Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 16/285 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• How can I find which drivers are the correct ones for my machine?

  - by tombull89

  I'm currently installing Windows 7 onto a new laptop before imaging it to deploy. I need to install the Wireless and Graphics drivers, but the HP site is offering me both ATI and Intel graphics drivers (at 102MB and 470(!)MB) a pop, as well as Intel, Broadcomm, RealTek and Atheros wireless drivers. Is there a bit of software that will tell me what devices are in the machine so I don't have to go through, trial-and-error and find which is the right driver for the hardware?

  Read the article

• How to enabled Printer Sharing on Web Server 2008?

  - by FarrEver

  I am installing Web Server 2008 for my home network. I have 2 USB printers that I am connecting to this machine and want to share these printers so that my other machines can print to these 2 USB printers. (I previously had Win Server 2003 on this machine and was able to share both printers fine.) File and Printer sharing Inbound Role for my Private network is enabled, when I go into Network and Sharing Center and try to turn ON Printer Sharing, it never sticks. It always stays on OFF. I go to my installed printers and try to Share them and get the following error message: Printer Settings could not be saved. Remote connections to the Print Spooler are blocked by a policy set on your machine. I have not been able to find a policy on my machine that is preventing this. I have searched a lot over the past few days and most of the results say what I have done should work and there are also a number of search results that say Printer Sharing on Web Server 2008 is not allowed and you have to hack it. Has anyone installed Web Server 2008 and shared printers before? If so, what are the detailed steps you took to get this to work?

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

• Driver denied access to PCI card

  - by Corin

  We wrote a Windows device driver to access our custom PCI card. The driver uses CreateFile to get a handle to the card. We recently had trouble at one installation were the card appeared to stop working. We tried replacing the card (the replacement appeared not work either). The computer vendor replaced the motherboard and both cards still failed to work. We put the cards in a different computer and both worked fine. We now have the computer at our office for examination. The Windows Device Manager lists our card in Other Devices as usual and says it's working fine. However, our driver initialization fails when it attempts to connect to the card. We created a test version of our driver with some extra debugging and determined that CreateFile is failing. It returns INVALID_HANDLE_VALUE as it is supposed to on failure. GetLastError indicates the error is Access is Denied. Since we're logged into the system as a local administrator, what can deny access to the device?

  Read the article

• Virtual audio driver (microphone)

  - by Dalamber

  Hello guys, I want to develop a virtual microphone driver. Please, do not say anything about DirectShow - that's not "the way". I need a solution that will work with any software including Skype and MSN. And DirectShow doesn't fit these requirements. I found AVStream Filter-Centric Simulated Capture Driver (avssamp.sys) in Windows 7 WDK. What I need is an audio part of it. By default it reads avssamp.wav and plays it. But this driver is registered as WDM streaming capture device. And I want it in Audio Capture Device. There are some posts in the web but they are all the same: http://www.tech-archive.net/Archive/Development/microsoft.public.development.device.drivers/2005-05/msg00124.html http://www.winvistatips.com/problem-installing-avssamp-audio-capture-sources-category-t184898.html I think registering this filter-driver as audio capture device will make Skype recognize it as a microphone and thefore I will be able to push any PCM file as if it goes from mic. If someone already faced this problem before, please help. Thanks in advance.

  Read the article

• Unity desktop "smears" (doesn't refresh) and shows no wallpaper

  - by Cedric Reichenbach

  Since a couple of days now, my unity desktop background smears everything, just like what old Windows versions were famous for: Of course, I tried rebooting a couple of times. Also, I switched graphics driver and I tried to change wallpaper and theme, but none of them solved the problem. What could be causing that problem, and where can I search on for its source? Infomation update I'm using Ubuntu 13.04 (not updated to 13.10 yet). The following command were all run from cinnamon (on the same Ubuntu installation). sudo lsb_release -a: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring sudo uname -a: Linux cedric-MacBookPro 3.8.0-32-generic #47-Ubuntu SMP Tue Oct 1 22:35:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux sudo dpkg -l | grep xserver-xorg-video: ii xserver-xorg-video-all 1:7.7+1ubuntu4 amd64 X.Org X server -- output driver metapackage ii xserver-xorg-video-ati 1:7.1.0-0ubuntu2 amd64 X.Org X server -- AMD/ATI display driver wrapper ii xserver-xorg-video-cirrus 1:1.5.2-0ubuntu1 amd64 X.Org X server -- Cirrus display driver ii xserver-xorg-video-fbdev 1:0.4.3-0ubuntu1 amd64 X.Org X server -- fbdev display driver ii xserver-xorg-video-intel 2:2.21.6-0ubuntu4.3 amd64 X.Org X server -- Intel i8xx, i9xx display driver ii xserver-xorg-video-mach64 6.9.3-0ubuntu1 amd64 X.Org X server -- ATI Mach64 display driver ii xserver-xorg-video-mga 1:1.6.2-0ubuntu1 amd64 X.Org X server -- MGA display driver ii xserver-xorg-video-modesetting 0.7.0-0ubuntu2 amd64 X.Org X server -- Generic modesetting driver ii xserver-xorg-video-neomagic 1:1.2.7-0ubuntu1 amd64 X.Org X server -- Neomagic display driver ii xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 amd64 X.Org X server -- Nouveau display driver ii xserver-xorg-video-openchrome 1:0.3.1-0ubuntu1.13.04.1 amd64 X.Org X server -- VIA display driver ii xserver-xorg-video-qxl 0.1.0-0ubuntu3 amd64 X.Org X server -- QXL display driver ii xserver-xorg-video-r128 6.9.1-0ubuntu1 amd64 X.Org X server -- ATI r128 display driver ii xserver-xorg-video-radeon 1:7.1.0-0ubuntu2 amd64 X.Org X server -- AMD/ATI Radeon display driver ii xserver-xorg-video-s3 1:0.6.5-0ubuntu3 amd64 X.Org X server -- legacy S3 display driver ii xserver-xorg-video-savage 1:2.3.6-0ubuntu1 amd64 X.Org X server -- Savage display driver ii xserver-xorg-video-siliconmotion 1:1.7.7-0ubuntu1 amd64 X.Org X server -- SiliconMotion display driver ii xserver-xorg-video-sis 1:0.10.7-0ubuntu1 amd64 X.Org X server -- SiS display driver ii xserver-xorg-video-sisusb 1:0.9.6-0ubuntu1 amd64 X.Org X server -- SiS USB display driver ii xserver-xorg-video-tdfx 1:1.4.5-0ubuntu1 amd64 X.Org X server -- tdfx display driver ii xserver-xorg-video-trident 1:1.3.6-0ubuntu2 amd64 X.Org X server -- Trident display driver ii xserver-xorg-video-vesa 1:2.3.2-0ubuntu1 amd64 X.Org X server -- VESA display driver ii xserver-xorg-video-vmware 1:12.0.2+git.e5ac80d8-0ubuntu1 amd64 X.Org X server -- VMware display driver sudo lspci | grep VGA: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 330M] (rev a2)

  Read the article

• Printing fails after first print with Centos 6 and HP LaserJet P3015dn printer

  - by Gavin Simpson

  Centos 6 recognises and configures a HP LaserJet P3015dn printer connected via USB. This machine is being configured as a small group file/print server. I can print a test page, which is processed/printed correctly. The next time printing is attempted (say printing a second test page), the page is not printed and the printer is set to disabled. The status of the printer is stated as: Stopped - /usr/lib/cups/backend/hp failed in the printer configuration dialogue. /var/log/cups/error_log contains this information (first two lines were there prior to the failed print job) E [24/Jun/2004:09:12:57 +0100] Returning HTTP Forbidden for Resume-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost E [24/Jun/2004:09:20:59 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost D [24/Jun/2004:09:37:28 +0100] [Job 28] The following messages were recorded from 09:36:43 AM to 09:37:28 AM D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding start banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding end banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] File of type application/vnd.cups-banner queued by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] hold_until=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Queued on "HP-LaserJet-P3010-Series" by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] job-sheets=none,none D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[0]="HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[1]="28" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[2]="gavin" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[3]="Test Page" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[4]="1" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[5]="job-uuid=urn:uuid:b3370a97-4ab6-3451-40a2-6239b13fa3e1 job-originating-host-name=localhost" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[6]="/var/spool/cups/d00028-001" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[2]="CUPS_DOCROOT=/usr/share/cups/www" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[8]="HOME=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[10]="[email protected]" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[11]="SOFTWARE=CUPS/1.4.2" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[12]="TMPDIR=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[13]="USER=root" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[15]="CUPS_ENCRYPTION=IfRequested" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[16]="IPP_PORT=631" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[17]="CHARSET=utf-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[18]="LANG=en_US.UTF-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-P3010-Series.ppd" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[20]="RIP_MAX_CACHE=8m" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[21]="CONTENT_TYPE=application/vnd.cups-banner" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_P3010_Series?serial=VNBV993GM4" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[23]="PRINTER_INFO=Hewlett-Packard HP LaserJet P3010 Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[24]="PRINTER_LOCATION=electra.geog.ucl.ac.uk" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[25]="PRINTER=HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[26]="CUPS_FILETYPE=document" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript" D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/bannertops (PID 2858) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/pstops (PID 2859) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started backend /usr/lib/cups/backend/hp (PID 2860) D [24/Jun/2004:09:37:28 +0100] [Job 28] load_banner(filename="/var/spool/cups/d00028-001") D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_comments - %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%BoundingBox: 12 12 600 780 D [24/Jun/2004:09:37:28 +0100] [Job 28] %cupsRotation: 0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Creator: bannertops/CUPS v1.4.2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%CreationDate: Thu 24 Jun 2004 09:36:43 AM BST D [24/Jun/2004:09:37:28 +0100] [Job 28] %%LanguageLevel: 2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentData: Clean7Bit D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Title: (Test Page) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%For: (gavin) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Pages: 1 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentSuppliedResources: font Monospace D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Bold D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-BoldOblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Oblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%EndComments D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_prolog - %%BeginProlog D [24/Jun/2004:09:37:28 +0100] [Job 28] STATE: +connecting-to-device D [24/Jun/2004:09:37:28 +0100] [Job 28] prnt/backend/hp.c 762: ERROR: cannot open channel PRINT D [24/Jun/2004:09:37:28 +0100] [Job 28] Backend returned status 1 (failed) D [24/Jun/2004:09:37:28 +0100] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details. D [24/Jun/2004:09:37:28 +0100] [Job 28] End of messages D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state=5(stopped) D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed" D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-reasons=paused /var/log/messages contains the following reports associated with the recognition of the printer and the failed print job: Jun 24 09:35:07 electra kernel: usb 1-8: new high speed USB device using ehci_hcd and address 2 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device found, idVendor=03f0, idProduct=8d17 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 24 09:35:07 electra kernel: usb 1-8: Product: HP LaserJet P3010 Series Jun 24 09:35:07 electra kernel: usb 1-8: Manufacturer: Hewlett-Packard Jun 24 09:35:07 electra kernel: usb 1-8: SerialNumber: VNBV993GM4 Jun 24 09:35:07 electra kernel: usb 1-8: configuration #1 chosen from 1 choice Jun 24 09:35:07 electra kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17 Jun 24 09:35:07 electra kernel: usbcore: registered new interface driver usblp Jun 24 09:35:07 electra udev-configure-printer: invalid or missing IEEE 1284 Device ID Jun 24 09:35:08 electra hp[1942]: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:09 electra python: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:51 electra kernel: usblp0: removed Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 254: unable to read Dot4ReverseReply data: Resource temporarily unavailable exp=2 act=0 Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20#012, revision=0 Jun 24 09:37:28 electra hp[2860]: prnt/backend/hp.c 762: ERROR: cannot open channel PRINT I am now at a loss as to how to proceed to get this printer working on my Centos machine. How can I configure the machine to print more than a single print job without needing to be unplugged/plugged in repeatedly?

  Read the article

• Is the Windows 7 default graphic driver faster than the newest NVIDIA Forceware?

  - by netvope

  Here is my Windows 7 Experience Index using the stock graphics driver: And after installing the newest driver Forceware 197.45, it becomes: The only change is that the "Gaming graphics" subscore drops from 6.4 to 5.2. Is the stock graphic driver more optimized for Windows 7? Or is Forceware 197.45 buggy? Should I revert back to the stock driver? My configuration: Athlon 64 X2 5000+ Asus M2A-VM (AMD 690G, SB600) 6 GB DDR2-800 RAM (only 3.25 GB usable under Windows) GeForce 8600 GT (256 MB) Windows 7 Ultimate 32-bit

  Read the article

• Printer Redirection from 2003 Terminal Server to 2008 Terminal Server

  - by xmaveric

  Our environment is a terminal server cluster (Win2003 servers) that everyone connects to do do their work. I have set up a new Win2008 R2 machine with the intention of using it to publish our main application to the TS farm. The idea was to keep this server dedicated to one application to avoid driver/dll conflicts with other software. I created a RemoteApp on the new server and made an .rdp file and placed it on the desktop of our TS farm servers. The problem I am running into is that when I connect to the RemoteApp, it doesn't show the printers that are installed on the TS server I am connecting from. We have over 20 printers installed on our TS servers, each with different drivers and permissions. I really do not want to reinstall all of these on the RemoteApp server so I was hoping Printer Redirection would handle this. It would appear that because the RDP client for Server 2003 x64 is 6.0, that version doesn't support the Easy Print feature (requires 6.1). I can't find any newer version on the MS site to download for Win2003 x64. How can I get the printers on the TS farm machine to redirect so they are viewed by the RemoteApp machine?

  Read the article

• Device Driver IRQL and Thread/Context Switches

  - by Christian Hoglund

  Hi, I'm new to Windows device driver programming. I know that certain operations can only be performed at IRQL PASSIVE_LEVEL. For example, Microsoft have this sample code of how to write to a file from a kernel driver: if (KeGetCurrentIrql() != PASSIVE_LEVEL) return STATUS_INVALID_DEVICE_STATE; Status = ZwCreateFile(...); My question is this: What is preventing the IRQL from being raised after the KeGetCurrentIrql() check above? Say a context or thread swithch occurs, couldn't the IRQL suddenly be DISPATCH_LEVEL when it gets back to my driver which would then result in a system crash? If this is NOT possible then why not just check the IRQL in the DriverEntry function and be done with it once for all?

  Read the article

• Cheap windows driver signing for 64 bit Windows 7

  - by kayahr

  I need to install the libusb-win32 driver on Windows 7 64 bit machines. This driver is open source so it is not digitally signed so I want to do this my self but I wonder if this can be done WITHOUT paying lot of money. Is it possible to use a certificate which is NOT signed by Verisign or GlobalSign? Maybe self-signed or by using StartSSL instead? And if yes, how do I do it? According to this howto I have to use a "cross-certificate" (And there are only six available on the Microsoft list and most of them are for CAs which are no longer active) I don't care if the user is confronted with a warning message. I can even accept if the user has to install a special CA certificate first. I only require that the driver runs without manually disabling the signature check on each windows startup.

  Read the article

• Install device driver silently on Windows XP

  - by mt_serg

  Is there a way to programmatically install device driver silently without cat file and without connecting the device on Windows Xp? I'm using DriverPackageInstall function from Windows Driver Kit. And I can install driver only if device is attached. In other case I get an error: ERROR_NO_SUCH_DEVINST. But that method works fine with Windows Vista. Another problem is warning dialog that asks user to continue or stop installation because cat file is missing . It shows on both OSes. Any ideas?

  Read the article

• creating a custom odbc driver for application

  - by neddy

  Ok, i have a simple database engine (its a proprietary product written in vb6) for one of my applications... i'd like to create an ODBC driver for it so i can use some of my other applications (which require a database) with my database engine rather than microsoft sql (which they are currently using).... Does anyone have any heads up on how to develop an ODBC driver (preferably in vb6) ... i'v spent the last few hours googling it and havnt had much luck... about the best thing i have found so far is: http://www.datadirect.com/products/openaccess/index.ssp but i dont exactly want to go buying an SDK to write an ODBC driver... Cheers in advance,

  Read the article

• Windows 7 add printer, cancelled, but port still in use. How to remove?

  - by Jake

  I tried to add a network printer at www.xxx.yyy.zzz, but halfway it when it asked for a driver, I cancelled it because I do not have the driver at hand. Later when I try to add again, it tells me the port (www.xxx.yyy.zzz), which is automatically specified as the same as the IP for the printer, is already in use and then suggest www.xxx.yyy.zzz_1 Now, I cannot find the www.xxx.yyy.zzz printer anywhere such that I can remove it and use back the same port. How should I do it? Any ideas? Thanks.

  Read the article

• Does laser printer use toner when switched on/off?

  - by Alan Harris-Reid

  I have recently purchased a HP LaserJet M175nw laser printer which goes into sleep-mode after 10 minutes of non-use. I know sleep-mode uses a very small amount of power, but the flashing light on the control panel is driving me nuts! I know I can turn-off the printer via. the on/off button, but when it is turned-on manually, there is some whirring sound which I guess might be the machine warming-up. My question is... Is any toner used during this warm-up (or cleaning) cycle? Am I better-off keeping the printer in sleep mode, or is it ok to turn off manually? TIA Alan

  Read the article

• Do any of the HP printers have implement printer sharing?

  - by BCS

  I've seen several (home grade) HP prints that have network port and allow connecting to them via that. However I haven't seen any way to use it without installing the printer specific drives. This seems a bit silly because I've seen printer sharing system (SMB I think) that didn't seem to need any printer specific software. My question is: Is there a way to use one of these with my printers? (I'm omitting the exact model in the hopes that answers for several models (or a resource that answers it for several models) will be given.)

  Read the article

• Removed Xserver driver. ubuntu doesnt start. what should i Do?

  - by user71576

  im new on ubuntu , i intalled it ( dual booted with windows 7) i was customizing it, but when i tried to run compiz it said that missing glx or something like that in the screen, i realized that the driver that i was not using wasnt the gefroce on so i went to nvidia downloaded the correct version for my graphic ( geforce gtm 525m) when y run the .run file it told me that i was using xserver and that i cant install this driver with the xserver installed. i search for information of how to remove or disable xserver i found one. in this web site --http://www.ubuntugeek.com/ubuntu-tiphow-to-removeinstall-and-reconfigure-xorg-without-reinstalling-ubuntu.html when i run the command , after that i tried to instal the geforce on, doesnt work so i remember windows that you must reboot after a driver unintallation or intallation so i reboot, them ubuntu doesnto load, it show the ubuntu whit the five dots like or 1-2 sec and them i get a black screen ( not the red-black of ubutntu ) so why i should do. i dont want to re install i dont have a cd and my usb is a little damaged so please if you could help me

  Read the article

• debugging a resource leak in a printer driver

  - by MK

  I'm trying to debug a memory leak in a printer driver. I'm pretty sure it's a resource leak, not just a plain memory leak because analyzing heap with !heap -s in windbg doesn't show any increase. How do I monitor other kinds of objects with windbg? Number of GDI objects and open handles is not growing either, so what could it be?

  Read the article

• What port does OpenLink ODBC Driver use?

  - by user36737

  I use Avaya Reporting Services and OpenLink ODBC Drivers for db connection. I know that it uses port 5000 for handshaking but after that I believe it uses an random port for communication. I want to deploy my application and it will communicate with the client's system in their datacenter. They are asking what ports should they open on their firewalls. I can't obviously give them a range above 50,000 that I know OpenLink ODBC Drivers use. Can someone tell me what port should I tell my client to open?

  Read the article

• Very slow printing from print server

  - by evolvd

  Print server is a VM on Xen The VM is Windows 2003 32bit. During the issue the VM is not being taxed in anyway, cpu, memory, hd read/write, and network speed is all good. The problem that I see is the transfer of the print file from the print server to the printer. The 80Mb file is transferred from the client to the print server in about 2 minutes but then it takes about 2 hours for that file to be sent to the printer. I can't figure out why this would just start to happen. The printer is rebooted every evening and is just used for one large print job in the morning. The server has been rebooted with no effect I changed the spool option to send the entire spool to the server before printing starts and it had no effect. This printer problem did happen to come about after some changes to the Xen environment. The Xen servers changed from using HBA NIC cards to software iscsi and a new switch was put in. I don't think this is related to the problem since all the speeds on the VMs are better now. The changed happened on Saturday and the first print to this printer happened on Monday morning. I'm just putting that out there but like I said I don't think it is related but I don't want to rule it out. At this point I don't have many other options besides the physical layer. I can switch out network cable that goes to the printer and I might be able to print the same job to another printer. I wont be able to test those things out till this afternoon though. Any other ideas or test I could do to try to find the reason for the slow speed? I forgot to say that this is only happening when printing to this one printer. ===Update=== I found out that there are a few printers that currently have this issue, not just the one. There are over 30 printers on the server though so I know it's not happening to all of them. I printed a large pdf doc from the server and it was able to print at the normal speed. If the machine sends the large print request it gets to the server fine but then slow to get from the server to the printer. If sent directly from the printer it gets to the printer at the normal speed. The question now is why is there a speed difference when it comes from the machine and why would it start now?

  Read the article

• Server 2008 R2 - Unable to install any printer drivers

  - by toffitomek

  My problem is exactly this same as described here: Server 2008 R2 - Unable to install any printer drivers Options - google groups I have few Windows 2008 R2 (no SP1) servers in remote offices, mostly in Domain Controller, and many of them have problems installing ANY printer drivers. following errors show up in Event Log when adding printer driver under Print and Document Services/Print Management/Print Services/ /Drivers OR trying any other way to install drivers: EventID 215: Installing printer driver - failed, error code 0x57, HRESULT 0x80070057. See the event user data for context information. EventID 215: Installing printer driver Canon iR C2380/2550 PCL6 failed, error code 0x0, HRESULT 0x80070057. See the event user data for context information. EventID 215: Installing printer driver Canon iR C2380/2550 PCL6 failed, error code 0x490, HRESULT 0x80070057. See the event user data for context information. in this particular server case this is problem with Canon iRC 2380i printer with Canon Generic PCL6 Driver, but it seems to apply to any driver and any printer (tried different drivers, different versions, PCL, postscript, etc) I'm using 64 bit drivers that should be working on this platform. Any help will be appreciated.

  Read the article

• Diagnosing the problem when Canon printer fails to print under Ubuntu

  - by MMA

  I understand that the issue of Canon printer under Linux has a number of posts. Actually one of these, was started by me. After inputs from others I have successfully printed using Canon LBP6000 from my Ubuntu machine for around a year. If it failed to print, restarting the daemon using this homemade script coaxed the printer to print. #!/bin/bash pkill -9 -x ccpd pkill -9 -x captmoncnabc /etc/init.d/ccpd start /etc/init.d/ccpd status Recently, I am not successful any more, or successful on a limited and sporadic basis. Sometimes it prints when turned on after logging in, sometimes when the driver is reinstalled. I keep on trying the random steps (call abracadabras) until I get success. Again, not always success comes. I frustrate on for hours only to get single page printed. I loose precious time on the issue of printing. I have read and read all the documents available over the Internet. However, if you please notice, none of the guides, articles, tutorials (these are too many to list here) seem to be dealing with diagnosing the problem when it fails to print. They tell you where to find the drivers, how to install them, or which script to run to make the installation process automatic. Yes, some of the articles or comments suggest a step to try, without any systematic order. But these fail to suggest a step based on symptoms, mostly. This morning, my Canon LBP6000 failed to print. After sometime, there was a message for system error, details of which was found to be something like this. When I search for this error (c3pldrv crashed with SIGSEGV in write ()), I find a number of articles including this one. None of these are actually helpful. Mostly, these are 'me too', 'tell me if you find anything'. Running captstatusui -P LBP6000 produced this, Yes, the printer is connected and actually turned on. I believe that there a number of frustrated Canon printer users out there like me. But there is not a step by step definitive guide to systematically diagnose a non-printing printer. Do you think that you can provide your diagnosing inputs so that a systematic document can be built? May be we will want the Ubuntu users to stay away from Canon printers. But as I believe, as a Linux user for more than fifteen years, such a scenario is not acceptable any more. May be this was acceptable in the infancy days of Linux, but not today. I am using Ubuntu 12.04, by the way, I prefer LTS versions.

  Read the article

• How can I invoke the dialog to set printer options manually?

  - by FromTheMountain

  I'm using WPF and need to let users set some print related options like printer and printer properties (e.g. papertray, landscape/portrait, duplex, etc). I'm aware of the PrintDialog class to get a PrintQueue and PrintTicket object. However I need to create I custom solution and can not show the PrintDialog. I manage to get the available PrintQueue objects and let users select a printer. I'm struggling with the printer properties. My question is: how can I show the dialog in which a user can set the printer properties for the selected PrintQueue (the dialog that is shown when a user clicks on the Properties button in the WPF PrintDialog).

  Read the article

• Usb Driver on 64bit Windows

  - by SurDin

  I have a pretty generic 64bit driver based on bulkusb.sys in WDK. It's been working for years with an embedded program, but now it is needed to work on Vista 64. From all the documentation I've tried to look through there doesn't seem to be anything affecting it, except compiling it for the 64bit environment, and yet when I compile it with the AMD64 build environment, I get "driver not intended for this platform" error message when it's trying to open the sys. What could be the solution for this?

  Read the article

• Error with varchar(max) column when using net.sourceforge.jtds.jdbc.Driver

  - by Rihan Meij

  Hi I have a MS SQL database running (MS SQL 2005) and am connecting to it via the net.sourceforge.jtds.jdbc.Driver. The query works fine for all the columns except one that is a varchar(max). Any ideas how to get around this issues? I am using the jdbc driver to run a data index into a SOLR implementation. (I do not control the database, so the first prize solution would be where I can tweak the SQL command to get the desired results) Thanks

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >