Search Results

Search found 500 results on 20 pages for 'resolutions'.

Page 16/20 | < Previous Page | 12 13 14 15 16 17 18 19 20  | Next Page >

• 12.04 boots fine, with graphical splash screen, but then Monitor "out of range"

  - by Jim Bednar

  I see dozens of posts from people whose monitors are saying "out of range" under Ubuntu; seems like there are some serious problems in Ubuntu with autodetection of monitor capabilities. :-( But none of the many, many suggestions I found have solved my problem, and right now I can't use anything graphical on this machine! History: I installed Ubuntu 12.04 on my HP Proliant Microserver N40L, which worked reasonably at the default resolution across several reboots. At some point I noticed that the proprietary video driver was not in use, and tried to install one to get better window-drawing speeds, but it failed with some sort of error, and I gave up on that. A few weeks later when I next rebooted, it showed the usual BIOS screen and various boot loading screens (including GRUB), and then the usual purple Ubuntu splash screen with the dots showing that things were loading, but when it finished booting the monitor went black and eventually showed "Out of range" (with no other information). Given that there were several weeks between reboots (it's a server, after all), I've no idea if it was some system update, trying to install the proprietary drivers, or something else that caused the problem. Anyway, the system has booted fine, as I can do Ctrl-Alt-F1 to get a text prompt and can log in there. But Ctrl-Alt-F7 goes back to the out of range error. Some posters said to try Ctrl-Alt-- (minus) to cycle through resolutions until one works, but that didn't have any visible effect. Many, many others said it was a grub problem, which seems unlikely given that grub's screen looks fine, but I tried editing /etc/default/grub to set a particular resolution (trying many of them) and running update-grub, with no apparent effect. Rebooting into failsafe mode works the same as regular mode. Replacing xorg.conf with xorg.conf.failsafe works the same too. I'm at my wits' end! Isn't there anything I can do to convince Ubuntu to choose a mode that the monitor supports? E.g. the one that it is using for the splash screen? I don't need great resolution on this machine, just anything that works!!!!! Help!!!!!! Please!!!!

  Read the article

• Is there an API for determining congressional districts?

  - by ardavis

  I'm looking to determine the congressional district based on an address my user is providing. This will avoid having the user to look it up themselves. Does an API of this sort exist? Note Through my attempts to find one, I've only come across these: http://www.govtrack.us/developers/api (not sure how to submit an an address or zip code however) The following resources are available in the API ...Bills and resolutions in the U.S. Congress since 1973 (the 93rd Congress). ...A (bill, person) pair indicating cosponsorship, with join and withdrawn dates. ...Members of Congress and U.S. Presidents since the founding of the nation. ...Terms held in office by Members of Congress and U.S. Presidents. Each term corresponds with an election, meaning each term in the House covers two years (one 'Congress'), as President four years, and in the Senate six years (three 'Congresses'). ...Roll call votes in the U.S. Congress since 1789. How people voted is accessed through the Vote_voter API. ...How people voted on roll call votes in the U.S. Congress since 1789. See the Vote API. Filter on the vote field to get the results of a particular vote... http://www.opencongress.org/api (seems to be a way to find congress information, but not districts) This API provides programmers with structured access to all the data on OpenCongress, everything from official bill info to news and blog coverage to user-generated votes on bills and much more... This API defaults to returning XML. All queries can also return JSON... https://groups.google.com/forum/?fromgroups=#!topic/opendems-discuss/CeKyi_aANaE (similar question, no resolution) I've been looking over Open Dems, and seeing what's exposed at this point and what isn't. I work with Democrats Abroad, and am interested in using stuff from the lab for their sites. I quickly looked over the Precinct API, which does both more and less than what I'd need. An ideal resource would be any way of translating addresses into CD at the very least (getting state district data would be good as well), since that would make it easier for DA's membership to make a difference in races like last month's NY26 race... Update I'm looking at the source for the govtrack.us website and the 'doGeoCode' function may be useful. view-source:http://www.govtrack.us/congress/members If no one has any suggestions, I will try to go off of what they are doing.

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• Ubuntu Linux won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Frame rate on one of two machines running same code seems to be capped at 60 for no reason

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated.

  Read the article

• Are You Meeting Social Customer Service Expectations?

  - by Mike Stiles

  Whether it’s B2B or B2C, one sure path to repeat business is making sure your buyer has a memorably pleasant and successful customer service experience with you. If they get that kind of treatment consistently, that’s called a relationship. And those aren’t broken easily. Social customer service, driven by integrated SRM (social relationship management) technology, is the venue that can effectively connect customers not only to the brand, but to other customers. Positive experiences, once administered, don’t just rest with the recipient. They’re published in the form of public raves and peer-to-peer recommendation, a force far more actionable than push advertising. What’s more, your customers have come to expect access to you and satisfaction from you using social. An NM Incite study shows 83% of Twitter users and 71% of Facebook users expect to get an answer from brands the same day they post to them on their social assets. To make sure you’re responding, you’ve got to have a tech platform that’s set up to moderate and alert so you’ll know ASAP a customer needs help. The more integrated your social enterprise is, the faster you can not only respond, but respond with the answer they’re looking for, because your system is connected to the internal resources that can surface the answer or put wheels in motion to rectify the situation in the shortest amount of time possible. But if you go to the necessary lengths to make sure your customers feel valued and important, will they really reward you? The study says 71% of consumers who got quick and effective responses from companies they contacted via social were more likely to recommend the brand to their friends and followers. So yes, sweeping people off their feet pays big dividends in terms of word-of-mouth marketing. But you should be keenly aware of the reverse side of that coin. Give people a negative experience, either in real world or virtual customer service, and that message is highly likely to get amplified through social channels faster and louder. Only 36% of the NM Incite study’s respondents reported that their problems were solved quickly and effectively. 36%? That’s hardly an impressive number. It gets worse. 10% never got so much as a response - at all. Going back to the relationship analogy, companies that are this deep in the ditch where customer service is concerned are making their girl or boyfriends really easy for a competitor to steal. Given the technology tools and data available right now for having an intimate knowledge of the customer, what products they’ve purchased, likely problems with those products, effective resolutions to those problems, and follow-up communication to gauge satisfaction, there are fewer excuses than ever for making the lifeblood of your business feel like you couldn’t care less. @mikestiles

  Read the article

• Understanding When Social Interactions Should Be Resolved in Another Channel

  - by Christina McKeon

  Guest Blogger: Aphrodite Brinsmead, Senior Analyst at Ovum Agents need to respond to customers’ social comments and questions quickly and in the right tone. But more importantly, they need to offer resolutions. Customers care most about how long it takes to find information rather than which channel they are using. They choose to use social media because they are comfortable with the channel and it offers a convenient way to communicate. Ideally agents will resolve questions within social media, but they need guidance as to how and when to escalate interactions to a more private channel. First, businesses should assess the way in which customers are using social media to communicate with them and categorize posts into groups: complaints, feedback, technical queries or more general support questions. They should then consider the types of interactions that can easily be handled within social media and those that need to be followed up in another channel. This will be very dependent on the industry. Examples of queries that can be resolved in social media include Shipping pricing and timeframes Outage updates and resolution plans Flight status information Product stock check Technical support videos or forum posts Availability of facilities Both customers and agents need to be educated about the types of questions they can expect to resolve within social media. As the channel matures as a customer service tool, it needs to have value other than just as a forum for complaints. Social customer service agents need the power to start a web chat or phone call Any questions where customers need to divulge personal details in order to get a resolution will need to be addressed in a private channel: a private social message, web chat, email or phone call. Customers should never disclose their date of birth, social security, credit card number, or healthcare records in a public forum. Flight issues, changes to a booking, billing queries or account updates will all need to be completed via a private interaction. Agents responding to questions on social media need the ability to start a web chat or phone call with the customer. The customer doesn’t want to have to repeat their question and the agent should be empowered to connect customer records and access account or billing information. These agents will need to be trained across different channels and should be able to view all customer communications in one application. They also need to follow up questions that began on a public forum in the initial channel to make it clear that the issue was addressed. In order to make this possible, social media needs to be integrated as part of a broader customer service strategy. Irrespective of how many channels are used to complete an interaction, businesses should prioritize customer satisfaction and issue resolution. They need a clear strategy and trained agents that can handle and respond to social interactions. Follow me on Twitter @diteb. 

  Read the article

• Summary of our Recent Pull Request Enhancements on CodePlex

  Over the past several weeks, we’ve been incrementally rolling out a bunch of enhancements around our pull request workflow for Git and Mercurial projects. Our goal is to make contributing to open source projects a simple and rewarding experience, and we’ll continue to invest in this area. Here’s a summary of the changes so far, in case you’ve missed them. As always, if you have any feedback, please let us know, whether on our ideas page or via Twitter. Support for branches You can now pick the source and destination branches for your pull request, whether you’re sending one from your fork, or using it within a project to collaborate with your other trusted contributors. A redesigned creation experience Our old pull request creation form was rather lacking. It asked for a title and comment in a small modal dialog, but that was about it. We knew we could do better, so we rethought the experience. Now, when you create a pull request, you’re taken to a new page that let’s you select the source and destination, and gives you information on the diffs and commits that you’re sending, so you can confirm that you’re sending the right set of changes. Inline code snippets in discussion If users comment on code in your pull request, we now display a preview of the snippet of relevant code inline with their comment on the discussion. Subsequent replies on that line are combined in a single thread to preserve your context. No more clicking and hunting to find where the comments are. And you can add another inline comment right from the discussion area. Comment notifications You can now elect receive an e-mail notification if a user comments on your pull request. If it’s on a line of code, we’ll display the relevant code snippet in the e-mail. Redesigned diff viewer Our old diff viewer hadn’t been touched in a while, and was in need of an update. We started with a visual facelift to use standard red/green colors for additions/deletions and remove the noisy “dots” that represented spaces and that littered the diff viewer. Based on feedback that the viewable region for diffs was too small, especially for smaller screen resolutions, we revamped the way the viewport for the code is sized, and now expand it to fill the majority of the browser height when scrolling down. The set of improvements we implemented here also apply anywhere diffs are viewed, not just for pull requests.

  Read the article

• Legacy non-dpi-aware application resolution scaling?

  - by Miles Erickson

  Our environment prominently featuers an outdated but absolutely mission-critical Win32 application that is not dpi-aware. It is optimized for an 800x600 display. Most of our users now have 17"-20" displays with native resolutions ranging from 1280x1024 to 1680x1050. However, they still operate these displays at 800x600 because the text in this legacy application is otherwise too small. Of course, it also means that nothing quite fits on the screen in Office 2007. Most of our workstations still run Windows XP, but some are on Windows 7 and there are more to come. About one-third of our users run the app remotely via MS Terminal Services, and the remainder run it locally. Is anyone aware of any method that could be used to scale this specific application to about 170%, so that it would fill a 1280x1024 screen, without affecting other applications that work best at the display's native resolution? I know how to do this in Mac OS X, but I have never found a way to do it in Windows. Of course, this ideally would be something that we could push out via Group Policy. I suppose we even could create a custom MSI package to re-deploy the legacy application with some sort of display virtualization layer, if such a thing exists.

  Read the article

• Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

  - by ProfessionalAmateur

  Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

  Read the article

• Simple image editor to select area of image as wallpaper

  - by Kevin

  I've spent way to many hours looking for software to do the following simple task, so now I'll ask. I need software that will open an image and put a 'crop box' on it. You can set the 'crop box' to standard screen resolutions (1024x768) or define a custom one. You can move the 'crop box' around on the image to select the area you want. You can re-size the 'crop box' (selecting a corner and dragging w/mouse) and it maintains the correct aspect ratio. You can save the area in the 'crop box' to use as the Windows background. (The software doesn't need to set it as the background, I can do that myself in Windows XP.) The free software sites (CNET.com, etc.) have lots of image editing software that do things much more complicated than this simple task. I've spent too many hours downloading them to see if they will do this particular task. The ones I've tried would require manual trial and error to get the part of an image that I want saved as an image, with the correct aspect ratio so Windows doesn't screw with it (stretch, tile, crop) when I select it as the wallpaper.

  Read the article

• Installing rpm module of Python for yum

  - by vito

  I've installed Python and yum from source (configure, make, make install), not using RPMs because that's leading to several other issues. So when I executed: # yum update ... I get the following error: Traceback (most recent call last): File "/usr/bin/yum", line 22, in <module> import yummain File "/usr/share/yum/yummain.py", line 22, in <module> import clientStuff File "/usr/share/yum/clientStuff.py", line 18, in <module> import rpm ImportError: No module named rpm Now because I've installed yum and python from source, do I need to install Python's rpm module from source, too? Because installing the rpm for this module lead to the following error: # rpm -vih rpm-python-3.0.4-6x.i386.rpm warning: rpm-python-3.0.4-6x.i386.rpm: V3 DSA signature: NOKEY, key ID db42a60e error: Failed dependencies: python >= 1.5.2 is needed by rpm-python-3.0.4-6x.i386 libbz2.so.0 is needed by rpm-python-3.0.4-6x.i386 librpm.so.0 is needed by rpm-python-3.0.4-6x.i386 Suggested resolutions: /var/spool/up2datepython-2.3.4-14.7.el4.x86_64.rpm I tried searching for the source of this module, but I couldn't find it. Any help in installing this module is appreciated. Thanks for your time. Other info: # python -V Python 2.6.5

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• Using native resolution on external display results in stretched, out of bounds image

  - by Roni Yaniv

  I have an HP min 311 netbook with Windows XP, which I've connected to a Samsung SyncMaster 2043BW display via the supplied analog cable. The external display's native res is 1680x1050, which the netbook's ION GPU supports. I've configured the external display as the single display (no cloning or any such fancy stuff). However, once I set the native res, the image just stretches out. It looks squashed, and it goes outside the monitor's edges. In contrast, lower resolutions manage to stay within the monitor's display edges, though obviously they are skewed in some way (vertically or horizontally). BTW, the only res which seems to be displayed relatively clearly (it's the least blurry) is 1280x720. I tried looking all over the web for an explanation/advice but could not find any. I already played with the settings on the external display itself several times. So either it's not that, or I missed something. Has someone run into this issue? I need help.

  Read the article

• Least CPU intensive way of streaming your screen on windows?

  - by sinni800

  Hello, sometimes I like capturing my screen for others to see. Only thing: I am playing games while I do it. I have tried a few streaming solutions where Windows Media Encoder coupled with my own Windows server appealed to me most, because I can change resolutions, etc. I also tried ustream coupled with the Flash applet and the Adobe Flash Encoder recording a Camtasia source. Camtasia has the disadvantage though that it shows the green-and-black-alternating borders and can not be targeted fullscreen. I like how xfire does it. But it doesn't work with every game, many are simply not supported. A few thoughts about this: Is there a program which captures like Fraps or XFire (based on Direct3D and OpenGL outputs) and exposes the output to a DirectShow source filter? Which brings me to: Is there hardware accelerated capturing directly from the graphics card? Maybe including direct encoding with help from OpenCL? Modern graphic cards decode BluRay content directly for example. I should have a modern enough graphics processor for this to be possible (see below). If using Windows Media Encoder: Which are the least CPU intensive settings? Which codec? Is there a newer codec than Windows Media 9? Is it less CPU intensive? I only have 7, 8 and 9 inside the Encoder Could the performance be massively increased by having a Quad-Core CPU (see below)? Bandwidth is no problem up to 1000 to 1500 kbit/s (I have 2048). My Computer specs: Intel Core 2 Duo E8400 4 GB DDR2-800 Ram Ati Radeon HD5770 Using Windows 7 Professional

  Read the article

• Copying large files from USB devices to the internal hard drive fails on Mac OS

  - by John M. P. Knox

  I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

  Read the article

• Free/opensource application for charting stock prices?

  - by Homunculus Reticulli

  I am looking for a free or FOSS software application for SIMPLY charting stock prices. I am not interested in any of the other nonsense typically bundled with such packages (technical analysis, back testing, tracking etc, etc). All I want to do is the following: Import file from CSV and plot on the chart Ability to scroll the chart left/right (zoom feature would be nice to) Ability to draw straight line (between 2 points) on the plot Ability to plot the graph for different resolutions (for e.g weekly, monthly - or some other custom resolution that I want) print the displayed graph (I can always use screen capture if printing is too much to ask) Thats all I want to do. I am not interested in anything else. I would have thought I could have found something by now. I would have written my own tool (I still will do that at a later stage), but I am a bit short of time at the moment, so I just want something that will do all of the above. Can anyone recommend a package. Last but not the least, I am running on Linux (and would prefer to do so - BUT if I have to, I can run on ahem - you know, Windows)

  Read the article

• How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

  - by joe larson

  Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

  Read the article

• Why do my Xcode default font starts to look ugly after some time, until I restart?

  - by mystify

  I plugged in an external monitor. All resolutions match perfectly. MacBookPro LCD is closed. After restarting Xcode editor fonts look very bad. Only in Xcode. When I restart the mac and DON'T use an external monitor, fonts look all right again. When I attach the monitor and close the LCD of the MacBookPro, fonts look nice. Then I close Xcode and reopen it: Fonts suck. Only way to get fonts look good is to disconnect external monitor and reboot, then reconnect external monitor, close LCD, wait, hit any key and let the external monitor be the only one. Fonts look nice - until I restart Xcode. I think it happens any time Xcode is launched with external monitor attached and ugly fonts survive until reboot. Unplugging external monitor and restarting Xcode doesn't help. It seems like Xcode isn't antialiasing them properly after something happens. Is there a fix for this problem? EDIT: After trying a few more times, it seems it is possible to get fonts to look nice by disconnecting external monitor and reopening xcode. Here are some little snapshots: GOOD FONT: UGLY FONT: You can see how dirty the ugly font looks. It's very hard to read and hurts in the eyes. Believe me. It sucks. Sometimes the little "i" are almost invisible. I make use of the very eye-friendly Dusk style of Xcode (go to preferences and choose that, if you haven't already. A real pleasure for your eyes)

  Read the article

• Desktop bigger than screen

  - by alex

  I am using MSI U115 11" netbook (OS: Windows XP Home, graphics card: Intel Graphics Media Accelerator 500) and today after I switched it on, desktop was bigger than screen. To be exact: screen resolution was set to the lowest possible and I could move mouse outside of screen (but only below - left, right and up worked normally, mouse could not exceed screen boundaries). I changed resolution back to normal, but the problem with desktop being bigger than screen remained (as before, only lower part - cannot see task bar, etc. When I hit windows button on keyboard, only upper part of menu start is visible). What I already tried was changing all kind of graphics and screen settings - none of them helped. I also tried to restore the system to few days before, but it didn't help neither. What can I do to make the desktop look "normally"? EDIT: Some additional info regarding screen: Sorry it's in polish - but let me explain. There are two screens I can choose (Monitor domyslny means default screen), but the second one (the default one) is not available. After I choose it and click apply number 1. is used (and as you can see it has only two resolutions available. There are more in the second one - but without 1024x600 though). The two ticked and grayed out options here are Use this screen as the main one and Enlarge Windows desktop to match this monitor's size. Too bad I cannot change them. When I choose the second screen, the first box is unchecked and grayed out. The second box is available to be changed but it doesn't matter anyway as after applying changes it reverts to the first screen anyway. EDIT: Intel Graphics Media Control Panel screenshot.

  Read the article

• GNU Screen and Finch Not Playing Nicely

  - by Sean M

  I use finch for instant messaging, and for persistence, finch is one of the things that runs in my screen session. There are three main computers that I access my screen session from, and each works at a different screen resolution. Because of the different resolutions, when I switch computers, I use screen -rd to attach to my screen session. Using screen -x results in problems. When I attach to the session, though, finch experiences display problems. I have to wait up to several minutes for finch to become responsive - it doesn't redraw properly at all. Trying to switch between chats just writes ^n and ^p, or ^(1-9) for numbers. It fixes itself after some time. Using ctrl-l does not help. Switching back and forth between screen windows does not help. This is an annoying behavior that I don't experience with any other applications running in screen. Is this a bug in screen or finch, and if not, what can I change about my configuration to correct it ? (would appreciate it if "finch" could be used as a tag for this instead of or in addition to "pidgin")

  Read the article

• VGA to S-Video/Video converter showing mashed up picture.

  - by Matthijs Wessels

  Earlier I asked this question: *http://superuser.com/questions/132374/does-the-lenovo-t60p-vga-port-support-an-s-video-signal As a result I acquired the following item: http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=250588098582&ssPageName=ADME:B:EOIBSA:NL:1123 Yea I'm a cheapass... Anyway, it just arrived and now I am trying to get it to work... The manual is not very informative other than telling me, this is the vga in, this is the vga out, this is the s/video out etc. Plus it tells me the system should support the following resolutions@refresh rate: 640x480@60/72/75Hz 800x600@60/75Hz 1024x768@60Hz I can connect it to my laptop and then I connect the S/Video and the Video to my tv which only gives me a blurred image (like when you set your monitor to a resolution it doesn't support). The VGA out however works fine to my tft monitor. The are two switches on the converter. I think one switches between s/video and video and the other between PAL and NTSC. But alas, no combination seems to give a better picture (it does give a different picture). Can anyone help me to solve this problem? I have downloaded this program called powerstrip, but I have no idea how to use it and if it can even solve my problem... Thanks in advance. I use Windows XP on a Lenovo t60p and I try to connect it to a Philips 32PFL7403D/12 LCD TV from VGA to a converter to S-video or video.

  Read the article

• Is having a [high-end] video card important on a server?

  - by Patrick

  My application is quite interactive application with lots of colors and drag-and-drop functionality, but no fancy 3D-stuff or animations or video, so I only used plain GDI (no GDI Plus, No DirectX). In the past my applications ran in desktops or laptops, and I suggested my customers to invest in a decent video card, with: a minimum resolution of 1280x1024 a minimum color depth of 24 pixels X Megabytes of memory on the video card Now my users are switching more and more to terminal servers, therefore my question: What is the importance of a video card on a terminal server? Is a video card needed anyway on the terminal server? If it is, is the resolution of the remote desktop client limited to the resolutions supported by the video card on the server? Can the choice of a video card in the server influence the performance of the applications running on the terminal server (but shown on a desktop PC)? If I start to make use of graphical libraries (like Qt) or things like DirectX, will this then have an influence on the choice of video card on the terminal server? Are calculations in that case 'offloaded' to the video card? Even on the terminal server? Thanks.

  Read the article

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20  | Next Page >