Search Results

Search found 12007 results on 481 pages for 'usb speed'.

Page 162/481 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• SD-CARD reader does not show in ubuntu

  - by shantanu

  I bought Acer asipre 4250. It have built-in SD card reader. But it is not working. Nothing show in /media or fdisk but something in dmesg. dmesg: new high-speed USB device number 3 using ehci_hcd [ 127.396733] scsi5 : usb-storage 2-2:1.0 [ 128.526562] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 128.532512] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 129.008110] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 129.032083] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 129.056411] ohci_hcd 0000:00:16.0: PCI INT A disabled [ 129.338026] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 129.808328] ohci_hcd 0000:00:14.5: PCI INT C disabled [ 167.728616] usb 2-2: USB disconnect, device number 3 [ 169.872284] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 169.872340] ehci_hcd 0000:00:13.2: PME# enabled fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0006bc6d Device Boot Start End Blocks Id System /dev/sda1 * 2048 48828415 24413184 7 HPFS/NTFS/exFAT /dev/sda2 48828416 50829311 1000448 82 Linux swap / Solaris /dev/sda3 50829312 99657727 24414208 83 Linux /dev/sda4 99659774 625141759 262740993 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 99659776 275439615 87889920 7 HPFS/NTFS/exFAT /dev/sda6 275441664 451221503 87889920 7 HPFS/NTFS/exFAT /dev/sda7 451223552 625141759 86959104 7 HPFS/NTFS/exFAT I found another problem just right now. I format last three drives as EXT4 with disk utility. But they are showing as NTFS/exFAT in fdisk. :-(

  Read the article

• Move model forward base on model orientation

  - by ChocoMan

  My model rotates on it's own Y-axis regardless of where it is in the world. Here are the controls for the left ThumbStick: UP (move model forward on Z-Axis) DOWN (move model backward on Z-Axis) LEFT & RIGHT (strafe to either side) The problem is adjusting the direction the model's orientation UP and DOWN if the player should also rotate the player while moving forward or backwards. An example what Im trying to achieve would be a car doing donuts. The car is always facing the current direction that it interprets as forward (or rear as backwards) in relation to it's local rotation. Here is how Im calling the movement: // Rotate model with Right Thumbstick along X-Axis modelRotation -= pController.ThumbSticks.Right.X * mRotSpeed; // Move Forward if (pController.IsButtonDown(Buttons.LeftThumbstickUp)) { modelPosition.Z -= -pController.ThumbSticks.Left.Y * speed; } // Move Backward if (pController.IsButtonDown(Buttons.LeftThumbstickDown)) { modelPosition.Z += pController.ThumbSticks.Left.Y * speed; } // Strafe Left if (pController.IsButtonDown(Buttons.LeftThumbstickLeft)) { modelPosition.X += -pController.ThumbSticks.Left.X * speed; } // Strafe Right if (pController.IsButtonDown(Buttons.LeftThumbstickRight)) { modelPosition.X -= pController.ThumbSticks.Left.X * speed; } // DeadZone if (!pController.IsButtonDown(Buttons.LeftThumbstickUp) && !pController.IsButtonDown(Buttons.LeftThumbstickDown) && !pController.IsButtonDown(Buttons.LeftThumbstickLeft) && !pController.IsButtonDown(Buttons.LeftThumbstickRight)) { }

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

  - by Matt

  i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

  Read the article

• Code Behaviour via Unit Tests

  - by Dewald Galjaard

  Normal 0 false false false EN-ZA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Some four months ago my car started acting up. Symptoms included a sputtering as my car’s computer switched between gears intermittently. Imagine building up speed, then when you reach 80km/h the car magically and mysteriously decide to switch back to third or even second gear. Clearly it was confused! I managed to track down a technician, an expert in his field to help me out. As he fitted his handheld computer to some hidden port under the dash, he started to explain “These cars are quite intelligent, you know. When they sense something is wrong they run in a restrictive program which probably account for how you managed to drive here in the first place...”  I was surprised and thought this was certainly going to be an interesting test drive. The car ran smoothly down the first couple of stretches as the technician ran through routine checks. Then he said “Ok, all looking good. We need to start testing aspects of the gearbox. Inside the gearbox there are a couple of sensors. One of them is a speed sensor which talks to the computer, which in turn will decide which gear to switch to. The restrictive program avoid these sensors altogether and allow the computer to obtain its input from other [non-affected] sources”. Then, as soon as he forced the speed sensor to come back online the symptoms and ill behaviour re-emerged... What an incredible analogy for getting into a discussion on unit testing software? Besides I should probably put my ill fortune to some good use, right? This example provide a lot of insight into how and why we should conduct unit tests when writing code. More importantly, it captures what is easily and unfortunately often the most overlooked goal of writing unit tests by those new to the art and those who oppose it alike - The goal of writing unit tests is to test the behaviour of our code under predefined conditions. Although it is very possible to test the intrinsic workings of each and every component in your code, writing several tests for each method in practise will soon prove to be an exhausting and ultimately fruitless exercise given the certain and ever changing nature of business requirements. Consequently it is true and quite possible whilst conducting proper unit tests, to call any single method several times as you examine and contemplate different scenarios. Let’s write some code to demonstrate what I mean. In my example I make use of the Moq framework and NUnit to create my tests. Truly you can use whatever you’re comfortable with. First we’ll create an ISpeedSensor interface. This is to represent the speed sensor located in the gearbox.  Then we’ll create a Gearbox class which we’ll pass to a constructor when we instantiate an object of type Computer. All three are described below.   ISpeedSensor.cs namespace AutomaticVehicle {     public interface ISpeedSensor     {         int ReportCurrentSpeed();     } }   Gearbox.cs namespace AutomaticVehicle {      public class Gearbox     {         private ISpeedSensor _speedSensor;           public Gearbox( ISpeedSensor gearboxSpeedSensor )         {             _speedSensor = gearboxSpeedSensor;         }         /// <summary>         /// This method obtain it's reading from the speed sensor.         /// </summary>         /// <returns></returns>         public int ReportCurrentSpeed()         {             return _speedSensor.ReportCurrentSpeed();         }     } } Computer.cs namespace AutomaticVehicle {     public class Computer     {         private Gearbox _gearbox;         public Computer( Gearbox gearbox )         {                     }          public int GetCurrentSpeed()         {             return _gearbox.ReportCurrentSpeed( );         }     } } Since this post is about Unit testing, that is exactly what we’ll create next. Create a second project in your solution. I called mine AutomaticVehicleTests and I immediately referenced the respective nunit, moq and AutomaticVehicle dll’s. We’re going to write a test to examine what happens inside the Computer class. ComputerTests.cs namespace AutomaticVehicleTests {     [TestFixture]     public class ComputerTests     {         [Test]         public void Computer_Gearbox_SpeedSensor_DoesThrow()         {             // Mock ISpeedSensor in gearbox             Mock< ISpeedSensor > speedSensor = new Mock< ISpeedSensor >( );             speedSensor.Setup( n => n.ReportCurrentSpeed() ).Throws<Exception>();             Gearbox gearbox = new Gearbox( speedSensor.Object );               // Create Computer instance to test it's behaviour  towards an exception in gearbox             Computer carComputer = new Computer( gearbox );             // For simplicity let’s assume for now the car only travels at 60 km/h.             Assert.AreEqual( 60, carComputer.GetCurrentSpeed( ) );          }     } }   What is happening in this test? We have created a mocked object using the ISpeedsensor interface which we've passed to our Gearbox object. Notice that I created the mocked object using an interface, not the implementation. I’ll talk more about this in future posts but in short I do this to accentuate the fact that I'm not not really concerned with how SpeedSensor work internally at this particular point in time. Next I’ve gone ahead and created a scenario where I’ve declared the speed sensor in Gearbox to be faulty by forcing it to throw an exception should we ask Gearbox to report on its current speed. Sneaky, sneaky. This test is a simulation of how things may behave in the real world. Inevitability things break, whether it’s caused by mechanical failure, some logical error on your part or a fellow developer which didn’t consult the documentation (or the lack thereof ) - whether you’re calling a speed sensor, making a call to a database, calling a web service or just trying to write a file to disk. It’s a scenario I’ve created and this test is about how the code within the Computer instance will behave towards any such error as I’ve depicted. Now, if you’ve followed closely in my final assert method you would have noticed I did something quite unexpected. I might be getting ahead of myself now but I’m testing to see if the value returned is equal to what I expect it to be under perfect conditions – I’m not testing to see if an error has been thrown! Why is that? Well, in short this is TDD. Test Driven Development is about first writing your test to define the result we want, then to go back and change the implementation within your class to obtain the desired output (I need to make sure I can drive back to the repair shop. Remember? ) So let’s go ahead and run our test as is. It’s fails miserably... Good! Let’s go back to our Computer class and make a small change to the GetCurrentSpeed method.   Computer.cs public int GetCurrentSpeed() {   try   {     return _gearbox.ReportCurrentSpeed( );   }   catch   {     RunRestrictiveProgram( );   } }     This is a simple solution, I know, but it does provide a way to allow for different behaviour. You’re more than welcome to provide an implementation for RunRestrictiveProgram should you feel the need to. It's not within the scope of this post or related to the point I'm trying to make. What is important is to notice how the focus has shifted in our approach from how things can break - to how things behave when broken.   Happy coding!

  Read the article

• Prevent oversteering catastrophe in racing games

  - by jdm

  When playing GTA III on Android I noticed something that has been annoying me in almost every racing game I've played (maybe except Mario Kart): Driving straight ahead is easy, but curves are really hard. When I switch lanes or pass somebody, the car starts swiveling back and forth, and any attempt to correct it makes it only worse. The only thing I can do is to hit the brakes. I think this is some kind of oversteering. What makes it so irritating is that it never happens to me in real life (thank god :-)), so 90% of the games with vehicles inside feel unreal to me (despite probably having really good physics engines). I've talked to a couple of people about this, and it seems either you 'get' racing games, or you don't. With a lot of practice, I did manage to get semi-good at some games (e.g. from the Need for Speed series), by driving very cautiously, braking a lot (and usually getting a cramp in my fingers). What can you do as a game developer to prevent the oversteering resonance catastrophe, and make driving feel right? (For a casual racing game, that doesn't strive for 100% realistic physics) I also wonder what games like Super Mario Kart exactly do differently so that they don't have so much oversteering? I guess one problem is that if you play with a keyboard or a touchscreen (but not wheels and pedals), you only have digital input: gas pressed or not, steering left/right or not, and it's much harder to steer appropriately for a given speed. The other thing is that you probably don't have a good sense of speed, and drive much faster than you would (safely) in reality. From the top of my head, one solution might be to vary the steering response with speed.

  Read the article

• Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

  - by Najdmie

  I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

  Read the article

• How do I install Ubuntu 13.10 from a partition on my Mac?

  - by Barry

  I am trying to install Ubuntu 13.10 on my Macbook Air. I've previously had no issue installing from a USB stick to this machine. However, I don't currently have access to a USB stick or any external media at all! What I've done so far is partitioned my SSD into 3 partitions. One holds OS X, another is a 5gb partition intended for the install ISO, and a third is intended to be the target for that install. The second two partitions are formatted as FAT. I've used dd (with and without bs=1m) to "burn" my ISO to the small 5gb FAT partition. I also at one point tried using hdituil to convert my ISO file to IMG and went through the same process with same result below. After "burning" my ISO to the small partition, I reboot into Refind. Refind sees my small 5gb partition perfectly well, and when I select that partition it loads GRUB appropriately. However, from here, regardless of what I choose, Ubuntu will start to load and then after a few minutes crash out to: BuzyBox V1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built in commands. (initramfs) unable to find a medium containing a live file system. I've Googled this error and found a number of people encountering it when trying to install from USB, but no solutions seem applicable to my case (installing from a partition on my SSD, to another partition on my SSD). Is there any solution to this, or do I just need to wait a few days until I have access to a USB stick? Many thanks in advance, and apologies for length -- I figured I'd err on the side of being exhaustive rather than having people suggest things I've already tried.

  Read the article

• Player sprite moving slower on iPhone 4

  - by nvillec

  I just finished getting movement/jump animation for a player sprite in Xcode using Cocos2D. The basic movement algorithm is a timer that updates every 0.01 sec, changing the sprite position to (sprite.position.x + xVel, sprite.position.y + yVel). Each time a movement button is tapped, the appropriate velocity (initialized to 0) is changed to whatever speed I choose, then a stop movement button returns the velocity to 0. It's not an ideal solution but I'm very new at this and stoked to at least have that working with little help from the internet. So I may not have explained that perfectly, but it is in fact working to my satisfaction in Xcode's iPhone Simulator, however when I build it for my device and run it on my phone, the sprite's movement speed is noticeably slower than in Xcode. At first I thought it must have to do with the resolution of the iPhone 4, making the sprite's movement path twice as long, but I found that if I pull up the multitask bar, then return to the app the speed will sometimes jump back to normal. My second theory was that the code is just inefficient and is bogging the processes down, but I would see this reflected in the frame rate wouldn't I? It stays at 59-60 the whole time, and the spritesheet animation runs at the correct speed. Has anyone experienced this? Is this a really obvious issue that I'm completely missing? Any help (or tips for optimizing my approach to movement) would be much appreciated!

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• Vector vs Scalar velocity?

  - by Serguei Fedorov

  I am revamping an engine I have been working on and off on for the last few weeks to use a directional vector to dictate direction; this way I can dictate the displacement based on a direction. However, the issue I am trying to overcome is the following problem; the speed towards X and speed towards Y are unrelated to one another. If gravity pulls the object down by an increasing velocity my velocity towards the X should not change. This is very easy to implement if my speed is broken into a Vector datatype, Vector.X dictates one direction Vector.Y dictates the other (assuming we are not concerned about the Z axis). However, this defeats the purpose of the directional vector because: SpeedX = 10 SpeedY = 15 [1, 1] normalized = ~[0.7, 0.7] [0.7, 0.7] * [10, 15] = [7, 10.5] As you can see my direction is now "scaled" to my speed which is no longer the direction that I want to be moving in. I am very new to vector math and this is a learning project for me. I looked around a little bit on the internet but I still want to figure out things on my own (not just look at an example and copy off it). Is there way around this? Using a directional vector is extremely useful but I am a little bit stumped at this problem. I am sorry if my mathematical understanding maybe completely wrong.

  Read the article

• Raspberry Pi, Time Capsule Progress

  - by Richard Jones

  So by way of an update. I thought all was good with my Raspberry Pi, Debian and Netatalk Apple Time Capsule Clone. However something very strange going on. Although I could backup my Mac's + PC's fine to Raspberry Pi with external USB HD; strangely with RPI running, I couldn't use AirPlay. I found myself unable to play anything from Mac to Apple TV. So after lots of trying to make this work, I about turned and finally went out and got myself a 2TB Apple Time Capsule. More cash than I would want to spend on anything like this, but Apple you got me. I would like to offer a top tip, which maybe goes a small way to justifying silly expenditure... You can easily add a USB HD to any Time Capsule. I've just added a 3 TB external USB HD, giving me a 5 TB of total backup grunt. 3 TB External USB HD, was peanuts by comparison to Apple kit. So all working, its all solid as you'd expect.Apple 2, maybe me .5. But strong, solid backups now happening, without hassle (but a bit of a credit card bill to follow)

  Read the article

• LIfebook lh531 inbuilt card reader not working

  - by chandrasekar

  Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

  Read the article

• Can't install the wireless driver in HP Pavilion dv2419us

  - by maqtanim

  I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

  Read the article

• how to install Ubuntu on a fresh hard drive

  - by Herman Wiegman

  I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

  Read the article

• Updating the jump in game

  - by Luka Tiger

  I am making a Java game and I want my game to run the same on any FPS so I'm using time delta between each update. This is the update method of the Player: public void update(long timeDelta) { //speed is the movement speed of a player on X axis //timeDelta is expressed in nano seconds so I'm dividing it with 1000000000 to express it in seconds if (Input.keyDown(37)) this.velocityX -= speed * (timeDelta / 1000000000.0); if (Input.keyDown(39)) this.velocityX += speed * (timeDelta / 1000000000.0); if(Input.keyPressed(38)) { this.velocityY -= 6; } velocityY += g * (timeDelta/1000000000.0); //applying gravity move(velocityX, velocityY); /*this is method which moves a player according to velocityX and velocityY, and checking the collision */ this.velocityX = 0.0; } The strange thing is that when I have unlimited FPS (and update number) my player is jumping about 10 blocks. It jumps even higher when the FPS is increasing. If I limit FPS it is jumping 4 blocks. (BLOCK: 32x32) I have just realized that the problem is this: if(Input.keyPressed(38)) { this.velocityY -= 6; } I add -6 to velocityY which increases player's Y proportionally to the update number and not to the time. But I don't know how to fix this.

  Read the article

• Ubuntu is not detecting my android device

  - by user3514160

  I am new to android. I have just downloaded and installed android sdk. Now when I run the application from eclipse, my device is not getting detected. I have googled and was brought up with this as my solution, but that also didn't worked. Here's the 51-android.rules SUBSYSTEMS=="usb", ATTR{idProduct}=="0bb4", ATTR{idProduct}=="0c03", MODE="0666", GROUP="plugindev", OWNER="<username>" After that I rebooted my laptop, and ran this command: username@laptopname:~/Android/adt-bundle/sdk/platform-tools$ adb devices The output i get is: * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached ???????????? no permissions EDIT crazydeveloper@crazydeveloper:~$ lsusb Bus 002 Device 004: ID 0bb4:0c03 HTC (High Tech Computer Corp.) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b337 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/004/ ls: cannot access /dev/bus/usb/004/: No such file or directory crazydeveloper@crazydeveloper:~$ Edit: 2 After the answer submitted here's the output that i got: crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/002 total 0 crw-rw-r-- 1 root root 189, 128 May 7 09:45 001 crw-rw-r--+ 1 root root 189, 129 May 7 09:45 002 crw-rw-rw- 1 root plugdev 189, 130 May 7 09:48 003 I am using Micromax Canvas 2.2 A114 - Android Version 4.2.2 Please help me. Thanks.

  Read the article

• Is there supposed to be a Windows Network folder in the file manager?

  - by Cindy

  I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

  Read the article

• Keyboard and mouse/touchpad wont work in 11.10

  - by Maynard

  I installed Ubuntu 11.10 onto my Fujitsu Lifebook N5010 Laptop yesterday and all seemed good up until this morning. My key board and mouse/touchpad no longer work. I can, however, plug in a usb mouse and that works so I am able to shut the laptop off. With the usb mouse plugged in I still can't use the keyboard so the only thing the mouse is good for is shutting the system down. When I first boot the system the mouse/touchpad and keyboard will work long enough so that I can log in my password but then after about 20 seconds or so the mouse/touchpad and keyboard stop working. I have searched the internet for answers and haven't found anything that is working for me. Someone suggested I type a particular command into the terminal but not real sure how I do that without a keyboard. And going out to buy a usb keyboard (assuming that would work) and usb mouse still doesn't fix the problem. Anybody have any suggestions I would REALLY appreciate it. I love Ubuntu but this is just not good.

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• moving in the wrong direction

  - by Will

  Solution: To move a unit forward: forward = Quaternion(0,0,0,1) rotation.normalize() # ocassionally ... pos += ((rotation * forward) * rotation.conjugated()).xyz().normalized() * speed I think the trouble stemmed from how the Euclid math library was doing Quaternion*Vector3 multiplication, although I can't see it. I have a vec3 position, a quaternion for rotation and a speed. I compute the player position like this: rot *= Quaternion().rotate_euler(0.,roll_speed,pitch_speed) rot.normalize() pos += rot.conjugated() * Vector3(0.,0.,-speed) However, printing the pos to console, I can see that I only ever seem to travel on the x-axis. When I draw the scene using the rot quaternion to rotate my camera, it shows a proper orientation. What am I doing wrong? Here's an example: You start off with rotation being an identity quaternion: w=1,x=0,y=0,z=0 You move forward; the code correctly decrements the Z You then pitch right over to face the other way; if you spin only 175deg it'll go in right direction; you have to spin past 180deg. It doesn't matter which direction you spin in, up or down, though Your quaternion can then be something like: w=0.1,x=0.1,y=0,z=0 And moving forward, you actually move backward?! (I am using the euclid Python module, but its the same as every other conjulate) The code can be tried online at http://williame.github.com/ludum_dare_24_evolution/ The only key that adjusts the speed is W and S. The arrow keys only adjust the pitch/roll. At first you can fly ok, but after a bit of weaving around you end up getting sucked towards one of the sides. The code is https://github.com/williame/ludum_dare_24_evolution/blob/cbacf61a7159d2c83a2187af5f2015b2dde28687/tiny1web.py#L102

  Read the article

• Dual Booting WIndows 7 and Ubuntu 12.04

  - by mfes

  I have Windows 7 32 bit installed on a 64 bit Laptop. I am trying to install Ubuntu 12.04.I am trying to install Ubuntu 12.04 using USB. I created the bootable usb using live usb installer. I have 6 partitions in Windows 7 of which in Windows 7, I created a partition of 50 GB and also having an unallocated space of 50 Gb. I will install Ubuntu 12.04 in any one of these space. When I am booting from USB and selecting the option of "Try Ubuntu" and In Ubuntu desktop, when I click "Install Ubuntu 12.04" , and choosing the option as " Something Else " ( I dont want to Install Ubuntu alongside Windows or want to erase Windows totally ), only 3 paritions getting listed. One is system memory reserved as 100 mb. Second is C drive and third partition is listed as a whole space ie remaining space of the entire hard disk is listed instead of partitions. I tried Gparted Editor and it also lists the same as Ubuntu 12.04 So whats the problem and how can I make the Ubuntu to detect all the partitions so that I can install in the unallocated space or in the 50 GB Partition ? ( P.S - When I try the same in my 32 bit desktop, it is detecting all the partitions )

  Read the article

• Problem installing Ubuntu 14.04 into a laptop using Windows 8.1

  - by AlexanderFreud

  I have used Ubuntu on my LG laptop for several years. I lately bought an Acer Aspire V5 laptop which included Windows 8.1. I don't have any data on it; I would like to just remove it completely (that horrible Windows 8.1) and install Ubuntu. I tried using a USB device with Ubuntu 14.04 (64bit version) saved on it. I changed the BIOS configuration, putting USB device first on boot order, Windows Boot Manager last. When I try to run with USB device it doesn't work. Messages like these show up: System doesn't have any USB boot option. Please select other boot option in Boot Manager Menu. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. insert your windows installation disc and restart your computer 2. choose your language settings, and then click "next" 3. click "repair your computer" If you do not have this disk, contact your system administrator manufacturer for assistance File \ubuntu\winboot\wubildr.mbr Status: 0xc000007b Info: the application or operating system couldn't be load...[?] required file is missing or contains errors. Could someone please write step-by-step procedures to install Ubuntu 14.04 after removing Windows 8.1 ? I already have done a second partition on the hard disk just in case.

  Read the article

• Android FTP seek Bar issue

  - by Androi Developer

  I am trying to Upload & Download file to server using FTP and Download File using HTTP i am able to do this, my problem is when i am trying to show seek bar with Upload status of file using ftp then it's not showing. In this attached image Using HTTP it's showing seekbar with Network spped like this i need to display seek bar & Network sppeed in FTP. Below code i wrote for FTP to upload file into server. Code:-- // Upload System.out.println("upload test is called"); //Toast.makeText(con, "upload FTP test is called", Toast.LENGTH_SHORT).show(); //ContextWrapper context = null; //assetManager= context.getAssets(); assetManager = getResources().getAssets(); input1 = assetManager.open("hello.txt"); final long started = System.currentTimeMillis(); int size = input1.available(); //byte[] buffer = new byte[size]; byte dataByte[] = new byte[1024]; //input1.read(buffer); //String data = "ZK DATA TESTER TEST DATA1sdfsdf"; String data = input1.toString(); System.out.println("dat value is........"+data); final int lenghtOfFile = data.getBytes().length; //final int lenghtOfFile = input1.getBytes().length; System.out.println("length of file....."+lenghtOfFile); ByteArrayInputStream in = new ByteArrayInputStream( data.getBytes()); //toast("Uploading /test.txt"); //Toast.makeText(con,"File Size : " +data.getBytes().length + " bytes",Toast.LENGTH_SHORT).show(); //byte b[] = new byte[1024]; long total = 0; long sleepingTime= 0; System.out.println("started time --"+started); updateUI(status, "Uploading"); while ((count = in.read(dataByte)) != -1) { System.out.println("read value is...."+in.read(dataByte)); while (sleep1) { Thread.sleep(1000); System.out.println("ftp upload is in sleeping mode"); sleepingTime +=1000; } System.out.println("Total count --"+count); total += count; System.out.println("Only Total --"+total); final int progress = (int) ((total * 100) / lenghtOfFile); final long speed = total; //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; boolean result = ObjFtpCon.storeFile("/test.txt", input1); //boolean result = ObjFtpCon.storeFile(map.get("file_address").toString()+"/test.txt", input1); duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; /* runOnUiThread(new Runnable() { public void run() { bar.setProgress(progress); // trans.setText("" + progress); //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; //real_time.setText(duration + " secs"); if (duration != 0) { test_avg.setText((((speed / duration)*1000)*0.0078125) + " kbps"); if (pk <= (speed / duration) / 1024) { pk = (speed / duration) / 1024; } if (pk <= ((speed / duration)*1000)*0.0078125) { pk = (long)(((speed / duration)*1000)*0.0078125); } //peak.setText(pk + " kbps"); } } });*/ //in.close(); if (result) { updateUI(status, "Uploaded"); // toast("Uploading succeeded"); // toast("Uploaded at /test.txt"); //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; System.out.println("curreent time..... "+System.currentTimeMillis()); System.out.println("started time --"+started); System.out.println("sleep tome...."+sleepingTime); System.out.println("duration is....."+duration); runOnUiThread(new Runnable() { public void run() { bar.setProgress(progress); // trans.setText("" + progress); //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; real_time.setText(duration + " secs"); if (duration != 0) { test_avg.setText((speed / duration) / 1024 + " kbps"); if (pk <= (speed / duration) / 1024) { pk = (speed / duration) / 1024; } peak.setText(pk + " kbps"); } } }); } /*while(!result){Thread.sleep(1000);}*/ } in.close();

  Read the article

• bluetooth not working on Ubuntu 13.10

  - by iacopo

  I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

  Read the article

• Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

  - by Ritwik

  I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >