Search Results

Search found 4453 results on 179 pages for 'kernel parametes'.

Page 162/179 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

  • No audio with headphones, but audio works with integrated speakers

    - by Pedro
    My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

    Read the article

  • Installation problem Ubuntu 12.04 Crashing hardware error

    - by user93640
    I am running on Ubuntu 8.04 for quite some time without many problems. About almost a year ago or so I have been trying to upgrade to 10.04 LTS, but without any success. Each time when trying to upgrade or even newly install the installation process crashed after about an hour or so (I forgot exactly how long). Now I wanted to try Ubuntu 12.04 (not even installing, but I only selected "Try Ubuntu without installing") and I got similar errors. I did not try to install it, because of earlier experience with 10.04 when after I also lost 8.04 and had to install from scratch again (after which it worked). I get the following screen (as I am not allowed to upload photos here the text): 26.767262] [Hardware Error]: CPU 0: Machine Check Exception: 0 Bank 5: b200001804000e0f 26.767279] [Hardware Error]: TSC 0 26.767287] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 0 microcode 44 26.767297] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767307] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 1: b200000000000175 26.767316] [Hardware Error]: TSC 0 26.767323] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767331] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767339] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 5: b200003000000e0f 26.767348] [Hardware Error]: TSC 0 26.767354] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767363] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767371] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 1: b200000000000175 26.767379] [Hardware Error]: TSC 1bf231e65f 26.767386] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767395] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767403] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 5: b200003008000e0f 26.767413] [Hardware Error]: TSC 1bf231e65f 26.767421] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767429] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767437] [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 5: b200001806000e0f 26.767447] [Hardware Error]: RIP |INEXACT| 60:<00000000c1018b5c> {mwait_idle+0x7c/0x1d0} 26.767464] [Hardware Error]: TSC 1bf231e674 26.767471] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 0 microcode 44 26.767480] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767487] [Hardware Error]: Machine check: Processor context corrupt 26.767495] Kernel panic - not syncing: Fatal Machine check 26.767505] Pid: 579, comm: debconf-communi Tainted: G M 3.2.0.29-generic-pae #46-Ubuntu 26.767515] Call Trace: 26.767525] [<c158f812>] ? printk+0x2d/0x2f 26.767534] [<c158f6e0>] panic+0x5c/0x161 26.767542] [<c10247ef>] mce_panic.part.14+0x13f/0x170 26.767551] [<c1024872>] mce_panic+0x52/0x90 26.767558] [<c1024a18>] mce_reign+0x168/0x170 26.767565] [<c1024bb5>] mce_end+0x105/0x110 26.767572] [<c10252db>] do_machine_check+0x32b/0x4f0 26.767581] [<c1024fb0>] ? mce_log+0x120/0x120 26.767590] [<c15a5e47>] error_code+0x67/0x6c 26.767602] panic occurred, switching back to text console 26.768498] Rebooting in 30 seconds.. For information, I have also tried earlier Arch Linux. I can install it, but when I try to install a window manager (LXDE) again I got similar errors. Fedora also crashes when installing and also Mandriva did not work for me. Therefore I think something deep in the machine might be wrong. But as stated above I can (clean) install 8.04 and also 9.10 can be installed without problems. Also updates for 8.04 can be installed. My machine is dual boot with XP next to it on a different partition. My HW: Memory : 2.0 GiB; Processor 0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; Processor 1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; How can I install Ubuntu 12.04? Last option would be to completely format my machine and install everything from scratch, but even I am not sure if that would solve it in the end. Can anybody help me out?

    Read the article

  • career in Mobile sw/Application Development [closed]

    - by pramod
    i m planning to do a course on Wireless & mobile computing.The syllabus are given below.Please check & let me know whether its worth to do.How is the job prospects after that.I m a fresher & from electronic Engg.The modules are- *Wireless and Mobile Computing (WiMC) – Modules* C, C++ Programming and Data Structures 100 Hours C Revision C, C++ programming tools on linux(Vi editor, gdb etc.) OOP concepts Programming constructs Functions Access Specifiers Classes and Objects Overloading Inheritance Polymorphism Templates Data Structures in C++ Arrays, stacks, Queues, Linked Lists( Singly, Doubly, Circular) Trees, Threaded trees, AVL Trees Graphs, Sorting (bubble, Quick, Heap , Merge) System Development Methodology 18 Hours Software life cycle and various life cycle models Project Management Software: A Process Various Phases in s/w Development Risk Analysis and Management Software Quality Assurance Introduction to Coding Standards Software Project Management Testing Strategies and Tactics Project Management and Introduction to Risk Management Java Programming 110 Hours Data Types, Operators and Language Constructs Classes and Objects, Inner Classes and Inheritance Inheritance Interface and Package Exceptions Threads Java.lang Java.util Java.awt Java.io Java.applet Java.swing XML, XSL, DTD Java n/w programming Introduction to servlet Mobile and Wireless Technologies 30 Hours Basics of Wireless Technologies Cellular Communication: Single cell systems, multi-cell systems, frequency reuse, analog cellular systems, digital cellular systems GSM standard: Mobile Station, BTS, BSC, MSC, SMS sever, call processing and protocols CDMA standard: spread spectrum technologies, 2.5G and 3G Systems: HSCSD, GPRS, W-CDMA/UMTS,3GPP and international roaming, Multimedia services CDMA based cellular mobile communication systems Wireless Personal Area Networks: Bluetooth, IEEE 802.11a/b/g standards Mobile Handset Device Interfacing: Data Cables, IrDA, Bluetooth, Touch- Screen Interfacing Wireless Security, Telemetry Java Wireless Programming and Applications Development(J2ME) 100 Hours J2ME Architecture The CLDC and the KVM Tools and Development Process Classification of CLDC Target Devices CLDC Collections API CLDC Streams Model MIDlets MIDlet Lifecycle MIDP Programming MIDP Event Architecture High-Level Event Handling Low-Level Event Handling The CLDC Streams Model The CLDC Networking Package The MIDP Implementation Introduction to WAP, WML Script and XHTML Introduction to Multimedia Messaging Services (MMS) Symbian Programming 60 Hours Symbian OS basics Symbian OS services Symbian OS organization GUI approaches ROM building Debugging Hardware abstraction Base porting Symbian OS reference design porting File systems Overview of Symbian OS Development – DevKits, CustKits and SDKs CodeWarrior Tool Application & UI Development Client Server Framework ECOM STDLIB in Symbian iPhone Programming 80 Hours Introducing iPhone core specifications Understanding iPhone input and output Designing web pages for the iPhone Capturing iPhone events Introducing the webkit CSS transforms transitions and animations Using iUI for web apps Using Canvas for web apps Building web apps with Dashcode Writing Dashcode programs Debugging iPhone web pages SDK programming for web developers An introduction to object-oriented programming Introducing the iPhone OS Using Xcode and Interface builder Programming with the SDK Toolkit OS Concepts & Linux Programming 60 Hours Operating System Concepts What is an OS? Processes Scheduling & Synchronization Memory management Virtual Memory and Paging Linux Architecture Programming in Linux Linux Shell Programming Writing Device Drivers Configuring and Building GNU Cross-tool chain Configuring and Compiling Linux Virtual File System Porting Linux on Target Hardware WinCE.NET and Database Technology 80 Hours Execution Process in .NET Environment Language Interoperability Assemblies Need of C# Operators Namespaces & Assemblies Arrays Preprocessors Delegates and Events Boxing and Unboxing Regular Expression Collections Multithreading Programming Memory Management Exceptions Handling Win Forms Working with database ASP .NET Server Controls and client-side scripts ASP .NET Web Server Controls Validation Controls Principles of database management Need of RDBMS etc Client/Server Computing RDBMS Technologies Codd’s Rules Data Models Normalization Techniques ER Diagrams Data Flow Diagrams Database recovery & backup SQL Android Application 80 Hours Introduction of android Why develop for android Android SDK features Creating android activities Fundamental android UI design Intents, adapters, dialogs Android Technique for saving data Data base in Androids Maps, Geocoding, Location based services Toast, using alarms, Instant messaging Using blue tooth Using Telephony Introducing sensor manager Managing network and wi-fi connection Advanced androids development Linux kernel security Implement AIDL Interface. Project 120 Hours

    Read the article

  • Dual Screen will only mirror after 12.04 upgrade

    - by Ne0
    I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

    Read the article

  • 12.04 installation started to black screen during boot today

    - by Cedric
    NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

    Read the article

  • initrd.lz is corrupted error occured while installing 11.10

    - by zubendra
    C:\ubuntu\install\boot\initrd.lz is corrupted. Error pop-up comes up every time i am trying to install ubuntu-11.10-desktop-i386 using wubi. error comes when the installation process is almost completed. can anyone suggest a solution for this problem. Its occurring regularly. 03-19 18:01 DEBUG TaskList: ## Running copy_installation_files... 03-19 18:01 DEBUG WindowsBackend: Copying C:\DOCUME~1\HP_OWN~1.YOU\LOCALS~1\Temp\pyl59.tmp\data\custom-installation -> C:\ubuntu\install\custom-installation 03-19 18:01 DEBUG WindowsBackend: Copying C:\DOCUME~1\HP_OWN~1.YOU\LOCALS~1\Temp\pyl59.tmp\winboot -> C:\ubuntu\winboot 03-19 18:01 DEBUG WindowsBackend: Copying C:\DOCUME~1\HP_OWN~1.YOU\LOCALS~1\Temp\pyl59.tmp\data\images\Ubuntu.ico -> C:\ubuntu\Ubuntu.ico 03-19 18:01 DEBUG TaskList: ## Finished copy_installation_files 03-19 18:01 DEBUG TaskList: ## Running get_iso... 03-19 18:01 DEBUG CommonBackend: Trying to use pre-specified ISO X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG TaskList: New task is_valid_iso 03-19 18:01 DEBUG TaskList: ### Running is_valid_iso... 03-19 18:01 DEBUG Distro: checking Ubuntu ISO X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 INFO Distro: Found a valid iso for Ubuntu: X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG TaskList: ### Finished is_valid_iso 03-19 18:01 DEBUG TaskList: New task check_iso 03-19 18:01 DEBUG TaskList: ### Running check_iso... 03-19 18:01 DEBUG CommonBackend: Checking X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG Distro: checking Ubuntu ISO X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 INFO Distro: Found a valid iso for Ubuntu: X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG CommonBackend: Using distro Ubuntu i386 instead of Ubuntu amd64 03-19 18:01 DEBUG TaskList: New task get_metalink 03-19 18:01 DEBUG TaskList: #### Running get_metalink... 03-19 18:01 DEBUG downloader: downloading http://releases.ubuntu.com/11.10/ubuntu-11.10-desktop-i386.metalink > C:\ubuntu\install 03-19 18:01 ERROR CommonBackend: Cannot download metalink file http://releases.ubuntu.com/11.10/ubuntu-11.10-desktop-i386.metalink err=[Errno 4] IOError: <urlopen error (7, 'getaddrinfo failed')> 03-19 18:01 DEBUG downloader: downloading http://cdimage.ubuntu.com/daily-live/current/oneiric-desktop-i386.metalink > C:\ubuntu\install 03-19 18:01 ERROR CommonBackend: Cannot download metalink file2 http://cdimage.ubuntu.com/daily-live/current/oneiric-desktop-i386.metalink err=[Errno 4] IOError: <urlopen error (7, 'getaddrinfo failed')> 03-19 18:01 DEBUG TaskList: #### Finished get_metalink 03-19 18:01 ERROR CommonBackend: ERROR: the metalink file is not available, cannot check the md5 for X:\ubuntu-11.10-desktop-i386.iso, ignoring 03-19 18:01 DEBUG TaskList: ### Finished check_iso 03-19 18:01 DEBUG TaskList: New task copy_file 03-19 18:01 DEBUG CommonBackend: Copying X:\ubuntu-11.10-desktop-i386.iso > C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG TaskList: ### Running copy_file... 03-19 18:01 DEBUG TaskList: ### Finished copy_file 03-19 18:01 DEBUG TaskList: ## Finished get_iso 03-19 18:01 DEBUG TaskList: ## Running extract_kernel... 03-19 18:01 DEBUG CommonBackend: Extracting files from ISO C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG WindowsBackend: extracting md5sum.txt from C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG WindowsBackend: extracting casper\vmlinuz from C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG WindowsBackend: extracting casper\initrd.lz from C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG CommonBackend: Checking kernel, initrd and md5sums 03-19 18:01 DEBUG CommonBackend: checking C:\ubuntu\install\boot\vmlinuz 03-19 18:01 DEBUG CommonBackend: C:\ubuntu\install\boot\vmlinuz md5 = fde150f5c6fd2de66ed7876efbfcc4c7 == fde150f5c6fd2de66ed7876efbfcc4c7 03-19 18:01 DEBUG CommonBackend: checking C:\ubuntu\install\boot\initrd.lz 03-19 18:01 DEBUG CommonBackend: C:\ubuntu\install\boot\initrd.lz md5 = 8900200c764438c1b124dff5ae92c763 != d6baee1e11f1d6de6eba6bd43dbde352 03-19 18:01 ERROR TaskList: File C:\ubuntu\install\boot\initrd.lz is corrupted Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 623, in extract_kernel Exception: File C:\ubuntu\install\boot\initrd.lz is corrupted 03-19 18:01 DEBUG TaskList: # Cancelling tasklist 03-19 18:01 ERROR root: File C:\ubuntu\install\boot\initrd.lz is corrupted Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 623, in extract_kernel Exception: File C:\ubuntu\install\boot\initrd.lz is corrupted 03-19 18:01 DEBUG TaskList: # Finished tasklist

    Read the article

  • Ruby 1.9.3 segmentation fault on rackspace

    - by user531065
    I'm having a similar problem as "ruby 1.9 segmentation fault on exit." I followed the solution and updated libselinux with yum and have the following version installed: Package libselinux-2.0.96-6.fc14.1.x86_64 already installed and latest version I am running a RackSpace machine, kernel version: 2.6.35.4-rscloud. My C backtrace is: -- C level backtrace information ------------------------------------------- /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x18910a) [0x7f3cdb6c010a] vm_dump.c:796 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x5eb04) [0x7f3cdb595b04] error.c:258 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_bug+0xb8) [0x7f3cdb5969d8] error.c:277 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x119865) [0x7f3cdb650865] signal.c:609 /lib64/libpthread.so.0() [0x328540eeb0] /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x179272) [0x7f3cdb6b0272] ./include/ruby/ruby.h:1306 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x17f31b) [0x7f3cdb6b631b] vm.c:1220 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1800d5) [0x7f3cdb6b70d5] vm.c:624 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_yield+0x44) [0x7f3cdb6bb274] vm.c:654 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0xab821) [0x7f3cdb5e2821] numeric.c:3204 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x183601) [0x7f3cdb6ba601] vm_insnhelper.c:404 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1792b4) [0x7f3cdb6b02b4] insns.def:1015 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x17f31b) [0x7f3cdb6b631b] vm.c:1220 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1800d5) [0x7f3cdb6b70d5] vm.c:624 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_yield+0x44) [0x7f3cdb6bb274] vm.c:654 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_ary_each+0x54) [0x7f3cdb5622e4] array.c:1478 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x183601) [0x7f3cdb6ba601] vm_insnhelper.c:404 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1792b4) [0x7f3cdb6b02b4] insns.def:1015 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x17f31b) [0x7f3cdb6b631b] vm.c:1220 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_iseq_eval+0x1f0) [0x7f3cdb6bbae0] vm.c:1447 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x67bfd) [0x7f3cdb59ebfd] load.c:310 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_require_safe+0x6ef) [0x7f3cdb5a02df] load.c:619 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x183601) [0x7f3cdb6ba601] vm_insnhelper.c:404 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1792b4) [0x7f3cdb6b02b4] insns.def:1015 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x17f31b) [0x7f3cdb6b631b] vm.c:1220 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1800d5) [0x7f3cdb6b70d5] vm.c:624 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_yield+0x44) [0x7f3cdb6bb274] vm.c:654 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_ary_each+0x54) [0x7f3cdb5622e4] array.c:1478 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x183601) [0x7f3cdb6ba601] vm_insnhelper.c:404 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x1792b4) [0x7f3cdb6b02b4] insns.def:1015 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x17f31b) [0x7f3cdb6b631b] vm.c:1220 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(rb_iseq_eval_main+0xaf) [0x7f3cdb6bbbdf] vm.c:1461 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(+0x6471a) [0x7f3cdb59b71a] eval.c:204 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(ruby_exec_node+0x1d) [0x7f3cdb59c56d] eval.c:251 /usr/local/rvm/rubies/ruby-1.9.3-p0/lib/libruby.so.1.9(ruby_run_node+0x1e) [0x7f3cdb59e60e] eval.c:244 ruby() [0x4008eb] /lib64/libc.so.6(__libc_start_main+0xfd) [0x3284c1ee5d] ruby() [0x4007d9]

    Read the article

  • IPsec tunnel to Android device not created even though there is an IKE SA

    - by Quentin Swain
    I'm trying to configure a VPN tunnel between an Android device running 4.1 and a Fedora 17 Linux box running strongSwan 5.0. The device reports that it is connected and strongSwan statusall returns that there is an IKE SA, but doesn't display a tunnel. I used the instructions for iOS in the wiki to generate certificates and configure strongSwan. Since Android uses a modified version of racoon this should work and since the connection is partly established I think I am on the right track. I don't see any errors about not being able to create the tunnel. This is the configuration for the strongSwan connection conn android2 keyexchange=ikev1 authby=xauthrsasig xauth=server left=96.244.142.28 leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=%any rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem ike=aes256-sha1-modp1024 auto=add This is the output of strongswan statusall Status of IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64): uptime: 20 minutes, since Oct 31 10:27:31 2012 malloc: sbrk 270336, mmap 0, used 198144, free 72192 worker threads: 8 of 16 idle, 7/1/0/0 working, job queue: 0/0/0/0, scheduled: 7 loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic Virtual IP pools (size/online/offline): android-hybrid: 1/0/0 android2: 1/1/0 Listening IP addresses: 96.244.142.28 Connections: android-hybrid: %any...%any IKEv1 android-hybrid: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android-hybrid: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android-hybrid: remote: [%any] uses XAuth authentication: any android-hybrid: child: dynamic === dynamic TUNNEL android2: 96.244.142.28...%any IKEv1 android2: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android2: remote: [C=CH, O=strongSwan, CN=client] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=client" android2: remote: [%any] uses XAuth authentication: any android2: child: 0.0.0.0/0 === 10.0.0.0/24 TUNNEL Security Associations (1 up, 0 connecting): android2[3]: ESTABLISHED 10 seconds ago, 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] android2[3]: Remote XAuth identity: android android2[3]: IKEv1 SPIs: 4151e371ad46b20d_i 59a56390d74792d2_r*, public key reauthentication in 56 minutes android2[3]: IKE proposal: AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 The output of ip -s xfrm policy src ::/0 dst ::/0 uid 0 socket in action allow index 3851 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3844 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket in action allow index 3835 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3828 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3819 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:39 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3812 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:22 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3803 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3796 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 So a xfrm policy isn't being created for the connection, even though there is an SA between device and strongswan. Executing ip -s xfrm policy on the android device results in the following output: src 0.0.0.0/0 dst 10.0.0.2/32 uid 0 dir in action allow index 40 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 96.244.142.28 dst 25.239.33.30 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 10.0.0.2/32 dst 0.0.0.0/0 uid 0 dir out action allow index 33 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 25.239.33.30 dst 96.244.142.28 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 28 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 19 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 12 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:06 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 3 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:07 Logs from charon: 00[DMN] Starting IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64) 00[KNL] listening on interfaces: 00[KNL] em1 00[KNL] 96.244.142.28 00[KNL] fe80::224:e8ff:fed2:18b2 00[CFG] loading ca certificates from '/etc/strongswan/ipsec.d/cacerts' 00[CFG] loaded ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" from '/etc/strongswan/ipsec.d/cacerts/caCert.pem' 00[CFG] loading aa certificates from '/etc/strongswan/ipsec.d/aacerts' 00[CFG] loading ocsp signer certificates from '/etc/strongswan/ipsec.d/ocspcerts' 00[CFG] loading attribute certificates from '/etc/strongswan/ipsec.d/acerts' 00[CFG] loading crls from '/etc/strongswan/ipsec.d/crls' 00[CFG] loading secrets from '/etc/strongswan/ipsec.secrets' 00[CFG] loaded RSA private key from '/etc/strongswan/ipsec.d/private/clientKey.pem' 00[CFG] loaded IKE secret for %any 00[CFG] loaded EAP secret for android 00[CFG] loaded EAP secret for android 00[DMN] loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic 08[NET] waiting for data on sockets 16[LIB] created thread 16 [15338] 16[JOB] started worker thread 16 11[CFG] received stroke: add connection 'android-hybrid' 11[CFG] conn android-hybrid 11[CFG] left=%any 11[CFG] leftsubnet=(null) 11[CFG] leftsourceip=(null) 11[CFG] leftauth=pubkey 11[CFG] leftauth2=(null) 11[CFG] leftid=(null) 11[CFG] leftid2=(null) 11[CFG] leftrsakey=(null) 11[CFG] leftcert=serverCert.pem 11[CFG] leftcert2=(null) 11[CFG] leftca=(null) 11[CFG] leftca2=(null) 11[CFG] leftgroups=(null) 11[CFG] leftupdown=ipsec _updown iptables 11[CFG] right=%any 11[CFG] rightsubnet=(null) 11[CFG] rightsourceip=96.244.142.3 11[CFG] rightauth=xauth 11[CFG] rightauth2=(null) 11[CFG] rightid=%any 11[CFG] rightid2=(null) 11[CFG] rightrsakey=(null) 11[CFG] rightcert=(null) 11[CFG] rightcert2=(null) 11[CFG] rightca=(null) 11[CFG] rightca2=(null) 11[CFG] rightgroups=(null) 11[CFG] rightupdown=(null) 11[CFG] eap_identity=(null) 11[CFG] aaa_identity=(null) 11[CFG] xauth_identity=(null) 11[CFG] ike=aes256-sha1-modp1024 11[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 11[CFG] dpddelay=30 11[CFG] dpdtimeout=150 11[CFG] dpdaction=0 11[CFG] closeaction=0 11[CFG] mediation=no 11[CFG] mediated_by=(null) 11[CFG] me_peerid=(null) 11[CFG] keyexchange=ikev1 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[CFG] left nor right host is our side, assuming left=local 11[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 11[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 11[CFG] added configuration 'android-hybrid' 11[CFG] adding virtual IP address pool 'android-hybrid': 96.244.142.3/32 13[CFG] received stroke: add connection 'android2' 13[CFG] conn android2 13[CFG] left=96.244.142.28 13[CFG] leftsubnet=0.0.0.0/0 13[CFG] leftsourceip=(null) 13[CFG] leftauth=pubkey 13[CFG] leftauth2=(null) 13[CFG] leftid=(null) 13[CFG] leftid2=(null) 13[CFG] leftrsakey=(null) 13[CFG] leftcert=serverCert.pem 13[CFG] leftcert2=(null) 13[CFG] leftca=(null) 13[CFG] leftca2=(null) 13[CFG] leftgroups=(null) 13[CFG] leftupdown=ipsec _updown iptables 13[CFG] right=%any 13[CFG] rightsubnet=10.0.0.0/24 13[CFG] rightsourceip=10.0.0.2 13[CFG] rightauth=pubkey 13[CFG] rightauth2=xauth 13[CFG] rightid=(null) 13[CFG] rightid2=(null) 13[CFG] rightrsakey=(null) 13[CFG] rightcert=clientCert.pem 13[CFG] rightcert2=(null) 13[CFG] rightca=(null) 13[CFG] rightca2=(null) 13[CFG] rightgroups=(null) 13[CFG] rightupdown=(null) 13[CFG] eap_identity=(null) 13[CFG] aaa_identity=(null) 13[CFG] xauth_identity=(null) 13[CFG] ike=aes256-sha1-modp1024 13[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 13[CFG] dpddelay=30 13[CFG] dpdtimeout=150 13[CFG] dpdaction=0 13[CFG] closeaction=0 13[CFG] mediation=no 13[CFG] mediated_by=(null) 13[CFG] me_peerid=(null) 13[CFG] keyexchange=ikev0 13[KNL] getting interface name for %any 13[KNL] %any is not a local address 13[KNL] getting interface name for 96.244.142.28 13[KNL] 96.244.142.28 is on interface em1 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 13[CFG] id '96.244.142.28' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=client" from 'clientCert.pem' 13[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=client' 13[CFG] added configuration 'android2' 13[CFG] adding virtual IP address pool 'android2': 10.0.0.2/32 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 15[CFG] looking for an ike config for 96.244.142.28...208.54.35.241 15[CFG] candidate: %any...%any, prio 2 15[CFG] candidate: 96.244.142.28...%any, prio 5 15[CFG] found matching ike config: 96.244.142.28...%any with prio 5 01[JOB] next event in 29s 999ms, waiting 15[IKE] received NAT-T (RFC 3947) vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02 vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02\n vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-00 vendor ID 15[IKE] received XAuth vendor ID 15[IKE] received Cisco Unity vendor ID 15[IKE] received DPD vendor ID 15[IKE] 208.54.35.241 is initiating a Main Mode IKE_SA 15[IKE] IKE_SA (unnamed)[1] state change: CREATED => CONNECTING 15[CFG] selecting proposal: 15[CFG] proposal matches 15[CFG] received proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_256/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:AES_CBC_128/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:3DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024 15[CFG] configured proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/AES_CBC_192/AES_CBC_256/3DES_CBC/CAMELLIA_CBC_128/CAMELLIA_CBC_192/CAMELLIA_CBC_256/HMAC_MD5_96/HMAC_SHA1_96/HMAC_SHA2_256_128/HMAC_SHA2_384_192/HMAC_SHA2_512_256/AES_XCBC_96/AES_CMAC_96/PRF_HMAC_MD5/PRF_HMAC_SHA1/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/MODP_2048/MODP_2048_224/MODP_2048_256/MODP_1536/MODP_4096/MODP_8192/MODP_1024/MODP_1024_160 15[CFG] selected proposal: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 15[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 15[MGR] checkin IKE_SA (unnamed)[1] 15[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 08[NET] waiting for data on sockets 07[MGR] checkout IKE_SA by message 07[MGR] IKE_SA (unnamed)[1] successfully checked out 07[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 07[LIB] size of DH secret exponent: 1023 bits 07[IKE] remote host is behind NAT 07[IKE] sending cert request for "C=CH, O=strongSwan, CN=strongSwan CA" 07[ENC] generating NAT_D_V1 payload finished 07[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 07[MGR] checkin IKE_SA (unnamed)[1] 07[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 10[IKE] ignoring certificate request without data 10[IKE] received end entity cert "C=CH, O=strongSwan, CN=client" 10[CFG] looking for XAuthInitRSA peer configs matching 96.244.142.28...208.54.35.241[C=CH, O=strongSwan, CN=client] 10[CFG] candidate "android-hybrid", match: 1/1/2/2 (me/other/ike/version) 10[CFG] candidate "android2", match: 1/20/5/1 (me/other/ike/version) 10[CFG] selected peer config "android2" 10[CFG] certificate "C=CH, O=strongSwan, CN=client" key: 2048 bit RSA 10[CFG] using trusted ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" 10[CFG] checking certificate status of "C=CH, O=strongSwan, CN=client" 10[CFG] ocsp check skipped, no ocsp found 10[CFG] certificate status is not available 10[CFG] certificate "C=CH, O=strongSwan, CN=strongSwan CA" key: 2048 bit RSA 10[CFG] reached self-signed root ca with a path length of 0 10[CFG] using trusted certificate "C=CH, O=strongSwan, CN=client" 10[IKE] authentication of 'C=CH, O=strongSwan, CN=client' with RSA successful 10[ENC] added payload of type ID_V1 to message 10[ENC] added payload of type SIGNATURE_V1 to message 10[IKE] authentication of 'C=CH, O=strongSwan, CN=vpn.strongswan.org' (myself) successful 10[IKE] queueing XAUTH task 10[IKE] sending end entity cert "C=CH, O=strongSwan, CN=vpn.strongswan.org" 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 10[IKE] activating new tasks 10[IKE] activating XAUTH task 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 01[JOB] next event in 3s 999ms, waiting 10[MGR] checkin IKE_SA android2[1] 10[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 12[MGR] checkout IKE_SA by message 12[MGR] IKE_SA android2[1] successfully checked out 12[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 12[MGR] checkin IKE_SA android2[1] 12[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 16[MGR] checkout IKE_SA by message 16[MGR] IKE_SA android2[1] successfully checked out 16[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 16[IKE] XAuth authentication of 'android' successful 16[IKE] reinitiating already active tasks 16[IKE] XAUTH task 16[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 16[MGR] checkin IKE_SA android2[1] 01[JOB] next event in 3s 907ms, waiting 16[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 09[MGR] checkout IKE_SA by message 09[MGR] IKE_SA android2[1] successfully checked out 09[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] .8rS 09[IKE] IKE_SA android2[1] established between 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] 09[IKE] IKE_SA android2[1] state change: CONNECTING => ESTABLISHED 09[IKE] scheduling reauthentication in 3409s 09[IKE] maximum IKE_SA lifetime 3589s 09[IKE] activating new tasks 09[IKE] nothing to initiate 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 09[MGR] checkout IKE_SA 09[MGR] IKE_SA android2[1] successfully checked out 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 01[JOB] next event in 3s 854ms, waiting 08[NET] waiting for data on sockets 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[MGR] checkout IKE_SA by message 14[MGR] IKE_SA android2[1] successfully checked out 14[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[IKE] processing INTERNAL_IP4_ADDRESS attribute 14[IKE] processing INTERNAL_IP4_NETMASK attribute 14[IKE] processing INTERNAL_IP4_DNS attribute 14[IKE] processing INTERNAL_IP4_NBNS attribute 14[IKE] processing UNITY_BANNER attribute 14[IKE] processing UNITY_DEF_DOMAIN attribute 14[IKE] processing UNITY_SPLITDNS_NAME attribute 14[IKE] processing UNITY_SPLIT_INCLUDE attribute 14[IKE] processing UNITY_LOCAL_LAN attribute 14[IKE] processing APPLICATION_VERSION attribute 14[IKE] peer requested virtual IP %any 14[CFG] assigning new lease to 'android' 14[IKE] assigning virtual IP 10.0.0.2 to peer 'android' 14[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 14[MGR] checkin IKE_SA android2[1] 14[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 08[NET] waiting for data on sockets 01[JOB] got event, queuing job for execution 01[JOB] next event in 91ms, waiting 13[MGR] checkout IKE_SA 13[MGR] IKE_SA android2[1] successfully checked out 13[MGR] checkin IKE_SA android2[1] 13[MGR] check-in of IKE_SA successful. 01[JOB] got event, queuing job for execution 01[JOB] next event in 24s 136ms, waiting 15[MGR] checkout IKE_SA 15[MGR] IKE_SA android2[1] successfully checked out 15[MGR] checkin IKE_SA android2[1] 15[MGR] check-in of IKE_SA successful.

    Read the article

  • LSI SAS 9240-8i on Ubuntu 12.04 Hangs on Modprobe

    - by Francois Stark
    I used the LSI 9240-8i card on a smaller Intel motherboard with no problems in Ubuntu, with ZFS. However, we rebuilt the server to allow for more disks, using the ASROCK X79 Extreme 11 motherboard. It has 7 PCIe slots, and a LSI 2008 on-board. At first I thought the LSI 9240, when plugged in to PCIe, clashed with the on-board LSI 2008. Every time I plugged in the LSI 9240, modprobe would hang. Then I completely disabled the on-board LSI 2008, and the problem persisted. Last night it booted perfectly ONCE - all LSI cards and connected disks visible... However, all subsequent reboots failed. Both LSI cards' bios scans appear and they both see the disks connected to them, but Ubuntu modprobe hangs. Some selected dmesg lines, with both LSI cards enabled: [ 190.752100] megasas: [ 0]waiting for 1 commands to complete [ 195.772071] megasas: [ 5]waiting for 1 commands to complete [ 200.792079] megasas: [10]waiting for 1 commands to complete [ 205.812078] megasas: [15]waiting for 1 commands to complete [ 210.832037] megasas: [20]waiting for 1 commands to complete [ 215.852077] megasas: [25]waiting for 1 commands to complete [ 220.872072] megasas: [30]waiting for 1 commands to complete [ 225.892078] megasas: [35]waiting for 1 commands to complete [ 230.912086] megasas: [40]waiting for 1 commands to complete [ 235.932075] megasas: [45]waiting for 1 commands to complete [ 240.306157] usb 2-1.5: USB disconnect, device number 7 [ 240.952076] megasas: [50]waiting for 1 commands to complete [ 240.960034] INFO: task modprobe:233 blocked for more than 120 seconds. [ 240.960055] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.960067] modprobe D ffffffff81806200 0 233 146 0x00000004 [ 240.960075] ffff880806ae3b48 0000000000000086 ffff880806ae3ae8 ffffffff8101adf3 [ 240.960083] ffff880806ae3fd8 ffff880806ae3fd8 ffff880806ae3fd8 0000000000013780 [ 240.960090] ffffffff81c0d020 ffff880806acae00 ffff880806ae3b58 ffff880808961720 [ 240.960096] Call Trace: [ 240.960107] [<ffffffff8101adf3>] ? native_sched_clock+0x13/0x80 [ 240.960116] [<ffffffff816579cf>] schedule+0x3f/0x60 [ 240.960137] [<ffffffffa00093f5>] megasas_issue_blocked_cmd+0x75/0xb0 [megaraid_sas] [ 240.960144] [<ffffffff8108aa50>] ? add_wait_queue+0x60/0x60 [ 240.960154] [<ffffffffa000a6c9>] megasas_get_seq_num+0xd9/0x260 [megaraid_sas] [ 240.960164] [<ffffffffa000ab31>] megasas_start_aen+0x31/0x60 [megaraid_sas] [ 240.960174] [<ffffffffa00136f1>] megasas_probe_one+0x69a/0x81c [megaraid_sas] [ 240.960182] [<ffffffff813345bc>] local_pci_probe+0x5c/0xd0 [ 240.960189] [<ffffffff81335e89>] __pci_device_probe+0xf9/0x100 [ 240.960197] [<ffffffff8130ce6a>] ? kobject_get+0x1a/0x30 [ 240.960205] [<ffffffff81335eca>] pci_device_probe+0x3a/0x60 [ 240.960212] [<ffffffff813f5278>] really_probe+0x68/0x190 [ 240.960217] [<ffffffff813f5505>] driver_probe_device+0x45/0x70 [ 240.960223] [<ffffffff813f55db>] __driver_attach+0xab/0xb0 [ 240.960227] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960233] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960237] [<ffffffff813f436c>] bus_for_each_dev+0x5c/0x90 [ 240.960243] [<ffffffff813f503e>] driver_attach+0x1e/0x20 [ 240.960248] [<ffffffff813f4c90>] bus_add_driver+0x1a0/0x270 [ 240.960255] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960260] [<ffffffff813f5b46>] driver_register+0x76/0x140 [ 240.960266] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960271] [<ffffffff81335b66>] __pci_register_driver+0x56/0xd0 [ 240.960277] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960286] [<ffffffffa001e09e>] megasas_init+0x9e/0x1000 [megaraid_sas] [ 240.960294] [<ffffffff81002040>] do_one_initcall+0x40/0x180 [ 240.960301] [<ffffffff810a82fe>] sys_init_module+0xbe/0x230 [ 240.960307] [<ffffffff81661ec2>] system_call_fastpath+0x16/0x1b [ 240.960314] INFO: task scsi_scan_7:349 blocked for more than 120 seconds.

    Read the article

  • Bose USB audio: crackling popping sound, eventually die

    - by Richard Barrett
    I've been trying to troubleshoot this issue for a while now. Any help would be much appreciated. I'm having trouble getting my Bose "Companion 5 multimedia speakers" working with my installation of Ubuntu 12.04 (link to Bose product here: http://www.bose.com/controller?url=/shop_online/digital_music_systems/computer_speakers/companion_5/index.jsp ). The issue seems to be low level (not just Ubuntu). What happens: When I boot into Ubuntu, I can get Rhythm box to play ok. However, if I try anything else (an .avi file, a webpage, or Clementine player with mp3 files) I get crackling, popping, or choppy sounds. If I move the mouse around, especially if it seems graphic intensive, the problem gets worse (more crackling noises). The more taxing it appears to be, the more likely it is that the sound will just die altogether until I reboot. For some reason the videos at www.bloomberg.com seem especially bad for it (my sound normally goes dead in under 45 seconds and won't work until reboot). Both my desktop running Ubuntu 12.04 and my laptop (running the same) have the same crackling problem. Troubleshooting so far: A friend of mine who knows linux well tried to solve it for me without any luck. He took pulseaudio out of the equation, but still had the problem just using AlSA. Among the many things he tried was adjusting the latency, but that didn't help either. I've also tried things like adjusting the USB device settings in the config file from -2 to -1 so that it will use my USB sound and I also commented out the lines that would stop that. These don't do anything. (That really seems like it's for someone who is getting no sound at all, so it's not surprising this won't work.) My friend's laptop running his Archlinux could play my Bose USB speakers without any problems. I also tried setting my daemon.conf file to use 6 channels (based on this http://lotphelp.com/lotp/configure-ubuntu-51-surround-sound ) but that didn't work either. I recently used a DVD to boot into Ubuntu Studio 12.04 (because it uses a live audio kernel) and this happened: I got perfect sound for a minute or two When I started moving windows around while sound was playing, the sound died again. Perhaps more interesting: There is a headphone out jack on the Bose system. When I use it, the audio is perfect for all applications (even the deadly bloomberg.com videos with .avi playing at the same time and moving around windows). Also, there is an audio-in jack on the Bose system. I can use a male-to-male mini jack to go from my soundcard's output to the Bose input and then all sound works perfectly. -However, it still requires the Bose to be plugged in to USB, otherwise I lose all sound. Any thoughts? Any suggestions for trouble shooting? (Or any suggestions for somewhere else to post to solve this?) Any logs or other files I can provide to help someone help me work this out? Your help is much appreciated! Rick BTW: I sometimes get people posting responses like "My Bose USB system works great with Ubuntu 12.04," without any more details. Is there anything I should ask such people to narrow down my problem? (It's kind of annoying to hear such a response because it doesn't help solve my problem.)

    Read the article

  • Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

    - by user72681
    When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

    Read the article

  • It's like I'm in recovery mode after update, but I'm not

    - by mawburn
    I used the Ubuntu software updater and updated to the most recent packages. After the last update today, it's like I have gone into recovery mode, but I haven't. I am running UbuntuGNOME First, everything looks like this: Switching to dark mode does nothing. Also, default applications do not work. Such as Startup and the default screenshot application. Everything was working fine before the latest software update. System Info Ubuntu 14.04 LTS Gnome-Shell 3.10.4 Kernel 3.13.0-29 I can't figure out how to get an update history, but this is almost a fresh install. It's about a week old install and this is the 3rd time I've used the Ubuntu Software Update. I am running AMD ATI HD6700 with the proprietary Catalyst drivers. I tried to provide all information that I thought would be useful, if you need any more please let me know. Edit - I believe something went wrong within these updates: Update Log: Start-Date: 2014-06-09 19:07:07 Commandline: aptdaemon role='role-commit-packages' sender=':1.68' Install: libgnome-desktop-3-10:amd64 (3.12.0-0~eugenesan~trusty2) Upgrade: gnome-session-common:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gnome-session-bin:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gir1.2-gnomedesktop-3.0:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), gnome-session:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), python-libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libspice-server1:amd64 (0.12.4-0nocelt2, 0.12.4-0nocelt2.02~eugenesan~trusty1), gir1.2-mutter-3.0:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), xserver-xorg-video-qxl:amd64 (0.1.1-0ubuntu3, 0.1.1-0ubuntu3.01), libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libxml2:i386 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), gnome-desktop3-data:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), mutter:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), mutter-common:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), libxml2-utils:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libmutter0c:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1) End-Date: 2014-06-09 19:07:12 I also installed Citrix Receiver today, following the tutorial here: Citrix Receiver 12.1 on Ubuntu 14.04 64-bit Log Start-Date: 2014-06-09 18:59:06 Commandline: apt-get install libmotif4:i386 nspluginwrapper lib32z1 libc6-i386 libxp6:i386 libxpm4:i386 libasound2:i386 Install: libmotif-common:amd64 (2.3.4-5, automatic), libatk1.0-0:i386 (2.10.0-2ubuntu2, automatic), libxft2:i386 (2.3.1-2, automatic), libgraphite2-3:i386 (1.2.4-1ubuntu1, automatic), nspluginviewer:i386 (1.4.4-0ubuntu5, automatic), libpango-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcursor1:i386 (1.1.14-1, automatic), libmotif4:i386 (2.3.4-5), libxm4:amd64 (2.3.4-5, automatic), libxm4:i386 (2.3.4-5, automatic), libxp6:i386 (1.0.2-1ubuntu1), libpangocairo-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcb-render0:i386 (1.10-2ubuntu1, automatic), libthai0:i386 (0.1.20-3, automatic), libharfbuzz0b:i386 (0.9.27-1, automatic), libpixman-1-0:i386 (0.30.2-2ubuntu1, automatic), libpangoft2-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libcairo2:i386 (1.13.0~20140204-0ubuntu1, automatic), lib32z1:amd64 (1.2.8.dfsg-1ubuntu1), libjasper1:i386 (1.900.1-14ubuntu3, automatic), libgtk2.0-0:i386 (2.24.23-0ubuntu1.1, automatic), nspluginwrapper:amd64 (1.4.4-0ubuntu5), libuil4:amd64 (2.3.4-5, automatic), libuil4:i386 (2.3.4-5, automatic), libxcb-shm0:i386 (1.10-2ubuntu1, automatic), libxmu6:i386 (1.1.1-1, automatic), libc6-i386:amd64 (2.19-0ubuntu6), libxinerama1:i386 (1.1.3-1, automatic), libgdk-pixbuf2.0-0:i386 (2.30.7-0ubuntu1, automatic), libxcomposite1:i386 (0.4.4-1, automatic), libmrm4:amd64 (2.3.4-5, automatic), libmrm4:i386 (2.3.4-5, automatic), libdatrie1:i386 (0.2.8-1, automatic), libxrandr2:i386 (1.4.2-1, automatic), libxpm4:i386 (3.5.10-1) End-Date: 2014-06-09 18:59:11

    Read the article

  • #OOW 2012: Big Data and The Social Revolution

    - by Eric Bezille
    As what was saying Cognizant CSO Malcolm Frank about the "Futur of Work", and how the Business should prepare in the face of the new generation  not only of devices and "internet of things" but also due to their users ("The Millennials"), moving from "consumers" to "prosumers" :  we are at a turning point today which is bringing us to the next IT Architecture Wave. So this is no more just about putting Big Data, Social Networks and Customer Experience (CxM) on top of old existing processes, it is about embracing the next curve, by identifying what processes need to be improve, but also and more importantly what processes are obsolete and need to be get ride of, and new processes put in place. It is about managing both the hierarchical and structured Enterprise and its social connections and influencers inside and outside of the Enterprise. And this does apply everywhere, up to the Utilities and Smart Grids, where it is no more just about delivering (faster) the same old 300 reports that have grown over time with those new technologies but to understand what need to be looked at, in real-time, down to an hand full relevant reports with the KPI relevant to the business. It is about how IT can anticipate the next wave, and is able to answers Business questions, and give those capabilities in real-time right at the hand of the decision makers... This is the turning curve, where IT is really moving from the past decade "Cost Center" to "Value for the Business", as Corporate Stakeholders will be able to touch the value directly at the tip of their fingers. It is all about making Data Driven Strategic decisions, encompassed and enriched by ALL the Data, and connected to customers/prosumers influencers. This brings to stakeholders the ability to make informed decisions on question like : “What would be the best Olympic Gold winner to represent my automotive brand ?”... in a few clicks and in real-time, based on social media analysis (twitter, Facebook, Google+...) and connections link to my Enterprise data. A true example demonstrated by Larry Ellison in real-time during his yesterday’s key notes, where “Hardware and Software Engineered to Work Together” is not only about extreme performances but also solutions that Business can touch thanks to well integrated Customer eXperience Management and Social Networking : bringing the capabilities to IT to move to the IT Architecture Next wave. An example, illustrated also todays in 2 others sessions, that I had the opportunity to attend. The first session bringing the “Internet of Things” in Oil&Gaz into actionable decisions thanks to Complex Event Processing capturing sensors data with the ready to run IT infrastructure leveraging Exalogic for the CEP side, Exadata for the enrich datasets and Exalytics to provide the informed decision interface up to end-user. The second session showing Real Time Decision engine in action for ACCOR hotels, with Eric Wyttynck, VP eCommerce, and his Technical Director Pascal Massenet. I have to close my post here, as I have to go to run our practical hands-on lab, cooked with Olivier Canonge, Christophe Pauliat and Simon Coter, illustrating in practice the Oracle Infrastructure Private Cloud recently announced last Sunday by Larry, and developed through many examples this morning by John Folwer. John also announced today Solaris 11.1 with a range of network innovation and virtualization at the OS level, as well as many optimizations for applications, like for Oracle RAC, with the introduction of the lock manager inside Solaris Kernel. Last but not least, he introduced Xsigo Datacenter Fabric for highly simplified networks and storage virtualization for your Cloud Infrastructure. Hoping you will get ready to jump on the next wave, we are here to help...

    Read the article

  • Tuning Default WorkManager - Advantages and Disadvantages

    - by Murali Veligeti
    Before discussing on Tuning Default WorkManager, lets have a brief introduction on What is Default WorkManger Before Weblogic Server 9.0 release, we had the concept of Execute Queues. WebLogic Server (before WLS 9.0), processing was performed in multiple execute queues. Different classes of work were executed in different queues, based on priority and ordering requirements, and to avoid deadlocks. In addition to the default execute queue, weblogic.kernel.default, there were pre-configured queues dedicated to internal administrative traffic, such as weblogic.admin.HTTP and weblogic.admin.RMI.Users could control thread usage by altering the number of threads in the default queue, or configure custom execute queues to ensure that particular applications had access to a fixed number of execute threads, regardless of overall system load. From WLS 9.0 release onwards WebLogic Server uses is a single thread pool (single thread pool which is called Default WorkManager), in which all types of work are executed. WebLogic Server prioritizes work based on rules you define, and run-time metrics, including the actual time it takes to execute a request and the rate at which requests are entering and leaving the pool.The common thread pool changes its size automatically to maximize throughput. The queue monitors throughput over time and based on history, determines whether to adjust the thread count. For example, if historical throughput statistics indicate that a higher thread count increased throughput, WebLogic increases the thread count. Similarly, if statistics indicate that fewer threads did not reduce throughput, WebLogic decreases the thread count. This new strategy makes it easier for administrators to allocate processing resources and manage performance, avoiding the effort and complexity involved in configuring, monitoring, and tuning custom executes queues. The Default WorkManager is used to handle thread management and perform self-tuning.This Work Manager is used by an application when no other Work Managers are specified in the application’s deployment descriptors. In many situations, the default Work Manager may be sufficient for most application requirements. WebLogic Server’s thread-handling algorithms assign each application its own fair share by default. Applications are given equal priority for threads and are prevented from monopolizing them. The default work-manager, as its name tells, is the work-manager defined by default.Thus, all applications deployed on WLS will use it. But sometimes, when your application is already in production, it's obvious you can't take your EAR / WAR, update the deployment descriptor(s) and redeploy it.The default work-manager belongs to a thread-pool, as initial thread-pool comes with only five threads, that's not much. If your application has to face a large number of hits, you may want to start with more than that.Well, that's quite easy. You have  two option to do so.1) Modify the config.xmlJust add the following line(s) in your server definition : <server> <name>AdminServer</name> <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min> <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max> [...] </server> 2) Adding some JVM parameters Add the following system property in setDomainEnv.sh/setDomainEnv.cmd or startWebLogic.sh/startWebLogic.cmd : -Dweblogic.threadpool.MinPoolSize=100 -Dweblogic.threadpool.MaxPoolSize=100 Reboot WLS and see the option has been taken into account . Disadvantage: So far its fine. But here there is an disadvantage in tuning Default WorkManager. Internally Weblogic Server has many work managers configured for different types of work.  if we run out of threads in the self-tuning pool(because of system property -Dweblogic.threadpool.MaxPoolSize) due to being undersized, then important work that WLS might need to do could be starved.  So, while limiting the self-tuning would limit the default WorkManager and internally it also limits all other internal WorkManagers which WLS uses.So the best alternative is to override the default WorkManager that means creating a WorkManager for the Application and assign the WorkManager for the application instead of tuning the Default WorkManager.

    Read the article

  • Resolve SRs Faster Using RDA - Find the Right Profile

    - by Daniel Mortimer
    Introduction Remote Diagnostic Agent (RDA) is an excellent command-line data collection tool that can aid troubleshooting / problem solving. The tool covers the majority of Oracle's vast product range, and its data collection capability is comprehensive. RDA collects data about the operating system and environment, including environment variable, kernel settings network o/s performance o/s patches and much more the Oracle Products installed, including patches logs and debug metrics configuration and much more In effect, RDA can obtain a snapshot of an Oracle Product and its environment. Oracle Support encourages the use of RDA because it greatly reduces service request resolution time by minimizing the number of requests from Oracle Support for more information. RDA is designed to be as unobtrusive as possible; it does not modify systems in any way. It collects useful data for Oracle Support only and a security filter is provided if required. Find and Use the Right RDA Profile One problem of any tool / utility, which covers a large range of products, is knowing how to target it against only the products you wish to troubleshoot. RDA does not have a GUI. Nor does RDA have an intelligent mechanism for detecting and automatically collecting data only for those Oracle products installed. Instead, you have to tell RDA what to do. There is a mind boggling large number of RDA data collection modules which you can configure RDA to use. It is easier, however, to setup RDA to use a "Profile". A profile consists of a list of data collection modules and predefined settings. As such profiles can be used to diagnose a problem with a particular product or combination of products. How to run RDA with a profile? ( <rda> represents the command you selected to run RDA (for example, rda.pl, rda.cmd, rda.sh, and perl rda.pl).) 1. Use the embedded spreadsheet to find the RDA profile which is appropriate for your problem / chosen Oracle Fusion Middleware products. 2. Use the following command to perform the setup <rda> -S -p <profile_name>  3. Run the data collection <rda> Run the data collection. If you want to perform setup and run in one go, then use a command such as the following: <rda> -vnSCRP -p <profile name> For more information, refer to: Remote Diagnostic Agent (RDA) 4 - Profile Manual Pages [ID 391983.1] Additional Hints / Tips: 1. Be careful! Profile names are case sensitive.2. When profiles are not used, RDA considers all existing modules by default. For example, if you have downloaded RDA for the first time and run the command <rda> -S you will see prompts for every RDA collection module many of which will be of no interest to you. Also, you may, in your haste to work through all the questions, forget to say "Yes" to the collection of data that is pertinent to your particular problem or product. Profiles avoid such tedium and help ensure the right data is collected at the first time of asking.

    Read the article

  • Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

    - by Mark
    I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

    Read the article

  • Graphical driver 13.10 ATI RV630

    - by Michael Cephalus
    I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

    Read the article

  • Oracle Solaris Crash Analysis Tool 5.3 now available

    - by user12609056
    Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3.  This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

    Read the article

  • Oracle support note for Leap Second Hang problem that may result into 100% CPU utilization in Linux environment

    - by Anand Akela
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} On or around July 1, 2012, Oracle has become aware of an issue on Linux distributions resulting from the introduction of the leap second; this is causing problems for some customers.  Leap seconds may be introduced at the end of June or December in a calendar year, like 2012, as necessary to maintain time standards. Servers hosting Oracle products which are clients of an NTP server (Network Time Protocol) may be particularly susceptible to this issue as the NTP server is updated. Linux distributions which may be affected include Oracle Enterprise Linux, Red Hat Enterprise Linux, Oracle VM and Oracle Unbreakable Enterprise Kernel. Asianux 2 and 3, based on RHEL 4 and 5, may also be affected. One report of correction to high agent CPU using Note 1472421.1 on SLES11 has also been reported. Not all customers will be affected, but those, who are affected, may observe higher than normal CPU consumption on their Linux environments where JVM's are utilized.  In Oracle Enterprise Manager ( EM ) , this problem can manifest itself as high CPU consumption with the EM Agent process (which runs on a JVM in EM 12c, for instance).  It is possible that the OMS is also affected. We would advise customers to review the description of this problem in MOS Note 1472651.1 and take action if they observe that their environment is affected. Contributed by Andrew Bulloch , Director, Application Systems Management Products

    Read the article

  • Wireless doesn't work on a Broadcom BCM4312

    - by Boderick
    As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • User password rejected on login screen but accepted on text console login

    - by MadsirR
    I had to force shutdown my Ubuntu 12.04 64-bit, after which I restarted and tried to log in as a normal user, which was rejected several times. I then logged in as guest and tty to my regular account with use of my normal password, which succeeded. (So the password is still valid.) How can I gain access again via the normal login procedure (welcome screen)? Update: When I tried to log on with my new password, it again was denied. When I deliberately tried to log on with a faulty password, an error message came back, saying: Access denied - wrong password. I suppose, the first time the password was not rejected, but the procedure was aborted for some reason. Some additional info after trying to find a solution: I am conviced it is a Compiz-issue. Why? before this happened, all sessions came to a grinding halt, regardless of being logged on in a 2D or 3d environment. I found a link saying that I should remove Compiz and proceed in a 2D environment, which initiall worked without a glitch, until my system went into a state of total obivium. Only after that, the above mentioned troubles appeared. In the meantime I have happened to find a thread with reference 17381, describing exactly what I have experienced. For now, I will try to cure this situation (later this week) and revert with the results, hopefully to close this post. In the meantime I cordially thank you all, even if you didn't kill the problem; you gave me the inspiration to look further and find a possible cure. Update2: After 15 hrs of trial-and-error I callled it quits (When I decided to tackle this problem, I've given myself 12 hrs, to avoid massive loss of time.) I decided to re-install Precise, since the "point 1" version has become availabe. Log-in is back to normal, as is the graphic environment. Response to mouse input is stil appalling, especially when I have a series of screens open as "children"of a "parent" screen. It still completely locks up. I have installed Enlightenment, Gnome classic, Gnome 3, Cinnamon and they all behave in a similar fashion. FOR THOSE WHO NEED A WAY-OUT IN SITUATIONS OF THE LIKE: Open a terminal with [Ctrl+Alt+F2]. Type [sudo killall Firefox] (or whatever application you wish to terminate). Key in your password. Return to your graphical screen with [Ctrl+Alt+F7], and Bob's your uncle. Just re-open Firefox like nothing happened. Next time you are stuck: [Ctrl+Alt+F2], upward arrow till you meet the command of your desire, [Ctrl+Alt+F7], etcetera. Hope this is of help. My next move will be to upgrade the kernel to 3.4 from the repositories for 12.10. However, since this entails a totally new situation, I will start a new thread on this site to avoid topic pollution I will keep you posted. Still.

    Read the article

  • How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

    - by Don Quixote
    I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

    Read the article

  • Using Appendbuffers in unity for terrain generation

    - by Wardy
    Like many others I figured I would try and make the most of the monster processing power of the GPU but I'm having trouble getting the basics in place. CPU code: using UnityEngine; using System.Collections; public class Test : MonoBehaviour { public ComputeShader Generator; public MeshTopology Topology; void OnEnable() { var computedMeshPoints = ComputeMesh(); CreateMeshFrom(computedMeshPoints); } private Vector3[] ComputeMesh() { var size = (32*32) * 4; // 4 points added for each x,z pos var buffer = new ComputeBuffer(size, 12, ComputeBufferType.Append); Generator.SetBuffer(0, "vertexBuffer", buffer); Generator.Dispatch(0, 1, 1, 1); var results = new Vector3[size]; buffer.GetData(results); buffer.Dispose(); return results; } private void CreateMeshFrom(Vector3[] generatedPoints) { var filter = GetComponent<MeshFilter>(); var renderer = GetComponent<MeshRenderer>(); if (generatedPoints.Length > 0) { var mesh = new Mesh { vertices = generatedPoints }; var colors = new Color[generatedPoints.Length]; var indices = new int[generatedPoints.Length]; //TODO: build this different based on topology of the mesh being generated for (int i = 0; i < indices.Length; i++) { indices[i] = i; colors[i] = Color.blue; } mesh.SetIndices(indices, Topology, 0); mesh.colors = colors; mesh.RecalculateNormals(); mesh.Optimize(); mesh.RecalculateBounds(); filter.sharedMesh = mesh; } else { filter.sharedMesh = null; } } } GPU code: #pragma kernel Generate AppendStructuredBuffer<float3> vertexBuffer : register(u0); void genVertsAt(uint2 xzPos) { //TODO: put some height generation code here. // could even run marching cubes / dual contouring code. float3 corner1 = float3( xzPos[0], 0, xzPos[1] ); float3 corner2 = float3( xzPos[0] + 1, 0, xzPos[1] ); float3 corner3 = float3( xzPos[0], 0, xzPos[1] + 1); float3 corner4 = float3( xzPos[0] + 1, 0, xzPos[1] + 1 ); vertexBuffer.Append(corner1); vertexBuffer.Append(corner2); vertexBuffer.Append(corner3); vertexBuffer.Append(corner4); } [numthreads(32, 1, 32)] void Generate (uint3 threadId : SV_GroupThreadID, uint3 groupId : SV_GroupID) { uint2 currentXZ = unint2( groupId.x * 32 + threadId.x, groupId.z * 32 + threadId.z); genVertsAt(currentXZ); } Can anyone explain why when I call "buffer.GetData(results);" on the CPU after the compute dispatch call my buffer is full of Vector3(0,0,0), I'm not expecting any y values yet but I would expect a bunch of thread indexes in the x,z values for the Vector3 array. I'm not getting any errors in any of this code which suggests it's correct syntax-wise but maybe the issue is a logical bug. Also: Yes, I know I'm generating 4,000 Vector3's and then basically round tripping them. However, the purpose of this code is purely to learn how round tripping works between CPU and GPU in Unity.

    Read the article

  • X server with nvidia driver crashing: 12.04

    - by Raster
    My X server consistently crashes. It seems like this is happening when the X server is idle. This behaviour is new with 12.04. This is only happening on the second display of a multiseat system. Is there a configuration change I can make to stop this? X.Org X Server 1.11.3 Release Date: 2011-12-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu Current Operating System: Linux Desktop 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-29-generic root=/dev/mapper/Group1-Root ro ramdisk_size=512000 quiet splash vt.handoff=7 Build Date: 04 August 2012 01:51:23AM xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.1.log", Time: Sun Sep 2 22:37:06 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fcee86be846] 1: /usr/bin/X (0x7fcee8536000+0x18c6ea) [0x7fcee86c26ea] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fcee785c000+0xfcb0) [0x7fcee786bcb0] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x902a9) [0x7fcee154a2a9] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0xfd5e7) [0x7fcee15b75e7] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d6b92) [0x7fcee1990b92] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d74d5) [0x7fcee19914d5] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d767d) [0x7fcee199167d] 8: /usr/bin/X (0x7fcee8536000+0x1196ec) [0x7fcee864f6ec] 9: /usr/bin/X (0x7fcee8536000+0xe8ad5) [0x7fcee861ead5] 10: /usr/bin/X (0x7fcee8536000+0xe9d45) [0x7fcee861fd45] /etc/X11/xorg.conf Section "ServerLayout" Identifier "Desktop" Screen 0 "DesktopScreen" 0 0 InputDevice "DesktopMouse" "CorePointer" InputDevice "DesktopKeyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "ServerLayout" Identifier "Desktop2" Screen 1 "Desktop2Screen" 0 0 InputDevice "Desktop2Mouse" "CorePointer" InputDevice "Desktop2Keyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "Files" EndSection Section "ServerFlags" Option "AutoAddDevices" "false" Option "AutoEnableDevices" "false" Option "AllowMouseOpenFail" "on" Option "AllowEmptyInput" "on" Option "ZapWarning" "on" Option "HandleSepcialKeys" "off" # Zapping on Option "DRI2" "on" Option "Xinerama" "0" EndSection # Desktop Mouse Section "InputDevice" Identifier "DesktopMouse" Driver "evdev" Option "Device" "/dev/input/event3" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection # Desktop2 Mouse Section "InputDevice" Identifier "Desktop2Mouse" Driver "evdev" Option "Device" "/dev/input/event5" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "DesktopKeyboard" Driver "evdev" Option "Device" "/dev/input/event4" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "InputDevice" Identifier "Desktop2Keyboard" Driver "evdev" Option "Device" "/dev/input/event6" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "Monitor" Identifier "Desktop2Monitor" VendorName "Acer" ModelName "Acer G235H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "DesktopMonitor" VendorName "Acer" ModelName "Acer H213H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "EVGACard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" Option "Coolbits" "1" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "XFXCard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 9800" Option "Coolbits" "1" BusID "PCI:5:0:0" Screen 0 EndSection Section "Screen" Identifier "DesktopScreen" Device "EVGACard" Monitor "DesktopMonitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Desktop2Screen" Device "XFXCard" Monitor "Desktop2Monitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • broken upgrade from 10.04 to 12.04 on a VPS - recoverable?

    - by HorusKol
    I have a VPS hosted 1500 km away. It originally came with 9.10 - and this morning I decided that I really should get to an LTS release, and figured I'd jump to 12.04. Researching, I discovered that there is no direct path between 9.10 and 12.04, but that I could upgrade via 10.04. After backing up my data, I dove in. The upgrade to 10.04 was successful, and I proceeded to upgrade to 12.04. Things started to go wrong. First, I got an error with GLIBC - I retried and got the same error. That's when I stopped the upgrade. I then tried another round of apt-get update && apt-get upgrade and got a list of "unmet dependencies": apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed I tried to see if I could do something about these - using apt-get -f install. This told me that I would need to upgrade my kernel. I found instructions on how to do this, but when I ran apt-get to install the new linux headers, I got the same dependency errors. I found another answer here where someone else had had an interruption in their upgrade - and tried the solution that worked for them: sudo apt-get -f dist-upgrade This resulted in the error: E: Could not perform immediate configuration on 'python2.7-minimal'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) I tried to resolve this by: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal But this simply ended up with this last list of dependency errors: apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed python: Depends: python-minimal (= 2.6.5-0ubuntu1) but 2.7.3-0ubuntu2 is to be installed python-apt: Depends: libapt-pkg-libc6.10-6-4.8 python-minimal: Depends: python2.7-minimal (>= 2.7.3) but it is not going to be installed Breaks: python-support (< 1.0.10ubuntu2) but 1.0.4ubuntu1 is to be installed synaptic: Depends: libapt-pkg-libc6.10-6-4.8 Any ideas on how to dig out of this hole?

    Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >