Search Results

Search found 13871 results on 555 pages for 'ie8 compatibility mode'.

Page 164/555 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• what Windowx XP LAN driver for Asus F5Z

  - by Radek

  a friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed succcessfully all drivers from assus driver download site. Everything is working fine but ethernet driver. The installation of Lan Driver for WIN XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• Windows 7 Wakeup from Sleep then Shutdown

  - by Kevin Hua

  Is this caused by low battery? I have an Asus UX31A, and I left it unattended. As usual, in 5 minutes, it went to sleep mode with the lid still open. I came back a couple hours later, and I noticed the laptop was off. I was still able to turn it on by manually pressing the power button (battery was at 2% though), but I don't understand why it shut off. If it was in sleep mode and the battery was near depletion, then wouldn't that result in a "Windows has recovered from an unexpected shutdown" upon boot? Does Windows have a mechanism to wake from sleep from a super critical battery level to shut down all programs and power down the system completely? I noticed that upon booting, firefox didn't give a fit about improper shutdown. Here are my power settings btw, powercfg -h off has been ran, so hibernation is off. And here is the event log: http://www.mediafire.com/download.php?lbfhl21g0nj2adi

  Read the article

• Sony Bravia KDL-32L5000 PC resolution slightly off

  - by user18818

  I have a PC running two Nvidia 8500 GTs in SLI mode and I am trying to use my TV in dual mode. When I switch the TV to PC the screen is nearly centered with a slight offset. All resolutions are effected from 800x600 all the way up to the TVs native 1360x768. I have tried with SLI on and off and have PhysX turned off as well as I thought that might have an effect. I am running Windows XP 64-bit SP2 DirectX ver 9.0c Nvidia driver version 181.22 Any other information please let me know. Thanks in advance.

  Read the article

• Converting a .bat executable to Mac

  - by Wes

  I need some help converting a .bat executable file that I run on our PC at my job so that it works on a mac. Before we upload tar files to our website we run this script which to the best of my knowledge simply unlocks all of the permissions to the tar and all the images within. If someone could help me in "translating" it to run on my Mac that would be awesome! I was hoping I could set up something in Automator Here's the code del images5.tar move images4.tar images5.tar move images3.tar images4.tar move images2.tar images3.tar move images.tar images2.tar cd .. tar --mode=777 -rvf images.tar *.jpg tar --mode=777 -rvf images.tar p move images.tar ./tarpics

  Read the article

• Am I obligated to install Windows Genuine Advantage Notifications to receive all Microsoft updates?

  - by Pieter

  Do I have to install WGA Notifications to receive all Microsoft updates? I currently don't have it on my hard drive, and I get a notification from Microsoft Update urging me to validate my copy of Windows XP. If I don't validate my copy, I don't get all updates. When I click the link however, I get an ActiveX error message. (Yes, I'm doing this in IE8.) Could this have something to do with my decision not to install WGA Notifications?

  Read the article

• Disable all 'Ctrl' key shortcuts in AutoHotkey?

  - by pelms

  I'm trying to lock down a kiosk PC and need to disable various 'Ctrl + key' keyboard shortcuts. I started by disabling them individually using AutoHotkey... ^F4::return ^w::return ^+w::return ^Esc::return ^+Esc::return ;etc... but keep discovering new ones shortcuts (did you know that 'Ctrl + Q' in IE8 displays a tab thumbnail page). So I tried to disable the Ctrl key completely using stuff like: LCtrl::return RCtrl::return ~Ctrl::return ^::return with no luck. Any ideas?

  Read the article

• error message when clicking on a hyperlink in Outlook 2010

  - by Chadworthington

  I have this exact problem with Outlook 2010 on Windows 7 Ultimate with IE8 loaded. But the fix is for earlier Windows and IE versions, I am wondering if there is a more graceful solution already devised for Windows 7. Any ideas?

  Read the article

• WinXP password messed up after reset

  - by Mark Flint

  I changed my winXP logon password - but could not get in. Obviously I made the some mistake twice... caps lock or something but couldn't get the password. So I booted into safe mode, when into Users and changed the password. Now I when I restart I can get in at logon with my new password, but the standard screensaver - which used to be the same as my user logon - now is something different. I think it's still the previous one which I couldn't get right. Now when I go into Users (not in safe mode) and try and change the password I can't. It won't accept my new user logon which works fine when logging on. I think this too is still the previous one which I couldn't get right. How can I definitely reset the password so it works at logon, in the control panel/users, and the screensaver?

  Read the article

• problem getting scanning to work on epson workforce 610

  - by thatisvaliant

  i installed the latest epson software on my user's computer. everything works fine from the admin account (printing / scanning). yet, when i go to user's account (the standard user mode account the company employee uses on there machine) and launch the epson scan software or scan settings software it times out and puts up a dialog box asking me if i want to use the trouble assistant. my question is why would this all work in the admin account yet not work in the user mode account? any help is greatly appreciated.

  Read the article

• vsFTPd and iptables - how to configure them in CentOS 5.5?

  - by Vincenzo

  I've installed vsFTPd in CentOS 5.5, on TWO servers, and added this rule to their iptable-s: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT Looks like this is not enough, since when I'm trying to upload a file from one server to another, I'm getting this result (IP address is masked): # ftp 99.99.99.99 Connected to …com (99.99.99.99). 220 (vsFTPd 2.0.5) Name (99.99.99.99:root): vinny 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 227 Entering Passive Mode (99,99,99,99,107,74) ftp: connect: No route to host I've found a few articles in the net about the second rule I have to add to iptables, but I didn't find the right syntax for it. Could you please help?

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Intel SASWT4I SAS/SATA Controller Question

  - by Joe Hopfgartner

  Hey there! I want to assemble a cheap storage sytem based on the Norco RPC-4020 Case. When searching for controllers I found this one: Intel® RAID Controller SASWT4I This is a quote form the Spec Sheet: Scalability. Supports up to 122 physical devices in SAS mode which is ideal for employing JBODs (Just a Bunch Of Disks) or up to 14 devices in RAID 0, 1, 1E/10E mode through direct connect device attachment or through expander backplane support. Does that mean I can attatch 14 SATA drives directly to the controller using SFF-8087 - 4x SATA breakout cables? That would be nice because then I can choose a mainboard that has 6 Onboard SATA and i can connect all 20 bays while only spending 155$ on the controller and like another 100$ on cables. Would that work? And why is it 14 and not 16 when there are 4 Ports? I am really confused about all the breakout/fanout/(edge-)expanding/multiplying/channel stuff...

  Read the article

• ubuntu fails to start

  - by miccaman

  I have a laptop with ubuntu 9.10 which fails to start, and I want to copy the data from it to an external hard disk. I can login in recovery mode command line, but then I cannot mount the external hard drive. (in recovery mode I cannot write to the laptops hard drive) If I boot from an portable USB with mintlinux, I can mount the external harddrive, and copy most of the data from the laptop, however there is a dir which I have no rights to access under /home/user/Documents then I get a permission denied error. Are there any other options?

  Read the article

• Configuring htaccess to show authentication prompt only for subdomain

  - by Philipp Lenssen

  How do I write the htaccess so that it will only require authentication when on admin.example.com, but not on www.example.com (like by using some if-else clause)? Background: I have a site running in two modes: The admin mode should be reached at something like admin.example.com, whereas the normal mode would be www.example.com -- but both should point to the same directory & scripts within them (the scripts then turn on certain editing features by checking if the script is accessed from the admin subdomain). Edit: I can now see this has been asked and answered at StackOverflow, though I can't get the top answer to work for me...

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• How can I open a console application with a given window size?

  - by Oliver Salzburg

  The application I want to start is MongoDB. If I would start it normally, it looks like this: I don't like the amount of line breaks and I have a lot of screen space, so I would like to utilize said space to get rid of the line breaks. I can change the size of the console window with MODE, so I wrote a batch file like this: @ECHO OFF MODE con:cols=140 lines=70 %~dp0mongodb\bin\mongod --dbpath %~dp0data --rest So far, so good. When I start this batch file, I get a larger window, as desired. But when I now press Ctrl+C to exit MongoDB, I get the annoying prompt: Terminate batch job (Y/N)? Which is useless, because the command I just exited out of was the last command in the batch job anyway and no matter what I answer, the result is the same. So, how can I get a larger console window for the application without having that prompt when I hit Ctrl+C?

  Read the article

• sendmail on Ubuntu won't send from www-data user

  - by bumperbox

  I if call mail() function in PHP from webserver (running as www-data) i get an error sending email. If i call the same script from the cmdline logged in as root, then it works If i switch user to www-data and run from the cmdline i get this error message WARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) can not chdir(/var/spool/mqueue-client/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. FAILEDWARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) can not chdir(/var/spool/mqueue-client/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. FAILEDTest Complete$ WARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) I am guessing i need to do something in sendmail configuration I have googled for some solutions but have ended up more confused. Can someone let me know what configuration I need to change to fix so i can send from www-data user?

  Read the article

• Problem in Displaying HTML Files' Icons in Win 7 ?

  - by Mohammad

  I have Windows 7 x64 (built 7600). I just installed Firefox 3.6 and I set it as my default browser, upon I've set that all of my HTML files were been without any icons! Could you please guide me how I can fix HTML files' icons when FF3.6 is my default browser? Thanks. P.S: Whenever I set IE8 as my default browser the HTML files' icons were fixed.

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• tmux: unbind C-[ as a prefix

  - by StanAngeloff

  I have a fairly straight forward .tmux.conf file which does nothing more but to define a couple of options, such as history-limit. I have not added any custom key bindings yet. I find it extremely annoying that I cannot unbind C-[ as a prefix in tmux. Here is what I mean: $ uname -a Linux stan-inspiron 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ tmux [0] 0:~* "stan-inspiron" 10:05 12-Jun-12 % vim Whilst inside vim, when I go to insert mode and then use C-[0 to escape insert mode and move to the first character on the line, tmux grabs the key first and complains: Window not found: :0 ** I tried all sorts of things in my .tmux.conf, but nothing works. I thought it might be a terminal or shell issue, but confirmed same behaviour on a configless machine using Bash and [Gnome] Terminal. So the question really is, how do I unbind the C-[ key from tmux? ** I have base-index 1 set.

  Read the article

• What is the command to use to put your computer to sleep (not hibernate)?

  - by airrick

  I want to put my windows pc (win7) into a sleep state via command line (so i can bind to macro button on keyboard). The power button on the PC is setup to but the computer to sleep (but it's down on the floor and I'm too lazy to reach down) it exactly how I want it (sleeps using hybrid mode in case I loose power) The sleep command on the shutdown menu also works. most info I found says to use; %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState 0,1,0 But this puts the computer in hibernate mode. I do have hibernate disabled but using hybrid sleep. So, What is the command to use to put your computer to sleep (not hibernate)?

  Read the article

• Service haproxy error

  - by user128296

  I want to configure Haproxy for outgoing mail load balancing. my configuration file /etc/haproxy.cfg is. global maxconn 4096 # Total Max Connections. This is dependent on ulimit daemon nbproc 4 # Number of processing cores. Dual Dual-core Opteron is 4 cores for example. defaults mode tcp listen smtp_proxy 199.83.95.71:25 mode tcp option tcplog balance roundrobin # Load Balancing algorithm ## Define your servers to balance server r23.lbsmtp.org 74.117.x.x:25 weight 1 maxconn 512 check server r15.lbsmtp.org 199.71.x.x:25 weight 1 maxconn 512 check And when i start service haproxy i get this error. Starting HAproxy: [ALERT] 244/172148 (7354) : cannot bind socket for proxy smtp_proxy. Aborting. Please tell me where i am doing mistake.help will appreciated.

  Read the article

• What did Emolator do with My Laptop?

  - by Garry

  I played SEGA with my KEGA.exe (Sega Emulator) and it made my right key to be malfunctioned. Befor that day, I had played it, too in my notebook with fullscreen mode, and suddenly my ACER Aspire One notebook restarted during that emulator was running and before the screen was black (boot), my screen was blue with many words but I couldn't read them, but I remember that there was a word like 000000 x 0000000 x 000000 and bla bla bla. And when I played without fullscreen mode, It didn't happened but it made my right key to be malfunctioned until when I went to Bot setup, my right key doesn't work. Do U know what is the problem of my emulator? Can U explain me for that?

  Read the article

• Internet Explorer - selected language is changing to English when opening a new window

  - by Amit

  When opening a new window in IE8 or IE9 (doesn't matter if using a link or window.open), my selected keyboard language is changing to English (doesn't matter what was the previous selection, tried it with a few different languages). This doesn't happen for me in Chrome or Firefox (all the browsers are installed in their English version), and I tested it in Windows 7 and Windows 2008R2. Is there any way to avoid that? If there isn't - supposing the new window is within my website or application, is there a way to change it back?

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >