Search Results

Search found 22903 results on 917 pages for 'network namespace'.

Page 155/917 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • Connecting my XBOX 360 to home network

    - by patrick
    I am trying to set up my XBOX 360 as a Windows Media Center Extender. I input the code as shown on the XBOX screen, but I get the error message: "Cannot Set Up Extender." This means that the Extender was found (there's a separate error msg for extender not found), however it can't be set up. Windows points me to this page which tells me to change my router settings to enable multicast and UPnP. My router doesn't have those specific settings but I did open all ports for the XBOX. What is odd about this problem is that it did work, then I restarted my computer and didn't change any settings, and now it doesn't work. I guess something did change, but I can't figure out anything else to try after opening all ports. I'm running Windows 7 and the router is fairly recent (I bought it about six months ago) so it should be able to handle this. The router firmware is up to date.

    Read the article

  • trying to connect to non-standard port over esxi guest network

    - by user52874
    I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

    Read the article

  • mapping server 2008 network drive to vista home premium x64

    - by rboorgapally
    Hi, We have a windows server 2008 box at my work place. I want to map a drive from the server to my laptop. I use windows vista home premium x64. I am connected to my workplace through VPN. i can map the drive when I use the administrator account on the server. But the log on is unsuccessful if I use my personal account on the server to map the drive. My personal account on the server is part of Administrators group. Can any one help me with this?

    Read the article

  • Prioritize One Network Share Over Another And/Or Cap Network Share Traffic? (Windows Server 2008 R2 Enterprise)

    - by FullTimeCoderPartTimeSysAdmin
    One of my fileservers is a hyper v VM running Windows Server 2008 R2 Enterprise. The NIC in the VM maps to a 1 GB NIC on the host that is dedicated just to this VM. I have two shares on the file server. One is very important and used by a few users. The other is less important but used by many users. The issue I'm having: When a ton of users are accessing the unimportant share, it can choke out requests to the important share. What I'd like to do: I'd like to some prioritize requests for for file on the more important share, or even dedicate a portion of the NIC's bandwidth just to requests for files on that share. Is there any way to do that? Alternately, can I add another NIC and specify that all traffic to one share goes over one NIC and traffic to the other share goes over the other?

    Read the article

  • One network, two macbooks, one is fast and the other is slow

    - by Brendan
    I really need help for my friend. I know next to nothing about computers. My roommate and I both have macbook pros from the same year running OS X, are both connecting wirelessly to the same xfinity wifi, and while mine runs perfectly fine, my roommate complains that his works very slowly and times out every few seconds. I can't seem to figure out why this is. He is trying to get me to switch internet providers because he is convinced that it is their problem, but this cannot possibly be the issue since it works great on mine. He has an xbox hooked up to the wifi that he says also works poorly. I really can't see switching providers given that I am experiencing absolutely zero problems. How can I help my friend?

    Read the article

  • Best Pratices for a Network File Share?

    - by Chris
    So we have a file share that was started 10 years or so ago and it started off with the best intentions. But now it's gotten bloated, there's files in there that nobody know who put them there, it's hard to find information, ect ect. You probably know the problem. So what I'm wondering is what do people do in this situation. Does anyone know of a decent program that can go through a file share and find files that no body has touched? Duplicate files? Any other suggestions on cleaning this mess up?

    Read the article

  • Wireless mouse keeps freezing when using whole network bandwidth

    - by Ümit AKKAYA
    Hi i have wireless mouse and keyboard connected to pc with USB receiver. When i downloading something without limiting download speed, mouse and keyboard keep freezing randomly. Mouse : Microsoft Wireless Mouse 5000 Keyboard : Microsoft keyboard 3000 v2 Chipset : Intel HM65 Processor : Intel Core i7 2670QM @ 2200MHz Physical Memory : 8192MB (2 x 4096 DDR3-SDRAM) OS : Win 7 x64 Note : The solution described in http://superuser.com/a/309622/157168 not helped.

    Read the article

  • postfix smtpd rejecting mail from outside network match_list_match: no match

    - by Loopo
    My postfix (V: 2.5.5-1.1) running on ubuntu server (9.04) started to reject mail arriving in from outside about 2 weeks ago. Doing a "manual" session via telnet shows that the connection is always closed after the MAIL FROM: [email protected] line is input, with the message "Connection closed by foreign host." Doing the same from another client inside the LAN works fine. In the log files I get the line "lost connection after MAIL from xxxxx.tld[xxx.xxx.xxx.xxx]" This is after some lines like: match_hostaddr: XXX.XXX.XXX.XXX ~? [::1]/128 match_hostname: XXXX.tld ~? 192.168.1.0/24 ... match_list_match: xxx.xxx.xxx.xxx: no match which seem to suggest some kind of filter which checks for allowed addresses. I have been unable to locate where this filter lives, or how to turn it off. I'm not even sure if that's what's causing my problem. Connections from inside the LAN don't get disconnected even though they also show a "match_list_match: ... no match" line. I didn't change any configuration files recently, below is my main.cf as it currently stands. I don't really know what all the parameters do and how they interact. I just set it up initially and it worked fine (up to recently). smtpd_banner = $myhostname ESMTP $mail_name (GNU) biff = no readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/server.crt smtpd_tls_key_file=/etc/ssl/private/server.key #smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_sasl_auth_enable = no smtp_use_tls=no smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth myhostname = XXXXXXX.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = XXXX.XXXX.com, XXXX.com, localhost.XXXXX.com, localhost relayhost = XXX.XXX.XXX.XXX mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.1.0/24 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_sasl_local_domain = #smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_ when checking the process list, postfix/smtpd runs as smtpd -n smtp -t inet -u -c -o stress -v -v Any clues?

    Read the article

  • How to access web server of any machine of my network from the outside

    - by Luc
    Hello, I have an ip like username.dyndns.org, this is the external IP of my router. On my lan, I have several machine (m1, m2, ...) , each running a dedicated web server. Is it possible to reach each machine from the outside with something like: http://m1.username.dyndns.org http://m2.username.dyndns.org ? Do you know what needs to be configured in my router for NAT ? Also, is there a special directive in Apache to do so ? Thanks a lot, Regards, Luc

    Read the article

  • Very low throughput on 10GbE network

    - by aix
    I have two Linux machines, each equipped with a Solarflare SFN5122F 10GbE NIC. The two NICs are connected together with an SFP+ Direct Attach cable. I am using netperf to measure TCP throughput between the two machines. On one box, I run: netserver and on the other: netperf -t TCP_STREAM -H 192.168.x.x -- -m 32768 I get: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.x.x (192.168.x.x) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 32768 10.02 1321.34 The measured throughput is 1.3Gb/s. This is 7.5x below the theoretical maximum, and only 30% faster than 1GbE. What steps can I take to troubleshoot this?

    Read the article

  • New computer WindowsXP on Server 2003 network will not connect to file server

    - by Susan Otto
    When we try to connect to our file server with the new computer, it denies access. The computer is joined to the domain and I can see it on active directory. We need to connect to the file server for printing and terminal services. We have had this happen before and found that reinstalling Windows will fix the problem but I would like a speedier solution. any help would be appreciated.

    Read the article

  • Share a USB sound card over a network/bluetooth (Mac & PC)

    - by AlexW
    I've been wondering how I can stream audio to an external Edirol USB sound card, wirelessly, on both Mac and PC. I'm not looking for high quality transmission, just to play mp3s from my Mac laptop to a USB sound card that is attached to two very nice balanced studio reference monitors. Is there any way I can firstly power the sound card box, and secondly, provide with an audio stream along it's USB input. I've looked at the Belkin USB hub, and I have a Time Capsule with the AirPort interface inside. These things seem to do vaguely what I want but when it comes to audio, the specifications are less clear. Any suggestions very welcome.

    Read the article

  • What does this strange network/subnet mask mean?

    - by dunxd
    I'm configuring a new ASA 5505 for deployment as a VPN endpoint in a remote office. After configuring it and connecting the VPN, I get the following messages: WARNING: Pool (10.6.89.200) overlap with existing pool. ERROR: IP address,mask <10.10.0.0,93.137.70.9> doesn't pair 10.6.89.200 is the address I configured for the ASA. It has the subnet mask 255.255.255.0. The ip address 10.10.0.0 corresponds to one of our subnets, but it certainly wouldn't have a subnet mask of 93.137.70.9. That looks more like a public IP address (and resolves to an ADSL connection somewhere). I am sure if we had such a subnet configured, that it would indeed overlap with 10.6.89.200. There is no reference to 93.137.70.9 in the config of this ASA or our head office ASA. Can anyone shed light on what is going on here? The sudden appearance of a strange subnet mask is a bit alarming.

    Read the article

  • Taskbar Network "Repair" menu option gone in Windows 7

    - by JohnB
    I used to LOVE that feature in Windows XP! Just right-clicked on the WiFi icon on the Taskbar (lower right-hand corner), then Repair. It doesn't take that long, and it usually helped me since I constantly go back and forth between LAN at work, VPN on WiFi from work and home, and also VPN to my own personal server. Even if you didn't need to refresh, doing so never hurts! Unfortunately, the feature seems to be removed from Win7 :( Now you can check for problems, but it only does the refresh if it thinks it needs too, and the whole process tasks so darn long! Is there a way to Repair my WiFi connection quickly and easily on Win7?

    Read the article

  • Network architecture when using Rackspace's Cloud

    - by brianz
    I'm planning on launching a web application soon, and have decided on using Rackspace's Cloud offering with Debian. I'm not expecting that much traffic to start, but would rather get the architecture correct now even with the small VPSs. The thing I'm not quite sure about is how many VPSs I should get. At a minimum, I know I'll want three VPSs: Two Apache webservers One server for MySQL I'd also like: Nginx load balancer MySQL replication memcached I'm not sure where those last three processes should be running. Can the load balancer run on the same machine as the MySQL slave, or should they each run on their own machine? Does memcached run alongside the webservers or on different machines?

    Read the article

  • External routing for local interfaces in a virtualized network

    - by Arkaitz Jimenez
    Current setup: br0| |-- tun10 -pipe-tun0(192.240.240.1) |-- tun11 -pipe-tun1(192.240.240.2) |-- tun12 -pipe-tun2(192.240.240.3) The pipe program is a custom program that forwards data back2back between two tun interfaces. The idea is puting 2 programs in .2 and .3 while keeping .1 as the local interface in the current machine. The main problem is that I want to route packets to .2 and to .3 through .1 and br0, but as they are local interfaces, the kernel ignores any routing instruction, it just delivers the packet to the proper interface. Tried iptables, but the nat table doesn't even see ping packets to those ifaces. A "ping 192.240.240.2" delivers a icmp packet with source and dest .2 to tun1, ideally it should deliver a source .1 dest .2 at tun1 through tun0-br0-tun1 Any hint? Here the output of some commands: Output

    Read the article

  • Windows periodically disconnects, reconnects to the network

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it also happens. (When I initially wrote this question I didn't notice it.) ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM A result of some tests a couple of the disconnects: C:\Documents and Settings\eyalroz.BAKNUNIN>nslookup google.com DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 192.117.235.235: Timed out DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 62.219.186.7: Timed out *** Default servers are not available Server: UnKnown Address: 192.117.235.235 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out C:\Documents and Settings\eyalroz.BAKNUNIN>ping 194.90.1.5 Pinging 194.90.1.5 with 32 bytes of data: Control-C ^C C:\Documents and Settings\eyalroz.BAKNUNIN>tracert -d 194.90.1.5 Tracing route to 194.90.1.5 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.254 2 * * 11 ms 10.168.128.1 3 14 ms 13 ms 14 ms 212.179.160.142 4 * * * Request timed out. 5 * * * Request timed out. 6 * * 47 ms 62.219.189.169 7 31 ms 27 ms 32 ms 62.219.189.150 8 15 ms 14 ms 16 ms 192.114.65.202 9 15 ms 15 ms 11 ms 212.143.10.66 10 13 ms 29 ms 31 ms 212.143.12.234 11 35 ms 15 ms 18 ms 212.143.8.72 12 22 ms 22 ms 16 ms 194.90.1.5 I usually ping 194.90.1.5 (which is not at my ISP) with 15ms response time and no losses. Things I've done/tried: [2012-03-26] I replaced the cable; I thought that made a difference, but the disconnects were back a while later, so that wasn't it. Updated the NIC driver. Tried reducing the MTU (used a utility called Dr. TCP); there was no effect. I updated my board BIOS revision (which caused all the HW to be "reinstalled" or re-identified - successfully). I installed another NIC, and tried switching to it - same effect with the on-board NIC. A while back I tried another router (although it was an Edimax model) - same problem. Connected the computer directly, with no router. Same problem. ping -t to the router (192.168.0.254) gives pongs, nothing is lost, and time is < 1 ms almost always (sometimes it says 1 or 2 ms). This is the case also during the disconnects.

    Read the article

  • 3 Servers, 2 Work Fine, One Has Network Issues

    - by ScaleOvenStove
    i have 3 servers, all relatively the same hardware/config, etc. I run some data pulls on all 3, and on 2 of them, they have 1 nic, and they work fine. On the other , there are 2 nics, and unless they are both plugged in or teamed, the processes time out. Any ideas on why this would be? It doesn't make sense to me, as the other two work fine with 1 nic and don't time out when running the same processes.

    Read the article

  • create assembly from network location

    - by mjw06d
    The error I'm receiving: CREATE ASSEMBLY failed because it could not open the physical file "\\<server>\<folder>\<assembly>.dll": 5(Access is denied.). TSQL: exec sp_configure 'clr enabled', 1 reconfigure go create assembly <assemblyname> from '\\<server>\<folder>\<assembly>.dll' with permission_set = safe How can I create an assembly from a unc path?

    Read the article

  • Reset ACLs in NFS4/ZFS network share

    - by Christoph
    How can I reset the ACLs on a ZFS file system on OpenIndiana that is exported via NFS4 and replace it with inherited permissions? Basically, I want to do the equivalent of icacls "C:\path\to\folder" /reset /T /C on Windows on this machine. However, neither the chmod command on OpenIndiana nor the nfs4_setacl seems to allow for deleting all ACLs although the client correctly interprets inherited ACLs if a node does not have an own one.

    Read the article

  • Debian - starting UFW (Uncomplicated Firewall) before network interfaces are operational

    - by Tomasz Zielinski
    I want to install UFW on Debian Lenny. Everything looks straightforward except that I don't know where to plug UFW startup script so that it configures iptables before hax0rs can break in. I've reviewed runlevel directories and in /etc/rc0.d, /etc/rc6.d and /etc/rcS.d there are items like these: S35networking -> ../init.d/networking S36ifupdown -> ../init.d/ifupdown Runlevel 0 and 6 are for shutdown and reboot so I guess nothing should be changed there, but runlevel S advertises itself (in README) like something for me: The scripts in this directory whose names begin with an 'S' are executed once when booting the system, even when booting directly into single user mode. The following sequence points are defined at this time: * After the S40 scripts have executed, all local file systems are mounted and networking is available. All device drivers have been initialized. (What bothers me is that both rc0/6.d and rcS.d point to the same networking and ifupdown scripts, but after looking at sources I believe those scripts are smart enough to figure out where to start and where to stop networking.) Now, I think that I should plug my /lib/ufw/ufw-init into /etc/rcS.d, with priority higher that the one of ifupdown and networking, i.e. <= 38 for my /etc/rcS.d. Am I right in this "analysis" ?

    Read the article

  • The ping response time doesn't reflect the real network response time

    - by yangchenyun
    I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

    Read the article

  • Odd performance with C# Asynchronous server socket

    - by The.Anti.9
    I'm working on a web server in C# and I have it running on Asynchronous socket calls. The weird thing is that for some reason, when you start loading pages, the 3rd request is where the browser won't connect. It just keeps saying "Connecting..." and doesn't ever stop. If I hit stop. and then refresh, it will load again, but if I try another time after that it does the thing where it doesn't load again. And it continues in that cycle. I'm not really sure what is making it do that. The code is kind of hacked together from a couple of examples and some old code I had. Any miscellaneous tips would be helpful as well. Heres my little Listener class that handles everything (pastied here. thought it might be easier to read this way) using System; using System.Collections.Generic; using System.Net; using System.Net.Sockets; using System.Text; using System.Threading; namespace irek.Server { public class Listener { private int port; private Socket server; private Byte[] data = new Byte[2048]; static ManualResetEvent allDone = new ManualResetEvent(false); public Listener(int _port) { port = _port; } public void Run() { server = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); IPEndPoint iep = new IPEndPoint(IPAddress.Any, port); server.Bind(iep); Console.WriteLine("Server Initialized."); server.Listen(5); Console.WriteLine("Listening..."); while (true) { allDone.Reset(); server.BeginAccept(new AsyncCallback(AcceptCon), server); allDone.WaitOne(); } } private void AcceptCon(IAsyncResult iar) { allDone.Set(); Socket s = (Socket)iar.AsyncState; Socket s2 = s.EndAccept(iar); SocketStateObject state = new SocketStateObject(); state.workSocket = s2; s2.BeginReceive(state.buffer, 0, SocketStateObject.BUFFER_SIZE, 0, new AsyncCallback(Read), state); } private void Read(IAsyncResult iar) { try { SocketStateObject state = (SocketStateObject)iar.AsyncState; Socket s = state.workSocket; int read = s.EndReceive(iar); if (read > 0) { state.sb.Append(Encoding.ASCII.GetString(state.buffer, 0, read)); if (s.Available > 0) { s.BeginReceive(state.buffer, 0, SocketStateObject.BUFFER_SIZE, 0, new AsyncCallback(Read), state); return; } } if (state.sb.Length > 1) { string requestString = state.sb.ToString(); // HANDLE REQUEST HERE // Temporary response string resp = "<h1>It Works!</h1>"; string head = "HTTP/1.1 200 OK\r\nContent-Type: text/html;\r\nServer: irek\r\nContent-Length:"+resp.Length+"\r\n\r\n"; byte[] answer = Encoding.ASCII.GetBytes(head+resp); // end temp. state.workSocket.BeginSend(answer, 0, answer.Length, SocketFlags.None, new AsyncCallback(Send), state.workSocket); } } catch (Exception) { return; } } private void Send(IAsyncResult iar) { try { SocketStateObject state = (SocketStateObject)iar.AsyncState; int sent = state.workSocket.EndSend(iar); state.workSocket.Shutdown(SocketShutdown.Both); state.workSocket.Close(); } catch (Exception) { } return; } } } And my SocketStateObject: public class SocketStateObject { public Socket workSocket = null; public const int BUFFER_SIZE = 1024; public byte[] buffer = new byte[BUFFER_SIZE]; public StringBuilder sb = new StringBuilder(); }

    Read the article

  • Simple monitoring utility with up/down statuses of the host's network connectivity and services

    - by Beaming Mel-Bin
    We've looked at many monitoring tools (SolarWinds, Zabbix, Nagios) through out the last 10 years but they never took hold because they are overly complicated. I am willing to try them again or something new at this point but with a much simpler goal: ping to check up and down of host tcp probes to test up and down of service notifications via e-mail web GUI prefer an OSS solution Wanted to know if someone has any recommendations on this. This could be a Windows or Linux application. Preferably without the reqirement of agents. I don't even need SNMP support but that may be nice for expanding once we have the above mentioned bare minimum in place.

    Read the article

  • i keep getting a 403 forbidden permission error on my fedora server through my local network

    - by kdavis8
    Trying to view a javascript file on my home server I get the following error: Forbidden You don't have permission to access /jquery-1.8.2.js on this server. Apache/2.2.22 (Fedora) Server at 192.168.1.3 Port 80 I have given all users access to the file like this: sudo chmod -R 777 /var/www/html/jquery-1.8.2.js I have even gone as far as changing the user & group properties in the httpd.conf file.

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >