Search Results

Search found 4343 results on 174 pages for 'man in the middle'.

Page 156/174 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

  - by david.talamelli

  [Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

  Read the article

• Some non-generic collections

  - by Simon Cooper

  Although the collections classes introduced in .NET 2, 3.5 and 4 cover most scenarios, there are still some .NET 1 collections that don't have generic counterparts. In this post, I'll be examining what they do, why you might use them, and some things you'll need to bear in mind when doing so. BitArray System.Collections.BitArray is conceptually the same as a List<bool>, but whereas List<bool> stores each boolean in a single byte (as that's what the backing bool[] does), BitArray uses a single bit to store each value, and uses various bitmasks to access each bit individually. This means that BitArray is eight times smaller than a List<bool>. Furthermore, BitArray has some useful functions for bitmasks, like And, Xor and Not, and it's not limited to 32 or 64 bits; a BitArray can hold as many bits as you need. However, it's not all roses and kittens. There are some fundamental limitations you have to bear in mind when using BitArray: It's a non-generic collection. The enumerator returns object (a boxed boolean), rather than an unboxed bool. This means that if you do this: foreach (bool b in bitArray) { ... } Every single boolean value will be boxed, then unboxed. And if you do this: foreach (var b in bitArray) { ... } you'll have to manually unbox b on every iteration, as it'll come out of the enumerator an object. Instead, you should manually iterate over the collection using a for loop: for (int i=0; i<bitArray.Length; i++) { bool b = bitArray[i]; ... } Following on from that, if you want to use BitArray in the context of an IEnumerable<bool>, ICollection<bool> or IList<bool>, you'll need to write a wrapper class, or use the Enumerable.Cast<bool> extension method (although Cast would box and unbox every value you get out of it). There is no Add or Remove method. You specify the number of bits you need in the constructor, and that's what you get. You can change the length yourself using the Length property setter though. It doesn't implement IList. Although not really important if you're writing a generic wrapper around it, it is something to bear in mind if you're using it with pre-generic code. However, if you use BitArray carefully, it can provide significant gains over a List<bool> for functionality and efficiency of space. OrderedDictionary System.Collections.Specialized.OrderedDictionary does exactly what you would expect - it's an IDictionary that maintains items in the order they are added. It does this by storing key/value pairs in a Hashtable (to get O(1) key lookup) and an ArrayList (to maintain the order). You can access values by key or index, and insert or remove items at a particular index. The enumerator returns items in index order. However, the Keys and Values properties return ICollection, not IList, as you might expect; CopyTo doesn't maintain the same ordering, as it copies from the backing Hashtable, not ArrayList; and any operations that insert or remove items from the middle of the collection are O(n), just like a normal list. In short; don't use this class. If you need some sort of ordered dictionary, it would be better to write your own generic dictionary combining a Dictionary<TKey, TValue> and List<KeyValuePair<TKey, TValue>> or List<TKey> for your specific situation. ListDictionary and HybridDictionary To look at why you might want to use ListDictionary or HybridDictionary, we need to examine the performance of these dictionaries compared to Hashtable and Dictionary<object, object>. For this test, I added n items to each collection, then randomly accessed n/2 items: So, what's going on here? Well, ListDictionary is implemented as a linked list of key/value pairs; all operations on the dictionary require an O(n) search through the list. However, for small n, the constant factor that big-o notation doesn't measure is much lower than the hashing overhead of Hashtable or Dictionary. HybridDictionary combines a Hashtable and ListDictionary; for small n, it uses a backing ListDictionary, but switches to a Hashtable when it gets to 9 items (you can see the point it switches from a ListDictionary to Hashtable in the graph). Apart from that, it's got very similar performance to Hashtable. So why would you want to use either of these? In short, you wouldn't. Any gain in performance by using ListDictionary over Dictionary<TKey, TValue> would be offset by the generic dictionary not having to cast or box the items you store, something the graphs above don't measure. Only if the performance of the dictionary is vital, the dictionary will hold less than 30 items, and you don't need type safety, would you use ListDictionary over the generic Dictionary. And even then, there's probably more useful performance gains you can make elsewhere.

  Read the article

• SQL SERVER – Not Possible – Delete From Multiple Table – Update Multiple Table in Single Statement

  - by pinaldave

  There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? The answer is – No, You cannot and you should not. SQL Server does not support deleting or updating from two tables in a single update. If you want to delete or update two different tables – you may want to write two different delete or update statements for it. This method has many issues – from the consistency of the data to SQL syntax. Now here is the real reason for this blog post – yesterday I was asked this question again and I replied my canned answer saying it is not possible and it should not be any way implemented that day. In the response to my reply I was pointed out to my own blog post where user suggested that I had previously mentioned this is possible and with demo example. Let us go over my conversation – you may find it interesting. Let us call the user DJ. DJ: Pinal, can we delete multiple table in a single statement or with single delete statement? Pinal: No, you cannot and you should not. DJ: Oh okey, if that is the case, why do you suggest to do that? Pinal: (baffled) I am not suggesting that. I am rather suggesting that it is not possible and it should not be possible. DJ: Hmm… but in that case why did you blog about it earlier? Pinal: (What?) No, I did not. I am pretty confident. DJ: Well, I am confident as well. You did. Pinal: In that case, it is my word against your word. Isn’t it? DJ: I have proof. Do you want to see it that you suggest it is possible? Pinal: Yes, I will be delighted too. (After 10 Minutes) DJ: Here are not one but two of your blog posts which talks about it - SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2 SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – T-SQL Example – Part 2 of 2 Pinal: Oh! DJ: I know I was correct. Pinal: Well, oh man, I did not mean there what you mean here. DJ: I did not understand can you explain it further. Pinal: Here we go. The example in the other blog is the example of the cascading delete or cascading update. I think you may want to understand the concept of the foreign keys and cascading update/delete. The concept of cascading exists to maintain data integrity. If there primary keys get deleted the update or delete reflects on the foreign key table to maintain the key integrity and data consistency. SQL Server follows ANSI Entry SQL with regard to referential integrity between PrimaryKey and ForeignKey columns which requires the inserting, updating, and deleting of data in related tables to be restricted to values that preserve the integrity. This is all together different concept than deleting multiple values in a single statement. When I hear that someone wants to delete or update multiple table in a single statement what I assume is something very similar to following. DELETE/UPDATE Table 1 (cols) Table 2 (cols) VALUES … which is not valid statement/syntax as well it is not ASNI standards as well. I guess, after this discussion with DJ, I realize I need to do a blog post so I can add the link to this blog post in my canned answer. Well, it was a fun conversation with DJ and I hope it the message is very clear now. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Joins, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Where Facebook Stands Heading Into 2013

  - by Mike Stiles

  In our last blog, we looked at how Twitter is positioned heading into 2013. Now it’s time to take a similar look at Facebook. 2012, for a time at least, seemed to be the era of Facebook-bashing. Between a far-from-smooth IPO, subsequent stock price declines, and anxiety over privacy, the top social network became a target for comedians, politicians, business journalists, and of course those who were prone to Facebook-bash even in the best of times. But amidst the “this is the end of Facebook” headlines, the company kept experimenting, kept testing, kept innovating, and pressing forward, committed as always to the user experience, while concurrently addressing monetization with greater urgency. Facebook enters 2013 with over 1 billion users around the world. Usage grew 41% in Brazil, Russia, Japan, South Korea and India in 2012. In the Middle East and North Africa, an average 21 new signups happen per minute. Engagement and time spent on the site would impress the harshest of critics. Facebook, while not bulletproof, has become such an integrated daily force in users’ lives, it’s getting hard to imagine any future mass rejection. You want to see a company recognizing weaknesses and shoring them up. Mobile was a weakness in 2012 as Facebook was one of many caught by surprise at the speed of user migration to mobile. But new mobile interfaces, better mobile ads, speed upgrades, standalone Messenger and Pages mobile apps, and the big dollar acquisition of Instagram, were a few indicators Facebook won’t play catch-up any more than it has to. As a user, the cool thing about Facebook is, it knows you. The uncool thing about Facebook is, it knows you. The company’s walking a delicate line between the public’s competing desires for customized experiences and privacy. While the company’s working to make privacy options clearer and easier, Facebook’s Paul Adams says data aggregation can move from acting on what a user is engaging with at the moment to a more holistic view of what they’re likely to want at any given time. To help learn about you, there’s Open Graph. Embedded through diverse partnerships, the idea is to surface what you’re doing and what you care about, and help you discover things via your friends’ activities. Facebook’s Director of Engineering, Mike Vernal, says building mobile social apps connected to Facebook in such ways is the next wave of big innovation. Expect to see that fostered in 2013. The Facebook site experience is always evolving. Some users like that about Facebook, others can’t wait to complain about it…on Facebook. The Facebook focal point, the News Feed, is not sacred and is seeing plenty of experimentation with the insertion of modules. From upcoming concerts, events, suggested Pages you might like, to aggregated “most shared” content from social reader apps, plenty could start popping up between those pictures of what your friends had for lunch.  As for which friends’ lunches you see, that’s a function of the mythic EdgeRank…which is also tinkered with. When Facebook changed it in September, Page admins saw reach go down and the high anxiety set in quickly. Engagement, however, held steady. The adjustment was about relevancy over reach. (And oh yeah, reach was something that could be charged for). Facebook wants users to see what they’re most likely to like, based on past usage and interactions. Adding to the “cream must rise to the top” philosophy, they’re now even trying out ordering post comments based on the engagement the comments get. Boy, it’s getting competitive out there for a social engager. Facebook has to make $$$. To do that, they must offer attractive vehicles to marketers. There are a myriad of ad units. But a key Facebook marketing concept is the Sponsored Story. It’s key because it encourages content that’s good, relevant, and performs well organically. If it is, marketing dollars can amplify it and extend its reach. Brands can expect the rollout of a search product and an ad network. That’s a big deal. It takes, as Open Graph does, the power of Facebook’s user data and carries it beyond the Facebook environment into the digital world at large. No one could target like Facebook can, and some analysts think it could double their roughly $5 billion revenue stream. As every potential revenue nook and cranny is explored, there are the users themselves. In addition to Gifts, Facebook thinks users might pay a few bucks to promote their own posts so more of their friends will see them. There’s also word classifieds could be purchased in News Feeds, though they won’t be called classifieds. And that’s where Facebook stands; a wildly popular destination, a part of our culture, with ever increasing functionalities, the biggest of big data, revenue strategies that appeal to marketers without souring the user experience, new challenges as a now public company, ongoing privacy concerns, and innovations that carry Facebook far beyond its own borders. Anyone care to write a “this is the end of Facebook” headline? @mikestilesPhoto via stock.schng

  Read the article

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• Come meet our Interns in Dublin

  - by klaudia.drulis

  Oracle Worldwide Product Translation Group (WPTG) provides solutions for all Oracle product and Content translation requirements. WPTG is a global organisation with its headquarters in Ireland and employees in Oracle offices worldwide. WPTG offer expertise in fields such as process engineering, tools development, linguistic quality, terminology, global product release, financial and vendor management. WPTG provides translation solution for over 40 languages including Asia Pacific, European, American and Middle Eastern languages. WPTG first introduced an intern program over 10 years ago and it has become a key component of our teams structure. The majority of Interns are sourced from a Computer Science related course, these Interns joining the engineering team. Others are sourced from Business courses and work within the Business / Project management area. The intern program allows us to maintain ties with current course curriculum and brings fresh energy and perspective into our Organisation. Four of the full time staff working in Dublin today joined us originally as Interns and subsequently were offered permanent positions. Come Meet some of our 2010 Interns, Come and see what Darragh, Anthony, Caoimhe, James and Artemij thought about working within the WPTG at Oracle: Darragh “Oracle has been a fun, challenging work placement for me. From day one I was treated as a full member of staff, this was both comforting and a little bit scary. The responsibilities stack up but I found I was able to keep on top of everything and even make improvements to how we handle a few things thanks to a great team and a very supportive manager. There’s a very positive atmosphere in work that’s really conducive to getting a lot of work done. Ideas seem to be the central hub in my line of business so all of my ideas and innovations were greeted with enthusiasm. Oracle has given me a fantastic opportunity and I urge you to grab it with both hands, you’ll find that you’re with a set of like minded people from all works of life that make work both interesting and fun. Even when the pressure is on you know that you can always get help and advice from someone nearby. My last word of advice is don’t be afraid to stick your neck out, everyone here is willing to learn, try something new and innovate, your voice will be heard and who knows, you could end up having a large impact on Oracle and your career.” Anthony “I had a great experience working with Oracle, from day one I was treated like a full member of staff with responsibilities of my own. I found that the more I put into the work the more I got out from the experience. Volunteering and being willing to face challenges have made this a more exciting placement. I am given a lot of leeway to do my own projects and so I’ve found that I am really enjoying my time here.” Caoimhe “I am currently spending my year of placement within the Release Management Team in the WPTG. My main role is to handle the finance process of all translation projects under 100k which includes creating workspecs and PO's, sending out kits, dealing with vendor queries and handling the invoicing and payment part. I am really enjoying my time here at Oracle, everyone is very open and friendly and willing to help you out with any questions you may have. I would definitely be interested in returning to Oracle after I graduate!” James “I am currently on a 12 month placement with Oracle, working as part of the Worldwide Product Translation Group in the Business Management. The Business Management team provides a global view on WPTG’s vendor and business strategy and is an interface into WPTG for new business. The business management team work together to support the external translation partner network. My role is to support the Business Management team and also to work on various projects when the need arises. This involves working with translation vendors and working with other Oracle employees worldwide. I am really enjoying my time working for Oracle, at times it can be challenging bit also very rewarding. I would recommend any student wanting to undertake a placement year to apply to Oracle, I made some great friends and I will never forget my time in Dublin.” Artemij “From working within Oracle, I have truly understood what "career path" is, and what opportunities a large corporation like Oracle can offer. Without any illusions, the work itself is exciting, sometimes challenging, tests your ability to handle pressure, to make decisions and take responsibility, to learn quickly and cooperate efficiently in order to solve a problem. I have learned a lot about myself. What I am good at, where and what I can do better. My placement at Oracle has allowed me to get a clearer picture of what I want, and which door I am going to open after college. If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com

  Read the article

• Infiniband: a highperformance network fabric - Part I

  - by Karoly Vegh

  Introduction:At the OpenWorld this year I managed to chat with interesting people again - one of them answering Infiniband deepdive questions with ease by coffee turned out to be one of Oracle's IB engineers, Ted Kim, who actually actively participates in the Infiniband Trade Association and integrates Oracle solutions with this highspeed network. This is why I love attending OOW. He granted me an hour of his time to talk about IB. This post is mostly based on that tech interview.Start of the actual post: Traditionally datatransfer between servers and storage elements happens in networks with up to 10 gigabit/seconds or in SANs with up to 8 gbps fiberchannel connections. Happens. Well, data rather trickles through.But nowadays data amounts grow well over the TeraByte order of magnitude, and multisocket/multicore/multithread Servers hunger data that these transfer technologies just can't deliver fast enough, causing all CPUs of this world do one thing at the same speed - waiting for data. And once again, I/O is the bottleneck in computing. FC and Ethernet can't keep up. We have half-TB SSDs, dozens of TB RAM to store data to be modified in, but can't transfer it. Can't backup fast enough, can't replicate fast enough, can't synchronize fast enough, can't load fast enough. The bad news is, everyone is used to this, like back in the '80s everyone was used to start compile jobs and go for a coffee. Or on vacation. The good news is, there's an alternative. Not so-called "bleeding-edge" 8gbps, but (as of now) 56. Not layers of overhead, but low latency. And it is available now. It has been for a while, actually. Welcome to the world of Infiniband. Short history:Infiniband was born as a result of joint efforts of HPAQ, IBM, Intel, Sun and Microsoft. They planned to implement a next-generation I/O fabric, in the 90s. In the 2000s Infiniband (from now on: IB) was quite popular in the high-performance computing field, powering most of the top500 supercomputers. Then in the middle of the decade, Oracle realized its potential and used it as an interconnect backbone for the first Database Machine, the first Exadata. Since then, IB has been booming, Oracle utilizes and supports it in a large set of its HW products, it is the backbone of the famous Engineered Systems: Exadata, SPARC SuperCluster, Exalogic, OVCA and even the new DB backup/recovery box. You can also use it to make servers talk highspeed IP to eachother, or to a ZFS Storage Appliance. Following Oracle's lead, even IBM has jumped the wagon, and leverages IB in its PureFlex systems, their first InfiniBand Machines.IB Structural Overview: If you want to use IB in your servers, the first thing you will need is PCI cards, in IB terms Host Channel Adapters, or HCAs. Just like NICs for Ethernet, or HBAs for FC. In these you plug an IB cable, going to an IB switch providing connection to other IB HCAs. Of course you're going to need drivers for those in your OS. Yes, these are long-available for Solaris and Linux. Now, what protocols can you talk over IB? There's a range of choices. See, IB isn't accepting package loss like Ethernet does, and hence doesn't need to rely on TCP/IP as a workaround for resends. That is, you still can run IP over IB (IPoIB), and that is used in various cases for control functionality, but the datatransfer can run over more efficient protocols - like native IB. About PCI connectivity: IB cards, as you see are fast. They bring low latency, which is just as important as their bandwidth. Current IB cards run at 56 gbit/s. That is slightly more than double of the capacity of a PCI Gen2 slot (of ~25 gbit/s). And IB cards are equipped usually with two ports - that is, altogether you'd need 112 gbit/s PCI slots, to be able to utilize FDR IB cards in an active-active fashion. PCI Gen3 slots provide you with around ~50gbps. This is why the most IB cards are configured in an active-standby way if both ports are used. Once again the PCI slot is the bottleneck. Anyway, the new Oracle servers are equipped with Gen3 PCI slots, an the new IB HCAs support those too. Oracle utilizes the QDR HCAs, running at 40gbp/s brutto, which translates to a 32gbp/s net traffic due to the 10:8 signal-to-data information ratio. Consolidation techniques: Technology never stops to evolve. Mellanox is working on the 100 gbps (EDR) version already, which will be optical, since signal technology doesn't allow EDR to be copper. Also, I hear you say "100gbps? I will never use/need that much". Are you sure? Have you considered consolidation scenarios, where (for example with Oracle Virtual Network) you could consolidate your platform to a high densitiy virtualized solution providing many virtual 10gbps interfaces through that 100gbps? Technology never stops to evolve. I still remember when a 10mbps network was impressively fast. Back in those days, 16MB of RAM was a lot. Now we usually run servers with around 100.000 times more RAM. If network infrastrucure speends could grow as fast as main memory capacities, we'd have a different landscape now :) You can utilize SRIOV as well for consolidation. That is, if you run LDoms (aka Oracle VM Server for SPARC) you do not have to add physical IB cards to all your guest LDoms, and you do not need to run VIO devices through the hypervisor either (avoiding overhead). You can enable SRIOV on those IB cards, which practically virtualizes the PCI bus, and you can dedicate Physical- and Virtual Functions of the virtualized HCAs as native, physical HW devices to your guests. See Raghuram's excellent post explaining SRIOV. SRIOV for IB is supported since LDoms 3.1.  This post is getting lengthier, so I will rename it to Part I, and continue it in a second post. 

  Read the article

• Build 2012, some thoughts..

  - by Dennis Vroegop

  I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

  Read the article

• How Estimates Became Quotes

  - by Lee Brandt

  It’s our fault. Well, not completely, but we haven’t helped the situation any. All of what follows comes from my own experiences which, from talking to lots of other developers about it, seems to be pretty much par for the course. Where We Started When we first started estimating, we estimated pretty clearly. We would try to imagine something we’d done that was similar to the project being estimated and we’d toss it about in our heads a bit and see how much bigger or smaller we thought this new thing was, and add or subtract accordingly. We wouldn’t spend too much time on it, because we wanted to get to writing the software. Eventually, we’d come across some huge problem that there was now way we could’ve known about ahead of time. Either we didn’t see this thing or, we didn’t realize that this particular version of a problem would be so… problematic. We usually call this “not knowing what we don’t know”. It’s unavoidable. We just can’t know. Until we wade in and start putting some code together, there are just some things we won’t know… and some things we don’t even know that we don’t know. Y’know? So what happens? We go over budget. Project managers scream and dance the dance of the stressed-out project manager, and there is nothing we can do (or could’ve done) about it. We didn’t know. We thought about it for a bit and we didn’t see this herculean task sitting in the middle of our nice quiet project, and it has bitten us in the rear end. We now know how to handle this in the future, though. We will take some more time to pick around the requirements and discover all those things we don’t know. We’ll do some prototyping, we’ll read some blogs about similar projects, we’ll really grill the customer with questions during the requirements gathering phase. We’ll keeping asking “what else?” until the shove us down the stairs. We’ll take our time and uncover it all. We Learned, But Good The next time comes, and you know what happens? We do it. We grill the customer for weeks and prototype and read and research and we estimate everything down to the last button on the last form. Know what that gets us? It gets us three months of wasted time, and our estimate will still be off. Possibly off by a factor of four. WTF, mate? No way we could be surprised by something! We uncovered every particle. We turned every stone. How is it we still came across unknowns? Because we STILL didn’t know what we didn’t know. How could we? We didn’t know to ask. The worst part is, we’ve now convinced the product that this is NOT an estimate. It is a solid number based on massive research and an endless number of questions that they answered. There is absolutely now way you don’t know everything there is to know about this project now. No way there is anything you haven’t uncovered. And their faith in that “Esti-Quote” goes through the roof. When the project goes over this time, they might even begin to question whether or not you know what you’re doing. Who could blame them? You drilled them for weeks about every little thing, and when they complained about all the questions, you told them you wanted to uncover everything so there would be no surprises. SO we set them up to faile Guess, Then Plan We had a chance. At the beginning we could have just said, “That’s just a gut-feeling estimate, based on my past experience with similar projects. There could still be surprises.” If we spend SOME time doing SOME discovery and then bounce that against our own past experiences, we can come up with a fairly healthy estimate. We can then help the product owner understand that an estimate is a guess. Sure, it’s an educated guess, but it is still a guess. If we get it right it will be almost completely luck. Then, we help them to plan the development by taking that guess (yes, they still need the guess for planning purposes) and start measuring early and often to see if we still think we are right. We should adjust the estimate and alert the product owner as soon as we see problems (bad news does not age well) and we should be able to see any problems immediately if we are constantly measuring our pace. In lean software, we start with that guess and begin measuring cycle times immediately. Then we can make projections based on those cycle times and compare them to our estimate. This constant feedback is the best way to ensure that there are no surprises at the END of the project. There sill still be surprises, but we’ll see them sooner and have a better understanding of how they will affect our overall timeline. What do you think?

  Read the article

• WebLogic JDBC Use of Oracle Wallet for SSL

  - by Steve Felts

  Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

  Read the article

• Thought Oracle Usability Advisory Board Was Stuffy? Wrong. Justification for Attending OUAB: ROI

  - by ultan o'broin

  Looking for reasons tell your boss why your organization needs to join the Oracle Usability Advisory Board or why you need approval to attend one of its meetings (see the requirements)? Try phrases such as "Continued Return on Investment (ROI)", "Increased Productivity" or "Happy Workers". With OUAB your participation is about realizing and sustaining ROI across the entire applications life-cycle from input to designs to implementation choices and integration, usage and performance and on measuring and improving the onboarding and support experience. If you think this is a boring meeting of middle-aged people sitting around moaning about customizing desktop forms and why the BlackBerry is here to stay, think again! How about this for a rich agenda, all designed to engage the audience in a thought-provoking and feedback-illiciting day of swirling interactions, contextual usage, global delivery, mobility, consumerizationm, gamification and tailoring your implementation to reflect real users doing real work in real environments.  Foldable, rollable ereader devices provide a newspaper-like UK for electronic news. Or a way to wrap silicon chips, perhaps. Explored at the OUAB Europe Meeting (photograph from Terrace Restaurant in TVP. Nom.) At the 7 December 2012 OUAB Europe meeting in Oracle Thames Valley Park, UK, Oracle partners and customers stepped up to the mic and PPT decks with a range of facts and examples to astound any UX conference C-level sceptic. Over the course of the day we covered much ground, but it was all related in a contextual, flexibile, simplication, engagement way aout delivering results for business: that means solving problems. This means being about the user and their tasks and how to make design and technology transforms work into a productive activity that users and bean counters will be excited by. The sessions really gelled for me: 1. Mobile design patterns and the powerful propositions for customers and partners offered by using the design guidance with Oracle ADF Mobile. Customers' and partners' developers existing ADF developers are now productive, efficient ADF Mobile developers applying proven UX guidance using ADF Mobile components and other Oracle Fusion Middleware in the development toolkit. You can find the Mobile UX Design Patterns and Guidance on Building Mobile Apps on OTN. 2. Oracle Voice and Apps. How this medium offers so much potentual in the enterprise and offers a window in Fusion Apps cloud webservices, Oracle RightNow NLP and Nuance technology. Exciting stuff, demoed live on a mobile phone. Stay tuned for more features and modalities and how you can tailor your own apps experience.  3. Oracle RightNow Natural Language Processing (NLP) Virtual Assistant technology (Ella): how contextual intervention and learning from users sessions delivers a great personalized UX for users interacting with Ella, a fifth generation VA to solve problems and seek knowledge. 4. BYOD Keynote: A balanced keynote address contrasting Fujitsu's explaining of the conceprt, challenges, and trends and setting the expectation that BYOD must be embraced in a flexible way,  with the resolute, crafted high security enterprise requirements that nuancing the BYOD concept and proposals with the realities of their world of water tight information and device sharing policies. Fascinating stuff, as well providing anecdotes to make us thing about out own DYOD Deployments. One size does not fit all. 5. Icon Cultural Surveys Results and Insights Arising: Ever wondered about the cultural appropriateness of icons used in software UIs and how these icons assessed for global use? Or considered that social media "Like" icons might be  unacceptable hand gestures in culture or enterprise? Or do the old world icons like Save floppy disk icons still find acceptable? Well the survey results told you. Challenges must be tested, over time, and context of use is critical now, including external factors such as the internet and social media adoption. Indeed the fears about global rejection of the face and hand icons was not borne out, and some of the more anachronistic icons (checkbooks, microphones, real-to-real tape decks, 3.5" floppies for "save") have become accepted metaphors for current actions. More importantly the findings brought into focus the reason for OUAB - engage with and illicit feedback though working groups before we build anything. 6. EReaders and Oracle iBook: What is the uptake and trends of ereaders? And how about a demo of an iBook with enterprise apps content?  Well received by the audience, the session included a live running poll of ereader usage. 7. Gamification Design Jam: Fun, hands on event for teams of Oracle staff, partners and customers, actually building gamified flows, a practice that can be applied right away by customers and partners.  8. UX Direct: A new offering of usability best practices, coming to an external website for you in 2013. FInd a real user, observe their tasks, design and approve, build and measure. Simple stuff to improve apps implications no end. 9. FUSE (an internal term only, basically Fusion Simplified Experience): demo of the new Face of Fusion Applications: inherently mobile, simple to use, social, personalizable and FAST, three great demos from the HCM, CRM and ICT world on how these UX designs can be used in different ways. So, a powerful breadth and depth of UX solutions and opporunities for customers and partners to engage with and explore how they can make their users happy and benefit their business reaping continued ROI from those apps investments. Find out more about the OUAB and how to get involved here ... 

  Read the article

• The Linux powered LAN Gaming House

  - by sachinghalot

  LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

  Read the article

• A Visual Studio Release Grows in Brooklyn

  - by andrewbrust

  Yesterday, Microsoft held its flagship launch event for Office 2010 in Manhattan.  Today, the Redmond software company is holding a local launch event for Visual Studio (VS) 2010, in Brooklyn.  How come information workers get the 212 treatment and developers are relegated to 718? Well, here’s the thing: the Brooklyn Marriott is actually a great place for an event, but you need some intimate knowledge of New York City to know that.  NBC’s Studio 8H, where the Office launch was held yesterday (and from where SNL is broadcast) is a pretty small venue, but you’d need some inside knowledge to recognize that.  Likewise, while Office 2010 is a product whose value is apparent.  Appreciating VS 2010’s value takes a bit more savvy.  Setting aside its year-based designation, this release of VS, counting the old Visual Basic releases, is the 10th version of the product.  How can a developer audience get excited about an integrated development environment when it reaches double-digit version numbers?  Well, it can be tough.  Luckily, Microsoft sent Jay Schmelzer, a Group Program Manager from the Visual Studio team in Redmond, to come tell the Brooklyn audience why they should be excited. Turns out there’s a lot of reasons.  Support fro SharePoint development is a big one.  In previous versions of VS, that support has been anemic, at best.  Shortage of SharePoint developers is a huge issue in the industry, and this should help.  There’s also built in support for Windows Azure (Microsoft’s cloud platform) and, through a download, support for the forthcoming Windows Phone 7 platform.  ASP.NET MVC, a “close-to-the-metal” Web development option that does away with the Web Forms abstraction layer, has a first-class presence in VS.  So too does jQuery, the Open Source environment that makes JavaScript development a breeze.  The jQuery support is so good that Microsoft now contributes to that Open Source project and offers IntelliSense support for it in the code editor. Speaking of the VS code editor, it now supports multi-monitor setups, zoom-in, and block selection.  If you’re not a developer, this may sound confusing and minute.  I’ll just say that for people who are developers these are little things that really contribute to productivity, and that translates into lower development costs. The really cool demo, though, was around Visual Studio 2010’s new debugging features.  This stuff is hard to showcase, but I believe it’s truly breakthrough technology: imagine being able to step backwards in time to see what might have caused a bug.  Cool?  Now imagine being able to do that, even if you weren’t the tester and weren’t present while the testing was being done.  Then imagine being able to see a video screen capture of what the tester was doing with your app when the bug occurred.  VS 2010 allows all that.  This could be the demise of the IWOMM (“it works on my machine”) syndrome. After the keynote, I asked Schmelzer if any of Microsoft’s competitors have debugging tools that come close to VS 2010’s.  His answer was an earnest “we don’t think so.”  If that’s true, that’s a big deal, and a huge advantage for developer teams who adopt it.  It will make software development much cheaper and more efficient.  Kind of like holding a launch event at the Brooklyn Marriott instead of 30 Rock in Manhattan! VS 2010 (version 10) and Office 2010 (version 14) aren’t the only new product versions Microsoft is releasing right now.  There’s also SQL Server 2008 R2 (version 10.5), Exchange 2010 (version 8, I believe), SharePoint 2010 (version 4) and, of course, Windows 7.  With so many new versions at such levels of maturity, I think it’s fair to say Microsoft has reached middle-age.  How does a company stave off a potential mid-life crisis, especially when with young Turks like Google coming along and competing so fiercely?  Hard to say.  But if focusing on core value, including value that’s hard to play into a sexy demo, is part oft the answer, then Microsoft’s doing OK.  And if some new tricks, like Windows Phone 7, can gain some traction, that might round things out nicely. Are the legacy products old tricks, or are they revised classics?  I honestly don’t know, because it’s the market’s prerogative to pass that judgement.  I can say this though: based on today’s show, I think Microsoft’s been doing its homework.

  Read the article

• Updating a database connection password using a script

  - by Tim Dexter

  An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

  Read the article

• How to tell whether your programmers are under-performing?

  - by A Team Lead

  I am a team lead with 5+ developers. I have a developer (let's call him A) who is a good programmer, who writes good clean, easy to understand code. However he is somewhat difficult to manage, and sometimes I wonder whether he is really under-performing or not. Our company requires the developers to indicate the work progress in the bug tracker we use, not so much as to monitor the programmers but to let the stackholders know the progress. The thing is, A only updates a task progress when it is done ( maybe 3 weeks after it is first worked on) and this leaves everyone wondering what is going on in the middle of the development week. He wouldn't change his habit despite repeated probing. ( It's OK, developers hate paperwork, I do, too) Recent 2-3 months he on leave quite often due to various events-- either he is sick, or have to attend a lot of personal events etc. ( It's OK, bad things happen in a string. It's just a coincidence) We define sprints, or roadmaps for each month. And in the beginning of the sprint, we will discuss the amount of work each of the developers have to do in a sprint and the developers get to set the amount of time they need for each task. He usually won't be able to complete all of them. (It's OK, the developers are regularly missing deadlines not due to their fault). If only one or two of the above events happen, I won't feel that A is under-performing, but they all happen together. So I have the feeling that A is under-performing and maybe-- God forbid--- slacking off. This is just a feeling based on my years of experience as programmer. But I could be wrong. It is notoriously hard to measure the work of a programmer, given that not all two tasks are alike, and there lacks a standard objective to measure the commitment of a programmer to your company. It is downright impossible to tell whether the programmer is doing his job or slacking off. All you can do, is to trust them-- yeah, trusting and giving them autonomy is the best way for programmers to work, I know that, so don't start a lecture on why you need to trust your programmers, thank you every much-- but if they abuse your trust, can you know? My question is, how can you tell whether your programmers are under-performing? Surely there are experience team leads who know better than me on this? Outcome: I've a straight talk with him regarding my perception on his performance. He was indignant when I suggested that I had the feeling that he wasn't performing at his best level. He felt that this was a completely unfair feeling. I then replied that this was my feeling and I didn't know whether my feeling was right or not. He would have none of this and ended the discussion immediately. Before he left he said that he "would try to give more to the company" in a very cold tone. I was taken aback by his reaction. I am sure that I offended him in some ways. Not too sure whether that was the right thing to do for me to be so frank with him, though. Extra notes: I hate micromanaging. So all that we have for our software process is Sprint ( where tasks get prioritized and assigned, and at the end of the month, a review of the amount of work done). Developers would require to update the tasks as they go along everyday. There is no standup meeting, or anything of the sort. Mainly because we have the freedom to work from home and everyone cherishes this freedom. Although I am the one who sets the deadline, but the developers will provide the estimate for each tasks and I will decide-- based on the estimate-- the tasks that go into a particular sprint. If they can't finish the tasks at the end of the sprint, I will push them to the next. So theoretically one can just do only 1 or 2 tasks during the whole sprint and then push the remaining 99 tasks to the next sprint and still he will be fine as long as justifies this-- in the form of daily work progress updates

  Read the article

• GameplayScreen does not contain a definition for GraphicsDevice

  - by Dave Voyles

  Long story short: I'm trying to intergrate my game with Microsoft's Game State Management. In doing so I've run into some errors, and the latest one is in the title. I'm not able to display my HUD for the reasons listed above. Previously, I had much of my code in my Game.cs class, but the GSM has a bit of it in Game1, and most of what you have drawn for the main screen in your GameplayScreen class, and that is what is causing confusion on my part. I've created an instance of the GameplayScreen class to be used in the HUD class (as you can see below). Before integrating with the GSM however, I created an instance of my Game class, and all worked fine. It seems that I need to define my graphics device somewhere, but I am not sure of where exactly. I've left some code below to help you understand. public class GameStateManagementGame : Microsoft.Xna.Framework.Game { #region Fields GraphicsDeviceManager graphics; ScreenManager screenManager; // Creates a new intance, which is used in the HUD class public static Game Instance; // By preloading any assets used by UI rendering, we avoid framerate glitches // when they suddenly need to be loaded in the middle of a menu transition. static readonly string[] preloadAssets = { "gradient", }; #endregion #region Initialization /// <summary> /// The main game constructor. /// </summary> public GameStateManagementGame() { Content.RootDirectory = "Content"; graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; graphics.IsFullScreen = false; graphics.ApplyChanges(); // Create the screen manager component. screenManager = new ScreenManager(this); Components.Add(screenManager); // Activate the first screens. screenManager.AddScreen(new BackgroundScreen(), null); //screenManager.AddScreen(new MainMenuScreen(), null); screenManager.AddScreen(new PressStartScreen(), null); } namespace Pong { public class HUD { public void Update(GameTime gameTime) { // Used in the Draw method titleSafeRectangle = new Rectangle (GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.X, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Y, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Width, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Height); } } } class GameplayScreen : GameScreen { #region Fields ContentManager content; public static GameStates gamestate; private GraphicsDeviceManager graphics; public int screenWidth; public int screenHeight; private Texture2D backgroundTexture; private SpriteBatch spriteBatch; private Menu menu; private SpriteFont arial; private HUD hud; Animation player; // Creates a new intance, which is used in the HUD class public static GameplayScreen Instance; public GameplayScreen() { TransitionOnTime = TimeSpan.FromSeconds(1.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } protected void Initialize() { lastScored = false; menu = new Menu(); resetTimer = 0; resetTimerInUse = true; ball = new Ball(content, new Vector2(screenWidth, screenHeight)); SetUpMulti(); input = new Input(); hud = new HUD(); // Places the powerup animation inside of the surrounding box // Needs to be cleaned up, instead of using hard pixel values player = new Animation(content.Load<Texture2D>(@"gfx/powerupSpriteSheet"), new Vector2(103, 44), 64, 64, 4, 5); // Used by for the Powerups random = new Random(); vec = new Vector2(100, 50); vec2 = new Vector2(100, 100); promptVec = new Vector2(50, 25); timer = 10000.0f; // Starting value for the cooldown for the powerup timer timerVector = new Vector2(10, 10); //JEP - one time creation of powerup objects playerOnePowerup = new Powerup(); playerOnePowerup.Activated += PowerupActivated; playerOnePowerup.Deactivated += PowerupDeactivated; playerTwoPowerup = new Powerup(); playerTwoPowerup.Activated += PowerupActivated; playerTwoPowerup.Deactivated += PowerupDeactivated; //JEP - moved from events since these only need set once activatedVec = new Vector2(100, 125); deactivatedVec = new Vector2(100, 150); powerupReady = false; }

  Read the article

• Extended FindWindow

  - by João Angelo

  The Win32 API provides the FindWindow function that supports finding top-level windows by their class name and/or title. However, the title search does not work if you are trying to match partial text at the middle or the end of the full window title. You can however implement support for these extended search features by using another set of Win32 API like EnumWindows and GetWindowText. A possible implementation follows: using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; public class WindowInfo { private IntPtr handle; private string className; internal WindowInfo(IntPtr handle, string title) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); this.Handle = handle; this.Title = title ?? string.Empty; } public string Title { get; private set; } public string ClassName { get { if (className == null) { className = GetWindowClassNameByHandle(this.Handle); } return className; } } public IntPtr Handle { get { if (!NativeMethods.IsWindow(this.handle)) throw new InvalidOperationException("The handle is no longer valid."); return this.handle; } private set { this.handle = value; } } public static WindowInfo[] EnumerateWindows() { var windows = new List<WindowInfo>(); NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { windows.Add(new WindowInfo(hwnd, GetWindowTextByHandle(hwnd))); return true; }; bool succeeded = NativeMethods.EnumWindows(processor, IntPtr.Zero); if (!succeeded) return new WindowInfo[] { }; return windows.ToArray(); } public static WindowInfo FindWindow(Predicate<WindowInfo> predicate) { WindowInfo target = null; NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { var current = new WindowInfo(hwnd, GetWindowTextByHandle(hwnd)); if (predicate(current)) { target = current; return false; } return true; }; NativeMethods.EnumWindows(processor, IntPtr.Zero); return target; } private static string GetWindowTextByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); int length = NativeMethods.GetWindowTextLength(handle); if (length == 0) return string.Empty; var buffer = new StringBuilder(length + 1); NativeMethods.GetWindowText(handle, buffer, buffer.Capacity); return buffer.ToString(); } private static string GetWindowClassNameByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); const int WindowClassNameMaxLength = 256; var buffer = new StringBuilder(WindowClassNameMaxLength); NativeMethods.GetClassName(handle, buffer, buffer.Capacity); return buffer.ToString(); } } internal class NativeMethods { public delegate bool EnumWindowsProcessor(IntPtr hwnd, IntPtr lParam); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool EnumWindows( EnumWindowsProcessor lpEnumFunc, IntPtr lParam); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowText( IntPtr hWnd, StringBuilder lpString, int nMaxCount); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowTextLength(IntPtr hWnd); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetClassName( IntPtr hWnd, StringBuilder lpClassName, int nMaxCount); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool IsWindow(IntPtr hWnd); } The access to the windows handle is preceded by a sanity check to assert if it’s still valid, but if you are dealing with windows out of your control then the window can be destroyed right after the check so it’s not guaranteed that you’ll get a valid handle. Finally, to wrap this up a usage, example: static void Main(string[] args) { var w = WindowInfo.FindWindow(wi => wi.Title.Contains("Test.docx")); if (w != null) { Console.Write(w.Title); } }

  Read the article

• Silverlight Reporting Application Part 3.5 - Prism Background and WCF RIA [Series Intermission]

  Taking a step back before I dive into the details and full-on coding fun, I wanted to once again respond to a comment on my last post to clear up some things in regards to how I'm setting up my project and some of the choices I've made. Aka, thanks Ben. :) Prism Project Setup For starters, I'm not the ideal use case for a Prism application. In most cases where you've got a one-man team, Prism can be overkill as it is more intended for large teams who are geographically dispersed or in applications that have a larger scale than my Recruiting application in which you'll greatly benefit from modularity, delayed loading of xaps, etc. What Prism offers, though, is a manner for handling UI, commands, and events with the idea that, through a modular approach in which no parts really need to know about one another, I can update this application bit by bit as hiring needs change or requirements differ between offices without having to worry that changing something in the Jobs module will break something in, say, the Scheduling module. All that being said, here's a look at how our project breakdown for Recruit (MVVM/Prism implementation) looks: This could be a little misleading though, as each of those modules is actually another project in the overall Recruit solution. As far as what the projects actually are, that looks a bit like this: Recruiting Solution Recruit (Shell up there) - Main Silverlight Application .Web - Default .Web application to host the Silverlight app Infrastructure - Silverlight Class Library Project Modules - Silverlight Class Library Projects Infrastructure &Modules The Infrastructure project is probably something you'll see to some degree in any composite application. In this application, it is going to contain custom commands (you'll see the joy of these in a post or two down the road), events, helper classes, and any custom classes I need to share between different modules. Think of this as a handy little crossroad between any parts of your application. Modules on the other hand are the bread and butter of this application. Besides the shell, which holds the UI skeleton, and the infrastructure, which holds all those shared goodies, the modules are self-contained bundles of functionality to handle different concerns. In my scenario, I need a way to look up and edit Jobs, Applicants, and Schedule interviews, a Notification module to handle telling the user when different things are happening (i.e., loading from database), and a Menu to control interaction and moving between different views. All modules are going to follow the following pattern: The module class will inherit from IModule and handle initialization and loading the correct view into the correct region, whereas the Views and ViewModels folders will contain paired Silverlight user controls and ViewModel class backings. WCF RIA Services Since we've got all the projects in a single solution, we did not have to go the route of creating a WCR RIA Services Class Library. Every module has it's WCF RIA link back to the main .Web project, so the single Linq-2-SQL (yes, I said Linq-2-SQL, but I'll soon be switching to OpenAccess due to the new visual designer) context I'm using there works nicely with the scope of my project. If I were going for completely separating this project out and doing different, dynamically loaded elements, I'd probably go for the separate class library. Hope that clears that up. In the future though, I will be using that in a project that I've got in the "when I've got enough time to work on this" pipeline, so we'll get into that eventually- and hopefully when WCF RIA is in full release! Why Not use Silverlight Navigation/Business Template? The short answer- I'm a creature of habit, and having used Silverlight for a few years now, I'm used to doing lots of things manually. :) Plus, starting with a blank slate of a project I'm able to set up things exactly as I want them to be. In this case, rather than the navigation frame we would see in one of the templates, the MainRegion/ContentControl is working as our main navigation window. In many cases I will use theSilverlight navigation template to start things off, however in this case I did not need those features so I opted out of using that. Next time when I actually hit post #4, we're going to get into the modules and starting to get functionality into this application. Next week is also release week for the Q1 2010 release, so be sure to check out our annualWebinar Week (I might be biased, but Wednesday is my favorite out of the group). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Specs, Form and Function – What am I Missing?

  - by Barry Shulam

  0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

  Read the article

• XmlWriter and lower ASCII characters

  - by Rick Strahl

  Ran into an interesting problem today on my CodePaste.net site: The main RSS and ATOM feeds on the site were broken because one code snippet on the site contained a lower ASCII character (CHR(3)). I don't think this was done on purpose but it was enough to make the feeds fail. After quite a bit of debugging and throwing in a custom error handler into my actual feed generation code that just spit out the raw error instead of running it through the ASP.NET MVC and my own error pipeline I found the actual error. The lovely base exception and error trace I got looked like this: Error: '', hexadecimal value 0x03, is an invalid character. at System.Xml.XmlUtf8RawTextWriter.InvalidXmlChar(Int32 ch, Byte* pDst, Boolean entitize)at System.Xml.XmlUtf8RawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)at System.Xml.XmlUtf8RawTextWriter.WriteString(String text)at System.Xml.XmlWellFormedWriter.WriteString(String text)at System.Xml.XmlWriter.WriteElementString(String localName, String ns, String value)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItemContents(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItem(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItems(XmlWriter writer, IEnumerable`1 items, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteFeed(XmlWriter writer)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteTo(XmlWriter writer)at CodePasteMvc.Controllers.ApiControllerBase.GetFeed(Object instance) in C:\Projects2010\CodePaste\CodePasteMvc\Controllers\ApiControllerBase.cs:line 131 XML doesn't like extended ASCII Characters It turns out the issue is that XML in general does not deal well with lower ASCII characters. According to the XML spec it looks like any characters below 0x09 are invalid. If you generate an XML document in .NET with an embedded &#x3; entity (as mine did to create the error above), you tend to get an XML document error when displaying it in a viewer. For example, here's what the result of my  feed output looks like with the invalid character embedded inside of Chrome which displays RSS feeds as raw XML by default: Other browsers show similar error messages. The nice thing about Chrome is that you can actually view source and jump down to see the line that causes the error which allowed me to track down the actual message that failed. If you create an XML document that contains a 0x03 character the XML writer fails outright with the error: '', hexadecimal value 0x03, is an invalid character. The good news is that this behavior is overridable so XML output can at least be created by using the XmlSettings object when configuring the XmlWriter instance. In my RSS configuration code this looks something like this:MemoryStream ms = new MemoryStream(); var settings = new XmlWriterSettings() { CheckCharacters = false }; XmlWriter writer = XmlWriter.Create(ms,settings); and voila the feed now generates. Now generally this is probably NOT a good idea, because as mentioned above these characters are illegal and if you view a raw XML document you'll get validation errors. Luckily though most RSS feed readers however don't care and happily accept and display the feed correctly, which is good because it got me over an embarrassing hump until I figured out a better solution. How to handle extended Characters? I was glad to get the feed fixed for the time being, but now I was still stuck with an interesting dilemma. CodePaste.net accepts user input for code snippets and those code snippets can contain just about anything. This means that ASP.NET's standard request filtering cannot be applied to this content. The code content displayed is encoded before display so for the HTML end the CHR(3) input is not really an issue. While invisible characters are hardly useful in user input it's not uncommon that odd characters show up in code snippets. You know the old fat fingering that happens when you're in the middle of a coding session and those invisible characters do end up sometimes in code editors and then end up pasted into the HTML textbox for pasting as a Codepaste.net snippet. The question is how to filter this text? Looking back at the XML Charset Spec it looks like all characters below 0x20 (space) except for 0x09 (tab), 0x0A (LF), 0x0D (CR) are illegal. So applying the following filter with a RegEx should work to remove invalid characters:string code = Regex.Replace(item.Code, @"[\u0000-\u0008,\u000B,\u000C,\u000E-\u001F]", ""); Applying this RegEx to the code snippet (and title) eliminates the problems and the feed renders cleanly.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  XML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Computer Networks UNISA - Chap 8 &ndash; Wireless Networking

  - by MarkPearl

  After reading this section you should be able to Explain how nodes exchange wireless signals Identify potential obstacles to successful transmission and their repercussions, such as interference and reflection Understand WLAN architecture Specify the characteristics of popular WLAN transmission methods including 802.11 a/b/g/n Install and configure wireless access points and their clients Describe wireless MAN and WAN technologies, including 802.16 and satellite communications The Wireless Spectrum All wireless signals are carried through the air by electromagnetic waves. The wireless spectrum is a continuum of the electromagnetic waves used for data and voice communication. The wireless spectrum falls between 9KHZ and 300 GHZ. Characteristics of Wireless Transmission Antennas Each type of wireless service requires an antenna specifically designed for that service. The service’s specification determine the antenna’s power output, frequency, and radiation pattern. A directional antenna issues wireless signals along a single direction. An omnidirectional antenna issues and receives wireless signals with equal strength and clarity in all directions The geographical area that an antenna or wireless system can reach is known as its range Signal Propagation LOS (line of sight) uses the least amount of energy and results in the reception of the clearest possible signal. When there is an obstacle in the way, the signal may… pass through the object or be obsrobed by the object or may be subject to reflection, diffraction or scattering. Reflection – waves encounter an object and bounces off it. Diffraction – signal splits into secondary waves when it encounters an obstruction Scattering – is the diffusion or the reflection in multiple different directions of a signal Signal Degradation Fading occurs as a signal hits various objects. Because of fading, the strength of the signal that reaches the receiver is lower than the transmitted signal strength. The further a signal moves from its source, the weaker it gets (this is called attenuation) Signals are also affected by noise – the electromagnetic interference) Interference can distort and weaken a wireless signal in the same way that noise distorts and weakens a wired signal. Frequency Ranges Older wireless devices used the 2.4 GHZ band to send and receive signals. This had 11 communication channels that are unlicensed. Newer wireless devices can also use the 5 GHZ band which has 24 unlicensed bands Narrowband, Broadband, and Spread Spectrum Signals Narrowband – a transmitter concentrates the signal energy at a single frequency or in a very small range of frequencies Broadband – uses a relatively wide band of the wireless spectrum and offers higher throughputs than narrowband technologies The use of multiple frequencies to transmit a signal is known as spread-spectrum technology. In other words a signal never stays continuously within one frequency range during its transmission. One specific implementation of spread spectrum is FHSS (frequency hoping spread spectrum). Another type is known as DSS (direct sequence spread spectrum) Fixed vs. Mobile Each type of wireless communication falls into one of two categories Fixed – the location of the transmitted and receiver do not move (results in energy saved because weaker signal strength is possible with directional antennas) Mobile – the location can change WLAN (Wireless LAN) Architecture There are two main types of arrangements Adhoc – data is sent directly between devices – good for small local devices Infrastructure mode – a wireless access point is placed centrally, that all devices connect with 802.11 WLANs The most popular wireless standards used on contemporary LANs are those developed by IEEE’s 802.11 committee. Over the years several distinct standards related to wireless networking have been released. Four of the best known standards are also referred to as Wi-Fi. They are…. 802.11b 802.11a 802.11g 802.11n These four standards share many characteristics. i.e. All 4 use half duplex signalling Follow the same access method Access Method 802.11 standards specify the use of CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) to access a shared medium. Using CSMA/CA before a station begins to send data on an 802.11 network, it checks for existing wireless transmissions. If the source node detects no transmission activity on the network, it waits a brief period of time and then sends its transmission. If the source does detect activity, it waits a brief period of time before checking again. The destination node receives the transmission and, after verifying its accuracy, issues an acknowledgement (ACT) packet to the source. If the source receives the ACK it assumes the transmission was successful, – if it does not receive an ACK it assumes the transmission failed and sends it again. Association Two types of scanning… Active – station transmits a special frame, known as a prove, on all available channels within its frequency range. When an access point finds the probe frame, it issues a probe response. Passive – wireless station listens on all channels within its frequency range for a special signal, known as a beacon frame, issued from an access point – the beacon frame contains information necessary to connect to the point. Re-association occurs when a mobile user moves out of one access point’s range and into the range of another. Frames Read page 378 – 381 about frames and specific 802.11 protocols Bluetooth Networks Sony Ericson originally invented the Bluetooth technology in the early 1990s. In 1998 other manufacturers joined Ericsson in the Special Interest Group (SIG) whose aim was to refine and standardize the technology. Bluetooth was designed to be used on small networks composed of personal communications devices. It has become popular wireless technology for communicating among cellular telephones, phone headsets, etc. Wireless WANs and Internet Access Refer to pages 396 – 402 of the textbook for details.

  Read the article

• Data management in unexpected places

  - by Ashok_Ora

  Normal 0 false false false EN-US X-NONE X-NONE Data management in unexpected places When you think of network switches, routers, firewall appliances, etc., it may not be obvious that at the heart of these kinds of solutions is an engine that can manage huge amounts of data at very high throughput with low latencies and high availability. Consider a network router that is processing tens (or hundreds) of thousands of network packets per second. So what really happens inside a router? Packets are streaming in at the rate of tens of thousands per second. Each packet has multiple attributes, for example, a destination, associated SLAs etc. For each packet, the router has to determine the address of the next “hop” to the destination; it has to determine how to prioritize this packet. If it’s a high priority packet, then it has to be sent on its way before lower priority packets. As a consequence of prioritizing high priority packets, lower priority data packets may need to be temporarily stored (held back), but addressed fairly. If there are security or privacy requirements associated with the data packet, those have to be enforced. You probably need to keep track of statistics related to the packets processed (someone’s sure to ask). You have to do all this (and more) while preserving high availability i.e. if one of the processors in the router goes down, you have to have a way to continue processing without interruption (the customer won’t be happy with a “choppy” VoIP conversation, right?). And all this has to be achieved without ANY intervention from a human operator – the router is most likely to be in a remote location – it must JUST CONTINUE TO WORK CORRECTLY, even when bad things happen. How is this implemented? As soon as a packet arrives, it is interpreted by the receiving software. The software decodes the packet headers in order to determine the destination, kind of packet (e.g. voice vs. data), SLAs associated with the “owner” of the packet etc. It looks up the internal database of “rules” of how to process this packet and handles the packet accordingly. The software might choose to hold on to the packet safely for some period of time, if it’s a low priority packet. Ah – this sounds very much like a database problem. For each packet, you have to minimally · Look up the most efficient next “hop” towards the destination. The “most efficient” next hop can change, depending on latency, availability etc. · Look up the SLA and determine the priority of this packet (e.g. voice calls get priority over data ftp) · Look up security information associated with this data packet. It may be necessary to retrieve the context for this network packet since a network packet is a small “slice” of a session. The context for the “header” packet needs to be stored in the router, in order to make this work. · If the priority of the packet is low, then “store” the packet temporarily in the router until it is time to forward the packet to the next hop. · Update various statistics about the packet. In most cases, you have to do all this in the context of a single transaction. For example, you want to look up the forwarding address and perform the “send” in a single transaction so that the forwarding address doesn’t change while you’re sending the packet. So, how do you do all this? Berkeley DB is a proven, reliable, high performance, highly available embeddable database, designed for exactly these kinds of usage scenarios. Berkeley DB is a robust, reliable, proven solution that is currently being used in these scenarios. First and foremost, Berkeley DB (or BDB for short) is very very fast. It can process tens or hundreds of thousands of transactions per second. It can be used as a pure in-memory database, or as a disk-persistent database. BDB provides high availability – if one board in the router fails, the system can automatically failover to another board – no manual intervention required. BDB is self-administering – there’s no need for manual intervention in order to maintain a BDB application. No need to send a technician to a remote site in the middle of nowhere on a freezing winter day to perform maintenance operations. BDB is used in over 200 million deployments worldwide for the past two decades for mission-critical applications such as the one described here. You have a choice of spending valuable resources to implement similar functionality, or, you could simply embed BDB in your application and off you go! I know what I’d do – choose BDB, so I can focus on my business problem. What will you do? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• PanelGridLayout - A Layout Revolution

  - by Duncan Mills

  With the most recent 11.1.2 patchset (11.1.2.3) there has been a lot of excitement around ADF Essentials (and rightly so), however, in all the fuss I didn't want an even more significant change to get missed - yes you read that correctly, a more significant change! I'm talking about the new panelGridLayout component, I can confidently say that this one of the most revolutionary components that we've introduced in 11g, even though it sounds rather boring. To be totally accurate, panelGrid was introduced in 11.1.2.2 but without any presence in the component palette or other design time support, so it was largely missed unless you read the release notes. However in this latest patchset it's finally front and center. Its time to explore - we (really) need to talk about layout.  Let's face it,with ADF Faces rich client, layout is a rather arcane pursuit, once you are a layout master, all bow before you, but it's more of an art than a science, and it is often, in fact, way too difficult to achieve what should (apparently) be a pretty simple. Here's a great example, it's a homework assignment I set for folks I'm teaching this stuff to:  The requirements for this layout are: The header is 80px high, the footer is 30px. These are both fixed.  The first section of the header containing the logo is 180px wide The logo is centered within the top left hand corner of the header  The title text is start aligned in the center zone of the header and will wrap if the browser window is narrowed. It should be aligned in the center of the vertical space  The about link is anchored to the right hand side of the browser with a 20px gap and again is center aligned vertically. It will move as the browser window is reduced in width. The footer has a right aligned copyright statement, again middle aligned within a 30px high footer region and with a 20px buffer to the right hand edge. It will move as the browser window is reduced in width. All remaining space is given to a central zone, which, in this case contains a panelSplitter. Expect that at some point in time you'll need a separate messages line in the center of the footer.  In the homework assigment I set I also stipulate that no inlineStyles can be used to control alignment or margins and no use of other taglibs (e.g. JSF HTML or Trinidad HTML). So, if we take this purist approach, that basic page layout (in my stock solution) requires 3 panelStretchLayouts, 5 panelGroupLayouts and 4 spacers - not including the spacer I use for the logo and the contents of the central zone splitter - phew! The point is that even a seemingly simple layout needs a bit of thinking about, particulatly when you consider strechting and browser re-size behavior. In fact, this little sample actually teaches you much of what you need to know to become vaguely competant at layouts in the framework. The underlying result of "the way things are" is that most of us reach for panelStretchLayout before even finishing the first sip of coffee as we embark on a new page design. In fact most pages you will see in any moderately complex ADF page will basically be nested panelStretchLayouts and panelGroupLayouts, sometimes many, many levels deep. So this is a problem, we've known this for some time and now we have a good solution. (I should point out that the oft-used Trinidad trh tags are not a particularly good solution as you're tie-ing yourself to an HTML table based layout in that case with a host of attendent issues in resize and bi-di behavior, but I digress.) So, tadaaa, I give to you panelGridLayout. PanelGrid, as the name suggests takes a grid like (dare I say slightly gridbag-like) approach to layout, dividing your layout into rows and colums with margins, sizing, stretch behaviour, colspans and rowspans all rolled in, all without the use of inlineStyle. As such, it provides for a much more powerful and consise way of defining a layout such as the one above that is actually simpler and much more logical to design. The basic building blocks are the panelGridLayout itself, gridRow and gridCell. Your content sits inside the cells inside the rows, all helpfully allowing both streching, valign and halign definitions without the need to nest further panelGroupLayouts. So much simpler!  If I break down the homework example above my nested comglomorate of 12 containers and spacers can be condensed down into a single panelGrid with 3 rows and 5 cell definitions (39 lines of source reduced to 24 in the case of the sample). What's more, the actual runtime representation in the browser DOM is much, much simpler, and clean, with basically one DIV per cell (Note that just because the panelGridLayout semantics looks like an HTML table does not mean that it's rendered that way!) . Another hidden benefit is the runtime cost. Because we can use a single layout to achieve much more complex geometries the client side layout code inside the browser is having to work a lot less. This will be a real benefit if your application needs to run on lower powered clients such as netbooks or tablets. So, it's time, if you're on 11.1.2.2 or above, to smile warmly at your panelStretchLayouts, wrap the blanket around it's knees and wheel it off to the Sunset Retirement Home for a well deserved rest. There's a new kid on the block and it wants to be your friend. 

  Read the article

• WEBLOGIC 12C HANDS-ON BOOTCAMP

  - by agallego

    Oracle PartnerNetwork | Account | Feedback   JOIN THE ORACLE WEBLOGIC PARTNER COMMUNITY AND ATTEND A WEBLOGIC 12C HANDS-ON BOOTCAMP Dear partner As a valued partner we would like to invite you for the WebLogic Partner Community and our WebLogic 12c hands-on Bootcamps – free of charge! Please first login at http://partner.oracle.com and then visit: WebLogic Partner Community. (If you need support with your account please contact the Oracle Partner Business Center). The goal of the WebLogic Partner Community is to provide you with the latest information on Oracle's offerings and to facilitate the exchange of experience within community members. Register Now FREE Assessment vouchers to become certified and WebLogic Server 12c 200 new Features and Training Connect and Network   WebLogic Blogs   WebLogic on Facebook   WebLogic on LinkedIn   WebLogic on Twitter   WebLogic on Oracle Mix WebLogic 12c hands-on Workshops We offer free3 days hands-on WebLogic 12c workshops for Oracle partners who want to become Application Grid Specialized: Register Here! Country Date Location Registration   Germany  3-5 April 2012 Oracle Düsseldorf Click here   France  24-26 April 2012 Oracle Colombes Click here   Spain 08-10 May 2012  Oracle Madrid  Click here   Netherlands  22-24 May 2012  Oracle Amsterdam  Click here   United Kingdom  06-08 June 2012  Oracle Reading  Click here   Italy  19-21 June 2012  Oracle Cinisello Balsamo  Click here   Portugal  10-12 July 2012  Oracle Lisbon  Click here Skill requirements Attendees need to have the following skills as this is required by the product-set and to make sure they get the most out of the training: Basic knowledge in Java and JavaEE Understanding the Application Server concept Basic knowledge in older releases of WebLogic Server would be beneficial Member of WebLogic Partner Community for registration please vist http://www.oracle.com/partners/goto/wls-emea Hardware requirements Every participant works on his own notebook. The minimal hardware requirements are: 4Gb physical RAM (we will boot the image with 2Gb RAM)  dual core CPU 15 GB HD Software requirements Please install Oracle VM VirtualBox 4.1.8 Follow-up and certification  With the workshop registration you agree to the following next steps Follow-up training attend and pass the Oracle Application Grid Certified Implementation Specialist Registration For details and registration please visit Register Here Free WebLogic Certification (Free assessment voucher to become certified) For all WebLogic experts, we offer free vouchers worth $195 for the Oracle Application Grid Certified Implementation Specialist assessment. To demonstrate your WebLogic knowledge you first have to pass the free online assessment Oracle Application Grid PreSales Specialist. For free vouchers, please send an e-mail with the screenshot of your Oracle Application Grid PreSales certirficate to [email protected] including your Name, Company, E-mail and Country. Note: This offer is limited to partners from Europe Middle East and Africa. Partners from other countries please contact your Oracle partner manager. WebLogic Specialization To become specialized in Application Grid, please make sure that you access the: Application Grid Specialization Guide Application Grid Specialization Checklist If you have any questions please contact the Oracle Partner Business Center. Oracle WebLogic Server 12c Key New Capabilities Java EE 6 and Developer Productivity Simplified Deployment and Management with Virtualization Integrated Traffic Management Enhanced High Availability and Disaster Recovery Much Higher Performance For more information please visit: Presentation from the WebLogic 12c launch Technical Presentation from the WebLogic 12c launch WebLogic OTN Website WebLogic 12c Virtual Conference Environment WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea (OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Best regards, Jürgen Kress WebLogic Partner Adoption EMEA Tel. +49 89 1430 1479 E-Mail: [email protected]   Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Statement Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time. Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

  Read the article

• Private Cloud: Putting some method behind the madness

  - by Sudip Datta

  Finally, I decided to join the blogging community. And what could be a better time to start than the week after OpenWorld 2012. 50K+ attendees, demonstrations, speaker sessions and a whole lot of buzz on Oracle Cloud..It was raining clouds in this year's Openworld. I am not here to write about Oracle's cloud strategy in general, but on Enterprise Manager's cloud management capabilities. This year's Openworld was the first after we announced the 12c Cloud Control and we were happy to share the stage with quite a few early adopters. Stay tuned for videos from our customers and partners, I will post them as they get published. I met a number of platform administrators in Oracle-DBAs, Middleware Admins, SOA Admins...The cloud has affected them all, at least to the point where it beckoned more than just curiosity..Most IT infrastructure are already heavily virtualized (on VMWare and on others including Oracle VM), and some would claim they are already on “cloud” (at least their Sysadmins told them so). But none of them were confident of the benefits because their pain points continued to grow.. Isn't cloud supposed to ease those? Instead, they were chasing hundreds of databases running on hundreds of VMs, often with as much certainty propounded by Heisenberg. What happened to the age-old IT discipline around administration, compliance, configuration management? VMs are great for what they are. I personally think they have opened the doors to new approaches in which an application stack gets provisioned and updated. In fact, Enterprise Manager 12c is possibly the only tool out there that can provision full-fledged application as VM Assemblies. In this year's Openworld, customers talked on how they provisioned RAC and Siebel assemblies, which as the techies out there know, are not trivial (hearing provisioning time for Siebel down from weeks to hours was gratifying indeed). However, I do have an issue with a "one-size fits all" approach to cloud. In a week's span, I met several personas: Project owners requiring an EC2 like VM instance for their projects Admins needing the same for Sparc-Solaris. DBAs requiring dedicated databases for new projects APEX Developers needing just a ready-to-consume schema as a service Java Developers looking for a runtime platform QA engineers needing a fast clone of their production environment If you drill down further, you will end up peeling more layers of the details. For example, the requirements for Load testing and Functional testing are very different. For Load testing the test environment should ideally be the same as the production. You shouldn't run production on Exadata and load test on a VM; they will just not be good representations of one another. For Functional testing it does not possibly matter. DBAs seem to be at the worst affected of the lot. It seems they have been asked to choose between agile provisioning and  faster runtime performance. And in some cases, it is really a Hobson's choice, because their infrastructure provider made no distinction between the OLTP application and the Virtual desktop! Sad indeed. When one looks at the portfolio of services that we already offer (vanilla IaaS, VM Assembly based PaaS, DBaaS) or have announced (Java PaaS, Instant Cloning, Schema-aaS), one can possibly think that we are trying to be the "renaissance man" ! Well I would have possibly digested that had it not been for the various personas that I described above. Getting the use cases right is very important for an application such as cloud management. We iterate and iterate over these over and over again and re-validate them in CABs (Customer Advisory Boards). We consider over the major aspects of tenancy: service placement, resource isolation (can a tenant execute an expensive SQL and run away with all the resources), quota and security. We, in Engineering, keep reminding ourselves that we are dealing with enterprise clouds. We owe it to our customer base ! In the coming posts, I will drill down more into each of the services. In the meanwhile, here are some collateral and  demos for starters with EM 12c. http://www.oracle.com/technetwork/oem/cloud-mgmt/index.html Sudip Datta The views expressed here are my own and do not necessarily reflect the views of Oracle. Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter --

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >