the Application Provider Agreement). How is this usually handled in GPL or am I simply out of luck?

    Read the article

  • is it safe to use jQuery and MooTools together?

    - by user1179459
    I just need to know is it safe to use jQuery and MooTools Together in one web framework? I am not trying create application using both of them, but I am in a situation where I need to modify mootool based application framework, so I am used to jquery, I don't want to waste my time learning mootools and I think jquery is better than the mootools in many contexts like number of applications, plugins etc. so questions are is it safe to use mootools and jquery in one framework? will there be cross browser issues? how robust the application will be when using both?

    Read the article

  • 3.5.0-18 kernel update broke BCM43228

    - by ignition
    After updating the kernel to 3.5.0-18 the Broadcom BCM43228 wireless card of my Acer Aspire One 756 has stopped working properly. The card often refuses to connect to my AP, and if it connects it behaves very unstable. I have already reinstalled the drivers, as recommended by googling around. As far as I can tell the only driver that supports my card is the bcmwl package. I found one solution saying I should install broadcom-sta using module assistant, however I could not get this to install and apparently broadcom-sta and bcmwl are effectively the same driver? Is anyone experiencing similar issues? Is it possible to just downgrade to the previous kernel version?

    Read the article

  • Who makes laptops for Ubuntu?

    - by Tim Lytle
    I'm looking for a laptop and would like to avoid the whole 'is this [specific configuration of hardware] compatible with Ubuntu?' process by finding a laptop manufactured with Ubuntu in mind. I know of system76, but are there any other manufacturers making laptops built to run a standard build of Ubuntu? I'm not counting Dell, as - from my experience - their 'Ubuntu' laptops/netbooks require their build, and because of that have their own set of compatibility issues. UPDATE: And as mentioned in the comments, Dell is no longer selling systems with Ubuntu to consumers.

    Read the article

  • Visual Studio 2010 & .NET 4.0 RC in Feb-2010

    Scott says, In order to make sure that these fixes truly address the performance issues reported, and to Other Interested articles…27 New Features of .NET Framework 4.022 New Features of Visual Studio 2008 for .NET Professionals50 New Features of SQL Server 2008IIS 7.0 New featureshelp validate them across the broadest number of scenarios and machine configurations, we’ve decided to ship another public preview release of VS 2010 and .NET 4 before we ship. Specifically, we plan to make a Release Candidate build available in February that everyone will be able to download and test. It will be a public build and include a broad “go live” license that supports production deployment.The goal behind the Release Candidate is to get broad feedback on the readiness of the product. In order to ensure that we are able to receive and react to this feedback, we will also be moving the launch of Visual Studio 2010 and .NET 4 back a few weeks.Continue span.fullpost {display:none;}

    Read the article

  • Freezes if desktop effects is used [closed]

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • Good resources for learning about graphics hardware

    - by Ken
    I'm looking for some good learning resources for graphics hardware (and associated low level software). Basically I want to learn more about what goes on underneath the opengl/direcx API layers in terms of how things are implemented. I familiar with what happens in principle during the various stages of the rendering pipeline (viewing, projection, clipping, rasterization etc). My goal is to be able to make better and more informed decisions about tradeoffs and potential optimisations when graphics/shader programming with respect to the following kinds of issues; batching view culling occlusions draw order avoiding state changes triangles vs pointsprites texture sampling etc Basically whatever the graphics programmer needs to know about modern graphics hardware in order to become more effective. I'm not really looking for specific optimisation techniques, rather I need more general knowledge so that I will naturally write more efficient code.

    Read the article

  • Is it OK to push my code to GitHub while it is still in early development?

    - by marco-fiset
    I have some projects that are in a very early development state. They are nowhere nearing completion but I do host them (as public repos) on GitHub because: I have multiple computers and I want access to my code everywhere I want a backup for my code I want it to be easy if someone wants to collaborate in some way I use GitHub Issues as a poor man's project management software Is it OK to publish a project on GitHub even when it is very early in the development? I am a bit concerned about someone to come by and say OMG this is total BS, this code is so bad! while looking at unpolished/still in development/not tested code. What are your practices when you start new public projects? Do you wait until you have something substantial to show or you create a bare repo directly on GitHub and start from there? I used GitHub throughout this post but this applies to every code hosting service out there.

    Read the article

  • Recovering a deleted partition

    - by Kishore
    I had a dual boot PC running Ubuntu 12.04 and Windows 7. About a month back, I deleted the Ubuntu partition via the disk management utility (I do not remember whether or not I formatted the partition after performing this action). I ran into some grub issues and used lilo to solve the issue. I followed the simple instructions described in this blog post. I now realize that there were some files in the Ubuntu installation that I need. Of course, I backed up the data, but not this folder apparently. Is there any way to get the data back? I tried following the process suggested on another post on askubuntu (suggesting the use of TestDisk), but was not able to even install TestDisk. The live USB I use is running Ubuntu 12.04 and it does not have a synaptic package manager. Installing from the terminal does not work because even after I type: sudo apt-get update sudo apt-get upgrade the command: sudo apt-get install testdisk fails to work.

    Read the article

  • Slow Wireless Reconnect After Suspend

    - by nrhine1
    I a Broadcom 4312 using the STA drivers, I reinstalled ubuntu because the b43 drivers were giving me a huge hassle along with some weird kernel issues. My wireless speed is fine, everything works well, except upon restart of computer and after taking the computer out of suspend. It takes about 30-45 seconds for the wireless to reconnect, and I think it is a driver issue (I clicked on the network manager at the top and for about 30 seconds there are no wireless networks listed.) I tried this advice already: http://lilserenity.wordpress.com/2007/10/31/fix-ubuntu-dropping-wireless-on-suspendhibernate-resume/ which basically says to change this: STOP_SERVICES="" to STOP_SERVICES="networking" in the file /etc/default/acpi-support This did not help anything. Something to note is that the issue does not occur when I am logging back in after already logging in once and logging out.

    Read the article

  • What Are Some Tips For Writing A Large Number of Unit Tests?

    - by joshin4colours
    I've recently been tasked with testing some COM objects of the desktop app I work on. What this means in practice is writing a large number (100) unit tests to test different but related methods and objects. While the unit tests themselves are fairly straight forward (usually one or two Assert()-type checks per test), I'm struggling to figure out the best way to write these tests in a coherent, organized manner. What I have found is that copy and Paste coding should be avoided. It creates more problems than it's worth, and it's even worse than copy-and-paste code in production code because test code has to be more frequently updated and modified. I'm leaning toward trying an OO-approach using but again, the sheer number makes even this approach daunting from an organizational standpoint due to concern with maintenance. It also doesn't help that the tests are currently written in C++, which adds some complexity with memory management issues. Any thoughts or suggestions?

    Read the article

  • Software center crashing in 12.04

    - by Jordan
    i'm having issues with the Software Center. I'm trying to install Google Chrome, but can't because the software center crashes as soon as it opens. I've looked around at similar topics and found plenty but none of the suggested solutions have worked, so I wonder if this is different. When I type 'software-center' into the terminal, I get the error that other's have had: softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file I know this might seem like a duplicate, but none of the solution worked. Sorry, kind of new to Ubuntu. I use Ubuntu 12.04 lts

    Read the article

  • How to run a complete GUI as root?

    - by Braiam
    I don't care if I mess up the system (which is likely if I do things like this), or the potential security issues that this could imply. Note, that I don't just want to "enable root login?", but run my GUI from bottom-up as root. I don't want to type my password for anything but just for login and have total control over it. Of course, I want any application running as root, like Firefox, LibreOffice, etc. without having to mess up with the terminal. So, how do I do this?

    Read the article

  • Launchpad fails to build a package for my PPA

    - by AZorin
    I'm trying to build a package on Launchpad's Debian build system for PPAs but I'm having some issues with a certain package. The package I'm trying to build (zorin-xwinwrap) contains a source C file which I'm trying to get to compile and build on Launchpad's server so that it would install and work on 32 bit (i386) and 64 bit (amd64) systems. Unfortunately I keep on getting an Error code 2 with the debian/rules file and I have no clue how to fix this issue. The following link is the source package of the software I'm trying to add to my PPA: http://goo.gl/GjZvd The following link is the buildlog for the failed package on Launchpad: http://goo.gl/6A2rQ I would greatly appreciate any suggestions if anyone may have any. Thank you for your time.

    Read the article

  • Ubuntu 11.10 to 12.04 results in loss of N network capability - how to restore?

    - by user74273
    On Ubuntu 11.10, I had zero issues with N network detection and speed. I cannot remember whether the old driver was iwlagn or iwlwifi. This was with Ubuntu repository Linux kernel 3.0.0-22. Upon upgrading to Ubuntu 12.04, iwlwifi is the available driver and while it detects N networks, upon connection, the speed is cripplingly low and DNS look-ups do not occur (impossible to browse). This is with Ubuntu repository Linux kernel 3.2.0-26. Please note that the 11n_disable flag for the iwlwifi module cannot work for me as I require N network access. Is there another solution? Perhaps, is there a way to easily patch the new kernel with the old wireless module (just copy-and-paste the iwlagn module into the new kernel source and re-compile)? Relevant hardware specs: Dell Inspiron N5110 Network Adapter: Intel® Centrino® Wireless-N 1030

    Read the article

  • Best way of accessing data on different pages

    - by Gaz83
    I'm looking for a way to load data into properties/variables etc and have this information accessible to all the pages of my app. I want the information to be loaded via a background thread to keep UI thread free. Some of the pages will have various properties of their controls binding to these global properties. Here is what I tried. Created a static class. All pages could access the data but can't bind. Changed the static class to a Singleton and used DependencyProperty's. All pages could access data and binding worked fine but cross-threading issues when accessing via background threads. I have read in various places on this subject but haven't really come up with the best method yet for my situation.

    Read the article

  • is 'protected' ever reasonable outside of virtual methods and destructors?

    - by notallama
    so, suppose you have some fields and methods marked protected (non-virtual). presumably, you did this because you didn't mark them public because you don't want some nincompoop to accidentally call them in the wrong order or pass in invalid parameters, or you don't want people to rely on behaviour that you're going to change later. so, why is it okay for that nincompoop to use those fields and methods from a subclass? as far as i can tell, they can still screw up in the same ways, and the same compatibility issues still exist if you change the implementation. the cases for protected i can think of are: non-virtual destructors, so you can't break things by deleting the base class. virtual methods, so you can override 'private' methods called by the base class. constructors in c++. in java/c# marking the class as abstract will do basically the same. any other use cases?

    Read the article

  • Empathy authentication error to XMPP server

    - by Shauna
    I recently installed Ubuntu 12.04 on a new machine and have been working on setting it up, but I've run into an interesting problem. I have a custom XMPP server for work (I don't control it, but we're using an in-house install). I can connect to it just fine via Pidgin, but due to some UI issues I'm having with Pidgin (and what appears to be better overall integration between Empathy and Ubuntu/Unity), I'd like to use Empathy instead. However, Empathy won't connect to my XMPP server, and I keep getting an authentication error and repeatedly prompted for my password. This happens even when importing the working account information from Pidgin (so I know things like the password are correct). Is there a way I can get Empathy working with my XMPP server?

    Read the article

  • Check Out The New Search Helper For 'Adpatch' Utility

    - by LuciaC
    Have you seen the new Search Helper for problems and documentation relating to the 'adpatch' utility?   Check out the details in Doc ID 1502809.1. The Search Helper presents you with a wizard-like interface where you select the task you are attempting, the symptoms or errors you are hitting and arrives at a targeted list of solutions based on that information.  This is a simple and quick way of searching for any issues that you are having with adpatch. How to use this tool: 1. Select the intent or task that is failing. 2. A list of known symptoms (or facts) associated with the task will display under the section "In addition the following occurs". 3. As you select symptoms the solutions section will populate (and change as you select or deselect).

    Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >