Search Results

Search found 14251 results on 571 pages for 'identity management'.

Page 152/571 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

• How can I control disk numbering (enumeration) in Windows 7 Disk Management?

  - by tim11g

  A desktop system had two drives (Assigned C and D, which were enumerated in Disk Management as Disk 0 and Disk 1). A new SSD was added as the boot drive, after copying the C drive to the SSD. The SSD was connected to SATA 0 (master) port on the motherboard. The previous C Drive was moved to SATA 2 and is reformatted as a non-booting NTFS partition. The D drive remained on SATA 1. The system boots and everything seems fine. I was able to manually adjust the Drive Letters. However, the list in Disk Management is re-ordered. Disk 0 is the the previous Disk 2 (D Drive) on SATA 1, Disk 1 is the new Boot Drive (now C) on SATA 0, and Disk 2 is the former C Drive (now assigned E) on SATA 2. Does the Disk 0, 1, 2, designation mean anything? I would prefer to have them display in Disk Management as Drives C, D, and E from top to bottom. Is the Disk enumeration based on the SATA port or something else? (If it was based on SATA Port, they should be ordered C, D, E. Is there any way to re-order the Disk number assignments? What actually does determine the Disk number enumeration?

  Read the article

• Handling conflicting priorities and expectations in project development

  - by jasonk

  There are any number of situations in the standard day where priority conflicts exist for projects. Management wants maximum productivity from employees. Marketing wants maximum salability and fast turnaround. Ownership wants maximum profit. Customers want usability and low cost. Regardless of the origin of the demands, time and money are always the limiting factor in business. Sometimes project elements have intrinsic or goodwill benefits for which there is not a hard, fast way to measure with monetary means (e.g. arguments for an attractive UI appeal vs. functional but plain). Other elements of software may have a method of providing “mental breaks” or motivating “cool factor” for developers that can get them back on track on other bigger, complex issues. While they may sidetrack the project short term they may have greater results long term through improved job satisfaction, etc. Continued training is a must, but working it in can setup back progress. What are your suggestions for setting priorities? How do you evaluate requests/demands on your projects? What are your suggestions for communicating and passing those on to your team in a way that they stay focused?

  Read the article

• [Cocoa] Can't find leak in my code.

  - by ryyst

  Hi, I've been spending the last few hours trying to find the memory leak in my code. Here it is: NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; expression = [expression stringByTrimmingCharactersInSet: [NSCharacterSet whitespaceAndNewlineCharacterSet]]; // expression is an NSString object. NSArray *arguments = [NSArray arrayWithObjects:expression, [@"~/Desktop/file.txt" stringByExpandingTildeInPath], @"-n", @"--line-number", nil]; NSPipe *outPipe = [[NSPipe alloc] init]; NSTask *task = [[NSTask alloc] init]; [task setLaunchPath:@"/usr/bin/grep"]; [task setArguments:arguments]; [task setStandardOutput:outPipe]; [outPipe release]; [task launch]; NSData *data = [[outPipe fileHandleForReading] readDataToEndOfFile]; [task waitUntilExit]; [task release]; NSString *string = [[NSString alloc] initWithBytes:[data bytes] length:[data length] encoding:NSUTF8StringEncoding]; string = [string stringByReplacingOccurrencesOfString:@"\r" withString:@""]; int linesNum = 0; NSMutableArray *possibleMatches = [[NSMutableArray alloc] init]; if ([string length] > 0) { NSArray *lines = [string componentsSeparatedByString:@"\n"]; linesNum = [lines count]; for (int i = 0; i < [lines count]; i++) { NSString *currentLine = [lines objectAtIndex:i]; NSArray *values = [currentLine componentsSeparatedByString:@"\t"]; if ([values count] == 20) [possibleMatches addObject:currentLine]; } } [string release]; [pool release]; return [possibleMatches autorelease]; I tried to follow the few basic rules of Cocoa memory management, but somehow there still seems to be a leak, I believe it's an array that's leaking. It's noticeable if possibleMatches is large. You can try the code by using any large file as "~/Desktop/file.txt" and as expression something that yields many results when grep-ing. What's the mistake I'm making? Thanks for any help! -- Ry

  Read the article

• What are the reasons to store documents into DBMS when using Alfresco CMS

  - by Julia

  Hello guys! I have interview for an internship with company that wants to implement document management system and they are considering on the first place open source solutions, their top choice being Alfresco, but decision is still not final, part of my work there would be to investigate is Alfresco the best solution. What I have seen from project description, is that they would implement Alfresco with MySQL database, and not to use DBMS just for document metadata and indexing, but they actually want to store documents inside. By company profile, type of documents would be mostly PDF and .doc, not images. I have researched a bit, and I have read all the topics here related to storing files into the database, not to duplicate a question. So from what I understand, storing BLOBS is generally not recomendable, and by the profile of the company and their legal obligations with archiving, I see they will have to store larger amount of docs. I would like to be ready as much as I can for the interview and that is why I would like your opinion on these questions: What will be your reasons for deciding to store documents into the DBMS, (especially having in mind that you are installing Alfresco, which stores files in the FS)??? Do you have any experiences with storing documents into the MySQL database specifically??? All the help is very much appreciated, I am really excited about interview and really want this internship, so this is one of things i really want to understand before!! Thank you!!!!

  Read the article

• WPF Spellcheck Engine takes up too much memory.

  - by Matt H.

  Each datatemplate in my WPF ItemsControl contains FIVE custom bindable richtextbox controls. It is a data-driven app that for authoring multiple-choice questions -- The question and four answer choices must all support: 1) Spell check 2) Rich formatting (otherwise I'd use regular textboxes) The spell check object in .NET 4 has a Friend constructor that takes a single argument of owner As TextBoxBase This means every richtextbox in the ItemsControl has 5 Spellcheck objects! This is the problem -- every spell check engine is consuming about 500k memory. So after you favor in the spellcheck, bindings, additional controls in the DataTemplate, etc.. a single multi choice question consumes more than 3MB memory. Users with 100--200 questions will quickly see the App raise it's memory consumption to 500+ MB. Management is definitely not OK with this. Is there a way to minimimze this problem? The best suggestion I've heard is to enable/disable spellcheck if the richtextbox is in the ItemsControl's scrollviewer: I haven't gotten an answer to how to go about it: (http://stackoverflow.com/questions/2869012/possible-to-implement-an-isviewportvisible-dependencyproperty-for-an-item-in-an-i) Any good ideas?

  Read the article

• Does Team Foundation support cross-app workitem groups?

  - by drachenstern

  We're currently using Visual Source Safe and BugNet and looking to migrate up and away from VSS. I've been pushing for either SVN ( a) we're an ASP.NET shop, b) DCVS is not an option - no matter how much I like Hg ;-) or TFS. Well we finally got a new dev server, so I talked the boss into installing TFS on it (30 day trial). In the meantime, we had started experimenting with FogBugz. We really like FogBugz for about 80% of what we want to do, and the other 20% is probably stuff that we don't know what we want. I'm pushing for TFS because it allows for IDE integrated (mostly) everything. He's pushing for FogBugz because he can group tasks by customer and then project and manage everything from one dashboard. (which means I lose most of my IDE integration - no huge loss I agree) Does TFS support a single dashboard that would span all our solutions (in this case each solution is a full app that we sell to a vertical market client) and let us assign workitems to each solution-spanning-group? So for instance I think we envision something like this: PROJECT1 - Bugtracker and workitems PROJECT2 - Bugtracker and workitems PROJECT3 - Bugtracker and workitems CUSTOMER1 - Deployment schedules, required features, specific notes (Uses PROJECT1, PROJECT2) CUSTOMER2 - Deployment schedules, required features, specific notes (Uses PROJECT2, PROJECT3) CUSTOMER3 - Deployment schedules, required features, specific notes (Uses PROJECT1, PROJECT3) Hopefully that makes sense. naturally it's more complicated than this but I think I've given the details enough to paint a picture. I offered the option of creating dummy projects per customer but he doesn't like that and it doesn't really give us the single dashboard view that we're hoping to end up with (and that FogBugz as we've sorta implmented things does do now). Has anyone got a good suggestion on a management app that would accomplish what both of us want?

  Read the article

• What are the reasons to store documents into DBMS when using Alfresco DMS

  - by Julia

  Hello guys! I have interview for an internship with company that wants to implement document management system and they are considering on the first place open source solutions, their top choice being Alfresco, but decision is still not final, part of my work there would be to investigate is Alfresco the best solution. What I have seen from project description, is that they would implement Alfresco with MySQL database, and not to use DBMS just for document metadata and indexing, but they actually want to store documents inside. By company profile, type of documents would be mostly PDF and .doc, not images. I have researched a bit, and I have read all the topics here related to storing files into the database, not to duplicate a question. So from what I understand, storing BLOBS is generally not recomendable, and by the profile of the company and their legal obligations with archiving, I see they will have to store larger amount of docs. I would like to be ready as much as I can for the interview and that is why I would like your opinion on these questions: 1) What will be your reasons for deciding to store documents into the DBMS, (especially having in mind that you are installing Alfresco, which stores files in the FS)??? 2) Do you have any experiences with storing documents into the MySQL database specifically??? All the help is very much appreciated, I am really excited about interview and really want this internship, so this is one of things i really want to understand before!! Thank you!!!!

  Read the article

• iPhone OS: Strategies for high density image work

  - by Jasconius

  I have a project that is coming around the bend this summer that is going to involve, potentially, an extremely high volume of image data for display. We are talking hundreds of 640x480-ish images in a given application session (scaled to a smaller resolution when displayed), and handfuls of very large (1280x1024 or higher) images at a time. I've already done some preliminary work and I've found that the typical 640x480ish image is just a shade under 1MB in memory when placed into a UIImageView and displayed... but the very large images can be a whopping 5+ MB's in some cases. This project is actually be targeted at the iPad, which, in my Instruments tests seems to cap out at about 80-100MB's of addressable physical memory. Details aside, I need to start thinking of how to move huge volumes of image data between virtual and physical memory while preserving the fluidity and responsiveness of the application, which will be high visibility. I'm probably on the higher ends of intermediate at Objective-C... so I am looking for some solid articles and advice on the following: 1) Responsible management of UIImage and UIImageView in the name of conserving physical RAM 2) Merits of using CGImage over UIImage, particularly for the huge images, and if there will be any performance gain 3) Anything dealing with memory paging particularly as it pertains to images I will epilogue by saying that the numbers I have above maybe off by about 10 or 15%. Images may or may not end up being bundled into the actual app itself as opposed to being loaded in from an external server.

  Read the article

• WordPerfect programmers refusing to use anything but assembler

  - by Totophil

  There is a version (popularised by Joel Spolsky) attributing the demise of WordPerfect to a refusal of its programmers to use anything but assembler that led to delay of the first WPwin release and as result eventually to losing the all important battle with Microsoft. There are a few references to programming work being done using assembler in the autobiographical book "Almost Perfect" by W. E. Pete Peterson who used to have a major influence at running the corporation. But these references go back to early 80's when WordPerfect was trying to gain a significant market share by defeating WordStar and not early nineties when the battle with MS took place. I am looking for a second independent source to confirm the assumption. Maybe someone who worked for WordPerfect Corporation at a time, who was close to the company, or had a chance to see the source could clarify the issue. Your help is much appreciated, thanks! Please note that this question is not about any other theories or reasons behind WordPerfect demise. I really just need to clarify whether they used assembler as a primary language for WPwin and (as a bonus really) whether there were discussions held within the corporation about assembler being the right choice. Concisely: Did WPCorp use assembler as a primary language for WPwin? Were discussions held at a time amongst WP Corp staff about assembler being the right choice (was it management or programmers decision)?

  Read the article

• Updating nullability of columns in SQL 2008

  - by Shaul

  I have a very wide table, containing lots and lots of bit fields. These bit fields were originally set up as nullable. Now we've just made a decision that it doesn't make sense to have them nullable; the value is either Yes or No, default No. In other words, the schema should change from: create table MyTable( ID bigint not null, Name varchar(100) not null, BitField1 bit null, BitField2 bit null, ... BitFieldN bit null ) to create table MyTable( ID bigint not null, Name varchar(100) not null, BitField1 bit not null, BitField2 bit not null, ... BitFieldN bit not null ) alter table MyTable add constraint DF_BitField1 default 0 for BitField1 alter table MyTable add constraint DF_BitField2 default 0 for BitField2 alter table MyTable add constraint DF_BitField3 default 0 for BitField3 So I've just gone in through the SQL Management Studio, updating all these fields to non-nullable, default value 0. And guess what - when I try to update it, SQL Mgmt studio internally recreates the table and then tries to reinsert all the data into the new table... including the null values! Which of course generates an error, because it's explicitly trying to insert a null value into a non-nullable column. Aaargh! Obviously I could run N update statements of the form: update MyTable set BitField1 = 0 where BitField1 is null update MyTable set BitField2 = 0 where BitField2 is null but as I said before, there are n fields out there, and what's more, this change has to propagate out to several identical databases. Very painful to implement manually. Is there any way to make the table modification just ignore the null values and allow the default rule to kick in when you attempt to insert a null value?

  Read the article

• Memory usage in Flash / Flex / AS3

  - by ggambett

  I'm having some trouble with memory management in a flash app. Memory usage grows quite a bit, and I've tracked it down to the way I load assets. I embed several raster images in a class Embedded, like this [Embed(source="/home/gabriel/text_hard.jpg")] public static var ASSET_text_hard_DOT_jpg : Class; I then instance the assets this way var pClass : Class = Embedded[sResource] as Class; return new pClass() as Bitmap; At this point, memory usage goes up, which is perfectly normal. However, nulling all the references to the object doesn't free the memory. Based on this behavior, looks like the flash player is creating an instance of the class the first time I request it, but never ever releases it - not without references, calling System.gc(), doing the double LocalConnection trick, or calling dispose() on the BitmapData objects. Of course, this is very undesirable - memory usage would grow until everything in the SWFs is instanced, regardless of whether I stopped using some asset long ago. Is my analysis correct? Can anything be done to fix this?

  Read the article

• Free Memory Occupied by Std List, Vector, Map etc

  - by Graviton

  Coming from a C# background, I have only vaguest idea on memory management on C++-- all I know is that I would have to free the memory manually. As a result my C++ code is written in such a way that objects of the type std::vector, std::list, std::map are freely instantiated, used, but not freed. I didn't realize this point until I am almost done with my programs, now my code is consisted of the following kinds of patterns: struct Point_2 { double x; double y; }; struct Point_3 { double x; double y; double z; }; list<list<Point_2>> Computation::ComputationJob(list<Point_3> pts3D, vector<Point_2> vectors) { map<Point_2, double> pt2DMap=ConstructPointMap(pts3D); vector<Point_2> vectorList = ConstructVectors(vectors); list<list<Point_2>> faceList2D=ConstructPoints(vectorList , pt2DMap); return faceList2D; } My question is, must I free every.single.one of the list usage ( in the above example, this means that I would have to free pt2DMap, vectorList and faceList2D)? That would be very tedious! I might just as well rewrite my Computation class so that it is less prone to memory leak. Any idea how to fix this?

  Read the article

• Web CMS That Outputs to Flat Static Pages (.html) via FTP to Remote Server?

  - by Sootah

  I have a web app project that I will be starting to work on shortly. One of the features included is going to be a content management system where users can add content and then that content will be combined with a template and then output as a regular .html file. This .html file would then be FTPed to their own web host. As I've always believed in not reinventing the wheel I figured I'd see if there are any quality customizable CMSes out there that do this already do this. For instance, Blogger.com allows you to post all of your content to your account there; but offers the option to let you use your own hosting. Any time you publish a new article then a new .html page is generated (as well as an updated index page with links to the new article) and then the updated content is FTPed to your own server. What I would like is something like this that I can modify to more closely suit my needs. Required Features: Able to host on my own server Written in PHP Users add content through their account, then when posted it is FTPed as .html to their server Any appropriate pages are also updated to link to the new content (like the index page or whatnot) Templateable Customizable Optional (but very much desired) features: Written in CodeIgniter or a similar PHP framework While CodeIgniter isn't strictly required, I would very much prefer it. It speeds up development time and makes things much easier to implement. So - any suggestions? I've stumbled across a few CMSes that push to remote servers as static pages, but the ones I've found all are hosted on the developers servers which means that I cannot modify it at all. Thanks again fellow StackOverflowians! -Sootah

  Read the article

• CM and Agile validation process of merging to the Trunk?

  - by LoneCM

  Hello All, We are a new Agile shop and we are encountering an issue that I hope others have seen. In our process, the Trunk is considered an integration branch; it does not have to be releasable, but it does have to be stable and functional for others to branch off of. We create Feature branches of the Trunk for new development. All work and testing occurs in these branches. An individual branch pulls up as needed to stay integrated with the Trunk as other features that are accepted and are committed. But now we have numerous feature branches. Each are focused, have a short life cycle, and are pushed to the trunk as they are completed, so we not debating the need for the branches and trying very much to be Agile. My issue comes in here: I require that the branches pull up from the Trunk at the end of their life cycle and complete the validation, regression testing and handle all configuration issues before pushing to the trunk. Once reintegrated into the Trunk, I ask for at least a build and an automated smoke test. However, I am now getting push back on the Trunk validation. The argument is that the developers can merge the code and not need the QA validation steps because they already complete the work in the feature branch. Therefore, the extra testing is not needed. I have attempted to remind management of the numerous times "brainless" merges have failed. Thier solution is to instead of build and regression testing to have the developer diff the Feature branch and the newly merged Trunk. That process in thier mind would replace the regression testing I asked for. So what do you require when you reintegrate back to the Trunk? What are the issues that we will encounter if we remove this step and replace with the diff? Is the cost of staying Agile the additional work of the intergration of the branches? Thanks for any input. LoneCM

  Read the article

• Correlate GROUP BY and LEFT JOIN on multiple criteria to show latest record?

  - by Sunbird

  In a simple stock management database, quantity of new stock is added and shipped until quantity reaches zero. Each stock movement is assigned a reference, only the latest reference is used. In the example provided, the latest references are never shown, the stock ID's 1,4 should have references charlie, foxtrot respectively, but instead show alpha, delta. How can a GROUP BY and LEFT JOIN on multiple criteria be correlated to show the latest record? http://sqlfiddle.com/#!2/6bf37/107 CREATE TABLE stock ( id tinyint PRIMARY KEY, quantity int, parent_id tinyint ); CREATE TABLE stock_reference ( id tinyint PRIMARY KEY, stock_id tinyint, stock_reference_type_id tinyint, reference varchar(50) ); CREATE TABLE stock_reference_type ( id tinyint PRIMARY KEY, name varchar(50) ); INSERT INTO stock VALUES (1, 10, 1), (2, -5, 1), (3, -5, 1), (4, 20, 4), (5, -10, 4), (6, -5, 4); INSERT INTO stock_reference VALUES (1, 1, 1, 'Alpha'), (2, 2, 1, 'Beta'), (3, 3, 1, 'Charlie'), (4, 4, 1, 'Delta'), (5, 5, 1, 'Echo'), (6, 6, 1, 'Foxtrot'); INSERT INTO stock_reference_type VALUES (1, 'Customer Reference'); SELECT stock.id, SUM(stock.quantity) as quantity, customer.reference FROM stock LEFT JOIN stock_reference AS customer ON stock.id = customer.stock_id AND stock_reference_type_id = 1 GROUP BY stock.parent_id

  Read the article

• When memory is actually freeded?

  - by zhyk

  Hello all. I'm trying to understand memory management stuff in Objective-C. If I see the memory usage listed by Activity Monitor, it looks like memory is not being freed (I mean column rsize). But in "Object Allocations" everything looks fine. Here is my simple code: #import <Foundation/Foundation.h> int main (int argc, const char * argv[]) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSInteger i, k=10000; while (k>0) { NSMutableArray *array = [[NSMutableArray alloc]init]; for (i=0;i<1000*k; i++) { NSString *srtring = [[NSString alloc] initWithString:@"string...."]; [array addObject:srtring]; [srtring release]; srtring = nil; } [array release]; array = nil; k-=500; } [NSThread sleepForTimeInterval:5]; [pool release]; return 0; } As for retain and release it's cool, everything is balanced. But rsize decreases only after quitting from this little program. Is it possible to "clean" memory somehow before quitting?

  Read the article

• PHP Commercial Project Function define

  - by Shiro

  Currently I am working with a commercial project with PHP. I think this question not really apply to PHP for all programming language, just want to discuss how your guys solve it. I work in MVC framework (CodeIgniter). all the database transaction code in model class. Previously, I seperate different search criteria with different function name. Just an example function get_student_detail_by_ID($id){} function get_student_detail_by_name($name){} as you can see the function actually can merge to one, just add a parameter for it. But something you are rushing with project, you won't look back previously got what similar function just make some changes can meet the goal. In this case, we found that there is a lot function there and hard to maintenance. Recently, we try to group the entity to one ultimate search something like this function get_ResList($is_row_count=FALSE, $record_start=0, $arr_search_criteria='', $paging_limit=20, $orderby='name', $sortdir='ASC') we try to make this function to fit all the searching criteria. However, our system getting bigger and bigger, the search criteria not more 1-2 tables. It require join with other table with different purpose. What we had done is using IF ELSE, if(bla bla bla) { $sql_join = JOIN_SOME_TABLE; $sql_where = CONDITION; } at the end, we found that very hard to maintance the function. it is very hard to debug as well. I would like to ask your opinion, what is the commercial solution they solve this kind of issue, how to define a function and how to revise it. I think this is link project management skill. Hope you willing to share with us. Thanks.

  Read the article

• iPhone: Does it ever make sense for an object to retain its delegate?

  - by randombits

  According to the rules of memory management in a non garbage collected world, one is not supposed to retain a the calling object in a delegate. Scenario goes like this: I have a class that inherits from UITableViewController and contains a search bar. I run expensive search operations in a secondary thread. This is all done with an NSOperationQueue and subclasses NSOperation instances. I pass the controller as a delegate that adheres to a callback protocol into the NSOperation. There are edge cases when the application crashes because once an item is selected from the UITableViewController, I dismiss it and thus its retain count goes to 0 and dealloc gets invoked on it. The delegate didn't get to send its message in time as the results are being passed at about the same time the dealloc happens. Should I design this differently? Should I call retain on my controller from the delegate to ensure it exists until the NSOperation itself is dealloc'd? Will this cause a memory leak? Right now if I put a retain on the controller, the crashes goes away. I don't want to leak memory though and need to understand if there are cases where retaining the delegate makes sense. Just to recap. UITableViewController creates an NSOperationQueue and NSOperation that gets embedded into the queue. The UITableViewController passes itself as a delegate to NSOperation. NSOperation calls a method on UITableViewController when it's ready. If I retain the UITableViewController, I guarantee it's there, but I'm not sure if I'm leaking memory. If I only use an assign property, edge cases occur where the UITableViewController gets dealloc'd and objc_msgSend() gets called on an object that doesn't exist in memory and a crash is imminent.

  Read the article

• ObjectiveC - Releasing objects added as parameters

  - by NobleK

  Ok, here goes. Being a Java developer I'm still struggling with the memory management in ObjectiveC. I have all the basics covered, but once in a while I encounter a challenge. What I want to do is something which in Java would look like this: MyObject myObject = new MyObject(new MyParameterObject()); The constructor of MyObject class takes a parameter of type MyParameterObject which I initiate on-the-fly. In ObjectiveC I tried to do this using following code: MyObject *myObject = [[MyObject alloc] init:[[MyParameterObject alloc] init]]; However, running the Build and Analyze tool this gives me a "Potential leak of an object" warning for the MyParameter object which indeed occurs when I test it using Instruments. I do understand why this happens since I am taking ownership of the object with the alloc method and not relinquishing it, I just don't know the correct way of doing it. I tried using MyObject *myObject = [[MyObject alloc] init:[[[MyParameterObject alloc] init] autorelease]]; but then the Analyze tool told me that "Object sent -autorelease too many times". I could solve the issue by modifying the init method of MyParameterObject to say return [self autorelease]; in stead of just return self;. Analyze still warnes about a potential leak, but it doesn't actually occur. However I believe that this approach violates the convention for managing memory in ObjectiveC and I really want to do it the right way. Thanx in advance.

  Read the article

• C when to allocate and free memory - before function call, after function call...etc

  - by Keith P

  I am working with my first straight C project, and it has been a while since I worked on C++ for that matter. So the whole memory management is a bit fuzzy. I have a function that I created that will validate some input. In the simple sample below, it just ignores spaces: int validate_input(const char *input_line, char* out_value){ int ret_val = 0; /*false*/ int length = strlen(input_line); cout << "length = " << length << "\n"; out_value =(char*) malloc(sizeof(char) * length + 1); if (0 != length){ int number_found = 0; for (int x = 0; x < length; x++){ if (input_line[x] != ' '){ /*ignore space*/ /*get the character*/ out_value[number_found] = input_line[x]; number_found++; /*increment counter*/ } } out_value[number_found + 1] = '\0'; ret_val = 1; } return ret_val; } Instead of allocating memory inside the function for out_value, should I do it before I call the function and always expect the caller to allocate memory before passing into the function? As a rule of thumb, should any memory allocated inside of a function be always freed before the function returns?

  Read the article

• MemoryFailPoint fires to early in WinXP 64

  - by msedi

  Hello, I have created a volume class (called VoxelVolume) with a self-organizing memory management, since the GC in C# didn't provide a good mechanism for managing contents of the volume for mapping, unmapping and remapping. Although I could have used the mechanisms of virtual memory, the problem is that the files are often too large to fit into the page file and I don't want to force the users to increase the pagefile size. Currently this system is working quite well and there is no problem in lacking resources and OutOfMemoryExceptions since the InsufficientMemoryException using the MemoryFailPoint works quite well. This was all testes on a 32bit WinXP system with 2GB of main memory. Running the same mechanism on 64bit system with 32GB of main memory also works well, but when the application runs the MemoryFailPoint suddenly throws an exception although 24GB of main memory are still free. Another point is when the MemoryFailPoint has fired once, it fires everytime and there is no chance to get rid of it. What I have read so far, that there is a small object and a large object heap (SOH and LOH). But only for the SOH the GC takes real care of and I can free the SOH from unused objects by applying GC.Collect() and GC.WaitForPendingFinalizers. The MemoryFailPoint is obviously the only way to get a little bit of control for the LOH, but since there is enough memory left on the system I see no reason why the MemoryFilePoint should fire. Is there any experience around here using the MemoryFailPoint? Thank you for your help Martin

  Read the article

• How safe and reliable are C++ String Literals?

  - by DoctorT

  So, I'm wanting to get a better grasp on how string literals in C++ work. I'm mostly concerned with situations where you're assigning the address of a string literal to a pointer, and passing it around. For example: char* advice = "Don't stick your hands in the toaster."; Now lets say I just pass this string around by copying pointers for the duration of the program. Sure, it's probably not a good idea, but I'm curious what would actually be going on behind the scenes. For another example, let's say we make a function that returns a string literal: char* foo() { // function does does stuff return "Yikes!"; // somebody's feeble attempt at an error message } Now lets say this function is called very often, and the string literal is only used about half the time it's called: // situation #1: it's just randomly called without heed to the return value foo(); // situation #2: the returned string is kept and used for who knows how long char* retVal = foo(); In the first situation, what's actually happening? Is the string just created but not used, and never deallocated? In the second situation, is the string going to be maintained as long as the user finds need for it? What happens when it isn't needed anymore... will that memory be freed up then (assuming nothing points to that space anymore)? Don't get me wrong, I'm not planning on using string literals like this. I'm planning on using a container to keep my strings in check (probably std::string). I'm mostly just wanting to know if these situations could cause problems either for memory management or corrupted data.

  Read the article

• Creating C++ client app for some abstract windows server - how to manage TCP connection to server speed?

  - by Kabumbus

  So we have some server with some address port and ip. we are developing that server so we can implement on it what ever we need for help. What are standard/best practices for data transfer speed management between C++ windows client app and server (C++)? My main point is in how to get how much data can be uploaded/downloaded from/to client via his low speed network to my relatively super fast server. (I need it for set up of his live stream Audio/Video bit rate) My try on explaining number 3. We do not care how fast is our server. It is always faster than needed. We care about client tyring to stream out to our server his media. he streams encoded (via ffmpeg) live video data to our server. But he has say ADSL with 500kb/s of outgoing traffic. Also he uses some ICQ or what so ever so he has less than 500 kb/s per second. And he wants to stream live video! So we need to set up our ffmpeg to encode video with respect to the bit rate user can provide. We develop server side and client side. We need a way of finding out how much user can upload per second currently (so value can change dynamically over time)

  Read the article

• Information about PTE's (Page Table Entries) in Windows

  - by Patrick

  In order to find more easily buffer overflows I am changing our custom memory allocator so that it allocates a full 4KB page instead of only the wanted number of bytes. Then I change the page protection and size so that if the caller writes before or after its allocated piece of memory, the application immediately crashes. Problem is that although I have enough memory, the application never starts up completely because it runs out of memory. This has two causes: since every allocation needs 4 KB, we probably reach the 2 GB limit very soon. This problem could be solved if I would make a 64-bit executable (didn't try it yet). even when I only need a few hundreds of megabytes, the allocations fail at a certain moment. The second problem is the biggest one, and I think it's related to the maximum number of PTE's (page table entries, which store information on how Virtual Memory is mapped to physical memory, and whether pages should be read-only or not) you can have in a process. My questions (or a cry-for-tips): Where can I find information about the maximum number of PTE's in a process? Is this different (higher) for 64-bit systems/applications or not? Can the number of PTE's be configured in the application or in Windows? Thanks, Patrick PS. note for those who will try to argument that you shouldn't write your own memory manager: My application is rather specific so I really want full control over memory management (can't give any more details) Last week we had a memory overwrite which we couldn't find using the standard C++ allocator and the debugging functionality of the C/C++ run time (it only said "block corrupt" minutes after the actual corruption") We also tried standard Windows utilities (like GFLAGS, ...) but they slowed down the application by a factor of 100, and couldn't find the exact position of the overwrite either We also tried the "Full Page Heap" functionality of Application Verifier, but then the application doesn't start up either (probably also running out of PTE's)

  Read the article

• Objective C: Function returning correct data for the first time of call and null for other times

  - by Kooshal Bhungy

  Hi all, Am a beginner in objective C, i am implementing a function that would query a web server and display the returning string in console. I am calling the function (getDatafromServer) repeatedly in a loop. The problem is that the first time am getting the value whereas the other times, it returns me a (null) in console... I've searched about memory management and check out on the forums but none have worked. Can you please guys tell me where am wrong in the codes below? Thanks in advance.... @implementation RequestThread +(void)startthread:(id)param{ while (true) { //NSLog(@"Test threads"); sleep(5); NSLog(@"%@",[self getDatafromServer]); } } +(NSString *) getDatafromServer{ NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; NSString *myRequestString = @"name=Hello%20&[email protected]"; NSData *myRequestData = [NSData dataWithBytes:[myRequestString UTF8String] length:[myRequestString length]]; NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL: [NSURL URLWithString:@"http://192.168.1.32/gs/includes/widget/getcalls.php?user=asdasd&passw=asdasdasd"]]; [request setHTTPMethod:@"POST"]; [request setHTTPBody: myRequestData]; [request setValue:@"application/x-www-form-urlencoded" forHTTPHeaderField:@"content-type"]; NSData *returnData = [NSURLConnection sendSynchronousRequest:request returningResponse:nil error:nil]; NSString *myString = [NSString stringWithUTF8String:[returnData bytes]]; [myRequestString release]; [request release]; [returnData release]; return myString; [pool release]; } @end

  Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >