Search Results

Search found 4453 results on 179 pages for 'kernel parametes'.

Page 155/179 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• VMWare Workstation Linux Host performance tuning

  - by Hoghweed

  I need to improve my linux hosted vmware workstation for using multiple virtual machines at the same time. I feel very stupid I lost a great blog post link which I found last month (and I'm not able to find it again..) so I try to ask here if anyone can help me: This is my host (laptop): 16GB DDR3 Ram HDD Hybrid 750GB 7200 (8GB SSD Cache) Mint 15 x64 Kernel 3.9.7 swappiness set to 10 The above are the important things about the host. So, My need is the ability to run 2 or 3 VMs at the same time. The lack of performance is about the disk, The last time from that blog post I lost, I setup /tmp to be mounted ad a memory partition and in my previous installation that was good, now I'm not able to find a good solution to tweak the things. I think with 16GB o RAM there will be no problems to run multiple VMs, but whe they start to swap or use the /tmp things going bad (guest cursor going too fast after a freeze, guest freeze and so on) Anyone can help me to fit a good host tweak and configuration to get better performance? Thanks in advance

  Read the article

• Why am I unable to reach local network computers, but able to browse the web?

  - by Igor Zinov'yev

  I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

  Read the article

• Unable to compile netmap on Fedora 32 bit

  - by John Elf

  This is the error everytime I try to install netmap: Can someone let me know how to isntall the same on e1000e or ixgbe. I have kernel header and source installed. [root@localhost e1000]# make KSRC=/usr/src/kernels/2.6.35.6-45.fc14.i686/ make -C /usr/src/kernels/2.6.35.6-45.fc14.i686/ M=/media/sf_Shared/netmap-linux/net/e1000 modules make[1]: Entering directory /usr/src/kernels/2.6.35.6-45.fc14.i686' CC [M] /media/sf_Shared/netmap-linux/net/e1000/e1000_main.o /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_setup_tx_resources’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1485:2: error: implicit declaration of function ‘vzalloc’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1485:20: warning: assignment makes pointer from integer without a cast /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_setup_rx_resources’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1680:20: warning: assignment makes pointer from integer without a cast /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_tx_csum’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:2780:2: error: implicit declaration of function ‘skb_checksum_start_offset’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_rx_checksum’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:3689:2: error: implicit declaration of function ‘skb_checksum_none_assert’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_restore_vlan’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:4617:23: error: ‘VLAN_N_VID’ undeclared (first use in this function) /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:4617:23: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [/media/sf_Shared/netmap-linux/net/e1000/e1000_main.o] Error 1 make[1]: *** [_module_/media/sf_Shared/netmap-linux/net/e1000] Error 2 make[1]: Leaving directory/usr/src/kernels/2.6.35.6-45.fc14.i686' make: * [all] Error 2

  Read the article

• Can Xen be configured to dedicate only one port of a dual-port NIC to a domU?

  - by jamieb

  I'm using CentOS 5.4 on my dom0 with a stock Xen kernel. I'm attempting to use the pciback module to hide some of the Ethernet ports from the host and reserve them for a domU I intend to use for a firewall (process described here). However, when I launch the domU, I get the following error message: Using config file "/etc/xen/firewall". Error: pci: improper device assignment specified: pci: 0000:01:04.0 must be co-assigned to the same guest with 0000:01:06.0, but it is not owned by pciback. lspci gives me the following output: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) From the sound of the error message, it seems like I also need to dedicate eth0 (PCI ID 01:04.0) to the domU. Am I correct? If not, what am I doing wrong? Thanks!

  Read the article

• Change OpenVZ route to pass through ip failover

  - by Kevin Campion

  I have one dedicaced server with its own IP and another IP (failover) who refer to the first. I will wish to change the gateway of a Proxmox virtual machine (openvz) who runs on this dedicaced server to go through the failover IP rather than the ip of host main server. Once connected to a virtual machine, when I do a traceroute VE# traceroute www.google.fr traceroute to www.google.fr (209.85.229.104), 30 hops max, 60 byte packets 1 MY_SERVER_NAME.ovh.net (xxx.xxx.xxx.xxx FIRST_IP_MAIN_SERVER) 0.021 ms 0.010 ms 0.009 ms The first line tells me the ip of host main server. I would like that the traceroute display the second IP failover. VE# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 * 255.255.255.255 UH 0 0 0 venet0 default 192.0.2.1 0.0.0.0 UG 0 0 0 venet0 With iptables HOST# iptables -t nat -L Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere MASQUERADE all -- anywhere anywhere SNAT tcp -- anywhere 10.10.101.2 tcp dpt:www state NEW,RELATED,ESTABLISHED,UNTRACKED to:SECOND_IP_FAILOVER SNAT all -- 10.10.101.2 anywhere to:SECOND_IP_FAILOVER 10.10.101.2 is the virtual machine IP (interface venet0) Any ideas ?

  Read the article

• AMD Fusion GPU passthrough to KVM or Xen

  - by BigChief

  Has anyone successfully gotten a passthrough working with the GPU portion of AMD's Fusion APUs (the E-350 is my target) on top of a Linux hypervisor? IE, I want to dedicate the GPU to one VM only, excluding all other VMs as well as the host. I know PCI passthrough can work with patches / kernel rebuilds for Xen and KVM. However, since the GPU is on the same chip, I don't know if the host OS will see it as PCI. I know there are a number of tangential issues here, such as: Poor Fusion drivers in Linux at the moment Unsuccessful patching efforts seem common VT-d / IOMMU is required and (from my reading) is supported on the APU, but the motherboard may not offer it KVM doesn't appear to support primary graphics cards, only secondary graphics cards (described here) However, I'd like to hear from anyone who has messed with this, even failed attempts. Fedora + KVM is my preferred virtualization platform but I'm willing to change that if it makes a difference. EDIT: The goal is to do this for a Windows 7 guest (I know it's asking a lot). Regardless, just assume this is HVM, not PV.

  Read the article

• How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

  - by Todd V. Rovito

  I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

  Read the article

• FreeBSD ZFS RAID-Z2 performance issues

  - by Axel Gneiting

  I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

  Read the article

• Speakers silent, headphones work in Ubuntu 9.04

  - by CarlF

  I'm running Ubuntu 9.04. Worked fine for months, then I rebooted yesterday after weeks of continuous operation. Now audio won't play through the speakers. The USB headset works fine, but the Conexant audio (CX20549) does not. Weirdly, it thinks it's playing. pavumeter shows appropriate levels, volume looks OK in alsamixer, but no sound. I did find this page: http://www.eugeneteplitsky.com/fixing-silent-pulseaudio-in-ubuntu-9-04/ Unfortunately the advice there doesn't help me. For one thing, the syntax for the alsa-base.conf file is apparently not actually documented anywhere. For another, my chipset isn't listed in the kernel.org docs he links to! EDIT: would upgrading to 9.10 help? Is there a major change in the audio subsystem between 9.04 and 9.10? Any suggestions? EDIT 2: This is stranger than I thought. Sound works normally in Xine, but is silent in Audacity, VLC and mplayer. What the?

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• /dev/input/uinput Device appears to be 'broken'

  - by Adam Luchjenbroers

  I'm trying to setup Pystromo so that I can remap the keys on my Belkin N52TE gamepad. Pystromo basically captures the key strokes and then outputs the remapped keystrokes to the uinput device. However, at the moment it simply swallows the input and outputs absolutely nothing. I've tracked the issue to something being wrong with my uinput device, with the smoking gun being: # ls -l /dev/input/uinput crw-rw---- 1 root plugdev 10, 223 Dec 31 2009 /dev/input/uinput # cat /dev/input/uinput cat: /dev/input/uinput: No such device The uinput module is loaded, and can be clearly seen via lsmod. Anyone seen this before, or can think of something worth attempting? Current Setup Gentoo Linux Kernel 2.6.32 (Gentoo Sources 2.6.32-r1) HP DV7 Laptop Output dmesg dmesg | grep uinput does nothing, and no new lines appear if I run modprobe -r uinput && modprobe uinput. Yet the uinput module can clearly be seen when running lsmod: # lsmod | grep uinput uinput 6200 0 lsusb # lsusb Bus 005 Device 003: ID 050d:0200 Belkin Components Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1532:0101 Razer USA, Ltd Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 5986:0143 Acer, Inc Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module] Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb -v PasteBin Update Hmm, updating evdev and hal seems to have partially fixed it. /dev/input/uinput still can't be accessed but Pystromo is now remapping keys successfully. I'm a little bit mystified about what's going on here, but it seems that my understanding of how all this works is flawed. Since I've posted a bounty, I'll leave this here for someone to post an explanation for how user-space input devices work under the hood.

  Read the article

• iptables, blocking large numbers of IP Addresses

  - by Twirrim

  I'm looking to block IP addresses in a relatively automated fashion if they look to be 'screen scraping' content from websites that we host. In the past this was achieved by some ingenious perl scripts and OpenBSD's pf. pf is great in that you can provide it nice tables of IP addresses and it will efficiently handle blocking based on them. However for various reasons (before my time) they made the decision to switch to CentOS. iptables doesn't natively provide the ability to block large numbers of addresses (I'm told it wasn't unusual to be blocking 5000+), and I'm a bit cautious over adding that many rules into an iptable. ipt_recent would be awesome for doing this, plus it provides a lot of flexibility for just severely slowing down access, but there is a bug in the CentOS kernel that is stopping me from using it (reported, but awaiting fix). Using ipset would entail compiling a more up-to-date version of iptables than comes with CentOS which whilst I'm perfectly capable of doing it, I'd rather not do from a patching, security and consistency perspective. Other than those two it looks like nfblock is a reasonable alternative. Is anyone aware of other ways of achieving this? Are my concerns about several thousand IP addresses in iptables as individual rules unfounded?

  Read the article

• Best way to execute a command after Linux system halt

  - by Lukas Loesche

  Problem: The SSDs in our servers require a power cycle (i.e. off/on, not reset/warm reboot) after a firmware update. Thoughts: Using 'ipmitool chassis power cycle' I can cycle the server's power. However this would cut the power while the system is still running, filesystems are mounted, etc. What I basically want is a delayed power cycle so the system has a change to halt. But I guess that would have to be implemented on the server's IPMI board, so it's not really an option. My initial idea was to dynamically create a ramdisk containing the tool and libs and somehow integrate that into the halt process. I saw there's a /etc/init.d/halt, so that would be my starting point. Although I believe the kernel at some point in the shutdown process starts to kill off remaining processes. So I'm not even sure if that's a viable way. Question: What would be the best way to execute ipmitool (or any other command), after the system has halted and all regular filesystems are unmounted?

  Read the article

• OpenWRT + OpenVPN client forwarding from lan to vpn not working

  - by Dariusz Górecki

  I've OpenWRT router with Backfire 10.03.1-rc3 (arch:brcm 2.6 kernel) I've set up an OpenVPN client connecting my router with workplace lan, and it works nicely, I can connect from router to networks (several) in workplace. My OpenVPN client uci-config looks like: config 'openvpn' 'stream_client' option 'nobind' '1' option 'float' '1' option 'client' '1' option 'reneg_sec' '0' option 'management' '127.0.0.1 31194' option 'explicit_exit_notify' '1' option 'verb' '3' option 'persist_tun' '1' option 'persist_key' '1' list 'remote' 'remote.address.cutted' option 'ca' '/lib/uci/upload/cbid.openvpn.stream_client.ca' option 'key' '/lib/uci/upload/cbid.openvpn.stream_client.key' option 'cert' '/lib/uci/upload/cbid.openvpn.stream_client.cert' option 'enable' '1' option 'dev' 'tun1' I've set the 'STREAM_VPN' Zone to allow in/out traffic, and I've added rules for zone-to-zone lan<-vpn and vpn<-lan config 'zone' option 'name' 'stream_vpn' option 'network' 'stream_vpn' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'forwarding' option 'src' 'lan' option 'dest' 'stream_vpn' config 'forwarding' option 'src' 'stream_vpn' option 'dest' 'lan' And interface config: config 'interface' 'stream_vpn' option 'proto' 'none' option 'ifname' 'tun1' option 'defaultroute' '0' option 'peerdns' '0' Now, from my router everything works nicely, the problem is that I cannot connect from computer inside a lan to hosts in networks provided by vpn connection :/ What I've missed, or what I'm doing wrong? And how can I force using specified DNS when connected to vpn? (I know that sever should use PUSH DNS option, but is PUSHes only routes)

  Read the article

• Being a more attractive job candidate - Certs XOR Degree

  - by Zephyr Pellerin

  I'm currently working in an IT position, where I do helpdesk stuff, and predominantly security related issues/consulting (In the loosest sense of the term) In-House and for Service-Contract clients (as the only/acting CCSP [I guess I should say only person with Cisco experience] in my organization). I've professionally written Kernel Mode drivers for a gaming company. Among other things that I'm proud to put on a resume. I think of myself as very reasonably qualified as a System Administrator, With excellent Cisco experience, among other things I think would make a good addition to almost any IT staff in need of a new employee. However, Something has always tripped me up - Human Resources. Let me explain, I decided to skip the university route - I'm immensely glad that I did, The computer science graduates that I've met and work with rarely know much of anything about Computers (Until they gain some 'real' experience), Even when asked about Theoretical Computing fundamentals they can rattle something off about Turing Completeness but rarely do they understand the mathematical underpinnings. In short, I think instead of going to college, I'd rather pick up some real world experience. However, Apparently, Employers rarely think the same way. A quick perusal of jobs through the standard job search engine yields nothing short of a conspiracy to exclude anyone without 'A Bachelors Degree in Computer Science or Equivalent'. Interviews I've had in the past have almost always been entangled with - 1. My Age (Which I can't really change) and 2. Lack of Degree. Employers frequently disregard the CCNA/CCSP, The experience I've gained through internships, My extensive experience in x86 assembly and C, among so many other things I like to think are valuable to employers - In lieu of the fact that I don't have a piece of paper. So, AS AN EMPLOYER - Is it even worth working on my CCIE? Or should I pad my resume with certifications that are easier to acquire (Like CISSP, MSCE, Network+, etc.). Or should I ditch the whole idea and head back to get a Mathematics or CS degree?

  Read the article

• How to set up GRUB2 chainloader to other Grub (Fedora, Debian) on GPT

  - by basic6

  I'm trying to set up a dedicated GRUB2 which (chain-)loads another GRUB on a disk with GPT partition table. Relevant partitions: /dev/sda1 BIOS_BOOT /dev/sda2 BOOT (ext2) /dev/sda3 FEDORA (ext4) /dev/sda6 DEBIAN (ext4) I installed Fedora first, using /dev/sda2 as boot partition. Then I installed Debian. The Debian installer recognized the Fedora installation and added it as boot entry, then installed its GRUB into the MBR. While this works for the moment, it's pretty messy, because every Debian update may change the boot config, removing the Fedora entry (tried it) and the other way around. That's why I want both systems to have their own boot loader and one main boot loader (that could reside on /dev/sda2), which loads one of them. This is what I've tried: Moved everything from /dev/sda2 to /dev/sda3/boot Removed /boot mount point in Fedora (so /dev/sda2 isn't used anymore) From a live Linux, installed GRUB2 to the MBR (grub-install --boot-directory=sda2 /dev/sda) Wrote a menu.lst: title Fedora root (hd0,2) chainloader +1 (Again, for Debian) Converted that to a grub.cfg script (grub-menu2cfg or something like that) When booting, actually got a GRUB2 menu with "Fedora" (and "Debian") When selecting any one of those: error: invalid signature Issued "grub-install /dev/sda6" (and ...sda3) from all kinds of live Linux systems, all of which failed with another error message (in the case of the Debian installer, without explanation at all) Added --force to the chainloader line, now it says "loading", then reboots Found douzens of howtos, none of which seem to work for me Since I get the self-made GRUB2 menu on bootup, I've at least successfully installed the first stage of GRUB, right? When trying to chainload, some signature is checked and seems to be wrong - how do I fix it? The boot menus (Fedora with its different Kernel versions and Debian with Debian and Fedora as well) are now on the system partitions (/dev/sda3, /dev/sda6), is there anything else to do on these partitions, so they can be chainloaded? Any help is greatly appreciated.

  Read the article

• Cannot install CentOS 6.5 using UEFI usb boot

  - by Vaindil

  I am trying to dual-boot CentOS 6.5 on my desktop that is currently running Windows 8.1. I have two storage devices: an SSD that has my Windows installation, and an HDD that has all of my data. Both are formatted using GPT, and Windows boots using UEFI. I used the CentOS 6.5 live DVD (CentOS-6.5-x86_64-LiveDVD.iso) to create an EFI-bootable flash drive (it does boot properly in EFI mode). I receive an error, however, when CentOS is booting (error is below). I have a 6.4 boot DVD which boots as expected, but it does not boot in UEFI mode and therefore doesn't play nicely with my Windows installation (I have no way to access it, even using rEFInd or any other similar tools). What do I need to do to get the device to boot properly in UEFI mode? Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-431.el6.x86_64 #1 Call Trace: [<ffffffff815271fa>] ? panic+0xa7/0x16f [<ffffffff81077622>] ? do_exit+0x862/0x870 [<ffffffff8118a865>] ? fput+0x25/0x30 [<ffffffff81077688>] ? do_group_exit+0x58/0xd0 [<ffffffff81077717>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b drm_kms_helper: panic occurred, switching back to text console

  Read the article

• Setting up Windows network on Xen

  - by samyboy

  I'm trying to install a Windows XP server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny currently hosting around 10 Linux virtual servers. Windows tells me I have a "limited connection". It can't get any DHCP response, nor access other hosts in the network Here is the Xen's client config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '1024' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' Server config (/etc/xen/xend-config.sxp) (network-script network-bridge) (network-script network-dummy) (vif-script vif-bridge) (dom0-min-mem 512) (dom0-cpus 0) (vnc-listen '0.0.0.0') Since I use Debian I had to create a link like this: /etc/xen/qemu-ifup - /etc/xen/scripts/qemu-ifup What did I do wrong? Please tell me if you want some more info (logs, etc)

  Read the article

• Process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

  - by Jamgold

  I noticed that my 10.6.6 box has some process sending out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response [INFO] Mon Jan 10 16:31:47 2011 Blocked outgoing ICMP packet (ICMP type 3) from 192.168.1.189 to 212.25.57.90 Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome.

  Read the article

• Computer hangs at boot screen with new RAID card

  - by shanethehat

  I am trying to build a new server around a Biostar TH61 motherboard and an Adaptec 6405E RAID controller card. The machine booted fine from USB before the RAID card and drives were installed. After installing, on the first boot the card was detected, but then started to spit out the following message every 10 seconds: Error: Controller Kernel Stopped Running << Press any key to continue ... Following the troubleshooting guide I unplugged everything, reseated the card, and reattached all the drives. This time the machine is sitting on the boot screen without any error messages and flashing a cursor, but after 15 minutes of this, nothing seems to be happening. Given that there are no error messages I'm hesitant to reboot again. Is it normal for a RAID card to sit without a status message when it firsts boots, maybe to initialise the drives or something? The current screen output looks a bit like this: Controller #00 found at PCI Slot:01, Bus:01, Dev:00, Func:00 Controller Model: Adaptec 6405E Firmware Version: 5.2-0[18512] Memory Size: 128MB Serial number: 111111111111111 SAS WWN: 50000D1104AE9180 _ Update: So after waiting 30 minutes I've rebooted back to the Kernal Stopped Running error. Maybe time to update the RAID BIOS.

  Read the article

• Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

  - by Patrick

  While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

  Read the article

• systemd: enabling cherokee service as a `unit file`

  - by Calvin Cheng

  So I am learning how to use systemd to initialize my services automatically on server reboot. So of course, I first make sure I have systemd and some optional systemd related packages installed. pacman -S systemd initscripts-systemd Installation seems to go well and checking, I can see that systemd and its dependency libsystemd are installed. And the optional package initscripts-systemd is also installed:- [root@li280-195 ~]# pacman -Ss systemd extra/libsystemd 44-5 [installed] systemd client libraries extra/systemd 44-5 [installed] system and service manager extra/systemd-sysvcompat 2-2 sysvinit compat symlinks for systemd community/initscripts-systemd 20120412-1 [installed] Arch specific systemd initialization/bootup scripts for systemd community/systemd-arch-units 20120412-2 Arch specific Systemd unit files Next, I ensure that systemd is loaded up when my server reboots, via grub in grub's /boot/grub/menu.lst file like this:- kernel /boot/vmlinuz root=/dev/xvda ro init=/bin/systemd Rebooting my server to check, all loads up well and I can check that systemd is operational via:- systemctl list-unit-files However, I don't see my cherokee initialization script (which is simply created at /etc/rc.d/cherokee when I installed cherokee earlier via pacman -S cherokee) being listed as one of my unit files. So the question is, how do I do that? How do I put my cherokee initialization script under systemd's control?

  Read the article

• GA 8KNXP Rev1.0: 4GB installed, only 3.5 recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4GB. The specs from the manual say: Maximum memory support: 4GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• 0% CPU in top for all processes, but load average > 1

  - by chrisdew

  On two different servers (with Ubuntu 12.04LTS AMD64) I have seen the following behaviour: op - 10:50:05 up 305 days, 21:17, 1 user, load average: 1.94, 2.52, 2.97 Tasks: 141 total, 2 running, 139 sleeping, 0 stopped, 0 zombie Cpu(s): 41.5%us, 6.5%sy, 0.0%ni, 51.8%id, 0.0%wa, 0.2%hi, 0.1%si, 0.0%st Mem: 8178432k total, 5753740k used, 2424692k free, 159480k buffers Swap: 15625208k total, 0k used, 15625208k free, 4905292k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 20 0 23928 2072 1216 S 0 0.0 0:56.42 init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:01.23 migration/0 4 root 20 0 0 0 0 S 0 0.0 2:39.82 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:02.99 migration/1 7 root 20 0 0 0 0 S 0 0.0 2:32.15 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root RT 0 0 0 0 S 0 0.0 0:11.67 migration/2 10 root 20 0 0 0 0 S 0 0.0 29:00.34 ksoftirqd/2 The server is working fine, but top shows all processes as using 0% CPU. A reboot fixed this on an earlier machine, but I haven't yet tried it on this one. I have tried top several times, and so am sure that I haven't accidentally pressed '<' or '' to sort by a different column. Sorting the process list by all of the available columns, stills shows 0% CPU for all displayed processes. What is going on? If this a kernel bug? Update: If I use top -p <PID> for a know, busy process, top still displays 0% CPU for that process.

  Read the article

• Some process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

  - by Jamgold

  I noticed that my 10.6.6 box has some process send out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome. Thanks in advance

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >