Search Results

Search found 1483 results on 60 pages for 'constantin ff'.

Page 16/60 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Why is my mdadm raid-1 recovery so slow?

    - by dimmer
    On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

    Read the article

  • f12 and ctrl + f5 not working correctly

    - by ComatoseDuck
    When I came back to my work computer after being away for a week I found out when I try to clear the cache and refresh the page via ctrl + f5 (or just f5) I get the prompt "Type the Internet address of a document, and Internet Explorer will open it for you" with a drop down list in IE. When I try f5 in Chrome and FF it opens the "Open file" dialog box. When I try to f12 for Dev tools in IE, Chrome & FF it opens up the print dialog box. Why is this happening and what can I do to revert it back to the way it was?

    Read the article

  • UUID in Mountain Lion

    - by Naji
    I am trying to find my external HDD UUID in Mountain Lion but diskutil info /dev/disk1s1 returns: Najis-MacBook-Air:~ ****$ diskutil info disk1s1 Device Identifier: disk1s1 Device Node: /dev/disk1s1 Part of Whole: disk1 Device / Media Name: Untitled 1 Volume Name: My Book Escaped with Unicode: My%FF%FE%20%00Book Mounted: Yes Mount Point: /Volumes/My Book Escaped with Unicode: /Volumes/My%FF%FE%20%00Book File System Personality: NTFS Type (Bundle): ntfs Name (User Visible): Windows NT File System (NTFS) Partition Type: Windows_NTFS OS Can Be Installed: No Media Type: Generic Protocol: USB SMART Status: Not Supported Total Size: 2.0 TB (2000364240896 Bytes) (exactly 3906961408 512-Byte-Blocks) Volume Free Space: 212.5 GB (212506509312 Bytes) (exactly 415051776 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Yes Ejectable: Yes Whole: No Internal: No And there is no UUID. What is wrong exactly? Thank you.

    Read the article

  • Firefox (on windows) constantly consuming 10% CPU - is there an add-in to find the rogue tab?

    - by tbone
    I often have many Firefox windows open, each with many tabs. Now and then one of the tabs will be running a web page that for some reason consumes lots of resources. Right now, I have a tab somewhere that is constantly consuming 10% of the CPU...which would be fine as my computer can easily handle that (see specs below...all other apps are responsive), but it seems to slow Firefox down....everything, everywhere is extremely laggy in Firefox, I can see pauses while I type this. Is there: - a way I can isolate separate instances (or even tabs) in FF into a separate process, so one rogue tab doesn't bog down FF across the entire system? - maybe an add-in that can either identify tabs consuming lots of CPU, or maybe a way to "shut down" activity on tabs you haven't used in a while? Firefox 3.6.10 Windows 7 Ultimate 64 i7 920 @ 3.6 GHz 12 GB Ram

    Read the article

  • How can I install another locale for Firefox?

    - by mfn
    I've installed FF 3.6.3 on a multi-user system with the German language; however I'ld like to have everything in English (interface, etc.) for my user without installing a separate version of FF in english. I've found the setting general.useragent.locale and an extesion, Quick locale switcher, but I don't actually understand where to get the locale from (en_US in my case, I guess). I found pointers directing me to the offical FTP release server with the hint to download the appropriate locale XPI, e.g. from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/ , however there's none.

    Read the article

  • IIS asks for login/pass when accessed using hostname but not when ‘localhost’ is used. Why?

    - by sb
    Hi All, I have setup IIS on my xp machine and have setup a default homepage (that comes with the IIS installed). It is a help page I think. when I access the page with http : // localhost it works fine (IE/Chrome or FF) but when I access it using http://hostname it prompts for a loging/password and works when I enter my domain id and password on the intranet. I have ensured that "anonymous access" is enabled in the properties window of the default site and "websites" node. I searched stack overflow for similar queries but some indicate I need to change the IE/FF settings to allow "integrated security" etc and some suggest to look at the "log file". I don't want to change the IE setting and there is nothing unusual in the log file of the IIS Server. Can anybody help me figure out why this is happening? thank you sb

    Read the article

  • Firefox unable to load SSL Certificate Chain, while Chrome, IE do

    - by FryBurger
    I created a certificate for our IIS 6 by sending a request (created with openssl) to our organization's CA. I already had trouble to integrate the private key into that certificate, that has been solved, see SO question IIS 6.0 now uses the certificate (with TSL v1 and SSL v3), that is the 4th in cert hierarchy. Now, if I access the intranet site, chrome accepts the certificate, so does IE, but Firefox complains about an insecure connection and wants me to add an exceptional rule. If I look into the certificate, how FF presents it to me, I cannot see any of the three issuers. How can this be? If I connect via openssl s_client -showcerts -connect... I only see my own certificate too, which is said to be not verified. I am quite confused now. Where's the mistake and how can I make FF accept certificate without forcing our users to add that exceptionrule? Maybe do I have to add all the three issuer certificates into cert store of the win2003 server that hosts IIS 6.0 ??

    Read the article

  • Broken corba object references

    - by cube
    I'm working on a homework and got stuck. The task is to serve objects using a default servant. But when I try to use the reference, weird things happen. Some part of corba prints a stack trace, but no exception is thrown. The problem happens when the server receives the reference and should call some method on it. The reference is then shortened and doesn't contain the object ID (which means that my servant implementation can't do anything reasonable). This is the implementation of the servant, where the problem appears: public class ModelFileImpl extends ModelFilePOA{ @Override public String getName() { try { return new String(_poa().reference_to_id(_this_object())); } catch (Throwable e) {} assert false; return null; } } If I take _this_object().toString() inside the try block and put it into dior -i i get this: ------IOR components----- TypeId : IDL:termproject/idl/ModelFile:1.0 TAG_INTERNET_IOP Profiles: Profile Id: 0 IIOP Version: 1.2 Host: 127.0.0.1 Port: 45954 Object key (URL): %AF%AB%CB%00%00%00%00%20Q%BA%F4%FF%00%00%00%01%00%00%00%00%00%00%00%01%0000%00%08RootPOA%00%00%00%00%08%00%00%00%02%00%00%00%00%14 Object key (hex): 0xAF AB CB 00 00 00 00 20 51 BA F4 FF 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 08 52 6F 6F 74 50 4F 41 00 00 00 00 08 00 00 00 02 00 00 00 00 14 -- Found 2 Tagged Components-- #0: TAG_CODE_SETS ForChar native code set Id: ISO8859_1 Char Conversion Code Sets: UTF8 , Unknown TCS: 10020 ForWChar native code set Id: UTF16 WChar Conversion Code Sets: Unknown TCS: 10100 Unknown tag : 38 however the part of server that makes the reference and the client see the reference as ------IOR components----- TypeId : IDL:termproject/idl/ModelFile:1.0 TAG_INTERNET_IOP Profiles: Profile Id: 0 IIOP Version: 1.2 Host: 127.0.0.1 Port: 45954 Object key (URL): %AF%AB%CB%00%00%00%00%20Q%BA%F4%FF%00%00%00%01%00%00%00%00%00%00%00%02%00%00%00%08RootPOA%00%00%00%00%09modelPoa%00%00%00%00%00%00%00%10testModel1.MyIDL%14 Object key (hex): 0xAF AB CB 00 00 00 00 20 51 BA F4 FF 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00 08 52 6F 6F 74 50 4F 41 00 00 00 00 09 6D 6F 64 65 6C 50 6F 61 00 00 00 00 00 00 00 10 74 65 73 74 4D 6F 64 65 6C 31 2E 4D 79 49 44 4C 14 -- Found 2 Tagged Components-- #0: TAG_CODE_SETS ForChar native code set Id: ISO8859_1 Char Conversion Code Sets: UTF8 , Unknown TCS: 10020 ForWChar native code set Id: UTF16 WChar Conversion Code Sets: Unknown TCS: 10100 Unknown tag : 38 ("modelPoa" (the name of the poa working with default clients) and "testModel1.MyIDL" (the identifier of the object) in the object key are missing in the first one) I've tried sniffing the traffic and found out that the client still sends the correct reference. This is how i create the references: ret[i] = ModelFileHelper.narrow(modelFilePoa.create_reference_with_id(files[i].getBytes(), ModelFileHelper.id())); And this is how i set up the server: // init ORB ORB orb = ORB.init(args, null); // init POA POA poa = POAHelper.narrow(orb.resolve_initial_references("RootPOA")); // create the POA for the models. Policy[] policies = { poa.create_request_processing_policy(RequestProcessingPolicyValue.USE_DEFAULT_SERVANT), poa.create_servant_retention_policy(ServantRetentionPolicyValue.NON_RETAIN), poa.create_id_assignment_policy(IdAssignmentPolicyValue.USER_ID) }; POA modelPoa = poa.create_POA("modelPoa", poa.the_POAManager(), policies); modelPoa.the_POAManager().activate(); modelPoa.set_servant(new ModelFileImpl()); modelPoa.the_POAManager().activate(); ModelStoreImpl impl = new ModelStoreImpl(modelPoa); // create the object reference org.omg.CORBA.Object obj = poa.servant_to_reference(impl); // ... store the IOR file ... orb.run(); I'd be really grateful for any pointers (or references :-) )

    Read the article

  • Cannot decode complete cipher list in .NET SslStream handshake.

    - by karmasponge
    While attempting to move from a 'C' based SSL implementation to C# using the .NET SslStream and we have run into what look like cipher compatibility issues with the .NET SslStream and a AS400 machine we are trying to connect to (which worked previously). When we call SslStream.AuthenticateAsClient it is sending the following: 16 03 00 00 37 01 00 00 33 03 00 4d 2c 00 ee 99 4e 0c 5d 83 14 77 78 5c 0f d3 8f 8b d5 e6 b8 cd 61 0f 29 08 ab 75 03 f7 fa 7d 70 00 00 0c 00 05 00 0a 00 13 00 04 00 02 00 ff 01 00 Which decodes as (based on http://www.mozilla.org/projects/security/pki/nss/ssl/draft302.txt) [16] Record Type [03 00] SSL Version [00 37] Body length [01] SSL3_MT_CLIENT_HELLO [00 00 33] Length (51 bytes) [03 00] Version number = 768 [4d 2c 00 ee] 4 Bytes unix time [… ] 28 Bytes random number [00] Session number [00 0c] 12 bytes (2 * 6 Cyphers)? [00 05, 00 0a, 00 13, 00 04, 00 02, 00 ff] - [RC4, PBE-MD5-DES, RSA, MD5, PKCS, ???] [01 00] Null compression method The as400 server responds back with: 15 03 00 00 02 02 28 [15] SSL3_RT_ALERT [03 00] SSL Version [00 02] Body Length (2 Bytes) [02 28] 2 = SSL3_RT_FATAL, 40 = SSL3_AD_HANDSHAKE_FAILURE I'm specifically looking to decode the '00 FF' at the end of the cyphers. Have I decoded it correctly? What does, if anything, '00 FF' decode too? I am using the following code to test/reproduce: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Net.Sockets; using System.Net.Security; using System.Security.Authentication; using System.IO; using System.Diagnostics; using System.Security.Cryptography.X509Certificates; namespace TestSslStreamApp { class DebugStream : Stream { private Stream AggregatedStream { get; set; } public DebugStream(Stream stream) { AggregatedStream = stream; } public override bool CanRead { get { return AggregatedStream.CanRead; } } public override bool CanSeek { get { return AggregatedStream.CanSeek; } } public override bool CanWrite { get { return AggregatedStream.CanWrite; } } public override void Flush() { AggregatedStream.Flush(); } public override long Length { get { return AggregatedStream.Length; } } public override long Position { get { return AggregatedStream.Position; } set { AggregatedStream.Position = value; } } public override int Read(byte[] buffer, int offset, int count) { int bytesRead = AggregatedStream.Read(buffer, offset, count); return bytesRead; } public override long Seek(long offset, SeekOrigin origin) { return AggregatedStream.Seek(offset, origin); } public override void SetLength(long value) { AggregatedStream.SetLength(value); } public override void Write(byte[] buffer, int offset, int count) { AggregatedStream.Write(buffer, offset, count); } } class Program { static void Main(string[] args) { const string HostName = "as400"; TcpClient tcpClient = new TcpClient(HostName, 992); SslStream sslStream = new SslStream(new DebugStream(tcpClient.GetStream()), false, null, null, EncryptionPolicy.AllowNoEncryption); sslStream.AuthenticateAsClient(HostName, null, SslProtocols.Ssl3, false); } } }

    Read the article

  • Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E

    - by Sebastian Bugiu
    I had Ubuntu 11.10 and in the last few weeks I experienced an obscure problem: after I had the computer running for a few days I could no longer connect to google.com or anything related to google. All sites worked with all browsers (Firefox, chrome, opera) except google. It remained in the connecting phase for a few minutes and either timed out or finally connected with this huge delay. Even if I entered other sites such as this one, if it had anything to do with google such adsense or gstatic or whatever with g in it, that site took a long time to load waiting in connecting to gstatic.com . Anything google related took minutes to work, but everything else worked instantly! I tried rebooting or using other machine(with windows on it) and this worked, so it's not network related. But after a few days it started not working again... So I upgraded to the Precise Pangolin hoping this behavior would go away. It didn't! After a few days I get the same behavior as in 11.10. What am I supposed to do? Reboot every other day? I didn't have this problem with neither 10.10 or 11.04. I found the Realtek RTL8168/8111E issue with the r8169 driver but this is not exactly the same card so probably trying r8168 won't help. Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Toshiba America Info Systems Device ff1c Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at 4000 [size=256] Memory at d0010000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=64K] Capabilities: [40] Power Management version 7 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Count=2 Masked- Capabilities: [cc] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 09-00-00-00-ff-ff-00-00 Kernel driver in use: r8169 Kernel modules: r8169

    Read the article

  • Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

    - by nightfly
    I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

    Read the article

  • proxychained browser unable to open files

    - by Cocoro Cara
    Ubuntu 10.10, Midori 0.3.2 browser (same problem with Epiphany 2.30.2, Chrome 11.0.686.1 dev; haven't tried with Firefox as yet) Proxychains-3.1 installed, working fine. Here is the deal: when NOT proxychained, Midori or Epiphany can download and open a file (e.g. PDFs from a Google search) in Evince without problem. But when proxychained, neither browser can open PDF files. The message is, "file xxx downloaded". Then it tries to open the file, an indication appears in the status bar, the turning wheel appears, and then nothing. Evince doesn't open. Whats going on here? In both cases (with and without proxychains) files are downloaded to the /tmp folder. They have the same file permissions and ownership. Whats different when proxychained? Why can't the files be opened and why are there no error messages or notifications. Why the silent failure? I don't want to use FF or Chrome. Chrome does not follow my GTK2 customizations and FF is just too resource heavy. Please help.

    Read the article

  • Web browser downloads only open target folders - cannot open files

    - by Pavlos G.
    After installing xubuntu packages in order to check xfce, I reverted back to gnome2. During the first login, I noticed that thunar was now selected as the default file manager. Preferred applications menu is also missing now, so I could not set nautilus as the default. I removed all the xubuntu packages (including thunar) and then when I tried to open a folder, I was asked to select the default file manager - that's how I got nautilus back. The next problem I'm now facing has to do with the downloaded files from web browsers: Open and Open containing folder options produce exactly the same result. If I double-click on a file, it'll just open the containing folder, instead of opening the file with it's associated application (e.g. libreoffice writer for .doc,.odt, smplayer for .avi,.wmv, etc). The problem happens both in Firefox and Chrome. Through nautilus, all files open correctly. Up until now I've tried the following: Delete/recreate mimeTypes.rdf in my FF profile Create a new profile in FF Delete/recreate ~/.local/share/applications/mimeapps.list Already checked this similar article None of them worked. Any ideas on the issue would be appreciated.

    Read the article

  • Site failing randomly - could it be Cloudflare or something weird in the JS?

    - by James
    I've been working on a simple site that uses javascript to fade through some fullscreen background images as well as some other simple animations. I've tested the site on Chrome, Safari, FF and Opera on OSX, IE8+ on Win7 and Chrome & FF on Ubuntu and everything looks as I'd expect it to. However, I've had reports of the site failing to load (stops at the stage where the background fades up) on Safari and Chrome on OSX and Win. I can't replicate this on any setup so I'm finding it impossible to troubleshoot. Google's instant preview shows the site fine as does most of the options at browsershots.org so I'm really scratching my head. I'm running the site's traffic through Cloudflare and I'm wondering whether anyone can see (or knows from other sites) why Cloudflare might be mangling the JS or causing a problem somehow (I don't get any errors in the JS error console). Of course, if you can replicate the problem on your machine and can suggest an area to look at that would be amazing but I'm hoping that, like me, you don't see any problem with the site! Here's the site: http://www.bighornrevelstoke.com Thanks, James

    Read the article

  • AR242x / AR542x wireless card not working

    - by Pipan87
    My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • FreeBSD 8.0 - Macbook: Trying to Connect to Wireless

    - by Koroviev
    What Happened A few days ago I installed FreeBSD 8from USB to my Macbook (Core Duo, 13"). The first thing I wanted to do was get my GUI back. I'm new to FreeBSD and it's my first time off of mac or windows, so I had some learning to do. I tried to a make clean install of xorg with ports but it returned many "No address record" errors. I realised I hadn't configured network settings and then the fun started. I ran ifconfig and it found 5 devices: msk0, ath0, fwe0, fwip0, lo0. * ath0 was identified as media: IEEE 802.11 Wireless Ethernet autoselect so it was clear which one I needed. From what I gathered, there are 3 files and two processes involved here: /boot/loader.conf /etc/wpa_supplicant.conf /etc/rc.conf /etc/rc.d/netif wpa_supplicant (which is a part of the former too) I'm certain it's a big simplification, so correct me if I'm wrong here. What I Tried I configured /boot/loader.conf with the few basic settings, and I'm most sure that this file is okay. The other 2 were more puzzling. I tried to make a network package in wpa_supplicant.conf. I found the ssid of the router, but the security wasn't so easy. The routers configuration on security is set to "Auto", with no explanation given. Other options are there, but Auto is selected. Another laptop uses WEP to connect (it's Vista, so I don't know how to get any more info than that), but I never configured it to do it. There's a string labled "wireless key" on the bottom of the router which I entered to set it up a new machine on the network (Windows and Macs, so it was simplified). I never had to choose a security type and only learned about them by installing FreeBSD. So perhaps WEP is what "Auto" means, but I can't find any other evidence. wpa_supplicant.conf seemed to never be correctly configured. I always got errors related to it and WPA_supplicant doesn't work. It gave me "Can't disable/enable WPA in the driver" errors and more once when I enabled -d -d. This was when I was trying some suspect configurations in rc.conf though. Usually it does nothing except hijack the shell and print "CTRL-SCAN-EVENT-RESULT" every 10 seconds. I learned how to clone the ath0 device to a wlandev interface (wlan0). ath0 is associated to it and their connection seems to go smoothly. But the wlan0's connection to the network is the problem. I couldn't create this with rc.conf, I do something wrong and get ifconfig: create: bad value errors whenever it's parsed. I did it via the shell instead. What Now? I scanned with wlan0 today: ifconfig wlan0 list scan It shows my router, even my neighbour's router. It was a relief to finally get some feedback. So wlan0 is UP and detects the router, but it is always status: no carrier. It can't associate with it and I can't figure out why. Running /etc/rc.d/netif start returns almost the same result as ifconfig would. It shows lo0 and wlan0, and sometimes ath0. I still not sure what lo0 is doing. So; how do I associate with it? We can assume it's WEP security based on how the other laptop is setup. I'll give every relevant output here. After boot, with a blank rc.conf this is what ifconfig returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 I run: ifconfig wlan0 create wlandev ath0 It returns: wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: xx:xx:xx:xx:xx:xx Ifconfig now returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 1 wme burst bintval 0 I run: ifconfig wlan0 up ifconfig wlan0 scan It finds my router and displays its details. I can feed it my routers details now, using: ifconfig wlan0 key value key value ... They show up in wlan0 when I run ifconfig, but it still doesn't associate. What details should I feed it, what exactly is needed? What, if anything, should I have in /etc/wpa_supplicant.conf (and if that psk is needed, is it most likely the string I mentioned above)? If I define the ssid in wpa_supplicant.conf, should I still feed it to wlan0? What process should I then use to associate it? 5 .How should I add these things to rc.conf so it will automatically do this at boot? A huge thank you in advance for any help you can give, I've spent hours crawling about the shell and I've learned quite a bit from it (I finally got the hang of vi too, from all that editing). But the sooner this is fixed, the better. *P.S. I was, and still am, wondering where the extra three devices come from (the wireless and wired were all I expected to find). lo0 is up at each boot and /etc/rc.d/netif, I have no idea what it is and can't find it in dmesg. Resources: /etc/loader.conf: Code: if_ath_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" /etc/wpa_supplicant.conf (I emptied it of everything unnecessary, because I was just causing errors) network={ ssid="BTVOYAGER2110-1C" } /etc/rc.conf has no network settings, I commented them out because of errors. There was my attempt to clone ath0 and feed it info, but I did if via the shell instead. I've included the output of dmesg as an attachment, in case it's useful. I'd include the boot text (which appears before login) but I don't know how to catch it into a text file. If it's needed and somebody tells me how, I will (actually, even if it's not needed, how can I view it to read?).

    Read the article

  • Can't capture https traffic with Fiddler and Firefox (works with IE)

    - by Tony_Henrich
    I am trying to debug an asp.net app using Firefox. Firefox tries to connect to https://www.paypal.com and I get "Secure Connection Failed" error (Error code: sec_error_bad_signature). I installed Fiddler's cert in Firefox and the local computer and current user Cert stores. I set up the manual proxy in FF to 127.0.0.1 and port 8888 and for all protocols. Fiddler captures http traffic but gives an error with https traffic. Fiddler captures https from IE fine. What's the problem? (Is FiddlerHook FF extension needed and what setting should it be using: auto, disabled or Force traffic to Fiddler?)

    Read the article

  • Getting Exception thrown and not caught error on jquery ui tabs in ie8

    - by Jason
    I am getting the following error (pointing to jquery-1.4.2.js): Message: Exception thrown and not caught Line: 2904 Char: 2 Code: 0 With the following: IE8 jquery 1.4.2 jquery ui 1.8.1 When I do the following: $("#theTabs").tabs(); On the same page I also have two instances of the jquery ui dialog and one instance of the jquery ui accordion. Am I missing something? This does not happen in FF on Windows (nor in Safari or FF on OS X) I use the same code elsewhere for tabs and they work just fine.

    Read the article

  • Safari Extjs grid rendering issue

    - by Natkeeran
    Hello: Here is a simple illustration of what I mean. It works in IE, and FF, but not in Safari. I have four panels which are dynamically added to a tabpanel item. Three are grid panels, and one is a form panel. I need to preserve the grids proportions or sizes. I tried several layout methods (table, column, absolute etc), and nothing seems work so far. For table layout, all sizes end up being the same width. It seems my best bet is column layout, and they seem to render properly in FF, IE, but not in Safari as shown in the image. (Here it seems that column goes to second row, when the item does not fit into the current row). Initially, the title bar, and several of the column headings does not show. Any suggestions. Thank you.

    Read the article

  • Overlaying Firefox's new Addon Manager

    - by Erik Vold
    I'm trying to create a conditional overlay for firefox's new addon manager in minefield 3.7 (aka firefox 3.7) I'm trying the following: overlay chrome://mozapps/content/extensions/extensions.xul chrome://greasemonkey/content/addons.xul application={ec8030f7-c20a-464f-9b0e-13a3a9e97384} appversion<3.7 overlay chrome://mozapps/content/extensions/extensions.xul chrome://greasemonkey/content/addonstab.xul application={ec8030f7-c20a-464f-9b0e-13a3a9e97384} appversion>=3.7 And this works for firefox 3.6, but it does not work minefield.. y? Edit: even the following doesn't appear to work in minefield, but does in FF 3.6 (I just made the overlay add a blank css file, an dI can find the css file included in FF 3.6 but not Minefield): overlay chrome://mozapps/content/extensions/extensions.xul chrome://greasemonkey/content/addonstab.xul

    Read the article

  • Resgen al.exe generated resources do not work within .net library

    - by Raj G
    Hi, I am currently working on a library in .Net and I planned to make the strings that are used within the library into culture specific resource files. I made Resources.resx, Resources.en-US.resx and Resources.ja-JP.resx file. I also deleted the Resources.designer.cs file autogenerated by visual studio 2008. I am loading Resources through my custom ResourceManager object [using GetString method]. The problem that I am facing is that when I compile the library within visual studio and set the culture from the calling application, everything is working fine. But if I manually go to the directory and change a string for a culture and regenerate the satellite assembly with resgen and al.exe, the string displayed, falls back to the invariant culture. I have attached the ildasm view of both the dlls en-US generated from within visual studio //Metadata version: v2.0.50727 .assembly extern mscorlib { .publickeytoken = (B7 7A 5C 56 19 34 E0 89 ) // .z\V.4.. .hash = (71 05 4D 54 C4 8D C2 90 7D 8B CF 57 2E B5 98 22 // q.MT....}..W..." F5 5B 2E 06 ) // .[.. .ver 2:0:0:0 } .assembly EmailEngine.resources { .custom instance void [mscorlib]System.Reflection.AssemblyTitleAttribute::.ctor(string) = ( 01 00 0B 45 6D 61 69 6C 45 6E 67 69 6E 65 00 00 ) // ...EmailEngine.. .custom instance void [mscorlib]System.Reflection.AssemblyDescriptionAttribute::.ctor(string) = ( 01 00 FF 00 00 ) .custom instance void [mscorlib]System.Reflection.AssemblyCompanyAttribute::.ctor(string) = ( 01 00 FF 00 00 ) .custom instance void [mscorlib]System.Reflection.AssemblyProductAttribute::.ctor(string) = ( 01 00 0B 45 6D 61 69 6C 45 6E 67 69 6E 65 00 00 ) // ...EmailEngine.. .custom instance void [mscorlib]System.Reflection.AssemblyCopyrightAttribute::.ctor(string) = ( 01 00 12 43 6F 70 79 72 69 67 68 74 20 C2 A9 20 // ...Copyright .. 20 32 30 30 38 00 00 ) // 2008.. .custom instance void [mscorlib]System.Reflection.AssemblyTrademarkAttribute::.ctor(string) = ( 01 00 FF 00 00 ) .custom instance void [mscorlib]System.Reflection.AssemblyFileVersionAttribute::.ctor(string) = ( 01 00 07 31 2E 30 2E 30 2E 30 00 00 ) // ...1.0.0.0.. .hash algorithm 0x00008004 .ver 1:0:0:0 .locale = (65 00 6E 00 2D 00 55 00 53 00 00 00 ) // e.n.-.U.S... } .mresource public 'EmailEngine.Properties.Resources.en-US.resources' { // Offset: 0x00000000 Length: 0x00000111 } .module EmailEngine.resources.dll // MVID: {D030D620-4E59-46F4-94F4-5EA0F9554E67} .imagebase 0x00400000 .file alignment 0x00000200 .stackreserve 0x00100000 .subsystem 0x0003 // WINDOWS_CUI .corflags 0x00000001 // ILONLY // Image base: 0x008B0000 ja-JP generated by me using resgen and al.exe // Metadata version: v2.0.50727 .assembly EmailEngine.resources { .hash algorithm 0x00008004 .ver 0:0:0:0 .locale = (6A 00 61 00 00 00 ) // j.a... } .mresource public 'EmailEngine.Properties.Resources.ja-JP.resources' { // Offset: 0x00000000 Length: 0x0000012F } .module EmailEngine.resources.dll // MVID: {0F470BCD-C36D-4B9F-A8ED-205A0E5A9F6F} .imagebase 0x00400000 .file alignment 0x00000200 .stackreserve 0x00100000 .subsystem 0x0003 // WINDOWS_CUI .corflags 0x00000001 // ILONLY // Image base: 0x007F0000 Can anyone help me as to why these two files are different and what is going on here? Why would the same Japanese resource file work when generated from within visual studio and not when generated using tools. TIA Raj

    Read the article

  • IE8 + Jquery ajax call giving parsererror : for json data which seems valid in Firefox

    - by PlanetUnknown
    The ajax call works fine in FF. the data returned is in JSON here is an example from FF firebug - {"noProfiles": "No profiles have been created, lets start now !"} When I try to print the error in IE8 (& in compatibility modes as well), it says "parsererror". But the output seems to be valid JSON. Here is the ajax function call I'm making. Any pointers would be great ! $.ajax({ type: "GET", url: "/get_all_profile_details/", data: "", dataType: "json", beforeSend: function() {alert("before send called");}, success: function(jsonData) { alert("data received"); }, error: function(xhr, txt, err){ alert("xhr: " + xhr + "\n textStatus: " + txt + "\n errorThrown: " + err); } }); The alerts in the error function above give - xhr:<blank> textstatus:parsererror errorThrown: undefined Any pointers would be great ! Note : jquery : 1.3.2

    Read the article

  • [JavaScript-CSS-Firefox] Cannot change borderColor of TD

    - by Tadeus Prastowo
    Using JS to set the background color of a TD is fine. But, setting the border color is problematic in FF 3.0.18 although IE 6 doesn't experience this. FF is problematic in that it requires the TD element to have an attribute style initialized to border-style: solid. Without that, setting border color of a TD won't work. Is this known bug? How do I set the border color without having to set style attribute as well as the initialization value? I know another trick of setting the class attribute instead of setting the border color directly. Is this an indication that somehow TD hates having its border color set dynamically? Is this known as well? The problematic code is below (the goal is find out why setting the border color of simple truth 1 does not work while simple truth 3 works when I employ the trick described above): <html> <head> <title>Quirks FF 3.0.18</title> <style type="text/css"> table { border-collapse: collapse; } </style> <script type="text/javascript"> function changeBgColor() { document.getElementById('simple').style.backgroundColor='yellow'; document.getElementById('simple2').style.backgroundColor='yellow'; document.getElementById('simple3').style.backgroundColor='yellow'; } function quirk(id) { var x = document.getElementById(id); x.style.border = '2px solid red'; } </script> </head> <body> <input type="button" onclick="changeBgColor()" value="Change background color"/> <input type="button" onclick="quirk('simple')" value="Change border color 1"/> <input type="button" onclick="quirk('simple2')" value="Change border color 2"/> <input type="button" onclick="quirk('simple3')" value="Change border color 3"/> <table> <tr><td id="simple">Simple truth 1</td></tr> </table> <table> <tr><td><span id="simple2">Simple truth 2</span></td></tr> <table> <tr><td id="simple3" style="border-style: solid">Simple truth 3</td></tr> </table> </body> </html>

    Read the article

  • getting firewatir to run on mac osx: jssh problems

    - by z3cko
    I am trying to get firewatir to run on Mac OSX Leopard. I have Firefox 3.6rc2 installed but running the most simple script does not work: require 'rubygems' require 'firewatir' ff=FireWatir::Firefox.new ff.goto("http://mail.yahoo.com") i am getting the following error /usr/local/lib/ruby/gems/1.8/gems/firewatir-1.6.5/lib/firewatir/firefox.rb:237:in `set_defaults': Unable to connect to machine : 127.0.0.1 on port 9997. Make sure that JSSh is properly installed and Firefox is running with '-jssh' option (Watir::Exception::UnableToStartJSShException) from /usr/local/lib/ruby/gems/1.8/gems/firewatir-1.6.5/lib/firewatir/firefox.rb:131:in `initialize' from ./watir-test.rb:12:in `new' from ./watir-test.rb:12 even when I am trying to start Firefox with the -jssh option, I get an error (although another one) /Applications/Firefox.app/Contents/MacOS/firefox-bin -jssh the error output in that case: /usr/local/lib/ruby/gems/1.8/gems/firewatir-1.6.5/lib/firewatir/firefox.rb:125:in `initialize': Firefox is running without -jssh (RuntimeError) is there any tutorial or hnt to get firewatir actually running on Mac OSX?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >