Search Results

Search found 5259 results on 211 pages for 'interrupt handling'.

Page 162/211 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

  • debian lenny xen bridge networking problem

    - by Sasha
    DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

    Read the article

  • Linux IPTables / routing issue

    - by Jon
    Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

    Read the article

  • Book &ldquo;Team Foundation Server 2012 Starter&rdquo; published!

    - by Jakob Ehn
    During the summer and fall this year, me and my colleague Terje Sandstrøm has worked together on a book project that has now finally hit the stores! The title of the book is Team Foundation Server 2012 Starter and is published by Packt Publishing. You can find it at http://www.packtpub.com/team-foundation-server-2012-starter/book or from Amazon http://www.amazon.com/dp/1849688389                          The book is part of a concept that Packt have with starter-books, intended for people new to Team Foundation Server 2012 and who want a quick guideline to get it up and working. It covers the fundamentals, from installing and configuring it, and how to use it with source control, work items and builds. It is done as a step-by-step guide, but also includes best practices advice in the different areas. It covers the use of both the on-premises and the TFS Services version. It also has a list of links and references in the end to the most relevant Visual Studio 2012 ALM sites. Our good friend and fellow ALM MVP Mathias Olausson have done the review of the book, thanks again Mathias! We hope the book fills the gap between the different online guide sites and the more advanced books that are out. Check it out and please let us know what you think of the book! Book Description Your quick start guide to TFS 2012, top features, and best practices with hands on examples Overview Install TFS 2012 from scratch Get up and running with your first project Streamline release cycles for maximum productivity In Detail Team Foundation Server 2012 is Microsoft's leading ALM tool, integrating source control, work item and process handling, build automation, and testing. This practical "Team Foundation Server 2012 Starter Guide" will provide you with clear step-by-step exercises covering all major aspects of the product. This is essential reading for anyone wishing to set up, organize, and use TFS server. This hands-on guide looks at the top features in Team Foundation Server 2012, starting with a quick installation guide and then moving into using it for your software development projects. Manage your team projects with Team Explorer, one of the many new features for 2012. Covering all the main features in source control to help you work more efficiently, including tools for branching and merging, we will delve into the Agile Planning Tools for planning your product and sprint backlogs. Learn to set up build automation, allowing your team to become faster, more streamlined, and ultimately more productive with this "Team Foundation Server 2012 Starter Guide". What you will learn from this book Install TFS 2012 on premise Access TFS Services in the cloud Quickly get started with a new project with product backlogs, source control, and build automation Work efficiently with source control using the top features Understand how the tools for branching and merging in TFS 2012 help you isolate work and teams Learn about the existing process templates, such as Visual Studio Scrum 2.0 Manage your product and sprint backlogs using the Agile planning tools Approach This Starter guide is a short, sharp introduction to Team Foundation Server 2012, covering everything you need to get up and running. Who this book is written for If you are a developer, project lead, tester, or IT administrator working with Team Foundation Server 2012 this guide will get you up to speed quickly and with minimal effort.

    Read the article

  • What’s the use of code reuse?

    - by Tony Davis
    All great developers write reusable code, don’t they? Well, maybe, but as with all statements regarding what “great” developers do or don’t do, it’s probably an over-simplification. A novice programmer, in particular, will encounter in the literature a general assumption of the importance of code reusability. They spend time worrying about DRY (don’t repeat yourself), moving logic into specific “helper” modules that they can then reuse, agonizing about the minutiae of the class structure, inheritance and interface design that will promote easy reuse. Unfortunately, writing code specifically for reuse often leads to complicated object hierarchies and inheritance models that are anything but reusable. If, instead, one strives to write simple code units that are highly maintainable and perform a single function, in a concise, isolated fashion then the potential for reuse simply “drops out” as a natural by-product. Programmers, of course, care about these principles, about encapsulation and clean interfaces that don’t expose inner workings and allow easy pluggability. This is great when it helps with the maintenance and development of code but how often, in practice, do we actually reuse our code? Most DBAs and database developers are familiar with the practical reasons for the limited opportunities to reuse database code and its potential downsides. However, surely elsewhere in our code base, reuse happens often. After all, we can all name examples, such as date/time handling modules, which if we write with enough care we can plug in to many places. I spoke to a developer just yesterday who looked me in the eye and told me that in 30+ years as a developer (a successful one, I’d add), he’d never once reused his own code. As I sat blinking in disbelief, he explained that, of course, he always thought he would reuse it. He’d often agonized over its design, certain that he was creating code of great significance that he and other generations would reuse, with grateful tears misting their eyes. In fact, it never happened. He had in his head, most of the algorithms he needed and would simply write the code from scratch each time, refining the algorithms and tailoring the code to meet the specific requirements. It was, he said, simply quicker to do that than dig out the old code, check it, correct the mistakes, and adapt it. Is this a common experience, or just a strange anomaly? Viewed in a certain light, building code with a focus on reusability seems to hark to a past age where people built cars and music systems with the idea that someone else could and would replace and reuse the parts. Technology advances so rapidly that the next time you need the “same” code, it’s likely a new technique, or a whole new language, has emerged in the meantime, better equipped to tackle the task. Maybe we should be less fearful of the idea that we could write code well suited to the system requirements, but with little regard for reuse potential, and then rewrite a better version from scratch the next time.

    Read the article

  • Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark (TOTD #184)

    - by arungupta
    TOTD #183 explained how to build a WebSocket-driven application using GlassFish 4. This Tip Of The Day (TOTD) will explain how do view/debug on-the-wire messages, or frames as they are called in WebSocket parlance, over this upgraded connection. This blog will use the application built in TOTD #183. First of all, make sure you are using a browser that supports WebSocket. If you recall from TOTD #183 then WebSocket is combination of Protocol and JavaScript API. A browser supporting WebSocket, or not, means they understand your web pages with the WebSocket JavaScript. caniuse.com/websockets provide a current status of WebSocket support in different browsers. Most of the major browsers such as Chrome, Firefox, Safari already support WebSocket for the past few versions. As of this writing, IE still does not support WebSocket however its planned for a future release. Viewing WebSocket farmes require special settings because all the communication happens over an upgraded HTTP connection over a single TCP connection. If you are building your application using Java, then there are two common ways to debug WebSocket messages today. Other language libraries provide different mechanisms to log the messages. Lets get started! Chrome Developer Tools provide information about the initial handshake only. This can be viewed in the Network tab and selecting the endpoint hosting the WebSocket endpoint. You can also click on "WebSockets" on the bottom-right to show only the WebSocket endpoints. Click on "Frames" in the right panel to view the actual frames being exchanged between the client and server. The frames are not refreshed when new messages are sent or received. You need to refresh the panel by clicking on the endpoint again. To see more detailed information about the WebSocket frames, you need to type "chrome://net-internals" in a new tab. Click on "Sockets" in the left navigation bar and then on "View live sockets" to see the page. Select the box with the address to your WebSocket endpoint and see some basic information about connection and bytes exchanged between the client and the endpoint. Clicking on the blue text "source dependency ..." shows more details about the handshake. If you are interested in viewing the exact payload of WebSocket messages then you need a network sniffer. These tools are used to snoop network traffic and provide a lot more details about the raw messages exchanged over the network. However because they provide lot more information so they need to be configured in order to view the relevant information. Wireshark (nee Ethereal) is a pretty standard tool for sniffing network traffic and will be used here. For this blog purpose, we'll assume that the WebSocket endpoint is hosted on the local machine. These tools do allow to sniff traffic across the network though. Wireshark is quite a comprehensive tool and we'll capture traffic on the loopback address. Start wireshark, select "loopback" and click on "Start". By default, all traffic information on the loopback address is displayed. That includes tons of TCP protocol messages, applications running on your local machines (like GlassFish or Dropbox on mine), and many others. Specify "http" as the filter in the top-left. Invoke the application built in TOTD #183 and click on "Say Hello" button once. The output in wireshark looks like Here is a description of the messages exchanged: Message #4: Initial HTTP request of the JSP page Message #6: Response returning the JSP page Message #16: HTTP Upgrade request Message #18: Upgrade request accepted Message #20: Request favicon Message #22: Responding with favicon not found Message #24: Browser making a WebSocket request to the endpoint Message #26: WebSocket endpoint responding back You can also use Fiddler to debug your WebSocket messages. How are you viewing your WebSocket messages ? Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

    Read the article

  • OpenVPN on Ubuntu 11.10 - unable to redirect default gateway

    - by Vladimir Kadalashvili
    I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user): openvpn --config /home/vladimir/client.ovpn Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others: NOTE: unable to redirect default gateway -- Cannot read current default gateway from system I think it's the cause of this problem, but unfortunately I don't know how to fix it. Below is full output of openvpn command: Sat Jun 9 23:51:36 2012 OpenVPN 2.2.0 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Sat Jun 9 23:51:36 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sat Jun 9 23:51:36 2012 Control Channel Authentication: tls-auth using INLINE static key file Sat Jun 9 23:51:36 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 LZO compression initialized Sat Jun 9 23:51:36 2012 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ] Sat Jun 9 23:51:36 2012 Socket Buffers: R=[126976->200000] S=[126976->200000] Sat Jun 9 23:51:36 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sat Jun 9 23:51:36 2012 Local Options hash (VER=V4): '504e774e' Sat Jun 9 23:51:36 2012 Expected Remote Options hash (VER=V4): '14168603' Sat Jun 9 23:51:36 2012 UDPv4 link local: [undef] Sat Jun 9 23:51:36 2012 UDPv4 link remote: [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:37 2012 TLS: Initial packet from [AF_INET]94.229.78.130:1194, sid=13fd921b b42072ab Sat Jun 9 23:51:37 2012 VERIFY OK: depth=1, /CN=OpenVPN_CA Sat Jun 9 23:51:37 2012 VERIFY OK: nsCertType=SERVER Sat Jun 9 23:51:37 2012 VERIFY OK: depth=0, /CN=OpenVPN_Server Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sat Jun 9 23:51:38 2012 [OpenVPN_Server] Peer Connection Initiated with [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:40 2012 SENT CONTROL [OpenVPN_Server]: 'PUSH_REQUEST' (status=1) Sat Jun 9 23:51:40 2012 PUSH: Received control message: 'PUSH_REPLY,explicit-exit-notify,topology subnet,route-delay 5 30,dhcp-pre-release,dhcp-renew,dhcp-release,route-metric 101,ping 5,ping-restart 40,redirect-gateway def1,redirect-gateway bypass-dhcp,redirect-gateway autolocal,route-gateway 5.5.0.1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,register-dns,comp-lzo yes,ifconfig 5.5.117.43 255.255.0.0' Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:4: dhcp-pre-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:5: dhcp-renew (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:6: dhcp-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: register-dns (2.2.0) Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: timers and/or timeouts modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: explicit notify parm(s) modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: LZO parms modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ifconfig/up options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route-related options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sat Jun 9 23:51:40 2012 ROUTE: default_gateway=UNDEF Sat Jun 9 23:51:40 2012 TUN/TAP device tun0 opened Sat Jun 9 23:51:40 2012 TUN/TAP TX queue length set to 100 Sat Jun 9 23:51:40 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sat Jun 9 23:51:40 2012 /sbin/ifconfig tun0 5.5.117.43 netmask 255.255.0.0 mtu 1500 broadcast 5.5.255.255 Sat Jun 9 23:51:45 2012 NOTE: unable to redirect default gateway -- Cannot read current default gateway from system Sat Jun 9 23:51:45 2012 Initialization Sequence Completed Output of route command: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 ppp0 5.5.0.0 * 255.255.0.0 U 0 0 0 tun0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0 stream-ts1.net. * 255.255.255.255 UH 0 0 0 ppp0 Output of ifconfig command: eth0 Link encap:Ethernet HWaddr 6c:62:6d:44:0d:12 inet6 addr: fe80::6e62:6dff:fe44:d12/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54594 errors:0 dropped:0 overruns:0 frame:0 TX packets:59897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44922107 (44.9 MB) TX bytes:8839969 (8.8 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4561 errors:0 dropped:0 overruns:0 frame:0 TX packets:4561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:685425 (685.4 KB) TX bytes:685425 (685.4 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:213.206.63.44 P-t-P:213.206.34.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:53577 errors:0 dropped:0 overruns:0 frame:0 TX packets:58892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:43667387 (43.6 MB) TX bytes:7504776 (7.5 MB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.117.43 P-t-P:5.5.117.43 Mask:255.255.0.0 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:27:19:f6:b5:cf inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::227:19ff:fef6:b5cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12079 errors:0 dropped:0 overruns:0 frame:0 TX packets:11178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1483691 (1.4 MB) TX bytes:4307899 (4.3 MB) So my question is - how to make OpenVPN redirect default gateway? Thanks!

    Read the article

  • OSB and Coherence Integration

    - by mark.ms.smith
    Anyone who has tried to manage Coherence nodes or tried to cache results in OSB, will appreciate the new functionality now available. As of WebLogic Server 10.3.4, you can use the WebLogic Administration Server, via the Administration Console or WLST, and java-based Node Manager to manage and monitor the life cycle of stand-alone Coherence cache servers. This is a great step forward as the previous options mainly involved writing your own scripts to do this. You can find an excellent description of how this works at James Bayer’s blog. You can also find the WebLogic documentation here.As of Oracle Service Bus 11gR1 (11.1.1.3.0), OSB now supports service result caching for Business Bervices with Coherence. If you use Business Services that return somewhat static results that do not change often, you can configure those Business Services to cache results. For Business Services that use result caching, you can control the time to live for the cached result. After the cached result expires, the next Business Service call results in invoking the back-end service to get the result. This result is then stored in the cache for future requests to access. I’m thinking that this caching functionality would be perfect for some sort of cross reference data that was refreshed nightly by batch. You can find the OSB Business Service documentation here.Result Caching in a dedicated JVMThis example demonstrates these new features by configuring a OSB Business Service to cache results in a separate Coherence JVM managed by WebLogic. The reason why you may want to use a separate, dedicated JVM is that the result cache data could potentially be quite large and you may want to protect your OSB java heap.In this example, the client will call an OSB Proxy Service to get Employee data based on an Employee Id. Using a Business Service, OSB calls an external system. The results are automatically cached and when called again, the respective results are retrieved from the cache rather than the external system.Step 1 – Set up your Coherence Server Via the OSB Administration Server Console, create your Coherence Server to be used as the results cache.Here are the configured Coherence Server arguments from the Server Start tab. Note that I’m using the default Cache Config and Override files in the domain.-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m -Dtangosol.coherence.override=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-override.xml -Dtangosol.coherence.cluster=OSB-cluster -Dtangosol.coherence.cacheconfig=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-cache-config.xml -Dtangosol.coherence.distributed.localstorage=true -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dcom.sun.management.jmxremote Just incase you need it, here is my Coherence Server classpath:/app/middleware/jdev_11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar: /app/middleware/jdev_11.1.1.4/modules/features/weblogic.server.modules.coherence.server_10.3.4.0.jar: /app/middleware/jdev_11.1.1.4/oracle_osb/lib/osb-coherence-client.jarBy default, OSB will try and create a local result cache instance. You need to disable this by adding the following JVM parameters to each of the OSB Managed Servers:-Dtangosol.coherence.distributed.localstorage=false -DOSB.coherence.cluster=OSB-clusterIf you need more information on configuring a remote result cache, have a look at the configuration documentration under the heading Using an Out-of-Process Coherence Cache Server.Step 2 – Configure your Business Service Under the respective Business Service Message Handling Configuration (Advanced Properties), you need to enable “Result Caching”. Additionally, you need to determine what the cache data will be keyed on. In the example below, I’m keying it on the unique Employee Id.The Results As this test was on my laptop, the actual timings are just an indication that there is a benefit to caching results. Using my test harness, I sent 10,000 requests to OSB, all with the same Employee Id. In this case, I had result caching disabled.You can see that this caused the back end Business Service (BS_GetEmployeeData) to be called for each request. Then after enabling result caching, I sent the same number of identical requests.You can now see the Business Service was only invoked once on the first request. All subsequent requests used the Results Cache.

    Read the article

  • Is there a Generic USB TouchScreen Driver 12.04?

    - by lbjoum
    Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

    Read the article

  • Improving SAS multipath to JBOD performance on Linux

    - by user36825
    Hello all I'm trying to optimize a storage setup on some Sun hardware with Linux. Any thoughts would be greatly appreciated. We have the following hardware: Sun Blade X6270 2* LSISAS1068E SAS controllers 2* Sun J4400 JBODs with 1 TB disks (24 disks per JBOD) Fedora Core 12 2.6.33 release kernel from FC13 (also tried with latest 2.6.31 kernel from FC12, same results) Here's the datasheet for the SAS hardware: http://www.sun.com/storage/storage_networking/hba/sas/PCIe.pdf It's using PCI Express 1.0a, 8x lanes. With a bandwidth of 250 MB/sec per lane, we should be able to do 2000 MB/sec per SAS controller. Each controller can do 3 Gb/sec per port and has two 4 port PHYs. We connect both PHYs from a controller to a JBOD. So between the JBOD and the controller we have 2 PHYs * 4 SAS ports * 3 Gb/sec = 24 Gb/sec of bandwidth, which is more than the PCI Express bandwidth. With write caching enabled and when doing big writes, each disk can sustain about 80 MB/sec (near the start of the disk). With 24 disks, that means we should be able to do 1920 MB/sec per JBOD. multipath { rr_min_io 100 uid 0 path_grouping_policy multibus failback manual path_selector "round-robin 0" rr_weight priorities alias somealias no_path_retry queue mode 0644 gid 0 wwid somewwid } I tried values of 50, 100, 1000 for rr_min_io, but it doesn't seem to make much difference. Along with varying rr_min_io I tried adding some delay between starting the dd's to prevent all of them writing over the same PHY at the same time, but this didn't make any difference, so I think the I/O's are getting properly spread out. According to /proc/interrupts, the SAS controllers are using a "IR-IO-APIC-fasteoi" interrupt scheme. For some reason only core #0 in the machine is handling these interrupts. I can improve performance slightly by assigning a separate core to handle the interrupts for each SAS controller: echo 2 /proc/irq/24/smp_affinity echo 4 /proc/irq/26/smp_affinity Using dd to write to the disk generates "Function call interrupts" (no idea what these are), which are handled by core #4, so I keep other processes off this core too. I run 48 dd's (one for each disk), assigning them to cores not dealing with interrupts like so: taskset -c somecore dd if=/dev/zero of=/dev/mapper/mpathx oflag=direct bs=128M oflag=direct prevents any kind of buffer cache from getting involved. None of my cores seem maxed out. The cores dealing with interrupts are mostly idle and all the other cores are waiting on I/O as one would expect. Cpu0 : 0.0%us, 1.0%sy, 0.0%ni, 91.2%id, 7.5%wa, 0.0%hi, 0.2%si, 0.0%st Cpu1 : 0.0%us, 0.8%sy, 0.0%ni, 93.0%id, 0.2%wa, 0.0%hi, 6.0%si, 0.0%st Cpu2 : 0.0%us, 0.6%sy, 0.0%ni, 94.4%id, 0.1%wa, 0.0%hi, 4.8%si, 0.0%st Cpu3 : 0.0%us, 7.5%sy, 0.0%ni, 36.3%id, 56.1%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 1.3%sy, 0.0%ni, 85.7%id, 4.9%wa, 0.0%hi, 8.1%si, 0.0%st Cpu5 : 0.1%us, 5.5%sy, 0.0%ni, 36.2%id, 58.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 5.0%sy, 0.0%ni, 36.3%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 5.1%sy, 0.0%ni, 36.3%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu8 : 0.1%us, 8.3%sy, 0.0%ni, 27.2%id, 64.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 0.1%us, 7.9%sy, 0.0%ni, 36.2%id, 55.8%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 0.0%us, 7.8%sy, 0.0%ni, 36.2%id, 56.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 0.0%us, 7.3%sy, 0.0%ni, 36.3%id, 56.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 0.0%us, 5.6%sy, 0.0%ni, 33.1%id, 61.2%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 0.1%us, 5.3%sy, 0.0%ni, 36.1%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 0.0%us, 4.9%sy, 0.0%ni, 36.4%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 0.1%us, 5.4%sy, 0.0%ni, 36.5%id, 58.1%wa, 0.0%hi, 0.0%si, 0.0%st Given all this, the throughput reported by running "dstat 10" is in the range of 2200-2300 MB/sec. Given the math above I would expect something in the range of 2*1920 ~= 3600+ MB/sec. Does anybody have any idea where my missing bandwidth went? Thanks!

    Read the article

  • ASP.NET Routing not working on IIS 7.0

    - by Rick Strahl
    I ran into a nasty little problem today when deploying an application using ASP.NET 4.0 Routing to my live server. The application and its Routing were working just fine on my dev machine (Windows 7 and IIS 7.5), but when I deployed (Windows 2008 R1 and IIS 7.0) Routing would just not work. Every time I hit a routed url IIS would just throw up a 404 error: This is an IIS error, not an ASP.NET error so this doesn’t actually come from ASP.NET’s routing engine but from IIS’s handling of expressionless URLs. Note that it’s clearly falling through all the way to the StaticFile handler which is the last handler to fire in the typical IIS handler list. In other words IIS is trying to parse the extension less URL and not firing it into ASP.NET but failing. As I mentioned on my local machine this all worked fine and to make sure local and live setups match I re-copied my Web.config, double checked handler mappings in IIS and re-copied the actual application assemblies to the server. It all looked exactly matched. However no workey on the server with IIS 7.0!!! Finally, totally by chance, I remembered the runAllManagedModulesForAllRequests attribute flag on the modules key in web.config and set it to true: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <add name="ScriptCompressionModule" type="Westwind.Web.ScriptCompressionModule,Westwind.Web" /> </modules> </system.webServer> And lo and behold, Routing started working on the live server and IIS 7.0! This seems really obvious now of course, but the really tricky thing about this is that on IIS 7.5 this key is not necessary. So on my Windows 7 machine ASP.NET Routing was working just fine without the key set. However on IIS 7.0 on my live server the same missing setting was not working. On IIS 7.0 this key must be present or Routing will not work. Oddly on IIS 7.5 it appears that you can’t even turn off the behavior – setting runtAllManagedModuleForAllRequests="false" had no effect at all and Routing continued to work just fine even with the flag set to false, which is NOT what I would have expected. Kind of disappointing too that Windows Server 2008 (R1) can’t be upgraded to IIS 7.5. It sure seems like that should have been possible since the OS server core changes in R2 are pretty minor. For the future I really hope Microsoft will allow updating IIS versions without tying them explicitly to the OS. It looks like that with the release of IIS Express Microsoft has taken some steps to untie some of those tight OS links from IIS. Let’s hope that’s the case for the future – it sure is nice to run the same IIS version on dev and live boxes, but upgrading live servers is too big a deal to do just because an updated OS release came out. Moral of the story – never assume that your dev setup will work as is on the live setup. It took me forever to figure this out because I assumed that because my web.config on the local machine was fine and working and I copied all relevant web.config data to the server it can’t be the configuration settings. I was looking everywhere but in the .config file forever before getting desperate and remembering the flag when I accidentally checked the intellisense settings in the modules key. Never assume anything. The other moral is: Try to keep your dev machine and server OS’s in sync whenever possible. Maybe it’s time to upgrade to Windows Server 2008 R2 after all. More info on Extensionless URLs in IIS Want to find out more exactly on how extensionless Urls work on IIS 7? The check out  How ASP.NET MVC Routing Works and its Impact on the Performance of Static Requests which goes into great detail on the complexities of the process. Thanks to Jeff Graves for pointing me at this article – a great linked reference for this topic!© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7  Windows  

    Read the article

  • WordPress not resizing images with Nginx + php-fpm and other issues

    - by Julian Fernandes
    Recently i setup a Ubuntu 12.04 VPS with 512mb/1ghz CPU, Nginx + php-fpm + Varnish + APC + Percona's MySQL server + CloudFlare Pro for our Ubuntu LoCo Team's WordPress blog. The blog get about 3~4k daily hits, use about 180MB and 8~20% CPU. Everything seems to be working insanely fast... page load is really good and is about 16x faster than any of our competitors... but there is one problem. When we upload a image, WordPress don't resize it, so all we can do it insert the full image in the post. If the imagem have, let's say, 30kb, it resize fine... but if the image have 100kb+, it won't... In nginx error logs i see this: upstream timed out (110: Connection timed out) while reading response header from upstream, client: 150.162.216.64, server: www.ubuntubrsc.com, request: "POST /wp-admin/async-upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "www.ubuntubrsc.com", referrer: "http://www.ubuntubrsc.com/wp-admin/media-upload.php?post_id=2668&" It seems to be related with the issue, but i dunno. When that timeout happens, i started to get it when i'm trying to view a post too: upstream timed out (110: Connection timed out) while reading response header from upstream, client: 150.162.216.64, server: www.ubuntubrsc.com, request: "GET /tutoriais-gimp-6-adicionando-aplicando-novos-pinceis.html HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "www.ubuntubrsc.com", referrer: "http://www.ubuntubrsc.com/" And only a restart of php5-fpm fix it. I tryed increasing some timeouts and stuffs but it did not worked, so i guess it's some kind of limitation i did not figured yet. Could someone help me with it, please? /etc/nginx/nginx.conf: user www-data; worker_processes 1; pid /var/run/nginx.pid; events { worker_connections 1024; use epoll; multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 15; keepalive_requests 2000; types_hash_max_size 2048; server_tokens off; server_name_in_redirect off; open_file_cache max=1000 inactive=300s; open_file_cache_valid 360s; open_file_cache_min_uses 2; open_file_cache_errors off; server_names_hash_bucket_size 64; # server_name_in_redirect off; client_body_buffer_size 128K; client_header_buffer_size 1k; client_max_body_size 2m; large_client_header_buffers 4 8k; client_body_timeout 10m; client_header_timeout 10m; send_timeout 10m; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## error_log /var/log/nginx/error.log; access_log off; ## # CloudFlare's IPs (uncomment when site goes live) ## set_real_ip_from 204.93.240.0/24; set_real_ip_from 204.93.177.0/24; set_real_ip_from 199.27.128.0/21; set_real_ip_from 173.245.48.0/20; set_real_ip_from 103.22.200.0/22; set_real_ip_from 141.101.64.0/18; set_real_ip_from 108.162.192.0/18; set_real_ip_from 190.93.240.0/20; real_ip_header CF-Connecting-IP; set_real_ip_from 127.0.0.1/32; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; gzip_vary on; gzip_proxied any; gzip_comp_level 9; gzip_min_length 1000; gzip_proxied expired no-cache no-store private auth; gzip_buffers 32 8k; # gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/fastcgi_params: fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 4k; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; /etc/nginx/sites-avaiable/default: ## # DEFAULT HANDLER # ubuntubrsc.com ## server { listen 8080; # Make site available from main domain server_name www.ubuntubrsc.com; # Root directory root /var/www; index index.php index.html index.htm; include /var/www/nginx.conf; access_log off; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location ~ /\. { deny all; access_log off; log_not_found off; } location ~* ^/wp-content/uploads/.*.php$ { deny all; access_log off; log_not_found off; } rewrite /wp-admin$ $scheme://$host$uri/ permanent; error_page 404 = @wordpress; log_not_found off; location @wordpress { include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_NAME /index.php; fastcgi_param SCRIPT_FILENAME $document_root/index.php; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; if (-f $request_filename) { fastcgi_pass unix:/var/run/php5-fpm.sock; } } } server { listen 8080; server_name ubuntubrsc.* www.ubuntubrsc.net www.ubuntubrsc.org www.ubuntubrsc.com.br www.ubuntubrsc.info www.ubuntubrsc.in; return 301 $scheme://www.ubuntubrsc.com$request_uri; } /var/www/nginx.conf: # BEGIN W3TC Minify cache location ~ /wp-content/w3tc/min.*\.js$ { types {} default_type application/x-javascript; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ /wp-content/w3tc/min.*\.css$ { types {} default_type text/css; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ /wp-content/w3tc/min.*js\.gzip$ { gzip off; types {} default_type application/x-javascript; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header Content-Encoding gzip; } location ~ /wp-content/w3tc/min.*css\.gzip$ { gzip off; types {} default_type text/css; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header Content-Encoding gzip; } # END W3TC Minify cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; try_files $uri $uri/ $uri.html /index.php?$args; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc .gzip; } if (-f $request_filename$w3tc_enc) { rewrite (.*) $1$w3tc_enc break; } rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Skip 404 error handling by WordPress for static files if (-f $request_filename) { break; } if (-d $request_filename) { break; } if ($request_uri ~ "(robots\.txt|sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { break; } if ($request_uri ~* \.(css|js|htc|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml|asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$) { return 404; } # END W3TC Skip 404 error handling by WordPress for static files # BEGIN Better WP Security location ~ /\.ht { deny all; } location ~ wp-config.php { deny all; } location ~ readme.html { deny all; } location ~ readme.txt { deny all; } location ~ /install.php { deny all; } set $susquery 0; set $rule_2 0; set $rule_3 0; rewrite ^wp-includes/(.*).php /not_found last; rewrite ^/wp-admin/includes(.*)$ /not_found last; if ($request_method ~* "^(TRACE|DELETE|TRACK)"){ return 403; } set $rule_0 0; if ($request_method ~ "POST"){ set $rule_0 1; } if ($uri ~ "^(.*)wp-comments-post.php*"){ set $rule_0 2$rule_0; } if ($http_user_agent ~ "^$"){ set $rule_0 4$rule_0; } if ($rule_0 = "421"){ return 403; } if ($args ~* "\.\./") { set $susquery 1; } if ($args ~* "boot.ini") { set $susquery 1; } if ($args ~* "tag=") { set $susquery 1; } if ($args ~* "ftp:") { set $susquery 1; } if ($args ~* "http:") { set $susquery 1; } if ($args ~* "https:") { set $susquery 1; } if ($args ~* "(<|%3C).*script.*(>|%3E)") { set $susquery 1; } if ($args ~* "mosConfig_[a-zA-Z_]{1,21}(=|%3D)") { set $susquery 1; } if ($args ~* "base64_encode") { set $susquery 1; } if ($args ~* "(%24&x)") { set $susquery 1; } if ($args ~* "(\[|\]|\(|\)|<|>|ê|\"|;|\?|\*|=$)"){ set $susquery 1; } if ($args ~* "(&#x22;|&#x27;|&#x3C;|&#x3E;|&#x5C;|&#x7B;|&#x7C;|%24&x)"){ set $susquery 1; } if ($args ~* "(%0|%A|%B|%C|%D|%E|%F|127.0)") { set $susquery 1; } if ($args ~* "(globals|encode|localhost|loopback)") { set $susquery 1; } if ($args ~* "(request|select|insert|concat|union|declare)") { set $susquery 1; } if ($http_cookie !~* "wordpress_logged_in_" ) { set $susquery "${susquery}2"; set $rule_2 1; set $rule_3 1; } if ($susquery = 12) { return 403; } # END Better WP Security /etc/php5/fpm/php-fpm.conf: pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log emergency_restart_threshold = 3 emergency_restart_interval = 1m process_control_timeout = 10s events.mechanism = epoll /etc/php5/fpm/php.ini (only options i changed): open_basedir ="/var/www/" disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,dl,system,shell_exec,fsockopen,parse_ini_file,passthru,popen,proc_open,proc_close,shell_exec,show_source,symlink,proc_close,proc_get_status,proc_nice,proc_open,proc_terminate,shell_exec ,highlight_file,escapeshellcmd,define_syslog_variables,posix_uname,posix_getpwuid,apache_child_terminate,posix_kill,posix_mkfifo,posix_setpgid,posix_setsid,posix_setuid,escapeshellarg,posix_uname,ftp_exec,ftp_connect,ftp_login,ftp_get,ftp_put,ftp_nb_fput,ftp_raw,ftp_rawlist,ini_alter,ini_restore,inject_code,syslog,openlog,define_syslog_variables,apache_setenv,mysql_pconnect,eval,phpAds_XmlRpc,phpA ds_remoteInfo,phpAds_xmlrpcEncode,phpAds_xmlrpcDecode,xmlrpc_entity_decode,fp,fput,virtual,show_source,pclose,readfile,wget expose_php = off max_execution_time = 30 max_input_time = 60 memory_limit = 128M display_errors = Off post_max_size = 2M allow_url_fopen = off default_socket_timeout = 60 APC settings: [APC] apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 64M apc.optimization = 0 apc.num_files_hint = 4096 apc.ttl = 60 apc.user_ttl = 7200 apc.gc_ttl = 0 apc.cache_by_default = 1 apc.filters = "" apc.mmap_file_mask = "/tmp/apc.XXXXXX" apc.slam_defense = 0 apc.file_update_protection = 2 apc.enable_cli = 0 apc.max_file_size = 10M apc.stat = 1 apc.write_lock = 1 apc.report_autofilter = 0 apc.include_once_override = 0 apc.localcache = 0 apc.localcache.size = 512 apc.coredump_unmap = 0 apc.stat_ctime = 0 /etc/php5/fpm/pool.d/www.conf user = www-data group = www-data listen = /var/run/php5-fpm.sock listen.owner = www-data listen.group = www-data listen.mode = 0666 pm = ondemand pm.max_children = 5 pm.process_idle_timeout = 3s; pm.max_requests = 50 I also started to get 404 errors in front page if i use W3 Total Cache's Page Cache (Disk Enhanced). It worked fine untill somedays ago, and then, out of nowhere, it started to happen. Tonight i will disable my mobile plugin and activate only W3 Total Cache to see if it's a conflict with them... And to finish all this, i have been getting this error: PHP Warning: apc_store(): Unable to allocate memory for pool. in /var/www/wp-content/plugins/w3-total-cache/lib/W3/Cache/Apc.php on line 41 I already modifed my APC settings, but no sucess. So... could anyone help me with those issuees, please? Ooohh... if it helps, i instaled PHP like this: sudo apt-get install php5-fpm php5-suhosin php-apc php5-gd php5-imagick php5-curl And Nginx from the official PPA. Sorry for my bad english and thanks for your time people! (:

    Read the article

  • TiVo Follow-up&hellip;Training Opportunities

    - by MightyZot
    A few posts ago I talked about my experience with TiVo Customer Service. While I didn’t receive bad service per se, I felt like the reps could have communicated better. I made the argument that it should be just as easy to leave a company as it is to engage with a company, even though my intention is to remain a TiVo fan. I worked for DataStorm Technologies in the early 90s. I pointed out to another developer that we were leaving files behind in our installations. My opinion was that, if the customer is uninstalling our application, there should be no trace of it left after uninstall except for the customer’s data. He replied with, “screw ‘em. They’re leaving us. Why do we care if we left anything behind?” Wow. Surely there is a lot of arrogance in that statement. Think about this…how often do you change your services, devices, or whatever?  Personally, I change things up about once every two or three years. If I don’t change things up, I at least think about it. So, every two or three years there is an opportunity for you (as a vendor or business) to sell me something. (That opportunity actually exists all the time, because there are many of these two or three year periods overlapping.) Likewise, you have the opportunity to win back my business every two or three years as well. Customer service on exit is just as important as customer service during engagement because, every so often, you have another chance to gain back my loyalty. If you screw that up on exit, your chances are close to zero. In addition, you need to consider all of the potential or existing customers that are part of or affected by my social organizations. “Melissa” at TiVo gave me a call last week and set up some time to talk about my experience. We talked yesterday and she gave me a few moments to pontificate about my thoughts on the importance of a complete customer experience. She had listened to my customer support calls and agreed that I had made it clear that I intended to remain a TiVo customer even though suddenLink is handling my subscription. She said that suddenLink is a very important partner for them and, of course, they want to do everything they can to support TiVo / suddenLink customers.  “Melissa” also said that they had turned this experience into a training opportunity for the reps involved. I hope that is true, because that “programmer arrogance” that I mentioned above (which was somewhat pervasive back then) may be part of the reason why that company is no longer around. Good job “Melissa”!  And, like I said, I am still a TiVo fan. In fact, we love our new TiVo and many of the great new features. In addition, if you’re one of the two people that read these posts, please remember that these are just opinions. Your experiences may be, and likely will be, completely unique to you.

    Read the article

  • Network traffic is not being forwarded from a VM to the network using a bridged interface with Xen + libvirt

    - by foob
    I'm having trouble getting network access from a VM that I'm running using Xen and libvirt. I've been trying different things and reading similar posts online for a couple of days but I'm really stuck at this point. If anybody could offer some insight it would be much appreciated. I have a VM that I'm running on a host with a bridge set up as br0 and an interface eth0 on a 192.168.60.0/24 subnet. The networking portion of the libvirt configuration xml is: <interface type='bridge'> <mac address='ff:a0:d1:e5:07:de'/> <source bridge='br0'/> <script path='/etc/xen/scripts/vif-bridge'/> <model type='virtio' /> </interface> When I start the VM a vif6.0 interface is created on the host and the ifconfig output is: br0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet addr:192.168.60.33 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3570 (3.4 KiB) TX bytes:3508 (3.4 KiB) eth0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:492 (492.0 b) Interrupt:19 Memory:fe8f0000-fe900000 vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:6660 (6.5 KiB) TX bytes:468 (468.0 b) virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) The 'brctl show' output seems to show the bridge being configured correctly: br0 8000.00a0d1e507de no eth0 vif6.0 The ifcfg-eth0 contents in the VM are: DEVICE=eth0 BOOTPROTO=static HWADDR=FF:A0:D1:E5:07:DE IPADDR=192.168.60.133 NETMASK=255.255.255.0 ONBOOT=yes and the output of ifconfig in the VM look like what I would expect: eth0 Link encap:Ethernet HWaddr FF:A0:D1:E5:07:DE inet addr:192.168.60.133 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::fda0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:468 (468.0 b) TX bytes:7780 (7.5 KiB) but when I try to ssh or ping another computer I get 'no route to host.' Using tcpdump on the host system I tried to see if I could narrow down where the problem is: # tcpdump -vv -i vif6.0 tcpdump: WARNING: vif6.0: no IPv4 address assigned tcpdump: listening on vif6.0, link-type EN10MB (Ethernet), capture size 96 bytes 14:49:40.833997 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:41.833314 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:42.833309 arp who-has 192.168.60.35 tell 192.168.60.133 So the VM is sending out out an arp who-has packet when I try to ssh to 192.168.60.35. I think that this means the setup within the VM is ok and that this is an issue on the host system. If I run tcpdump with the interface of br0 then I don't see these arp packets. My thought here is that the packets are being blocked before going on to the bridge somehow. I tried adding an iptables rule to resolve this: -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT but it didn't work. I also tried the following: /sbin/sysctl -w net.bridge.bridge-nf-call-ip6tables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-arptables=0 /sbin/sysctl -w net.ipv4.ip_forward=1 which had no impact. Is it obvious to somebody who has more experience than me what I'm missing here? Should vif6.0 have the same MAC address is eth0 in the vm? Do I need more rules in my iptables? Thanks for any help!

    Read the article

  • Podcast Show Notes: Collaborate 10 Wrap-Up - Part 1

    - by Bob Rhubart
    OK, I know last week I promised you a program featuring Oracle ACE Directors Mike van Alst (IT-Eye) and Jordan Braunstein (TUSC) and The Definitive Guide to SOA: Oracle Service Bus author Jeff Davies. But things happen. In this case, what happened was Collaborate 10 in Las Vegas. Prior to the event I asked Oracle ACE Director and OAUG board member Floyd Teter to see if he could round up a couple of people at the event for an impromtu interview over Skype (I was here in Cleveland) to get their impressions of the event. Listen to Part 1 Floyd, armed with his brand new iPad, went above and beyond the call of duty. At the appointed hour, which turned out to be about hour after the close of Collaborate 10,  Floyd had gathered nine other people to join him in a meeting room somewhere in the Mandalay Bay Convention Center. Here’s the entire roster: Floyd Teter - Project Manager at Jet Propulsion Lab, OAUG Board Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Mark Rittman - EMEA Technical Director and Co-Founder, Rittman Mead,  ODTUG Board Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Chet Justice - OBI Consultant at BI Wizards Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Elke Phelps - Oracle Applications DBA at Humana, OAUG SIG Chair Blog | LinkedIn | Oracle Mix | Book | Oracle ACE Profile Paul Jackson - Oracle Applications DBA at Humana Blog | LinkedIn | Oracle Mix | Book Srini Chavali - Enterprise Database & Tools Leader at Cummins, Inc Blog | LinkedIn | Oracle Mix Dave Ferguson – President, Oracle Applications Users Group LinkedIn | OAUG Profile John King - Owner, King Training Resources Website | LinkedIn | Oracle Mix Gavyn Whyte - Project Portfolio Manager at iFactory Consulting Blog | Twitter | LinkedIn | Oracle Mix John Nicholson - Channels & Alliances at Greenlight Technologies Website | LinkedIn Big thanks to Floyd for assembling the panelists and handling the on-scene MC/hosting duties.  Listen to Part 1 On a technical note, this discussion was conducted over Skype, using Floyd’s iPad, placed in the middle of the table.  During the call the audio was fantastic – the iPad did a remarkable job. Sadly, the Technology Gods were not smiling on me that day. The audio set-up that I tested successfully before the call failed to deliver when we first connected – I could hear the folks in Vegas, but they couldn’t hear me. A frantic, last-minute adjustment appeared to have fixed that problem, and the audio in my headphones from both sides of the conversation was loud and clear.  It wasn’t until I listened to the playback that I realized that something was wrong. So the audio for Vegas side of the discussion has about the same fidelity as a cell phone. It’s listenable, but disappointing when compared to what it sounded like during the discussion. Still, this was a one shot deal, and the roster of panelists and the resulting conversation was too good and too much fun to scrap just because of an unfortunate technical glitch.   Part 2 of this Collaborate 10 Wrap-Up will run next week. After that, it’s back on track with the previously scheduled program. So stay tuned: RSS del.icio.us Tags: oracle,otn,collborate 10,c10,oracle ace program,archbeat,arch2arch,oaug,odtug,las vegas Technorati Tags: oracle,otn,collborate 10,c10,oracle ace program,archbeat,arch2arch,oaug,odtug,las vegas

    Read the article

  • KVM/Libvirt bridged/routed networking not working on newer guest kernels

    - by SharkWipf
    I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

    Read the article

  • PHP Web Services - Nice try

    Thanks to the membership in the O'Reilly User Group Programme the Mauritius Software Craftsmanship Community (short: MSCC) recently received a welcome package with several book titles. Among them is the latest publication of Lorna Jane Mitchell - 'PHP Web Services: APIs for the Modern Web'. Following is the book review I put on Amazon: Nice try! Initially, I was astonished that a small book like 'PHP Web Services' would be able to cover all the interesting topics about APIs and Web Services, independently whether they are written in PHP or not. And unfortunately, the title isn't able to stand up to the readers (or at least my) expectations. Maybe as a light defense, there is no usual paragraph about the intended audience of that book, but still I have to admit that the first half (chapters 1 to 8) are well written and Lorna has her points on the various technologies. Also, the code samples in PHP are clean and easy to understand. With chapter 'Debugging Web Services' the book started to change my mind about the clarity of advice and the instructions on designing and developing good APIs. Eventually, this might be related to the fact that I'm used to other tools since years, like Telerik Fiddler as HTTP proxy in order to trace and inspect any kind of request/response handling. Including localhost monitoring, SSL certification acceptance, and the ability to debug mobile devices, especially iOS-based ones. Compared to Charles, Fiddler is available for free. What really got me off the hook is the following statement in chapter 10 about Service Type Decisions: "For users who have larger systems using technology stacks such as Java, C++, or .NET, it may be easier for them to integrate with a SOAP service." WHAT? A couple of pages earlier the author recommends to stay away from 'old-fashioned' API styles like SOAP (if possible). And on top of that I wonder why there are tons of documentation towards development of RESTful Web Services based on WebAPI. The ASP.NET stack clearly moves away from SOAP to JSON and REST since years! Honestly, as a software developer on the .NET stack this leaves a mixed feeling after all. As for the remaining chapters I simply consider them as 'blah blah' without any real value and lots of theoretical advice. Related to the chapter 13 about 'Documentation', I just had the 'pleasure' to write a C#-based client against a Java-based SOAP Web Service. Personally, I take the WSDL as the master reference in the first place and Visual Studio generates all the stub types involved in the communication. During the implementation and testing I came across a 'java.lang.NullPointerException' in various methods and for various method parameters. The WSDL and the generated types were declared as Nullable, so nothing to worry about, or? Well, I logged in a support ticket, and guess what was the response to that scenario? "The service definition in the WSDL is wrong, please refer to the documentation in order to use the methods and parameters correctly" - No comment! Lorna's title is a quick read and in some areas she has good advice on designing and implementing Web Services and APIs. But roughly 100 pages aren't enough to cover a vast topic like that. After all, nice try and I'm looking forward to an improved second edition. Honestly, I never thought that I would come across a poor review. In general, it's a good book but it clearly has a lack of depth, the PHP code samples are incomplete (closing tags missing), and there are too many assumptions and theoretical statements.

    Read the article

  • [GEEK SCHOOL] Network Security 2: Preventing Disaster with User Account Control

    - by Ciprian Rusen
    In this second lesson in our How-To Geek School about securing the Windows devices in your network, we will talk about User Account Control (UAC). Users encounter this feature each time they need to install desktop applications in Windows, when some applications need administrator permissions in order to work and when they have to change different system settings and files. UAC was introduced in Windows Vista as part of Microsoft’s “Trustworthy Computing” initiative. Basically, UAC is meant to act as a wedge between you and installing applications or making system changes. When you attempt to do either of these actions, UAC will pop up and interrupt you. You may either have to confirm you know what you’re doing, or even enter an administrator password if you don’t have those rights. Some users find UAC annoying and choose to disable it but this very important security feature of Windows (and we strongly caution against doing that). That’s why in this lesson, we will carefully explain what UAC is and everything it does. As you will see, this feature has an important role in keeping Windows safe from all kinds of security problems. In this lesson you will learn which activities may trigger a UAC prompt asking for permissions and how UAC can be set so that it strikes the best balance between usability and security. You will also learn what kind of information you can find in each UAC prompt. Last but not least, you will learn why you should never turn off this feature of Windows. By the time we’re done today, we think you will have a newly found appreciation for UAC, and will be able to find a happy medium between turning it off completely and letting it annoy you to distraction. What is UAC and How Does it Work? UAC or User Account Control is a security feature that helps prevent unauthorized system changes to your Windows computer or device. These changes can be made by users, applications, and sadly, malware (which is the biggest reason why UAC exists in the first place). When an important system change is initiated, Windows displays a UAC prompt asking for your permission to make the change. If you don’t give your approval, the change is not made. In Windows, you will encounter UAC prompts mostly when working with desktop applications that require administrative permissions. For example, in order to install an application, the installer (generally a setup.exe file) asks Windows for administrative permissions. UAC initiates an elevation prompt like the one shown earlier asking you whether it is okay to elevate permissions or not. If you say “Yes”, the installer starts as administrator and it is able to make the necessary system changes in order to install the application correctly. When the installer is closed, its administrator privileges are gone. If you run it again, the UAC prompt is shown again because your previous approval is not remembered. If you say “No”, the installer is not allowed to run and no system changes are made. If a system change is initiated from a user account that is not an administrator, e.g. the Guest account, the UAC prompt will also ask for the administrator password in order to give the necessary permissions. Without this password, the change won’t be made. Which Activities Trigger a UAC Prompt? There are many types of activities that may trigger a UAC prompt: Running a desktop application as an administrator Making changes to settings and files in the Windows and Program Files folders Installing or removing drivers and desktop applications Installing ActiveX controls Changing settings to Windows features like the Windows Firewall, UAC, Windows Update, Windows Defender, and others Adding, modifying, or removing user accounts Configuring Parental Controls in Windows 7 or Family Safety in Windows 8.x Running the Task Scheduler Restoring backed-up system files Viewing or changing the folders and files of another user account Changing the system date and time You will encounter UAC prompts during some or all of these activities, depending on how UAC is set on your Windows device. If this security feature is turned off, any user account or desktop application can make any of these changes without a prompt asking for permissions. In this scenario, the different forms of malware existing on the Internet will also have a higher chance of infecting and taking control of your system. In Windows 8.x operating systems you will never see a UAC prompt when working with apps from the Windows Store. That’s because these apps, by design, are not allowed to modify any system settings or files. You will encounter UAC prompts only when working with desktop programs. What You Can Learn from a UAC Prompt? When you see a UAC prompt on the screen, take time to read the information displayed so that you get a better understanding of what is going on. Each prompt first tells you the name of the program that wants to make system changes to your device, then you can see the verified publisher of that program. Dodgy software tends not to display this information and instead of a real company name, you will see an entry that says “Unknown”. If you have downloaded that program from a less than trustworthy source, then it might be better to select “No” in the UAC prompt. The prompt also shares the origin of the file that’s trying to make these changes. In most cases the file origin is “Hard drive on this computer”. You can learn more by pressing “Show details”. You will see an additional entry named “Program location” where you can see the physical location on your hard drive, for the file that’s trying to perform system changes. Make your choice based on the trust you have in the program you are trying to run and its publisher. If a less-known file from a suspicious location is requesting a UAC prompt, then you should seriously consider pressing “No”. What’s Different About Each UAC Level? Windows 7 and Windows 8.x have four UAC levels: Always notify – when this level is used, you are notified before desktop applications make changes that require administrator permissions or before you or another user account changes Windows settings like the ones mentioned earlier. When the UAC prompt is shown, the desktop is dimmed and you must choose “Yes” or “No” before you can do anything else. This is the most secure and also the most annoying way to set UAC because it triggers the most UAC prompts. Notify me only when programs/apps try to make changes to my computer (default) – Windows uses this as the default for UAC. When this level is used, you are notified before desktop applications make changes that require administrator permissions. If you are making system changes, UAC doesn’t show any prompts and it automatically gives you the necessary permissions for making the changes you desire. When a UAC prompt is shown, the desktop is dimmed and you must choose “Yes” or “No” before you can do anything else. This level is slightly less secure than the previous one because malicious programs can be created for simulating the keystrokes or mouse moves of a user and change system settings for you. If you have a good security solution in place, this scenario should never occur. Notify me only when programs/apps try to make changes to my computer (do not dim my desktop) – this level is different from the previous in in the fact that, when the UAC prompt is shown, the desktop is not dimmed. This decreases the security of your system because different kinds of desktop applications (including malware) might be able to interfere with the UAC prompt and approve changes that you might not want to be performed. Never notify – this level is the equivalent of turning off UAC. When using it, you have no protection against unauthorized system changes. Any desktop application and any user account can make system changes without your permission. How to Configure UAC If you would like to change the UAC level used by Windows, open the Control Panel, then go to “System and Security” and select “Action Center”. On the column on the left you will see an entry that says “Change User Account Control settings”. The “User Account Control Settings” window is now opened. Change the position of the UAC slider to the level you want applied then press “OK”. Depending on how UAC was initially set, you may receive a UAC prompt requiring you to confirm this change. Why You Should Never Turn Off UAC If you want to keep the security of your system at decent levels, you should never turn off UAC. When you disable it, everything and everyone can make system changes without your consent. This makes it easier for all kinds of malware to infect and take control of your system. It doesn’t matter whether you have a security suite or antivirus installed or third-party antivirus, basic common-sense measures like having UAC turned on make a big difference in keeping your devices safe from harm. We have noticed that some users disable UAC prior to setting up their Windows devices and installing third-party software on them. They keep it disabled while installing all the software they will use and enable it when done installing everything, so that they don’t have to deal with so many UAC prompts. Unfortunately this causes problems with some desktop applications. They may fail to work after you enable UAC. This happens because, when UAC is disabled, the virtualization techniques UAC uses for your applications are inactive. This means that certain user settings and files are installed in a different place and when you turn on UAC, applications stop working because they should be placed elsewhere. Therefore, whatever you do, do not turn off UAC completely! Coming up next … In the next lesson you will learn about Windows Defender, what this tool can do in Windows 7 and Windows 8.x, what’s different about it in these operating systems and how it can be used to increase the security of your system.

    Read the article

  • SQL SERVER – Expanding Views – Contest Win Joes 2 Pros Combo (USD 198) – Day 4 of 5

    - by pinaldave
    August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Which of the following key word will force the query to use indexes created on views? a) ENCRYPTION b) SCHEMABINDING c) NOEXPAND d) CHECK OPTION Query Hints: BIG HINT POST Usually, the assumption is that Index on the table will use Index on the table and Index on view will be used by view. However, that is the misconception. It does not happen this way. In fact, if you notice the image, you will find the both of them (table and view) use both the index created on the table. The index created on the view is not used. The reason for the same as listed in BOL. The cost of using the indexed view may exceed the cost of getting the data from the base tables, or the query is so simple that a query against the base tables is fast and easy to find. This often happens when the indexed view is defined on small tables. You can use the NOEXPAND hint if you want to force the query processor to use the indexed view. This may require you to rewrite your query if you don’t initially reference the view explicitly. You can get the actual cost of the query with NOEXPAND and compare it to the actual cost of the query plan that doesn’t reference the view. If they are close, this may give you the confidence that the decision of whether or not to use the indexed view doesn’t matter. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 4. SQL Joes 2 Pros Development Series – Structured Error Handling SQL Joes 2 Pros Development Series – SQL Server Error Messages SQL Joes 2 Pros Development Series – Table-Valued Functions SQL Joes 2 Pros Development Series – Table-Valued Store Procedure Parameters SQL Joes 2 Pros Development Series – Easy Introduction to CHECK Options SQL Joes 2 Pros Development Series – Introduction to Views SQL Joes 2 Pros Development Series – All about SQL Constraints Next Step: Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • System.Threading.ThreadAbortException executing WCF service

    - by SURESH GIRIRAJAN
    In one of our prod server we recently ran into issue when we went and update the web.config and try to browse the service. We started seeing the service was not responding and getting the following warning in the application log. Our service is WCF service, BizTalk orchestration exposed as service. We have other prod server where we never ran into this issue, so what’s different with this server. After going thru lot of forum and came up on some Microsoft service pack and hot fix which related to FCN. But I don’t want to apply any patch on this server then we need to do on all the other servers too. So solution is simple, I dropped the existing website, created a new site with different name with updated web.config browse the service. Then dropped that site and recreate the original web site and it worked fine without any issue. Event Viewer:  Event Type:        Warning Event Source:    ASP.NET 2.0.50727.0 Event Category:                Web Event Event ID:              1309 Date:                     6/6/2011 Time:                    5:41:42 PM User:                     N/A Computer:          PRODP02 Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 6/6/2011 5:41:42 PM Event time (UTC): 6/6/2011 9:41:42 PM Event ID: a71769f42b304355a58c482bfec267f2 Event sequence: 3 Event occurrence: 1 Event detail code: 0  Application information:     Application domain: /LM/W3SVC/518296899/ROOT/PortArrivals-2-129518698821558995     Trust level: Full     Application Virtual Path: /TESTSVC     Application Path: D:\inetpub\wwwroot\RFID\TESTSVC\     Machine name: PRODP02  Process information:     Process ID: 8752     Process name: w3wp.exe     Account name: domain\BizTalk_Svc_Hostlso  Exception information:     Exception type: ThreadAbortException     Exception message: Thread was being aborted.  Request information:     Request URL: http://localhost:81/TESTSVC/TESTSVCS.svc     Request path: /TESTSVC/TESTSVCS.svc     User host address: 127.0.0.1     User:      Is authenticated: False     Authentication Type:      Thread account name: domain\BizTalk_Svc_Hostlso  Thread information:     Thread ID: 22     Thread account name: domain\BizTalk_Svc_Hostlso     Is impersonating: False     Stack trace:    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)  at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)    at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)  <Description>Handling an exception.</Description> <AppDomain>/LM/W3SVC/518296899/ROOT/TESTSVC-6-129518741899334691</AppDomain> <Exception> <ExceptionType>System.Threading.ThreadAbortException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>Thread was being aborted.</Message> <StackTrace> at System.Threading.Monitor.Enter(Object obj) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) </StackTrace> <ExceptionString>System.Threading.ThreadAbortException: Thread was being aborted.    at System.Threading.Monitor.Enter(Object obj)    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)    at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)    at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)</ExceptionString>

    Read the article

  • Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

    - by Daniel Adarve
    I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

    Read the article

  • IIS Logfile Visualization with XNA

    - by BobPalmer
    In my office, I have a wall mounted monitor who's whole purpose in life is to display perfmon stats from our various servers.  And on a fairly regular basis, I have folks walk by asking what the lines mean.    After providing the requisite explaination about CPU utilization, disk I/O bottlenecks, etc. this is usually followed by some blank stares from the user in question, and a distillation of all of our engineering wizardry down to the phrase 'So when the red line goes up that's bad then?'   This of course would not do.  So I talked to my friends and our network admin about an option to show something more eye catching and visual, with which we could catch at a glance a feel for what was up with our site.    He initially pointed me out to a video showing GLTail and Chipmunk done in Ruby.  Realizing this was both awesome, and that I needed an excuse to do something in XNA, I decided to knock out a proof of concept for something very similar, but with a few tweaks.   Here's a link to a video of the current prototype:   http://www.youtube.com/watch?v=jM_PWZbtH2I   Essentially this app opens up a log file (even an active one) and begins pulling out the lines of text.  (Here's a good Code Project link that covers how to do tail reading from an active text file: http://www.codeproject.com/KB/files/tail.aspx).   As new data is added, a bubble is generated in the application - a GET statement comes from the left, and a POST from the right.  I then run it through a series of expression checkers, and based on the kind of statement and the pattern, a bubble of an appropriate color is generated.   For example, if I get a 500, a huge red bubble pops out.  Others are based on the part of the system the page is from - i.e. green bubbles are from our claims management subsystem, and blue bubbles are from the pages our scheduling staff use to schedule patients.  Others include the purple bubbles for security and login, and yellow bubbles for some miscellaneous pages.   The little grey bubbles represent things like images, JS, CSS, etc - and their small size makes them work like grease to keep the larger page bubbles moving.   The app is also smart enough that if it is starting to bog down with handling the physics and interactions, it will suspend new bubbles until enough have dropped off that performance can resume (you can see this slight stuttering in the sample video).   The net result is that anyone will be able to look up on the wall monitor, and instantly get a quick feel for how things are going on the floor.  Website slow?  You can get a feel for both volume and utilized modules with one glance.  Website crashing?  Look for a wall of giant red bubbles.  No activity at all?  Maybe the site is down.  Now couple this with utilization within a farm, and cross referenced with a second app showing the same kind of data from your SQL database...   As for the app itself, it's a windows XNA project with the code in C#.   The physics are handled by the Farseer physicis eingine for XNA (http://www.codeplex.com/FarseerPhysics) which is just pure goodness.  The samples are great, and I had the app up and working in two evenings (half of that was fine tuning, and the other was me coding with a kid in my lap).   My next steps include wiring this to SQL (I have some ideas...), and adding a nice configuration module.  For example, you could use polygons, etc to tie to your regex - or more entertaining things like having a little human ragdoll to represent a user login.     Once that's wrapped up and I have a chance to complete some hardening, I will be releasing the whole thing into the wild as opensource.     Feel free to ping me if you have any questions! -Bob

    Read the article

  • Cutting Edge versus Just Average? Your SOA, Got BPM? by Mala Ramakrishnan

    - by JuergenKress
    Service Oriented Architecture (SOA) has completely transformed IT from the time it was introduced well over a decade ago. Organizations have been re-plumbing their infrastructure for reusability, efficiency and gain and succeeding with it. Best practices have emerged and people and technology have matured. We have got better at delivering on a stable platform on mission critical applications and services. Yet, there is this one secret that sets some SOA customers apart from the others. These companies grow and revolutionize their business and not just transform their IT infrastructure. The differences seem subtle for an untrained eye examining these organizations externally. And from within the company, it’s a bit like an ant sitting on an elephant, hard to differentiate between the IT trunk and business tail. What is it that some organizations do differently that makes them succeed beyond SOA? These organizations pull in business people more and more to weigh into their IT decisions. They wrench understanding process over services. They don’t settle easily when bridging business metrics and IT performance. They anguish over business requirements not translating seamlessly and quickly into IT. IT is not just an enabler but a pillar that revolutionizes their business. Okay, I’ll give it to you. These organizations layer Business Process Management (BPM) on top of their SOA. Think about lifeblood business processes in your own organizations. If you are Fedex, this would be shipping and handling. If you are Stanford Hospital, this would be patient case-management: from on-boarding through discharge and follow-up care. If you are Wells Fargo, this would be loan origination. Now think about how your SOA ties into your business process. Can you decouple your business processes from your SOA so that the two can transform and change independent of each other? Can you forecast success metrics for your business process, make the changes across the board and then look back over different periods of time to see if you are on track? Are your critical business processes entrenched in the minds of few experts in your organization or does everyone from the receptionist to your enterprise architect to your CEO understand what they can do to revolutionize it? Business Process Management is a superset of SOA. It is the process of getting your business to articulate business value and metrics and have it implemented in IT without any loss in translation. It is the act of extracting the business process from the minds of experts and IT applications in your organization and valuing them as assets for performance and gain. BPM is stepping outside your SOA and moving your organization to the next level of innovation. Oracle is accelerating BPM across industries with the latest launch. Join us to understand how BPM can give your organization a cutting edge over your SOA. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA,BPM,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • How to future-proof my touch-enabled web application?

    - by Rice Flour Cookies
    I recently went out and purchased a touch-screen monitor with the intention of learning how to program touch-enabled web applications. I had reviewed the MDN documentation about touch events, as well as the W3C specification. To get started, I wrote a very short test page with two event handlers: one for the mousedown event and one for the touchstart event. I fired up the web page in IE and touched the document and found that only the mousedown event fired. I saw the same behavior with Firefox, only to find out later that Firefox can be set to enable the touchstart event using about:config. When touch events are enabled, the touchstart event fires, but not mousedown. Chrome was even stranger: it fired both events when I touched the document: touchstart and mousedown, in that order. Only on my Android phone does it appear to be the case that only the touchstart event fires when I touch the document. I did a a Google search and ended up on two interesting pages. First, I found the page on CanIUse for touch events: http://caniuse.com/#feat=touch Can I Use clearly indicates that IE does not support touch events as of this writing, and Firefox only supports touch events if they are manually enabled. Furthermore, all four browsers I mentioned treat the touch in a completely different way. It boils down to this: IE: simulated mouse click Firefox with touch disabled: simulated mouse click Firefox with touch enabled: touch event Chrome: touch event and simulated mouse click Android: touch event What is more frustrating is that Google also found a Microsoft page called RethinkIE. RethinkIE brags about touch support in IE; as a matter of fact, one of their slogans is "Touch the Web". It links to a number of touch-based application. I followed some of these links, and as best I can tell, it's just like CanIUse described; no proper touch support; just simulated mouse clicks. The MDN (https://developer.mozilla.org/en-US/docs/Web/API/Touch) and W3C (http://www.w3.org/TR/touch-events/) documentation describe a far richer interface; an interface that doesn't just simulate mouse clicks, but keeps track of multiple touches at once, the contact area, rotation, and force of each touch, and unique identifiers for each touch so that they can be tracked individually. I don't see how simulated mouse clicks can ever touch the above described functionality, which, once again, is part of the W3C specification, although it is listed as "non-normative", meaning that a browser can claim to be standards-compliant without implementing it. (Why bother making it part of the standard, then?) What motivated my research is that I've written an HTML5 application that doesn't work on Android because Android doesn't fire mouse events. I'm now afraid to try to implement touch for my application because the browsers all behave so differently. I imagine that at some time in the future, the browsers might start handling touch similarly, but how can I tell how they might be handled in the future short of writing code to handle the behavior of each individual browser? Is it possible to write code today that will work with touch-enabled browsers for years to come? If so, how?

    Read the article

  • Silverlight Cream for December 27, 2010 -- #1016

    - by Dave Campbell
    In this Issue: Sacha Barber, David Anson, Jesse Liberty, Shawn Wildermuth, Jeff Blankenburg(-2-), Martin Krüger, Ryan Alford(-2-), Michael Crump, Peter Kuhn(-2-). Above the Fold: Silverlight: "Part 4 of 4 : Tips/Tricks for Silverlight Developers" Michael Crump WP7: "Navigating with the WebBrowser Control on WP7" Shawn Wildermuth Shoutouts: John Papa posted that the open call is up for MIX11 presenters: Your Chance to Speak at MIX11 From SilverlightCream.com: Aspect Examples (INotifyPropertyChanged via aspects) If you're wanting to read a really in-depth discussion of aspect oriented programming (AOP), check out the article Sacha Barber has up at CodeProject discussing INPC via aspects. How to: Localize a Windows Phone 7 application that uses the Windows Phone Toolkit into different languages David Anson has a nice tutorial up on localizing your WP7 app, including using the Toolkit and controls such as DatePicker... remember we're talking localized Windows Phone From Scratch – Animation Part 1 Jesse Liberty continues in his 'From Scratch' series with this first post on WP7 Animation... good stuff, Jesse! Navigating with the WebBrowser Control on WP7 In building his latest WP7 app, Shawn Wildermuth ran into some obscure errors surrounding browser.InvokeScript. He lists the simple solution and his back, refresh, and forward button functionality for us. What I Learned In WP7 – Issue #7 In the time I was out, Jeff Blankenburg got ahead of me, so I'll catch up 2 at a time... in this number 7 he discusses making videos of your apps, links to the Learn Visual Studio series, and his new website What I Learned In WP7 – Issue #8 Jeff Blankenburg's number 8 is a very cool tip on using the return key on the keyboard to handle the loss of focus and handling of text typed into a textbox. Resize of a grid by using thumb controls Martin Krüger has a sample in the Expression Gallery of a grid that is resizable by using 'thumb controls' at the 4 corners... all source, so check it out! Silverlight 4 – Productivity Power Tools and EF4 Ryan Alford found a very interesting bug associated with EF4 and the Productivity Power Tools, and the way to get out of it is just weird as well. Silverlight 4 – Toolkit and Theming Ryan Alford also had a problem adding a theme from the Toolkit, and what all you might have to do to get around this one.... Part 4 of 4 : Tips/Tricks for Silverlight Developers. Michael Crump has part 4 of his series on Silverlight Development tips and tricks. This is numbers 16 through 20 and covers topics such as Version information, Using Lambdas, Specifying a development port, Disabling ChildWindow Close button, and XAML cleanup. The XML content importer and Windows Phone 7 Peter Kuhn wanted to use the XML content inporter with a WP7 app and ran into problems implementing the process and a lack of documentation as well... he pounded through it all and has a class he's sharing for loading sounds via XML file settings. WP7 snippet: analyzing the hyperlink button style In a second post, Peter Kuhn responds to a forum discussion about the styles for the hyperlink button in WP7 and why they're different than SL4 ... and styles-to-go to get all the hyperlink goodness you want... wrapped text, or even non-text content. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Visual Studio Exceptions dialogs

    - by Daniel Moth
    Previously I covered step 1 of live debugging with start and attach. Once the debugger is attached, you want to go to step 2 of live debugging, which is to break. One way to break under the debugger is to do nothing, and just wait for an exception to occur in your code. This is true for all types of code that you debug in Visual Studio, and let's consider the following piece of C# code:3: static void Main() 4: { 5: try 6: { 7: int i = 0; 8: int r = 5 / i; 9: } 10: catch (System.DivideByZeroException) {/*gulp. sue me.*/} 11: System.Console.ReadLine(); 12: } If you run this under the debugger do you expect an exception on line 8? It is a trick question: you have to know whether I have configured the debugger to break when exceptions are thrown (first-chance exceptions) or only when they are unhandled. The place you do that is in the Exceptions dialog which is accessible from the Debug->Exceptions menu and on my installation looks like this: Note that I have checked all CLR exceptions. I could have expanded (like shown for the C++ case in my screenshot) and selected specific exceptions. To read more about this dialog, please read the corresponding Exception Handling debugging msdn topic and all its subtopics. So, for the code above, the debugger will break execution due to the thrown exception (exactly as if the try..catch was not there), so I see the following Exception Thrown dialog: Note the following: I can hit continue (or hit break and then later continue) and the program will continue fine since I have a catch handler. If this was an unhandled exception, then that is what the dialog would say (instead of first chance exception) and continuing would crash the app. That hyperlinked text ("Open Exception Settings") opens the Exceptions dialog I described further up. The coolest thing to note is the checkbox - this is new in this latest release of Visual Studio: it is a shortcut to the checkbox in the Exceptions dialog, so you don't have to open it to change this setting for this specific exception - you can toggle that option right from this dialog. Finally, if you try the code above on your system, you may observe a couple of differences from my screenshots. The first is that you may have an additional column of checkboxes in the Exceptions dialog. The second is that the last dialog I shared may look different to you. It all depends on the Debug->Options settings, and the two relevant settings are in this screenshot: The Exception assistant is what configures the look of the UI when the debugger wants to indicate exception to you, and the Just My Code setting controls the extra column in the Exception dialog. You can read more about those options on MSDN: How to break on User-Unhandled exceptions (plus Gregg’s post) and Exception Assistant. Before I leave you to go play with this stuff a bit more, please note that this level of debugging is now available for JavaScript too, and if you are looking at the Exceptions dialog and wondering what the "GPU Memory Access Exceptions" node is about, stay tuned on the C++ AMP blog ;-) Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >