Search Results

Search found 18773 results on 751 pages for 'router configuration'.

Page 16/751 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Unstable wireless connection on Ubuntu only (router config problem?)

  - by crunch

  so I'm using Ubuntu 14.04 and I could connect to all Wi-Fi's that I've tried and it worked fine... Except for this router that I have at home. This connection seems to be unstable, it just randomly disconnects and reconnects. On the same machine I have Ubuntu 13.10 (same problem) and Windows 8 (no problem). Also there are no Wi-Fi problems when I connect with my Android phone. So I figured it must be some config issue. I tried tweaking some settings/restoring default on the router but I don't really know what I'm doing so, unsurprisingly, it didn't fix the problem.

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

• D-Link router WiFi and LAN segment

  - by StreetStrider

  I have D-Link 2650 router. Some wireless and wired clients connected to it. The problem is there is no interconnection between wireless and wired devices. For instance, when I start webserver on PC connected to wired LAN, WiFi devices cannot access it (other wired devices can). However all devices are in the same subnet: 192.168.1.x. How can I connect WiFi and LAN devices to one network? Or maybe what I should know first (any information with which I can proceed)?

  Read the article

• Unpacking a ZTE ZXV10 H108L router firmware

  - by v3ng3ful

  I binwalked a firmware of a ZTE ZXV10 H108L, and got some encouraging results of uImage uboot, and LZMA compression, as well as a Squashfs 3.0 LZMA compressed filesystem. 256 0x100 uImage header, header size: 64 bytes, header CRC: 0xE70BCBB9, created: Thu Nov 10 04:54:54 2011, image size: 804172 bytes, Data Address: 0x80002000, Entry Point: 0x80266000, data CRC: 0x6EFE90F1, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: MIPS Linux-2.6.20 320 0x140 LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 2637958 bytes 851968 0xD0000 Squashfs filesystem, big endian, lzma signature, version 3.0, size: 2543403 bytes, 632 inodes, blocksize: 65536 bytes, created: Thu Nov 10 04:56:12 2011 Now what I did is, to test several portions of the file (320byte-end, 851968byte-end, and many more) using dd, and trying with certain tools to uncompress/unpack the filesystem of the firmware. After some digging I found out the best tool to do this is the firmware_mod_kit, that understands a squashfs-lzma v3 filesystem. Although I ended up really frustrated as unsquashfs-lzma v3 reported a cold "zlib::uncompress failed, unknown error -3". Do you have any ideas? Could it be that, the firmware is corrupted on purpose to discourage attempts like this? Router file Thanks

  Read the article

• Router for creating site to site VPN to server provider using Cisco ASA 5540

  - by fondie

  We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

  Read the article

• Bypassing Router's DNS Settings

  - by Ramon Marco Navarro

  Is there a way to bypass my ISP provided CPE/router's DNS settings? I'd like to use OpenDNS but I am unable to access the administrator acount of the CPE. I tried logging in using the default passwords (admin/admin, admin/1234, etc) to no avail. I found out later that the admin password is generated using a generator where you input the CPE's MAC address. I tried emailing the manufacturer of the CPE (Huawei, the CPE is Huawei BM625) and my ISP but they aren't replying. I also saw similar queries (lots of them!) at Huawei's forums, without a single reply. So as a last resort, I'd like to know a way to bypass the CPE's DNS settings. My subscription is for a WiMAX service. I'm using Windows 7 and have already set the DNS settings for the Local Area Connection. But I still am not seeing the "You are already using OpenDNS" text at OpenDNS's site. And when explicitly using the OpenDNS servers I still seem to get 208.69.38.150 rather than the expected 208.69.38.160: nslookup www.opendns.com. 208.67.222.222 Server: resolver1.opendns.com Address: 208.67.222.222 Non-authoritative answer: Name: www.opendns.com Address: 208.69.38.150

  Read the article

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• wireless router - configuring for low-latency, high traffic environment

  - by Mark C

  Hey all, I have a few questions about configuring a router to achieve low-latency, high speed throughput on a local area network that is not connected to the internet. I've read up on some stuff, but thought I would solicit some opinions here on what I've found and what I want to know.... Turn off SSID broadcast - it produces extraneous packets that all clients receive and reply (?) to. Not a huge deal, but it may help a bit. Mixed-mode off - I should attempt to have all devices using the same standard (e.g. 802.11n) and turn mixed-mode off. Any thoughts on security? Does having WEP or any of the WPA variants actually increase latency? Nothing super secure is going over this LAN so if turning security off made things better, that'd be cool. Any other thoughts or things to focus on to create the low latency environment I'm trying to go for would be great. Links to webpages and papers are also cool. I'm open to go through a bunch of stuff. Thanks in advance!

  Read the article

• Netgear CG3000D new Modem/Router - Random High Ping

  - by justin.chmura

  Cox just recently came out and looked at my internet and decided that the modem I had was causing high latency issue. The speed was fine but the ping would spike to around 100 and over when gaming or putting a load more than browsing on the line. After they replaced it, it seems like I get better latency, but when it spikes, I get upwards of over 300 ping with like 500 jitter. I figured I would hit the serverfault universe before sending another email to Cox. I opted not to do the Cox setup as it was an extra $20 which I thought would have just setup the wireless (which I can handle). Is it a setting or something that I missed that needs to be setup? The firmware for the CG3000D is awful and not fun to use. I did change some hidden settings on the RgServices.asp page (I'll attach a screenshot). I've also heard that the Router/Modem combos are awful and that I should go back and just ask for a modem stand-alone. Any input is helpful. All screenshots: http://imgur.com/a/JX6qu#0

  Read the article

• Linux as a router for public networks

  - by nixnotwin

  My ISP had given me a /30 network. Later, when I wanted more public ips, I requested for a /29 network. I was told to keep using my earlier /30 network on the interface which is facing ISP, and the newly given /29 network should be used on the other interface which connects to my NAT router and servers. This is what I got from the isp: WAN IP: 179.xxx.4.128/30 CUSTOMER IP : 179.xxx.4.130 ISP GATEWAY IP:179.xxx.4.129 SUBNET : 255.255.255.252 LAN IPS: 179.xxx.139.224/29 GATEWAY IP :179.xxx.139.225 SUBNET : 255.255.255.248 I have a Ubuntu pc which has two interfaces. So I am planning to do the following: eth0 will be given 179.xxx.4.130/30 gateway 179.xxx.4.129 eth1 will be given 179.xxx.139.225/29 And I will have the following in the /etc/sysctl.conf: net.ipv4.ip_forward=1 These will be iptables rules: iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT My clients which have the ips 179.xxx.139.226/29 and 179.xxx.139.227/29 will be made to use 179.xxx.139.225/29 as gateway. Will this configuration work for me? Any comments? If it works, what iptables rules can I use to have a bit of security? P.S. Both networks are non-private and there is no NATing.

  Read the article

• Switched to new router and now experiencing lag?

  - by Mr_CryptoPrime

  I switched from a dynex-802.11b/g to a Netgear-802.11b/g/n just yesterday. My router is down stairs because my phoneline upstairs is retarded....but my PS3 is still upstairs (SOCOM: Confrontation is game I am experiencing issues). I have done everything I can to make sure the connection is solid and have checked the status and it has been as high as 80% and usually lingers at about 60%. I thought about upgrading my bandwidth from 1.5mbs to 7mbs, but I am guessing something is wrong if it worked fine before? Now the game seems more laggy and my voice chat is choppy. Others seem to receive my voice data fine because I can hear my own feedback clearly from other players (if you are in close proximity to another player and speak and there volume is loud enough sometimes you can hear yourself). I wonder if I port forward or setup DMZ then it will be fixed, but I am not sure and don't know quite how to do it. Has anyone else ever experienced this when switching routers? What did you do to fix it? Thanks!

  Read the article

• Can't access certain specific IP/domain on Windows 7

  - by jfrobishow

  Been banging my head on the wall for some time now. I have a fresh install of Windows 7 - Ultimate ~x86. Some IPs can't resolve properly, it doesn't matter if I try using Firefox, Chrome or IE I end up with a domain not found (server not found, etc.) I am behind a router, all the other computers aren't affected only this Win 7 machine. It's only certain sites. e.g. xkcd.com, facebook's cdn, google group. Things I have tried: flushdns ipconfig renew Disable IP v6 on the NIC Double checked that the computer was in the right timezone @ the right time. Reinstall the NIC driver. Again 90% of the sites will work but not the major one :P help!!!

  Read the article

• Iptables based router inside KVM virtual machine

  - by Anton

  I have KVM virtual machine (CentOS 6.2 x64), it has 2 NIC: eth0 - real external IP 1.2.3.4 (simplified example instead of real one) eth1 - local internal IP 172.16.0.1 Now I'm trying to make port mapping 1.2.3.4:80 = 172.16.0.2:80 Current iptables rules: # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A PREROUTING -p tcp -m tcp -d 1.2.3.4 --dport 80 -j DNAT --to-destination 172.16.0.2:80 COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 But there is nothing works, I mean it does not forwards that port. Similar configuration without virtualization seems to be working. What am I missing? Thanks!

  Read the article

• What is the best way to connect a 3 switches with a router?

  - by Carlos Morales

  Hello everyone, I'm trying to rebuild the network from my work and I was thinking what is the best way to connect three switches and a router. The router has 4 ports so I thought to connect 2 switches to the router (each switch connected with 2 cables to the router) and then connect the third switch to one of the others with two cables. So is like this, two cables from switch one to the router, two cables from switch two to the router and two cables from switch 3 to switch 1 or 2. So my questions are: Is it better to connect the router to each switch with a cable or the more cables you have the better? If I connect the switch 3 to switch 1 or 2 is it better to connect it with a cable or you get better performance with more cables. If I'm wrong and there is a better or more efficient way to connect them please let me know. The router is a Netgear RP114 (I'll upgrade it to a Sonicwall NSA 240), switch 1 is a Netgear GS748T, switch 2 is a Cisco Catalyst 2924-XL and switch 3 is a D-link DGS-1024D Thank you very much

  Read the article

• What is the best way to connect 3 switches with a router?

  - by Carlos Morales

  Hello everyone, I'm trying to rebuild the network from my work and I was thinking what is the best way to connect three switches and a router. The router has 4 ports so I thought to connect 2 switches to the router (each switch connected with 2 cables to the router) and then connect the third switch to one of the others with two cables. So is like this, two cables from switch one to the router, two cables from switch two to the router and two cables from switch 3 to switch 1 or 2. So my questions are: Is it better to connect the router to each switch with a cable or the more cables you have the better? If I connect the switch 3 to switch 1 or 2 is it better to connect it with a cable or you get better performance with more cables. If I'm wrong and there is a better or more efficient way to connect them please let me know. The router is a Netgear RP114 (I'll upgrade it to a Sonicwall NSA 240), switch 1 is a Netgear GS748T, switch 2 is a Cisco Catalyst 2924-XL and switch 3 is a D-link DGS-1024D Thank you very much

  Read the article

• Connect USB hard drive to wireless router on RJ45 port? Possible?

  - by lawphotog

  just a quick story behind. I was trying to set up wireless networked hard drive at home. My wireless router doesn't take USB. I am considering few options. First i was considering to get something like WD My Cloud. My router is an old one provided by service provider. It only has 10/100 Ethernet. WD My Cloud has Gigabit interface. So unless i changed a new router, data transfer will be slow. So upgrading the router is a must if i want fast transfer speed. Plus I already own an external hard drive with USB 3.0 interface. So if I get a router like Netgear D6300, i can get a decent speed wireless shared drive at home. And i can use my existing HDD instead of WD My Cloud. But the router isn't cheap so I am saving up for that. In the meantime I found out the existence of USB to RJ45 adaptor. I read the reviews and some say it works for them and for some don't. They didn't really say what they were trying to do so I'm confused. So if i bought an adaptor like this, can i connect my existing HDD (USB) with my existing router (RJ45) and use it as a shared drive for data transfer? I know it will be slow as the adaptor will only have USB 2.0 and 10/100 for Ethernet. But it's fine as it's for temporary until i got my new router.

  Read the article

• How do I configure AT&T's Uverse 2Wire 2701HGV-B Gateway into DMZPlus Mode?

  - by MasD

  I subscribed for AT&T's Uverse service and they shipped me a Wire 2701HGV-B Router/Gateway/Firewall/WiFi. I would like to configure AT&T's hardware to have less control and use my trusted Linksys WRT54-G router between my computers and the 2Wire Gateway. This seems to be a common configuration for Uverse users with this hardware in other forums, but requires a "DMZPlus" mode that I'm unfamiliar with.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• suggestions for firewall/router project using *BSD or Linux

  - by Adeodatus

  Hi All, I have a project in mind and I'd love to hear some ideas on some open source solutions with COTS hardware. I have a few 24 and/or 48 port managed layer2 switches with customers potentially on each port (though its usually about 20-30). Right now the switch has a bridged network and backhaul the traffic to our core to a centralized DHCP server. I need to move them to a NAT solution and, while doing this, I'd like to protect the customers on each port from the customer traffic on the other ports. I also need to be able to port forward from the public side of the firewall/nat box to specific hardware on the inside of the nat machine (easy enough, I know). My first thoughts are to build an appliance-like box (the fewer moving parts the better) that can do filtering and NAT with rfc1918 an address range being handed out via a DHCP server on the appliance. A caching DNS server on the appliance would be a plus since we backhaul everything to the core. I'd like to run FreeBSD but I'm open. Now, to try to limit the broadcast traffic thats visible I was thinking of doing each port on the switch as a different vlan and have the switch do trunking to the private NIC on the FreeBSD/appliance. I'd probably need to do some magic on the freebsd NIC to get this working but it should. We have the parts to build these systems. So, does this make sense? Are there any other solutions out there that we don't have to spend money on but can use our parts to create something? Are there any good distros that could do this already (monowall)?? I may or may not admin this solution so a secure web configuration and management tool would be a plus in the other admins' minds. Thoughts?

  Read the article

• Configuring CESoPSN using Cisco MWR 2941

  - by Rayne

  I'm trying to configure CESoPSN on two Cisco MWR 2941 routers, but the alarm LED lights are always lit. My configuration is modeled after this sample configuration. My setup is as follows: On the Cisco MWRs, E1 0/5 is configured to be CESoPSN, E1 0/9 is configured to be CESoPSN (CAS mode), and E1 0/7 is configured to be SAToP. The two MWRs are connected to each other via the GigabitEthernet port 0/2. The GigE ports are configured as a vlan because the ports are L2 ports and cannot be assigned an IP address directly. The two Cisco MWRs are connected to a traffic simulator, i.e. the traffic simulator will play out E1 traffic to MWR 1 and record the output traffic from MWR 2. On my traffic simulator, when it's connected to the E1 ports 0/5 and 0/9 (both CESoPSN configurations), the "Remote" alarm is on. However, when connected to the E1 ports 0/7 (SAToP configuration), no alarms were on. The GigE connection seems to be working fine (both LED lights on the 2 ports are green). The SAToP configuration seems to be fine too (Left LED is green, right LED is off on both E1 0/7 ports). However, both CESoPSN configurations seem to be not working (Left LED is green, right LED is yellow on both E1 0/5 and 0/9 ports). I don't know if there's anything wrong with my configuration for the CESoPSN, as I'm very new to this. The relevant portions of the configuration are as follows: MWR 1: controller E1 0/5 clock source internal cem-group 5 timeslots 1-31 description E1 CESoPSN example ! controller E1 0/7 clock source internal cem-group 7 unframed description E1 SATOP example ! controller E1 0/9 mode cas clock source internal cem-group 9 timeslots 1-24 description E1 CESoPSN CAS example ! interface Loopback0 ip address 30.30.30.1 255.255.255.255 ! interface GigabitEthernet0/2 switchport access vlan 100 mpls ip ! interface CEM0/5 no ip address cem 5 xconnect 30.30.30.2 305 encapsulation mpls ! ! interface CEM0/7 no ip address cem 7 xconnect 30.30.30.2 307 encapsulation mpls ! ! interface CEM0/9 no ip address cem 9 signaling inband-cas xconnect 30.30.30.2 309 encapsulation mpls ! ! interface Vlan100 ip address 50.50.50.1 255.255.255.0 no ptp enable mpls ip ! no ip classless ip forward-protocol nd ip route 30.30.30.2 255.255.255.255 50.50.50.2 ! MWR 2: controller E1 0/5 clock source internal cem-group 5 timeslots 1-31 description E1 CESoPSN example ! controller E1 0/7 clock source internal cem-group 7 unframed ! controller E1 0/9 mode cas clock source internal cem-group 9 timeslots 1-24 description E1 CESoPSN CAS example ! interface Loopback0 ip address 30.30.30.2 255.255.255.255 ! interface GigabitEthernet0/2 switchport access vlan 100 mpls ip ! interface CEM0/5 no ip address cem 5 xconnect 30.30.30.1 305 encapsulation mpls ! ! interface CEM0/7 no ip address cem 7 xconnect 30.30.30.1 307 encapsulation mpls ! ! interface CEM0/9 no ip address cem 9 signaling inband-cas xconnect 30.30.30.1 309 encapsulation mpls ! ! interface Vlan100 ip address 50.50.50.2 255.255.255.0 no ptp enable mpls ip ! no ip classless ip forward-protocol nd ip route 30.30.30.1 255.255.255.255 50.50.50.1 ! If anyone is familiar with CESoPSN configurations, please advise.

  Read the article

• AT&T U-verse 2Wire Router - Increase session table limit?

  - by caleban

  AT&T U-verse VDSL "fiber to the node" 24Mbit down / 3Mbit up 2Wire Router Model 3800HGV-B Software Version 6.1.9.24-enh.tm The 2Wire router appears to have a limit of 1024 TCP and UDP sessions. This limit appears to apply to all sessions regardless of any static IP, firewall off, DMZ plus, secondary router configurations. I've tried using the 2Wire router alone and also configuring the 2Wire static IP addressing, firewall off, DMZ plus, etc. setup along with my own pfSense router/firewall. Either way it appears I exceed the 1024 session limit and sessions start being reset. Running out of sessions isn't being caused by torrents or p2p etc. We're a business and our legitimate uses are exceeding this session limit. AT&T tells me it's not possible to bridge the router or increase or avoid the session table limit. I'm curious if anyone has found a way around either of these issues.

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• When connected through a router, a new gateway appears, and I lose my internet connection.

  - by idan315

  I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. (Just to be clear: the computer using Windows XP can connect to the internet without any problem). This entire question is about the PC using Windows 7. The only symptom of this problem is that when I see my network devices, in addition to my router (which appears as "Network 4", or something of the sort), I also see an "Unidentified Network". When using ipconfig to check the problem, I see a second gateway, with the IP 0.0.0.0, in addition to the IP of my router.

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >