Search Results

Search found 4343 results on 174 pages for 'verizon wireless'.

Page 161/174 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

  - by Paula

  I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

  Read the article

• Windows 7 BSOD with Service Exception Error and Randomly Reboots

  - by Jason Shultz

  I've got a windows 7 laptop that BSOD with a Service Exception Error when I connect to a wireless network. It also does it when it's just sitting still doing nothing. I ran bluescreenview and here are the last four BSOD's from today: ================================================== Dump File : 051210-18642-01.dmp Crash Time : 5/12/2010 8:36:14 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06fda160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-18642-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-16551-01.dmp Crash Time : 5/12/2010 8:41:04 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06f40160 Parameter 4 : 00000000`00000000 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+70600 File Description : NT Kernel & System Product Name : Microsoft® Windows® Operating System Company : Microsoft Corporation File Version : 6.1.7600.16539 (win7_gdr.100226-1909) Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-16551-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-17269-01.dmp Crash Time : 5/12/2010 8:45:51 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`07db1160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-17269-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-19453-01.dmp Crash Time : 5/12/2010 5:46:25 PM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`02625160 Parameter 4 : 00000000`00000000 Caused By Driver : win32k.sys Caused By Address : win32k.sys+2d4201 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-19453-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ==================================================  

  Read the article

• How do I find out the Mac Address Firefox submits for Geolocation?

  - by Jim McKeeth

  I moved, but have the same router and cable box. Now when I visit Google Maps it still shows my old location. I went to the SkyhookWireless update page to update my Mac Address with my new location. The process is you put in your Mac address and it shows you the current location, and then you adjust that location and submit it. When I got the Mac Address from the status page on my router Skyhook reported that location as in Pakistan, which isn't even the correct continent (as my old or new address). I tried every other Mac address I could come up with: The cable router, the Wireless router's other Mac address, my PC's Mac address, etc. and none of them reported any location on the Skyhook page. So I am guessing that there is another Mac address, or some other bit of information that is used by Firefox when it reports to Google Maps my current location. Now that you have the back story, how do I find the Mac address or whatever information it is that Firefox (or other browsers) use to determine my Geolocation? Everything I have read online is rather vague. The next option I am considering is hooking a logging proxy onto Firefox and seeing what data it sends, but I'd rather find an easier method. Related: How do I update the geo location of my house?

  Read the article

• What is the best keyboard for typing speed (not layouts)

  - by Gapton

  So I am a programmer, and I like playing typing speed games. My typing speed is, for common English words, 85 to 90 wpm, max 95. I type on various devices, my laptop, desktop, office pc.... they all have slightly different keyboards. Being a curious programmer, I wonder what types of keyboard is used for the highest possible typing speed. Or let me phrase it in another way, what is the type of keyboards that people use in typing speed contest? Here is something I know that I feel like I can share: It must be a wired keyboard, I can feel the lag as I am typing this on my wireless keyboard, even if it is a slightly more expensive model which claims to have zero lag. I know people prefer a mechanical keyboard, for the hepatic feedback, however I have not tried one. It lasts longer and is noisy, it also does not have the problem of normal keyboards where you press many keys at a time the signals will get all jammed and the computer will only receive one or two keys. I personally prefer those "thin profile" keyboards. I type a lot, and 95 wpm put me in the top 5%, this is of course just on a gaming site. However when I type on the fat keyboards, my fingers have to travel a much longer distance before the keys actually click. This is where I find myself typing much faster with those thin profile keyboards found on my laptop. Because my fingers only hover on the keys and I only need to press a short distance, each stroke takes less force and light rapid strokes is what makes me type fast. When I type on a fat keyboard, I was forced to use heavy strokes, and this slows me down. There must be some people out there who are keyboard scientists, who actually do experiments and user tests with different setups. It would be interesting to understand more about the things we use everyday for not just work but a majority of our communications. P.S. this is about hardware and not about switching keyboard layouts to dvorak

  Read the article

• How to avoid intrusion detection/anti spoofing issue on a sonicwall TZ series FW

  - by Ian

  We have a sonicwall tz series FW with two internet service providers connected. One of the providers has a wireless service which works a bit like an ethernet switch in that we have an ip with a /24 subnet and the gateway is .1. All other clients on the same subnet (say 195.222.99.0) have the same .1 gateway - this is important, read on. Some of our clients are also on the same subnet. Our config: X0 : Lan X1 : 89.90.91.92 X2 : 195.222.99.252/24 (GW 195.222.99.1) X1 and X2 are not connected, other than both being connected to the public Internet. Client config: X1 : 195.222.99.123/24 (GW 195.222.99.1) What fails, what works: Traffic 195.222.99.123 (client) <- 89.90.91.92 (X1) : Spoof alert Traffic 195.222.99.123 (client) <- 195.222.99.252 (X1) : OK - no spoof alert I have several clients with IPs in the 195.222.99.0 range and all provoke identical alerts. This is the alert I see on the FW: Alert Intrusion Prevention IP spoof dropped 195.222.99.252, 21475, X1 89.90.91.92, 80, X1 MAC address: 00:12:ef:41:75:88 Anti-spoofing is switched off on my FW (network-mac-ip-anti-spoofing - config for each interface) for all ports I can provoke the alerts by telneting to a port on X1 from the clients. You can't argue with the logic - this is suspicious traffic. X1 is receiving traffic with a source IP which corresponds to X2s subnet. Anyone know how can I tell the FW that packets with a src subnet of 195.222.99.0 can legitimately appear on X1? I know whats going wrong, I've seen the same thing before, but with higher end FWs you can avoid this with a few extra rules. I can't see how to do this here. And before you ask why we're using this service provider - they give us 3ms (yep 3ms, thats not an error) delay between routers.

  Read the article

• Prevent Cisco VPN from interrupting home networking

  - by jkohlhepp

  I just got a new laptop, and for the most part have left its settings alone. Today I was trying to get some sharing going between my desktop and the laptop. Both machines are connected to the same wireless network and both machines consider that network to be a Home network. Both are running Win7 Home Premium. It seems like my laptop is aware of my desktop on the network. It can ping it by IP or by computer name. When I go to Network from the laptop, I can see the desktop in the list of computers. However, my desktop cannot ping the laptop, nor can it see it within Network. My desktop has a Homegroup set up, but my laptop says "There is currently no homegroup on the network". I do have network discovery turned on for both machines. Why can my desktop not "talk" to my laptop but it works the other way around? Update: Disabling the Windows Firewall on the laptop somewhat fixes the problem. With it disabled, my desktop can ping my laptop, but still my laptop can't see the homegroup. Also, it can ping via hostname, which resolves to IPv6, but can't ping via the IPv4 address. Obviously I'd rather not leave my firewall disabled, so I need a more specific fix. Update 2: Aha! It is the Cisco VPN software I was running to connect to work computers. Once I disconnected and exited from that, the two PCs seemed to be talking normally and the homegroup was visible to the laptop. So now my question has morphed: how can I prevent Cisco VPN from interrupting my home networking?

  Read the article

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• IPv4 not enabled in Windows 7

  - by RidDeBakTiYar

  I have a Netbook with Win 7 Starter edition. I am not able to get IPv4 enabled/installed in the Netbook and hence not able to network/connect to Internet. It says "Limited access" when I check connections. It all began when my system crashed and I was not able to get thro beyond the boot screen. The system advice me to try repair with the original OS cd and I did the same. After that the Netbook has booted, but is not able to network. On a detailed study I found that the Network adapter has both IPv4 and IPv6 Protocols, but there are some differences. The IPv4 is not having the "Properties" enabled to configure, while the IPv6 is having "Properties" enabled. I have only a IPv4 Wired and Wireless at home and its not able to get the Netbook connected as it cannot I had tried uninstalling the Adapter to allow windows to automatically detect and install. Using the "netsh" command to uninstall and install, but not having any change in status. There is a option to "Have disk" under add Protocol, but I don't know how to give the standard IPv4 for installation (asking for *.inf). Any help in solving the issue will be very much appreciated

  Read the article

• Can I run a mix of static addressing and NAT?

  - by aroth

  Let's say that an ISP offers a plan with 5 static IP addresses, but I have more than 5 devices, many of which (such as a networked printer, for instance) I do not want or need to have a static IP address. So the topography I'm planning goes something like: ISP -> Router -> Switch -> Computer (static address) -> Computer (static address) -> Printer (DHCP/NAT) -> Tv (DHCP/NAT) -> (...) -> Wireless Devices (DHCP/NAT) Generally speaking, is it possible to run a network like that? If not, then what sort of setup do I need so that I can assign static addresses just to the things that need them, and use DHCP/NAT for everything else? Also, what internal networking devices will consume a static IP address? I'm pretty sure the router will, correct? Does the switch also?

  Read the article

• Completely automated DVD insert-rip-compress-eject workflow

  - by Kevin L.

  (Partially inspired by this question.) Background: I have a PC hidden away behind an HD LCD in custom-built entertainment center. The only visible part of the PC is an external DVD drive, mounted above the Wii. The PC happens to have Windows XP on it; Hackintoshing and Linux might be possible, but I've had issues with drivers for the sound card before. Let's just assume that OS X and Linux are a no-go unless they provide a truly awesome and simple solution for this particular problem. Goal: I would like to have a completely automated workflow for ripping DVDs. Something like this: Push the eject button on the DVD drive, insert the DVD. PC recognizes that this is a video DVD (as opposed to data). PC rips DVD to hard drive. PC finishes ripping, and ejects the DVD tray. PC compresses DVD image into some format that an Xbox 360 can read. PC copies finished compressed video file to a particular folder, so that it can be read into a WMP11 library and seamlessly played by the Xbox 360. PC cleans up all temporary files. Done. The impetus to have this be completely automated is that I’ll never need to switch the TV to the PC’s input and fiddle with the wireless keyboard. That’s just needless user intervention. The UI doesn’t have to be pretty. Nor do I care about speed. And I can probably bridge several of the gaps with some creative Perl use. But it seems likely that many (or all) of the parts should already exist. Any thoughts?

  Read the article

• Server Names Inside Private Network

  - by thyandrecardoso

  Our office has a private network, where any requests on a (pre-determined) public IP are forwarded to a private IP inside said network. On that private IP, we've got a server running several services, including HTTP servers, and SCM systems. We only control our private network, having no control on the public IP configuration. We bought a domain name, and pointed it to that public IP, so people can access our services from the outside. But, when inside the office, people can't use that DNS name, because the server and any other hosts inside the network share the same public IP! For desktops, inside the office network, dealing with names is really easy: one entry on the hosts file and we're done. However, for laptops, that keep going in and out, and need to access services inside the office, the naming is really annoying. I don't know the "standard" process for dealing with these kind of situations. I've considered installing BIND in the office, and make people configure their wireless and wired connections to use that DNS server. What is the correct approach in this situation? If using BIND (or any other DNS server) is the answer, how should I configure it so that people inside the office can use it to get our custom names, and get forwarded to the ISP DNS when trying to reach the internet?

  Read the article

• Windows CE restores default configuration after restart (Motorola MC3190)

  - by jarek

  Good morning, everyone! I have a problem with Motorola MC3190 hand scanner running on Windows CE. I've got few of those to make a new program for some kind of warehouse. There is already installed program which have been used by the customers before, so I delete this one and instead I install my new software which I've just made. It is running very well, but when I take out the battery and leave the device for entire night without power supply, it restores the whole configuration, so the old program is back, the wireless configuration is back and... Yeah. The scanner is restored to the configuration which was running when I received it few weeks ago. What I want to do is to set the whole configuration of the scanner so after a long power-off my program and my configuration will be restored. I truly believe someone knows how to do it. The time is running out, and I believe that the customer will be kind of annoyed when he will change the battery and the program which he bought will be gone. ;-) Regards, Jarek

  Read the article

• Internet connection & IIS stopped on windows xp after VMware server 2 installation

  - by Eduardo Xavier

  Hi, I'm running a local network. My IP ranges from 192.168.1.2 to 192.168.1.15. All IP are static ones. And my router's IP is 192.168.1.1 and I provide it as default gateway and preferred DNS server on client machines. Everything worked fine on this scenario. I could use internet and reach services on other machines. BUT I have installed VMware server 2 on the windows XP to host windows 2003 Virtual Machine (VM). I set the following configuration: Windows XP's => 192.168.1.11. Windows 2003 => 192.168.1.12. (virtual machine) This approach worked just fine as it used to work with Microsoft Virtual PC. I can access mysql & IIS websites on the windows 2003 virtual machine. BUT two things doesn't work anymore on the Windows XP: internet connection - but I can see the MAC address on the wireless router IIS - Ping on 127.0.0.1 it's ok as I can hit localhost:8222 nor localhost Does anyone knows how to fix any of this? (at least the internet connection)

  Read the article

• OS X can't copy files from Windows Home Server...over wifi.

  - by John Clayton

  I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks!

  Read the article

• Bridged network on OS X only gets UDP broadcast traffic

  - by a paid nerd

  I've created a bridged network Mac OS X 10.8.5 using ifconfig and TUNTAP for OS X to bridge my wireless connection, en0, with a virtual interface, tap0, which I can use for guest VMs: $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 28:cf:xx:xx:xx:xx inet6 xxxx::xxxx:xxxx:xxxx:xxxx%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.64 netmask 0xffffff00 broadcast 192.168.100.1 media: autoselect status: active bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) However, if I tcpdump -i tap0, I only see broadcast traffic. Shouldn't I see a mirror of everything on en0? (192.168.100.33, the host doing the broadcasting, is another unrelate, noisy server on my LAN.) (I asked a similar question here and will probably close it.)

  Read the article

• Problem linking two Cisco routers with a static route

  - by Chris Kaczor

  I'm trying to link two Cisco routers with a static route and I haven't been able to get it working as expected. Here is the basic setup: Router 1 - WRV210 - 192.168.1.1 - connected to cable modem Router 2 - RV120W - 192.168.2.1 I already have several machines on Router 1 that are working and I want to setup Router 2 with a few other machines on the different subnet. Here is what I've configured: Connected the WAN port on Router 2 to a LAN port on Router 1 Configured Router 1 to give 192.168.1.2 to Router 2 via DHCP Configured Router 1 with a static route (192.168.2.0 mask 255.255.255.0) to 192.168.1.2 using the LAN & Wireless interface Disabled the firewall on Router 2 (since it is covered by Router 1) Configured Router 2 to "Router" mode instead of "NAT" mode Configured Router 2 with a static route (192.168.1.0 mask 255.255.255.0) to 192.168.1.1 using the WAN interface From the research I've done I think that should be enough but things aren't working exactly as expected: Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) A machine on Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) A machine on Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) Router 1 and a machine on Router 1 can ping 192.168.1.2 (Router 2 itself) I'm confused as to why Router 1 cannot talk to the 192.168.2.0/255.255.255.0 subnet. Any help would be greatly appreciated.

  Read the article

• What do "Unknown SSAP" and "Unknown DSAP" mean in tcpdump?

  - by lacker

  While trying to fix a problem with intermittently losing internet connection on a machine with a wireless connection to a router, I ran tcpdump and noticed packets with "Unknown SSAP" and "Unknown DSAP" errors coming at a rate of a few per second. 20:27:21.703178 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 171 20:27:21.724726 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 104 20:27:21.746449 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe4 Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:21.970963 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe8 Information, send seq 0, rcv seq 16, Flags [Response], length 76 20:27:22.016565 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:22.038471 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 171 What does the "Unknown SSAP" and "Unknown DSAP" mean, and does it indicate a problem?

  Read the article

• Windows 7 - Windows XP - sharing - why isn't working?

  - by durumdara

  Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

• Dropbox failing to update?

  - by Mick

  I have two PC's at home. One XP the other Windows 7-64bit. I have a word document that I edit on either PC - to enable this I have the file stored in a Dropbox folder. This usually works fine - but sometimes I find that the file does not get updated on my windows7 PC. I.e. I edit the file on my Windows XP machine, then go to my Windows 7 PC and see that there is a previous, old, datestamp on the file and sure enough if I open up the file to have a look, I see that the latest edits are not included. If I right-click on the file and select "Browse on Dropbox website" I see that the latest file is correctly there. Surely there must be some option to say please update this file - but can find no such thing. Has something gone wrong? I should point out that my wireless internet connection is a little intermittent - could this have caused some glitch? By the way I do not leave the old file open in word on my Windows-7 PC as I can well imagine that would cause trouble. Also I should mention that the icon on the document has the little green tick on it showing that Dropbox is not in the process of doing a transfer. Also the Dropbox icon in my system tray also has the green tick - so Dropbox is not busy transferring some other file(s). If I hover the mouse over the Dropbox icon I get the tooltip "All files up to date".

  Read the article

• How to restore broken Ethernet functionality on Mac G5 running Mac OS 10.4.11 (Tiger)

  - by willc2

  I had a disk error that rendered my Mac unbootable. I repaired it with Tech Tool 4, but now networking does not work. Network Preferences reports that my Ethernet cable is unplugged. I know this is bogus because when I boot from an emergency partition, networking works correctly. Furthermore, wireless networking is also broken, which I tested with a known-good Wi-Fi dongle. Whenever I try to change Network Port Configurations by creating a New or Renaming an existing one, example: I get this message in the console: Error - PortScanner - setDevice, device == nil! Error - PortScanner - setDevice, device == nil! In sets of two as shown. When I try to invoke the Network Diagnostics app, it immediately crashes. My first thought is to reinstall Tiger with the Archive and Install method so I don't have to reinstall all my applications but I have lost my Tiger installer disk. My next thought is to buy Leopard for $107 on Amazon. If there is any way I can just repair my Tiger install I would be happy to save that money, though. This is not my main machine and I am loathe to put more money into it. How can I recover my network functionality? UPDATE: I found my Tiger install disk and tried an Archive and Install. It failed with an unhelpful error message along the lines of "Can't install, try again". I tried again but had the same error. My guess is, some corrupt or missing file in my User folder is preventing migration. I have a backup created with Super Duper that is a bit out of date but will startup the machine (with functional networking). I would love to just copy over the file(s) that got messed up but I don't even know where to look. What is the likely location of the System files that would cause the aforementioned symptoms?

  Read the article

• can't ssh within LAN, but can connect from outside

  - by Patrick B.

  A strange issue: I have a desktop running Ubuntu 10.04 behind a Netgear WNR1000 router performing NAT. I would like to be able to ssh into the desktop from my laptop (running Windows 7 and Cygwin). When at home, both the desktop and the laptop are connected by wireless (the desktop is in a different room from the router). sshd seems to be running fine, since ssh localhost from the desktop works without trouble. Also, ssh my.ip.address from my laptop when it is not behind the router works fine (I am forwarding port 22 on the router to my desktop). However, ssh same.ip.address from within the LAN fails with "Connection refused". ssh 192.168.local.ip.address fails with a different message, "Connection timed out". I can connect if I first ssh to a machine outside the LAN. So far I haven't found anything with Google because with the search terms that seem like they would be relevant, the vast majority of people have the opposite problem - i.e., they can't connect from outside the LAN but can connect within it. I can port forward through a remote server when I'm at home, but this seems like a totally absurd way to connect two computers on the same home LAN. I have already tried stopping and starting sshd on the desktop. Any thoughts?

  Read the article

• OS X won't see Windows 7 in network (and vice versa)

  - by meds

  I've enabled SMB sharing in OS X Lion and have added folders to share, it says 'Windows Sharing: On' with a green circle next to it (from the sharing window) and that to access the volume I will need to to go to \\192.168.0.17. It also says that the OS X should be visible as 'macbook' in the network. Both my WIndows 7 and OS X are connected to the same network, yet when I try to go to \\192.168.0.17 or from the Mac try to go to my Windows system (smb://192.168.0.6) the two OSs don't see each other. Any ideas why? Attempting to ping the Mac from Windows results in this output in the command prompt: Pinging 192.168.0.17 with 32 bytes of data: Reply from 192.168.0.6: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.0.17: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), ipconfig in Windows is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::8918:efd1:b05c:890f%21 IPv4 Address. . . . . . . . . . . : 192.168.0.6 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::98ab:63fc:3c07:d837%13 IPv4 Address. . . . . . . . . . . : 192.168.74.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::80ff:c575:7b50:3a10%14 IPv4 Address. . . . . . . . . . . : 192.168.21.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{2E97D0AE-9E18-4072-AC23-1979BA0DCB79}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{E260CE43-E9A7-4DE0-A88E-4EAFF68ACDDB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{A5130812-59CE-4DDF-9C35-9433BCED9831}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{134BCAE7-CFFF-4A98-8DA0-3708806AABEB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{8D9E3B8F-161C-4ACE-B211-3EDD694416B2}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : in OS X: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether c8:2a:14:01:24:c1 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether e0:f8:47:0c:fe:04 inet6 fe80::e2f8:47ff:fe0c:fe04%en1 prefixlen 64 scopeid 0x5 inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255 media: autoselect status: active p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 02:f8:47:0c:fe:04 media: autoselect status: inactive fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 70:cd:60:ff:fe:d8:f1:32 media: autoselect <full-duplex> status: inactive

  Read the article

• Lose internet connection, yet online games continue

  - by Mike

  For the past week or so, my internet connection has been anything but stable. Restarting my modem/router always fixes the problems, but since it has occurred so often, I'm noticing confusing patterns which I was hoping someone could help answer. My internet connection kicks out about 4-5 times a day. The sure-fire way to fix it is to restart my all-in-one modem/router. Sometimes I can diagnose the problem on my laptop which resets my wireless network adapter and fixes the problem, but not always. If that doesn't fix the problem, it usually reports that the connection between the modem and internet is the problem which requires a restart of the router. The odd thing which baffles me is that my connection is supposedly lost such that no browsers can connect to sites, yet things like online games still continue to play without issue. How is this possible? I thought maybe the game was running locally on my PC but that couldn't be the answer because I was still getting messages from other players. So my real question is: How can my internet browsers (firefox, chrome, even IE) lose connection to the internet, but other applications like online games not? Am I actually losing connection or am I mistaken? Edit: I'd also like to add that netflix on my PS3 which is directly connected to the same access point will also lose connection. So internet browsers and netflix lose their internet connection while online games continue without an issue.

  Read the article

• Ctrl + 1 and Ctrl + 2 key combinations don't work

  - by musicfreak

  I noticed back in August (when I got StarCraft 2) that the key combinations Ctrl + 1 and Ctrl + 2 didn't work. I thought this was weird because Ctrl + 3 and all the other combinations worked fine (including Shift + 1, etc), so I didn't think much of it; I just shrugged it off as a SC2 bug. Now, 4 months later, I decided to play a completely unrelated game--Dawn of War 2--and noticed the same thing: those two specific key combinations don't work. To make sure I wasn't going insane, I tried it in Chrome and a couple other applications, and alas, it didn't work. I remember playing strategy games over the summer before StarCraft 2 and it worked fine. Any idea as to what went wrong? My keyboard, a Microsoft Wireless Keyboard 1000 (I know, insert Microsoft joke here), is a little over a year old, so I'm going to assume it's not dying until proven otherwise. Things I've tried ActiveHotkeys says the key combination is not a global hotkey. Tried another keyboard--still doesn't work. The key combinations do work in a virtual machine (tried with both Windows and Ubuntu as guests).

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >